The major objective of this work was to establish a structural state-space model to estimate the dynamic origin-destination(O-D) matrices for urban rail transit network, using in- and out-flows at each station from au...The major objective of this work was to establish a structural state-space model to estimate the dynamic origin-destination(O-D) matrices for urban rail transit network, using in- and out-flows at each station from automatic fare collection(AFC) system as the real time observed passenger flow counts. For lacking of measurable passenger flow information, the proposed model employs priori O-D matrices and travel time distribution from historical travel records in AFC system to establish the dynamic system equations. An arriving rate based on travel time distribution is defined to identify the dynamic interrelations between time-varying O-D flows and observed flows, which greatly decreases the computational complexity and improve the model's applicability for large-scale network. This methodology is tested in a real transit network from Beijing subway network in China through comparing the predicted matrices with the true matrices. Case study results indicate that the proposed model is effective and applicative for estimating dynamic O-D matrices for large-scale rail transit network.展开更多
This paper develops an optimization model that determines the optimal location for Bluetooth nodes used in the determination of the origin-destination matrix within an urban network. To analyze the effectiveness of th...This paper develops an optimization model that determines the optimal location for Bluetooth nodes used in the determination of the origin-destination matrix within an urban network. To analyze the effectiveness of the model, the city of Akron, OH was utilized as a testing location. The Average Daily Traffic (ADT) was used to determine intersections that have the greatest number of Bluetooth responses. Along with maximizing the number of Bluetooth responses, the model applies financial constraints when determining the number of nodes in the urban network. The developed model selected seven locations to deploy nodes in order to stay within the financial constraints and to maximize the possible number of responses from vehicles within the Akron urban network.展开更多
The paper analyses integrating origin-destination (O-D) survey results with stochastic user equilibrium (SUE) in traffic assignment. The two methods are widely used in transportation planning but their applications ha...The paper analyses integrating origin-destination (O-D) survey results with stochastic user equilibrium (SUE) in traffic assignment. The two methods are widely used in transportation planning but their applications have not yet fully integrated. While O-D gives a generalized trip patterns, purpose and characteristics, SUE provides optimal trip distributions using the characteristics found in O-D survey. The paper utilized O-D and SUE in route relocation study for the town of Coamo in Puerto Rico. The O-D survey was used initially in studying possible trip distribution and assignment for the new route. Initial distribution and assignment of traffic to the existing roadway networks and the proposed route were allocated utilizing the O-D survey findings. The SUE was then used to optimize the assignments considering roadway characteristics such as number of lanes, capacity limits, free flow speed, signal spacing density, travel time and gasoline cost. The travel time was optimized through the Bureau of Public Roads (BPR) equation found in 2000 HCM. The optimal trips found from the SUE were then used to propose the final alignment of the new route. Traffic assignment from the SUE was slightly different from those initially assigned using O-D, indicating there was optimization. The assignment on new route was increased by 13.8% from the one assigned using O-D while assignment on the existing link was reduced by 22%.展开更多
It is proposed firstly that the original phase and the time-delay are the main factors which affect the measuring resolution of the multitone complex envelope method. The effects of these factors are analysed and chec...It is proposed firstly that the original phase and the time-delay are the main factors which affect the measuring resolution of the multitone complex envelope method. The effects of these factors are analysed and checked by the computer simulation. Finally, three possible ways to eliminate these effects are given.展开更多
In the early nineties of the last century, the transportation system in Gaza Strip was born and new infrastructure projects, especially road networks, were constructed. However, the construction lacked efficient appli...In the early nineties of the last century, the transportation system in Gaza Strip was born and new infrastructure projects, especially road networks, were constructed. However, the construction lacked efficient application of a transportation planning process. Transportation planning relies on traffic demand forecasting process. The conventional process is impeded by extensive amount of socioeconomic data. One of the most widely-used models which mitigate this problem is the TransCAD Model. This model is rarely used in Gaza Strip for traffic demand forecasting, and most of the practices depend mainly on a constant growth rate of traffic. Therefore, the main objective of this research is to apply this model in Gaza City for traffic estimation. This model estimates the origin-destination matrix based on traffic count. The traffic count was carried out at 36 intersections distributed around Gaza City. The results of traffic flow estimation obtained from TransCAD are assigned to the Gaza maps using the GIS techniques for spatial analysis. It is shown that the most congested area at present is the middle of the city especially at Aljala-Omer Almokhtar intersection. Therefore, improvement scenarios of this area should be carried out. The results of calibration of traffic flow estimation show that the differences between the estimated and the actual flows were less than 10%. In addition, network evaluation results show that the network is expected to be more congested in 2015. This work can be used by transportation planners for testing any network improvement scenarios and for studying their network performance.展开更多
Developing an understanding of the socio-economic factors that can be used to generate truck trip productions and attractions in small and medium sized communities can be used to improve travel models and provide bett...Developing an understanding of the socio-economic factors that can be used to generate truck trip productions and attractions in small and medium sized communities can be used to improve travel models and provide better information upon which infrastructure decisions are made. Unfortunately, it is difficult to collect this data in a timely, cost-effective manner. This paper presents a methodology that uses matrix estimation techniques from existing traffic counts to develop origin/destination pairs that can be used to statistically develop truck trip generation models. A case study is presented and a model is presented for one smaller urban community.展开更多
基金Project(51478036)supported by the National Natural Science Foundation of ChinaProject(20120009110016)supported by Research Fund for Doctoral Program of Higher EducationChina
文摘The major objective of this work was to establish a structural state-space model to estimate the dynamic origin-destination(O-D) matrices for urban rail transit network, using in- and out-flows at each station from automatic fare collection(AFC) system as the real time observed passenger flow counts. For lacking of measurable passenger flow information, the proposed model employs priori O-D matrices and travel time distribution from historical travel records in AFC system to establish the dynamic system equations. An arriving rate based on travel time distribution is defined to identify the dynamic interrelations between time-varying O-D flows and observed flows, which greatly decreases the computational complexity and improve the model's applicability for large-scale network. This methodology is tested in a real transit network from Beijing subway network in China through comparing the predicted matrices with the true matrices. Case study results indicate that the proposed model is effective and applicative for estimating dynamic O-D matrices for large-scale rail transit network.
文摘This paper develops an optimization model that determines the optimal location for Bluetooth nodes used in the determination of the origin-destination matrix within an urban network. To analyze the effectiveness of the model, the city of Akron, OH was utilized as a testing location. The Average Daily Traffic (ADT) was used to determine intersections that have the greatest number of Bluetooth responses. Along with maximizing the number of Bluetooth responses, the model applies financial constraints when determining the number of nodes in the urban network. The developed model selected seven locations to deploy nodes in order to stay within the financial constraints and to maximize the possible number of responses from vehicles within the Akron urban network.
文摘The paper analyses integrating origin-destination (O-D) survey results with stochastic user equilibrium (SUE) in traffic assignment. The two methods are widely used in transportation planning but their applications have not yet fully integrated. While O-D gives a generalized trip patterns, purpose and characteristics, SUE provides optimal trip distributions using the characteristics found in O-D survey. The paper utilized O-D and SUE in route relocation study for the town of Coamo in Puerto Rico. The O-D survey was used initially in studying possible trip distribution and assignment for the new route. Initial distribution and assignment of traffic to the existing roadway networks and the proposed route were allocated utilizing the O-D survey findings. The SUE was then used to optimize the assignments considering roadway characteristics such as number of lanes, capacity limits, free flow speed, signal spacing density, travel time and gasoline cost. The travel time was optimized through the Bureau of Public Roads (BPR) equation found in 2000 HCM. The optimal trips found from the SUE were then used to propose the final alignment of the new route. Traffic assignment from the SUE was slightly different from those initially assigned using O-D, indicating there was optimization. The assignment on new route was increased by 13.8% from the one assigned using O-D while assignment on the existing link was reduced by 22%.
文摘It is proposed firstly that the original phase and the time-delay are the main factors which affect the measuring resolution of the multitone complex envelope method. The effects of these factors are analysed and checked by the computer simulation. Finally, three possible ways to eliminate these effects are given.
文摘In the early nineties of the last century, the transportation system in Gaza Strip was born and new infrastructure projects, especially road networks, were constructed. However, the construction lacked efficient application of a transportation planning process. Transportation planning relies on traffic demand forecasting process. The conventional process is impeded by extensive amount of socioeconomic data. One of the most widely-used models which mitigate this problem is the TransCAD Model. This model is rarely used in Gaza Strip for traffic demand forecasting, and most of the practices depend mainly on a constant growth rate of traffic. Therefore, the main objective of this research is to apply this model in Gaza City for traffic estimation. This model estimates the origin-destination matrix based on traffic count. The traffic count was carried out at 36 intersections distributed around Gaza City. The results of traffic flow estimation obtained from TransCAD are assigned to the Gaza maps using the GIS techniques for spatial analysis. It is shown that the most congested area at present is the middle of the city especially at Aljala-Omer Almokhtar intersection. Therefore, improvement scenarios of this area should be carried out. The results of calibration of traffic flow estimation show that the differences between the estimated and the actual flows were less than 10%. In addition, network evaluation results show that the network is expected to be more congested in 2015. This work can be used by transportation planners for testing any network improvement scenarios and for studying their network performance.
文摘Developing an understanding of the socio-economic factors that can be used to generate truck trip productions and attractions in small and medium sized communities can be used to improve travel models and provide better information upon which infrastructure decisions are made. Unfortunately, it is difficult to collect this data in a timely, cost-effective manner. This paper presents a methodology that uses matrix estimation techniques from existing traffic counts to develop origin/destination pairs that can be used to statistically develop truck trip generation models. A case study is presented and a model is presented for one smaller urban community.
