In the field of lithium-ion battery cathode materials, lithium-rich layered oxide materials have garnered significant attention due to their exceptional discharge specific capacity and high operating voltage. However,...In the field of lithium-ion battery cathode materials, lithium-rich layered oxide materials have garnered significant attention due to their exceptional discharge specific capacity and high operating voltage. However, their limitations in terms of cycling stability and rate capability remain major impediments to their wider application. In this study, an innovative approach was employed by simultaneously utilizing the acidic and oxidative properties of phosphomolybdic acid to generate a spinel structure and in-situ coating of a conductive polymer(polypyrrole) on the surface of lithium-rich layered oxide materials. This strategy aimed to mitigate structural degradation during charge-discharge cycles, enhance the ionic/electronic conductivity, and suppress side reactions. Experimental results demonstrated that after 200 cycles at a current density of 1 C, the modified sample exhibited a discharge specific capacity of 193.4 m Ah/g, with an improved capacity retention rate of 83.3% and a minimal voltage decay of only 0.27 V. These findings provide compelling support for the development and application of next-generation high-performance lithium-ion batteries.展开更多
The chromium oxide materials were prepared using Cr2O3 micropowder as main starting material, TiO2 micropowder as sintering aid, polyvinyl alcohol as binder, by a series of processes such as slurrying, spraying granul...The chromium oxide materials were prepared using Cr2O3 micropowder as main starting material, TiO2 micropowder as sintering aid, polyvinyl alcohol as binder, by a series of processes such as slurrying, spraying granulation, machine moulding and cold isostatic pressing, and firing at 1 500 ℃ for 3 h in air （ oxygen partial pressure was 2. 1× 10^4 Pa ）, industrial nitrogen （ oxygen partial pressure was 1×10^3 Pa ） , pure nitrogen （ oxygen partial pressure was 10 Pa） , high purity nitrogen （ oxygen partial pressure was 0.1 Pa ） , and carbon cake embedded atmosphere （ oxygen partial pressure wtas 2.3×10-12 Pa ）. Effects of oxygen partial pressures on the sintering behavior of Cr2 O3 materials were investiga- ted. The results show that （ 1 ） for 3 wt% TiO2-doped specimeas, there is a substantial dependence of sintering on oxygen partial pressure （0. 1 Pa - 2. 1 ×10^4 Pa ） , and the bulk density increases and apparent porosity decreases with oxygen partial pressure decreasing; （2） even if the oxygen partial pressure is 0. 1 Pa, the specimen without TiO2 cannot reach densification sintering; （3） under very low oxygen partial pressure of carbon embedded atmosphere, Cr2O3 materials containing TiO2 or not can attain denzification.展开更多
Layered oxide is a promising cathode material for sodium-ion batteries because of its high-capacity,high operating voltage,and simple synthesis.Cycling performance is an important criterion for evaluating the applicat...Layered oxide is a promising cathode material for sodium-ion batteries because of its high-capacity,high operating voltage,and simple synthesis.Cycling performance is an important criterion for evaluating the application prospects of batteries.However,facing challenges,including phase transitions,ambient stability,side reactions,and irreversible anionic oxygen activity,the cycling performance of layered oxide cathode materials still cannot meet the application requirements.Therefore,this review proposes several strategies to address these challenges.First,bulk doping is introduced from three aspects:cationic single doping,anionic single doping,and multi-ion doping.Second,homogeneous surface coating and concentration gradient modification are reviewed.In addition,methods such as mixed structure design,particle engineering,high-entropy material construction,and integrated modification are proposed.Finally,a summary and outlook provide a new horizon for developing and modifying layered oxide cathode materials.展开更多
A thermodynamic model has been built up for the interactions between molten Ti alloys and oxide molding materials in the way of decomposition and solution of molding materials, then the influences on the reaction free...A thermodynamic model has been built up for the interactions between molten Ti alloys and oxide molding materials in the way of decomposition and solution of molding materials, then the influences on the reaction free energy changes have been calculated and discussed.展开更多
Layered-type transition metal(TM)oxides are considered as one of the most promising cathodes for K-ion batteries because of the large theoretical gravimetric capacity by low molar mass.However,they suffer from severe ...Layered-type transition metal(TM)oxides are considered as one of the most promising cathodes for K-ion batteries because of the large theoretical gravimetric capacity by low molar mass.However,they suffer from severe structural change by de/intercalation and diffusion of K^(+)ions with large ionic size,which results in not only much lower reversible capacity than the theoretical capacity but also poor power capability.Thus,it is important to enhance the structural stability of the layered-type TM oxides for outstanding electrochemical behaviors under the K-ion battery system.Herein,it is investigated that the substitution of the appropriate Ti^(4+)contents enables a highly enlarged reversible capacity of P3-type KxCrO_(2) using combined studies of first-principles calculation and various experiments.Whereas the pristine P3-type KxCrO_(2) just exhibits the reversible capacity of∼120 mAh g^(−1) in the voltage range of 1.5-4.0 V(vs.K^(+)/K),the∼0.61 mol K^(+)corresponding to∼150 mAh g^(−1) can be reversible de/intercalated at the structure of P3-type K0.71[Cr_(0.75)Ti_(0.25)]O_(2) under the same conditions.Furthermore,even at the high current density of 788 mA g^(−1),the specific capacity of P3-type K0.71[Cr_(0.75)Ti_(0.25)]O_(2) is∼120 mAh g^(−1),which is∼81 times larger than that of the pristine P3-type KxCrO_(2).It is believed that this research can provide an effective strategy to improve the electrochemical performances of the cathode materials suffered by severe structural change that occurred during charge/discharge under not only K-ion battery system but also other rechargeable battery systems.展开更多
Spherical indium tin oxide （ITO） nanoparticles were synthesized by combustion method using citric acid as fuel and nitrates as oxidizer. The obtained ITO nanoparticles were characterized by TG-DSC, FT-IR, XRD, BET, ...Spherical indium tin oxide （ITO） nanoparticles were synthesized by combustion method using citric acid as fuel and nitrates as oxidizer. The obtained ITO nanoparticles were characterized by TG-DSC, FT-IR, XRD, BET, TEM, and SEM. The ITO nanoparticles grew steadily with the increase of heat treatment temperature, and the 700~C calcined particles had a crystallite size of 25.3 nm and a specific surface area of 26.1 m2.g i The avoidance of chlorine ions in the synthesis process decreases particle agglomeration and promotes powder densification. The 900~C sintered pellet had a density of 67.6% of theoretical density （TD） and increased steadily to 97.3% for the 1400℃ sintered ceramics, respectively.展开更多
The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative conti...The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative continuous modification strategy combining non-thermal plasma(NTP)etching with fluorocarbon passivation.Characterization and kinetic analysis revealed that reactive plasma species—including atomic hydrogen(H),electronically excited molecular hydrogen(H_(2)^(*)),vibrationally excited molecular hydrogen(H_(2)v),and hydrogen ions(H^(+))—dominate the reduction of B_(2)O_(3)through lowering the transition energy barrier and shifting the reaction spontaneity.Subsequent argon plasma fragmentation of C_(8)F_(18)generates fluorocarbon radicals that form conformal passivation coatings(thickness:7 nm)on purified boron surfaces.The modified boron particles exhibit 37.5℃lower exothermic peak temperature and 27.2%higher heat release(14.8 kJ/g vs.11.6 kJ/g)compared to untreated counterparts.Combustion diagnostics reveal 194%increase in maximum flame height(135.10 mm vs.46.03 mm)and 134%enhancement in flame propagation rate(4.44 cm/s vs.1.90 cm/s).This NTP-based surface engineering approach establishes a scalable pathway for developing highperformance boron-based energetic composites.展开更多
Understanding the crystal phase evolution of bimetallic oxide anodes is the main concern to profoundly reveal the conversion reaction kinetics and sodium-ion storage mechanisms.Herein,an integrated selfsupporting anod...Understanding the crystal phase evolution of bimetallic oxide anodes is the main concern to profoundly reveal the conversion reaction kinetics and sodium-ion storage mechanisms.Herein,an integrated selfsupporting anode of the Cu-decorated Cu-Mn bimetallic oxides with oxygen vacancies(Ov-BMO-Cu)are in-situ generated by phase separation and hydrogen etching using nanoporous Cu-Mn alloy as selfsacrificial templates.On this basis,we have elucidated the relationship between the phase evolution,oxygen vacancies and sodium-ion storage mechanisms,further demonstrating the evolution of oxygen vacancies and the inhibition effect of manganese oxides as an“anchor”on grain aggregation of copper oxides.The kinetic analyses confirm that the expanded lattice space and increased oxygen vacancies of cycled Ov-BMO-Cu synergistically guarantee effective sodium-ion diffusion and storage mechanisms.Therefore,the Ov-BMO-Cu electrode exhibits higher reversible capacities of 4.04 mA h cm^(-2)at 0.2 mA cm^(-2)after 100 cycles and 2.20 m A h cm^(-2)at 1.0 mA cm^(-2)after 500 cycles.Besides,the presodiated Ov-BMO-Cu anode delivers a considerable reversible capacity of 0.79 m A h cm^(-2)at 1.0 mA cm^(-2)after 60 cycles in full cells with Na_(3)V_(2)(PO_(4))_(3)cathode,confirming its outstanding practicality.Thus,this work is expected to provide enlightenment for designing high-capacity bimetallic oxide anodes.展开更多
Polyester(PET) was pre-activated by atmospheric air plasma and coated by various inorganic oxide nanoparticles(MOx) such as titanium dioxide(TiO2), zinc oxide(ZnO), and silicon oxide(SiO2), using poly(vinylidene fluor...Polyester(PET) was pre-activated by atmospheric air plasma and coated by various inorganic oxide nanoparticles(MOx) such as titanium dioxide(TiO2), zinc oxide(ZnO), and silicon oxide(SiO2), using poly(vinylidene fluoride)(PVDF) and chitosan(CT) as binders. The resulting PET-PVDF-MOx-CT composites were thermally compressed and then characterized by scanning electron microscopy, Fourier infrared spectroscopy, thermal gravimetric analysis, and flame retardancy(FR) ability tests. PET modifications resulted in more thermally stable and less harmful composites with weaker hazardous gas release. This was explained in terms of structure compaction that blocks pyrolysis gas emissions.CT incorporation was found to reduce the material susceptibility to oxidation. This judicious procedure also allowed improving flame retardancy ability, by lengthening the combustion delay and slowing the flame propagation. Chitosan also turned out to contribute to a possible synergy with the other polymers present in the synthesized materials. These results provide valuable data that allow understanding the FR phenomena and envisaging low-cost high FR materials from biodegradable raw materials.展开更多
Among various gas sensing materials, metal oxide semiconductors have shown great potential as resistive type sensors. The ordered porous structural metal oxide semiconductors with well-defined meso- or macro-pores che...Among various gas sensing materials, metal oxide semiconductors have shown great potential as resistive type sensors. The ordered porous structural metal oxide semiconductors with well-defined meso- or macro-pores chemically synthesized via soft-templating method and nanocasting strategy have high porosity, highly interconnected pore channels and high surface area with enormous active sites for interacting with gaseous molecules. These features enable them good performance in gas sensing, including high sensitivity, fast response and recovery, good selectivity. This review gives a comprehensive summary about the porous metal oxides with focus on the synthesis methods, structure related properties, as well as the modification strategies for gas sensing improved performances.展开更多
Herein, a facile strategy for the synthesis of sandwich pyrolyzed bacterial cellulose（PBC）/graphene oxide（GO） composite was reported simply by utilizing the large-scale regenerated biomass bacterial cellulose as p...Herein, a facile strategy for the synthesis of sandwich pyrolyzed bacterial cellulose（PBC）/graphene oxide（GO） composite was reported simply by utilizing the large-scale regenerated biomass bacterial cellulose as precursor. The unique and delicate structure where three-dimensional interconnected bacterial cellulose（BC） network embedded in two-dimensional GO skeleton could not only work as an effective barrier to retard polysulfide diffusion during the charge/discharge process to enhance the cyclic stability of the Li–S battery, but also offer a continuous electron transport pathway for the improved rate capability.As a result, by utilizing pure sulfur as cathodes, the Li–S batteries assembled with PBC/GO interlayer can still exhibit a capacity of nearly 600 mAh·g^-1 at 3C and only 0.055% capacity decay per cycle can be observed over 200 cycles. Additionally, the cost-efficient and environmentfriendly raw materials may enable the PBC/GO sandwich interlayer to be an advanced configuration for Li–S batteries.展开更多
Rare earth elements（REEs） are critical materials and provide significant values to national security,energy production, environmental protection and economic growth. The supply of REEs in U.S. solely relies on impor...Rare earth elements（REEs） are critical materials and provide significant values to national security,energy production, environmental protection and economic growth. The supply of REEs in U.S. solely relies on import as domestic production of REEs was ceased because of the environmental concerns during mining and lack of competitiveness. Nonetheless, unconventional REEs-containing resources,including produced water. acid mine drainage, and coal and coal byproducts（C＆CBs） contain significant amounts of REEs. However, the concentrations of REEs in these resources are several orders of magnitude lower than that of REEs ores. Thus, extraction of REEs from these materials is challenging. Here we report REEs extraction with environmentally friendly method that successfully concentrated REEs from312 ppm in fly ash to 99.4% in the final product. Especially, the five critically important REEs（Dy, Eu, Nd.Tb. and Y） account for up to ～63% of the total weight of all REEs in the final 99.4%-purity product. Coal fly ash is one of the major solid coal utilization byproducts, representing great potential resources for REEs extraction. Extraction of REEs from these unconventional resources could be the way to secure domestic supply of these critical materials.展开更多
According to first principle simulations, we theoretically predict a type of stable single-layer graphene oxide（C_2O）.Using density functional theory（DFT）, C_2O is found to be a direct gap semiconductor. In additi...According to first principle simulations, we theoretically predict a type of stable single-layer graphene oxide（C_2O）.Using density functional theory（DFT）, C_2O is found to be a direct gap semiconductor. In addition, we obtain the absorption spectra of the periodic structure of C_2O, which show optical anisotropy. To study the optical properties of C_2O nanostructures, time-dependent density functional theory（TDDFT） is used. The C_2O nanostructure has a strong absorption near 7 eV when the incident light polarizes along the armchair-edge. Besides, we find that the optical properties can be controlled by the edge configuration and the size of the C_2O nanostructure. With the elongation strain increasing, the range of light absorption becomes wider and there is a red shift of absorption spectrum.展开更多
Two different morphologies of ZnO（lotus-shaped, rod-shaped） and ZnO/PVDF composite materials were prepared. The morphologies of ZnO and composite materials were characterized by scanning electron microscopy（SEM） a...Two different morphologies of ZnO（lotus-shaped, rod-shaped） and ZnO/PVDF composite materials were prepared. The morphologies of ZnO and composite materials were characterized by scanning electron microscopy（SEM） and transmission electron microscopy（TEM）. Fourier transform infrared spectroscopy（FT-IR）, thermal gravimetry（TG）, and X-ray diffraction（XRD） were also used to characterize the chemical structures and phase composites of ZnO and ZnO/PVDF composite materials. Breakdown voltage, dielectric constant and dielectric loss of ZnO/PVDF composite materials were also tested. Microstructure analysis showed that ZnO nanoparticles dispersed uniformly in the matrix. And the dielectric constant expresses a significantly improvement while the dielectric loss and breakdown voltage expresses no significant change. Moreover, dielectric constant keeps an improvement tendency with increasing content of ZnO.展开更多
This review is composed of three main parts each of which is written by well-known top specialists that have been,in a way or other,also the main participants of the majority of the developments reported.Thus,after a ...This review is composed of three main parts each of which is written by well-known top specialists that have been,in a way or other,also the main participants of the majority of the developments reported.Thus,after a general part covering the grand lines and more in-depth views of more recent tannin,lignin,carbohydrate and soy bioadhesives,somemix of the other bio raw materials with soy protein and soy flour and some other differently sourced bioadhesives for wood,this review presents a more in-depth part on starch-based wood adhesives and a more indepth part covering plant protein-based adhesives.It must be kept in mind that the review is focused on completely or almost completely biosourced adhesives,the fashionable adhesives derived from mixes of biosourced materials with synthetic resins having been intentionally excluded.This choice was made as the latter constitute only an intermediate interval,possibly temporary if even for a somewhat long times,towards a final full bioeconomy of scale in this field.This review also focuses on more recent results,mainly obtained in the last 10–20 years,thus on adhesive formulations really innovative and sometimes even non-traditional.In all these fields there is still a lot of possibility of innovation for relevant formulation as this field is still in rapid growth.展开更多
An investigation into the corrosion behavior of pure Mo50Re and rare earth oxide-doped Mo50Re,produced by spark plasma sintering,was performed in Ringer's physiologic solution at a temperature of 37°C.Potenti...An investigation into the corrosion behavior of pure Mo50Re and rare earth oxide-doped Mo50Re,produced by spark plasma sintering,was performed in Ringer's physiologic solution at a temperature of 37°C.Potentiodynamic polarization testing indicated a reduction in corrosion current density from 3.1μA·cm^(^(-2))for the pure Mo50Re to 1.6μA·cm^(-2)for Y-doped,1.5μA·cm^(-2)for La-doped,and 2.1μA·cm^(-2)for Y-La co-doped variants.Furthermore,electrochemical impedance spectroscopy revealed that the charge transfer resistance for the rare earth-doped alloys was higher,with values reaching up to 2.4×10^(4)Ω·cm2for Y-doped,3.4×10^(4)Ω·cm2for La-doped,and 2.9×10^(4)Ω·cm2for Y-La co-doped materials,in contrast to the 1.7×10^(3)Ω·cm2resistance observed for the pure Mo50Re.The research highlights the significant enhancement in corrosion resistance conferred by the incorporation of rare earth elements,ascribed to their ability to refine the grain size and purify the grain boundaries.展开更多
Eu-doped ZnO nanosheets were synthesized successfully by means of the hydrothermal method. The X-ray diffraction（XRD） pattern shows that the sample is a single phase with the ZnO-like wurtzite structure. And the X-r...Eu-doped ZnO nanosheets were synthesized successfully by means of the hydrothermal method. The X-ray diffraction（XRD） pattern shows that the sample is a single phase with the ZnO-like wurtzite structure. And the X-ray photoelectron spectrum suggests that there are Eu3＋ ions in the matrix of the sample. Eu3＋-related red emissions resulted from energy transfer were observed for the nanosheets under UV laser excitation. The UV, green and yellow emissions were also seen in the photoluminescence spectra.展开更多
The continuous series of perovskite-related oxides with the general formula GdzSr（Al1-xFex）207 0 〈 x 〈 1 were prepared by conventional ceramic technology in air. The pro- cessing stages of Gd2Sr（Al1-xFex）207 0 ...The continuous series of perovskite-related oxides with the general formula GdzSr（Al1-xFex）207 0 〈 x 〈 1 were prepared by conventional ceramic technology in air. The pro- cessing stages of Gd2Sr（Al1-xFex）207 0 〈 x 〈 1 phases were investigated by means of X-ray powder diffraction （XRD） and scanning electron microscopy （SEM） with the element phase analysis. The three main stages of GdeSr（All_~Fex）aO7 for- marion are pointed out. The analysis of the mutual influence of intermediate compounds on the synthesis of the target solid solutions of complex composition, in particular for Gd2Sr（All-xFex）207 was carried out. It is determined that the closeness of the reactive mixture composition to the composition of individual compounds Gd2SrA1207 or GdaSrFeaO7 is of importance for the realization of a partic- ular way of GdESr（Al1-xFex）207 solid solutions formation. It is shown that at x ,= 0.2 the reversing in scheme of Gd2Sr（Al1-Fex）207 series formation is observed. The formation of the Gd2Sr（Al1-xFex）207 continuous series is indicated by the monotonic dependence of molar unit cell volume on the iron content x.展开更多
This work introduces the facile hydrothermal synthesis of double perovskite La2CuCoO6.X-ray diffraction pattern confirmed the formation of a monoclinic phase with P121/c1 symmetry.Transmission electron microscopy resu...This work introduces the facile hydrothermal synthesis of double perovskite La2CuCoO6.X-ray diffraction pattern confirmed the formation of a monoclinic phase with P121/c1 symmetry.Transmission electron microscopy results revealed that the self-assembled porous rods were composed of nanocrystallite aggregates.The estimated specific surface area of these mesoporous rods with an average pore diameter of 6 nm was^41 m^2·g^–1.The presence of ions with oxidation states of La^3+,Cu^2+,and Co^2+/Co^3+on the surface of the mesoporous La2CuCoO6 rods was confirmed by X-ray photoelectron spectroscopic analysis.Via cyclicvoltammetry and chronopotentiometry,the electrode fabricated from the mesoporous La2CuCoO6 rods were found to exhibit pseudocapacitive behavior with a specific capacitance of 259.4 F·g^–1 at a current density of 0.5 A·g^–1.An^89%retention in specific capacitance was achieved after 1000 charge/discharge cycles at a constant current density of4 A·g^–1.展开更多
For the first time, DySrA104 of K2NiF4-type structure was synthesized. The parameters of DySrA104 ele- mentary unit cell are determined as follows： a = 0.368 （4） nm, c = 1.229 （2） nm, V = 0.166 （4） nm3. The res...For the first time, DySrA104 of K2NiF4-type structure was synthesized. The parameters of DySrA104 ele- mentary unit cell are determined as follows： a = 0.368 （4） nm, c = 1.229 （2） nm, V = 0.166 （4） nm3. The research of the complex aluminates ZnSrA104 （Ln = Nd, Gd, Dy） solid-state process demonstrated the change of the formation mecha- nism among LnSrA104 （Ln = Nd, Gd, Dy） series from DySrA104 oxide. The performed analysis provided a possibility to realize why chemists couldn＇t get DySrA104 for a long period of time.展开更多
基金supported partially by projects of National Natural Science Foundation of China (Nos. 52272200, 51972110, 52102245, 52102203 and 52072121)State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources (Nos. LAPS21004, LAPS202114)+5 种基金Beijing Natural Science Foundation (Nos. 2222076, 2222077)Hebei Natural Science Foundation (No. E2022502022)Huaneng Group Headquarters Science and Technology Project (No. HNKJ20-H88)2022 Strategic Research Key Project of Science and Technology Commission of the Ministry of Education, China Postdoctoral Science Foundation (No. 2022M721129)the Fundamental Research Funds for the Central Universities (Nos. 2022MS030, 2021MS028, 2020MS023, 2020MS028)the NCEPU "Double First-Class" Program。
文摘In the field of lithium-ion battery cathode materials, lithium-rich layered oxide materials have garnered significant attention due to their exceptional discharge specific capacity and high operating voltage. However, their limitations in terms of cycling stability and rate capability remain major impediments to their wider application. In this study, an innovative approach was employed by simultaneously utilizing the acidic and oxidative properties of phosphomolybdic acid to generate a spinel structure and in-situ coating of a conductive polymer(polypyrrole) on the surface of lithium-rich layered oxide materials. This strategy aimed to mitigate structural degradation during charge-discharge cycles, enhance the ionic/electronic conductivity, and suppress side reactions. Experimental results demonstrated that after 200 cycles at a current density of 1 C, the modified sample exhibited a discharge specific capacity of 193.4 m Ah/g, with an improved capacity retention rate of 83.3% and a minimal voltage decay of only 0.27 V. These findings provide compelling support for the development and application of next-generation high-performance lithium-ion batteries.
文摘The chromium oxide materials were prepared using Cr2O3 micropowder as main starting material, TiO2 micropowder as sintering aid, polyvinyl alcohol as binder, by a series of processes such as slurrying, spraying granulation, machine moulding and cold isostatic pressing, and firing at 1 500 ℃ for 3 h in air （ oxygen partial pressure was 2. 1× 10^4 Pa ）, industrial nitrogen （ oxygen partial pressure was 1×10^3 Pa ） , pure nitrogen （ oxygen partial pressure was 10 Pa） , high purity nitrogen （ oxygen partial pressure was 0.1 Pa ） , and carbon cake embedded atmosphere （ oxygen partial pressure wtas 2.3×10-12 Pa ）. Effects of oxygen partial pressures on the sintering behavior of Cr2 O3 materials were investiga- ted. The results show that （ 1 ） for 3 wt% TiO2-doped specimeas, there is a substantial dependence of sintering on oxygen partial pressure （0. 1 Pa - 2. 1 ×10^4 Pa ） , and the bulk density increases and apparent porosity decreases with oxygen partial pressure decreasing; （2） even if the oxygen partial pressure is 0. 1 Pa, the specimen without TiO2 cannot reach densification sintering; （3） under very low oxygen partial pressure of carbon embedded atmosphere, Cr2O3 materials containing TiO2 or not can attain denzification.
基金the Fundamental Research Funds for the Central Universities,China(No.06500177)the National Natural Science Foundation of China Joint Fund Project(No.U1764255)。
文摘Layered oxide is a promising cathode material for sodium-ion batteries because of its high-capacity,high operating voltage,and simple synthesis.Cycling performance is an important criterion for evaluating the application prospects of batteries.However,facing challenges,including phase transitions,ambient stability,side reactions,and irreversible anionic oxygen activity,the cycling performance of layered oxide cathode materials still cannot meet the application requirements.Therefore,this review proposes several strategies to address these challenges.First,bulk doping is introduced from three aspects:cationic single doping,anionic single doping,and multi-ion doping.Second,homogeneous surface coating and concentration gradient modification are reviewed.In addition,methods such as mixed structure design,particle engineering,high-entropy material construction,and integrated modification are proposed.Finally,a summary and outlook provide a new horizon for developing and modifying layered oxide cathode materials.
基金This work was supported by Postdoctoral Foundation of Northwestern Polytechnical University and Science Research FOundation o
文摘A thermodynamic model has been built up for the interactions between molten Ti alloys and oxide molding materials in the way of decomposition and solution of molding materials, then the influences on the reaction free energy changes have been calculated and discussed.
基金Korea Institute of Materials Science,Grant/Award Number:PNK9370National Research Foundation of Korea,Grant/Award Numbers:NRF-2021R1A2C1014280,NRF-2022R1C1C1011058,NRF-2022M3H446401037201Korea Institute of Science and Technology,Grant/Award Number:2E32581-23-092。
文摘Layered-type transition metal(TM)oxides are considered as one of the most promising cathodes for K-ion batteries because of the large theoretical gravimetric capacity by low molar mass.However,they suffer from severe structural change by de/intercalation and diffusion of K^(+)ions with large ionic size,which results in not only much lower reversible capacity than the theoretical capacity but also poor power capability.Thus,it is important to enhance the structural stability of the layered-type TM oxides for outstanding electrochemical behaviors under the K-ion battery system.Herein,it is investigated that the substitution of the appropriate Ti^(4+)contents enables a highly enlarged reversible capacity of P3-type KxCrO_(2) using combined studies of first-principles calculation and various experiments.Whereas the pristine P3-type KxCrO_(2) just exhibits the reversible capacity of∼120 mAh g^(−1) in the voltage range of 1.5-4.0 V(vs.K^(+)/K),the∼0.61 mol K^(+)corresponding to∼150 mAh g^(−1) can be reversible de/intercalated at the structure of P3-type K0.71[Cr_(0.75)Ti_(0.25)]O_(2) under the same conditions.Furthermore,even at the high current density of 788 mA g^(−1),the specific capacity of P3-type K0.71[Cr_(0.75)Ti_(0.25)]O_(2) is∼120 mAh g^(−1),which is∼81 times larger than that of the pristine P3-type KxCrO_(2).It is believed that this research can provide an effective strategy to improve the electrochemical performances of the cathode materials suffered by severe structural change that occurred during charge/discharge under not only K-ion battery system but also other rechargeable battery systems.
文摘Spherical indium tin oxide （ITO） nanoparticles were synthesized by combustion method using citric acid as fuel and nitrates as oxidizer. The obtained ITO nanoparticles were characterized by TG-DSC, FT-IR, XRD, BET, TEM, and SEM. The ITO nanoparticles grew steadily with the increase of heat treatment temperature, and the 700~C calcined particles had a crystallite size of 25.3 nm and a specific surface area of 26.1 m2.g i The avoidance of chlorine ions in the synthesis process decreases particle agglomeration and promotes powder densification. The 900~C sintered pellet had a density of 67.6% of theoretical density （TD） and increased steadily to 97.3% for the 1400℃ sintered ceramics, respectively.
基金supported by the National Natural Science Foundation of China(Nos.U2341249,12005076,22205112)the Fundamental Research Funds for the Central Universities(No.2025201012)。
文摘The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative continuous modification strategy combining non-thermal plasma(NTP)etching with fluorocarbon passivation.Characterization and kinetic analysis revealed that reactive plasma species—including atomic hydrogen(H),electronically excited molecular hydrogen(H_(2)^(*)),vibrationally excited molecular hydrogen(H_(2)v),and hydrogen ions(H^(+))—dominate the reduction of B_(2)O_(3)through lowering the transition energy barrier and shifting the reaction spontaneity.Subsequent argon plasma fragmentation of C_(8)F_(18)generates fluorocarbon radicals that form conformal passivation coatings(thickness:7 nm)on purified boron surfaces.The modified boron particles exhibit 37.5℃lower exothermic peak temperature and 27.2%higher heat release(14.8 kJ/g vs.11.6 kJ/g)compared to untreated counterparts.Combustion diagnostics reveal 194%increase in maximum flame height(135.10 mm vs.46.03 mm)and 134%enhancement in flame propagation rate(4.44 cm/s vs.1.90 cm/s).This NTP-based surface engineering approach establishes a scalable pathway for developing highperformance boron-based energetic composites.
基金supported by the Natural Science Foundation of China(5207123251871165)。
文摘Understanding the crystal phase evolution of bimetallic oxide anodes is the main concern to profoundly reveal the conversion reaction kinetics and sodium-ion storage mechanisms.Herein,an integrated selfsupporting anode of the Cu-decorated Cu-Mn bimetallic oxides with oxygen vacancies(Ov-BMO-Cu)are in-situ generated by phase separation and hydrogen etching using nanoporous Cu-Mn alloy as selfsacrificial templates.On this basis,we have elucidated the relationship between the phase evolution,oxygen vacancies and sodium-ion storage mechanisms,further demonstrating the evolution of oxygen vacancies and the inhibition effect of manganese oxides as an“anchor”on grain aggregation of copper oxides.The kinetic analyses confirm that the expanded lattice space and increased oxygen vacancies of cycled Ov-BMO-Cu synergistically guarantee effective sodium-ion diffusion and storage mechanisms.Therefore,the Ov-BMO-Cu electrode exhibits higher reversible capacities of 4.04 mA h cm^(-2)at 0.2 mA cm^(-2)after 100 cycles and 2.20 m A h cm^(-2)at 1.0 mA cm^(-2)after 500 cycles.Besides,the presodiated Ov-BMO-Cu anode delivers a considerable reversible capacity of 0.79 m A h cm^(-2)at 1.0 mA cm^(-2)after 60 cycles in full cells with Na_(3)V_(2)(PO_(4))_(3)cathode,confirming its outstanding practicality.Thus,this work is expected to provide enlightenment for designing high-capacity bimetallic oxide anodes.
基金financially supported by the GEMTEX Laboratory-France
文摘Polyester(PET) was pre-activated by atmospheric air plasma and coated by various inorganic oxide nanoparticles(MOx) such as titanium dioxide(TiO2), zinc oxide(ZnO), and silicon oxide(SiO2), using poly(vinylidene fluoride)(PVDF) and chitosan(CT) as binders. The resulting PET-PVDF-MOx-CT composites were thermally compressed and then characterized by scanning electron microscopy, Fourier infrared spectroscopy, thermal gravimetric analysis, and flame retardancy(FR) ability tests. PET modifications resulted in more thermally stable and less harmful composites with weaker hazardous gas release. This was explained in terms of structure compaction that blocks pyrolysis gas emissions.CT incorporation was found to reduce the material susceptibility to oxidation. This judicious procedure also allowed improving flame retardancy ability, by lengthening the combustion delay and slowing the flame propagation. Chitosan also turned out to contribute to a possible synergy with the other polymers present in the synthesized materials. These results provide valuable data that allow understanding the FR phenomena and envisaging low-cost high FR materials from biodegradable raw materials.
基金supported by the National Natural Science Foundation of China(Nos.51372041,51422202, and 21673048)the "Shu Guang" Project(No. 13SG02)supported by Shanghai Municipal Education Commission and Shanghai Education Development Foundation+3 种基金the National Youth Top-notch Talent Support Program in China, China Postdoctoral Science Foundation(No. KLH1615138)Shanghai Nature Science Foundation of China(Nos. 14ZR1416600 and 15ZR1402000)Shanghai Pujiang Program, China(No.16PJ1401100)the International Scientific Partnership Program ISPP at King Saud University for funding this research work through ISPP# 0094
文摘Among various gas sensing materials, metal oxide semiconductors have shown great potential as resistive type sensors. The ordered porous structural metal oxide semiconductors with well-defined meso- or macro-pores chemically synthesized via soft-templating method and nanocasting strategy have high porosity, highly interconnected pore channels and high surface area with enormous active sites for interacting with gaseous molecules. These features enable them good performance in gas sensing, including high sensitivity, fast response and recovery, good selectivity. This review gives a comprehensive summary about the porous metal oxides with focus on the synthesis methods, structure related properties, as well as the modification strategies for gas sensing improved performances.
基金financially supported by the Ministry of Science and Technology of China(No.2012CB933403)the National Natural Science Foundation of China(Nos.51425302 and 51302045)the Beijing Municipal Science and Technology Commission(No.Z121100006812003)
文摘Herein, a facile strategy for the synthesis of sandwich pyrolyzed bacterial cellulose（PBC）/graphene oxide（GO） composite was reported simply by utilizing the large-scale regenerated biomass bacterial cellulose as precursor. The unique and delicate structure where three-dimensional interconnected bacterial cellulose（BC） network embedded in two-dimensional GO skeleton could not only work as an effective barrier to retard polysulfide diffusion during the charge/discharge process to enhance the cyclic stability of the Li–S battery, but also offer a continuous electron transport pathway for the improved rate capability.As a result, by utilizing pure sulfur as cathodes, the Li–S batteries assembled with PBC/GO interlayer can still exhibit a capacity of nearly 600 mAh·g^-1 at 3C and only 0.055% capacity decay per cycle can be observed over 200 cycles. Additionally, the cost-efficient and environmentfriendly raw materials may enable the PBC/GO sandwich interlayer to be an advanced configuration for Li–S batteries.
基金Project supported by the Department of Energy through"Rare Earth Elements From Coal and Coal By-Products"program(DE-FE00027069)
文摘Rare earth elements（REEs） are critical materials and provide significant values to national security,energy production, environmental protection and economic growth. The supply of REEs in U.S. solely relies on import as domestic production of REEs was ceased because of the environmental concerns during mining and lack of competitiveness. Nonetheless, unconventional REEs-containing resources,including produced water. acid mine drainage, and coal and coal byproducts（C＆CBs） contain significant amounts of REEs. However, the concentrations of REEs in these resources are several orders of magnitude lower than that of REEs ores. Thus, extraction of REEs from these materials is challenging. Here we report REEs extraction with environmentally friendly method that successfully concentrated REEs from312 ppm in fly ash to 99.4% in the final product. Especially, the five critically important REEs（Dy, Eu, Nd.Tb. and Y） account for up to ～63% of the total weight of all REEs in the final 99.4%-purity product. Coal fly ash is one of the major solid coal utilization byproducts, representing great potential resources for REEs extraction. Extraction of REEs from these unconventional resources could be the way to secure domestic supply of these critical materials.
基金Project supported by the National Key Research and Development Program of China(Grant No.2017YFA0303600)the National Natural Science Foundation of China(Grant Nos.11474207 and 11374217)
文摘According to first principle simulations, we theoretically predict a type of stable single-layer graphene oxide（C_2O）.Using density functional theory（DFT）, C_2O is found to be a direct gap semiconductor. In addition, we obtain the absorption spectra of the periodic structure of C_2O, which show optical anisotropy. To study the optical properties of C_2O nanostructures, time-dependent density functional theory（TDDFT） is used. The C_2O nanostructure has a strong absorption near 7 eV when the incident light polarizes along the armchair-edge. Besides, we find that the optical properties can be controlled by the edge configuration and the size of the C_2O nanostructure. With the elongation strain increasing, the range of light absorption becomes wider and there is a red shift of absorption spectrum.
基金Funded by the National Natural Science Foundation of China(51677045)the Natural Science Foundation of Heilongjiang Province of China(E201224)
文摘Two different morphologies of ZnO（lotus-shaped, rod-shaped） and ZnO/PVDF composite materials were prepared. The morphologies of ZnO and composite materials were characterized by scanning electron microscopy（SEM） and transmission electron microscopy（TEM）. Fourier transform infrared spectroscopy（FT-IR）, thermal gravimetry（TG）, and X-ray diffraction（XRD） were also used to characterize the chemical structures and phase composites of ZnO and ZnO/PVDF composite materials. Breakdown voltage, dielectric constant and dielectric loss of ZnO/PVDF composite materials were also tested. Microstructure analysis showed that ZnO nanoparticles dispersed uniformly in the matrix. And the dielectric constant expresses a significantly improvement while the dielectric loss and breakdown voltage expresses no significant change. Moreover, dielectric constant keeps an improvement tendency with increasing content of ZnO.
文摘This review is composed of three main parts each of which is written by well-known top specialists that have been,in a way or other,also the main participants of the majority of the developments reported.Thus,after a general part covering the grand lines and more in-depth views of more recent tannin,lignin,carbohydrate and soy bioadhesives,somemix of the other bio raw materials with soy protein and soy flour and some other differently sourced bioadhesives for wood,this review presents a more in-depth part on starch-based wood adhesives and a more indepth part covering plant protein-based adhesives.It must be kept in mind that the review is focused on completely or almost completely biosourced adhesives,the fashionable adhesives derived from mixes of biosourced materials with synthetic resins having been intentionally excluded.This choice was made as the latter constitute only an intermediate interval,possibly temporary if even for a somewhat long times,towards a final full bioeconomy of scale in this field.This review also focuses on more recent results,mainly obtained in the last 10–20 years,thus on adhesive formulations really innovative and sometimes even non-traditional.In all these fields there is still a lot of possibility of innovation for relevant formulation as this field is still in rapid growth.
基金financial supported by the National Natural Science Foundation of China(No.52164043)Jiangxi Province Key Laboratory of Ultra-high Temperature Metal Material(2024SSY05011)。
文摘An investigation into the corrosion behavior of pure Mo50Re and rare earth oxide-doped Mo50Re,produced by spark plasma sintering,was performed in Ringer's physiologic solution at a temperature of 37°C.Potentiodynamic polarization testing indicated a reduction in corrosion current density from 3.1μA·cm^(^(-2))for the pure Mo50Re to 1.6μA·cm^(-2)for Y-doped,1.5μA·cm^(-2)for La-doped,and 2.1μA·cm^(-2)for Y-La co-doped variants.Furthermore,electrochemical impedance spectroscopy revealed that the charge transfer resistance for the rare earth-doped alloys was higher,with values reaching up to 2.4×10^(4)Ω·cm2for Y-doped,3.4×10^(4)Ω·cm2for La-doped,and 2.9×10^(4)Ω·cm2for Y-La co-doped materials,in contrast to the 1.7×10^(3)Ω·cm2resistance observed for the pure Mo50Re.The research highlights the significant enhancement in corrosion resistance conferred by the incorporation of rare earth elements,ascribed to their ability to refine the grain size and purify the grain boundaries.
基金Supported by the National Natural Science Foundation of China(Nos.60778040 60878039)+7 种基金the Program for the Development of Science and Technology of Jilin ProvinceChina(Nos.20090140 20090331)the Eleventh Five-Year Program for Science and Technology of Education Department of Jilin Province China(No.20090422)the Open Project Program of National Laboratory of Superhard Materials of China(No.201004)the Program for the Master Students’ Scientific and Innovative Research of Jilin Normal University China(No.S09010104)
文摘Eu-doped ZnO nanosheets were synthesized successfully by means of the hydrothermal method. The X-ray diffraction（XRD） pattern shows that the sample is a single phase with the ZnO-like wurtzite structure. And the X-ray photoelectron spectrum suggests that there are Eu3＋ ions in the matrix of the sample. Eu3＋-related red emissions resulted from energy transfer were observed for the nanosheets under UV laser excitation. The UV, green and yellow emissions were also seen in the photoluminescence spectra.
基金financially supported by the Russian Foundation for Basic Research(No.13-03-00,888)
文摘The continuous series of perovskite-related oxides with the general formula GdzSr（Al1-xFex）207 0 〈 x 〈 1 were prepared by conventional ceramic technology in air. The pro- cessing stages of Gd2Sr（Al1-xFex）207 0 〈 x 〈 1 phases were investigated by means of X-ray powder diffraction （XRD） and scanning electron microscopy （SEM） with the element phase analysis. The three main stages of GdeSr（All_~Fex）aO7 for- marion are pointed out. The analysis of the mutual influence of intermediate compounds on the synthesis of the target solid solutions of complex composition, in particular for Gd2Sr（All-xFex）207 was carried out. It is determined that the closeness of the reactive mixture composition to the composition of individual compounds Gd2SrA1207 or GdaSrFeaO7 is of importance for the realization of a partic- ular way of GdESr（Al1-xFex）207 solid solutions formation. It is shown that at x ,= 0.2 the reversing in scheme of Gd2Sr（Al1-Fex）207 series formation is observed. The formation of the Gd2Sr（Al1-xFex）207 continuous series is indicated by the monotonic dependence of molar unit cell volume on the iron content x.
基金the financial support of the Council of Scientific and Industrial Research(CSIR),New Delhi(India)(F.No.22(0778)/18/EMR-II).
文摘This work introduces the facile hydrothermal synthesis of double perovskite La2CuCoO6.X-ray diffraction pattern confirmed the formation of a monoclinic phase with P121/c1 symmetry.Transmission electron microscopy results revealed that the self-assembled porous rods were composed of nanocrystallite aggregates.The estimated specific surface area of these mesoporous rods with an average pore diameter of 6 nm was^41 m^2·g^–1.The presence of ions with oxidation states of La^3+,Cu^2+,and Co^2+/Co^3+on the surface of the mesoporous La2CuCoO6 rods was confirmed by X-ray photoelectron spectroscopic analysis.Via cyclicvoltammetry and chronopotentiometry,the electrode fabricated from the mesoporous La2CuCoO6 rods were found to exhibit pseudocapacitive behavior with a specific capacitance of 259.4 F·g^–1 at a current density of 0.5 A·g^–1.An^89%retention in specific capacitance was achieved after 1000 charge/discharge cycles at a constant current density of4 A·g^–1.
文摘For the first time, DySrA104 of K2NiF4-type structure was synthesized. The parameters of DySrA104 ele- mentary unit cell are determined as follows： a = 0.368 （4） nm, c = 1.229 （2） nm, V = 0.166 （4） nm3. The research of the complex aluminates ZnSrA104 （Ln = Nd, Gd, Dy） solid-state process demonstrated the change of the formation mecha- nism among LnSrA104 （Ln = Nd, Gd, Dy） series from DySrA104 oxide. The performed analysis provided a possibility to realize why chemists couldn＇t get DySrA104 for a long period of time.
