Based on reliability theory,a general method for the optimization design of piles subjected to horizontal loads is presented.This method takes into consideration various uncertainties caused by pile installation,varia...Based on reliability theory,a general method for the optimization design of piles subjected to horizontal loads is presented.This method takes into consideration various uncertainties caused by pile installation,variability of geotechnical materials from one location to another,and so on.It also deals with behavior and side constraints specified by standard specifications for piles.To more accurately solve the optimization design model,the first order reliability method is employed.The results from the numerical example indicate that the target reliability index has significant influence on design parameters.In addition,the optimization weight increases with the target reliability index.Especially when the target reliability index is relatively large,the target reliability index has significant influence on design weight of piles.展开更多
We proposed and demonstrated the ultra-compact 1310/1550 nm wavelength multiplexer/demultiplexer assisted by subwavelength grating(SWG)using particle swarm optimization(PSO)algorithm in silicon-on-insulator(SOI)platfo...We proposed and demonstrated the ultra-compact 1310/1550 nm wavelength multiplexer/demultiplexer assisted by subwavelength grating(SWG)using particle swarm optimization(PSO)algorithm in silicon-on-insulator(SOI)platform.Through the self-imaging effect of multimode interference(MMI)coupler,the demultiplexing function for 1310 nm and 1550 nm wavelengths is implemented.After that,three parallel SWG-based slots are inserted into the MMI section so that the effective refractive index of the modes can be engineered and thus the beat length can be adjusted.Importantly,these three SWG slots significantly reduce the length of the device,which is much shorter than the length of traditional MMI-based wavelength demultiplexers.Ultimately,by using the PSO algorithm,the equivalent refractive index and width of the SWG in a certain range are optimized to achieve the best performance of the wavelength demultiplexer.It has been verified that the device footprint is only 2×30.68μm^(2),and 1 dB bandwidths of larger than 120 nm are acquired at 1310 nm and 1550 nm wavelengths.Meanwhile,the transmitted spectrum shows that the insertion loss(IL)values are below 0.47 dB at both wavelengths when the extinction ratio(ER)values are above 12.65 dB.This inverse design approach has been proved to be efficient in increasing bandwidth and reducing device length.展开更多
The concrete-steel platform structure is rather complicated because it involves such materials as concrete, reinforcing bars, steel, and so on. If the traditional dimension optimization method is employed, the optimal...The concrete-steel platform structure is rather complicated because it involves such materials as concrete, reinforcing bars, steel, and so on. If the traditional dimension optimization method is employed, the optimal design of the platform will meet many handicaps, even it cannot be implemented at all. The multilevel optimal design approach is an efficient tool for the solution of large-scale engineering structures. In this paper, this approach is applied to the optimal design of a concrete-steel platform, which is formulated as a system level optimal design problem and a set of uncoupled substructure level optimal design problems. The process of optimization is a process of iteration between system level and substructure level until the objective function converges. An illustrative example indicates that this method is effective in the optimal design of concrete-steel platforms.展开更多
At present, most calculation results regarding foundation pit dewatering are ideal values, making construction resources prone to being wasted. In order to optimize the traditional pipe well design of large wells, the...At present, most calculation results regarding foundation pit dewatering are ideal values, making construction resources prone to being wasted. In order to optimize the traditional pipe well design of large wells, the linear programming solution module in Excel is used, with the total water inflow taken as the objective function, the water level drawdown used as the constraint and test condition, and a station project on the Chengdu Metro Line 7 serving as the subject of this study. The total water inflow of the traditional pipe well design is optimized by the simplex method, producing a total water inflow of 4 040.65 m^3/d, which, compared with 4 829.79 m^3/d, the total water inflow calculated by means of the traditional design optimization method, engenders a reduction of roughly 16% per day. The feasibility of the optimization methodology is verified by the drawdown constraint, which reveals the decrease of construction costs and the diminution of the influence that the lowered groundwater level has on the surroundings of the metro station. Finally, references are provided as to optimizing the dewatering designs for other metro stations in similar engineering and hydrogeological conditions.展开更多
基金Project(51278216) supported by the National Natural Science Foundation of China
文摘Based on reliability theory,a general method for the optimization design of piles subjected to horizontal loads is presented.This method takes into consideration various uncertainties caused by pile installation,variability of geotechnical materials from one location to another,and so on.It also deals with behavior and side constraints specified by standard specifications for piles.To more accurately solve the optimization design model,the first order reliability method is employed.The results from the numerical example indicate that the target reliability index has significant influence on design parameters.In addition,the optimization weight increases with the target reliability index.Especially when the target reliability index is relatively large,the target reliability index has significant influence on design weight of piles.
基金supported by the National Natural Science Foundation of China(No.61505160)the Innovation Capability Support Program of Shaanxi(No.2018KJXX-042)+2 种基金the Natural Science Basic Research Program of Shaanxi(No.2019JM-084)the State Key Laboratory of Transient Optics and Photonics(No.SKLST202108)the Graduate Innovation and Practical Ability Training Project of Xi’an Shiyou University(No.YCS22213190)。
文摘We proposed and demonstrated the ultra-compact 1310/1550 nm wavelength multiplexer/demultiplexer assisted by subwavelength grating(SWG)using particle swarm optimization(PSO)algorithm in silicon-on-insulator(SOI)platform.Through the self-imaging effect of multimode interference(MMI)coupler,the demultiplexing function for 1310 nm and 1550 nm wavelengths is implemented.After that,three parallel SWG-based slots are inserted into the MMI section so that the effective refractive index of the modes can be engineered and thus the beat length can be adjusted.Importantly,these three SWG slots significantly reduce the length of the device,which is much shorter than the length of traditional MMI-based wavelength demultiplexers.Ultimately,by using the PSO algorithm,the equivalent refractive index and width of the SWG in a certain range are optimized to achieve the best performance of the wavelength demultiplexer.It has been verified that the device footprint is only 2×30.68μm^(2),and 1 dB bandwidths of larger than 120 nm are acquired at 1310 nm and 1550 nm wavelengths.Meanwhile,the transmitted spectrum shows that the insertion loss(IL)values are below 0.47 dB at both wavelengths when the extinction ratio(ER)values are above 12.65 dB.This inverse design approach has been proved to be efficient in increasing bandwidth and reducing device length.
基金This work was financially supported by the Natural Science Foundation of China(Grant No.59895410)
文摘The concrete-steel platform structure is rather complicated because it involves such materials as concrete, reinforcing bars, steel, and so on. If the traditional dimension optimization method is employed, the optimal design of the platform will meet many handicaps, even it cannot be implemented at all. The multilevel optimal design approach is an efficient tool for the solution of large-scale engineering structures. In this paper, this approach is applied to the optimal design of a concrete-steel platform, which is formulated as a system level optimal design problem and a set of uncoupled substructure level optimal design problems. The process of optimization is a process of iteration between system level and substructure level until the objective function converges. An illustrative example indicates that this method is effective in the optimal design of concrete-steel platforms.
基金supported by State Key Laboratory of Geohazard Prevention and Geoenvironment Protection Independent Research Project (SKLGP2018Z018)
文摘At present, most calculation results regarding foundation pit dewatering are ideal values, making construction resources prone to being wasted. In order to optimize the traditional pipe well design of large wells, the linear programming solution module in Excel is used, with the total water inflow taken as the objective function, the water level drawdown used as the constraint and test condition, and a station project on the Chengdu Metro Line 7 serving as the subject of this study. The total water inflow of the traditional pipe well design is optimized by the simplex method, producing a total water inflow of 4 040.65 m^3/d, which, compared with 4 829.79 m^3/d, the total water inflow calculated by means of the traditional design optimization method, engenders a reduction of roughly 16% per day. The feasibility of the optimization methodology is verified by the drawdown constraint, which reveals the decrease of construction costs and the diminution of the influence that the lowered groundwater level has on the surroundings of the metro station. Finally, references are provided as to optimizing the dewatering designs for other metro stations in similar engineering and hydrogeological conditions.
