In order to reduce the maintenance cost of structured Peer-to-Peer (P2P),Clone Node Protocol (CNP) based on user behavior is proposed.CNP considers the regularity of user behavior and uses the method of clone node.A B...In order to reduce the maintenance cost of structured Peer-to-Peer (P2P),Clone Node Protocol (CNP) based on user behavior is proposed.CNP considers the regularity of user behavior and uses the method of clone node.A Bidirectional Clone Node Chord model (BCNChord) based on CNP protocol is designed and realized.In BCNChord,Anticlockwise Searching Algorithm,Difference Push Synchronize Algorithm and Optimal Maintenance Algorithm are put forward to increase the performances.In experiments,according to the frequency of nodes,the maintenance cost of BCNChord can be 3.5%～32.5% lower than that of Chord.In the network of 212 nodes,the logic path hop is steady at 6,which is much more prior to 12 of Chord and 10 of CNChord.Theoretical analysis and experimental results show that BCNChord can effectively reduce the maintenance cost of its structure and simultaneously improve the query efficiency up to (1/4)O(logN).BCNChord is more suitable for highly dynamic environment and higher real-time system.展开更多
Layered transition metal oxides have emerged as promising cathode materials for sodium ion batteries.However,irreversible phase transitions cause structural distortion and cation rearrangement,leading to sluggish Na+d...Layered transition metal oxides have emerged as promising cathode materials for sodium ion batteries.However,irreversible phase transitions cause structural distortion and cation rearrangement,leading to sluggish Na+dynamics and rapid capacity decay.In this study,we propose a medium-entropy cathode by simultaneously introducing Fe,Mg,and Li dopants into a typical P2-type Na_(0.75)Ni_(0.25)Mn_(0.75)O_(2)cathode.The modified Na_(0.75)Ni_(0.2125)Mn_(0.6375)Fe_(0.05)Mg_(0.05)Li_(0.05)O_(2)cathode predominantly exhibits a main P2 phase(93.5%)with a minor O3 phase(6.5%).Through spectroscopy techniques and electrochemical investigations,we elucidate the redox mechanisms of Ni^(2+/3+/4+),Mn^(3+/4+),Fe^(3+/4+),and O_(2)-/O_(2)^(n-)during charging/discharging.The medium-entropy doping mitigates the detrimental P2-O_(2)phase transition at high-voltage,replacing it with a moderate and reversible structural evolution(P2-OP4),thereby enhancing structural stability.Consequently,the modified cathode exhibits a remarkable rate capacity of 108.4 mAh·g^(-1)at 10C,with a capacity retention of 99.0%after 200 cycles at 1C,82.5%after 500 cycles at 5C,and 76.7%after 600 cycles at 10C.Furthermore,it also demonstrates superior electrochemical performance at high cutoff voltage of 4.5 V and extreme temperature(55 and 0℃).This work offers solutions to critical challenges in sodium ion batteries cathode materials.展开更多
Air-stable layered structured cathodes with high voltage and good cycling stability are highly desired for the practical application of Na-ion batteries.Herein,we report a P2-Na_(2/3)Ni_(2/3)Te_(1/3)O_(2) cathode that...Air-stable layered structured cathodes with high voltage and good cycling stability are highly desired for the practical application of Na-ion batteries.Herein,we report a P2-Na_(2/3)Ni_(2/3)Te_(1/3)O_(2) cathode that is stable in ambient air with an average operating voltage of~3.8 V,demonstrating excellent cycling stability with a capacity retention of more than 92.7%after 500 cycles at 20 mA g^(-1) and good rate capability with 91.9%capacity utilization at 500 mA g^(-1) with respect to capacity at 5 mA g^(-1) between 2.0 and 4.0 V.When the upper cutoff voltage is increased to 4.4 V,P2-Na_(2/3)Ni_(2/3)Te_(1/3)O_(2) delivers a reversible capacity of 71.9 mAh g^(-1) and retains 91.8%of the capacity after 100 cycles at 20 mA g^(-1).The charge compensation during charge/discharge is mainly due to the redox couple of Ni^(2+)/Ni^(3+)in the host with a small amount of contribution from oxygen.The stable structure of the material without phase transformation and with small volume change during charge-discharge allows it to give excellent cycle performance especially when the upper cutoff voltage is not higher than 4.2 V.展开更多
Na-ion cathode materials with a fast charge and discharge behavior are needed to develop future high energy sodium-ion batteries(SIBs).However,inevitably complicated phase transitions and sluggish kinet ics during ins...Na-ion cathode materials with a fast charge and discharge behavior are needed to develop future high energy sodium-ion batteries(SIBs).However,inevitably complicated phase transitions and sluggish kinet ics during insertion and removal of Na+in P_(2)-type layered transition metal oxides generate structura instability and severe capacity decay.To get rid of such a dilemma,we report a structural optimization strategy to promote P2-type layered transition metal oxides with more(010)active planes as an efficien cathode for SIBs.As a result,as-prepared hexagonal-prism P2-type layered Na_(0.71)Ni_(0.16)Li_(0.09)Co_(0.16)Mn0.6O_(2)cathode with more(010)active planes delivers a reversible capacity of 120.1 mAh/g at 0.1 C,impressive rate capability of 52.7 m Ah/g at 10 C,and long-term cycling stability(capacity retention of 95.6%ove200 cycles).The outstanding electrochemical performance benefited from the unique hexagonal-prism with more(010)active facets,which can effectively shorten the diffusion distances of Na+,increase the Na-ion migration dynamics and nanostructural stability during cycling verified by morphology character ization,Rietveld refinement,GITT,density functional theory calculations and operando XRD.展开更多
The widespread interest in layered P2-type Mn-based cathode materials for sodium-ion batteries(SIBs)stems from their cost-effectiveness and abundant resources.However,the inferior cycle stability and mediocre rate per...The widespread interest in layered P2-type Mn-based cathode materials for sodium-ion batteries(SIBs)stems from their cost-effectiveness and abundant resources.However,the inferior cycle stability and mediocre rate performance impede their further development in practical applications.Herein,we devised a wet chemical precipitation method to deposit an amorphous aluminum phosphate(AlPO_(4),denoted as AP)protective layer onto the surface of P2-type Na_(0.55)Ni_(0.1)Co_(0.7)Mn_(0.8)O_(2)(NCM@AP).The resulting NCM@5AP electrode,with a 5 wt%coating,exhibits extended cycle life(capacity retention of78.4%after 200 cycles at 100 mA g^(-1))and superior rate performance(98 mA h g^(-1)at 500 mA g^(-1))compared to pristine NCM.Moreover,our investigation provides comprehensive insights into the phase stability and active Na^(+)ion kinetics in the NCM@5AP composite electrode,shedding light on the underlying mechanisms responsible for the enhanced performance observed in the coated electrode.展开更多
Potassium-ions batteries(PIBs)are attracting increasing attention as up-and-coming youngster in largescale grid-level energy storage benefiting from its low-cost and high energy density.Nevertheless,enough researches ...Potassium-ions batteries(PIBs)are attracting increasing attention as up-and-coming youngster in largescale grid-level energy storage benefiting from its low-cost and high energy density.Nevertheless,enough researches regarding indispensable cathode materials for PIBs are badly absent.Herein,we synthesize K-deficient layered manganese-based oxides(P2-K_(0.21)MnO_(2) and P3-K_(0.23)MnO_(2))and investigate them as cathode of PIBs for the first time.As the newcomer of potassium-containing layered manganese-based oxides(K_(x)MnO_(2))group,P2-K_(0.21)MnO_(2) delivers high discharge capacity of 99.3 mAh g^(-1) and P3-K_(0.23)MnO_(2) exhibits remarkable capacity retention rate of 75.5%.Besides,in-situ XRD and ex-situ XRD measurements reveal the reversible phase transition of P2-K_(0.21)MnO_(2) and P3-K_(0.23)MnO_(2) with the potassium-ions extraction and reinsertion,respectively.This work contributes to a better understanding for the potassium storage in K-deficient layered K_(x)MnO_(2)(x≤0.23),possessing an important basic scientific significance for the exploitation and application of layered K_(x)MnO_(2) in PIBs.展开更多
P2-type layered Ni–Mn-based oxides are vital cathode materials for sodiumion batteries(SIBs)due to their high discharge capacity and working voltage.However,they suffer from the detrimental P2→O_(2) phase transition...P2-type layered Ni–Mn-based oxides are vital cathode materials for sodiumion batteries(SIBs)due to their high discharge capacity and working voltage.However,they suffer from the detrimental P2→O_(2) phase transition induced by the O^(2-)−O^(2-)−electrostatic repulsion upon high-voltage charge,which leads to rapid capacity fade.Herein,we construct a P2-type Ni–Mn-based layered oxide cathode with a core-shell structure(labeled as NM–Mg–CS).The P2-Na_(0.67)[Ni_(0.25)Mn_(0.75)]O_(2)(NM)core is enclosed by the robust P2-Na_(0.67)[Ni_(0.21)Mn_(0.71)Mg_(0.08)]O_(2)(NM–Mg)shell.The NM–Mg–CS exhibits the phase-transition-free character with mitigated volume change because the confinement effect of shell is conductive to inhibit the irreversible phase transition of the core material.As a result,it drives a high capacity retention of 81%after 1000 cycles at 5 C with an initial capacity of 78mA h/g.And the full cell with the NM–Mg–CS cathode and hard carbon anode delivers stable capacities over 250 cycles.The successful construction of the core-shell structure in P2-type layered oxides sheds light on the development of high-capacity and long-life cathode materials for SIBs.展开更多
基金supported by the National Natural Science Foundation of China under Grant No.61100205Science and Technology Project of Beijing Municipal Education Commission under Grant No.KM201110016006Doctor Start-up Foundation of BUCEA under Grant No.101002508
文摘In order to reduce the maintenance cost of structured Peer-to-Peer (P2P),Clone Node Protocol (CNP) based on user behavior is proposed.CNP considers the regularity of user behavior and uses the method of clone node.A Bidirectional Clone Node Chord model (BCNChord) based on CNP protocol is designed and realized.In BCNChord,Anticlockwise Searching Algorithm,Difference Push Synchronize Algorithm and Optimal Maintenance Algorithm are put forward to increase the performances.In experiments,according to the frequency of nodes,the maintenance cost of BCNChord can be 3.5%～32.5% lower than that of Chord.In the network of 212 nodes,the logic path hop is steady at 6,which is much more prior to 12 of Chord and 10 of CNChord.Theoretical analysis and experimental results show that BCNChord can effectively reduce the maintenance cost of its structure and simultaneously improve the query efficiency up to (1/4)O(logN).BCNChord is more suitable for highly dynamic environment and higher real-time system.
基金supported by the National Natural Science Foundation of China(No.21805018)by Sichuan Science and Technology Program(Nos.2022ZHCG0018,2023NSFSC0117 and 2023ZHCG0060)Yibin Science and Technology Program(No.2022JB005)and China Postdoctoral Science Foundation(No.2022M722704).
文摘Layered transition metal oxides have emerged as promising cathode materials for sodium ion batteries.However,irreversible phase transitions cause structural distortion and cation rearrangement,leading to sluggish Na+dynamics and rapid capacity decay.In this study,we propose a medium-entropy cathode by simultaneously introducing Fe,Mg,and Li dopants into a typical P2-type Na_(0.75)Ni_(0.25)Mn_(0.75)O_(2)cathode.The modified Na_(0.75)Ni_(0.2125)Mn_(0.6375)Fe_(0.05)Mg_(0.05)Li_(0.05)O_(2)cathode predominantly exhibits a main P2 phase(93.5%)with a minor O3 phase(6.5%).Through spectroscopy techniques and electrochemical investigations,we elucidate the redox mechanisms of Ni^(2+/3+/4+),Mn^(3+/4+),Fe^(3+/4+),and O_(2)-/O_(2)^(n-)during charging/discharging.The medium-entropy doping mitigates the detrimental P2-O_(2)phase transition at high-voltage,replacing it with a moderate and reversible structural evolution(P2-OP4),thereby enhancing structural stability.Consequently,the modified cathode exhibits a remarkable rate capacity of 108.4 mAh·g^(-1)at 10C,with a capacity retention of 99.0%after 200 cycles at 1C,82.5%after 500 cycles at 5C,and 76.7%after 600 cycles at 10C.Furthermore,it also demonstrates superior electrochemical performance at high cutoff voltage of 4.5 V and extreme temperature(55 and 0℃).This work offers solutions to critical challenges in sodium ion batteries cathode materials.
基金supported by National Natural Science Foundation of China(Grant No.52100084)Shenzhen Natural Science Fund(the Stable Support Plan Program GXWD20201230155427003-20200824094017001).
文摘Air-stable layered structured cathodes with high voltage and good cycling stability are highly desired for the practical application of Na-ion batteries.Herein,we report a P2-Na_(2/3)Ni_(2/3)Te_(1/3)O_(2) cathode that is stable in ambient air with an average operating voltage of~3.8 V,demonstrating excellent cycling stability with a capacity retention of more than 92.7%after 500 cycles at 20 mA g^(-1) and good rate capability with 91.9%capacity utilization at 500 mA g^(-1) with respect to capacity at 5 mA g^(-1) between 2.0 and 4.0 V.When the upper cutoff voltage is increased to 4.4 V,P2-Na_(2/3)Ni_(2/3)Te_(1/3)O_(2) delivers a reversible capacity of 71.9 mAh g^(-1) and retains 91.8%of the capacity after 100 cycles at 20 mA g^(-1).The charge compensation during charge/discharge is mainly due to the redox couple of Ni^(2+)/Ni^(3+)in the host with a small amount of contribution from oxygen.The stable structure of the material without phase transformation and with small volume change during charge-discharge allows it to give excellent cycle performance especially when the upper cutoff voltage is not higher than 4.2 V.
基金financially supported by the National Natural Science Foundation of China(Nos.52372188,51902090)Henan Key Research Project Plan for Higher Education Institutions(No.23A150038)+6 种基金2023 Introduction of Studying Abroad Talent Program“111”Project(No.D17007)Henan Provincial Key Scientific Research Project of Colleges and Universities(No23A150038)Key Scientific Research Project of Education Department of Henan Province(No.22A150042)the National Students’Platform for Innovation and Entrepreneurship Training Program(No.201910476010)the China Postdoctoral Science Foundation(No.2019 M652546)the Henan Province Postdoctoral StartUp Foundation(No.1901017)。
文摘Na-ion cathode materials with a fast charge and discharge behavior are needed to develop future high energy sodium-ion batteries(SIBs).However,inevitably complicated phase transitions and sluggish kinet ics during insertion and removal of Na+in P_(2)-type layered transition metal oxides generate structura instability and severe capacity decay.To get rid of such a dilemma,we report a structural optimization strategy to promote P2-type layered transition metal oxides with more(010)active planes as an efficien cathode for SIBs.As a result,as-prepared hexagonal-prism P2-type layered Na_(0.71)Ni_(0.16)Li_(0.09)Co_(0.16)Mn0.6O_(2)cathode with more(010)active planes delivers a reversible capacity of 120.1 mAh/g at 0.1 C,impressive rate capability of 52.7 m Ah/g at 10 C,and long-term cycling stability(capacity retention of 95.6%ove200 cycles).The outstanding electrochemical performance benefited from the unique hexagonal-prism with more(010)active facets,which can effectively shorten the diffusion distances of Na+,increase the Na-ion migration dynamics and nanostructural stability during cycling verified by morphology character ization,Rietveld refinement,GITT,density functional theory calculations and operando XRD.
基金financially supported by the Australian Research Council(ARC) through the Future Fellowship(FT180100705)the financial support from China Scholarship Council+3 种基金the support from UTS-HUST Key Technology Partner Seed Fundthe support from Open Project of State Key Laboratory of Advanced Special Steel,the Shanghai Key Laboratory of Advanced Ferrometallurgy,Shanghai University(SKLASS 2021-04)the Science and Technology Commission of Shanghai Municipality(22010500400)“Joint International Laboratory on Environmental and Energy Frontier Materials”and“Innovation Research Team of High–Level Local Universities in Shanghai”in Shanghai University。
文摘The widespread interest in layered P2-type Mn-based cathode materials for sodium-ion batteries(SIBs)stems from their cost-effectiveness and abundant resources.However,the inferior cycle stability and mediocre rate performance impede their further development in practical applications.Herein,we devised a wet chemical precipitation method to deposit an amorphous aluminum phosphate(AlPO_(4),denoted as AP)protective layer onto the surface of P2-type Na_(0.55)Ni_(0.1)Co_(0.7)Mn_(0.8)O_(2)(NCM@AP).The resulting NCM@5AP electrode,with a 5 wt%coating,exhibits extended cycle life(capacity retention of78.4%after 200 cycles at 100 mA g^(-1))and superior rate performance(98 mA h g^(-1)at 500 mA g^(-1))compared to pristine NCM.Moreover,our investigation provides comprehensive insights into the phase stability and active Na^(+)ion kinetics in the NCM@5AP composite electrode,shedding light on the underlying mechanisms responsible for the enhanced performance observed in the coated electrode.
基金support from the Key Project of Guangdong Province Nature Science Foundation (No. 2017B030311013)the Scientific and Technological Plan of Guangdong Province, Guangzhou and Qingyuan City, China (Nos. 2019B090905005, 2019B090911004, 2017B020227009, 2019DZX008, 2019A004)+2 种基金the financial support from the National Key R&D Program of China (2018YFB1502600)the National Natural Science Foundation of China (No. 51922042 and 51872098)the Sino-Singapore International Joint Research Institute (SSIJRI), Guangzhou 510700, China.
文摘Potassium-ions batteries(PIBs)are attracting increasing attention as up-and-coming youngster in largescale grid-level energy storage benefiting from its low-cost and high energy density.Nevertheless,enough researches regarding indispensable cathode materials for PIBs are badly absent.Herein,we synthesize K-deficient layered manganese-based oxides(P2-K_(0.21)MnO_(2) and P3-K_(0.23)MnO_(2))and investigate them as cathode of PIBs for the first time.As the newcomer of potassium-containing layered manganese-based oxides(K_(x)MnO_(2))group,P2-K_(0.21)MnO_(2) delivers high discharge capacity of 99.3 mAh g^(-1) and P3-K_(0.23)MnO_(2) exhibits remarkable capacity retention rate of 75.5%.Besides,in-situ XRD and ex-situ XRD measurements reveal the reversible phase transition of P2-K_(0.21)MnO_(2) and P3-K_(0.23)MnO_(2) with the potassium-ions extraction and reinsertion,respectively.This work contributes to a better understanding for the potassium storage in K-deficient layered K_(x)MnO_(2)(x≤0.23),possessing an important basic scientific significance for the exploitation and application of layered K_(x)MnO_(2) in PIBs.
基金supported by the National Natural Science Foundation of China(Nos.22121005 and 52072186)Open Foundation of Shanghai Jiao Tong University Shaoxing Research Institute of Renewable Energy and Molecular Engineering(No.JDSX2023003)+1 种基金the National Key Research and Development Program of China(Nos.2022YFB2402200 and 2019YFA0705600)the Fundamental Research Funds for the Central Universities of China(Nos.63233017,63231002,and 63231198).
文摘P2-type layered Ni–Mn-based oxides are vital cathode materials for sodiumion batteries(SIBs)due to their high discharge capacity and working voltage.However,they suffer from the detrimental P2→O_(2) phase transition induced by the O^(2-)−O^(2-)−electrostatic repulsion upon high-voltage charge,which leads to rapid capacity fade.Herein,we construct a P2-type Ni–Mn-based layered oxide cathode with a core-shell structure(labeled as NM–Mg–CS).The P2-Na_(0.67)[Ni_(0.25)Mn_(0.75)]O_(2)(NM)core is enclosed by the robust P2-Na_(0.67)[Ni_(0.21)Mn_(0.71)Mg_(0.08)]O_(2)(NM–Mg)shell.The NM–Mg–CS exhibits the phase-transition-free character with mitigated volume change because the confinement effect of shell is conductive to inhibit the irreversible phase transition of the core material.As a result,it drives a high capacity retention of 81%after 1000 cycles at 5 C with an initial capacity of 78mA h/g.And the full cell with the NM–Mg–CS cathode and hard carbon anode delivers stable capacities over 250 cycles.The successful construction of the core-shell structure in P2-type layered oxides sheds light on the development of high-capacity and long-life cathode materials for SIBs.
