Mimicking the electric microenvironment of natural tissue is a promising strategy for developing biomedical implants. However, current research has not taken biomimetic electrical functional units into consideration w...Mimicking the electric microenvironment of natural tissue is a promising strategy for developing biomedical implants. However, current research has not taken biomimetic electrical functional units into consideration when designing biomedical implants. In this research, ordered structures with Schottky heterojunction functional unit (OSSH) were constructed on titanium implant surfaces for bone regeneration regulation. The Schottky heterojunction functional unit is composed of periodically distributed titanium microdomain and titanium oxide microdomain with different carrier densities and surface potentials. The OSSH regulates the M2-type polarization of macrophages to a regenerative immune response by activating the PI3K-AKT-mTOR signal pathway and further promotes osteogenic differentiation of rat bone marrow mesenchymal stem cells. This work provides fundamental insights into the biological effects driven by the Schottky heterojunction functional units that can electrically modulate osteogenesis.展开更多
Weak interactions prevent the magnetic particles from achieving excellent electromagnetic wave absorp-tion(EMA)at a low filler loading(FL).The construction of one-dimensional magnetic metal fibers(1D-MMFs)contributes ...Weak interactions prevent the magnetic particles from achieving excellent electromagnetic wave absorp-tion(EMA)at a low filler loading(FL).The construction of one-dimensional magnetic metal fibers(1D-MMFs)contributes to the formation of an electromagnetic(EM)coupling network,enhancing EM properties at a low FL.However,precisely controlling the length of 1D-MMFs to regulate permittivity at low FL poses a challenge.Herein,a novel magnetic field-assisted growth strategy was used to fabricate Co-based fibers with adjustable permittivity and aspect ratios.With a variety of FL changes,centimeter-level Co long fibers(Co-lf)consistently exhibited higher permittivity than Co particles and Co short fibers due to the enhancement of the effective EM coupling.The Co-lf exhibits excellent EMA performance(-54.85 dB,5.8 GHz)at 10 wt.%FL.Meanwhile,heterogeneous interfaces were introduced to increase the interfacial polarization through a fine phosphorylation design,resulting in elevated EMA performances(-51.50 dB,6.6 GHz)at 10 wt.%FL for Co_(2)P/Co long fibers.This study improves the orderliness of the particle arrangement by regulating the length of 1D-MMFs,which affects the behavior of electrons inside the fibers,providing a new perspective for improving the EMA properties of magnetic materials at a low FL.展开更多
14H, 18R and 24R long-period stacking ordered （LPSO） structures were observed in the as-cast Mg-3Cu-1Mn-2Zn-1Y damping alloy using transmission electron microscopy （TEM）. These LPSO structures contained Mg, Y, Cu ...14H, 18R and 24R long-period stacking ordered （LPSO） structures were observed in the as-cast Mg-3Cu-1Mn-2Zn-1Y damping alloy using transmission electron microscopy （TEM）. These LPSO structures contained Mg, Y, Cu and Zn and thus they were quaternary phases. Sharp diffraction pattern of the 24R structure was obtained and the angle between and g10024R was measured to be 5.03°. During high resolution TEM observations, lattice fringes with two characteristic spacings were observed within the 24R structure. Based on the experimental results, 6H, 7H and three 8H are suggested as the building blocks of 18R, 14H and 24R structures, respectively. The 24R unit cell can be interpreted as the stacking of 8H building blocks in the same shear direction with a shear angle of about 5.03°. The imperfect 24R structures are in order or disorder arrangements of principal 8H and minor 6H blocks. This double-block structure model is also applicable to other reported defects in LPSO structures.展开更多
Mg-Zn-Y alloys with long-period stacking ordered structures were prepared by an ingot casting method. The corrosion performance of Mg-Zn-Y alloys was studied by combining gas-collecting test, immersion test and electr...Mg-Zn-Y alloys with long-period stacking ordered structures were prepared by an ingot casting method. The corrosion performance of Mg-Zn-Y alloys was studied by combining gas-collecting test, immersion test and electrochemical measurements in order to determine the corrosion rate and mechanism of the alloys. The results showed that the volume fraction of Mg（12）YZn phase increased and the shape of the Mg（12）YZn phase changed from discontinuous to continuous net-like with increasing Zn and Y content. The corrosion rate of the alloys greatly depended on the distribution and volume fraction of the Mg（12）YZn phase. Corrosion products appeared at the junction of Mg phase and Mg（12）YZn phase, indicating that the Mg（12）YZn phase accelerated galvanic corrosion of Mg matrix. Mg（97）Zn1Y2 alloy shows the lowest corrosion rate due to the continuous distribution of Mg（12）YZn phase.展开更多
The microstructure and mechanical properties of Mg94Zn2Y4 extruded alloy containing long-period stacking ordered structures were systematically investigated by SEM and TEM analyses. The results show that the 18R-LPSO ...The microstructure and mechanical properties of Mg94Zn2Y4 extruded alloy containing long-period stacking ordered structures were systematically investigated by SEM and TEM analyses. The results show that the 18R-LPSO structure and α-Mg phase are observed in cast Mg94Zn2Y4 alloy. After extrusion, the LPSO structures are delaminated and Mg-slices with width of 50-200 nm are generated. By ageing at 498 K for 36 h, the ageing peak is attained andβ′phase is precipitated. Due to this novel precipitation, the microhardness ofα-Mg matrix increases apparently from HV108.9 to HV129.7. While the microhardness for LPSO structure is stabilized at about HV145. TEM observations and SAED patterns indicate that the β′ phase has unique orientation relationships betweenα-Mg and LPSO structures, the direction in the close-packed planes ofβ′precipitates perpendicular to that ofα-Mg and LPSO structures. The ultimate tensile strength for the peak-aged alloy achieves 410.7 MPa and the significant strength originates from the coexistence ofβ′precipitates and 18R-LPSO structures.展开更多
Currently,electromagnetic radiation and interference have a significant effect on the operation of electronic devices and human health systems.Thus,developing excellent microwave absorbers have a huge significance in ...Currently,electromagnetic radiation and interference have a significant effect on the operation of electronic devices and human health systems.Thus,developing excellent microwave absorbers have a huge significance in the material research field.Herein,a kind of ultrafine zinc oxide(ZnO)nanoparticles(NPs)supported on three-dimensional(3D)ordered mesoporous carbon spheres(ZnO/OMCS)is prepared from silica inverse opal by using phenolic resol precursor as carbon source.The prepared lightweight ZnO/OMCS nanocomposites exhibit 3D ordered carbon sphere array and highly dispersed ultrafine ZnO NPs on the mesoporous cell walls of carbon spheres.ZnO/OMCS-30 shows microwave absorbing ability with a strong absorption(−39.3 dB at 10.4 GHz with a small thickness of 2 mm)and a broad effective absorption bandwidth(9.1 GHz).The outstanding microwave absorbing ability benefits to the well-dispersed ultrafine ZnO NPs and the 3D ordered mesoporous carbon spheres structure.This work opened up a unique way for developing lightweight and high-efficient carbon-based microwave absorbing materials.展开更多
Highly ordered mesoporous NiMoO4 material was successfully synthesized using mesoporous silica KIT-6 as hard template via vacuum nanocasting method. The structure was characterized by means of XRD, TEM, N2 adsorption-...Highly ordered mesoporous NiMoO4 material was successfully synthesized using mesoporous silica KIT-6 as hard template via vacuum nanocasting method. The structure was characterized by means of XRD, TEM, N2 adsorption-desorption, Raman and FT-IR. The mesoporous NiMoO4 with the coexistence of a-NiMoO4 and fl-NiMoO4 showed well-ordered mesoporous structure, a bimodal pore size distribution and crystalline framework. The catalytic performance of NiMoOa was investigated for oxidative dehydrogenation of propane. It is demonstrated that the mesoporous NiMoO4 catalyst with more surface active oxygen species showed better catalytic performance in oxidative dehydrogena- tion of propane in comparison with bulk NiMoO4.展开更多
Simultaneously enhancing the reaction kinetics,mass transport,and gas release during alkaline hydrogen evolution reaction(HER)is critical to minimizing the reaction polarization resistance,but remains a big challenge....Simultaneously enhancing the reaction kinetics,mass transport,and gas release during alkaline hydrogen evolution reaction(HER)is critical to minimizing the reaction polarization resistance,but remains a big challenge.Through rational design of a hierarchical multiheterogeneous three-dimensionally(3D)ordered macroporous Mo_(2)C-embedded nitrogen-doped carbon with ultrafine Ru nanoclusters anchored on its surface(OMS Mo_(2)C/NC-Ru),we realize both electronic and morphologic engineering of the catalyst to maximize the electrocatalysis performance.The formed Ru-NC heterostructure shows regulative electronic states and optimized adsorption energy with the intermediate H*,and the Mo_(2)C-NC heterostructure accelerates the Volmer reaction due to the strong water dissociation ability as confirmed by theoretical calculations.Consequently,superior HER activity in alkaline solution with an extremely low overpotential of 15.5 mV at 10 mAcm^(−2)with the mass activity more than 17 times higher than that of the benchmark Pt/C,an ultrasmall Tafel slope of 22.7 mV dec−1,and excellent electrocatalytic durability were achieved,attributing to the enhanced mass transport and favorable gas release process endowed from the unique OMS Mo_(2)C/NC-Ru structure.By oxidizing OMS Mo_(2)C/NC-Ru into OMS MoO_(3)-RuO_(2)catalyst,it can also be applied as efficient oxygen evolution electrocatalyst,enabling the construction of a quasi-symmetric electrolyzer for overall water splitting.Such a device's performance surpassed the state-of-the-art Pt/C||RuO2 electrolyzer.This study provides instructive guidance for designing 3D-ordered macroporous multicomponent catalysts for efficient catalytic applications.展开更多
Both the solid solution and precipitation are mainly strengthening mechanism for the magnesium-based alloys. A great number of alloying elements can be dissolved into the Mg matrix to form the solutes and precipitates...Both the solid solution and precipitation are mainly strengthening mechanism for the magnesium-based alloys. A great number of alloying elements can be dissolved into the Mg matrix to form the solutes and precipitates.Moreover, the type of precipitates varies with different alloying elements and heat treatments, which makes it quite difficult to understand the formation mechanism of the precipitates in Mg-based alloys in depth. Thus, it is very hard to give a systematical regularity in precipitation process for the Mg-based alloys. This review is mainly focused on the formation and microstructural evolution of the precipitates, as a hot topic for the past few years, including Guinier-Preston Zones, quasicrystals and long-period stacking ordered phases formed in a number of Mg-TM-RE alloy systems, where TM = Al, Zn, Zr and RE = Y,Gd, Hd, Ce and La.展开更多
The development of high-performance microwave absorption materials with strong absorption capacity and broad bandwidth is highly desirable in the field of electromagnetic pollution protection.Herein,ultralight polyimi...The development of high-performance microwave absorption materials with strong absorption capacity and broad bandwidth is highly desirable in the field of electromagnetic pollution protection.Herein,ultralight polyimide-based graphene foam with ordered lamellar structure is precisely designed and controllably constructed by bidirectional freezing process.More lamellar interfaces formed inside the foam per unit volume effectively facilitate the layer-by-layer dissipation for the vertical incident electromagnetic waves,thereby endowing the foam with efficient broadband electromagnetic absorption performance.More importantly,electromagnetic absorption performance can be controllably adjusted by optimizing impedance distribution and microstructure of skeletons.As a result,the optimized foam with an ultralow density of 9.10 mg/cm^(3)presents a minimum reflection loss value of-61.29 dB at 9.25 GHz and an effective absorption bandwidth of 5.51 GHz(7.06-12.57 GHz,covering the whole X band) when the thickness is 4.75 mm.展开更多
Sodium-ion hybrid capacitor(SIHC)is one of the most promising alternatives for large-scale energy storage due to its high energy and power densities,natural abundance,and low cost.However,overcoming the imbalance betw...Sodium-ion hybrid capacitor(SIHC)is one of the most promising alternatives for large-scale energy storage due to its high energy and power densities,natural abundance,and low cost.However,overcoming the imbalance between slow Na^(+)reaction kinetics of battery-type anodes and rapid ion adsorption/desorption of capacitive cathodes is a significant challenge.Here,we propose the high-rate-performance NiS_(2)@OMGC anode material composed of monodispersed NiS_(2) nanocrystals(8.8±1.7 nm in size)and N,S-co-doped graphenic carbon(GC).The NiS_(2)@OMGC material has a three-dimensionally ordered macroporous(3DOM)morphology,and numerous NiS_(2) nanocrystals are uniformly embedded in GC,forming a core-shell structure in the local area.Ultrafine NiS_(2) nanocrystals and their nano-microstructure demonstrate high pseudocapacitive Na-storage capability and thus excellent rate performance(355.7 mAh/g at 20.0 A/g).A SIHC device fabricated using NiS_(2)@OMGC and commercial activated carbon(AC)cathode exhibits ultrahigh energy densities(197.4 Wh/kg at 398.8 W/kg)and power densities(43.9 kW/kg at 41.3 Wh/kg),together with a long life span.This outcome exemplifies the rational architecture and composition design of this type of anode material.This strategy can be extended to the design and synthesis of a wide range of high-performance electrode materials for energy storage applications.展开更多
Microstructures and precipitation behaviours of Mg94Y4Zn2 （at. %） extruded alloy during solution treatment and ageing processes were investigated. Three major phases were observed in the as-cast Ug94Zn2Y4 alloy：α-...Microstructures and precipitation behaviours of Mg94Y4Zn2 （at. %） extruded alloy during solution treatment and ageing processes were investigated. Three major phases were observed in the as-cast Ug94Zn2Y4 alloy：α-Mg, block shaped 1 8R long period stacking ordered （LPSO） phase and Mg24Y5 cuboid particles. After homogenization and extrusion, the block shaped LPSO phase changed into plate-like shape aligned along the direction of extrusion. During solution treatment, a small fraction of LPSO phase was transformed from 18R structure to 14H type. The nano-scale β＇ phase with its close-packed planes being perpendicular to the direction of both α-Mg and LPSO structure was precipitated at ageing stage. The coexistence of β＇ and LPSO phase contributes to the strengthening of the alloy, with microhardness for the matrix and LPSO structures reaching 145.8 and 155,0 HV, respectively.展开更多
The morphology and crystal structure of the precipitates in Mg-7Gd-3Y-1Nd-1Zn-0.5Zr(wt.%)alloy with fine plate-like 14H-LPSO structures aged at 240℃were investigated using transmission electron microscopy(TEM)and hig...The morphology and crystal structure of the precipitates in Mg-7Gd-3Y-1Nd-1Zn-0.5Zr(wt.%)alloy with fine plate-like 14H-LPSO structures aged at 240℃were investigated using transmission electron microscopy(TEM)and high-angle annular dark-field scanning transmission electron microscopy(HAADF-STEM).Fine plate-like 14H-LPSO structures precipitate after heat treatment at 500℃for 2 h,andβ-type phases precipitate after the alloy is aged at 240℃.The long-period atomic stacking sequence of 14H-LPSO structures along the[0001]αdirection is ABABCACACACBABA.After being aged at 240℃for 2 h,theβ-type phases are the ordered solution clusters,zig-zag GP zones,and a small number ofβ′phases.The peak hardness is obtained at 240℃for 18 h with a Brinell hardness of 112,theβ-type phases areβ’phases and local RE-rich structures.After being aged at 240℃for 100 h,theβ-type phases areβ’,β1 andβ’F phases.β′phases nucleate from the zig-zag GP zones directly withoutβ″phases,and then transform intoβ1 phase byβ’→β’F→β1 transformations.The Zn not only can form LPSO structure,but also is the constituent element ofβ1 phases.LPSO structures have a certain hindrance to the coarsening ofβ’andβ1 along<0001>α.展开更多
Traditional heat conductive epoxy composites often fall short in meeting the escalating heat dissipation demands of large-power,high-frequency,and highvoltage insulating packaging applications,due to the challenge of ...Traditional heat conductive epoxy composites often fall short in meeting the escalating heat dissipation demands of large-power,high-frequency,and highvoltage insulating packaging applications,due to the challenge of achieving high thermal conductivity(k),desirable dielectric performance,and robust thermomechanical properties simultaneously.Liquid crystal epoxy(LCE)emerges as a unique epoxy,exhibiting inherently high k achieved through the self-assembly of mesogenic units into ordered structures.This characteristic enables liquid crystal epoxy to retain all the beneficial physical properties of pristine epoxy,while demonstrating a prominently enhanced k.As such,liquid crystal epoxy materials represent a promising solution for thermal management,with potential to tackle the critical issues and technical bottlenecks impeding the increasing miniaturization of microelectronic devices and electrical equipment.This article provides a comprehensive review on recent advances in liquid crystal epoxy,emphasizing the correlation between liquid crystal epoxy’s microscopic arrangement,organized mesoscopic domain,k,and relevant physical properties.The impacts of LC units and curing agents on the development of ordered structure are discussed,alongside the consequent effects on the k,dielectric,thermal,and other properties.External processing factors such as temperature and pressure and their influence on the formation and organization of structured domains are also evaluated.Finally,potential applications that could benefit from the emergence of liquid crystal epoxy are reviewed.展开更多
Magnesium alloys with a long-period stacking ordered(LPSO)structure usually possess excellent static strength,but their fatigue behaviors are poorly understood.This work presents the effect of the LPSO structure on th...Magnesium alloys with a long-period stacking ordered(LPSO)structure usually possess excellent static strength,but their fatigue behaviors are poorly understood.This work presents the effect of the LPSO structure on the crack behaviors of Mg alloys in a very high cycle fatigue(VHCF)regime.The LPSO lamellas lead to a facet-like cracking process along the basal planes at the crack initiation site and strongly prohibit the early crack propagation by deflecting the growth direction.The stress intensity factor at the periphery of the faceted area is much higher than the conventional LPSO-free Mg alloys,contributing higher fatigue crack propagation threshold of LPSO-containing Mg alloys.Microstructure observation at the facets reveals a layer of ultrafine grains at the fracture surface due to the cyclic contact of the crack surface,which supports the numerous cyclic pressing model describing the VHCF crack initiation behavior.展开更多
Formation of β’ phase in long-period stacking ordered(LPSO) structures in an Mg;Co;Y;(at.%) alloy after aging at 200 °C for 24 h or electron beam(EB) irradiation has been studied by high-angle annular dark-fiel...Formation of β’ phase in long-period stacking ordered(LPSO) structures in an Mg;Co;Y;(at.%) alloy after aging at 200 °C for 24 h or electron beam(EB) irradiation has been studied by high-angle annular dark-field scanning transmission electron microscopy(HAADFSTEM). β’ phase was precipitated only in the Mg matrix but not in LPSO structures after aging at 200 °C for 24 h. LPSO structure containing stacking defects transforms into the β’-long phase during EB irradiation, which plays a key role in accelerating solute atoms’ diffusion. New complex β’(LPSO) structures formed in the alloy after EB irradiation, such as β’(12 H) structure with an orthorhombic lattice(Mg;Y, Cmcm,a = 2 _(a0)= 0.642 nm, b=4√3_(a0), c = 6 _(c0)= 3.12 nm).展开更多
Lithium-sulfur batteries(LSBs)have drawn significant attention owing to their high theoretical discharge capacity and energy density.However,the dissolution of long-chain polysulfides into the electrolyte during the c...Lithium-sulfur batteries(LSBs)have drawn significant attention owing to their high theoretical discharge capacity and energy density.However,the dissolution of long-chain polysulfides into the electrolyte during the charge and discharge process(“shuttle effect”)results in fast capacity fading and inferior electrochemical performance.In this study,Mn_(2)O_(3)with an ordered mesoporous structure(OM-Mn_(2)O_(3))was designed as a cathode host for LSBs via KIT-6 hard templating,to effectively inhibit the polysulfide shuttle effect.OM-Mn_(2)O_(3)offers numerous pores to confine sulfur and tightly anchor the dissolved polysulfides through the combined effects of strong polar-polar interactions,polysulfides,and sulfur chain catenation.The OM-Mn_(2)O_(3)/S composite electrode delivered a discharge capacity of 561 mAh g^(-1) after 250 cycles at 0.5 C owing to the excellent performance of OM-Mn_(2)O_(3).Furthermore,it retained a discharge capacity of 628mA h g^(-1) even at a rate of 2 C,which was significantly higher than that of a pristine sulfur electrode(206mA h g^(-1)).These findings provide a prospective strategy for designing cathode materials for high-performance LSBs.展开更多
It was revealed that an average energy of special boundaries is proportional to APB energy in the alloys with the L12 superstructure. This fact proves the appearance of the GAPBs in the planes of location of special b...It was revealed that an average energy of special boundaries is proportional to APB energy in the alloys with the L12 superstructure. This fact proves the appearance of the GAPBs in the planes of location of special boundaries in coincidence sites of ordered alloys. It was determined that the more energy of special boundaries in ordered alloys, the more energy of complex stacking fault. There is a correlation between the distribution of special boundaries as a function its relative energy and ordering energy: the more ordering energy, the more degree of washed away of distribution. The correlation between average relative energy of special boundaries and ordering energy was detected: the more ordering energy, the more average energy of special boundaries. The reverse dependence between ordering energy and average number of special boundaries in grains limited by boundaries of general type was discovered.展开更多
We measured the resonant Raman spectra of all-trans-β-carotene in solvents with different densities and concentrations at different temperatures. The results demonstrated that the Raman scattering cross section （RSC...We measured the resonant Raman spectra of all-trans-β-carotene in solvents with different densities and concentrations at different temperatures. The results demonstrated that the Raman scattering cross section （RSCS） of short-chain polymer all-trans-β-carotene is extremely high in liquid. Resonance and strong coherent weakly damped CC bond vibrating properties play important roles under these conditions. Coherent weakly damped CC bond vibration strength is associated with molecular ordered structure. All-trans-β-carotene has highly ordered structure and strong coherent weakly damped CC bond vibrating properties, which lead to large RSCS in the solvent with large density and low concentration at low temperature.展开更多
The short-range order structures of Fe_xGe_(1-x) amorphous thin films,(x=8.7,19.1 and 28.5%)have been studied by means of X-ray absorption spectrum.The nearest neighbors around a Ge or an Fe atom are constituted by tw...The short-range order structures of Fe_xGe_(1-x) amorphous thin films,(x=8.7,19.1 and 28.5%)have been studied by means of X-ray absorption spectrum.The nearest neighbors around a Ge or an Fe atom are constituted by two coordinate sub-shells with a very short dis- tance,In two films with lower Fe content,structural parameters of the nearest neighbors around a Ge atom are very near to that in amorphous germanium,and the positions of Fe at- oms are randomly substitutional.But when x=28.5%,some great changes occur on the short-range order structure of a-Fe_xGe_(1-x) film:its structure deviates from continuous ran- dora network and tends toward dense random packing of atoms.Meanwhile,there is a strong- er interaction between near neighboring Fe-Ge atoms in a-Fe_xGe_(1-x) films.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52072127,52201297,U21A2055,and U22A20160)the China Postdoctoral Science Foundation(No.2022M711200)the Royal Society(No.IEC/NSFC/191344)(UK).
文摘Mimicking the electric microenvironment of natural tissue is a promising strategy for developing biomedical implants. However, current research has not taken biomimetic electrical functional units into consideration when designing biomedical implants. In this research, ordered structures with Schottky heterojunction functional unit (OSSH) were constructed on titanium implant surfaces for bone regeneration regulation. The Schottky heterojunction functional unit is composed of periodically distributed titanium microdomain and titanium oxide microdomain with different carrier densities and surface potentials. The OSSH regulates the M2-type polarization of macrophages to a regenerative immune response by activating the PI3K-AKT-mTOR signal pathway and further promotes osteogenic differentiation of rat bone marrow mesenchymal stem cells. This work provides fundamental insights into the biological effects driven by the Schottky heterojunction functional units that can electrically modulate osteogenesis.
基金supported by the National Key Research and Development Program of China(No.2024YFE0100600)the National Natural Science Foundation of China(No.52373303)+1 种基金the Shanghai Municipal Science and Technology Major Project(No.2021SHZDZX0100)the Fundamental Research Funds for the Central Universities and the Interdisciplinary Joint Research and Development Project of Tongji University(No.2022-4-ZD-01).
文摘Weak interactions prevent the magnetic particles from achieving excellent electromagnetic wave absorp-tion(EMA)at a low filler loading(FL).The construction of one-dimensional magnetic metal fibers(1D-MMFs)contributes to the formation of an electromagnetic(EM)coupling network,enhancing EM properties at a low FL.However,precisely controlling the length of 1D-MMFs to regulate permittivity at low FL poses a challenge.Herein,a novel magnetic field-assisted growth strategy was used to fabricate Co-based fibers with adjustable permittivity and aspect ratios.With a variety of FL changes,centimeter-level Co long fibers(Co-lf)consistently exhibited higher permittivity than Co particles and Co short fibers due to the enhancement of the effective EM coupling.The Co-lf exhibits excellent EMA performance(-54.85 dB,5.8 GHz)at 10 wt.%FL.Meanwhile,heterogeneous interfaces were introduced to increase the interfacial polarization through a fine phosphorylation design,resulting in elevated EMA performances(-51.50 dB,6.6 GHz)at 10 wt.%FL for Co_(2)P/Co long fibers.This study improves the orderliness of the particle arrangement by regulating the length of 1D-MMFs,which affects the behavior of electrons inside the fibers,providing a new perspective for improving the EMA properties of magnetic materials at a low FL.
基金Project (2009CB623704) supported by the National Basic Research Program of ChinaProject (50971076) supported by the National Natural Science Foundation of China
文摘14H, 18R and 24R long-period stacking ordered （LPSO） structures were observed in the as-cast Mg-3Cu-1Mn-2Zn-1Y damping alloy using transmission electron microscopy （TEM）. These LPSO structures contained Mg, Y, Cu and Zn and thus they were quaternary phases. Sharp diffraction pattern of the 24R structure was obtained and the angle between and g10024R was measured to be 5.03°. During high resolution TEM observations, lattice fringes with two characteristic spacings were observed within the 24R structure. Based on the experimental results, 6H, 7H and three 8H are suggested as the building blocks of 18R, 14H and 24R structures, respectively. The 24R unit cell can be interpreted as the stacking of 8H building blocks in the same shear direction with a shear angle of about 5.03°. The imperfect 24R structures are in order or disorder arrangements of principal 8H and minor 6H blocks. This double-block structure model is also applicable to other reported defects in LPSO structures.
基金support of the National Natural Science Foundation of China (No.50571073)the Ph.D. Programs Foundation of Ministry of Education of China (No. 20111402110004)the Natural Science Foundation of Shanxi Province, China (No.2009011028-3)
文摘Mg-Zn-Y alloys with long-period stacking ordered structures were prepared by an ingot casting method. The corrosion performance of Mg-Zn-Y alloys was studied by combining gas-collecting test, immersion test and electrochemical measurements in order to determine the corrosion rate and mechanism of the alloys. The results showed that the volume fraction of Mg（12）YZn phase increased and the shape of the Mg（12）YZn phase changed from discontinuous to continuous net-like with increasing Zn and Y content. The corrosion rate of the alloys greatly depended on the distribution and volume fraction of the Mg（12）YZn phase. Corrosion products appeared at the junction of Mg phase and Mg（12）YZn phase, indicating that the Mg（12）YZn phase accelerated galvanic corrosion of Mg matrix. Mg（97）Zn1Y2 alloy shows the lowest corrosion rate due to the continuous distribution of Mg（12）YZn phase.
基金Project (BK2010392) supported by the Natural Science Foundation of Jiangsu Province of ChinaProject (3212000502) supported by the Innovation Foundation of Southeast University,China
文摘The microstructure and mechanical properties of Mg94Zn2Y4 extruded alloy containing long-period stacking ordered structures were systematically investigated by SEM and TEM analyses. The results show that the 18R-LPSO structure and α-Mg phase are observed in cast Mg94Zn2Y4 alloy. After extrusion, the LPSO structures are delaminated and Mg-slices with width of 50-200 nm are generated. By ageing at 498 K for 36 h, the ageing peak is attained andβ′phase is precipitated. Due to this novel precipitation, the microhardness ofα-Mg matrix increases apparently from HV108.9 to HV129.7. While the microhardness for LPSO structure is stabilized at about HV145. TEM observations and SAED patterns indicate that the β′ phase has unique orientation relationships betweenα-Mg and LPSO structures, the direction in the close-packed planes ofβ′precipitates perpendicular to that ofα-Mg and LPSO structures. The ultimate tensile strength for the peak-aged alloy achieves 410.7 MPa and the significant strength originates from the coexistence ofβ′precipitates and 18R-LPSO structures.
基金The authors are grateful of the financial support by the National Natural Science Foundation of China(51902083 and 21606068)the Foundation Strengthening Program(2019-JCJQ-142-00)the Higher Education Science and Technology Research Project of Hebei Province(ZD2019087).
文摘Currently,electromagnetic radiation and interference have a significant effect on the operation of electronic devices and human health systems.Thus,developing excellent microwave absorbers have a huge significance in the material research field.Herein,a kind of ultrafine zinc oxide(ZnO)nanoparticles(NPs)supported on three-dimensional(3D)ordered mesoporous carbon spheres(ZnO/OMCS)is prepared from silica inverse opal by using phenolic resol precursor as carbon source.The prepared lightweight ZnO/OMCS nanocomposites exhibit 3D ordered carbon sphere array and highly dispersed ultrafine ZnO NPs on the mesoporous cell walls of carbon spheres.ZnO/OMCS-30 shows microwave absorbing ability with a strong absorption(−39.3 dB at 10.4 GHz with a small thickness of 2 mm)and a broad effective absorption bandwidth(9.1 GHz).The outstanding microwave absorbing ability benefits to the well-dispersed ultrafine ZnO NPs and the 3D ordered mesoporous carbon spheres structure.This work opened up a unique way for developing lightweight and high-efficient carbon-based microwave absorbing materials.
基金supported by NSFC(21073235,21173270,21177160,21376261)863 Program(2013AA065302)PetroChina Innovation Foundation(2011D-5006-0403)
文摘Highly ordered mesoporous NiMoO4 material was successfully synthesized using mesoporous silica KIT-6 as hard template via vacuum nanocasting method. The structure was characterized by means of XRD, TEM, N2 adsorption-desorption, Raman and FT-IR. The mesoporous NiMoO4 with the coexistence of a-NiMoO4 and fl-NiMoO4 showed well-ordered mesoporous structure, a bimodal pore size distribution and crystalline framework. The catalytic performance of NiMoOa was investigated for oxidative dehydrogenation of propane. It is demonstrated that the mesoporous NiMoO4 catalyst with more surface active oxygen species showed better catalytic performance in oxidative dehydrogena- tion of propane in comparison with bulk NiMoO4.
基金University of Macao,Grant/Award Numbers:MYRG2018-00192-IAPME,MYRG2020-00187-IAPMEScience and Technology Development Fund,Macao SAR,Grant/Award Numbers:0021/2019/AIR,0041/2019/A1,0046/2019/AFJ,0191/2017/A3UEA funding。
文摘Simultaneously enhancing the reaction kinetics,mass transport,and gas release during alkaline hydrogen evolution reaction(HER)is critical to minimizing the reaction polarization resistance,but remains a big challenge.Through rational design of a hierarchical multiheterogeneous three-dimensionally(3D)ordered macroporous Mo_(2)C-embedded nitrogen-doped carbon with ultrafine Ru nanoclusters anchored on its surface(OMS Mo_(2)C/NC-Ru),we realize both electronic and morphologic engineering of the catalyst to maximize the electrocatalysis performance.The formed Ru-NC heterostructure shows regulative electronic states and optimized adsorption energy with the intermediate H*,and the Mo_(2)C-NC heterostructure accelerates the Volmer reaction due to the strong water dissociation ability as confirmed by theoretical calculations.Consequently,superior HER activity in alkaline solution with an extremely low overpotential of 15.5 mV at 10 mAcm^(−2)with the mass activity more than 17 times higher than that of the benchmark Pt/C,an ultrasmall Tafel slope of 22.7 mV dec−1,and excellent electrocatalytic durability were achieved,attributing to the enhanced mass transport and favorable gas release process endowed from the unique OMS Mo_(2)C/NC-Ru structure.By oxidizing OMS Mo_(2)C/NC-Ru into OMS MoO_(3)-RuO_(2)catalyst,it can also be applied as efficient oxygen evolution electrocatalyst,enabling the construction of a quasi-symmetric electrolyzer for overall water splitting.Such a device's performance surpassed the state-of-the-art Pt/C||RuO2 electrolyzer.This study provides instructive guidance for designing 3D-ordered macroporous multicomponent catalysts for efficient catalytic applications.
基金supported by National Natural Science Fundation of China (Nos. 51171192 and51271183)National Basic Research Program of China(No. 2013CB632205)Innovation Fund of Institute of Metal Research (IMR), Chinese Academy of Sciences(CAS)
文摘Both the solid solution and precipitation are mainly strengthening mechanism for the magnesium-based alloys. A great number of alloying elements can be dissolved into the Mg matrix to form the solutes and precipitates.Moreover, the type of precipitates varies with different alloying elements and heat treatments, which makes it quite difficult to understand the formation mechanism of the precipitates in Mg-based alloys in depth. Thus, it is very hard to give a systematical regularity in precipitation process for the Mg-based alloys. This review is mainly focused on the formation and microstructural evolution of the precipitates, as a hot topic for the past few years, including Guinier-Preston Zones, quasicrystals and long-period stacking ordered phases formed in a number of Mg-TM-RE alloy systems, where TM = Al, Zn, Zr and RE = Y,Gd, Hd, Ce and La.
基金financially supported by the National Natural Science Foundation of China (Nos. 21674019, 21704014, 52003106, 22008086, and 52003107)China Postdoctoral Science Foundation (Nos. 2020M671332, 2021M691265, and 2021M691266)+2 种基金Fundamental Research Funds for the Central Universities (Nos. 2232019A3-03 and JUSRP12032)Ministry of Education of the People’s Republic of China (No. 6141A0202202)Shanghai Scientific and Technological Innovation Project (No. 18JC1410600)。
文摘The development of high-performance microwave absorption materials with strong absorption capacity and broad bandwidth is highly desirable in the field of electromagnetic pollution protection.Herein,ultralight polyimide-based graphene foam with ordered lamellar structure is precisely designed and controllably constructed by bidirectional freezing process.More lamellar interfaces formed inside the foam per unit volume effectively facilitate the layer-by-layer dissipation for the vertical incident electromagnetic waves,thereby endowing the foam with efficient broadband electromagnetic absorption performance.More importantly,electromagnetic absorption performance can be controllably adjusted by optimizing impedance distribution and microstructure of skeletons.As a result,the optimized foam with an ultralow density of 9.10 mg/cm^(3)presents a minimum reflection loss value of-61.29 dB at 9.25 GHz and an effective absorption bandwidth of 5.51 GHz(7.06-12.57 GHz,covering the whole X band) when the thickness is 4.75 mm.
基金supported by the National Natural Science Foundation of Tianjin(No.20JCQNJC01280)the National Natural Science Foundation of China(No.21905201)+1 种基金the support of the scientifi c research project from China Three Gorges Corporation(No.202103406)supported by Tohoku University and JSPS KAKENHI(No.JP16J06828).
文摘Sodium-ion hybrid capacitor(SIHC)is one of the most promising alternatives for large-scale energy storage due to its high energy and power densities,natural abundance,and low cost.However,overcoming the imbalance between slow Na^(+)reaction kinetics of battery-type anodes and rapid ion adsorption/desorption of capacitive cathodes is a significant challenge.Here,we propose the high-rate-performance NiS_(2)@OMGC anode material composed of monodispersed NiS_(2) nanocrystals(8.8±1.7 nm in size)and N,S-co-doped graphenic carbon(GC).The NiS_(2)@OMGC material has a three-dimensionally ordered macroporous(3DOM)morphology,and numerous NiS_(2) nanocrystals are uniformly embedded in GC,forming a core-shell structure in the local area.Ultrafine NiS_(2) nanocrystals and their nano-microstructure demonstrate high pseudocapacitive Na-storage capability and thus excellent rate performance(355.7 mAh/g at 20.0 A/g).A SIHC device fabricated using NiS_(2)@OMGC and commercial activated carbon(AC)cathode exhibits ultrahigh energy densities(197.4 Wh/kg at 398.8 W/kg)and power densities(43.9 kW/kg at 41.3 Wh/kg),together with a long life span.This outcome exemplifies the rational architecture and composition design of this type of anode material.This strategy can be extended to the design and synthesis of a wide range of high-performance electrode materials for energy storage applications.
基金the financial support of the project from the Natural Science Foundation of Jiangsu Province of China(No.BK2010392)the Innovation Foundation of Southeast University(No.3212000502)the Opening Project of Jiangsu Key Laboratory of Advanced Materials
文摘Microstructures and precipitation behaviours of Mg94Y4Zn2 （at. %） extruded alloy during solution treatment and ageing processes were investigated. Three major phases were observed in the as-cast Ug94Zn2Y4 alloy：α-Mg, block shaped 1 8R long period stacking ordered （LPSO） phase and Mg24Y5 cuboid particles. After homogenization and extrusion, the block shaped LPSO phase changed into plate-like shape aligned along the direction of extrusion. During solution treatment, a small fraction of LPSO phase was transformed from 18R structure to 14H type. The nano-scale β＇ phase with its close-packed planes being perpendicular to the direction of both α-Mg and LPSO structure was precipitated at ageing stage. The coexistence of β＇ and LPSO phase contributes to the strengthening of the alloy, with microhardness for the matrix and LPSO structures reaching 145.8 and 155,0 HV, respectively.
基金Projects(51871195,51501015)supported by the National Natural Science Foundation of ChinaProject(TC170A5SU-1)supported by Ministry of Industry and Information Technology of China。
文摘The morphology and crystal structure of the precipitates in Mg-7Gd-3Y-1Nd-1Zn-0.5Zr(wt.%)alloy with fine plate-like 14H-LPSO structures aged at 240℃were investigated using transmission electron microscopy(TEM)and high-angle annular dark-field scanning transmission electron microscopy(HAADF-STEM).Fine plate-like 14H-LPSO structures precipitate after heat treatment at 500℃for 2 h,andβ-type phases precipitate after the alloy is aged at 240℃.The long-period atomic stacking sequence of 14H-LPSO structures along the[0001]αdirection is ABABCACACACBABA.After being aged at 240℃for 2 h,theβ-type phases are the ordered solution clusters,zig-zag GP zones,and a small number ofβ′phases.The peak hardness is obtained at 240℃for 18 h with a Brinell hardness of 112,theβ-type phases areβ’phases and local RE-rich structures.After being aged at 240℃for 100 h,theβ-type phases areβ’,β1 andβ’F phases.β′phases nucleate from the zig-zag GP zones directly withoutβ″phases,and then transform intoβ1 phase byβ’→β’F→β1 transformations.The Zn not only can form LPSO structure,but also is the constituent element ofβ1 phases.LPSO structures have a certain hindrance to the coarsening ofβ’andβ1 along<0001>α.
基金supported by funding from the National Natural Science Foundation of China(No.52277028,51577154,U1903133)
文摘Traditional heat conductive epoxy composites often fall short in meeting the escalating heat dissipation demands of large-power,high-frequency,and highvoltage insulating packaging applications,due to the challenge of achieving high thermal conductivity(k),desirable dielectric performance,and robust thermomechanical properties simultaneously.Liquid crystal epoxy(LCE)emerges as a unique epoxy,exhibiting inherently high k achieved through the self-assembly of mesogenic units into ordered structures.This characteristic enables liquid crystal epoxy to retain all the beneficial physical properties of pristine epoxy,while demonstrating a prominently enhanced k.As such,liquid crystal epoxy materials represent a promising solution for thermal management,with potential to tackle the critical issues and technical bottlenecks impeding the increasing miniaturization of microelectronic devices and electrical equipment.This article provides a comprehensive review on recent advances in liquid crystal epoxy,emphasizing the correlation between liquid crystal epoxy’s microscopic arrangement,organized mesoscopic domain,k,and relevant physical properties.The impacts of LC units and curing agents on the development of ordered structure are discussed,alongside the consequent effects on the k,dielectric,thermal,and other properties.External processing factors such as temperature and pressure and their influence on the formation and organization of structured domains are also evaluated.Finally,potential applications that could benefit from the emergence of liquid crystal epoxy are reviewed.
基金The authors gratefully acknowledge the financial support from the National Natural Science Foundation of China(Nos.12072212 and 11832007)the National Key Research and Development Program of China(No.2018YFE0307104)the Applied Basic Research Programs of Sichuan Province(No.2021YJ0071).We also highly appreciate the help of Dr.Yan Li from the Department of Mechanics,Sichuan University.
文摘Magnesium alloys with a long-period stacking ordered(LPSO)structure usually possess excellent static strength,but their fatigue behaviors are poorly understood.This work presents the effect of the LPSO structure on the crack behaviors of Mg alloys in a very high cycle fatigue(VHCF)regime.The LPSO lamellas lead to a facet-like cracking process along the basal planes at the crack initiation site and strongly prohibit the early crack propagation by deflecting the growth direction.The stress intensity factor at the periphery of the faceted area is much higher than the conventional LPSO-free Mg alloys,contributing higher fatigue crack propagation threshold of LPSO-containing Mg alloys.Microstructure observation at the facets reveals a layer of ultrafine grains at the fracture surface due to the cyclic contact of the crack surface,which supports the numerous cyclic pressing model describing the VHCF crack initiation behavior.
基金supported by the National Natural Science Foundation of China(Grant No.51801214 and 51871222)。
文摘Formation of β’ phase in long-period stacking ordered(LPSO) structures in an Mg;Co;Y;(at.%) alloy after aging at 200 °C for 24 h or electron beam(EB) irradiation has been studied by high-angle annular dark-field scanning transmission electron microscopy(HAADFSTEM). β’ phase was precipitated only in the Mg matrix but not in LPSO structures after aging at 200 °C for 24 h. LPSO structure containing stacking defects transforms into the β’-long phase during EB irradiation, which plays a key role in accelerating solute atoms’ diffusion. New complex β’(LPSO) structures formed in the alloy after EB irradiation, such as β’(12 H) structure with an orthorhombic lattice(Mg;Y, Cmcm,a = 2 _(a0)= 0.642 nm, b=4√3_(a0), c = 6 _(c0)= 3.12 nm).
基金Ministry of Trade,Industry and Energy,Grant/Award Number:20010095Korea Evaluation Institute of Industrial Technology,Grant/Award Number:20012341。
文摘Lithium-sulfur batteries(LSBs)have drawn significant attention owing to their high theoretical discharge capacity and energy density.However,the dissolution of long-chain polysulfides into the electrolyte during the charge and discharge process(“shuttle effect”)results in fast capacity fading and inferior electrochemical performance.In this study,Mn_(2)O_(3)with an ordered mesoporous structure(OM-Mn_(2)O_(3))was designed as a cathode host for LSBs via KIT-6 hard templating,to effectively inhibit the polysulfide shuttle effect.OM-Mn_(2)O_(3)offers numerous pores to confine sulfur and tightly anchor the dissolved polysulfides through the combined effects of strong polar-polar interactions,polysulfides,and sulfur chain catenation.The OM-Mn_(2)O_(3)/S composite electrode delivered a discharge capacity of 561 mAh g^(-1) after 250 cycles at 0.5 C owing to the excellent performance of OM-Mn_(2)O_(3).Furthermore,it retained a discharge capacity of 628mA h g^(-1) even at a rate of 2 C,which was significantly higher than that of a pristine sulfur electrode(206mA h g^(-1)).These findings provide a prospective strategy for designing cathode materials for high-performance LSBs.
基金B.V.Konovalova., N.A. Koneva and E.V.Kozlov acknowledge the INTAS for the partial support of this research under INTAS97-319
文摘It was revealed that an average energy of special boundaries is proportional to APB energy in the alloys with the L12 superstructure. This fact proves the appearance of the GAPBs in the planes of location of special boundaries in coincidence sites of ordered alloys. It was determined that the more energy of special boundaries in ordered alloys, the more energy of complex stacking fault. There is a correlation between the distribution of special boundaries as a function its relative energy and ordering energy: the more ordering energy, the more degree of washed away of distribution. The correlation between average relative energy of special boundaries and ordering energy was detected: the more ordering energy, the more average energy of special boundaries. The reverse dependence between ordering energy and average number of special boundaries in grains limited by boundaries of general type was discovered.
基金supported by the National Natural Science Foundation of China (Grant Nos. 10774057 and 10974067)the Graduate Innovation Fund of Jilin University,China (Grant No. 20101046)
文摘We measured the resonant Raman spectra of all-trans-β-carotene in solvents with different densities and concentrations at different temperatures. The results demonstrated that the Raman scattering cross section （RSCS） of short-chain polymer all-trans-β-carotene is extremely high in liquid. Resonance and strong coherent weakly damped CC bond vibrating properties play important roles under these conditions. Coherent weakly damped CC bond vibration strength is associated with molecular ordered structure. All-trans-β-carotene has highly ordered structure and strong coherent weakly damped CC bond vibrating properties, which lead to large RSCS in the solvent with large density and low concentration at low temperature.
文摘The short-range order structures of Fe_xGe_(1-x) amorphous thin films,(x=8.7,19.1 and 28.5%)have been studied by means of X-ray absorption spectrum.The nearest neighbors around a Ge or an Fe atom are constituted by two coordinate sub-shells with a very short dis- tance,In two films with lower Fe content,structural parameters of the nearest neighbors around a Ge atom are very near to that in amorphous germanium,and the positions of Fe at- oms are randomly substitutional.But when x=28.5%,some great changes occur on the short-range order structure of a-Fe_xGe_(1-x) film:its structure deviates from continuous ran- dora network and tends toward dense random packing of atoms.Meanwhile,there is a strong- er interaction between near neighboring Fe-Ge atoms in a-Fe_xGe_(1-x) films.
