A new algorithm namely the interval sampling method, applicable to the analysisof steady-state simulation output is proposed. This algorithm uses the time series analysisto carry out conrrelation analysis of the stead...A new algorithm namely the interval sampling method, applicable to the analysisof steady-state simulation output is proposed. This algorithm uses the time series analysisto carry out conrrelation analysis of the steady-state simulation output so as to obtain theobservation data which are actually uncorrelated in nature. On the basis of theseuncorrelated data gathered, some satisfactory deductions cam be made on the data under re search. A comparison between batch means method and the interval sampling method hasbeen performed by taking the M/M/l queuing system as an example. The results attestedthat the interval sampling method is mere accurate than the batch means method.展开更多
[Objective] The aim was to explore interrelationship between agricultural input and output in Jiangsu and the influence degrees of input factors on agricultur-al output. [Method] Quantitative analysis and evaluation w...[Objective] The aim was to explore interrelationship between agricultural input and output in Jiangsu and the influence degrees of input factors on agricultur-al output. [Method] Quantitative analysis and evaluation were made on agricultural input and output in Jiangsu during 1990-2012 as per factor analysis and regression analysis. [Result] The result of factor analysis showed that since the 1990s, the comprehensive efficiency of agricultural input/output in Jiangsu was growing and in-put/output of agriculture, forestry, animal husbandry and fishery, crop farming, and of food production were extracted, whose scores reflect the changes of input/output ef-ficiencies in terms of agriculture, forestry, animal husbandry, fishery, crop farming and food production in the two decades. The results of regression analysis indicated that the effects of the three indices on agricultural output tended to be volatile and the influence degrees were concluded also by regression parameters. [Conclusion] The research provides theoretical references for agricultural input/output structure in Jiangsu Province.展开更多
The dynamic input output model is well known in economic theory and practice.In this paper,the asymptotic stability and balanced growth solutions of the dynamic input output system are considered.Under some natural ...The dynamic input output model is well known in economic theory and practice.In this paper,the asymptotic stability and balanced growth solutions of the dynamic input output system are considered.Under some natural assumptions which do not require the technical coefficient matrix to be indecomposable,it has been proved that the dynamic input output system is not asymptotically stable and the closed dynamic input output model has a balanced growth solution.展开更多
Investing in projects that support environmental benefits,such as tree harvesting,has the potential to reduce air pollution levels in the atmosphere in the future.However,this kind of investment may increase the curre...Investing in projects that support environmental benefits,such as tree harvesting,has the potential to reduce air pollution levels in the atmosphere in the future.However,this kind of investment may increase the current level of emissions.Therefore,it is necessary to estimate how much the policy affects the current level of CO_(2) emissions.This makes sure the policy doesn’t increase the level of CO_(2) emis-sions.This study aims to analyze the effect of the One Bil-lion Trees program on CO_(2) emissions in New Zealand by employing the 2020 input–output table analysis.This inves-tigation examines the direct and indirect effects of policy on both the demand and supply sides across six regions of New Zealand.The results of this study for the first year of plantation suggest that the policy increases the level of CO_(2) emissions in all regions,especially in the Waikato region.The direct and indirect impact of the policy leads to 64 kt of CO_(2) emissions on the demand side and 270 kt of CO_(2) emis-sions on the supply side.These lead to 0.19 and 0.74%of total CO_(2) emissions being attributed to investment shocks.Continuing the policy is recommended,as it has a low effect on CO_(2) emissions.However,it is crucial to prioritize the use of low-carbon machinery that uses fossil fuels during the plantation process.展开更多
A simulation tool named BITSIM orienting production engineering is developed in order to improve enterprise＇s productivity and making up the scarcity of computer application. The architecture of BITSIM is presented f...A simulation tool named BITSIM orienting production engineering is developed in order to improve enterprise＇s productivity and making up the scarcity of computer application. The architecture of BITSIM is presented first. Hierarchical technique, control strategy based on multi-agent and simulation output analysis are depicted in detail then. In the end, an application example is taken out to prove that this system could be used to analyzing different hypothetical situation and configuring the auxiliary manufacturing system before production.展开更多
Rational inter-industry allocation of environmental responsibilities has great significance to instituting effective policies on industrial environment and transforming the pattern of economic development. From the pe...Rational inter-industry allocation of environmental responsibilities has great significance to instituting effective policies on industrial environment and transforming the pattern of economic development. From the perspective of economic benefit and industrial linkage, this paper discusses the issue of inter-industry allocation of environmental responsibilities. Based on input-output model and three responsibility principles （producer responsibility, consumer responsibility and shared responsibility）, this paper develops seven industrial environmental responsibility indicators and conducts an empirical analysis on the S02 emission responsibilities at China＇s industry level. Results indicate that all these indicators can avoid the double calculation of environmental responsibilities and results using different indicators have significant differences. Some industries such as power, heat production and supply may have little difference of the relative ranking of environmental responsibility under different indicators, but the magnitude of specific assumed responsibilities may have significant changes. Environmental responsibilities of some other industries （such as construction） may seem not important under certain indicators but can be among the most significant under some other indicators. More importantly, despite close connections between these indicators, they reflect different mechanisms of environmental responsibility allocation and have totally different policy significance.展开更多
Fluctuating polarization state-of-light in the optical loop is an important factor that seriously influences the output performance of a multi-carrier source based on re-circulating frequency shifter （RFS）. The reas...Fluctuating polarization state-of-light in the optical loop is an important factor that seriously influences the output performance of a multi-carrier source based on re-circulating frequency shifter （RFS）. The reason for output spectrum instability when no polarization controller （PC） is present in the loop is analyzed theoretically. Numerical simulations for the output spectra of the multi-carrier source with and without PC are conducted, and the trajectories of the several frequency components polarization states on the Poincare sphere with and without PC are compared. The results show that the performance of multi-carrier source based on a RFS can be improved effectively by adjusting the PC in the configuration properly.展开更多
Input-output(Leontief)production function is widely used in economic analysis.And diminishing marginal rate of return is a very well accepted economic fact.Leontief production function normally results in a linear pro...Input-output(Leontief)production function is widely used in economic analysis.And diminishing marginal rate of return is a very well accepted economic fact.Leontief production function normally results in a linear production possibility frontier(PPF)due to its linear feature,whereas diminishing marginal rate of return implies a non-linear PPF.In this paper,the authors aim to fix this problem by considering multiple primary inputs in a simplified two-sector economy.The authors find that it is possible to curve a non-linear PPF by using Leontief production function when the authors add heterogeneous primary inputs.The authors also discuss the PPF using non-linear production function.Furthermore,the authors propose that three commonly used economic presumptions cannot hold in the same framework.These presumptions are"single primary input","fixed-proportion inputs"and"law of diminishing marginal returns".展开更多
This paper discusses a new nonparametric statistical method and applies it to simulation output analysis. This can be used to overcome the limitations of the traditional methods. The steps of making bootstrap interval...This paper discusses a new nonparametric statistical method and applies it to simulation output analysis. This can be used to overcome the limitations of the traditional methods. The steps of making bootstrap interval estimation are given. The simulation results for the examples show that the bootstrap method can produce the valid confidence intervals and improve the simulation precision.展开更多
In the simulation output analysis,there are some measures that should be calculated by time average concept such as the mean queue length.Especially,the confidence interval of those measures might be required for stat...In the simulation output analysis,there are some measures that should be calculated by time average concept such as the mean queue length.Especially,the confidence interval of those measures might be required for statistical analysis.In this situation,the traditional method that utilizes the central limit theorem(CLT)is inapplicable if the output data set has autocorrelation structure.The bootstrap is one of the most suitable methods which can reflect the autocorrelated phenomena in statistical analysis.Therefore,the confidence interval for a time averaged measure having autocorrelation structure can also be calculated by the bootstrap methods.This study introduces the method that constructs these confidence intervals applying the bootstraps.The bootstraps proposed are the threshold bootstrap(TB),the moving block bootstrap(MBB)and stationary bootstrap(SB).Finally,some numerical examples will be provided for verification.展开更多
文摘A new algorithm namely the interval sampling method, applicable to the analysisof steady-state simulation output is proposed. This algorithm uses the time series analysisto carry out conrrelation analysis of the steady-state simulation output so as to obtain theobservation data which are actually uncorrelated in nature. On the basis of theseuncorrelated data gathered, some satisfactory deductions cam be made on the data under re search. A comparison between batch means method and the interval sampling method hasbeen performed by taking the M/M/l queuing system as an example. The results attestedthat the interval sampling method is mere accurate than the batch means method.
文摘[Objective] The aim was to explore interrelationship between agricultural input and output in Jiangsu and the influence degrees of input factors on agricultur-al output. [Method] Quantitative analysis and evaluation were made on agricultural input and output in Jiangsu during 1990-2012 as per factor analysis and regression analysis. [Result] The result of factor analysis showed that since the 1990s, the comprehensive efficiency of agricultural input/output in Jiangsu was growing and in-put/output of agriculture, forestry, animal husbandry and fishery, crop farming, and of food production were extracted, whose scores reflect the changes of input/output ef-ficiencies in terms of agriculture, forestry, animal husbandry, fishery, crop farming and food production in the two decades. The results of regression analysis indicated that the effects of the three indices on agricultural output tended to be volatile and the influence degrees were concluded also by regression parameters. [Conclusion] The research provides theoretical references for agricultural input/output structure in Jiangsu Province.
文摘The dynamic input output model is well known in economic theory and practice.In this paper,the asymptotic stability and balanced growth solutions of the dynamic input output system are considered.Under some natural assumptions which do not require the technical coefficient matrix to be indecomposable,it has been proved that the dynamic input output system is not asymptotically stable and the closed dynamic input output model has a balanced growth solution.
基金Open Access funding enabled and organized by CAUL and its Member Institutions
文摘Investing in projects that support environmental benefits,such as tree harvesting,has the potential to reduce air pollution levels in the atmosphere in the future.However,this kind of investment may increase the current level of emissions.Therefore,it is necessary to estimate how much the policy affects the current level of CO_(2) emissions.This makes sure the policy doesn’t increase the level of CO_(2) emis-sions.This study aims to analyze the effect of the One Bil-lion Trees program on CO_(2) emissions in New Zealand by employing the 2020 input–output table analysis.This inves-tigation examines the direct and indirect effects of policy on both the demand and supply sides across six regions of New Zealand.The results of this study for the first year of plantation suggest that the policy increases the level of CO_(2) emissions in all regions,especially in the Waikato region.The direct and indirect impact of the policy leads to 64 kt of CO_(2) emissions on the demand side and 270 kt of CO_(2) emis-sions on the supply side.These lead to 0.19 and 0.74%of total CO_(2) emissions being attributed to investment shocks.Continuing the policy is recommended,as it has a low effect on CO_(2) emissions.However,it is crucial to prioritize the use of low-carbon machinery that uses fossil fuels during the plantation process.
文摘A simulation tool named BITSIM orienting production engineering is developed in order to improve enterprise＇s productivity and making up the scarcity of computer application. The architecture of BITSIM is presented first. Hierarchical technique, control strategy based on multi-agent and simulation output analysis are depicted in detail then. In the end, an application example is taken out to prove that this system could be used to analyzing different hypothetical situation and configuring the auxiliary manufacturing system before production.
文摘Rational inter-industry allocation of environmental responsibilities has great significance to instituting effective policies on industrial environment and transforming the pattern of economic development. From the perspective of economic benefit and industrial linkage, this paper discusses the issue of inter-industry allocation of environmental responsibilities. Based on input-output model and three responsibility principles （producer responsibility, consumer responsibility and shared responsibility）, this paper develops seven industrial environmental responsibility indicators and conducts an empirical analysis on the S02 emission responsibilities at China＇s industry level. Results indicate that all these indicators can avoid the double calculation of environmental responsibilities and results using different indicators have significant differences. Some industries such as power, heat production and supply may have little difference of the relative ranking of environmental responsibility under different indicators, but the magnitude of specific assumed responsibilities may have significant changes. Environmental responsibilities of some other industries （such as construction） may seem not important under certain indicators but can be among the most significant under some other indicators. More importantly, despite close connections between these indicators, they reflect different mechanisms of environmental responsibility allocation and have totally different policy significance.
基金supported by the Chinese Universities Scientific Fund (No. BUPT 2011RC009)the BUPT Excellent Ph.D. Students Foundation (No. CX201121)the Research Fund for the Doctoral Program of Higher Education (No. 20110005110014)
文摘Fluctuating polarization state-of-light in the optical loop is an important factor that seriously influences the output performance of a multi-carrier source based on re-circulating frequency shifter （RFS）. The reason for output spectrum instability when no polarization controller （PC） is present in the loop is analyzed theoretically. Numerical simulations for the output spectra of the multi-carrier source with and without PC are conducted, and the trajectories of the several frequency components polarization states on the Poincare sphere with and without PC are compared. The results show that the performance of multi-carrier source based on a RFS can be improved effectively by adjusting the PC in the configuration properly.
基金China Postdoctoral Science Foundation under Grant No.2020M671504the National Social Science Foundation of China under Grant No.14AZD085the National Natural Science Foundation of China under Grant Nos.71373106,71903186。
文摘Input-output(Leontief)production function is widely used in economic analysis.And diminishing marginal rate of return is a very well accepted economic fact.Leontief production function normally results in a linear production possibility frontier(PPF)due to its linear feature,whereas diminishing marginal rate of return implies a non-linear PPF.In this paper,the authors aim to fix this problem by considering multiple primary inputs in a simplified two-sector economy.The authors find that it is possible to curve a non-linear PPF by using Leontief production function when the authors add heterogeneous primary inputs.The authors also discuss the PPF using non-linear production function.Furthermore,the authors propose that three commonly used economic presumptions cannot hold in the same framework.These presumptions are"single primary input","fixed-proportion inputs"and"law of diminishing marginal returns".
文摘This paper discusses a new nonparametric statistical method and applies it to simulation output analysis. This can be used to overcome the limitations of the traditional methods. The steps of making bootstrap interval estimation are given. The simulation results for the examples show that the bootstrap method can produce the valid confidence intervals and improve the simulation precision.
文摘In the simulation output analysis,there are some measures that should be calculated by time average concept such as the mean queue length.Especially,the confidence interval of those measures might be required for statistical analysis.In this situation,the traditional method that utilizes the central limit theorem(CLT)is inapplicable if the output data set has autocorrelation structure.The bootstrap is one of the most suitable methods which can reflect the autocorrelated phenomena in statistical analysis.Therefore,the confidence interval for a time averaged measure having autocorrelation structure can also be calculated by the bootstrap methods.This study introduces the method that constructs these confidence intervals applying the bootstraps.The bootstraps proposed are the threshold bootstrap(TB),the moving block bootstrap(MBB)and stationary bootstrap(SB).Finally,some numerical examples will be provided for verification.
