Excessive nitrogen（N） fertilization in intensive agricultural areas such as the plain region of South China has resulted in low nitrogen use efficiency and serious environmental problems. To determine the optimum N ...Excessive nitrogen（N） fertilization in intensive agricultural areas such as the plain region of South China has resulted in low nitrogen use efficiency and serious environmental problems. To determine the optimum N application rate, grain yield, apparent nitrogen recovery efficiency（ANRE）, apparent N loss, and ammonium（NH_3） volatilization under different N application rates in the three years from 2012 to 2014 were studied. The results showed that the relationship between grain yields and N application rate in the three years were well fitted by quadratic equations. When N application rate reached 197 kg ha^（–1） in 2012, 199 kg ha^（–1） in 2013 and 196 kg ha^（–1） in 2014, the plateau of the grain yields appeared. With the increase of N application rate, the ANRE for rice decreased which could be expressed with sigmoidal equation; when N application rate was 305 kg ha^（–1） in 2012, 275 kg ha^（–1） in 2013 and 312 kg ha^（–1） in 2014, the curves of ANRE appeared turing points. Besides, the relationship between soil Nresidual and N application rate was fitted by the quadratic equation and the maximums of soil Nresidual were reached in the three years with the N application rate of 206, 244 and 170 kg ha^（–1）, respectively. Statistical analysis indicated that NH3 volatilization and apparent N loss in three years all increased with the increasing N application rate. When the amount of NH3 volatilization increased to 11.6 kg N ha^（–1） in 2012, 40.5 kg N ha^（–1） in 2013 and 57.0 kg N ha^（–1）in 2014, the apparent N loss in the three years had obvious increase. To determine the optimum N application rate, the average N application on the plateau of the grain yield was considered as the lower limit while the average N application rate at the turning points of ANRE, the residual N in soil and apparent N loss was taken as the upper limit. According to the results in three years, the optimum N application rate for rice in Zhejiang was 197–255 kg ha^（–1）.展开更多
In an effort to find suitable wood from natural forest to meet the demand for veneer products, the yield and tensile strength of veneers produced from Brachystegia nigerica were investigated. Two trees of B. nigerica ...In an effort to find suitable wood from natural forest to meet the demand for veneer products, the yield and tensile strength of veneers produced from Brachystegia nigerica were investigated. Two trees of B. nigerica were separately selected from 10 different natural forest zones while two logs were obtained from each tree. The logs were debarked and steamed in a vat prior to rotary peeling and slicing for veneer production. The optimum steam temperature was determined by considering different temperatures： 50℃, 60℃, 70℃, 80℃ and 90℃ for 24 h. Thereafter, optimum steam time was determined at the optimum temperature by considering durations of 24, 48, 72 and 96 h. The average taper of 0.75 mm per 1.0 m length was recorded for B. nigerica, indicating that the logs were reasonably cylindrical; thereby its logs are good for the production of veneer. The yield ranged from 44% to 61% with an average of 52% of the log input. The tensile strength of the veneer was tested perpendicular to grain and both peeled and sliced veneers had the highest tensile strength between 70℃ and 90℃, suggesting that softening of wood polymers, especially lignin, is between 70℃ and 90℃. The optimum temperature and time for veneer production are 70℃ and 48 h, respectively. Commercial production of veneer from B. nigerica is feasible based on the yield and mechanical properties of the obtained veneer, thereby encouraging the expansion of the scope of its utilization.展开更多
In order to study selection indices for improving rice grain yield, a cross was made between an Iranian traditional rice (Oryza sativa L.) variety, Tarommahalli and an improved indica rice variety, Khazar in 2006. The...In order to study selection indices for improving rice grain yield, a cross was made between an Iranian traditional rice (Oryza sativa L.) variety, Tarommahalli and an improved indica rice variety, Khazar in 2006. The traits of the parents (30 plants), F1 (30 plants) and F2 generations (492 individuals) were evaluated at the Rice Research Institute of Iran (RRII) during 2007. Heritabilities of the number of panicles per plant, plant height, days to heading and panicle exsertion were greater than that of grain yield. The selection indices were developed using the results of multivariate analysis. To evaluate selection strategies to maximize grain yield, 14 selection indices were calculated based on two methods (optimum and base) and combinations of 12 traits with various economic weights. Results of selection indices showed that selection for grain weight, number of panicles per plant and panicle length by using their phenotypic and/or genotypic direct effects (path coefficient) as economic weights should serve as an effective selection criterion for using either the optimum or base index.展开更多
基金supported by the National Natural Science Foundation of China(41501238)the Key Technologies R&D Program of China during the 12th Five-Year Plan period(2015BAD23B03)the Special Fund for Agro-scientific Research in the Public Interest from the Ministry of Agriculture,China(201003014-02-08)
文摘Excessive nitrogen（N） fertilization in intensive agricultural areas such as the plain region of South China has resulted in low nitrogen use efficiency and serious environmental problems. To determine the optimum N application rate, grain yield, apparent nitrogen recovery efficiency（ANRE）, apparent N loss, and ammonium（NH_3） volatilization under different N application rates in the three years from 2012 to 2014 were studied. The results showed that the relationship between grain yields and N application rate in the three years were well fitted by quadratic equations. When N application rate reached 197 kg ha^（–1） in 2012, 199 kg ha^（–1） in 2013 and 196 kg ha^（–1） in 2014, the plateau of the grain yields appeared. With the increase of N application rate, the ANRE for rice decreased which could be expressed with sigmoidal equation; when N application rate was 305 kg ha^（–1） in 2012, 275 kg ha^（–1） in 2013 and 312 kg ha^（–1） in 2014, the curves of ANRE appeared turing points. Besides, the relationship between soil Nresidual and N application rate was fitted by the quadratic equation and the maximums of soil Nresidual were reached in the three years with the N application rate of 206, 244 and 170 kg ha^（–1）, respectively. Statistical analysis indicated that NH3 volatilization and apparent N loss in three years all increased with the increasing N application rate. When the amount of NH3 volatilization increased to 11.6 kg N ha^（–1） in 2012, 40.5 kg N ha^（–1） in 2013 and 57.0 kg N ha^（–1）in 2014, the apparent N loss in the three years had obvious increase. To determine the optimum N application rate, the average N application on the plateau of the grain yield was considered as the lower limit while the average N application rate at the turning points of ANRE, the residual N in soil and apparent N loss was taken as the upper limit. According to the results in three years, the optimum N application rate for rice in Zhejiang was 197–255 kg ha^（–1）.
文摘In an effort to find suitable wood from natural forest to meet the demand for veneer products, the yield and tensile strength of veneers produced from Brachystegia nigerica were investigated. Two trees of B. nigerica were separately selected from 10 different natural forest zones while two logs were obtained from each tree. The logs were debarked and steamed in a vat prior to rotary peeling and slicing for veneer production. The optimum steam temperature was determined by considering different temperatures： 50℃, 60℃, 70℃, 80℃ and 90℃ for 24 h. Thereafter, optimum steam time was determined at the optimum temperature by considering durations of 24, 48, 72 and 96 h. The average taper of 0.75 mm per 1.0 m length was recorded for B. nigerica, indicating that the logs were reasonably cylindrical; thereby its logs are good for the production of veneer. The yield ranged from 44% to 61% with an average of 52% of the log input. The tensile strength of the veneer was tested perpendicular to grain and both peeled and sliced veneers had the highest tensile strength between 70℃ and 90℃, suggesting that softening of wood polymers, especially lignin, is between 70℃ and 90℃. The optimum temperature and time for veneer production are 70℃ and 48 h, respectively. Commercial production of veneer from B. nigerica is feasible based on the yield and mechanical properties of the obtained veneer, thereby encouraging the expansion of the scope of its utilization.
文摘In order to study selection indices for improving rice grain yield, a cross was made between an Iranian traditional rice (Oryza sativa L.) variety, Tarommahalli and an improved indica rice variety, Khazar in 2006. The traits of the parents (30 plants), F1 (30 plants) and F2 generations (492 individuals) were evaluated at the Rice Research Institute of Iran (RRII) during 2007. Heritabilities of the number of panicles per plant, plant height, days to heading and panicle exsertion were greater than that of grain yield. The selection indices were developed using the results of multivariate analysis. To evaluate selection strategies to maximize grain yield, 14 selection indices were calculated based on two methods (optimum and base) and combinations of 12 traits with various economic weights. Results of selection indices showed that selection for grain weight, number of panicles per plant and panicle length by using their phenotypic and/or genotypic direct effects (path coefficient) as economic weights should serve as an effective selection criterion for using either the optimum or base index.
