Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)is a highly successful conductive polymer utilized as an electrode material in energy storage units for portable and wearable electronic de-vices.Neve...Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)is a highly successful conductive polymer utilized as an electrode material in energy storage units for portable and wearable electronic de-vices.Nevertheless,employing PEDOT:PSS in supercapacitors(SC)in its pristine state presents challenges due to its suboptimal electrochemical performance and operational instability.To surmount these limita-tions,PEDOT:PSS has been integrated with carbon-based materials to form flexible electrodes,which ex-hibit physical and chemical stability during SC operation.We developed a streamlined fabrication process for high-performance SC electrodes composed of PEDOT:PSS and carbon quantum dots(CQDs).The CQDs were synthesized under microwave irradiation,yielding green-and red-light emissions.Through optimiz-ing the ratios of CQDs to PEDOT:PSS,the SC electrodes were prepared using a spray-coating technique,marking a significant improvement in device performance with a high volumetric capacitance(104.10 F cm-3),impressive energy density(19.68 Wh cm^(-3)),and excellent cyclic stability,retaining~85% of its original volumetric capacitance after 15,000 repeated GCD cycles.Moreover,the SCs,when utilized as a flexible substrate,demonstrated the ability to maintain up to~85% of their electrochemical performance even after 3,000 bending cycles(at a bending angle of 60°).These attributes render this hybrid composite an ideal candidate for a lightweight smart energy storage component in portable and wearable electronic technologies.展开更多
The commercialized poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS)is usually used as hole transport layers(HTLs)in tin-based perovskite solar cells(TPSCs).However,the further development has been re...The commercialized poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS)is usually used as hole transport layers(HTLs)in tin-based perovskite solar cells(TPSCs).However,the further development has been restricted due to the acidity that could damage the stability of TPSCs.Although the PEDOT:PSS solution can be diluted by water to decrease acidity and reduce the cost of device fabrication,the electrical conductivity will decrease obviously in diluted PEDOT:PSS solution.Herein,potassium thiocyanate(KSCN)is selected to regulate the properties of PEDOT:PSS HTLs from the diluted PEDOT:PSS aqueous solution by water with a volume ratio of 1:1 to prepare efficient TPSCs.The effect of KSCN addition on the structure and photoelectrical properties of PEDOT:PSS HTLs and TPSCs have been systematically studied.At the optimal KSCN concentration,the TPSCs based on KSCN-doped PEDOT:PSS HTLs(KSCN-PSCs)demonstrate the champion power conversion efficiency(PCE)of 8.39%,while the reference TPSCs only show a champioan PCE of 6.70%.The further analysis demonstrates that the KSCN additive increases the electrical conductivity of HTLs prepared by the diluted PEDOT:PSS solution,improves the microstructure of perovskite film,and inhibits carrier recombination in TPSCs,leading to the reduced hysteresis effect and enhanced PCE in KSCN-PSCs.This work gives a low-cost and practical strategy to develop a high-quality PEDOT:PSS HTLs from diluted PEDOT:PSS aqueous solution for efficient TPSCs.展开更多
Huge volume changes of Si during lithiation/delithiation lead to regeneration of solid-electrolyte interphase(SEI)and consume electrolyte.In this article,γ-glycidoxypropyl trimethoxysilane(GOPS)was incorporated in Si...Huge volume changes of Si during lithiation/delithiation lead to regeneration of solid-electrolyte interphase(SEI)and consume electrolyte.In this article,γ-glycidoxypropyl trimethoxysilane(GOPS)was incorporated in Si/PEDOT:PSS electrodes to construct a flexible and conductive artificial SEI,effectively suppressing the consumption of electrolyte.The optimized electrode can maintain 1000 mAh g^−1 for nearly 800 cycles under limited electrolyte compared with 40 cycles of the electrodes without GOPS.Also,the optimized electrode exhibits excellent rate capability.The use of GOPS greatly improves the interface compatibility between Si and PEDOT:PSS.XPS Ar+etching depth analysis proved that the addition of GOPS is conducive to forming a more stable SEI.A full battery assembled with NCM 523 cathode delivers a high energy density of 520 Wh kg^−1,offering good stability.展开更多
基金supported by the National Research Foundation of Korea(NRF)through a grant provided by the Korean government(No.NRF-2021R1F1A1063451).
文摘Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)is a highly successful conductive polymer utilized as an electrode material in energy storage units for portable and wearable electronic de-vices.Nevertheless,employing PEDOT:PSS in supercapacitors(SC)in its pristine state presents challenges due to its suboptimal electrochemical performance and operational instability.To surmount these limita-tions,PEDOT:PSS has been integrated with carbon-based materials to form flexible electrodes,which ex-hibit physical and chemical stability during SC operation.We developed a streamlined fabrication process for high-performance SC electrodes composed of PEDOT:PSS and carbon quantum dots(CQDs).The CQDs were synthesized under microwave irradiation,yielding green-and red-light emissions.Through optimiz-ing the ratios of CQDs to PEDOT:PSS,the SC electrodes were prepared using a spray-coating technique,marking a significant improvement in device performance with a high volumetric capacitance(104.10 F cm-3),impressive energy density(19.68 Wh cm^(-3)),and excellent cyclic stability,retaining~85% of its original volumetric capacitance after 15,000 repeated GCD cycles.Moreover,the SCs,when utilized as a flexible substrate,demonstrated the ability to maintain up to~85% of their electrochemical performance even after 3,000 bending cycles(at a bending angle of 60°).These attributes render this hybrid composite an ideal candidate for a lightweight smart energy storage component in portable and wearable electronic technologies.
基金sponsored by Guangzhou Basic and Applied Basic Research Foundation(No.303523)。
文摘The commercialized poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS)is usually used as hole transport layers(HTLs)in tin-based perovskite solar cells(TPSCs).However,the further development has been restricted due to the acidity that could damage the stability of TPSCs.Although the PEDOT:PSS solution can be diluted by water to decrease acidity and reduce the cost of device fabrication,the electrical conductivity will decrease obviously in diluted PEDOT:PSS solution.Herein,potassium thiocyanate(KSCN)is selected to regulate the properties of PEDOT:PSS HTLs from the diluted PEDOT:PSS aqueous solution by water with a volume ratio of 1:1 to prepare efficient TPSCs.The effect of KSCN addition on the structure and photoelectrical properties of PEDOT:PSS HTLs and TPSCs have been systematically studied.At the optimal KSCN concentration,the TPSCs based on KSCN-doped PEDOT:PSS HTLs(KSCN-PSCs)demonstrate the champion power conversion efficiency(PCE)of 8.39%,while the reference TPSCs only show a champioan PCE of 6.70%.The further analysis demonstrates that the KSCN additive increases the electrical conductivity of HTLs prepared by the diluted PEDOT:PSS solution,improves the microstructure of perovskite film,and inhibits carrier recombination in TPSCs,leading to the reduced hysteresis effect and enhanced PCE in KSCN-PSCs.This work gives a low-cost and practical strategy to develop a high-quality PEDOT:PSS HTLs from diluted PEDOT:PSS aqueous solution for efficient TPSCs.
基金The work is supported by Science and Technology Commission of Shanghai Municipality(20520710400)National Natural Science Foundation of China(21771124)+1 种基金Oceanic Interdisciplinary Program(project number SL2020MS020)SJTU-Warwick Joint Seed Fund(2019/20)of Shanghai Jiao Tong University.
文摘Huge volume changes of Si during lithiation/delithiation lead to regeneration of solid-electrolyte interphase(SEI)and consume electrolyte.In this article,γ-glycidoxypropyl trimethoxysilane(GOPS)was incorporated in Si/PEDOT:PSS electrodes to construct a flexible and conductive artificial SEI,effectively suppressing the consumption of electrolyte.The optimized electrode can maintain 1000 mAh g^−1 for nearly 800 cycles under limited electrolyte compared with 40 cycles of the electrodes without GOPS.Also,the optimized electrode exhibits excellent rate capability.The use of GOPS greatly improves the interface compatibility between Si and PEDOT:PSS.XPS Ar+etching depth analysis proved that the addition of GOPS is conducive to forming a more stable SEI.A full battery assembled with NCM 523 cathode delivers a high energy density of 520 Wh kg^−1,offering good stability.
