The fatigue crack growth rate of a novel Ti-6Al-4V-1Mo titanium alloy,which is developed for laser directed energy deposition technique,was investigated before and after cyclic heat treatment(CHT).Changes in microstru...The fatigue crack growth rate of a novel Ti-6Al-4V-1Mo titanium alloy,which is developed for laser directed energy deposition technique,was investigated before and after cyclic heat treatment(CHT).Changes in microstructure,fracture surfaces,and crack growth paths were analyzed before and after CHT.Results indicate that in the stable crack growth region,the growth rates for the as-deposited and cyclic heat-treated specimens follow the relationships da/dN=1.8651×10^(−8)(ΔK)^(3.2271)and da/dN=1.4112×10^(−8)(ΔK)^(3.1125),respectively.Compared with that at the as-deposited state,the microstructure after CHT is transformed from a uniform basket-weave microstructure to a dual-phase microstructure consisting of near-sphericalαandβ-transformed matrix phases.The cyclic process also disrupts the continuity of the grain boundaryα(αGB)at the primaryβ-phase grain boundary.The coarsening of primaryαand the disruption ofαGB continuity are the primary factors to release stress concentration and promote crack deflection,thereby decreasing the fatigue crack growth rate.Additionally,the increased occurrence of crack branching,secondary cracking,and crack bridging in cyclic heat-treated specimens further reduces the crack driving force and slows the fatigue crack growth rate.展开更多
Early-stage gastric cancer;Extent of lymph node dissection;D1 dissection;D2 dissection;Recurrence rate;Survival rateObjective:To investigate the impact of different lymph node dissection scopes on postoperative recurr...Early-stage gastric cancer;Extent of lymph node dissection;D1 dissection;D2 dissection;Recurrence rate;Survival rateObjective:To investigate the impact of different lymph node dissection scopes on postoperative recurrence and survival rates in patients with early gastric cancer,providing evidence-based support for optimizing clinical surgical plans.Methods:A retrospective analysis was conducted on the clinical data of 100 patients with early gastric cancer who underwent surgical treatment at our hospital from October 2021 to October 2023.Patients were divided into Group D1(n=50)and Group D2(n=50)based on the extent of lymph node dissection.Group D1 underwent limited lymph node dissection(dissection of the first station of lymph nodes around the stomach),while Group D2 underwent standard lymph node dissection(dissection of the first and second stations of lymph nodes around the stomach).Surgical-related indicators,the incidence of postoperative complications,the 2-year recurrence rate,and the 2-year survival rate were compared between the two groups of patients.Results:The operative time,intraoperative blood loss,postoperative hospital stay,and the number of lymph nodes dissected were significantly higher in the D2 group than in the D1 group(all P<0.001).The overall incidence of postoperative complications was higher in the D1 group than in the D2 group,but the difference was not statistically significant(χ^(2)=0.884,P=0.766).After a 2-year follow-up,the recurrence rate was significantly higher in the D1 group than in the D2 group(χ^(2)=4.000,P=0.046).The 2-year survival rate was significantly lower in the D1 group than in the D2 group(χ^(2)=5.005,P=0.025).A total of 100 patients with early-stage gastric cancer were grouped according to the depth of invasion,degree of differentiation,and lymph node metastasis status,and the recurrence rates of different subgroups were compared.The results showed that the recurrence rate was higher in patients with T1b stage than in those with T1a stage(χ^(2)=5.005,P=0.025),higher in poorly differentiated patients than in moderately and well-differentiated patients(χ^(2)=4.155,P=0.042),and higher in patients with lymph node metastasis than in those without lymph node metastasis(χ^(2)=4.512,P=0.034).Conclusion:Compared with D1 limited lymph node dissection,D2 standard lymph node dissection can significantly reduce the postoperative recurrence rate and improve the 2-year survival rate in patients with early-stage gastric cancer without significantly increasing the risk of postoperative complications.Although the surgical trauma is slightly greater,the overall prognosis is better,making it a preferred surgical treatment option for patients with early-stage gastric cancer.展开更多
Apparel exports China:The decline in exports widened from January to September(-2.4%,compared to-0.2%in January-June).Exports to the EU increased(+5.9%),though the growth rate moderated.Exports to the US saw a larger ...Apparel exports China:The decline in exports widened from January to September(-2.4%,compared to-0.2%in January-June).Exports to the EU increased(+5.9%),though the growth rate moderated.Exports to the US saw a larger contraction(January-June:-1.6%,January-September:-8.2%).While exports to ASEAN countries still fell by over 10%(-17.7%),shipments to the Philippines(+6.9%),Indonesia(+19.0%),and Cambodia(+64.9%)demonstrated stronger growth performance within the year.Regarding tariffs,on October 30,China and the US agreed to lower the rates on goods subject to additional duties(effectively reducing the average tariff rate on Chinese imports to the US from about 57%to approximately 47%,though this remains significantly higher than the 19.5%overall average rate applied to other countries).展开更多
The high-alloyed wrought superalloy GH4975 tends to form coarse MC carbides and eutectic(γ+γ′)phases,which adversely affect the cogging and homogenization process.To provide theoretical guidance for control of MC c...The high-alloyed wrought superalloy GH4975 tends to form coarse MC carbides and eutectic(γ+γ′)phases,which adversely affect the cogging and homogenization process.To provide theoretical guidance for control of MC carbides and eutectic(γ+γ′)formation,differential thermal analysis(DTA)was utilized to investigate the effect of cooing rate(10-90℃·min^(-1))on solidification behavior and micro-segregation of GH4975 alloy.According to the thermodynamic calculation and distribution characteristics of precipitates,the MC carbides can act as nucleation sites forγdendrites,but the nucleation ofγdendrites becomes less dependent on the MC carbide primers at higher cooling rates.As theγdendrites grow,the elements including Ti and Nb gradually accumulate in the residual liquid and leads to the formation of more MC carbides near the interdendritic region.Finally,the solidification is terminated with the formation of eutectic(γ+γ′).With an increase in cooling rate,the liquidus temperature rises,but the solidus temperature decreases,and thus the solidification range is obviously enlarged.The dendritic structure is significantly refined by the increase of cooling rate.The secondary dendrite arm spacing,λ_(2),as a function of cooling rate,T,can be expressed asλ_(2)=216.78T^(-0.42).Moreover,the increasing cooling rate weakens the back diffusion of Al,Ti,and Nb,increases the undercooling,and limits the growth of precipitates.Consequently,the sizes of MC carbides,eutectic(γ+γ′),and primaryγ′significantly decrease,but the area fraction of eutectic(γ+γ′)linerly increases as the cooling rate rises.Thus moderate cooling rate(such as 30℃·min^(-1))should be selected during the solidification process of GH4975 alloy.展开更多
When a porous rock is subjected to overall compressive loading,either increasing pore pressure or decreasing confining pressure could result in rock failure.The stress path and the applied pressure change rate may aff...When a porous rock is subjected to overall compressive loading,either increasing pore pressure or decreasing confining pressure could result in rock failure.The stress path and the applied pressure change rate may affect the initiation and propagation of fractures within brittle materials.Understanding the physical mechanisms leading to failure is crucial for underground engineering applications and geo-energy exploration and storage.We conducted triaxial compression experiments on porous Bentheim sandstone samples at different stress paths and pressure change rates.First,at a constant confining pressure of 35 MPa and pore pressure of 5 MPa,intact cylindrical samples were axially loaded up to about 85%of the peak strength.Subsequently,the axial piston position was fixed,and then either the pore pressure was increased or the confining pressure was decreased at two different rates(0.5 MPa/min or 2 MPa/min),leading to final catastrophic failure.The mechanical results revealed that samples subjected to higher rates of decreasing effective confining pressure exhibited larger stress drop rates,higher slip rates,higher total breakdown work,higher rates of acoustic emissions(AEs)before failure,and higher post-failure AE decay rates.In contrast,the applied stress path did not significantly affect rock failure characteristics.Comparison of located AE events with post-mortem microstructures of deformed samples shows a good agreement.The AE source type determined from the P-wave first-motion polarity shows that shear failure dominated the fracture process when approaching failure.Gutenberg-Richter b-values revealed a significant decrease before failure in all tests.Our results indicate that,in contrast to the stress path,the rate of effective stress change strongly affects fracturing behavior and AE rate changes.展开更多
One of the key challenges for underground rock reservoirs is ensuring prevention of the unwanted fluid leakage through rock fracture networks during their service life.Microbial-induced calcium carbonate precipitation...One of the key challenges for underground rock reservoirs is ensuring prevention of the unwanted fluid leakage through rock fracture networks during their service life.Microbial-induced calcium carbonate precipitation(MICP)technology has emerged as a promising bio-healing method for rock fractures with small apertures.In this study,a new“three-stage”injection strategy-based MICP(TS-MICP)bio-healing method was proposed,aiming to achieve a“three-high”performance that includes high bridging rate,high mechanical strength,and high homogeneity.A series of meter-scale rock fracture models were prepared to conduct TS-MICP grouting tests.Compared with the traditional injection strategy-based biohealing methods,the TS-MICP method significantly improved the bridging rate(32.1%e89.5%),mechanical properties(0.138e1.023 MPa),and homogeneity of CaCO_(3)precipitation(334.4%).Additionally,it achieved a higher material utilization rate(1.72 times higher),reducing the consumption of cementation solution(CS)by 258.8%,thereby demonstrating greater potential for field applications.The underlying mechanism for achieving high bridging rate and high homogeneity in CaCO_(3)precipitation can be attributed to the synergistic effects of the coupling injection strategy,which optimizes the advantages at each stage.In stage I,under the influence of gravity,the rapid flocculation and hydrogen bonding interactions of organic matter lead to formation of the dense and high-strength CaCO_(3)precipitation at the bottom using a low-concentration bacterial suspension(BS).This process establishes bridging steps along the wall sides for subsequent uniform CaCO_(3)precipitation.In stage II,concentrated BS is utilized to produce looser CaCO_(3)flocculation,which precipitates uniformly on the pre-existing bridging steps.In stage III,a two-step injection strategy was employed to reinforce the loose CaCO_(3)crystals formed in stages I and II,and finally forms a strong bridging effect with“three-high”performance.展开更多
As a critical department ensuring the sterility of hospital instruments,the Sterile Supply Center(SSC)directly impacts the sterility status of clinical instruments through its sterilization qualification rate.Geriatri...As a critical department ensuring the sterility of hospital instruments,the Sterile Supply Center(SSC)directly impacts the sterility status of clinical instruments through its sterilization qualification rate.Geriatric patients,due to physiological decline and compromised immune function,constitute a high-risk group for hospital-acquired infections,with more stringent requirements for instrument sterility.This paper analyzes the current status and influencing factors of sterilization qualification rates in SSCs,explores the mechanistic association between sterilization qualification rates and infections in geriatric departments,and proposes targeted strategies to improve sterilization qualification rates.It highlights the pivotal role of SSC instrument sterilization in infection prevention and control for geriatric patients,providing theoretical basis and practical guidance for optimizing SSC management,reducing infection rates in geriatric departments,and ensuring the safety of elderly patients’medical care.These findings aim to enhance overall infection management standards in hospitals.展开更多
On January 19,2026,China's first structural interest rate cut of the year took effect.The People's Bank of China announced a 0.25 percentage point reduction in relending and rediscount rates,targeting key sect...On January 19,2026,China's first structural interest rate cut of the year took effect.The People's Bank of China announced a 0.25 percentage point reduction in relending and rediscount rates,targeting key sectors like small and micro enterprises(SMEs),technological innovation,and green transition.For the textile industry,where small and medium-sized enterprises account for over 90%of traditional manufacturing,the policy benefits will inject strong momentum into the high-quality development from multiple dimensions,including reduced financing costs,support for transformation funds,and expansion of foreign trade markets.展开更多
For the sake of saving energy and reducing emissions, this paper will introduce a design of oil-saving device for the simple cylinder 250 water-cooled petrol engine. The oil-saving device is based on the principle of ...For the sake of saving energy and reducing emissions, this paper will introduce a design of oil-saving device for the simple cylinder 250 water-cooled petrol engine. The oil-saving device is based on the principle of heat transfer and capture. By raising the heat of the oil mist up to 50℃, absorption and gathering the released gas from the opening valve, the engine can achieve fuel-saving purpose. The oil-saving device was made by 3D print technology. UG8.0 and ANSYS workbench were used in the design of device.展开更多
This study investigates extreme rainfall episodes along the eastern foothills of the Taihang Mountains in North China from 30 July to 1 August 2023.It focuses on two types of extreme hourly rainfall rates(HRRs),i.e.,t...This study investigates extreme rainfall episodes along the eastern foothills of the Taihang Mountains in North China from 30 July to 1 August 2023.It focuses on two types of extreme hourly rainfall rates(HRRs),i.e.,the maximum regionalaverage HRR and site-observed HRR,which exhibited sequential development over southern,middle,and northern key regions.These rainfall extremes occurred in an environment where a high-pressure barrier over North China prevented the intrusion of cold air masses from the north while a northward-moving typhoon remnant vortex and its associated low-level jet(LLJ)transported warm and moist airflow from the south.Two distinct echo evolution modes and convection initiation mechanisms are identified for the two types of extreme HRRs.The maximum regional-average HRR occurred when the LLJ arrived to the east of the key regions,while the maximum site-observed HRR occurred when the warmer vortex center influenced the regions.Taking the northern key region as a representation,at the time of the maximum regional-average HRR,slantwise ascent of the airflow along a warm-frontal-like boundary released energy related to symmetrical instability,resulting in stratiform rainfall with weak convective cores.The transport of locally initiated convection over the eastern plain region,where the atmospheric stratification was more potentially unstable,also significantly contributed.When the maximum site-observed HRR occurred,the terrain lifting of warm and moist southeast airflow led to intense convection over the mountain foothills.Overall,the passage of the warm-core typhoon remnant vortex and interaction with Taihang Mountains determined the timing and location of extreme HRRs across the key regions.展开更多
BACKGROUND With an increase in the elderly population,the frequency of hospitalizations in recent years has also risen at a rapid pace.This,in turn,has resulted in poor outcomes and costly treatments.Hospitalization r...BACKGROUND With an increase in the elderly population,the frequency of hospitalizations in recent years has also risen at a rapid pace.This,in turn,has resulted in poor outcomes and costly treatments.Hospitalization rates increase in elderly patients due to a decline in glomerular filtration rate(GFR).AIM To investigate the connection between GFR and comorbidity and reasons for hospitalization in elderly patients.METHODS We analyzed patients aged 75 years and over who were admitted to the internal medicine clinic of a tertiary hospital in Eskisehir.At admission,we calculated GFR values using the Modification of Diet in Renal Disease study formula and classified them into six categories:G1,G2,G3a,G3b,G4,and G5.We analyzed associations with hospitalization diagnoses and comorbidity factors.RESULTS The average age of the patients was 80.8 years(±4.5 years).GFR was 57.287±29.5 mL/kg/1.73 m2 in women and 61.3±31.5 mL/kg/1.73 m2 in men(P=0.106).Most patients were admitted to the hospital at G2 stage(32.8%).The main reasons for hospitalization were anemia(34.4%and 28.6%)and malnutrition(20.9%and 20.8%)in women and men,respectively(P=0.078).The most frequent comor-bidity leading to hospitalization was arterial hypertension(n=168,28%),fo-llowed by diabetes(n=166,27.7%)(P=0.001).CONCLUSION When evaluating geriatric patients,low GFR alone does not provide sufficient information.Patients’comorbid factors should also be taken into account.There is no association between low GFR during hospitalization and hospitalization-Hamarat H.Aging and GFR related diagnoses.Knowing the GFR value before hospitalization will be more informative in such studies.展开更多
Ratoon rice(Oryza sativa L.)is a sustainable planting model,and its planting area has been increasing year by year.However,there is a lack of literature reviewing the measures and mechanisms to regulate the regenerati...Ratoon rice(Oryza sativa L.)is a sustainable planting model,and its planting area has been increasing year by year.However,there is a lack of literature reviewing the measures and mechanisms to regulate the regeneration rate,as well as the challenges in the production of ratoon rice.This study explores the effects of different varieties,climatic conditions(light and temperature),and cultivation measures(fertilizer management,cropping system,harvest method,water management,and plant growth regulators)on the regeneration rate and grain yield of the ratoon season.It summarizes and analyzes the possible mechanisms that affect the germination of regenerated buds from the perspectives of material accumulation and transportation,hormone metabolism,and molecular mechanisms,and identifies main factors currently limiting the development of ratoon rice.A significant positive correlation between the regeneration rate and grain yield of the ratoon season was found,regulated by varieties,temperatures,light resources,and cultivation measures.Improving the regeneration rate can effectively increase the production of ratoon rice.Notably,rice varieties with high regeneration ability exhibit characteristics such as a suitable growth period,a developed root system,high single-stem weight,a relatively small ratio of grain number to green leaf area,and strong lodging resistance in the main season.Additionally,the germination of regenerated buds is regulated by the accumulation and transport of endogenous hormones(indole-3-acetic acid,gibberellins,and cytokinins),photoassimilates(non-structural carbohydrates),and reactive oxygen metabolism.To further demonstrate the grain yield potential of the ratoon season,improvements are needed in three key areas:the cultivation system of low-stubble ratoon rice,the development of specialized harvesters,and the breeding of rice varieties with high-temperature tolerance during the main crop and low-temperature tolerance during the ratoon crop.展开更多
Hot deformation with high strain rate has been paid more attention due to its high efficiency and low cost,however,the strain rate dependent dynamic recrystallization(DRX)and texture evolution in hot deformation proce...Hot deformation with high strain rate has been paid more attention due to its high efficiency and low cost,however,the strain rate dependent dynamic recrystallization(DRX)and texture evolution in hot deformation process,which affect the formability of metals,are lack of study.In this work,the DRX behavior and texture evolution of Mg-8Gd-1Er-0.5Zr alloy hot compressed with strain rates of 0.1 s^(−1),1 s^(−1),10 s^(−1) and 50 s^(−1) are studied,and the corresponding dominant mechanisms for DRX and texture weakening are discussed.Results indicated the DRX fraction was 20%and the whole texture intensity was 16.89 MRD when the strain rate was 0.1 s^(−1),but they were 76%and 6.55 MRD,respectively,when the strain rate increased to 50 s^(−1).The increment of DRX fraction is suggested to result from the reduced DRX critical strain and the increased dislocation density as well as velocity,while the weakened whole texture is attributed to the increased DRX grains.At the low strain rate of 0.1 s^(−1),discontinuous DRX(DDRX)was the dominant,but the whole texture was controlled by the deformed grains with the preferred orientation of{0001}⊥CD,because the number of DDRX grains was limited.At the high strain rate of 50 s^(−1),continuous DRX(CDRX)and twin-induced DRX(TDRX)were promoted,and more DRX grains resulted in orientation randomization.The whole texture was mainly weakened by CDRX and TDRX grains,in which CDRX plays a major role.The results of present work are significant for understanding the hot workability of Mg-RE alloys with a high strain rate.展开更多
The content of soluble sugars is a vital parameter that indicates the quality of fleshy fruits such as apple(Malus domestica Borkh.).Studying the patterns of accumulation of soluble sugars and regulatory mechanisms as...The content of soluble sugars is a vital parameter that indicates the quality of fleshy fruits such as apple(Malus domestica Borkh.).Studying the patterns of accumulation of soluble sugars and regulatory mechanisms associated with fruit development is crucial for breeding improved fruit varieties.Here,we report that MdCIbHLH1,a low temperature-induced b HLH transcription factor,inhibits the accumulation of soluble sugars by regulating sugar-metabolizing enzyme activities,photosynthetic performance,and the expression of sugar-related genes in developing apple fruits.MdCIbHLH1 inhibits MdFBP and MdPEPCK expression,thus blocking the conversion of acids to sugars in apple fruits.We also discovered that MdCIbHLH1 decreases the photosynthetic rate and carbohydrate accumulation in apple leaves.Our results suggest that soluble sugar accumulation in apple fruits is influenced by multiple factors,including metabolic status,photosynthesis,and carbohydrate allocation.MdCIbHLH1 is critically involved in controlling the accumulation of soluble sugars by coordinating carbohydrate synthesis and allocation,thus influencing sugar transport and its metabolism during the development of apple fruits.展开更多
As the main geomaterials for coral reefs oil or gas extraction and underground infrastructure construction,coral reef limestone demonstrates significantly distinct mechanical responses compared to terrigenous rocks.To...As the main geomaterials for coral reefs oil or gas extraction and underground infrastructure construction,coral reef limestone demonstrates significantly distinct mechanical responses compared to terrigenous rocks.To investigate the mechanical behaviour of coral reef limestone under the coupling impact of size and strain rate,the uniaxial compression tests were conducted on reef limestone samples with length-to-diameter(L/D)ratio ranging from 0.5 to 2.0 at strain rate ranging from 10^(−5)·s^(−1)to 10^(−2)·s^(−1).It is revealed that the uniaxial compressive strength(UCS)and residual compressive strength(RCS)of coral reef limestone exhibits a decreasing trend with L/D ratio increasing.The dynamic increase factor(DIF)of UCS is linearly correlated with the logarithm of strain rate,while increasing the L/D ratio further enhances the DIF.The elastic modulus increases with strain rate or L/D ratio increasing,whereas the Poisson’s ratio approximates to a constant value of 0.24.The failure strain increases with strain rate increasing or L/D ratio decreasing,while the increase in L/D ratio will inhibit the enhancing effect of the strain rate.The high porosity and low mineral strength are the primary factors contributing to a high RCS of 16.7%–64.9%of UCS,a lower brittleness index and multiple irregular fracture planes.The failure pattern of coral reef limestone transits from the shear-dominated to the splitting-dominated failure with strain rate increasing or L/D ratio decreasing,which is mainly governed by the constrained zones induced by end friction and the strain rate-dependent crack propagation.Moreover,a predictive formula incorporating coupling effect of size and strain rate for the UCS of reef limestone was established and verified to effectively capture the trend of UCS.展开更多
Although time-dependent deformation of geomaterials underpins slope-failure prediction models,the influence of strain rate on shearing strength and deformation behavior of loess remains unclear.The consolidated undrai...Although time-dependent deformation of geomaterials underpins slope-failure prediction models,the influence of strain rate on shearing strength and deformation behavior of loess remains unclear.The consolidated undrained(CU)and drained(CD)triaxial testing elucidated the impact of strain rate(0.005–0.3 mm/min)on strength envelopes,deformation moduli,pore pressures,and dilatancy characteristics of unsaturated and quasi-saturated loess.Under drained conditions with a controlled matric suction of 50 kPa,increasing strain rates from 0.005 mm/min to 0.011 mm/min induced decreases in failure deviatoric stress(qf),initial deformation modulus(Ei),and cohesion(c),while friction angles remained unaffected.Specimens displayed initial contractive volumetric strains transitioning to dilation across varying confining pressures.Higher rates diminished contractive volumetric strains and drainage volumes,indicating reduced densification and strength in the shear zone.Under undrained conditions,both unsaturated and quasi-saturated(pore pressure coefficient B=0.75)loess exhibited deteriorating mechanical properties with increasing rates from 0.03 mm/min to 0.3 mm/min.For unsaturated loess,reduced contractive volumetric strains at higher rates manifested relatively looser structures in the pre-peak stress phase.The strength decrement in quasi-saturated loess arose from elevated excess porewater pressures diminishing effective stresses.Negative porewater pressures emerged in quasi-saturated loess at lower confining pressures and strain rates.Compared to previous studies,the qf and Ei exhibited rate sensitivity below threshold values before attaining minima with marginal subsequent influence.The underlying mechanism mirrors the transition from creep to accelerated deformation phase of landslides.展开更多
In this work,a series of experiments are carried out to investigate the effect of charge/discharge rates(1,2,3 and 4 C)and state of charges(SOCs,namely 0%,50%,75%and 100%)on thermal runaway(TR)and fire behavior of lit...In this work,a series of experiments are carried out to investigate the effect of charge/discharge rates(1,2,3 and 4 C)and state of charges(SOCs,namely 0%,50%,75%and 100%)on thermal runaway(TR)and fire behavior of lithium iron phosphate(LFP)batteries.The TR process caused by overheating LFP batteries is usually divided into four stages,with high temperatures and fire risks.High-rate charge and discharge damage the internal morphology and structural stability of materials seriously.The TR behavior of battery is fully aggravated,which is further manifested by the advanced opening of the safety vent,release of gas and occurrence of TR.With the increase of charging rate,the deteriorated TR characteristics can be discerned,such as the lower TR temperature,the shorter TR time,and the more serious TR consequences.Such changes can be assigned to the decline of battery stability.In addition,the battery SOC greatly impacts safety,especially the flame temperature and the severity of consequences.As for the 100%SOC battery cycled at 4 C,there is still a high risk of thermal runaway propagation at the position 1 m far away from the battery.This work helps to realize the TR and fire features of battery in-depth,enlightening the safety protection of battery.展开更多
The karst forest in southwestern China is characterized by thin soil layers,numerous fissures and holes,resulting in low soil water availability and poor water retention,making it challenging for plant growth and surv...The karst forest in southwestern China is characterized by thin soil layers,numerous fissures and holes,resulting in low soil water availability and poor water retention,making it challenging for plant growth and survival.While the relationship between plant functional traits and tree growth performance has been extensively studied,the links between tree seasonal growth and drought-tolerant traits in tree species with different leaf habit remains poorly understood.This study evaluated the associations between four-year averaged rainy season stem diameter growth rate and 17 branch and leaf traits across evergreen and deciduous species in a tropical karst forest in southwest China.The cross-species variations in tree growth rates were related to plant hydraulic traits(e.g.,vessel lumen diameter,xylem vessel density,stomatal density,and stomatal size)and leaf anatomical traits(e.g.,total leaf thickness,lower/upper epidermis thickness,and spongy thickness).The growth of evergreen trees exhibited lower hydraulic efficiency but greater drought tolerance than deciduous tree,which enabled them to maintain higher persistence under low soil water availability and consequently a relatively longer growing season.In contrast,deciduous species showed no correlation between their functional traits and growth rate.The distinct water use strategies of evergreen and deciduous trees may offer a potential explanation for their co-existence in the tropical karst forests.展开更多
Natural cemented calcareous sand and limestone are highly complex and not well understood in terms of the me-chanical behavior due to the difficulty of obtaining undisturbed samples from far sea.This paper proposes an...Natural cemented calcareous sand and limestone are highly complex and not well understood in terms of the me-chanical behavior due to the difficulty of obtaining undisturbed samples from far sea.This paper proposes an artificial method in a laboratory setting using microbial-induced carbonate precipitation(MICP)to simulate the natural process of cementation of limestone.The artificially cemented sand has a high degree of similarity with the natural weakly limestone in three aspects:(1)the mineral composition of the cemented material is also granular calcite and acicular aragonite;(2)the microstructure in interconnected open pore network can be gradually closed and contracted with cementation.The porosity reaches to approximately 9.2%;(3)both the stress-strain relationship and the unconfined strength closely resemble that of natural weakly limestone.Furthermore,both static and dynamic behaviors of artificial limestone were studied by quasi-static compression tests and Split Hopkinson Pressure Bar(SHPB)tests,finding that the unconfined strength of weakly artifical limestone exponentially increases with increasing strain rate.A rate-dependent bond strength was proposed and implemented in software to reveal the mechanism of strain rate effects.It is found that the loading velocity is too high to keep in sync with the initiation and propagation of cracks under impact loading.This delay-induced viscosity may restrict the movement of the surrounding balls,thus increasing resistance.展开更多
Grain-oriented silicon steels were prepared at different heating rates during high temperature annealing,in which the evolution of magnetic properties,grain orientations and precipitates were studied.To illustrate the...Grain-oriented silicon steels were prepared at different heating rates during high temperature annealing,in which the evolution of magnetic properties,grain orientations and precipitates were studied.To illustrate the Zener factor,the diameter and number density of precipitates of interrupted testing samples were statistically calculated.The effect of precipitate ripening on the Goss texture and magnetic property was investigated.Data indicated that the trend of Zener factor was similar under different heating rates,first increasing and then decreasing,and that the precipitate maturing was greatly inhibited as the heating rate increased.Secondary recrystallization was developed at the temperature of 1010℃when a heating rate of 5℃/h was used,resulting in Goss,Brass and{110}<227>oriented grains growing abnormally and a magnetic induction intensity of 1.90T.Furthermore,increasing the heating rate to 20℃/h would inhibit the development of undesirable oriented grains and obtain a sharp Goss texture.However,when the heating rate was extremely fast,such as 40℃/h,poor secondary recrystallization was developed with many island grains,corresponding to a decrease in magnetic induction intensity to 1.87 T.At a suitable heating rate of 20℃/h,the sharpest Goss texture and the highest magnetic induction of 1.94 T with an onset secondary recrystallization temperature of 1020℃were found among the experimental variables in this study.The heating rate affected the initial temperature of secondary recrystallization by controlling the maturation of precipitates,leading to the deviation and dispersion of Goss texture,thereby reducing the magnetic properties.展开更多
基金National Key Research and Development Program of China(2024YFB4610803)。
文摘The fatigue crack growth rate of a novel Ti-6Al-4V-1Mo titanium alloy,which is developed for laser directed energy deposition technique,was investigated before and after cyclic heat treatment(CHT).Changes in microstructure,fracture surfaces,and crack growth paths were analyzed before and after CHT.Results indicate that in the stable crack growth region,the growth rates for the as-deposited and cyclic heat-treated specimens follow the relationships da/dN=1.8651×10^(−8)(ΔK)^(3.2271)and da/dN=1.4112×10^(−8)(ΔK)^(3.1125),respectively.Compared with that at the as-deposited state,the microstructure after CHT is transformed from a uniform basket-weave microstructure to a dual-phase microstructure consisting of near-sphericalαandβ-transformed matrix phases.The cyclic process also disrupts the continuity of the grain boundaryα(αGB)at the primaryβ-phase grain boundary.The coarsening of primaryαand the disruption ofαGB continuity are the primary factors to release stress concentration and promote crack deflection,thereby decreasing the fatigue crack growth rate.Additionally,the increased occurrence of crack branching,secondary cracking,and crack bridging in cyclic heat-treated specimens further reduces the crack driving force and slows the fatigue crack growth rate.
基金Shaanxi Provincial People’s Hospital Science and Technology Development Incubation Fund,“Research on the Role and Mechanism of PIGU in Regulating MUC-1 in Gastric Cancer Immune Escape”(Project No.:2023YJY-29)Shaanxi Provincial Natural Science Basic Research Program,“Research on the Mechanism and Clinical Significance of miR-140-5p Related to Gastric Cancer Recurrence and Metastasis”(Project No.:2023-JC-YB-639)。
文摘Early-stage gastric cancer;Extent of lymph node dissection;D1 dissection;D2 dissection;Recurrence rate;Survival rateObjective:To investigate the impact of different lymph node dissection scopes on postoperative recurrence and survival rates in patients with early gastric cancer,providing evidence-based support for optimizing clinical surgical plans.Methods:A retrospective analysis was conducted on the clinical data of 100 patients with early gastric cancer who underwent surgical treatment at our hospital from October 2021 to October 2023.Patients were divided into Group D1(n=50)and Group D2(n=50)based on the extent of lymph node dissection.Group D1 underwent limited lymph node dissection(dissection of the first station of lymph nodes around the stomach),while Group D2 underwent standard lymph node dissection(dissection of the first and second stations of lymph nodes around the stomach).Surgical-related indicators,the incidence of postoperative complications,the 2-year recurrence rate,and the 2-year survival rate were compared between the two groups of patients.Results:The operative time,intraoperative blood loss,postoperative hospital stay,and the number of lymph nodes dissected were significantly higher in the D2 group than in the D1 group(all P<0.001).The overall incidence of postoperative complications was higher in the D1 group than in the D2 group,but the difference was not statistically significant(χ^(2)=0.884,P=0.766).After a 2-year follow-up,the recurrence rate was significantly higher in the D1 group than in the D2 group(χ^(2)=4.000,P=0.046).The 2-year survival rate was significantly lower in the D1 group than in the D2 group(χ^(2)=5.005,P=0.025).A total of 100 patients with early-stage gastric cancer were grouped according to the depth of invasion,degree of differentiation,and lymph node metastasis status,and the recurrence rates of different subgroups were compared.The results showed that the recurrence rate was higher in patients with T1b stage than in those with T1a stage(χ^(2)=5.005,P=0.025),higher in poorly differentiated patients than in moderately and well-differentiated patients(χ^(2)=4.155,P=0.042),and higher in patients with lymph node metastasis than in those without lymph node metastasis(χ^(2)=4.512,P=0.034).Conclusion:Compared with D1 limited lymph node dissection,D2 standard lymph node dissection can significantly reduce the postoperative recurrence rate and improve the 2-year survival rate in patients with early-stage gastric cancer without significantly increasing the risk of postoperative complications.Although the surgical trauma is slightly greater,the overall prognosis is better,making it a preferred surgical treatment option for patients with early-stage gastric cancer.
文摘Apparel exports China:The decline in exports widened from January to September(-2.4%,compared to-0.2%in January-June).Exports to the EU increased(+5.9%),though the growth rate moderated.Exports to the US saw a larger contraction(January-June:-1.6%,January-September:-8.2%).While exports to ASEAN countries still fell by over 10%(-17.7%),shipments to the Philippines(+6.9%),Indonesia(+19.0%),and Cambodia(+64.9%)demonstrated stronger growth performance within the year.Regarding tariffs,on October 30,China and the US agreed to lower the rates on goods subject to additional duties(effectively reducing the average tariff rate on Chinese imports to the US from about 57%to approximately 47%,though this remains significantly higher than the 19.5%overall average rate applied to other countries).
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52474362,52174317 and 51904146)the General Project Funded by Liaoning Province Education Department(Grant No.JYTMS20230943)。
文摘The high-alloyed wrought superalloy GH4975 tends to form coarse MC carbides and eutectic(γ+γ′)phases,which adversely affect the cogging and homogenization process.To provide theoretical guidance for control of MC carbides and eutectic(γ+γ′)formation,differential thermal analysis(DTA)was utilized to investigate the effect of cooing rate(10-90℃·min^(-1))on solidification behavior and micro-segregation of GH4975 alloy.According to the thermodynamic calculation and distribution characteristics of precipitates,the MC carbides can act as nucleation sites forγdendrites,but the nucleation ofγdendrites becomes less dependent on the MC carbide primers at higher cooling rates.As theγdendrites grow,the elements including Ti and Nb gradually accumulate in the residual liquid and leads to the formation of more MC carbides near the interdendritic region.Finally,the solidification is terminated with the formation of eutectic(γ+γ′).With an increase in cooling rate,the liquidus temperature rises,but the solidus temperature decreases,and thus the solidification range is obviously enlarged.The dendritic structure is significantly refined by the increase of cooling rate.The secondary dendrite arm spacing,λ_(2),as a function of cooling rate,T,can be expressed asλ_(2)=216.78T^(-0.42).Moreover,the increasing cooling rate weakens the back diffusion of Al,Ti,and Nb,increases the undercooling,and limits the growth of precipitates.Consequently,the sizes of MC carbides,eutectic(γ+γ′),and primaryγ′significantly decrease,but the area fraction of eutectic(γ+γ′)linerly increases as the cooling rate rises.Thus moderate cooling rate(such as 30℃·min^(-1))should be selected during the solidification process of GH4975 alloy.
文摘When a porous rock is subjected to overall compressive loading,either increasing pore pressure or decreasing confining pressure could result in rock failure.The stress path and the applied pressure change rate may affect the initiation and propagation of fractures within brittle materials.Understanding the physical mechanisms leading to failure is crucial for underground engineering applications and geo-energy exploration and storage.We conducted triaxial compression experiments on porous Bentheim sandstone samples at different stress paths and pressure change rates.First,at a constant confining pressure of 35 MPa and pore pressure of 5 MPa,intact cylindrical samples were axially loaded up to about 85%of the peak strength.Subsequently,the axial piston position was fixed,and then either the pore pressure was increased or the confining pressure was decreased at two different rates(0.5 MPa/min or 2 MPa/min),leading to final catastrophic failure.The mechanical results revealed that samples subjected to higher rates of decreasing effective confining pressure exhibited larger stress drop rates,higher slip rates,higher total breakdown work,higher rates of acoustic emissions(AEs)before failure,and higher post-failure AE decay rates.In contrast,the applied stress path did not significantly affect rock failure characteristics.Comparison of located AE events with post-mortem microstructures of deformed samples shows a good agreement.The AE source type determined from the P-wave first-motion polarity shows that shear failure dominated the fracture process when approaching failure.Gutenberg-Richter b-values revealed a significant decrease before failure in all tests.Our results indicate that,in contrast to the stress path,the rate of effective stress change strongly affects fracturing behavior and AE rate changes.
基金supported by the National Key Research and Development Program of China(Grant No.2023YFC3007102)the National Natural Science Foundation of China(Grant Nos.42477188 and 41925012).
文摘One of the key challenges for underground rock reservoirs is ensuring prevention of the unwanted fluid leakage through rock fracture networks during their service life.Microbial-induced calcium carbonate precipitation(MICP)technology has emerged as a promising bio-healing method for rock fractures with small apertures.In this study,a new“three-stage”injection strategy-based MICP(TS-MICP)bio-healing method was proposed,aiming to achieve a“three-high”performance that includes high bridging rate,high mechanical strength,and high homogeneity.A series of meter-scale rock fracture models were prepared to conduct TS-MICP grouting tests.Compared with the traditional injection strategy-based biohealing methods,the TS-MICP method significantly improved the bridging rate(32.1%e89.5%),mechanical properties(0.138e1.023 MPa),and homogeneity of CaCO_(3)precipitation(334.4%).Additionally,it achieved a higher material utilization rate(1.72 times higher),reducing the consumption of cementation solution(CS)by 258.8%,thereby demonstrating greater potential for field applications.The underlying mechanism for achieving high bridging rate and high homogeneity in CaCO_(3)precipitation can be attributed to the synergistic effects of the coupling injection strategy,which optimizes the advantages at each stage.In stage I,under the influence of gravity,the rapid flocculation and hydrogen bonding interactions of organic matter lead to formation of the dense and high-strength CaCO_(3)precipitation at the bottom using a low-concentration bacterial suspension(BS).This process establishes bridging steps along the wall sides for subsequent uniform CaCO_(3)precipitation.In stage II,concentrated BS is utilized to produce looser CaCO_(3)flocculation,which precipitates uniformly on the pre-existing bridging steps.In stage III,a two-step injection strategy was employed to reinforce the loose CaCO_(3)crystals formed in stages I and II,and finally forms a strong bridging effect with“three-high”performance.
文摘As a critical department ensuring the sterility of hospital instruments,the Sterile Supply Center(SSC)directly impacts the sterility status of clinical instruments through its sterilization qualification rate.Geriatric patients,due to physiological decline and compromised immune function,constitute a high-risk group for hospital-acquired infections,with more stringent requirements for instrument sterility.This paper analyzes the current status and influencing factors of sterilization qualification rates in SSCs,explores the mechanistic association between sterilization qualification rates and infections in geriatric departments,and proposes targeted strategies to improve sterilization qualification rates.It highlights the pivotal role of SSC instrument sterilization in infection prevention and control for geriatric patients,providing theoretical basis and practical guidance for optimizing SSC management,reducing infection rates in geriatric departments,and ensuring the safety of elderly patients’medical care.These findings aim to enhance overall infection management standards in hospitals.
文摘On January 19,2026,China's first structural interest rate cut of the year took effect.The People's Bank of China announced a 0.25 percentage point reduction in relending and rediscount rates,targeting key sectors like small and micro enterprises(SMEs),technological innovation,and green transition.For the textile industry,where small and medium-sized enterprises account for over 90%of traditional manufacturing,the policy benefits will inject strong momentum into the high-quality development from multiple dimensions,including reduced financing costs,support for transformation funds,and expansion of foreign trade markets.
基金surported by the China Scholarship Council(CSC)(201608525023)
文摘For the sake of saving energy and reducing emissions, this paper will introduce a design of oil-saving device for the simple cylinder 250 water-cooled petrol engine. The oil-saving device is based on the principle of heat transfer and capture. By raising the heat of the oil mist up to 50℃, absorption and gathering the released gas from the opening valve, the engine can achieve fuel-saving purpose. The oil-saving device was made by 3D print technology. UG8.0 and ANSYS workbench were used in the design of device.
基金supported by the National Key R&D Program of China(2022YFC3003903)Natural Science Foundation of Beijing(Grant No.8222079)and of China(Grant No.42475014,U2442204)the Basic Research Fund of CAMS(2023Z001).
文摘This study investigates extreme rainfall episodes along the eastern foothills of the Taihang Mountains in North China from 30 July to 1 August 2023.It focuses on two types of extreme hourly rainfall rates(HRRs),i.e.,the maximum regionalaverage HRR and site-observed HRR,which exhibited sequential development over southern,middle,and northern key regions.These rainfall extremes occurred in an environment where a high-pressure barrier over North China prevented the intrusion of cold air masses from the north while a northward-moving typhoon remnant vortex and its associated low-level jet(LLJ)transported warm and moist airflow from the south.Two distinct echo evolution modes and convection initiation mechanisms are identified for the two types of extreme HRRs.The maximum regional-average HRR occurred when the LLJ arrived to the east of the key regions,while the maximum site-observed HRR occurred when the warmer vortex center influenced the regions.Taking the northern key region as a representation,at the time of the maximum regional-average HRR,slantwise ascent of the airflow along a warm-frontal-like boundary released energy related to symmetrical instability,resulting in stratiform rainfall with weak convective cores.The transport of locally initiated convection over the eastern plain region,where the atmospheric stratification was more potentially unstable,also significantly contributed.When the maximum site-observed HRR occurred,the terrain lifting of warm and moist southeast airflow led to intense convection over the mountain foothills.Overall,the passage of the warm-core typhoon remnant vortex and interaction with Taihang Mountains determined the timing and location of extreme HRRs across the key regions.
文摘BACKGROUND With an increase in the elderly population,the frequency of hospitalizations in recent years has also risen at a rapid pace.This,in turn,has resulted in poor outcomes and costly treatments.Hospitalization rates increase in elderly patients due to a decline in glomerular filtration rate(GFR).AIM To investigate the connection between GFR and comorbidity and reasons for hospitalization in elderly patients.METHODS We analyzed patients aged 75 years and over who were admitted to the internal medicine clinic of a tertiary hospital in Eskisehir.At admission,we calculated GFR values using the Modification of Diet in Renal Disease study formula and classified them into six categories:G1,G2,G3a,G3b,G4,and G5.We analyzed associations with hospitalization diagnoses and comorbidity factors.RESULTS The average age of the patients was 80.8 years(±4.5 years).GFR was 57.287±29.5 mL/kg/1.73 m2 in women and 61.3±31.5 mL/kg/1.73 m2 in men(P=0.106).Most patients were admitted to the hospital at G2 stage(32.8%).The main reasons for hospitalization were anemia(34.4%and 28.6%)and malnutrition(20.9%and 20.8%)in women and men,respectively(P=0.078).The most frequent comor-bidity leading to hospitalization was arterial hypertension(n=168,28%),fo-llowed by diabetes(n=166,27.7%)(P=0.001).CONCLUSION When evaluating geriatric patients,low GFR alone does not provide sufficient information.Patients’comorbid factors should also be taken into account.There is no association between low GFR during hospitalization and hospitalization-Hamarat H.Aging and GFR related diagnoses.Knowing the GFR value before hospitalization will be more informative in such studies.
基金supported by the National Natural Science Foundation of China(Grant No.32301934)the Hunan Provincial Natural Science Foundation,China(Grant No.2023JJ40470)+1 种基金Ten Key Technological Projects in Hunan Province Project,China(Grant No.2025QK1006)Changsha Science and Technology Program Project,China(Grant No.kq2404003).
文摘Ratoon rice(Oryza sativa L.)is a sustainable planting model,and its planting area has been increasing year by year.However,there is a lack of literature reviewing the measures and mechanisms to regulate the regeneration rate,as well as the challenges in the production of ratoon rice.This study explores the effects of different varieties,climatic conditions(light and temperature),and cultivation measures(fertilizer management,cropping system,harvest method,water management,and plant growth regulators)on the regeneration rate and grain yield of the ratoon season.It summarizes and analyzes the possible mechanisms that affect the germination of regenerated buds from the perspectives of material accumulation and transportation,hormone metabolism,and molecular mechanisms,and identifies main factors currently limiting the development of ratoon rice.A significant positive correlation between the regeneration rate and grain yield of the ratoon season was found,regulated by varieties,temperatures,light resources,and cultivation measures.Improving the regeneration rate can effectively increase the production of ratoon rice.Notably,rice varieties with high regeneration ability exhibit characteristics such as a suitable growth period,a developed root system,high single-stem weight,a relatively small ratio of grain number to green leaf area,and strong lodging resistance in the main season.Additionally,the germination of regenerated buds is regulated by the accumulation and transport of endogenous hormones(indole-3-acetic acid,gibberellins,and cytokinins),photoassimilates(non-structural carbohydrates),and reactive oxygen metabolism.To further demonstrate the grain yield potential of the ratoon season,improvements are needed in three key areas:the cultivation system of low-stubble ratoon rice,the development of specialized harvesters,and the breeding of rice varieties with high-temperature tolerance during the main crop and low-temperature tolerance during the ratoon crop.
基金supported by the Nation Key Research and Development Program of China(No.2021YFB3701100).
文摘Hot deformation with high strain rate has been paid more attention due to its high efficiency and low cost,however,the strain rate dependent dynamic recrystallization(DRX)and texture evolution in hot deformation process,which affect the formability of metals,are lack of study.In this work,the DRX behavior and texture evolution of Mg-8Gd-1Er-0.5Zr alloy hot compressed with strain rates of 0.1 s^(−1),1 s^(−1),10 s^(−1) and 50 s^(−1) are studied,and the corresponding dominant mechanisms for DRX and texture weakening are discussed.Results indicated the DRX fraction was 20%and the whole texture intensity was 16.89 MRD when the strain rate was 0.1 s^(−1),but they were 76%and 6.55 MRD,respectively,when the strain rate increased to 50 s^(−1).The increment of DRX fraction is suggested to result from the reduced DRX critical strain and the increased dislocation density as well as velocity,while the weakened whole texture is attributed to the increased DRX grains.At the low strain rate of 0.1 s^(−1),discontinuous DRX(DDRX)was the dominant,but the whole texture was controlled by the deformed grains with the preferred orientation of{0001}⊥CD,because the number of DDRX grains was limited.At the high strain rate of 50 s^(−1),continuous DRX(CDRX)and twin-induced DRX(TDRX)were promoted,and more DRX grains resulted in orientation randomization.The whole texture was mainly weakened by CDRX and TDRX grains,in which CDRX plays a major role.The results of present work are significant for understanding the hot workability of Mg-RE alloys with a high strain rate.
基金supported by grants from the National Natural Science Foundation of China(Grant Nos.32122080,31972375)Shandong Province(Grant No.ZR2020YQ25)。
文摘The content of soluble sugars is a vital parameter that indicates the quality of fleshy fruits such as apple(Malus domestica Borkh.).Studying the patterns of accumulation of soluble sugars and regulatory mechanisms associated with fruit development is crucial for breeding improved fruit varieties.Here,we report that MdCIbHLH1,a low temperature-induced b HLH transcription factor,inhibits the accumulation of soluble sugars by regulating sugar-metabolizing enzyme activities,photosynthetic performance,and the expression of sugar-related genes in developing apple fruits.MdCIbHLH1 inhibits MdFBP and MdPEPCK expression,thus blocking the conversion of acids to sugars in apple fruits.We also discovered that MdCIbHLH1 decreases the photosynthetic rate and carbohydrate accumulation in apple leaves.Our results suggest that soluble sugar accumulation in apple fruits is influenced by multiple factors,including metabolic status,photosynthesis,and carbohydrate allocation.MdCIbHLH1 is critically involved in controlling the accumulation of soluble sugars by coordinating carbohydrate synthesis and allocation,thus influencing sugar transport and its metabolism during the development of apple fruits.
基金supported by the National Natural Science Foundation of China(Nos.52222110,52401354,and 52301353).
文摘As the main geomaterials for coral reefs oil or gas extraction and underground infrastructure construction,coral reef limestone demonstrates significantly distinct mechanical responses compared to terrigenous rocks.To investigate the mechanical behaviour of coral reef limestone under the coupling impact of size and strain rate,the uniaxial compression tests were conducted on reef limestone samples with length-to-diameter(L/D)ratio ranging from 0.5 to 2.0 at strain rate ranging from 10^(−5)·s^(−1)to 10^(−2)·s^(−1).It is revealed that the uniaxial compressive strength(UCS)and residual compressive strength(RCS)of coral reef limestone exhibits a decreasing trend with L/D ratio increasing.The dynamic increase factor(DIF)of UCS is linearly correlated with the logarithm of strain rate,while increasing the L/D ratio further enhances the DIF.The elastic modulus increases with strain rate or L/D ratio increasing,whereas the Poisson’s ratio approximates to a constant value of 0.24.The failure strain increases with strain rate increasing or L/D ratio decreasing,while the increase in L/D ratio will inhibit the enhancing effect of the strain rate.The high porosity and low mineral strength are the primary factors contributing to a high RCS of 16.7%–64.9%of UCS,a lower brittleness index and multiple irregular fracture planes.The failure pattern of coral reef limestone transits from the shear-dominated to the splitting-dominated failure with strain rate increasing or L/D ratio decreasing,which is mainly governed by the constrained zones induced by end friction and the strain rate-dependent crack propagation.Moreover,a predictive formula incorporating coupling effect of size and strain rate for the UCS of reef limestone was established and verified to effectively capture the trend of UCS.
文摘Although time-dependent deformation of geomaterials underpins slope-failure prediction models,the influence of strain rate on shearing strength and deformation behavior of loess remains unclear.The consolidated undrained(CU)and drained(CD)triaxial testing elucidated the impact of strain rate(0.005–0.3 mm/min)on strength envelopes,deformation moduli,pore pressures,and dilatancy characteristics of unsaturated and quasi-saturated loess.Under drained conditions with a controlled matric suction of 50 kPa,increasing strain rates from 0.005 mm/min to 0.011 mm/min induced decreases in failure deviatoric stress(qf),initial deformation modulus(Ei),and cohesion(c),while friction angles remained unaffected.Specimens displayed initial contractive volumetric strains transitioning to dilation across varying confining pressures.Higher rates diminished contractive volumetric strains and drainage volumes,indicating reduced densification and strength in the shear zone.Under undrained conditions,both unsaturated and quasi-saturated(pore pressure coefficient B=0.75)loess exhibited deteriorating mechanical properties with increasing rates from 0.03 mm/min to 0.3 mm/min.For unsaturated loess,reduced contractive volumetric strains at higher rates manifested relatively looser structures in the pre-peak stress phase.The strength decrement in quasi-saturated loess arose from elevated excess porewater pressures diminishing effective stresses.Negative porewater pressures emerged in quasi-saturated loess at lower confining pressures and strain rates.Compared to previous studies,the qf and Ei exhibited rate sensitivity below threshold values before attaining minima with marginal subsequent influence.The underlying mechanism mirrors the transition from creep to accelerated deformation phase of landslides.
基金supported by the National Key Research and Development Plan(2023YFC3009900)the National Natural Science Foundation of China(52104197,52272396,52474233)+3 种基金Hongkong Scholar Program(XJ2022022)Research Grants Council of the Hong Kong Special Administrative Region(City U11214221)Natural Science Foundation of the Jiangsu Higher Education Institutions(21KJB620001)the Open Fund of the State Key Laboratory of Fire Science(SKLFS)Program(HZ2022-KF04)。
文摘In this work,a series of experiments are carried out to investigate the effect of charge/discharge rates(1,2,3 and 4 C)and state of charges(SOCs,namely 0%,50%,75%and 100%)on thermal runaway(TR)and fire behavior of lithium iron phosphate(LFP)batteries.The TR process caused by overheating LFP batteries is usually divided into four stages,with high temperatures and fire risks.High-rate charge and discharge damage the internal morphology and structural stability of materials seriously.The TR behavior of battery is fully aggravated,which is further manifested by the advanced opening of the safety vent,release of gas and occurrence of TR.With the increase of charging rate,the deteriorated TR characteristics can be discerned,such as the lower TR temperature,the shorter TR time,and the more serious TR consequences.Such changes can be assigned to the decline of battery stability.In addition,the battery SOC greatly impacts safety,especially the flame temperature and the severity of consequences.As for the 100%SOC battery cycled at 4 C,there is still a high risk of thermal runaway propagation at the position 1 m far away from the battery.This work helps to realize the TR and fire features of battery in-depth,enlightening the safety protection of battery.
基金financially funded by the National Natural Science Foundation of China(3186113307,31770533,31870591)the West Light Talent Program of the Chinese Academy of Sciences(xbzg-zdsys-202218).
文摘The karst forest in southwestern China is characterized by thin soil layers,numerous fissures and holes,resulting in low soil water availability and poor water retention,making it challenging for plant growth and survival.While the relationship between plant functional traits and tree growth performance has been extensively studied,the links between tree seasonal growth and drought-tolerant traits in tree species with different leaf habit remains poorly understood.This study evaluated the associations between four-year averaged rainy season stem diameter growth rate and 17 branch and leaf traits across evergreen and deciduous species in a tropical karst forest in southwest China.The cross-species variations in tree growth rates were related to plant hydraulic traits(e.g.,vessel lumen diameter,xylem vessel density,stomatal density,and stomatal size)and leaf anatomical traits(e.g.,total leaf thickness,lower/upper epidermis thickness,and spongy thickness).The growth of evergreen trees exhibited lower hydraulic efficiency but greater drought tolerance than deciduous tree,which enabled them to maintain higher persistence under low soil water availability and consequently a relatively longer growing season.In contrast,deciduous species showed no correlation between their functional traits and growth rate.The distinct water use strategies of evergreen and deciduous trees may offer a potential explanation for their co-existence in the tropical karst forests.
基金The authors would like to acknowledge the support of the National Natural Science Foundation of China(No.52279097,No.51779264)Blue and Green Project of Jiangsu Province.
文摘Natural cemented calcareous sand and limestone are highly complex and not well understood in terms of the me-chanical behavior due to the difficulty of obtaining undisturbed samples from far sea.This paper proposes an artificial method in a laboratory setting using microbial-induced carbonate precipitation(MICP)to simulate the natural process of cementation of limestone.The artificially cemented sand has a high degree of similarity with the natural weakly limestone in three aspects:(1)the mineral composition of the cemented material is also granular calcite and acicular aragonite;(2)the microstructure in interconnected open pore network can be gradually closed and contracted with cementation.The porosity reaches to approximately 9.2%;(3)both the stress-strain relationship and the unconfined strength closely resemble that of natural weakly limestone.Furthermore,both static and dynamic behaviors of artificial limestone were studied by quasi-static compression tests and Split Hopkinson Pressure Bar(SHPB)tests,finding that the unconfined strength of weakly artifical limestone exponentially increases with increasing strain rate.A rate-dependent bond strength was proposed and implemented in software to reveal the mechanism of strain rate effects.It is found that the loading velocity is too high to keep in sync with the initiation and propagation of cracks under impact loading.This delay-induced viscosity may restrict the movement of the surrounding balls,thus increasing resistance.
文摘Grain-oriented silicon steels were prepared at different heating rates during high temperature annealing,in which the evolution of magnetic properties,grain orientations and precipitates were studied.To illustrate the Zener factor,the diameter and number density of precipitates of interrupted testing samples were statistically calculated.The effect of precipitate ripening on the Goss texture and magnetic property was investigated.Data indicated that the trend of Zener factor was similar under different heating rates,first increasing and then decreasing,and that the precipitate maturing was greatly inhibited as the heating rate increased.Secondary recrystallization was developed at the temperature of 1010℃when a heating rate of 5℃/h was used,resulting in Goss,Brass and{110}<227>oriented grains growing abnormally and a magnetic induction intensity of 1.90T.Furthermore,increasing the heating rate to 20℃/h would inhibit the development of undesirable oriented grains and obtain a sharp Goss texture.However,when the heating rate was extremely fast,such as 40℃/h,poor secondary recrystallization was developed with many island grains,corresponding to a decrease in magnetic induction intensity to 1.87 T.At a suitable heating rate of 20℃/h,the sharpest Goss texture and the highest magnetic induction of 1.94 T with an onset secondary recrystallization temperature of 1020℃were found among the experimental variables in this study.The heating rate affected the initial temperature of secondary recrystallization by controlling the maturation of precipitates,leading to the deviation and dispersion of Goss texture,thereby reducing the magnetic properties.
