Background P-wave dispersion （PWD）, a measure of heterogeneity of atrial refractoriness, is defined as the difference between the maximum and minimum P-wave duration. In patients with severe aortic stenosis （AS）, ...Background P-wave dispersion （PWD）, a measure of heterogeneity of atrial refractoriness, is defined as the difference between the maximum and minimum P-wave duration. In patients with severe aortic stenosis （AS）, P-wave duration and PWD were shown to be increased, indicating atrial electrical remodeling. However, the effect of transcatheter aortic valve replacement （TAVR） on P-wave morphology has not been established yet. The aim of this study is to assess the short and long-term effects of TAVR with two types of bioprosthetic valves on P-wave duration and PWD in association with left atrial （LA） size. Methods Fifty-two （36 female） eligible patients in sinus rhythm who underwent transfemoral TAVR between June 01, 2012 and July 31, 2014 with either a Medtronic CoreValve （MCV） （n = 32） or an Edwards SAPIEN XT Valve （n = 20） were enrolled. Standard 12-lead electrocardiogram and echocardiographic evaluations were per- formed pre-procedurally, post-TAVR day one and 6 months post-TAVR. P-wave duration and PWD were measured and correlation analyses with echocardiographic variables were performed. Results P-wave duration and PWD were significantly decreased on post-TAVR day one （P 〈 0.05）. They continued to decrease during the six month follow-up period, but were not significantly different from short-term values （P 〉 0.05）. The decrease of LA diameter was found significant at the sixth-months of follow-up （P 〈 0.05）. These changes were independent from the types of bioprosthetic valves implanted （P 〉 0.05）. A positive correlation was detected between minimum P-wave duration and maximum aortic valve gradients at post-TAVR day one （r = 0.297, P = 0.032）. Conclusions P-wave duration and PWD were significantly reduced early after TAVR indicating early reverse atrial electrical remodeling. Moreover, structural reverse remodeling of atrium was detected at the 6-months of follow-up. The effects of two types of bioprosthetic valves on atrial remodeling were similar.展开更多
One-dimensional ensemble dispersion entropy(EDE1D)is an effective nonlinear dynamic analysis method for complexity measurement of time series.However,it is only restricted to assessing the complexity of one-di-mension...One-dimensional ensemble dispersion entropy(EDE1D)is an effective nonlinear dynamic analysis method for complexity measurement of time series.However,it is only restricted to assessing the complexity of one-di-mensional time series(TS1d)with the extracted complexity features only at a single scale.Aiming at these problems,a new nonlinear dynamic analysis method termed two-dimensional composite multi-scale ensemble Gramian dispersion entropy(CMEGDE_(2D))is proposed in this paper.First,the TS_(1D) is transformed into a two-dimensional image(I_(2D))by using Gramian angular fields(GAF)with more internal data structures and geometri features,which preserve the global characteristics and time dependence of vibration signals.Second,the I2D is analyzed at multiple scales through the composite coarse-graining method,which overcomes the limitation of a single scale and provides greater stability compared to traditional coarse-graining methods.Subsequently,a new fault diagnosis method of rolling bearing is proposed based on the proposed CMEGDE_(2D) for fault feature ex-traction and the chicken swarm algorithm optimized support vector machine(CsO-SvM)for fault pattern identification.The simulation signals and two data sets of rolling bearings are utilized to verify the effectiveness of the proposed fault diagnosis method.The results demonstrate that the proposed method has stronger dis-crimination ability,higher fault diagnosis accuracy and better stability than the other compared methods.展开更多
The relative dispersion of cloud and fog droplets has significant impacts on aerosol indirect effects,radiative transfer,and microphysical processes.However,previous studies have been mostly concerned with clouds,with...The relative dispersion of cloud and fog droplets has significant impacts on aerosol indirect effects,radiative transfer,and microphysical processes.However,previous studies have been mostly concerned with clouds,with limited studies on fog,particularly those that examine the combined influences of all key physical processes and their roles during fog evolution.As such,this study aims to conduct a comprehensive investigation by examining the relationships between relative dispersion and other microphysical variables,as well as the underlying microphysical and dynamic processes,based on field fog campaigns in polluted and clean conditions.In polluted fog,droplet concentrations are higher,leading to smaller droplets and increased dispersion.The correlation between dispersion and droplet volume-mean radius is positive in the polluted fog,but shifts to negative in clean fog.We attribute the difference to various microphysical processes like aerosol activation,condensation,collision-coalescence,and entrainment-mixing.In polluted fog,high aerosol concentrations,low supersaturations,and strong turbulence(entrainment-mixing)provide suitable conditions for the simultaneous occurrence of droplet condensation and aerosol activation,resulting in a positive correlation between dispersion and volume-mean radius,especially during the fog formation stage.In contrast,during the mature stage in clean fog,condensation is dominant with weak aerosol activation leading to a negative correlation between relative dispersion and volume-mean radius.The collision-coalescence process is more active in the mature stage,increasing radii and leading to the negative correlation between dispersion and volume-mean radius.This result sheds new light on understanding the relative dispersion and mechanisms in fog under different aerosol backgrounds.展开更多
Nanoparticle-reinforced Mg matrix composites(NPMMCs)capitalize on the synergistic properties of nanoparticles and Mg matrix,resulting in enhanced mechanical attributes compared to matrix.Nonetheless,effective high-tem...Nanoparticle-reinforced Mg matrix composites(NPMMCs)capitalize on the synergistic properties of nanoparticles and Mg matrix,resulting in enhanced mechanical attributes compared to matrix.Nonetheless,effective high-temperature dispersion of nanoparticles remains challenging.This study employs a molten salt dispersant(NaCl-KCl-MgCl_(2))effectively mitigating the oxidation and combustion of TiC nanoparticles(TiC_(np)).Compared with the atmosphere,the molten salt facilitates the pre-dispersion of TiC_(np)through thermal motion at elevated temperatures,thereby reducing agglomeration between the TiC_(np).Simultaneously,the molten salt effectively wets and disrupts the oxide layer on the surface of Mg melt,facilitating the wetting of TiC_(np)by the Mg melt.The successful incorporation of 3 vol.%TiC_(np)into the Mg matrix is achieved by utilizing molten salt,and the addition of TiC_(np)increases the viscosity of mg melt.Further dispersed by ultrasonic dispersion,the unique distribution of TiC_(np)within ring-like structures was obtained which was attributed to the increase of viscosity.As a configurational distribution,the ring-like TiC_(np)distribution morphology significantly enhances the mechanical properties of composites,as evidenced by an approximate 50%increase in compressive strength(UCS).展开更多
This letter addresses challenges in the clinical translation of BIBR1532,a promising telomerase inhibitor,for the treatment of esophageal squamous cell carcinoma(ESCC).BIBR1532 exerts its anti-cancer effect by activat...This letter addresses challenges in the clinical translation of BIBR1532,a promising telomerase inhibitor,for the treatment of esophageal squamous cell carcinoma(ESCC).BIBR1532 exerts its anti-cancer effect by activating DNA damage response(ATR/CHK1 and ATM/CHK2)pathways and downregulating telomere-binding proteins.Although its therapeutic potential is limited by poor aqueous solubility,solid dispersion(SD)technology may overcome this obstacle.Systematic analysis using PubChem-derived simplified molecular input line entry system identifiers and artificial intelligence-driven FormulationDT platform evaluation(oral formulation feasibility index:0.38)revealed that the SD technology,with superior scalability(32 approved products by 2021)and lower production risks,outperforms lipid-based formulations as an optimal dissolution strategy.Material analysis revealed hydroxypropyl methylcellulose(HPMC)as the optimal carrier with lower hygroscopicity,higher temperature and no intestinal targeting,thus enabling ESCC therapy.HPMC-based SD enhances BIBR1532 solubility and bioavailability for effective ESCC treatment.Future studies should focus on pilot tests for SD fabrication.展开更多
Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening pa...Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.展开更多
Background： Current evidence links atrial fibrillation （AF） to the inflammation. Inflammatory indexes such as high-sensitive C-reactive protein （hs-CRP） have been related to the development and persistence of AF....Background： Current evidence links atrial fibrillation （AF） to the inflammation. Inflammatory indexes such as high-sensitive C-reactive protein （hs-CRP） have been related to the development and persistence of AF. However, the role of inflammation in the atrial electrophysiological remodeling indexed by P-wave dispersion （Pa） remains unclear. Methods： The study consisted of 71 patients with lone paroxysmal AF （AF group） and 71 age- and gender-matched controls of paroxysmal supraventricular tachycardia without history of AF （control group）. Electrocardiography, P hs-CRP, and other clinical characteristics were compared between the two groups. Results： There was no significant difference between the two groups regarding age, gender, hyperlipidemia, etc. Compared to controls, left atrial diameter （44 ± 7 vs 39 ± 7 mm）, Pd （49 ± 13 vs 26 ± 8 ms）, and hs-CRP （2.17 [1.46-2.89] vs 1.12 [0.74-1.41] rag/L） were increased （P 〈 0.05）, respectively. Linear regression identified hs-CRP as an independent correlation ofPd level both in the total population and the AF group （r = 0.464 and 0.313; P 〈 0.001, respectively）. Multiple logistic regression revealed hs-C RP as an independent determinant of AF （odds ratio [OR] =l 5.430, 95% confidence interval： 6.031-39.476： P 〈0.001）. Further adjusted tbr Pd, both Pd and hs-CRP were independent predictors for AF, but the OR for hs-CRP in predicting AF has been attenuated from 15.430 to 6.246. Conclusions： In lone AF, P and plasma hs-CRP concentration are inter-associated and related to AF. The interaction between hs-CRP and AF may be mediated by Pe, suggesting an important role of inflammation in the atrial electrophysiological remodeling predisposing to AF.展开更多
Background P-wave dispersion （PWD） is a useful predictor of paroxysmal atrial fibrillation （AF）. The effect of cardiac resynchronization therapy （CRT） on PWD and the prognostic implications of the improvement in...Background P-wave dispersion （PWD） is a useful predictor of paroxysmal atrial fibrillation （AF）. The effect of cardiac resynchronization therapy （CRT） on PWD and the prognostic implications of the improvement in PWD remain undefined. The aim of the study was to explore the clinical significance of the improvement of PWD after CRT. Methods Electrocardiographic studies were performed before and three months after CRT in 81 patients （57 men and 24 women; age （60.5±11.2） years） with standard CRT indication but no history of AF. A significant improvement of PWD （PWD responder） was defined as a relative decrease 〉20% from baseline PWD. The primary endpoints were new-onset AF detected by electrocardiogram （ECG） or CRT. Results After （30.6±7.5） months of follow-up, PWD responders （n=43） had a significantly lower incidence of AF than did PWD nonresponders, 12% vs. 29% （P 〈0.001）. In Cox proportional hazard analysis, PWD responders was the only predictor of lower risk of new-onset AF （HR 0.33, 95% confidence interval 0.12-0.96, P=0.033）. Conclusion Improvement of P-wave dispersion after CRT was associated with a lower incidence of AF, which may be related to the significant improvement in left ventricular systolic function and the reverse modeling of the left atrium.展开更多
We experimentally studied the effect of crack aperture on P-wave velocity, amplitude, anisotropy and dispersion. Experimental models were constructed based on Hudson＇s theory. Six crack models were embedded with equa...We experimentally studied the effect of crack aperture on P-wave velocity, amplitude, anisotropy and dispersion. Experimental models were constructed based on Hudson＇s theory. Six crack models were embedded with equal-radius penny-shaped crack inclusions in each layer. The P-wave velocity and amplitude were measured parallel and perpendicular to the layers of cracks at frequencies of 0.1 MHz to 1 MHz. The experiments show that as the crack aperture increases from 0.l mm to 0.34 mm, the amplitude of the P-waves parallel to the crack layers decreases linearly with increasing frequency and the P-wave velocity dispersion varies from 1.5% to 2.1%, whereas the amplitude of the P-wave perpendicular to the crack layers decreases quadratically with increasing frequency and the velocity dispersion varies from 1.9% to 4.7%. The variation in the velocity dispersion parallel and perpendicular to the cracks intensifies the anisotropy dispersion of the P-waves in the crack models （6.7% to 83%）. The P-wave dispersion strongly depends on the scattering characteristics of the crack apertures.展开更多
Based on the measurement of the arrival time of maxima magnitude from band-pass filtering signals which were determined using a new Morlet wavelet multiple-filter method, we develop a method for measuring intrinsic an...Based on the measurement of the arrival time of maxima magnitude from band-pass filtering signals which were determined using a new Morlet wavelet multiple-filter method, we develop a method for measuring intrinsic and attenuative dispersion of the first cycle direct P-wave. We determine relative group delays of spectral components of direct P-waves for 984 ray paths from SML and ALS stations of the Taiwan Central Weather Bureau Seismic Network （CWBSN）. Using continuous relaxation model, we deduce a new transfer function that relates intrinsic dispersion to attenuation. Based on the genetic algorithm （GA）, we put forward a new inversion procedure for determining which is defined the flat part of quality factor Q（ω） spectrum, τ1 and τ2 parameters. The results indicate that ① The distribution of Om values versus epicentral distance and depth show that Qm values linearly increase with increasing of epicentral distance and depth, and Qm values is clearly independent of earthquakes magnitude; ② In the different depth ranges, Qm residual show no correlation with variations in epicentral distance. Some significant changes of Qm residual with time is likely caused by pre-seismic stress accumulation, and associated with fluid-filled higher density fractures rock volume in the source area of 1999 Chi-Chi Taiwan earthquake. We confirm that Qm residual with time anomaly appears about 2.5 years before the Chi-Chi earthquake; ③ A comparison of Qm residual for different depth range between SML and ALS stations show that the level of stress has vertical and lateral difference; ④ The area near observation station with both anomalously increasing and decreasing averaged Qm residual is likely an unstable environment for future strong earthquake occurrence. This study demonstrates the capability of direct P-waves dispersion for monitoring attenuation characteristics and its state changes of anelastic medium of the Earth at short propagation distance using seismograms recorded from very small events.展开更多
Sinkholes and cavities can represent serious hazards to human safety and urban infrastructures,cause roadbed subsidence,and so on.It is therefore essential to evaluate various sinkholes in different depths and sizes t...Sinkholes and cavities can represent serious hazards to human safety and urban infrastructures,cause roadbed subsidence,and so on.It is therefore essential to evaluate various sinkholes in different depths and sizes to assess the risk of collapse.This paper evaluates the effect of different cavities on Rayleigh-wave propagation and body(P)wave refraction.Rayleigh(R)wave propagation is analyzed according to the classical multi-channel analysis of surface waves(MASW)method also considering the R-wave backscattering.Synthetic seismic traces are computed by means of finite element modeling(FEM)for cavity and intrusion at different depths and sizes.Furthermore,field acquisition data is used to verify the detection effect of a cavity on R-and P-waves.The results show that the presence of backscattered R-waves and the changes in the R-wave velocity spectrum can help in cavity identification.Additional possible evidence is represented by significant changes in the refraction travel times over the cavity location.It can be concluded that the field data are in good agreement with the synthetic,and it could be effective to consider the results of both R-and P-wave analysis in order to efficiently identify the cavities.展开更多
Fine particulatematter(PM_(2.5))samples were collected in two neighboring cities,Beijing and Baoding,China.High-concentration events of PM_(2.5) in which the average mass concentration exceeded 75μg/m^(3) were freque...Fine particulatematter(PM_(2.5))samples were collected in two neighboring cities,Beijing and Baoding,China.High-concentration events of PM_(2.5) in which the average mass concentration exceeded 75μg/m^(3) were frequently observed during the heating season.Dispersion Normalized Positive Matrix Factorization was applied for the source apportionment of PM_(2.5) as minimize the dilution effects of meteorology and better reflect the source strengths in these two cities.Secondary nitrate had the highest contribution for Beijing(37.3%),and residential heating/biomass burning was the largest for Baoding(27.1%).Secondary nitrate,mobile,biomass burning,district heating,oil combustion,aged sea salt sources showed significant differences between the heating and non-heating seasons in Beijing for same period(2019.01.10–2019.08.22)(Mann-Whitney Rank Sum Test P<0.05).In case of Baoding,soil,residential heating/biomass burning,incinerator,coal combustion,oil combustion sources showed significant differences.The results of Pearson correlation analysis for the common sources between the two cities showed that long-range transported sources and some sources with seasonal patterns such as oil combustion and soil had high correlation coefficients.Conditional Bivariate Probability Function(CBPF)was used to identify the inflow directions for the sources,and joint-PSCF(Potential Source Contribution Function)was performed to determine the common potential source areas for sources affecting both cities.These models facilitated a more precise verification of city-specific influences on PM_(2.5) sources.The results of this study will aid in prioritizing air pollution mitigation strategies during the heating season and strengthening air quality management to reduce the impact of downwind neighboring cities.展开更多
Graphene and its derivatives are two-dimensional nanomaterials with exceptional physical and chemical properties.Research has shown that their addition can counter the inherent deficiencies of cementbased composites,i...Graphene and its derivatives are two-dimensional nanomaterials with exceptional physical and chemical properties.Research has shown that their addition can counter the inherent deficiencies of cementbased composites,including low tensile strength,poor toughness,and high susceptibility to cracking.However,because of its high specific surface area and the van der Waals force between layers,graphene is prone to agglomerate in the cement matrix which can make the properties worse.Hence,improving the graphene dispersion is essential.The surface structure and properties of graphene and its derivatives are first introduced,and the different methods for their dispersion in cement-based materials are reviewed.Their effects on the mechanical properties and durability of cement-based materials are then summarized.Based on these results,the microscopic and nanoscopic mechanisms of the way graphene and its derivatives affect cement-based materials are elaborated.Current problems and future trends in this research area are then considered.展开更多
For segmented detectors,surface flatness is critical as it directly influences both energy resolution and image clarity.Additionally,the limited adjustment range of the segmented detectors necessitates precise benchma...For segmented detectors,surface flatness is critical as it directly influences both energy resolution and image clarity.Additionally,the limited adjustment range of the segmented detectors necessitates precise benchmark construction.This paper proposes an architecture for detecting detector flatness based on channel spectral dispersion.By measuring the dispersion fringes for coplanar adjustment,the final adjustment residual is improved to better than 300 nm.This result validates the feasibility of the proposed technology and provides significant technical support for the development of next-generation large-aperture sky survey equipment.展开更多
The chemical composition of seawater affects the desulfurization of chalcopyrite in flotation.In this study,desulfurization experiments of chalcopyrite were conducted in both deionized(DI)water and seawater.The result...The chemical composition of seawater affects the desulfurization of chalcopyrite in flotation.In this study,desulfurization experiments of chalcopyrite were conducted in both deionized(DI)water and seawater.The results showed that,the copper grade of the concentrate obtained from seawater flotation decreased to 24.30%,compared to 24.60%in DI water.Concurrently,the recovery of chalcopyrite decreased from 51.39%to 38.67%,while the selectivity index(SI)also had a reduction from 2.006 to 1.798.The incorporation of ethylene diamine tetraacetic acid(EDTA),sodium silicate(SS),and sodium hexametaphosphate(SHMP)yielded an enhancement in the SI value,elevating it from 1.798 to 1.897,2.250 and 2.153,separately.It is particularly noteworthy that an excess of EDTA resulted in a SI value of merely 1.831.The mechanism of action was elucidated through analysis of surface charge measurements,X-ray photoelectron spectroscopy(XPS),Fourier transform infrared spectroscopy(FT-IR),extended Derjaguin-Landau Verwey-Overbeek(E-DLVO)theory,and density functional theory(DFT)calculations.展开更多
Reverse design of highly GeO2-doped silica optical fibers with broadband and flat dispersion profiles is proposed using a neural network(NN) combined with a particle swarm optimization(PSO) algorithm.Firstly,the NN mo...Reverse design of highly GeO2-doped silica optical fibers with broadband and flat dispersion profiles is proposed using a neural network(NN) combined with a particle swarm optimization(PSO) algorithm.Firstly,the NN model designed to predict optical fiber dispersion is trained with an appropriate choice of hyperparameters,achieving a root mean square error(RMSE) of 9.47×10-7on the test dataset,with a determination coefficient(R2) of 0.999.Secondly,the NN is combined with the PSO algorithm for the inverse design of dispersion-flattened optical fibers.To expand the search space and avoid particles becoming trapped in local optimal solutions,the PSO algorithm incorporates adaptive inertia weight updating and a simulated annealing algorithm.Finally,by using a suitable fitness function,the designed fibers exhibit flat group velocity dispersion(GVD) profiles at 1 400—2 400 nm,where the GVD fluctuations and minimum absolute GVD values are below 18 ps·nm-1·km-1and 7 ps·nm-1·km-1,respectively.展开更多
Dispersion characteristics of magnonic crystals have attracted considerable attention because of the potential applications for spin-wave devices.In this work,we investigated the strain-manipulated dispersion characte...Dispersion characteristics of magnonic crystals have attracted considerable attention because of the potential applications for spin-wave devices.In this work,we investigated the strain-manipulated dispersion characteristics of magnonic crystals with Dzyaloshinskii–Moriya interaction(DMI)and discussed the potential applications in spin-wave devices.Here,the ground states and stabilities of the magnonic crystals were investigated.Then,the strain-manipulated dispersion characteristics of the magnonic crystals based on domains and skyrmions were studied.The simulation results indicated that,the applied strain could manipulate the band widths and the positions of the allowed frequency bands.Finally,the realization of magnonic crystal heterojunctions and potential applications in spin-wave devices,such as filters,diodes,and transistors based on strain-manipulated magnonic crystals were proposed.Our research provides a theoretical foundation for designing tunable spin-wave devices based on strain-manipulated magnonic crystals with DMI.展开更多
The aim of this study was to enhance the applicability of genistein(GEN)and investigate genistein solid dispersion(GEN-SD).The optimal process parameters were determined as follows:anhydrous ethanol volume ratio of 4:...The aim of this study was to enhance the applicability of genistein(GEN)and investigate genistein solid dispersion(GEN-SD).The optimal process parameters were determined as follows:anhydrous ethanol volume ratio of 4:1,ultrasonication time of 30 min,rotary evaporation temperature of 50°C,and a drug-to-carrier mass ratio of 1:7.The results of the dissolution and solubility experiments showed that the dissolution rate and solubility of the optimized solid dispersion were significantly improved compared to pure GEN.Comprehensive characterization of the GEN-SD using X-ray diffraction,differential scanning calorimetry,scanning electron microscopy,and Fourier transform infrared spectroscopy clarified variations in crystalline form,thermal properties,and microscopic morphology.Antioxidant experiments showed that GEN-SD exhibited antioxidant activity and could effectively scavenge various free radicals.Stability studies demonstrated that GEN-SD was stable at a high temperature of 60℃and a light intensity of 4500 lx.展开更多
Nanomaterials are extensively utilized in a multitude of sectors,but their propensity to aggregate can considerably diminish the efficacy of functional materials.A pivotal challenge in this domain is achieving a homog...Nanomaterials are extensively utilized in a multitude of sectors,but their propensity to aggregate can considerably diminish the efficacy of functional materials.A pivotal challenge in this domain is achieving a homogenous distribution of nanomaterials,which is essential for enhancing their performance while also reducing production costs.In this work,we achieve uniform and stable dispersion of various nano-materials through the confinement effect generated by the stereocomplex cross-linked network formed by the combination of poly(L-lactic)acid and poly(D-lactic)acid.The unique confinement effect of poly-lactic acid(PLA)isomers is universal and significantly enhances the dispersion of nanomaterials in both PLA solutions and films.To demonstrate the efficacy of our approach,we disperse aggregation-induced emission(AIE)molecules within PLA,which leads to the production of PLA films exhibiting improved fluorescence property.This work provides an effective solution for the preparation of nanocomposite ma-terials that are both high-performing and cost-efficient.展开更多
Multiphase flow in porous rock is of great importance in the application of many industrial processes,including reservoir delineation,enhanced oil recovery,and CO_(2) sequestration.However,previous research typically ...Multiphase flow in porous rock is of great importance in the application of many industrial processes,including reservoir delineation,enhanced oil recovery,and CO_(2) sequestration.However,previous research typically investigated the dispersive behaviors when rock saturated with single or two-phase fluids and conducted limited studies on three-phase immiscible fluids.This study investigated the seismic dispersion,attenuation,and reflection features of seismic waves in three-phase immiscible fluidsaturated porous rocks.First,we proposed the calculation formulas of effective fluid modulus and effective fluid viscosity of multiphase immiscible fluids by taking into account the capillary pressure,reservoir wettability,and relative permeability simultaneously.Then,we analysed the frequencydependent behaviors of three-phase immiscible fluid-saturated porous rock under different fluid proportion cases using the Chapman multi-scale model.Next,the seismic responses are analysed using a four-layer model.The results indicate that the relative permeability,capillary pressure parameter,and fluid proportions are all significantly affect dispersion and attenuation.Comparative analyses demonstrate that dispersion and attenuation can be observed within the frequency range of seismic exploration for a lower capillary parameter a3 and higher oil content.Seismic responses reveal that the reflection features,such as travel time,seismic amplitude,and waveform of the bottom reflections of saturated rock and their underlying reflections are significantly dependent on fluid proportions and capillary parameters.For validation,the numerical results are further verified using the log data and real seismic data.This numerical analysis helps to further understand the wave propagation characteristics for a porous rock saturated with multiphase immiscible fluids.展开更多
文摘Background P-wave dispersion （PWD）, a measure of heterogeneity of atrial refractoriness, is defined as the difference between the maximum and minimum P-wave duration. In patients with severe aortic stenosis （AS）, P-wave duration and PWD were shown to be increased, indicating atrial electrical remodeling. However, the effect of transcatheter aortic valve replacement （TAVR） on P-wave morphology has not been established yet. The aim of this study is to assess the short and long-term effects of TAVR with two types of bioprosthetic valves on P-wave duration and PWD in association with left atrial （LA） size. Methods Fifty-two （36 female） eligible patients in sinus rhythm who underwent transfemoral TAVR between June 01, 2012 and July 31, 2014 with either a Medtronic CoreValve （MCV） （n = 32） or an Edwards SAPIEN XT Valve （n = 20） were enrolled. Standard 12-lead electrocardiogram and echocardiographic evaluations were per- formed pre-procedurally, post-TAVR day one and 6 months post-TAVR. P-wave duration and PWD were measured and correlation analyses with echocardiographic variables were performed. Results P-wave duration and PWD were significantly decreased on post-TAVR day one （P 〈 0.05）. They continued to decrease during the six month follow-up period, but were not significantly different from short-term values （P 〉 0.05）. The decrease of LA diameter was found significant at the sixth-months of follow-up （P 〈 0.05）. These changes were independent from the types of bioprosthetic valves implanted （P 〉 0.05）. A positive correlation was detected between minimum P-wave duration and maximum aortic valve gradients at post-TAVR day one （r = 0.297, P = 0.032）. Conclusions P-wave duration and PWD were significantly reduced early after TAVR indicating early reverse atrial electrical remodeling. Moreover, structural reverse remodeling of atrium was detected at the 6-months of follow-up. The effects of two types of bioprosthetic valves on atrial remodeling were similar.
基金Supported by the National Natural Science Foundation of China(Grant No.51975004)the Outstanding Youth Fund of Universities in Anhui Province of China(Grant No.2022AH020032).
文摘One-dimensional ensemble dispersion entropy(EDE1D)is an effective nonlinear dynamic analysis method for complexity measurement of time series.However,it is only restricted to assessing the complexity of one-di-mensional time series(TS1d)with the extracted complexity features only at a single scale.Aiming at these problems,a new nonlinear dynamic analysis method termed two-dimensional composite multi-scale ensemble Gramian dispersion entropy(CMEGDE_(2D))is proposed in this paper.First,the TS_(1D) is transformed into a two-dimensional image(I_(2D))by using Gramian angular fields(GAF)with more internal data structures and geometri features,which preserve the global characteristics and time dependence of vibration signals.Second,the I2D is analyzed at multiple scales through the composite coarse-graining method,which overcomes the limitation of a single scale and provides greater stability compared to traditional coarse-graining methods.Subsequently,a new fault diagnosis method of rolling bearing is proposed based on the proposed CMEGDE_(2D) for fault feature ex-traction and the chicken swarm algorithm optimized support vector machine(CsO-SvM)for fault pattern identification.The simulation signals and two data sets of rolling bearings are utilized to verify the effectiveness of the proposed fault diagnosis method.The results demonstrate that the proposed method has stronger dis-crimination ability,higher fault diagnosis accuracy and better stability than the other compared methods.
基金supported by the Chinese National Natural Science Foundation under Grant Nos.(41975181,42325503,42375197,42575207,42205090)Y.LIU is supported by the U.S.Department of Energy’s Atmospheric System Research(ASR)program.
文摘The relative dispersion of cloud and fog droplets has significant impacts on aerosol indirect effects,radiative transfer,and microphysical processes.However,previous studies have been mostly concerned with clouds,with limited studies on fog,particularly those that examine the combined influences of all key physical processes and their roles during fog evolution.As such,this study aims to conduct a comprehensive investigation by examining the relationships between relative dispersion and other microphysical variables,as well as the underlying microphysical and dynamic processes,based on field fog campaigns in polluted and clean conditions.In polluted fog,droplet concentrations are higher,leading to smaller droplets and increased dispersion.The correlation between dispersion and droplet volume-mean radius is positive in the polluted fog,but shifts to negative in clean fog.We attribute the difference to various microphysical processes like aerosol activation,condensation,collision-coalescence,and entrainment-mixing.In polluted fog,high aerosol concentrations,low supersaturations,and strong turbulence(entrainment-mixing)provide suitable conditions for the simultaneous occurrence of droplet condensation and aerosol activation,resulting in a positive correlation between dispersion and volume-mean radius,especially during the fog formation stage.In contrast,during the mature stage in clean fog,condensation is dominant with weak aerosol activation leading to a negative correlation between relative dispersion and volume-mean radius.The collision-coalescence process is more active in the mature stage,increasing radii and leading to the negative correlation between dispersion and volume-mean radius.This result sheds new light on understanding the relative dispersion and mechanisms in fog under different aerosol backgrounds.
基金funded by the National Key Research&Development Program of China(grant no 2022YFB3705705)the National Natural Science Foundation of China(grant nos.52301142,52371107,52201115)+3 种基金the Heilongjiang Provincial Postdoctoral Science Foundation(grant no LBH-11Z22167)The Fundamental Research Funds for the Central Universities(grant no HIT.OCEF.2024035)The Science and Technology Innovation Program of Hunan Province(grant no 2022RC4012)The Shanxi Provincial Science and Technology Major Special Project plan of“Taking the lead in unveiling the list”[grant nos.202201050201012].
文摘Nanoparticle-reinforced Mg matrix composites(NPMMCs)capitalize on the synergistic properties of nanoparticles and Mg matrix,resulting in enhanced mechanical attributes compared to matrix.Nonetheless,effective high-temperature dispersion of nanoparticles remains challenging.This study employs a molten salt dispersant(NaCl-KCl-MgCl_(2))effectively mitigating the oxidation and combustion of TiC nanoparticles(TiC_(np)).Compared with the atmosphere,the molten salt facilitates the pre-dispersion of TiC_(np)through thermal motion at elevated temperatures,thereby reducing agglomeration between the TiC_(np).Simultaneously,the molten salt effectively wets and disrupts the oxide layer on the surface of Mg melt,facilitating the wetting of TiC_(np)by the Mg melt.The successful incorporation of 3 vol.%TiC_(np)into the Mg matrix is achieved by utilizing molten salt,and the addition of TiC_(np)increases the viscosity of mg melt.Further dispersed by ultrasonic dispersion,the unique distribution of TiC_(np)within ring-like structures was obtained which was attributed to the increase of viscosity.As a configurational distribution,the ring-like TiC_(np)distribution morphology significantly enhances the mechanical properties of composites,as evidenced by an approximate 50%increase in compressive strength(UCS).
基金Supported by“Continuation”Project of Excellent Doctors,Guangdong Basic and Applied Basic Research Foundation,No.2025A04J5082Guangdong Basic and Applied Basic Research Foundation,No.2024A1515011236.
文摘This letter addresses challenges in the clinical translation of BIBR1532,a promising telomerase inhibitor,for the treatment of esophageal squamous cell carcinoma(ESCC).BIBR1532 exerts its anti-cancer effect by activating DNA damage response(ATR/CHK1 and ATM/CHK2)pathways and downregulating telomere-binding proteins.Although its therapeutic potential is limited by poor aqueous solubility,solid dispersion(SD)technology may overcome this obstacle.Systematic analysis using PubChem-derived simplified molecular input line entry system identifiers and artificial intelligence-driven FormulationDT platform evaluation(oral formulation feasibility index:0.38)revealed that the SD technology,with superior scalability(32 approved products by 2021)and lower production risks,outperforms lipid-based formulations as an optimal dissolution strategy.Material analysis revealed hydroxypropyl methylcellulose(HPMC)as the optimal carrier with lower hygroscopicity,higher temperature and no intestinal targeting,thus enabling ESCC therapy.HPMC-based SD enhances BIBR1532 solubility and bioavailability for effective ESCC treatment.Future studies should focus on pilot tests for SD fabrication.
基金financial support of the National Natural Science Foundation of China(No.52371103)the Fundamental Research Funds for the Central Universities,China(No.2242023K40028)+1 种基金the Open Research Fund of Jiangsu Key Laboratory for Advanced Metallic Materials,China(No.AMM2023B01).financial support of the Research Fund of Shihezi Key Laboratory of AluminumBased Advanced Materials,China(No.2023PT02)financial support of Guangdong Province Science and Technology Major Project,China(No.2021B0301030005)。
文摘Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.
文摘Background： Current evidence links atrial fibrillation （AF） to the inflammation. Inflammatory indexes such as high-sensitive C-reactive protein （hs-CRP） have been related to the development and persistence of AF. However, the role of inflammation in the atrial electrophysiological remodeling indexed by P-wave dispersion （Pa） remains unclear. Methods： The study consisted of 71 patients with lone paroxysmal AF （AF group） and 71 age- and gender-matched controls of paroxysmal supraventricular tachycardia without history of AF （control group）. Electrocardiography, P hs-CRP, and other clinical characteristics were compared between the two groups. Results： There was no significant difference between the two groups regarding age, gender, hyperlipidemia, etc. Compared to controls, left atrial diameter （44 ± 7 vs 39 ± 7 mm）, Pd （49 ± 13 vs 26 ± 8 ms）, and hs-CRP （2.17 [1.46-2.89] vs 1.12 [0.74-1.41] rag/L） were increased （P 〈 0.05）, respectively. Linear regression identified hs-CRP as an independent correlation ofPd level both in the total population and the AF group （r = 0.464 and 0.313; P 〈 0.001, respectively）. Multiple logistic regression revealed hs-C RP as an independent determinant of AF （odds ratio [OR] =l 5.430, 95% confidence interval： 6.031-39.476： P 〈0.001）. Further adjusted tbr Pd, both Pd and hs-CRP were independent predictors for AF, but the OR for hs-CRP in predicting AF has been attenuated from 15.430 to 6.246. Conclusions： In lone AF, P and plasma hs-CRP concentration are inter-associated and related to AF. The interaction between hs-CRP and AF may be mediated by Pe, suggesting an important role of inflammation in the atrial electrophysiological remodeling predisposing to AF.
文摘Background P-wave dispersion （PWD） is a useful predictor of paroxysmal atrial fibrillation （AF）. The effect of cardiac resynchronization therapy （CRT） on PWD and the prognostic implications of the improvement in PWD remain undefined. The aim of the study was to explore the clinical significance of the improvement of PWD after CRT. Methods Electrocardiographic studies were performed before and three months after CRT in 81 patients （57 men and 24 women; age （60.5±11.2） years） with standard CRT indication but no history of AF. A significant improvement of PWD （PWD responder） was defined as a relative decrease 〉20% from baseline PWD. The primary endpoints were new-onset AF detected by electrocardiogram （ECG） or CRT. Results After （30.6±7.5） months of follow-up, PWD responders （n=43） had a significantly lower incidence of AF than did PWD nonresponders, 12% vs. 29% （P 〈0.001）. In Cox proportional hazard analysis, PWD responders was the only predictor of lower risk of new-onset AF （HR 0.33, 95% confidence interval 0.12-0.96, P=0.033）. Conclusion Improvement of P-wave dispersion after CRT was associated with a lower incidence of AF, which may be related to the significant improvement in left ventricular systolic function and the reverse modeling of the left atrium.
基金supported by the Major National Project Program (No.2011ZX05007-006)
文摘We experimentally studied the effect of crack aperture on P-wave velocity, amplitude, anisotropy and dispersion. Experimental models were constructed based on Hudson＇s theory. Six crack models were embedded with equal-radius penny-shaped crack inclusions in each layer. The P-wave velocity and amplitude were measured parallel and perpendicular to the layers of cracks at frequencies of 0.1 MHz to 1 MHz. The experiments show that as the crack aperture increases from 0.l mm to 0.34 mm, the amplitude of the P-waves parallel to the crack layers decreases linearly with increasing frequency and the P-wave velocity dispersion varies from 1.5% to 2.1%, whereas the amplitude of the P-wave perpendicular to the crack layers decreases quadratically with increasing frequency and the velocity dispersion varies from 1.9% to 4.7%. The variation in the velocity dispersion parallel and perpendicular to the cracks intensifies the anisotropy dispersion of the P-waves in the crack models （6.7% to 83%）. The P-wave dispersion strongly depends on the scattering characteristics of the crack apertures.
基金supported by the National Science Council of Taiwan granted NSC-94-2816-M-194-004
文摘Based on the measurement of the arrival time of maxima magnitude from band-pass filtering signals which were determined using a new Morlet wavelet multiple-filter method, we develop a method for measuring intrinsic and attenuative dispersion of the first cycle direct P-wave. We determine relative group delays of spectral components of direct P-waves for 984 ray paths from SML and ALS stations of the Taiwan Central Weather Bureau Seismic Network （CWBSN）. Using continuous relaxation model, we deduce a new transfer function that relates intrinsic dispersion to attenuation. Based on the genetic algorithm （GA）, we put forward a new inversion procedure for determining which is defined the flat part of quality factor Q（ω） spectrum, τ1 and τ2 parameters. The results indicate that ① The distribution of Om values versus epicentral distance and depth show that Qm values linearly increase with increasing of epicentral distance and depth, and Qm values is clearly independent of earthquakes magnitude; ② In the different depth ranges, Qm residual show no correlation with variations in epicentral distance. Some significant changes of Qm residual with time is likely caused by pre-seismic stress accumulation, and associated with fluid-filled higher density fractures rock volume in the source area of 1999 Chi-Chi Taiwan earthquake. We confirm that Qm residual with time anomaly appears about 2.5 years before the Chi-Chi earthquake; ③ A comparison of Qm residual for different depth range between SML and ALS stations show that the level of stress has vertical and lateral difference; ④ The area near observation station with both anomalously increasing and decreasing averaged Qm residual is likely an unstable environment for future strong earthquake occurrence. This study demonstrates the capability of direct P-waves dispersion for monitoring attenuation characteristics and its state changes of anelastic medium of the Earth at short propagation distance using seismograms recorded from very small events.
文摘Sinkholes and cavities can represent serious hazards to human safety and urban infrastructures,cause roadbed subsidence,and so on.It is therefore essential to evaluate various sinkholes in different depths and sizes to assess the risk of collapse.This paper evaluates the effect of different cavities on Rayleigh-wave propagation and body(P)wave refraction.Rayleigh(R)wave propagation is analyzed according to the classical multi-channel analysis of surface waves(MASW)method also considering the R-wave backscattering.Synthetic seismic traces are computed by means of finite element modeling(FEM)for cavity and intrusion at different depths and sizes.Furthermore,field acquisition data is used to verify the detection effect of a cavity on R-and P-waves.The results show that the presence of backscattered R-waves and the changes in the R-wave velocity spectrum can help in cavity identification.Additional possible evidence is represented by significant changes in the refraction travel times over the cavity location.It can be concluded that the field data are in good agreement with the synthetic,and it could be effective to consider the results of both R-and P-wave analysis in order to efficiently identify the cavities.
基金supported by the National Institute of Environmental Research(NIER)funded by the Ministry of Environment(No.NIER-2019-04-02-039)supported by Particulate Matter Management Specialized Graduate Program through the Korea Environmental Industry&Technology Institute(KEITI)funded by the Ministry of Environment(MOE).
文摘Fine particulatematter(PM_(2.5))samples were collected in two neighboring cities,Beijing and Baoding,China.High-concentration events of PM_(2.5) in which the average mass concentration exceeded 75μg/m^(3) were frequently observed during the heating season.Dispersion Normalized Positive Matrix Factorization was applied for the source apportionment of PM_(2.5) as minimize the dilution effects of meteorology and better reflect the source strengths in these two cities.Secondary nitrate had the highest contribution for Beijing(37.3%),and residential heating/biomass burning was the largest for Baoding(27.1%).Secondary nitrate,mobile,biomass burning,district heating,oil combustion,aged sea salt sources showed significant differences between the heating and non-heating seasons in Beijing for same period(2019.01.10–2019.08.22)(Mann-Whitney Rank Sum Test P<0.05).In case of Baoding,soil,residential heating/biomass burning,incinerator,coal combustion,oil combustion sources showed significant differences.The results of Pearson correlation analysis for the common sources between the two cities showed that long-range transported sources and some sources with seasonal patterns such as oil combustion and soil had high correlation coefficients.Conditional Bivariate Probability Function(CBPF)was used to identify the inflow directions for the sources,and joint-PSCF(Potential Source Contribution Function)was performed to determine the common potential source areas for sources affecting both cities.These models facilitated a more precise verification of city-specific influences on PM_(2.5) sources.The results of this study will aid in prioritizing air pollution mitigation strategies during the heating season and strengthening air quality management to reduce the impact of downwind neighboring cities.
文摘Graphene and its derivatives are two-dimensional nanomaterials with exceptional physical and chemical properties.Research has shown that their addition can counter the inherent deficiencies of cementbased composites,including low tensile strength,poor toughness,and high susceptibility to cracking.However,because of its high specific surface area and the van der Waals force between layers,graphene is prone to agglomerate in the cement matrix which can make the properties worse.Hence,improving the graphene dispersion is essential.The surface structure and properties of graphene and its derivatives are first introduced,and the different methods for their dispersion in cement-based materials are reviewed.Their effects on the mechanical properties and durability of cement-based materials are then summarized.Based on these results,the microscopic and nanoscopic mechanisms of the way graphene and its derivatives affect cement-based materials are elaborated.Current problems and future trends in this research area are then considered.
文摘For segmented detectors,surface flatness is critical as it directly influences both energy resolution and image clarity.Additionally,the limited adjustment range of the segmented detectors necessitates precise benchmark construction.This paper proposes an architecture for detecting detector flatness based on channel spectral dispersion.By measuring the dispersion fringes for coplanar adjustment,the final adjustment residual is improved to better than 300 nm.This result validates the feasibility of the proposed technology and provides significant technical support for the development of next-generation large-aperture sky survey equipment.
基金Project(52174239)supported by the National Natural Science Foundation of ChinaProject(2021YFC2902400)supported by the National Key R&D Program of China。
文摘The chemical composition of seawater affects the desulfurization of chalcopyrite in flotation.In this study,desulfurization experiments of chalcopyrite were conducted in both deionized(DI)water and seawater.The results showed that,the copper grade of the concentrate obtained from seawater flotation decreased to 24.30%,compared to 24.60%in DI water.Concurrently,the recovery of chalcopyrite decreased from 51.39%to 38.67%,while the selectivity index(SI)also had a reduction from 2.006 to 1.798.The incorporation of ethylene diamine tetraacetic acid(EDTA),sodium silicate(SS),and sodium hexametaphosphate(SHMP)yielded an enhancement in the SI value,elevating it from 1.798 to 1.897,2.250 and 2.153,separately.It is particularly noteworthy that an excess of EDTA resulted in a SI value of merely 1.831.The mechanism of action was elucidated through analysis of surface charge measurements,X-ray photoelectron spectroscopy(XPS),Fourier transform infrared spectroscopy(FT-IR),extended Derjaguin-Landau Verwey-Overbeek(E-DLVO)theory,and density functional theory(DFT)calculations.
基金supported by the Fundamental Research Funds for the Central Universities (No.2024JBZY021)the National Natural Science Foundation of China (No.61575018)。
文摘Reverse design of highly GeO2-doped silica optical fibers with broadband and flat dispersion profiles is proposed using a neural network(NN) combined with a particle swarm optimization(PSO) algorithm.Firstly,the NN model designed to predict optical fiber dispersion is trained with an appropriate choice of hyperparameters,achieving a root mean square error(RMSE) of 9.47×10-7on the test dataset,with a determination coefficient(R2) of 0.999.Secondly,the NN is combined with the PSO algorithm for the inverse design of dispersion-flattened optical fibers.To expand the search space and avoid particles becoming trapped in local optimal solutions,the PSO algorithm incorporates adaptive inertia weight updating and a simulated annealing algorithm.Finally,by using a suitable fitness function,the designed fibers exhibit flat group velocity dispersion(GVD) profiles at 1 400—2 400 nm,where the GVD fluctuations and minimum absolute GVD values are below 18 ps·nm-1·km-1and 7 ps·nm-1·km-1,respectively.
文摘Dispersion characteristics of magnonic crystals have attracted considerable attention because of the potential applications for spin-wave devices.In this work,we investigated the strain-manipulated dispersion characteristics of magnonic crystals with Dzyaloshinskii–Moriya interaction(DMI)and discussed the potential applications in spin-wave devices.Here,the ground states and stabilities of the magnonic crystals were investigated.Then,the strain-manipulated dispersion characteristics of the magnonic crystals based on domains and skyrmions were studied.The simulation results indicated that,the applied strain could manipulate the band widths and the positions of the allowed frequency bands.Finally,the realization of magnonic crystal heterojunctions and potential applications in spin-wave devices,such as filters,diodes,and transistors based on strain-manipulated magnonic crystals were proposed.Our research provides a theoretical foundation for designing tunable spin-wave devices based on strain-manipulated magnonic crystals with DMI.
基金supported by department of Education of Liaoning Province(Natural Science,Strategic Industrialization Project)(LJ212410163061).
文摘The aim of this study was to enhance the applicability of genistein(GEN)and investigate genistein solid dispersion(GEN-SD).The optimal process parameters were determined as follows:anhydrous ethanol volume ratio of 4:1,ultrasonication time of 30 min,rotary evaporation temperature of 50°C,and a drug-to-carrier mass ratio of 1:7.The results of the dissolution and solubility experiments showed that the dissolution rate and solubility of the optimized solid dispersion were significantly improved compared to pure GEN.Comprehensive characterization of the GEN-SD using X-ray diffraction,differential scanning calorimetry,scanning electron microscopy,and Fourier transform infrared spectroscopy clarified variations in crystalline form,thermal properties,and microscopic morphology.Antioxidant experiments showed that GEN-SD exhibited antioxidant activity and could effectively scavenge various free radicals.Stability studies demonstrated that GEN-SD was stable at a high temperature of 60℃and a light intensity of 4500 lx.
基金supported by the National Key R&D Program of China(No.2022YFB3804204)the National Natural Science Foundation of China(Nos.52127805,52102090,12172005,and 12325202)+1 种基金the Fundamental Research Funds for the Central Uni-versities(No.2232022D-04)the Innovation and Development Sup-port Plan for Key Industries in Southern Xinjiang(No.2022DB011).
文摘Nanomaterials are extensively utilized in a multitude of sectors,but their propensity to aggregate can considerably diminish the efficacy of functional materials.A pivotal challenge in this domain is achieving a homogenous distribution of nanomaterials,which is essential for enhancing their performance while also reducing production costs.In this work,we achieve uniform and stable dispersion of various nano-materials through the confinement effect generated by the stereocomplex cross-linked network formed by the combination of poly(L-lactic)acid and poly(D-lactic)acid.The unique confinement effect of poly-lactic acid(PLA)isomers is universal and significantly enhances the dispersion of nanomaterials in both PLA solutions and films.To demonstrate the efficacy of our approach,we disperse aggregation-induced emission(AIE)molecules within PLA,which leads to the production of PLA films exhibiting improved fluorescence property.This work provides an effective solution for the preparation of nanocomposite ma-terials that are both high-performing and cost-efficient.
基金supported in part by the National Natural Science Foundation of China under Grant 41874143 and Grant 42374163in part by the Key Program of Natural Science Foundation of Sichuan Province of China under Grant 2023NSFSC0019in part by the Central Funds Guiding the Local Science and Technology Development under Grant 2024ZYD0124.
文摘Multiphase flow in porous rock is of great importance in the application of many industrial processes,including reservoir delineation,enhanced oil recovery,and CO_(2) sequestration.However,previous research typically investigated the dispersive behaviors when rock saturated with single or two-phase fluids and conducted limited studies on three-phase immiscible fluids.This study investigated the seismic dispersion,attenuation,and reflection features of seismic waves in three-phase immiscible fluidsaturated porous rocks.First,we proposed the calculation formulas of effective fluid modulus and effective fluid viscosity of multiphase immiscible fluids by taking into account the capillary pressure,reservoir wettability,and relative permeability simultaneously.Then,we analysed the frequencydependent behaviors of three-phase immiscible fluid-saturated porous rock under different fluid proportion cases using the Chapman multi-scale model.Next,the seismic responses are analysed using a four-layer model.The results indicate that the relative permeability,capillary pressure parameter,and fluid proportions are all significantly affect dispersion and attenuation.Comparative analyses demonstrate that dispersion and attenuation can be observed within the frequency range of seismic exploration for a lower capillary parameter a3 and higher oil content.Seismic responses reveal that the reflection features,such as travel time,seismic amplitude,and waveform of the bottom reflections of saturated rock and their underlying reflections are significantly dependent on fluid proportions and capillary parameters.For validation,the numerical results are further verified using the log data and real seismic data.This numerical analysis helps to further understand the wave propagation characteristics for a porous rock saturated with multiphase immiscible fluids.
