A new Nylon 11（PA11）/polyethylene-octene（POE） blends compatibilized by maleic anhydride grafted mixture polyethyleneocten（POE-g-MAH） was prepared through melt blending method.The isothermal crystallization kinet...A new Nylon 11（PA11）/polyethylene-octene（POE） blends compatibilized by maleic anhydride grafted mixture polyethyleneocten（POE-g-MAH） was prepared through melt blending method.The isothermal crystallization kinetics and melting behaviors of PA11/POE blends were investigated in detail by differential scanning calorimetry（DSC） and polarized optical microscope.The n values of PA11 blending with POE or POE-g-MAH are almost similar with pure PA11,which indicates that the effect of POE and POE-g-MAH on nucleation and growth of PA11 crystal is slight.The overall crystallization rate of PA11/POE blends are higher than ones of pure PA11 at the same crystallization temperatures,but they decrease significantly when POE-g-MAH is added into PA11/POE blends.DSC heating curves of both PA11 and its blends exhibit two melting peaks,but the two melting peak become weaker when POE-g-MAH is add into PA11/POE blend systems.And the spherulite size is reduced significantly by the addition of POE-g-MAH compared with pure PA11 and PA11/POE blends.展开更多
The rheological behavior of composites made with low-density polyamide 11 (PA11) and high yield pulp fibre (HYP) is evaluated. The rheological properties of high-yield, pulp-reinforced bio- based Nylon 11 HYP/PA11 com...The rheological behavior of composites made with low-density polyamide 11 (PA11) and high yield pulp fibre (HYP) is evaluated. The rheological properties of high-yield, pulp-reinforced bio- based Nylon 11 HYP/PA11 composite were investigated using a capillary rheometer. The rheological tests were realized in function of the shear rate for different temperature conditions. The experimental results showed that identically for fibre content and aspect ratio, the shearing effects decreased as the temperature increased;that is, the HYP/PA11 became more non-Newtonian in the higher temperature region, which corresponds to the high pseudoplasticity of the HYP/PA11. At low HYP content, the shear viscosity is expected to increase rapidly with increasing concentrations of the fibres because of the rapidly increasing interactions between particles as they become more closely packed. However, at very high fibre content, random anisotropic structure of the fibres in polymer melts is created. The increase in shear viscosity is greater at lower shear rates, where fibre and polymer molecules are not completely oriented.展开更多
文摘A new Nylon 11（PA11）/polyethylene-octene（POE） blends compatibilized by maleic anhydride grafted mixture polyethyleneocten（POE-g-MAH） was prepared through melt blending method.The isothermal crystallization kinetics and melting behaviors of PA11/POE blends were investigated in detail by differential scanning calorimetry（DSC） and polarized optical microscope.The n values of PA11 blending with POE or POE-g-MAH are almost similar with pure PA11,which indicates that the effect of POE and POE-g-MAH on nucleation and growth of PA11 crystal is slight.The overall crystallization rate of PA11/POE blends are higher than ones of pure PA11 at the same crystallization temperatures,but they decrease significantly when POE-g-MAH is added into PA11/POE blends.DSC heating curves of both PA11 and its blends exhibit two melting peaks,but the two melting peak become weaker when POE-g-MAH is add into PA11/POE blend systems.And the spherulite size is reduced significantly by the addition of POE-g-MAH compared with pure PA11 and PA11/POE blends.
文摘The rheological behavior of composites made with low-density polyamide 11 (PA11) and high yield pulp fibre (HYP) is evaluated. The rheological properties of high-yield, pulp-reinforced bio- based Nylon 11 HYP/PA11 composite were investigated using a capillary rheometer. The rheological tests were realized in function of the shear rate for different temperature conditions. The experimental results showed that identically for fibre content and aspect ratio, the shearing effects decreased as the temperature increased;that is, the HYP/PA11 became more non-Newtonian in the higher temperature region, which corresponds to the high pseudoplasticity of the HYP/PA11. At low HYP content, the shear viscosity is expected to increase rapidly with increasing concentrations of the fibres because of the rapidly increasing interactions between particles as they become more closely packed. However, at very high fibre content, random anisotropic structure of the fibres in polymer melts is created. The increase in shear viscosity is greater at lower shear rates, where fibre and polymer molecules are not completely oriented.
