AIMTo evaluate intra-session repeatability and reproducibility of optical quality parameters measured at objective and subjective best focuses in a double-pass system.METHODSThirty Chinese healthy adults (19 to 40 yea...AIMTo evaluate intra-session repeatability and reproducibility of optical quality parameters measured at objective and subjective best focuses in a double-pass system.METHODSThirty Chinese healthy adults (19 to 40 years old) meeting our inclusion criterion were enrolled in the study. After a basic eye examination, two methods of optical quality measurement, based on subjective and objective best focuses were performed using the Optical Quality Analysis System (OQAS) with an artificial pupil diameter of 4.0 mm.RESULTSWith each method, three consecutive measurements of the following parameters: the modulation transfer function cutoff frequency (MTF<sub>cutoff</sub>), the Strehl<sup>2D</sup> ratio, the OQAS values (OVs) at contrasts of 100%, 20%, 9% and the objective scatter index (OSI) were performed by an experienced examiner. The repeatability of each method was evaluated by the repeatability limit (RL) and the coefficient of repeatability (COR). Reproducibility of the two methods was evaluated by intra-class correlation coefficient (ICC) and the 95% limits of agreement (Bland and Altman analysis). Thirty subjects, seven females and twenty three males, of whom 15 right eyes and 15 left eyes were selected randomly for recruitment in the study. The RLs (percentage) for the six parameters measured at objective focus and subjective focus ranged from 8.44% to 15.13% and 10.85% to 16.26%, respectively. The CORs for the two measurement methods ranged from 8.27% to 14.83% and 10.63% to 15.93%, respectively. With regard to reproducibility, the ICCs for the six parameters of OQAS ranged from 0.024 to 0.276. The 95% limits of agreement obtained for the six parameters (in comparison of the two methods) ranged from -0.57 to 42.18 (MTF<sub>cutoff</sub>), -0.01 to 0.23 (Strehl<sup>2D</sup> ratio), -0.02 to 1.40 (OV<sub>100%</sub>), -0.10 to 1.75 (OV<sub>20%</sub>), -0.14 to 1.80 (OV<sub>9%</sub>) and -1.46 to 0.18 (OSI).CONCLUSIONMeasurements provided by OQAS with either method showed a good repeatability. However, the results obtained from the two different measurement methods showed a poor reproducibility. These findings suggest that it might be best to evaluate patients' optical quality by OQAS using the best focus as chosen automatically by the instrument.展开更多
AIM:To evaluate the accuracy of spherical equivalent(SE) estimates of a double-pass system and to compare it with retinoscopy,subjective refraction and a table mounted autorefractor.METHODS:Non-cycloplegic refraction ...AIM:To evaluate the accuracy of spherical equivalent(SE) estimates of a double-pass system and to compare it with retinoscopy,subjective refraction and a table mounted autorefractor.METHODS:Non-cycloplegic refraction was performed on 125 eyes of 65 healthy adults(age 23.5±3.0 years) from October 2010 to January 2011 using retinoscopy,subjective refraction,autorefraction(Auto kerato refractometer TOPCON KR-8100,Japan) and a double pass system(Optical Quality Analysis System,OQAS,Visiometrics S.L.,Spain).Nine consecutive measurements with the double-pass system were performed on a subgroup of 22 eyes to assess repeatability.To evaluate the trueness of the OQAS instrument,the SE laboratory bias between the double pass system and the other techniques was calculated.RESULTS:The SE mean coefficient of repeatability obtained was 0.22D.Significant correlations could be established between the OQAS and the SE obtained with retinoscopy(r=0.956,P【0.001),subjective refraction(r=0.955,P【0.001) and autorefraction(r=0.957,P【0.001).The differences in SE between the double-pass system and the other techniques were significant(P【0.001),but lacked clinical relevance except for retinoscopy;Retinoscopy gave more hyperopic values than the double-pass system-0.51±0.50D as well as the subjective refraction-0.23±0.50D;More myopic values were achieved by means of autorefraction 0.24±0.49D. CONCLUSION:The double-pass system provides accurate and reliable estimates of the SE that can be used for clinical studies.This technique can determine the correct focus position to assess the ocular optical quality.However,it has a relatively small measuring range in comparison with autorefractors(-8.00 to +5.00D),and requires prior information on the refractive state of the patient.展开更多
Background The evaluation of retinal image quality in cataract eyes has gained importance and the clinical modulation transfer functions （MTF） can obtained by aberrometer and double pass （DP） system. This study ai...Background The evaluation of retinal image quality in cataract eyes has gained importance and the clinical modulation transfer functions （MTF） can obtained by aberrometer and double pass （DP） system. This study aimed to compare MTF derived from a ray tracing aberrometer and a DP system in early cataractous and normal eyes. Methods There were 128 subjects with 61 control eyes and 67 eyes with early cataract defined according to the Lens Opacities Classification System II1. A laser ray-tracing wavefront aberrometer （iTrace） and a double pass （DP） system （OQAS） assessed ocular MTF for 6.0 mm pupil diameters following dilation. Areas under the MTF （AUMTF） and their correlations were analyzed. Stepwise multiple regression analysis assessed factors affecting the differences between iTrace- and OQAS-derived AUMTF for the early cataract group. Results For both early cataract and control groups, iTrace-derived MTFs were higher than OQAS-derived MTFs across a range of spatial frequencies （P 〈0.01）. No significant difference between the two groups occurred for iTrace-derived AUMTF, but the early cataract group had significantly smaller OQAS-derived AUMTF than did the control group （P 〈0.01）. AUMTF determined from both the techniques demonstrated significant correlations with nuclear opacities, higher-order aberrations （HOAs）, visual acuity, and contrast sensitivity functions, while the OQAS-derived AUMTF also demonstrated significant correlations with age and cortical opacity grade. The factors significantly affecting the difference between iTrace and OQAS AUMTF were root-mean-squared HOAs （standardized beta coefficient=-0.63, P 〈0.01） and age （standardized beta coefficient=0.26, P 〈0.01）. Conclusions MTFs determined from a iTrace and a DP system （OQAS） differ significantly in early cataractous and normal subjects. Correlations with visual performance were higher for the DP system. OQAS-derived MTF may be useful as an indicator of visual performance in early cataract eyes.展开更多
For high reliability and long life systems, system pass/fail data are often rare. Integrating lower-level data, such as data drawn from the subsystem or component pass/fail testing,the Bayesian analysis can improve th...For high reliability and long life systems, system pass/fail data are often rare. Integrating lower-level data, such as data drawn from the subsystem or component pass/fail testing,the Bayesian analysis can improve the precision of the system reliability assessment. If the multi-level pass/fail data are overlapping,one challenging problem for the Bayesian analysis is to develop a likelihood function. Since the computation burden of the existing methods makes them infeasible for multi-component systems, this paper proposes an improved Bayesian approach for the system reliability assessment in light of overlapping data. This approach includes three steps： fristly searching for feasible paths based on the binary decision diagram, then screening feasible points based on space partition and constraint decomposition, and finally simplifying the likelihood function. An example of a satellite rolling control system demonstrates the feasibility and the efficiency of the proposed approach.展开更多
This paper investigates the fundamental data detection problem with burst interference in massive multiple-input multiple-output orthogonal frequency division multiplexing(MIMO-OFDM) systems. In particular, burst inte...This paper investigates the fundamental data detection problem with burst interference in massive multiple-input multiple-output orthogonal frequency division multiplexing(MIMO-OFDM) systems. In particular, burst interference may occur only on data symbols but not on pilot symbols, which means that interference information cannot be premeasured. To cancel the burst interference, we first revisit the uplink multi-user system and develop a matrixform system model, where the covariance pattern and the low-rank property of the interference matrix is discussed. Then, we propose a turbo message passing based burst interference cancellation(TMP-BIC) algorithm to solve the data detection problem, where the constellation information of target data is fully exploited to refine its estimate. Furthermore, in the TMP-BIC algorithm, we design one module to cope with the interference matrix by exploiting its lowrank property. Numerical results demonstrate that the proposed algorithm can effectively mitigate the adverse effects of burst interference and approach the interference-free bound.展开更多
The influence of positive bending system on plate crown control was researched. The approximation fullload distribution method for pass scheduling was put forward. This method can not only make full use of the mill ca...The influence of positive bending system on plate crown control was researched. The approximation fullload distribution method for pass scheduling was put forward. This method can not only make full use of the mill capacity with decreased pass number, but also give quality product of excellent flatness.展开更多
Relative navigation is a key feature in the joint tactical information distribution system（JTIDS）.A parametric message passing algorithm based on factor graph is proposed to perform relative navigation in JTIDS.Firs...Relative navigation is a key feature in the joint tactical information distribution system（JTIDS）.A parametric message passing algorithm based on factor graph is proposed to perform relative navigation in JTIDS.First of all,the joint posterior distribution of all the terminals＇ positions is represented by factor graph.Because of the nonlinearity between the positions and time-of-arrival（TOA） measurement,messages cannot be obtained in closed forms by directly using the sum-product algorithm on factor graph.To this end,the Euclidean norm is approximated by Taylor expansion.Then,all the messages on the factor graph can be derived in Gaussian forms,which enables the terminals to transmit means and covariances.Finally,the impact of major error sources on the navigation performance are evaluated by Monte Carlo simulations,e.g.,range measurement noise,priors of position uncertainty and velocity noise.Results show that the proposed algorithm outperforms the extended Kalman filter and cooperative extended Kalman filter in both static and mobile scenarios of the JTIDS.展开更多
Hybrid precoder design is a key technique providing better antenna gain and reduced hardware complexity in millimeter-wave(mmWave)massive multiple-input multiple-output(MIMO)systems.In this paper,Gaussian Mixture lear...Hybrid precoder design is a key technique providing better antenna gain and reduced hardware complexity in millimeter-wave(mmWave)massive multiple-input multiple-output(MIMO)systems.In this paper,Gaussian Mixture learned approximate message passing(GM-LAMP)network is presented for the design of optimal hybrid precoders suitable for mmWave Massive MIMO systems.Optimal hybrid precoder designs using a compressive sensing scheme such as orthogonal matching pursuit(OMP)and its derivatives results in high computational complexity when the dimensionality of the sparse signal is high.This drawback can be addressed using classical iterative algorithms such as approximate message passing(AMP),which has comparatively low computational complexity.The drawbacks of AMP algorithm are fixed shrinkage parameter and non-consideration of prior distribution of the hybrid precoders.In this paper,the fixed shrinkage parameter problem of the AMP algorithm is addressed using learned AMP(LAMP)network,and is further enhanced as GMLAMP network using the concept of Gaussian Mixture distribution of the hybrid precoders.The simula-tion results show that the proposed GM-LAMP network achieves optimal hybrid precoder design with enhanced achievable rates,better accuracy and low computational complexity compared to the existing algorithms.展开更多
According to the characteristics of PQF continuous rolling pass,the relationship between spread coefficient,wall thickness coefficient and elongation are analyzed.The section shape of tube in each stand outlet,the eff...According to the characteristics of PQF continuous rolling pass,the relationship between spread coefficient,wall thickness coefficient and elongation are analyzed.The section shape of tube in each stand outlet,the efficient working radius and the rotational speed of each roll are obtained,therefore,the pass parametric design is completed.A thermal-mechanical coupled model of continuous rolling tube' s forming process is established by the three-dimensional elasto-plastic finite element method,the section shape and area of tube in each stand outlet are forecasted,which is used to modify the pass.The rolling force of each roller is predict too,which provides a guidance for pass design.In addition,a visual software of PQF pass parametric design system on heavy calibre seamless tube is generated with Visual Basic.The forming dimension of tube and the rolling force of each roller are successfully obtained,by simulating the forming process of a certain series heavy calibre seamless tube.This system posses practical utilization value.By using this system,the development cycle of new product can be shortened,the reliability of pass design can be improved,and the energy consumption of rolling mill and production cost can be decreased.展开更多
We study non-equilibrium behaviors of a particle subjected to a high-frequency cutoff noise in terms of generalized Langevin equation, where the spectrum of internal noise is considered to be of the generalized Debye ...We study non-equilibrium behaviors of a particle subjected to a high-frequency cutoff noise in terms of generalized Langevin equation, where the spectrum of internal noise is considered to be of the generalized Debye form. A closed solution is impossible even if the equation is linear, because the Laplace transform of the memory kernel is a multi-value function. We use a numerical method to calculate the velocity correlation function of a force-free particle and the probability of a particle passing over the top of an inverse harmonic potential. We indicate the nonergodicity of the second type, i.e., the auto-correlation function of the velocity approaches to non-stationary at large times. Applied to the barrier passage problem, we find and analyse a resonant phenomenon that the dependence of the cutoff frequency is nonmonotonic when the initial directional velocity of the particle is less than the critical value, the latter is determined by the passing probability equal to 0.5.展开更多
This paper presents a planar microstrip wideband dual mode Band-Pass Filter(BPF) from 2 GHz to 3.4 GHz with a notched band at 2.62 GHz.The dual mode band-pass filter consists of a ring resonator with two quarter-wavel...This paper presents a planar microstrip wideband dual mode Band-Pass Filter(BPF) from 2 GHz to 3.4 GHz with a notched band at 2.62 GHz.The dual mode band-pass filter consists of a ring resonator with two quarter-wavelength open-circuited stubs at =90o and =0o,respectively.A square perturbation stub has been put at the corner of the ring resonator to increase the narrow stopbands and improve the performance of selectivity.By using a parallel-coupled feed line,a narrow notched band is introduced at the required frequency and its Fractional BandWidth(FBW) is about 5%.The proposed filter has a narrow notched band and a wide pass-band with a sharp cutoff frequency characteristic,the attenuation rate for the sharp cutoff frequency responses is 297.17 dB/GHz(cal-culated from 1.959 GHz with-34.43 dB to 2.065 GHz with-2.93 dB) and 228.10 dB/GHz(calculated from 3.395 GHz with-2.873 dB to 3.507 GHz with-28.42 dB).This filter has the advantages of good insertion loss in both operating bands and two rejections of greater than 16 dB in the range of 1.59 GHz to 1.99 GHz and 3.49 GHz to 3.98 GHz.Having been presented in this article,the measurement results agree well with the simulation results,which validates our idea.展开更多
The ground application system of the FY-3 meteorological satellite,a new generation of polar-orbiting meteorological satellite designed and built independently by China has passed professional acceptance check in Beij...The ground application system of the FY-3 meteorological satellite,a new generation of polar-orbiting meteorological satellite designed and built independently by China has passed professional acceptance check in Beijing recently.The experts agreed unanimously that the ground application system of FY-3 meteorological satellite realized the timely acquisition of global data from morning and afternoon展开更多
Developed by the Academy of Aerospace Liquid Propulsion Technology (AALPT), the propulsion system for the new-generation light-lift liquid launch vehicle passed its first ground test firing on November 27, 2012 at the...Developed by the Academy of Aerospace Liquid Propulsion Technology (AALPT), the propulsion system for the new-generation light-lift liquid launch vehicle passed its first ground test firing on November 27, 2012 at the Beijing Institute of Aerospace Testing Technology. The event signifies that this is the only domestic static test-firing facility for rocket propulsion systems that can meet the development requirements for new-generation launch vehicles,展开更多
The former Vice-President of the International Council of Ophthalmology(ICO).Professor of Ophthalmology Emeritus Johns Hopkins University School of Medicine,Wilmer Eye Institute,USA.The first Director of the Departmen...The former Vice-President of the International Council of Ophthalmology(ICO).Professor of Ophthalmology Emeritus Johns Hopkins University School of Medicine,Wilmer Eye Institute,USA.The first Director of the Department of Ophthalmology and Visual Sciences,The Chinese University of Hong Kong China.The first Director of the Peking University Eye Center,China.展开更多
High-speed maglev trains(HSMTs)can run at high running speeds due to their unique design.The pressure waves that these trains generate while passing each other are therefore very intense,and can even have safety impli...High-speed maglev trains(HSMTs)can run at high running speeds due to their unique design.The pressure waves that these trains generate while passing each other are therefore very intense,and can even have safety implications.In order to reduce the transient impact of such waves,the standard k-ε turbulence model is used in this work to assess the effect of railway spacing on the aerodynamic loads,pressure and surrounding flow field of 600 km/h maglev trains passing each other in open air.The sliding mesh technique is used to determine the relative motion between the considered trains.The results show that the surface pressure is approximately linearly correlated with the square of the speed while the amplitude of the pressure wave on the train surface,side force,and rolling moment all have negative exponential relationships with the railway spacing.展开更多
In this paper,an index modulation(IM)aided uplink orthogonal time frequency space modulation(OTFS)structure for sparse code multiple access(SCMA)is proposed.To be more specific,the information bits are firstly partiti...In this paper,an index modulation(IM)aided uplink orthogonal time frequency space modulation(OTFS)structure for sparse code multiple access(SCMA)is proposed.To be more specific,the information bits are firstly partitioned for transmit antenna(TA)selection and sparse codeword mapping,respectively.Subsequently,the codewords deployed on the 2-dimensional(2D)delay-Doppler(DD)plane are transmitted by the selected TA,and the superimposed signals are jointly detected at the receiver.Furthermore,a low-complexity zero-embedded expectation propagation(ZE-EP)detector is conceived,where the codebooks are extended with zero vectors to reflect the silent indices.The simulation results demonstrate that the proposed IM-OTFS-SCMA system is capable of providing significant performance gain over the OTFS-SCMA counterpart.展开更多
In this paper,the multi cross-rolling and cryogenic treatment were adopted to process the AZ31 Mg alloy to study the influence of passes and cryogenic treatment on cross-rolled AZ31 Mg alloy.The tensile properties and...In this paper,the multi cross-rolling and cryogenic treatment were adopted to process the AZ31 Mg alloy to study the influence of passes and cryogenic treatment on cross-rolled AZ31 Mg alloy.The tensile properties and hardness were tested.The microstructure was characterized using electron backscatter diffraction(EBSD),transmission electron microscopy(TEM),and scanning electron microscopy(SEM)in order to elucidate the influencing mechanism.The results indicate that the treatment method can significantly improve the mechanical properties of AZ31 Mg alloy.The 3-pass sample processed by cryogenic treatment shows the highest strength(351 MPa)and has the highest hardness(76.1HV)and best hardness uniformity(standard deviation=0.9HV).The 2-pass sample has the highest ductility among all the samples but poor hardness evenness.The strengthening mechanism of 3-pass sample can be attributed to the fine grains,bimodal structure,high dislocation density,and precipitation strengthening.Due to repeated heat preservation of 4-pass and 5-pass,their comprehensive performances decrease.展开更多
文摘AIMTo evaluate intra-session repeatability and reproducibility of optical quality parameters measured at objective and subjective best focuses in a double-pass system.METHODSThirty Chinese healthy adults (19 to 40 years old) meeting our inclusion criterion were enrolled in the study. After a basic eye examination, two methods of optical quality measurement, based on subjective and objective best focuses were performed using the Optical Quality Analysis System (OQAS) with an artificial pupil diameter of 4.0 mm.RESULTSWith each method, three consecutive measurements of the following parameters: the modulation transfer function cutoff frequency (MTF<sub>cutoff</sub>), the Strehl<sup>2D</sup> ratio, the OQAS values (OVs) at contrasts of 100%, 20%, 9% and the objective scatter index (OSI) were performed by an experienced examiner. The repeatability of each method was evaluated by the repeatability limit (RL) and the coefficient of repeatability (COR). Reproducibility of the two methods was evaluated by intra-class correlation coefficient (ICC) and the 95% limits of agreement (Bland and Altman analysis). Thirty subjects, seven females and twenty three males, of whom 15 right eyes and 15 left eyes were selected randomly for recruitment in the study. The RLs (percentage) for the six parameters measured at objective focus and subjective focus ranged from 8.44% to 15.13% and 10.85% to 16.26%, respectively. The CORs for the two measurement methods ranged from 8.27% to 14.83% and 10.63% to 15.93%, respectively. With regard to reproducibility, the ICCs for the six parameters of OQAS ranged from 0.024 to 0.276. The 95% limits of agreement obtained for the six parameters (in comparison of the two methods) ranged from -0.57 to 42.18 (MTF<sub>cutoff</sub>), -0.01 to 0.23 (Strehl<sup>2D</sup> ratio), -0.02 to 1.40 (OV<sub>100%</sub>), -0.10 to 1.75 (OV<sub>20%</sub>), -0.14 to 1.80 (OV<sub>9%</sub>) and -1.46 to 0.18 (OSI).CONCLUSIONMeasurements provided by OQAS with either method showed a good repeatability. However, the results obtained from the two different measurement methods showed a poor reproducibility. These findings suggest that it might be best to evaluate patients' optical quality by OQAS using the best focus as chosen automatically by the instrument.
基金Spanish Ministry of Education and Science(No.DPI2008-06455-C02-01)European Union and the Spanish Agency for International Cooperation(AECI)(No.D/030286/10)
文摘AIM:To evaluate the accuracy of spherical equivalent(SE) estimates of a double-pass system and to compare it with retinoscopy,subjective refraction and a table mounted autorefractor.METHODS:Non-cycloplegic refraction was performed on 125 eyes of 65 healthy adults(age 23.5±3.0 years) from October 2010 to January 2011 using retinoscopy,subjective refraction,autorefraction(Auto kerato refractometer TOPCON KR-8100,Japan) and a double pass system(Optical Quality Analysis System,OQAS,Visiometrics S.L.,Spain).Nine consecutive measurements with the double-pass system were performed on a subgroup of 22 eyes to assess repeatability.To evaluate the trueness of the OQAS instrument,the SE laboratory bias between the double pass system and the other techniques was calculated.RESULTS:The SE mean coefficient of repeatability obtained was 0.22D.Significant correlations could be established between the OQAS and the SE obtained with retinoscopy(r=0.956,P【0.001),subjective refraction(r=0.955,P【0.001) and autorefraction(r=0.957,P【0.001).The differences in SE between the double-pass system and the other techniques were significant(P【0.001),but lacked clinical relevance except for retinoscopy;Retinoscopy gave more hyperopic values than the double-pass system-0.51±0.50D as well as the subjective refraction-0.23±0.50D;More myopic values were achieved by means of autorefraction 0.24±0.49D. CONCLUSION:The double-pass system provides accurate and reliable estimates of the SE that can be used for clinical studies.This technique can determine the correct focus position to assess the ocular optical quality.However,it has a relatively small measuring range in comparison with autorefractors(-8.00 to +5.00D),and requires prior information on the refractive state of the patient.
文摘Background The evaluation of retinal image quality in cataract eyes has gained importance and the clinical modulation transfer functions （MTF） can obtained by aberrometer and double pass （DP） system. This study aimed to compare MTF derived from a ray tracing aberrometer and a DP system in early cataractous and normal eyes. Methods There were 128 subjects with 61 control eyes and 67 eyes with early cataract defined according to the Lens Opacities Classification System II1. A laser ray-tracing wavefront aberrometer （iTrace） and a double pass （DP） system （OQAS） assessed ocular MTF for 6.0 mm pupil diameters following dilation. Areas under the MTF （AUMTF） and their correlations were analyzed. Stepwise multiple regression analysis assessed factors affecting the differences between iTrace- and OQAS-derived AUMTF for the early cataract group. Results For both early cataract and control groups, iTrace-derived MTFs were higher than OQAS-derived MTFs across a range of spatial frequencies （P 〈0.01）. No significant difference between the two groups occurred for iTrace-derived AUMTF, but the early cataract group had significantly smaller OQAS-derived AUMTF than did the control group （P 〈0.01）. AUMTF determined from both the techniques demonstrated significant correlations with nuclear opacities, higher-order aberrations （HOAs）, visual acuity, and contrast sensitivity functions, while the OQAS-derived AUMTF also demonstrated significant correlations with age and cortical opacity grade. The factors significantly affecting the difference between iTrace and OQAS AUMTF were root-mean-squared HOAs （standardized beta coefficient=-0.63, P 〈0.01） and age （standardized beta coefficient=0.26, P 〈0.01）. Conclusions MTFs determined from a iTrace and a DP system （OQAS） differ significantly in early cataractous and normal subjects. Correlations with visual performance were higher for the DP system. OQAS-derived MTF may be useful as an indicator of visual performance in early cataract eyes.
基金supported by the National Natural Science Foundation of China(61304218)
文摘For high reliability and long life systems, system pass/fail data are often rare. Integrating lower-level data, such as data drawn from the subsystem or component pass/fail testing,the Bayesian analysis can improve the precision of the system reliability assessment. If the multi-level pass/fail data are overlapping,one challenging problem for the Bayesian analysis is to develop a likelihood function. Since the computation burden of the existing methods makes them infeasible for multi-component systems, this paper proposes an improved Bayesian approach for the system reliability assessment in light of overlapping data. This approach includes three steps： fristly searching for feasible paths based on the binary decision diagram, then screening feasible points based on space partition and constraint decomposition, and finally simplifying the likelihood function. An example of a satellite rolling control system demonstrates the feasibility and the efficiency of the proposed approach.
基金supported by the National Key Laboratory of Wireless Communications Foundation,China (IFN20230204)。
文摘This paper investigates the fundamental data detection problem with burst interference in massive multiple-input multiple-output orthogonal frequency division multiplexing(MIMO-OFDM) systems. In particular, burst interference may occur only on data symbols but not on pilot symbols, which means that interference information cannot be premeasured. To cancel the burst interference, we first revisit the uplink multi-user system and develop a matrixform system model, where the covariance pattern and the low-rank property of the interference matrix is discussed. Then, we propose a turbo message passing based burst interference cancellation(TMP-BIC) algorithm to solve the data detection problem, where the constellation information of target data is fully exploited to refine its estimate. Furthermore, in the TMP-BIC algorithm, we design one module to cope with the interference matrix by exploiting its lowrank property. Numerical results demonstrate that the proposed algorithm can effectively mitigate the adverse effects of burst interference and approach the interference-free bound.
文摘The influence of positive bending system on plate crown control was researched. The approximation fullload distribution method for pass scheduling was put forward. This method can not only make full use of the mill capacity with decreased pass number, but also give quality product of excellent flatness.
基金supported by the National Natural Science Foundation of China(6120118161471037+1 种基金61571041)the Foundation for the Author of National Excellent Doctoral Dissertation of China(201445)
文摘Relative navigation is a key feature in the joint tactical information distribution system（JTIDS）.A parametric message passing algorithm based on factor graph is proposed to perform relative navigation in JTIDS.First of all,the joint posterior distribution of all the terminals＇ positions is represented by factor graph.Because of the nonlinearity between the positions and time-of-arrival（TOA） measurement,messages cannot be obtained in closed forms by directly using the sum-product algorithm on factor graph.To this end,the Euclidean norm is approximated by Taylor expansion.Then,all the messages on the factor graph can be derived in Gaussian forms,which enables the terminals to transmit means and covariances.Finally,the impact of major error sources on the navigation performance are evaluated by Monte Carlo simulations,e.g.,range measurement noise,priors of position uncertainty and velocity noise.Results show that the proposed algorithm outperforms the extended Kalman filter and cooperative extended Kalman filter in both static and mobile scenarios of the JTIDS.
文摘Hybrid precoder design is a key technique providing better antenna gain and reduced hardware complexity in millimeter-wave(mmWave)massive multiple-input multiple-output(MIMO)systems.In this paper,Gaussian Mixture learned approximate message passing(GM-LAMP)network is presented for the design of optimal hybrid precoders suitable for mmWave Massive MIMO systems.Optimal hybrid precoder designs using a compressive sensing scheme such as orthogonal matching pursuit(OMP)and its derivatives results in high computational complexity when the dimensionality of the sparse signal is high.This drawback can be addressed using classical iterative algorithms such as approximate message passing(AMP),which has comparatively low computational complexity.The drawbacks of AMP algorithm are fixed shrinkage parameter and non-consideration of prior distribution of the hybrid precoders.In this paper,the fixed shrinkage parameter problem of the AMP algorithm is addressed using learned AMP(LAMP)network,and is further enhanced as GMLAMP network using the concept of Gaussian Mixture distribution of the hybrid precoders.The simula-tion results show that the proposed GM-LAMP network achieves optimal hybrid precoder design with enhanced achievable rates,better accuracy and low computational complexity compared to the existing algorithms.
文摘According to the characteristics of PQF continuous rolling pass,the relationship between spread coefficient,wall thickness coefficient and elongation are analyzed.The section shape of tube in each stand outlet,the efficient working radius and the rotational speed of each roll are obtained,therefore,the pass parametric design is completed.A thermal-mechanical coupled model of continuous rolling tube' s forming process is established by the three-dimensional elasto-plastic finite element method,the section shape and area of tube in each stand outlet are forecasted,which is used to modify the pass.The rolling force of each roller is predict too,which provides a guidance for pass design.In addition,a visual software of PQF pass parametric design system on heavy calibre seamless tube is generated with Visual Basic.The forming dimension of tube and the rolling force of each roller are successfully obtained,by simulating the forming process of a certain series heavy calibre seamless tube.This system posses practical utilization value.By using this system,the development cycle of new product can be shortened,the reliability of pass design can be improved,and the energy consumption of rolling mill and production cost can be decreased.
文摘We study non-equilibrium behaviors of a particle subjected to a high-frequency cutoff noise in terms of generalized Langevin equation, where the spectrum of internal noise is considered to be of the generalized Debye form. A closed solution is impossible even if the equation is linear, because the Laplace transform of the memory kernel is a multi-value function. We use a numerical method to calculate the velocity correlation function of a force-free particle and the probability of a particle passing over the top of an inverse harmonic potential. We indicate the nonergodicity of the second type, i.e., the auto-correlation function of the velocity approaches to non-stationary at large times. Applied to the barrier passage problem, we find and analyse a resonant phenomenon that the dependence of the cutoff frequency is nonmonotonic when the initial directional velocity of the particle is less than the critical value, the latter is determined by the passing probability equal to 0.5.
基金Supported by the National Natural Science Foundation of China (No. 51007040)
文摘This paper presents a planar microstrip wideband dual mode Band-Pass Filter(BPF) from 2 GHz to 3.4 GHz with a notched band at 2.62 GHz.The dual mode band-pass filter consists of a ring resonator with two quarter-wavelength open-circuited stubs at =90o and =0o,respectively.A square perturbation stub has been put at the corner of the ring resonator to increase the narrow stopbands and improve the performance of selectivity.By using a parallel-coupled feed line,a narrow notched band is introduced at the required frequency and its Fractional BandWidth(FBW) is about 5%.The proposed filter has a narrow notched band and a wide pass-band with a sharp cutoff frequency characteristic,the attenuation rate for the sharp cutoff frequency responses is 297.17 dB/GHz(cal-culated from 1.959 GHz with-34.43 dB to 2.065 GHz with-2.93 dB) and 228.10 dB/GHz(calculated from 3.395 GHz with-2.873 dB to 3.507 GHz with-28.42 dB).This filter has the advantages of good insertion loss in both operating bands and two rejections of greater than 16 dB in the range of 1.59 GHz to 1.99 GHz and 3.49 GHz to 3.98 GHz.Having been presented in this article,the measurement results agree well with the simulation results,which validates our idea.
文摘The ground application system of the FY-3 meteorological satellite,a new generation of polar-orbiting meteorological satellite designed and built independently by China has passed professional acceptance check in Beijing recently.The experts agreed unanimously that the ground application system of FY-3 meteorological satellite realized the timely acquisition of global data from morning and afternoon
文摘Developed by the Academy of Aerospace Liquid Propulsion Technology (AALPT), the propulsion system for the new-generation light-lift liquid launch vehicle passed its first ground test firing on November 27, 2012 at the Beijing Institute of Aerospace Testing Technology. The event signifies that this is the only domestic static test-firing facility for rocket propulsion systems that can meet the development requirements for new-generation launch vehicles,
文摘The former Vice-President of the International Council of Ophthalmology(ICO).Professor of Ophthalmology Emeritus Johns Hopkins University School of Medicine,Wilmer Eye Institute,USA.The first Director of the Department of Ophthalmology and Visual Sciences,The Chinese University of Hong Kong China.The first Director of the Peking University Eye Center,China.
基金supported by the National Natural Science Foundation of China(12372049)Fundamental Research Funds for the Central Universities(2682023ZTPY036)Research and Development Project of JDD For HTS Maglev Transportation System(JDDKYCF2024002).
文摘High-speed maglev trains(HSMTs)can run at high running speeds due to their unique design.The pressure waves that these trains generate while passing each other are therefore very intense,and can even have safety implications.In order to reduce the transient impact of such waves,the standard k-ε turbulence model is used in this work to assess the effect of railway spacing on the aerodynamic loads,pressure and surrounding flow field of 600 km/h maglev trains passing each other in open air.The sliding mesh technique is used to determine the relative motion between the considered trains.The results show that the surface pressure is approximately linearly correlated with the square of the speed while the amplitude of the pressure wave on the train surface,side force,and rolling moment all have negative exponential relationships with the railway spacing.
基金supported in part by the National Key Research and Development Program of China with Grant number 2021YFB2900502。
文摘In this paper,an index modulation(IM)aided uplink orthogonal time frequency space modulation(OTFS)structure for sparse code multiple access(SCMA)is proposed.To be more specific,the information bits are firstly partitioned for transmit antenna(TA)selection and sparse codeword mapping,respectively.Subsequently,the codewords deployed on the 2-dimensional(2D)delay-Doppler(DD)plane are transmitted by the selected TA,and the superimposed signals are jointly detected at the receiver.Furthermore,a low-complexity zero-embedded expectation propagation(ZE-EP)detector is conceived,where the codebooks are extended with zero vectors to reflect the silent indices.The simulation results demonstrate that the proposed IM-OTFS-SCMA system is capable of providing significant performance gain over the OTFS-SCMA counterpart.
基金Project(52174362)supported by the National Natural Science Foundation of ChinaProject(2023JJ10020)supported by the Natural Science Foundation of Hunan Province,China+3 种基金Project(2024RC7002)supported by the Science and Technology Innovation Program of Hunan Province,ChinaProject(2024CY2-GJHX-71)supported by the Shaanxi Provincial Key R&D ProgramProject supported by the Yancheng“Talent Plan of Yellow Sea Pearl”for Leading Talent Project,ChinaProject(2019GK1012)supported by the Hunan Innovative Province Construction Special Program,China。
文摘In this paper,the multi cross-rolling and cryogenic treatment were adopted to process the AZ31 Mg alloy to study the influence of passes and cryogenic treatment on cross-rolled AZ31 Mg alloy.The tensile properties and hardness were tested.The microstructure was characterized using electron backscatter diffraction(EBSD),transmission electron microscopy(TEM),and scanning electron microscopy(SEM)in order to elucidate the influencing mechanism.The results indicate that the treatment method can significantly improve the mechanical properties of AZ31 Mg alloy.The 3-pass sample processed by cryogenic treatment shows the highest strength(351 MPa)and has the highest hardness(76.1HV)and best hardness uniformity(standard deviation=0.9HV).The 2-pass sample has the highest ductility among all the samples but poor hardness evenness.The strengthening mechanism of 3-pass sample can be attributed to the fine grains,bimodal structure,high dislocation density,and precipitation strengthening.Due to repeated heat preservation of 4-pass and 5-pass,their comprehensive performances decrease.
