The stacking of multiple defect-rich grain boundaries(GBs)along the long transportation path(~3μm)of charge carriers in printable mesoscopic perovskite solar cells(p-MPSCs)impedes their power conversion efficiency(PC...The stacking of multiple defect-rich grain boundaries(GBs)along the long transportation path(~3μm)of charge carriers in printable mesoscopic perovskite solar cells(p-MPSCs)impedes their power conversion efficiency(PCE).Organic Lewis bases are widely utilized for defect passivation at GBs,but how their passivation efficiency affects energy loss remains unclear.Here we employed triphenylphosphine(TPP)and triphenylphosphine oxide(TPPO)as the model passivators in p-MPSCs.TPPO has a more negatively charged center than TPP,which enables its stronger coordination with one of the most common and detrimental defects at the GBs—undercoordinated lead.When added into the perovskite with the same ratio,TPPO passivates defects more significantly and thus less TPPO remaining inactive compared with TPP.Inactive organic passivators accumulated at the GBs could impose barriers to charge carrier transportation.Indeed,TPPO improves the device performance more significantly with a champion PCE of 20.54%achieved.Besides,the TPPO devices demonstrate excellent stability with 95%of initial PCE remaining after 600 h of maximum power point tracking at(55±5)℃.展开更多
A field experiment of organic manure, passivator and their complex was conducted to study the soil Cd bioavailability in the Cd polluted paddy soil. The results showed that the rice yield increased with the applicatio...A field experiment of organic manure, passivator and their complex was conducted to study the soil Cd bioavailability in the Cd polluted paddy soil. The results showed that the rice yield increased with the applications of organic manure, passivator and their complex, especially, the rice yields of applying 3 000 and 6 000 kg/hm^2 of organic manure increased significantly by 18.6% （ P 〈0.05） and 20.9% （P 〈0.05） because of the increase of rice economic coefficient. There had no significant change of the soil pH values and the soil available Cd contents, but the Cd distribution ratios in rice were lowered by applying organic manure, and the Cd contents of rice applying 3 000 and 6 005 kg/hm^2 of organic manure dropped by 14.3% （ P 〉 0.05） and 21.4% （ P 〉 0.05） compared with chemical fertilizer treatment, respectively. But applying with passivator and passivator fertilized with 3 000 and 6 000 kg/hm^2 of organic manure, the soil pH values increased and the soil available Cd contents decreased significantly, so that to restrain the rice＇s Cd absorption and accumulation. The rice Cd contents lowered by 28.6% （ P 〈 0.05）, 28.6% （ P 〈 0.05） and 42.9% （ P 〈 0.05）, the stem C,d contents lowered by 8.9% （ P 〉 0.05）, 29.7% （ P 〈 0.05） and 43.6% （ P 〈 0.05）, and the leaf Cd contents decreased by 18.8% （ P 〈 0.05）, 25.0% （ P 〈 0.05） and 25.0% （ P 〈 0.05）, respectively. It enhanced the inactivate effect of passivator significantly when fertilized with organic manure.展开更多
The effects of 4 passivators, zeolite, lime, red mud and peanut shell biochar, on the fixation of Cd, Pb, Cu and Zn in acidic multi-metal contaminated soils were studied by passivator culture experiment in order to sc...The effects of 4 passivators, zeolite, lime, red mud and peanut shell biochar, on the fixation of Cd, Pb, Cu and Zn in acidic multi-metal contaminated soils were studied by passivator culture experiment in order to screen out the passivator with better fixation effects. The results showed that the soil pH values of zeolite, lime, red mud and peanut shell biochar increased significantly by 0.511.02, 0.821.29, 0.720.89 and 0.300.35 respectively. The effects of 4 passivators on the fixation of Cd and Zn in soil are lime>red mud>zeolite>peanut shell biochar. The order of effects on the fixation of Pb is red mud>lime>zeolite>peanut shell biochar. The order of the fixation effects of Cu is red mud>lime>peanut shell carbon>zeolite. The contents of Cd, Pb, Cu and Zn in the extractable state of CaCl2 decreased with the increase in the dosage of 4 passivators. Lime and red mud showed good fixation effects on Cd, Pb, Cu and Zn. The contents of Cd, Pb, Cu and Zn in the extractable state of CaCl2 at the low dosage(2.5 g/kg) of lime and red mud decreased by 41%, 84%, 76% and 83% respectively. Soil pH value was negatively correlated with CaCl2-Cd, Pb, Cu and Zn(P<0.01). Lime and red mud had significant fixation effects on Cd, Pb, Cu and Zn in acidic multi-metal contaminated soils at low application dosages.展开更多
Perovskite solar cells(PSCs) as a rising star in the photovoltaic field have received rapidly increasing attention recently due to the boosting power conversion efficiencies(PCEs) from 3.8% to 25.7% in the last13 year...Perovskite solar cells(PSCs) as a rising star in the photovoltaic field have received rapidly increasing attention recently due to the boosting power conversion efficiencies(PCEs) from 3.8% to 25.7% in the last13 years. Nevertheless, the conventional PSCs with three-dimensional(3D) halide perovskites as light absorbers suffer from inferior PCEs and poor durability under sunlight, high-temperature and humid conditions due to the high defect amount and structural instability of 3D perovskites, respectively. To tackle these crucial issues, lower-dimensional halide perovskites including zero-dimensional(0D), onedimensional(1D), and two-dimensional(2D) perovskites have been employed as efficient passivators to boost the PCEs and durability of 3D-PSCs due to the high structural stability and superior resistance against moisture, heat and sunlight. Therefore, in order to achieve better understanding about the advantages and superiorities of combining low-dimensional perovskites with their 3D counterparts in improving the PCEs and durability of 3D-PSCs, the recent advances in the development and fabrication of mixeddimensional PSCs with 1D/0D perovskites as passivators are summarized and discussed in the review.The superiority of 1D/0D perovskites as passivators over 2D counterparts, the passivation mechanism and the methods of 1D/0D perovskites are also presented and discussed. Furthermore, the rules to choose1D/0D perovskites or relevant spacer cations are also emphasized. On this basis, several specific strategies to design and fabricate mixed-dimensional PSCs with 1D/0D perovskites are presented and discussed.Finally, the crucial challenges and future research directions of mixed-dimensional PSCs with 1D/0D perovskites as passivators are also proposed and discussed. This review will provide some useful insights for the future development of high-efficiency and durable mixed-dimensional PSCs.展开更多
With the continuous development of society,the development of agricultural economy is also accelerating.Meanwhile,a large amount of sludge and waste materials enter the farmland system,and the state of soil heavy meta...With the continuous development of society,the development of agricultural economy is also accelerating.Meanwhile,a large amount of sludge and waste materials enter the farmland system,and the state of soil heavy metal pollution is becoming more and more serious.In order to ensure food security and the health of people’s lives,a large number of experts and scholars have begun to look for remediation methods for heavy metal contaminated soil.At present,the use of mineral passivators in the remediation technology of heavy metal contaminated soil is a new and healthy recovery method,and has received extensive attention.展开更多
Perovskite solar cells(PSCs)are regarded as promising candidates for future renewable energy production.High-density defects in the perovskite films,however,lead to unsatisfactory device performances.Here,poly(propyle...Perovskite solar cells(PSCs)are regarded as promising candidates for future renewable energy production.High-density defects in the perovskite films,however,lead to unsatisfactory device performances.Here,poly(propylene glycol)bis(2-aminopropyl ether)(PEA)additive is utilized to passivate the trap states in perovskite.The PEA molecules chemically interact with lead ions in perovskite,considerably passivate surface and bulk defects,which is in favor of charge transfer and extraction.Furthermore,the PEA additive can efficiently block moisture and oxygen to prolong the device lifetime.As a result,PEA-treated MAPbI3(MA:CH3NH3)solar cells show increased power conversion efficiency(PCE)(from 17.18 to 18.87%)and good longterm stability.When PEA is introduced to(FAPbI3)1-x(MAPbBr3)x(FA:HC(NH2)2)solar cells,the PCE is enhanced from 19.66 to 21.60%.For both perovskites,their severe device hysteresis is efficiently relieved by PEA.展开更多
The interfaces of perovskite solar cells(PSCs)are well known to be rich in deep-level carrier traps,which serve as non-radiative recombination centers and limit the open-circuit voltage(Voc)and power conversion effici...The interfaces of perovskite solar cells(PSCs)are well known to be rich in deep-level carrier traps,which serve as non-radiative recombination centers and limit the open-circuit voltage(Voc)and power conversion efficiency(PCE)of PSCs.Defect chemistry and surface passivators have been researched extensively and mainly focused on the neutralization of uncoordinated lead or anion defects.Herein,a novel brominated passivator 2-bromophenethylammonium iodide(2-Br-PEAI)is introduced for a multi-functional passivation effect at the perovskite interface.The brominated species readily form 2D perovskite on top of the 3D perovskite and multi-interact with the 3D perovskite surface.Apart from the halide vacancy filling and anion bonding ability,the Br atoms on the benzene ring can interact with the FA cations via strong hydrogen bonding N-H…Br and interact with the[PbI_(6)]^(4−)inorganic framework.The interface defects in the PSCs are well passivated,minimizing non-radiative recombination and enhancing device performance.As a result,a champion PCE of 24.22%was achieved with high V_(oc)and fill factor.In addition,modified devices also showed enhanced operational stability(retention of>95%initial PCE after 400 h)and humidity resistance(>90%initial PCE maintained after 1500 h under~50%RH).展开更多
Vacuum-deposited perovskite light-emitting diodes(PeLEDs)have demonstrated significant potential for high-colorgamut active-matrix displays.Despite the rapid advance of green PeLEDs,red ones remain a considerable chal...Vacuum-deposited perovskite light-emitting diodes(PeLEDs)have demonstrated significant potential for high-colorgamut active-matrix displays.Despite the rapid advance of green PeLEDs,red ones remain a considerable challenge because of the inferior photophysical properties of vacuum-deposited red-light-emitting materials.Here,a rationally designed fluorine-modified phosphine oxide additive was introduced to in-situ passivate vacuum-deposited perovskites.The highly polar 2-F-TPPO incorporated perovskite films demonstrated enhanced photoluminescence quantum yield(PLQY),suppressed defects,and improved crystallinity.When implemented as active layers in PeLEDs,an external quantum efficiency(EQE)of 12.6%with an emission wavelength of 640 nm is achieved,which was 6 times higher compared to the previously reported most efficient vacuum-deposited red PeLEDs(EQE below 2%).Our findings lay the foundations for the further exploration of high-performance vacuum-deposited PeLEDs toward fullcolor perovskite displays.展开更多
Lead sulfide(PbS)colloidal quantum dot(CQD)photodiodes integrated with silicon-based readout integrated circuits(ROICs)offer a promising solution for the next-generation short-wave infrared(SWIR)imaging technology.Des...Lead sulfide(PbS)colloidal quantum dot(CQD)photodiodes integrated with silicon-based readout integrated circuits(ROICs)offer a promising solution for the next-generation short-wave infrared(SWIR)imaging technology.Despite their potential,large-size CQD photodiodes pose a challenge due to high dark currents resulting from surface states on nonpassivated(100)facets and trap states generated by CQD fusion.In this work,we present a novel approach to address this issue by introducing double-ended ligands that supplementally passivate(100)facets of halidecapped large-size CQDs,leading to suppressed bandtail states and reduced defect concentration.Our results demonstrate that the dark current density is highly suppressed by about an order of magnitude to 9.6 nA cm^(2) at -10 mV,which is among the lowest reported for PbS CQD photodiodes.Furthermore,the performance of the photodiodes is exemplary,yielding an external quantum efficiency of 50.8%(which corresponds to a responsivity of 0.532 A W^(-1))and a specific detectivity of 2.5×10^(12) Jones at 1300 nm.By integrating CQD photodiodes with CMOS ROICs,the CQD imager provides high-resolution(640×512)SWIR imaging for infrared penetration and material discrimination.展开更多
Patients with complete spinal cord injury retain the potential for volitional muscle activity in muscles located below the spinal injury level.However,because of prolonged inactivity,initial attempts to activate these...Patients with complete spinal cord injury retain the potential for volitional muscle activity in muscles located below the spinal injury level.However,because of prolonged inactivity,initial attempts to activate these muscles may not effectively engage any of the remaining neurons in the descending pathway.A previous study unexpectedly found that a brief clinical round of passive activity significantly increased volitional muscle activation,as measured by surface electromyography.In this study,we further explored the effect of passive activity on surface electromyographic signals during volitional control tasks among individuals with complete spinal cord injury.Eleven patients with chronic complete thoracic spinal cord injury were recruited.Surface electromyography data from eight major leg muscles were acquired and compared before and after the passive activity protocol.The results indicated that the passive activity led to an increased number of activated volitional muscles and an increased frequency of activation.Although the cumulative root mean square of surface electromyography amplitude for volitional control of movement showed a slight increase after passive activity,the difference was not statistically significant.These findings suggest that brief passive activity may enhance the ability to initiate volitional muscle activity during surface electromyography tasks and underscore the potential of passive activity for improving residual motor control among patients with motor complete spinal cord injury.展开更多
Organic–inorganic metal halide perovskites have attained extensive attention owing to their outstanding photovoltaic performances,but the existence of numerous defects in crystalline perovskites is still a serious co...Organic–inorganic metal halide perovskites have attained extensive attention owing to their outstanding photovoltaic performances,but the existence of numerous defects in crystalline perovskites is still a serious constraint for the further development of perovskite solar cells(PSCs).In particular,the rapid crystallization guided by anti-solvents leads to plenty of surficial and interfacial defects in perovskite films.Herein,we report the adoption of a pseudo-halide anion based ionic liquid additive,1-butyl-3-methylimidazolium thiocyanate(BMIMSCN)for growing ternary cation(CsFAMA,where FA=formamidinium and MA=methylammonium)perovskites with large-scale crystal grains and strong preferential orientation via the enhanced Ostwald ripening.Meanwhile,a novel halide-free passivator,benzylammonium formate(BAFa),was employed as a buffering layer on the perovskite films to suppress surface-dominated charge recombination.As a result,the cooperative effects of BMIMSCN additive and BAFa passivator lead to significant enhancements on fluorescence lifetime(from 79.41 to 201.01 ns),open-circuit voltage(from 1.13 to 1.19 V),photoelectric conversion efficiency(from 18.90%to 22.33%).Moreover,the BMIMSCN/BAFa-CsFAMA PSCs demonstrated greatly improved stability against moisture and heat.This work suggests a promising strategy to improve the quality of perovskite materials via reducing the surficial and interfacial defects by the synergistic effects of lattice doping and interface engineering.展开更多
Achieving high-quality perovskite films without surface defects is regarded as a crucial target for the development of durable high-performance perovskite solar cells.Additive engineering is commonly employed to simul...Achieving high-quality perovskite films without surface defects is regarded as a crucial target for the development of durable high-performance perovskite solar cells.Additive engineering is commonly employed to simultaneously control the growth of perovskite crystals and passivate defects.Here,4-(trifluoromethyl)benzoic anhydride(4-TBA)composed of benzene rings functionalized with carbonyl and trifluoromethyl groups was used as an example additive to study the characteristics of additives used for producing high-quality perovskites and controlling their surface properties.The interaction between4-TBA and perovskite precursor materials was investigated using density functional theory(DFT)simulations.The electron-rich carbonyl group efficiently passivated the under-coordinated lead-ion defects.Additionally,hydrogen bonding between trifluoromethyl and organic cations prevents the generation of cation vacancies.Because of its intrinsic hydrophobicity,the trifluoromethyl group simultaneously improves the moisture and heat stability of the film.4-TBA serves as a universal modifier for various perovskite compositions.The power conversion efficiency(PCE)of inverted perovskite solar cells(PSCs)based on methylammonium(MA)with 4-TBA was improved from 16.15%to 19.28%.Similarly,the PCE of inverted PSCs based on a cesium formamidinium MA(CsFAMA)perovskite film increased from20.72%to 23.58%,upon addition of 4-TBA.Furthermore,the moisture and thermal stability of 4-TBAtreated films and devices was significantly enhanced,along with prolonged device performance.Our work provides guidance on selecting the structure and functional groups that are essential for surface defect passivation and the production of high-quality perovskites.展开更多
Silicon-air batteries(SABs),a new type of semiconductor air battery,have a high energy density.However,some side reactions in SABs cause Si anodes to be covered by a passivation layer to prevent continuous discharge,a...Silicon-air batteries(SABs),a new type of semiconductor air battery,have a high energy density.However,some side reactions in SABs cause Si anodes to be covered by a passivation layer to prevent continuous discharge,and the anode utilization rate is low.In this work,reduced graphene oxide(RGO)fabricated via high-temperature annealing or L-ascorbic acid(L.AA)reduction was first used to obtain Si nanowires/RGO-1000(Si NWs/RGO-1000)and Si nanowires/RGO-L.AA(Si NWs/RGO-L.AA)composite anodes for SABs.It was found that RGO suppressed the passivation and self-corrosion reactions and that SABs using Si NWs/RGO-L.AA as the anode can discharge for more than 700 h,breaking the previous performance of SABs,and that the specific capacity was increased by 90.8%compared to bare Si.This work provides a new solution for the design of high specific capacity SABs with nanostructures and anode protective layers.展开更多
This paper reviews the current state of knowledge and advances on the stress-corrosion cracking(SCC)of Ti alloys subject to harsh corrosive environments in the deep sea,and presents the knowledge gaps and future direc...This paper reviews the current state of knowledge and advances on the stress-corrosion cracking(SCC)of Ti alloys subject to harsh corrosive environments in the deep sea,and presents the knowledge gaps and future directions.A comprehensive review of classifications and applications of Ti alloys for deep-sea engineering indicates that the near-αandα+βTi alloys with high strength and great weldability are the primary selection for deep-sea equipment.The role of residual stress,microstructure types,alloying elements and corrosive environmental factors on SCC performance of Ti alloys are also summarised.It is revealed that the Ti alloys with Widmanstatten structure show the lowest SCC susceptibility,and alloying of Nb,Mo and Al elements plays a positive role in the boost corrosion resistance of passive film.Syn-ergistic effects of environmental deep-sea factors include high hydrostatic pressure,low dissolved oxy-gen content,low temperature and decreasing pH levels intensify the SCC of Ti alloys by inducing local dissolution of the passive film and facilitating hydrogen-induced cracking at crack tip.The study also highlights future research requirements in SCC of Ti alloys in deep sea:including the set-up of unified and suitable methods of in-situ and simulated experiments,modeling and predicting of SCC behaviour in real situations,and exploring practical protective strategies specifically.These findings provide a refer-ence for further SCC mechanisms research and promote the microstructure optimisation and performance improvement of the advanced Ti alloy-based material systems for deep-sea engineering.展开更多
Through strategies such as process optimization,solvent selection,and component tuning,the crystallization of perovskite materials has been effectively controlled,enabling perovskite solar cells(PSCs)to achieve over 2...Through strategies such as process optimization,solvent selection,and component tuning,the crystallization of perovskite materials has been effectively controlled,enabling perovskite solar cells(PSCs)to achieve over 25%power conversion efficiency(PCE).However,as PCE continues to improve,interfacial issues within the devices have emerged as critical bottlenecks,hindering further performance enhancements.Recently,interfacial engineering has driven transformative progress,pushing PCEs to nearly 27%.Building upon these developments,this review first summarizes the pivotal role of interfacial modifications in elevating device performance and then,as a starting point,provides a comprehensive overview of recent advancements in normal,inverted,and tandem structure devices.Finally,based on the current progress of PSCs,preliminary perspectives on future directions are presented.展开更多
Passive acoustic monitoring(PAM)technology is increasingly becoming one of the mainstream methods for bird monitoring.However,detecting bird audio within complex natural acoustic environments using PAM devices remains...Passive acoustic monitoring(PAM)technology is increasingly becoming one of the mainstream methods for bird monitoring.However,detecting bird audio within complex natural acoustic environments using PAM devices remains a significant challenge.To enhance the accuracy(ACC)of bird audio detection(BAD)and reduce both false negatives and false positives,this study proposes a BAD method based on a Dual-Feature Enhancement Fusion Model(DFEFM).This method incorporates per-channel energy normalization(PCEN)to suppress noise in the input audio and utilizes mel-frequency cepstral coefficients(MFCC)and frequency correlation matrices(FCM)as input features.It achieves deep feature-level fusion of MFCC and FCM on the channel dimension through two independent multi-layer convolutional network branches,and further integrates Spatial and Channel Synergistic Attention(SCSA)and Multi-Head Attention(MHA)modules to enhance the fusion effect of the aforementioned two deep features.Experimental results on the DCASE2018 BAD dataset show that our proposed method achieved an ACC of 91.4%and an AUC value of 0.963,with false negative and false positive rates of 11.36%and 7.40%,respectively,surpassing existing methods.The method also demonstrated detection ACC above 92%and AUC values above 0.987 on datasets from three sites of different natural scenes in Beijing.Testing on the NVIDIA Jetson Nano indicated that the method achieved an ACC of 89.48%when processing an average of 10 s of audio,with a response time of only 0.557 s,showing excellent processing efficiency.This study provides an effective method for filtering non-bird vocalization audio in bird vocalization monitoring devices,which helps to save edge storage and information transmission costs,and has significant application value for wild bird monitoring and ecological research.展开更多
Gas quenching and vacuum quenching process are widely applied to accelerate solvent volatilization to induce nucleation of perovskites in blade-coating method.In this work,we found these two pre-crystallization proces...Gas quenching and vacuum quenching process are widely applied to accelerate solvent volatilization to induce nucleation of perovskites in blade-coating method.In this work,we found these two pre-crystallization processes lead to different order of crystallization dynamics within the perovskite thin film,resulting in the differences of additive distribution.We then tailor-designed an additive molecule named 1,3-bis(4-methoxyphenyl)thiourea to obtain films with fewer defects and holes at the buried interface,and prepared perovskite solar cells with a certified efficiency of 23.75%.Furthermore,this work also demonstrates an efficiency of 20.18%for the large-area perovskite solar module(PSM)with an aperture area of 60.84 cm^(2).The PSM possesses remarkable continuous operation stability for maximum power point tracking of T_(90)>1000 h in ambient air.展开更多
Tactile perception plays a vital role for the human body and is also highly desired for smart prosthesis and advanced robots.Compared to active sensing devices,passive piezoelectric and triboelectric tactile sensors c...Tactile perception plays a vital role for the human body and is also highly desired for smart prosthesis and advanced robots.Compared to active sensing devices,passive piezoelectric and triboelectric tactile sensors consume less power,but lack the capability to resolve static stimuli.Here,we address this issue by utilizing the unique polarization chemistry of conjugated polymers for the first time and propose a new type of bioinspired,passive,and bio-friendly tactile sensors for resolving both static and dynamic stimuli.Specifically,to emulate the polarization process of natural sensory cells,conjugated polymers(including poly(3,4-ethylenedioxythiophen e):poly(styrenesulfonate),polyaniline,or polypyrrole)are controllably polarized into two opposite states to create artificial potential differences.The controllable and reversible polarization process of the conjugated polymers is fully in situ characterized.Then,a micro-structured ionic electrolyte is employed to imitate the natural ion channels and to encode external touch stimulations into the variation in potential difference outputs.Compared with the currently existing tactile sensing devices,the developed tactile sensors feature distinct characteristics including fully organic composition,high sensitivity(up to 773 mV N^(−1)),ultralow power consumption(nW),as well as superior bio-friendliness.As demonstrations,both single point tactile perception(surface texture perception and material property perception)and two-dimensional tactile recognitions(shape or profile perception)with high accuracy are successfully realized using self-defined machine learning algorithms.This tactile sensing concept innovation based on the polarization chemistry of conjugated polymers opens up a new path to create robotic tactile sensors and prosthetic electronic skins.展开更多
Iron(Fe)nanoparticles and graphite(Gr)with different masses of bismuth trisulfide(Bi_(2)S_(3))were mixed by high-energy ball milling treatment to fabricate the corresponding composite iron anodes Bi_(2)S_(3)@Fe-Gr.The...Iron(Fe)nanoparticles and graphite(Gr)with different masses of bismuth trisulfide(Bi_(2)S_(3))were mixed by high-energy ball milling treatment to fabricate the corresponding composite iron anodes Bi_(2)S_(3)@Fe-Gr.The hydrogen evolution reaction and iron passivation process on these iron electrodes were investigated in alkaline and neutral solutions.The iron electrode Bi_(2)S_(3)-3@Fe-Gr(The additional amount of Bi_(2)S_(3)was 3 mg)revealed the strongest ability to inhibit hydrogen evolution among the iron electrodes of the present investigation,while the Bi_(2)S_(3)-6@Fe-Gr electrode(The additional amount of Bi_(2)S_(3)was 6 mg)delivered significant performance in inhibiting anodic passivation.This is because the high-energy ball milling process leads to the well-dispersion of Bi_(2)S_(3)and the changes in the surface of Fe nanoparticles,thereby slowing down the passivation of the iron electrode surface.展开更多
基金financial support from the National Natural Science Foundation of China(Grant numbers 22439001,52172198,51902117)the China Postdoctoral Science Foundation(Grant number BX20240123)the Fundamental Research Funds for the Central Universities(Grant number HUST:2024JYCXJJ043)。
文摘The stacking of multiple defect-rich grain boundaries(GBs)along the long transportation path(~3μm)of charge carriers in printable mesoscopic perovskite solar cells(p-MPSCs)impedes their power conversion efficiency(PCE).Organic Lewis bases are widely utilized for defect passivation at GBs,but how their passivation efficiency affects energy loss remains unclear.Here we employed triphenylphosphine(TPP)and triphenylphosphine oxide(TPPO)as the model passivators in p-MPSCs.TPPO has a more negatively charged center than TPP,which enables its stronger coordination with one of the most common and detrimental defects at the GBs—undercoordinated lead.When added into the perovskite with the same ratio,TPPO passivates defects more significantly and thus less TPPO remaining inactive compared with TPP.Inactive organic passivators accumulated at the GBs could impose barriers to charge carrier transportation.Indeed,TPPO improves the device performance more significantly with a champion PCE of 20.54%achieved.Besides,the TPPO devices demonstrate excellent stability with 95%of initial PCE remaining after 600 h of maximum power point tracking at(55±5)℃.
基金Supported by National Science and Technology Support Plan Project,China(2012BAD14B17-1)Key and Special Project of Hunan Province Science and Technology,China(2011FJ1002-3)
文摘A field experiment of organic manure, passivator and their complex was conducted to study the soil Cd bioavailability in the Cd polluted paddy soil. The results showed that the rice yield increased with the applications of organic manure, passivator and their complex, especially, the rice yields of applying 3 000 and 6 000 kg/hm^2 of organic manure increased significantly by 18.6% （ P 〈0.05） and 20.9% （P 〈0.05） because of the increase of rice economic coefficient. There had no significant change of the soil pH values and the soil available Cd contents, but the Cd distribution ratios in rice were lowered by applying organic manure, and the Cd contents of rice applying 3 000 and 6 005 kg/hm^2 of organic manure dropped by 14.3% （ P 〉 0.05） and 21.4% （ P 〉 0.05） compared with chemical fertilizer treatment, respectively. But applying with passivator and passivator fertilized with 3 000 and 6 000 kg/hm^2 of organic manure, the soil pH values increased and the soil available Cd contents decreased significantly, so that to restrain the rice＇s Cd absorption and accumulation. The rice Cd contents lowered by 28.6% （ P 〈 0.05）, 28.6% （ P 〈 0.05） and 42.9% （ P 〈 0.05）, the stem C,d contents lowered by 8.9% （ P 〉 0.05）, 29.7% （ P 〈 0.05） and 43.6% （ P 〈 0.05）, and the leaf Cd contents decreased by 18.8% （ P 〈 0.05）, 25.0% （ P 〈 0.05） and 25.0% （ P 〈 0.05）, respectively. It enhanced the inactivate effect of passivator significantly when fertilized with organic manure.
基金Supported by Special Fund for Scientific Research of the Ministry of Agriculture and Finance(Official Letter No.[2016]6 of the Ministry of Agriculture and Finance)National Science and Technology Support Program(2015BAD05B02)+1 种基金Natural Science Foundation of Hunan(2015JJ2081)Postdoctoral Sustentation Fund(2014M562110)~~
文摘The effects of 4 passivators, zeolite, lime, red mud and peanut shell biochar, on the fixation of Cd, Pb, Cu and Zn in acidic multi-metal contaminated soils were studied by passivator culture experiment in order to screen out the passivator with better fixation effects. The results showed that the soil pH values of zeolite, lime, red mud and peanut shell biochar increased significantly by 0.511.02, 0.821.29, 0.720.89 and 0.300.35 respectively. The effects of 4 passivators on the fixation of Cd and Zn in soil are lime>red mud>zeolite>peanut shell biochar. The order of effects on the fixation of Pb is red mud>lime>zeolite>peanut shell biochar. The order of the fixation effects of Cu is red mud>lime>peanut shell carbon>zeolite. The contents of Cd, Pb, Cu and Zn in the extractable state of CaCl2 decreased with the increase in the dosage of 4 passivators. Lime and red mud showed good fixation effects on Cd, Pb, Cu and Zn. The contents of Cd, Pb, Cu and Zn in the extractable state of CaCl2 at the low dosage(2.5 g/kg) of lime and red mud decreased by 41%, 84%, 76% and 83% respectively. Soil pH value was negatively correlated with CaCl2-Cd, Pb, Cu and Zn(P<0.01). Lime and red mud had significant fixation effects on Cd, Pb, Cu and Zn in acidic multi-metal contaminated soils at low application dosages.
基金supported by the National Natural Science Foundation of China (No. 22279057)。
文摘Perovskite solar cells(PSCs) as a rising star in the photovoltaic field have received rapidly increasing attention recently due to the boosting power conversion efficiencies(PCEs) from 3.8% to 25.7% in the last13 years. Nevertheless, the conventional PSCs with three-dimensional(3D) halide perovskites as light absorbers suffer from inferior PCEs and poor durability under sunlight, high-temperature and humid conditions due to the high defect amount and structural instability of 3D perovskites, respectively. To tackle these crucial issues, lower-dimensional halide perovskites including zero-dimensional(0D), onedimensional(1D), and two-dimensional(2D) perovskites have been employed as efficient passivators to boost the PCEs and durability of 3D-PSCs due to the high structural stability and superior resistance against moisture, heat and sunlight. Therefore, in order to achieve better understanding about the advantages and superiorities of combining low-dimensional perovskites with their 3D counterparts in improving the PCEs and durability of 3D-PSCs, the recent advances in the development and fabrication of mixeddimensional PSCs with 1D/0D perovskites as passivators are summarized and discussed in the review.The superiority of 1D/0D perovskites as passivators over 2D counterparts, the passivation mechanism and the methods of 1D/0D perovskites are also presented and discussed. Furthermore, the rules to choose1D/0D perovskites or relevant spacer cations are also emphasized. On this basis, several specific strategies to design and fabricate mixed-dimensional PSCs with 1D/0D perovskites are presented and discussed.Finally, the crucial challenges and future research directions of mixed-dimensional PSCs with 1D/0D perovskites as passivators are also proposed and discussed. This review will provide some useful insights for the future development of high-efficiency and durable mixed-dimensional PSCs.
基金Shaanxi Provincial Land Engineering Construction Group Internal Project(DJNY2019-21)。
文摘With the continuous development of society,the development of agricultural economy is also accelerating.Meanwhile,a large amount of sludge and waste materials enter the farmland system,and the state of soil heavy metal pollution is becoming more and more serious.In order to ensure food security and the health of people’s lives,a large number of experts and scholars have begun to look for remediation methods for heavy metal contaminated soil.At present,the use of mineral passivators in the remediation technology of heavy metal contaminated soil is a new and healthy recovery method,and has received extensive attention.
基金Financial support for this research is provided by the National Key Research Program of China(2016YFA0200104)the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB12030200).
文摘Perovskite solar cells(PSCs)are regarded as promising candidates for future renewable energy production.High-density defects in the perovskite films,however,lead to unsatisfactory device performances.Here,poly(propylene glycol)bis(2-aminopropyl ether)(PEA)additive is utilized to passivate the trap states in perovskite.The PEA molecules chemically interact with lead ions in perovskite,considerably passivate surface and bulk defects,which is in favor of charge transfer and extraction.Furthermore,the PEA additive can efficiently block moisture and oxygen to prolong the device lifetime.As a result,PEA-treated MAPbI3(MA:CH3NH3)solar cells show increased power conversion efficiency(PCE)(from 17.18 to 18.87%)and good longterm stability.When PEA is introduced to(FAPbI3)1-x(MAPbBr3)x(FA:HC(NH2)2)solar cells,the PCE is enhanced from 19.66 to 21.60%.For both perovskites,their severe device hysteresis is efficiently relieved by PEA.
基金supported by the National Natural Science Foundation of China(21872080)State Key Laboratory of Power System and Generation Equipment(No.SKLD21Z03,SKLD20M03)China Postdoctoral Science Foundation(No.043240004).
文摘The interfaces of perovskite solar cells(PSCs)are well known to be rich in deep-level carrier traps,which serve as non-radiative recombination centers and limit the open-circuit voltage(Voc)and power conversion efficiency(PCE)of PSCs.Defect chemistry and surface passivators have been researched extensively and mainly focused on the neutralization of uncoordinated lead or anion defects.Herein,a novel brominated passivator 2-bromophenethylammonium iodide(2-Br-PEAI)is introduced for a multi-functional passivation effect at the perovskite interface.The brominated species readily form 2D perovskite on top of the 3D perovskite and multi-interact with the 3D perovskite surface.Apart from the halide vacancy filling and anion bonding ability,the Br atoms on the benzene ring can interact with the FA cations via strong hydrogen bonding N-H…Br and interact with the[PbI_(6)]^(4−)inorganic framework.The interface defects in the PSCs are well passivated,minimizing non-radiative recombination and enhancing device performance.As a result,a champion PCE of 24.22%was achieved with high V_(oc)and fill factor.In addition,modified devices also showed enhanced operational stability(retention of>95%initial PCE after 400 h)and humidity resistance(>90%initial PCE maintained after 1500 h under~50%RH).
基金supported by the National Natural Science Foundation of China(62322505,62425502,62374069,62375060,62375276,U23A6002,and 62104077)Shanghai Pilot Program for Basic Research(22JC1403200)+2 种基金“Pioneer”and“Leading Goose”R&D Program of Zhejiang(2024C01192)the Natural Science Foundation of Hubei Province(2024AFB423 and 2023BAB102)the National Key Research and Development Program of China(2021YFB3501800,2023YFB3608903,2024YFA1209503).
文摘Vacuum-deposited perovskite light-emitting diodes(PeLEDs)have demonstrated significant potential for high-colorgamut active-matrix displays.Despite the rapid advance of green PeLEDs,red ones remain a considerable challenge because of the inferior photophysical properties of vacuum-deposited red-light-emitting materials.Here,a rationally designed fluorine-modified phosphine oxide additive was introduced to in-situ passivate vacuum-deposited perovskites.The highly polar 2-F-TPPO incorporated perovskite films demonstrated enhanced photoluminescence quantum yield(PLQY),suppressed defects,and improved crystallinity.When implemented as active layers in PeLEDs,an external quantum efficiency(EQE)of 12.6%with an emission wavelength of 640 nm is achieved,which was 6 times higher compared to the previously reported most efficient vacuum-deposited red PeLEDs(EQE below 2%).Our findings lay the foundations for the further exploration of high-performance vacuum-deposited PeLEDs toward fullcolor perovskite displays.
基金National Natural Science Foundation of China,Grant/Award Numbers:U22A2083,62204091,62374068National Key Research and Development Program of China,Grant/Award Number:2021YFA0715502+5 种基金Key R&D program of Hubei Province,Grant/Award Number:2021BAA014Innovation Project of Optics Valley Laboratory,Grant/Award Numbers:OVL2021BG009,OVL2023ZD002Exploration Project of Natural Science Foundation of Zhejiang Province,Grant/Award Number:LY23F040005Fund for Innovative Research Groups of the Natural Science Foundation of Hubei Province,Grant/Award Number:2020CFA034Fund from Science,Technology and Innovation Commission of Shenzhen Municipality,Grant/Award Numbers:GJHZ20210705142540010,GJHZ20220913143403007China Postdoctoral Science Foundation,Grant/Award Numbers:2021M691118,2022M711237,2022M721243,2023T160244。
文摘Lead sulfide(PbS)colloidal quantum dot(CQD)photodiodes integrated with silicon-based readout integrated circuits(ROICs)offer a promising solution for the next-generation short-wave infrared(SWIR)imaging technology.Despite their potential,large-size CQD photodiodes pose a challenge due to high dark currents resulting from surface states on nonpassivated(100)facets and trap states generated by CQD fusion.In this work,we present a novel approach to address this issue by introducing double-ended ligands that supplementally passivate(100)facets of halidecapped large-size CQDs,leading to suppressed bandtail states and reduced defect concentration.Our results demonstrate that the dark current density is highly suppressed by about an order of magnitude to 9.6 nA cm^(2) at -10 mV,which is among the lowest reported for PbS CQD photodiodes.Furthermore,the performance of the photodiodes is exemplary,yielding an external quantum efficiency of 50.8%(which corresponds to a responsivity of 0.532 A W^(-1))and a specific detectivity of 2.5×10^(12) Jones at 1300 nm.By integrating CQD photodiodes with CMOS ROICs,the CQD imager provides high-resolution(640×512)SWIR imaging for infrared penetration and material discrimination.
基金supported by the Fundamental Research Funds for Central Public Welfare Research Institute,No.2020CZ-5(to WS and GS)the National Natural Science Foundation of China,No.31970970(to JSR)Fundamental Research Funds for the Central Universities,No.YWF-23-YG-QB-010(to JSR)。
文摘Patients with complete spinal cord injury retain the potential for volitional muscle activity in muscles located below the spinal injury level.However,because of prolonged inactivity,initial attempts to activate these muscles may not effectively engage any of the remaining neurons in the descending pathway.A previous study unexpectedly found that a brief clinical round of passive activity significantly increased volitional muscle activation,as measured by surface electromyography.In this study,we further explored the effect of passive activity on surface electromyographic signals during volitional control tasks among individuals with complete spinal cord injury.Eleven patients with chronic complete thoracic spinal cord injury were recruited.Surface electromyography data from eight major leg muscles were acquired and compared before and after the passive activity protocol.The results indicated that the passive activity led to an increased number of activated volitional muscles and an increased frequency of activation.Although the cumulative root mean square of surface electromyography amplitude for volitional control of movement showed a slight increase after passive activity,the difference was not statistically significant.These findings suggest that brief passive activity may enhance the ability to initiate volitional muscle activity during surface electromyography tasks and underscore the potential of passive activity for improving residual motor control among patients with motor complete spinal cord injury.
基金the National Key R&D Program of China(No.2017YFA0208200)the National Natural Science Foundation of China(Nos.22022505,21872069,and 22109069)+3 种基金the Fundamental Research Funds for the Central Universities of China(Nos.020514380266,020514380272,and 020514380274)the Scientific and Technological Innovation Special Fund for Carbon Peak and Carbon Neutrality of Jiangsu Province(BK20220008)the Nanjing International Collaboration Research Program(Nos.202201007 and 2022SX00000955)the Suzhou Gusu Leading Talent Program of Science and Technology Innovation and Entrepreneurship in Wujiang District(No.ZXL2021273).
文摘Organic–inorganic metal halide perovskites have attained extensive attention owing to their outstanding photovoltaic performances,but the existence of numerous defects in crystalline perovskites is still a serious constraint for the further development of perovskite solar cells(PSCs).In particular,the rapid crystallization guided by anti-solvents leads to plenty of surficial and interfacial defects in perovskite films.Herein,we report the adoption of a pseudo-halide anion based ionic liquid additive,1-butyl-3-methylimidazolium thiocyanate(BMIMSCN)for growing ternary cation(CsFAMA,where FA=formamidinium and MA=methylammonium)perovskites with large-scale crystal grains and strong preferential orientation via the enhanced Ostwald ripening.Meanwhile,a novel halide-free passivator,benzylammonium formate(BAFa),was employed as a buffering layer on the perovskite films to suppress surface-dominated charge recombination.As a result,the cooperative effects of BMIMSCN additive and BAFa passivator lead to significant enhancements on fluorescence lifetime(from 79.41 to 201.01 ns),open-circuit voltage(from 1.13 to 1.19 V),photoelectric conversion efficiency(from 18.90%to 22.33%).Moreover,the BMIMSCN/BAFa-CsFAMA PSCs demonstrated greatly improved stability against moisture and heat.This work suggests a promising strategy to improve the quality of perovskite materials via reducing the surficial and interfacial defects by the synergistic effects of lattice doping and interface engineering.
基金supported by a Research Grant of Pukyong National University(2023)。
文摘Achieving high-quality perovskite films without surface defects is regarded as a crucial target for the development of durable high-performance perovskite solar cells.Additive engineering is commonly employed to simultaneously control the growth of perovskite crystals and passivate defects.Here,4-(trifluoromethyl)benzoic anhydride(4-TBA)composed of benzene rings functionalized with carbonyl and trifluoromethyl groups was used as an example additive to study the characteristics of additives used for producing high-quality perovskites and controlling their surface properties.The interaction between4-TBA and perovskite precursor materials was investigated using density functional theory(DFT)simulations.The electron-rich carbonyl group efficiently passivated the under-coordinated lead-ion defects.Additionally,hydrogen bonding between trifluoromethyl and organic cations prevents the generation of cation vacancies.Because of its intrinsic hydrophobicity,the trifluoromethyl group simultaneously improves the moisture and heat stability of the film.4-TBA serves as a universal modifier for various perovskite compositions.The power conversion efficiency(PCE)of inverted perovskite solar cells(PSCs)based on methylammonium(MA)with 4-TBA was improved from 16.15%to 19.28%.Similarly,the PCE of inverted PSCs based on a cesium formamidinium MA(CsFAMA)perovskite film increased from20.72%to 23.58%,upon addition of 4-TBA.Furthermore,the moisture and thermal stability of 4-TBAtreated films and devices was significantly enhanced,along with prolonged device performance.Our work provides guidance on selecting the structure and functional groups that are essential for surface defect passivation and the production of high-quality perovskites.
基金supported by the National Natural Science Foundation of China(No.61904073)Spring City Plan-Special Program for Young Talents(No.K202005007)+4 种基金Yunnan Talents Support Plan for Yong Talents(No.XDYC-QNRC-20220482)Yunnan Local Colleges Applied Basic Research Projects(No.202101BA070001-138)Scientific Research Fund of Yunnan Education Department(No.2023Y0883)Frontier Research Team of Kunming University 2023Key Laboratory of Artificial Microstructures in Yunnan Higher Education。
文摘Silicon-air batteries(SABs),a new type of semiconductor air battery,have a high energy density.However,some side reactions in SABs cause Si anodes to be covered by a passivation layer to prevent continuous discharge,and the anode utilization rate is low.In this work,reduced graphene oxide(RGO)fabricated via high-temperature annealing or L-ascorbic acid(L.AA)reduction was first used to obtain Si nanowires/RGO-1000(Si NWs/RGO-1000)and Si nanowires/RGO-L.AA(Si NWs/RGO-L.AA)composite anodes for SABs.It was found that RGO suppressed the passivation and self-corrosion reactions and that SABs using Si NWs/RGO-L.AA as the anode can discharge for more than 700 h,breaking the previous performance of SABs,and that the specific capacity was increased by 90.8%compared to bare Si.This work provides a new solution for the design of high specific capacity SABs with nanostructures and anode protective layers.
基金supported by the National Natural Science Foundation of China(Nos.51931008 and 52201090).
文摘This paper reviews the current state of knowledge and advances on the stress-corrosion cracking(SCC)of Ti alloys subject to harsh corrosive environments in the deep sea,and presents the knowledge gaps and future directions.A comprehensive review of classifications and applications of Ti alloys for deep-sea engineering indicates that the near-αandα+βTi alloys with high strength and great weldability are the primary selection for deep-sea equipment.The role of residual stress,microstructure types,alloying elements and corrosive environmental factors on SCC performance of Ti alloys are also summarised.It is revealed that the Ti alloys with Widmanstatten structure show the lowest SCC susceptibility,and alloying of Nb,Mo and Al elements plays a positive role in the boost corrosion resistance of passive film.Syn-ergistic effects of environmental deep-sea factors include high hydrostatic pressure,low dissolved oxy-gen content,low temperature and decreasing pH levels intensify the SCC of Ti alloys by inducing local dissolution of the passive film and facilitating hydrogen-induced cracking at crack tip.The study also highlights future research requirements in SCC of Ti alloys in deep sea:including the set-up of unified and suitable methods of in-situ and simulated experiments,modeling and predicting of SCC behaviour in real situations,and exploring practical protective strategies specifically.These findings provide a refer-ence for further SCC mechanisms research and promote the microstructure optimisation and performance improvement of the advanced Ti alloy-based material systems for deep-sea engineering.
基金supported by National Natural Science Foundation of China(52302229,62404072)the Key Lab of Modern Optical Technologies of Education Ministry of China,Soochow University(KJS2425)+1 种基金Doctoral Foundation of Henan Polytech-nic University(B2024-72)Science and Technology Research Project of Jiangxi Provincial Department of Education(Grant No.GJJ2400702).
文摘Through strategies such as process optimization,solvent selection,and component tuning,the crystallization of perovskite materials has been effectively controlled,enabling perovskite solar cells(PSCs)to achieve over 25%power conversion efficiency(PCE).However,as PCE continues to improve,interfacial issues within the devices have emerged as critical bottlenecks,hindering further performance enhancements.Recently,interfacial engineering has driven transformative progress,pushing PCEs to nearly 27%.Building upon these developments,this review first summarizes the pivotal role of interfacial modifications in elevating device performance and then,as a starting point,provides a comprehensive overview of recent advancements in normal,inverted,and tandem structure devices.Finally,based on the current progress of PSCs,preliminary perspectives on future directions are presented.
基金supported by the Beijing Natural Science Foundation(5252014)the National Natural Science Foundation of China(62303063)。
文摘Passive acoustic monitoring(PAM)technology is increasingly becoming one of the mainstream methods for bird monitoring.However,detecting bird audio within complex natural acoustic environments using PAM devices remains a significant challenge.To enhance the accuracy(ACC)of bird audio detection(BAD)and reduce both false negatives and false positives,this study proposes a BAD method based on a Dual-Feature Enhancement Fusion Model(DFEFM).This method incorporates per-channel energy normalization(PCEN)to suppress noise in the input audio and utilizes mel-frequency cepstral coefficients(MFCC)and frequency correlation matrices(FCM)as input features.It achieves deep feature-level fusion of MFCC and FCM on the channel dimension through two independent multi-layer convolutional network branches,and further integrates Spatial and Channel Synergistic Attention(SCSA)and Multi-Head Attention(MHA)modules to enhance the fusion effect of the aforementioned two deep features.Experimental results on the DCASE2018 BAD dataset show that our proposed method achieved an ACC of 91.4%and an AUC value of 0.963,with false negative and false positive rates of 11.36%and 7.40%,respectively,surpassing existing methods.The method also demonstrated detection ACC above 92%and AUC values above 0.987 on datasets from three sites of different natural scenes in Beijing.Testing on the NVIDIA Jetson Nano indicated that the method achieved an ACC of 89.48%when processing an average of 10 s of audio,with a response time of only 0.557 s,showing excellent processing efficiency.This study provides an effective method for filtering non-bird vocalization audio in bird vocalization monitoring devices,which helps to save edge storage and information transmission costs,and has significant application value for wild bird monitoring and ecological research.
基金supported by National Natural Science Foundation of China(62104082)Guangdong Basic and Applied Basic Research Foundation(2022A1515010746,2022A1515011228,and 2022B1515120006)the Science and Technology Program of Guangzhou(202201010458).
文摘Gas quenching and vacuum quenching process are widely applied to accelerate solvent volatilization to induce nucleation of perovskites in blade-coating method.In this work,we found these two pre-crystallization processes lead to different order of crystallization dynamics within the perovskite thin film,resulting in the differences of additive distribution.We then tailor-designed an additive molecule named 1,3-bis(4-methoxyphenyl)thiourea to obtain films with fewer defects and holes at the buried interface,and prepared perovskite solar cells with a certified efficiency of 23.75%.Furthermore,this work also demonstrates an efficiency of 20.18%for the large-area perovskite solar module(PSM)with an aperture area of 60.84 cm^(2).The PSM possesses remarkable continuous operation stability for maximum power point tracking of T_(90)>1000 h in ambient air.
基金financially supported by the Sichuan Science and Technology Program(2022YFS0025 and 2024YFFK0133)supported by the“Fundamental Research Funds for the Central Universities of China.”。
文摘Tactile perception plays a vital role for the human body and is also highly desired for smart prosthesis and advanced robots.Compared to active sensing devices,passive piezoelectric and triboelectric tactile sensors consume less power,but lack the capability to resolve static stimuli.Here,we address this issue by utilizing the unique polarization chemistry of conjugated polymers for the first time and propose a new type of bioinspired,passive,and bio-friendly tactile sensors for resolving both static and dynamic stimuli.Specifically,to emulate the polarization process of natural sensory cells,conjugated polymers(including poly(3,4-ethylenedioxythiophen e):poly(styrenesulfonate),polyaniline,or polypyrrole)are controllably polarized into two opposite states to create artificial potential differences.The controllable and reversible polarization process of the conjugated polymers is fully in situ characterized.Then,a micro-structured ionic electrolyte is employed to imitate the natural ion channels and to encode external touch stimulations into the variation in potential difference outputs.Compared with the currently existing tactile sensing devices,the developed tactile sensors feature distinct characteristics including fully organic composition,high sensitivity(up to 773 mV N^(−1)),ultralow power consumption(nW),as well as superior bio-friendliness.As demonstrations,both single point tactile perception(surface texture perception and material property perception)and two-dimensional tactile recognitions(shape or profile perception)with high accuracy are successfully realized using self-defined machine learning algorithms.This tactile sensing concept innovation based on the polarization chemistry of conjugated polymers opens up a new path to create robotic tactile sensors and prosthetic electronic skins.
文摘Iron(Fe)nanoparticles and graphite(Gr)with different masses of bismuth trisulfide(Bi_(2)S_(3))were mixed by high-energy ball milling treatment to fabricate the corresponding composite iron anodes Bi_(2)S_(3)@Fe-Gr.The hydrogen evolution reaction and iron passivation process on these iron electrodes were investigated in alkaline and neutral solutions.The iron electrode Bi_(2)S_(3)-3@Fe-Gr(The additional amount of Bi_(2)S_(3)was 3 mg)revealed the strongest ability to inhibit hydrogen evolution among the iron electrodes of the present investigation,while the Bi_(2)S_(3)-6@Fe-Gr electrode(The additional amount of Bi_(2)S_(3)was 6 mg)delivered significant performance in inhibiting anodic passivation.This is because the high-energy ball milling process leads to the well-dispersion of Bi_(2)S_(3)and the changes in the surface of Fe nanoparticles,thereby slowing down the passivation of the iron electrode surface.
