Accurate detection and picking of the P-phase onset time in noisy microseismic data from underground mines remains a big challenge. Reliable P-phase onset time picking is necessary for accurate source location needed ...Accurate detection and picking of the P-phase onset time in noisy microseismic data from underground mines remains a big challenge. Reliable P-phase onset time picking is necessary for accurate source location needed for planning and rescue operations in the event of failures. In this paper, a new technique based on the discrete stationary wavelet transform （DSWT）and higher order statist!cs, is proposed for processing noisy data from underground mines. The objectives of this method are to （1） Improve manual detection and tPicking of P-phase onset; and （ii） provide an automatic means of detecting and picking P-phase onset me accurately. The DSWT is first used to filter the signal over several scales. The manual P-phase onset detection and picking are then obtained by computing the signal energy across selected scales with frequency bands that capture the signal of interest. The automatic P-phase onset, on the other hand, is achieved by using skewness- and kurtosis-based criterion applied to selected scales in a time-frequency domain. The method was tested using synthetic and field data from an underground limestone mine. Results were compared with results obtained by using the short-term to long-term average （STA/LTA） ratio and that by Reference Ge et al. （2009）. The results show that the me!hod provides a more reliable estimate of the P-phase onset arrival than the STA]LTA method when the signal to noise ratio is very low. Also, the results obtained from the field data matched accurately with the results from Reference Ge et al. （2009）.展开更多
针对铜吹炼Pierce-Smith转炉(Pierce-Smith Converter,P-S转炉)存在的高能耗及设备维护问题,采用VOF(Volume of Fluid)两相流与Realizable k-ε湍流耦合模型,对炉内气-液两相流行为与壁面剪切应力分布进行数值模拟,系统研究风口直径及...针对铜吹炼Pierce-Smith转炉(Pierce-Smith Converter,P-S转炉)存在的高能耗及设备维护问题,采用VOF(Volume of Fluid)两相流与Realizable k-ε湍流耦合模型,对炉内气-液两相流行为与壁面剪切应力分布进行数值模拟,系统研究风口直径及气体入口速度对熔池动力学的影响机制。研究表明:增大风口直径显著降低搅拌死区体积,扩展高湍动能区域覆盖范围,而提升气体入口速度可增强气泡上升区湍流强度。气体入口速度通过强化局部湍流促进熔池传质效率,风口直径变化可提升炉内混合均匀性。合理选择气体入口速度与风口直径可降低炉壁剪切应力峰值,抑制搅拌死区形成,为工业过程参数优化提供理论依据。展开更多
文摘Accurate detection and picking of the P-phase onset time in noisy microseismic data from underground mines remains a big challenge. Reliable P-phase onset time picking is necessary for accurate source location needed for planning and rescue operations in the event of failures. In this paper, a new technique based on the discrete stationary wavelet transform （DSWT）and higher order statist!cs, is proposed for processing noisy data from underground mines. The objectives of this method are to （1） Improve manual detection and tPicking of P-phase onset; and （ii） provide an automatic means of detecting and picking P-phase onset me accurately. The DSWT is first used to filter the signal over several scales. The manual P-phase onset detection and picking are then obtained by computing the signal energy across selected scales with frequency bands that capture the signal of interest. The automatic P-phase onset, on the other hand, is achieved by using skewness- and kurtosis-based criterion applied to selected scales in a time-frequency domain. The method was tested using synthetic and field data from an underground limestone mine. Results were compared with results obtained by using the short-term to long-term average （STA/LTA） ratio and that by Reference Ge et al. （2009）. The results show that the me!hod provides a more reliable estimate of the P-phase onset arrival than the STA]LTA method when the signal to noise ratio is very low. Also, the results obtained from the field data matched accurately with the results from Reference Ge et al. （2009）.
文摘针对铜吹炼Pierce-Smith转炉(Pierce-Smith Converter,P-S转炉)存在的高能耗及设备维护问题,采用VOF(Volume of Fluid)两相流与Realizable k-ε湍流耦合模型,对炉内气-液两相流行为与壁面剪切应力分布进行数值模拟,系统研究风口直径及气体入口速度对熔池动力学的影响机制。研究表明:增大风口直径显著降低搅拌死区体积,扩展高湍动能区域覆盖范围,而提升气体入口速度可增强气泡上升区湍流强度。气体入口速度通过强化局部湍流促进熔池传质效率,风口直径变化可提升炉内混合均匀性。合理选择气体入口速度与风口直径可降低炉壁剪切应力峰值,抑制搅拌死区形成,为工业过程参数优化提供理论依据。
