By reviewing the development of “three-high” oil and gas well testing technology of Sinopec in recent years, this paper systematically summarizes the application of “three-high” oil and gas well testing technology...By reviewing the development of “three-high” oil and gas well testing technology of Sinopec in recent years, this paper systematically summarizes the application of “three-high” oil and gas well testing technology of Sinopec in engineering optimization design technology, and high temperature and high pressure testing technology, high pressure and high temperature transformation completion integration technology. Major progress has been made in seven aspects: plug removal and re-production technology of production wells in high acid gas fields;wellbore preparation technology of ultra-deep, high-pressure, and high-temperature oil and gas wells;surface metering technology;and supporting tool development technology. This paper comprehensively analyzes the challenges faced by the “three-high” oil and gas well production testing technology in four aspects: downhole tools, production testing technology, safe production testing, and the development of low-cost production test tools. Four development directions are put forward: 1) Improve ultra-deep oil and gas testing technology and strengthen integrated geological engineering research. 2) Deepen oil and gas well integrity evaluation technology to ensure the life cycle of oil and gas wells. 3) Carry out high-end, customized, and intelligent research on oil test tools to promote the low-cost and efficient development of ultra deep reservoirs. 4) Promote the fully automatic control of the surface metering process to realize the safe development of “three-high” reservoirs.展开更多
During deep water oil well testing, the low temperature environment is easy to cause wax precipitation, which affects the normal operation of the test and increases operating costs and risks. Therefore, a numerical me...During deep water oil well testing, the low temperature environment is easy to cause wax precipitation, which affects the normal operation of the test and increases operating costs and risks. Therefore, a numerical method for predicting the wax precipitation region in oil strings was proposed based on the temperature and pressure fields of deep water test string and the wax precipitation calculation model. And the factors affecting the wax precipitation region were analyzed. The results show that: the wax precipitation region decreases with the increase of production rate, and increases with the decrease of geothermal gradient, increase of water depth and drop of water-cut of produced fluid, and increases slightly with the increase of formation pressure. Due to the effect of temperature and pressure fields, wax precipitation region is large in test strings at the beginning of well production. Wax precipitation region gradually increases with the increase of shut-in time. These conclusions can guide wax prevention during the testing of deep water oil well, to ensure the success of the test.展开更多
The mass transfer between heavy oil and liquid carbon dioxide and the changes of the heavy phase(mixture of heavy oil and CO_2) and light phase(pure CO_2) in the mixture were tested in lab with heavy oil samples from ...The mass transfer between heavy oil and liquid carbon dioxide and the changes of the heavy phase(mixture of heavy oil and CO_2) and light phase(pure CO_2) in the mixture were tested in lab with heavy oil samples from Russia. The experimental results showed that the heavy oil hardly expanded when the concentration of carbon dioxide in the mixture was 10%. When the concentration of carbon dioxide was higher than 26%, the volume of the heavy phase decreased, and the viscosity of the heavy phase increased exponentially as the light components extracted from the heavy oil exceeded the carbon dioxide saturated in the heavy oil. When the concentration of carbon dioxide in the mixture was 26%, the effect of viscosity reducing to the heavy phase was the strongest. The density of the light and heavy phases, volume factor, and solubility of gas and flash viscosity of heavy phase all increased with the rise of carbon dioxide concentration in the mixture. The best concentration of carbon dioxide in the mixture was 26%, when the heavy oil expanded the most and the viscosity of the heavy phase was the lowest. When the concentration of carbon dioxide in the mixture was between 10% and 26%, the volume of the light phase was the smallest and the oil displacement effect was the best.展开更多
Ⅰ The Indexes of Detecting Oil and Gas Resources The deeply buried reservoir which in a dynamic equilibrium state has a great pressure inside, and between it and earth surface there is a great difference of pressure....Ⅰ The Indexes of Detecting Oil and Gas Resources The deeply buried reservoir which in a dynamic equilibrium state has a great pressure inside, and between it and earth surface there is a great difference of pressure. Therefore the hydrocarbon must spread and move vertically to the surface along the pressure gradient orientation. Hydrocarbons in the reservoir along some small rifts, cracks, joints and cleavages penetrate the overlying strata and seepage onto the surface. Thus the hydrocarbons become unvisble oil and gas signs. This process is called the phenomena of hydrocarbon microseepage of reservoir. Hydrocarbons microseepage in the process展开更多
The foundations of the ＂Africa rising＂ narrative may have increasingly been tested in recent months. Security concerns, the Ebola crisis in West Africa and conflict in Libya have been some of the stumbling blocks th...The foundations of the ＂Africa rising＂ narrative may have increasingly been tested in recent months. Security concerns, the Ebola crisis in West Africa and conflict in Libya have been some of the stumbling blocks the continent has had to face. These have continuously challenged its ability to respond to events that could derail the past years＇ economic growth. The impact of lower oil prices particularly could be a major shock to the region, especially for oilexporting countries.展开更多
Aimed at the current treatment status of the polymer-flooding wastewater in Bohai oilfield, electrochemical technology used for polymer-degradation and oil-removal was researched. It formed the process flow of cyclone...Aimed at the current treatment status of the polymer-flooding wastewater in Bohai oilfield, electrochemical technology used for polymer-degradation and oil-removal was researched. It formed the process flow of cyclone mixed dosing → electrochemical removal oil → inclined tube removal oil → walnut shell filter, and a set of skid mounted wastewater containing polymer treatment plant was designed and manufactured, which was used for the field test of electrochemical treatment of wastewater containing polymer in offshore oilfield. The result shows that the oil removal rate of the electrochemical treatment process is over 98%, and the synergistic effect is significant especially used in conjunction with water clarifier of BHQ-04. When the amount of water clarifier is 50 - 150 mg/L, the oil content, the median particle diameter and the suspended solids content of the filtered water is 8 - 18 mg/L, 1.9 - 2.26 μm and 1.39 - 2.04 mg/L respectively, which reach the scene water quality standards for water injection.展开更多
This paper proposes an effective method for early diagnosis (stress concentrating) of the oil-gas pipeline. Based on the principle of electromagnetic induction Faraday, we have designed and realized the nondestructive...This paper proposes an effective method for early diagnosis (stress concentrating) of the oil-gas pipeline. Based on the principle of electromagnetic induction Faraday, we have designed and realized the nondestructive testing system for stress concentration area of ferromagnetic materials by means of the research of metal materials inverse magnetostrictive effect mechanism. The system changes the influence degree of the stress in ferromagnetic materials’ magnetic conductance to the corresponding voltage array by using discrete wavelet analysis method to process the data, in which not only the measuring accuracy is improved, but also the stress concentration is more directly reflected. The experiments confirm that the electromagnetic stress testing method is feasible and valid.展开更多
With the increasing demand for oil, the state and related enterprises attach more and more importance to the oil exploitation. As we all know, the most important link in oil production is downhole operation. In downho...With the increasing demand for oil, the state and related enterprises attach more and more importance to the oil exploitation. As we all know, the most important link in oil production is downhole operation. In downhole operation, the oil test is the most important part. In recent years, with the development of science and technology in China and the increase of oil demand, higher requirements are put forward for the oil test technology in China's oil exploitation technology. With the continuous exploitation of oil, the complex geological characteristics of oil fields and other factors, it is urgent to further improve the oil test technology in oil recovery technology. In this paper, based on the actual construction situation of oil test work in China at the present stage, combined with the current existing oil test technology, the oil test technology of China's future petroleum technology is analyzed.展开更多
A physical model test has been conducted to study the oil diffusion from the submarine pipeline under water flow.The crude oil in the flume is spilled from a leakage point of the pipeline and diffused from the seabed ...A physical model test has been conducted to study the oil diffusion from the submarine pipeline under water flow.The crude oil in the flume is spilled from a leakage point of the pipeline and diffused from the seabed to the surface. By the non-contact optical measuring technology, an image acquisition and data analysis system is designed to explore the spilled mechanism and characteristic. The oil trajectory, velocity and the rising time to the surface are obtained through this system. The influence of the water flow and the spilled discharge on the behavior of the spilled oil are analyzed from both qualitative and quantitative perspectives. The sensitivity study of the characteristic physical quantities to various factors are presented afterward. The spilled oil under water is mainly distributed in the form of the scattered particles with different sizes. The rising process of the oil can be divided into three stages: full, dispersion and aggregation period. The spilled discharge is the primary factor affecting the rising time of the oil particles. In the rising process of the oil particles, the vertical velocity of the oil is mainly affected by the spilled discharge, and the transverse velocity is more dependent on the water velocity. The deviation of the transverse oil velocity is much larger than that of the rising time and the vertical oil velocity. The study can provide a theoretical reference for the prediction system of oil spill emergency.展开更多
The purpose of this article is to show a metallographic analysis of an underground pipeline taken out of operation upon failure. The pipeline had an 8.89 cm (3.5”) diameter and a 7 mm thickness. The study was based o...The purpose of this article is to show a metallographic analysis of an underground pipeline taken out of operation upon failure. The pipeline had an 8.89 cm (3.5”) diameter and a 7 mm thickness. The study was based on a 45 cm long pipe sample, visibly and entirely corroded, with a fish-mouth crack along its length. The work contributes to finding new ways to prevent structural failure, which has high-impact consequences from the point of view of production, damage to property, pollution, and risks to human live. Through this analysis the knowledge on behavior of failures in terrestrial ducts has been extended. Development of the research included metallographic, chemical, and mechanical tests on the sample in order to know the composition of the material, its strength and its physical conditions upon taking it out of operation. After the analysis of the laboratory tests, the physical and chemical features were compared to existing national and international regulations, which allowed a specific characterization of the conditions of the sample. In accordance with the regulations, the grade of the pipe was between ×65 and ×70. Tensile testing was carried out to obtain mechanical properties in order to corroborate the grade of pipeline steel and complement the metallographic analysis.展开更多
In this article, the viscosity-temperature characteristics of W/O waxy crude oil emulsion under different microstructures were studied, and the characteristics of the microstructure were described by the analysis of t...In this article, the viscosity-temperature characteristics of W/O waxy crude oil emulsion under different microstructures were studied, and the characteristics of the microstructure were described by the analysis of the dispersed phase parameters including the average particle size, the degree of dispersion, and the nonuniformity of average particle size. On this basis, we discuss the effects of temperature, shear rate and the microstructure on the apparent viscosity of Daqing crude oil emulsion. The results showed that with the increasing of stirring speed, the number of droplets and the degree of dispersion phase dispersion increased, average droplet size and nonuniformity of average particle size reduced;the average particle size of the dispersed phase decreased by 0.5 μm, and the abnormal point increased by about 1°C. For emulsions with the same microstructure, as the temperature or shear rate rising, the rate and percentage of the reduction in apparent viscosity decreased. At the same temperature or shear rate, the reduction rate in apparent viscosity increases with the average particle size of dispersed phase decreases, in contrast to the percentage of reduction in apparent viscosity, which revealed a definitive correlation between average particle size of dispersed phase and the apparent viscosity in the non-Newtonian fluid that from 34°;C to 48°;C;the absolute value of Pearson’s correlation coefficient was above 0.8, which was highly negatively correlated;as the temperature rose, the absolute value of Pearson’s correlation coefficient decreased from 0.839 to 0.216.展开更多
When an oil tanker under the combined action of wind, waves and tidal current and is berthed or moored to a platform, the impact forces on the fenders and the tensile force in the mooring lines are important factors i...When an oil tanker under the combined action of wind, waves and tidal current and is berthed or moored to a platform, the impact forces on the fenders and the tensile force in the mooring lines are important factors in the studies of berthing and mooring conditions. Based on the experiment of a berthing and mooring tanker model under the action of wind, wave and tidal current in the same direction, this paper studies the allowable berthing and mooring conditions by considering the tensile forces of mooring lines and impact forces on the fenders, as well as the impact energy on the fenders. And a method has been proposed here for motion amplitude analysis. A successful method to decrease impact forces on the fenders is put forward. Blowing in wind and blowing off wind and different angles between waves and the fenders are considered in the experimental study. In the berthing tests of the tanker model, the impact forces are measured and the impact energy is calculated, then the berthing conditions are determined. In the mooring tests of the tanker model, the mooring line tensile forces and impact forces are measured, and the allowable mooring conditions are given that will be useful to engineering design.展开更多
The main objective of this study is to develop a new protocol for bench-scale dispersant effectiveness testing adapted for subsea dispersants injection (SSDI). The new approach includes turbulence conditions, dispersa...The main objective of this study is to develop a new protocol for bench-scale dispersant effectiveness testing adapted for subsea dispersants injection (SSDI). The new approach includes turbulence conditions, dispersant injection techniques and quantification of effectiveness, more representative for a SSDI operation. Results from the new system are compared to dispersant effectiveness measured with established laboratory methods, used for screening dispersants for surface application. The most significant result is that the dispersant ranking obtained with the new test relevant for subsea releases was very different compared to the ranking obtained by screening methods used for surface application of dispersants. This strongly indicates that existing standard methods for dispersant effectiveness testing designed for simulating conditions relevant for surface application of dispersants, are less relevant for SSDI effectiveness testing and justify the need for a more relevant method. Such a Dispersant Injection Effectiveness Test (DIET) is suggested and documented in this study.展开更多
To study the mechanism of burnt damage of oil film bearing in high-speed wire rolling mill,reasonable tempera- ture sensors are designed and calibrated,pressure block of rolling mill has been transformed into pressure...To study the mechanism of burnt damage of oil film bearing in high-speed wire rolling mill,reasonable tempera- ture sensors are designed and calibrated,pressure block of rolling mill has been transformed into pressure sensors.Online tempera- ture and load of oil film bearing in a domestic precision rolling F15 have been tested.Consequently,a large sum of valuable test data was obtained.The distributions rules of pressure and temperature under continuous online rolling state are recorded in detail. Theoretical and experimental results are beneficial to damage mechanism of oil film bearing,thus its service life could be pro- longed.Moreover,such results could provide an important reference for online test and control.展开更多
文摘By reviewing the development of “three-high” oil and gas well testing technology of Sinopec in recent years, this paper systematically summarizes the application of “three-high” oil and gas well testing technology of Sinopec in engineering optimization design technology, and high temperature and high pressure testing technology, high pressure and high temperature transformation completion integration technology. Major progress has been made in seven aspects: plug removal and re-production technology of production wells in high acid gas fields;wellbore preparation technology of ultra-deep, high-pressure, and high-temperature oil and gas wells;surface metering technology;and supporting tool development technology. This paper comprehensively analyzes the challenges faced by the “three-high” oil and gas well production testing technology in four aspects: downhole tools, production testing technology, safe production testing, and the development of low-cost production test tools. Four development directions are put forward: 1) Improve ultra-deep oil and gas testing technology and strengthen integrated geological engineering research. 2) Deepen oil and gas well integrity evaluation technology to ensure the life cycle of oil and gas wells. 3) Carry out high-end, customized, and intelligent research on oil test tools to promote the low-cost and efficient development of ultra deep reservoirs. 4) Promote the fully automatic control of the surface metering process to realize the safe development of “three-high” reservoirs.
基金Supported by the National Key Basic Research and Development Program(973 Program),China(2015CB251205)
文摘During deep water oil well testing, the low temperature environment is easy to cause wax precipitation, which affects the normal operation of the test and increases operating costs and risks. Therefore, a numerical method for predicting the wax precipitation region in oil strings was proposed based on the temperature and pressure fields of deep water test string and the wax precipitation calculation model. And the factors affecting the wax precipitation region were analyzed. The results show that: the wax precipitation region decreases with the increase of production rate, and increases with the decrease of geothermal gradient, increase of water depth and drop of water-cut of produced fluid, and increases slightly with the increase of formation pressure. Due to the effect of temperature and pressure fields, wax precipitation region is large in test strings at the beginning of well production. Wax precipitation region gradually increases with the increase of shut-in time. These conclusions can guide wax prevention during the testing of deep water oil well, to ensure the success of the test.
文摘The mass transfer between heavy oil and liquid carbon dioxide and the changes of the heavy phase(mixture of heavy oil and CO_2) and light phase(pure CO_2) in the mixture were tested in lab with heavy oil samples from Russia. The experimental results showed that the heavy oil hardly expanded when the concentration of carbon dioxide in the mixture was 10%. When the concentration of carbon dioxide was higher than 26%, the volume of the heavy phase decreased, and the viscosity of the heavy phase increased exponentially as the light components extracted from the heavy oil exceeded the carbon dioxide saturated in the heavy oil. When the concentration of carbon dioxide in the mixture was 26%, the effect of viscosity reducing to the heavy phase was the strongest. The density of the light and heavy phases, volume factor, and solubility of gas and flash viscosity of heavy phase all increased with the rise of carbon dioxide concentration in the mixture. The best concentration of carbon dioxide in the mixture was 26%, when the heavy oil expanded the most and the viscosity of the heavy phase was the lowest. When the concentration of carbon dioxide in the mixture was between 10% and 26%, the volume of the light phase was the smallest and the oil displacement effect was the best.
文摘Ⅰ The Indexes of Detecting Oil and Gas Resources The deeply buried reservoir which in a dynamic equilibrium state has a great pressure inside, and between it and earth surface there is a great difference of pressure. Therefore the hydrocarbon must spread and move vertically to the surface along the pressure gradient orientation. Hydrocarbons in the reservoir along some small rifts, cracks, joints and cleavages penetrate the overlying strata and seepage onto the surface. Thus the hydrocarbons become unvisble oil and gas signs. This process is called the phenomena of hydrocarbon microseepage of reservoir. Hydrocarbons microseepage in the process
文摘The foundations of the ＂Africa rising＂ narrative may have increasingly been tested in recent months. Security concerns, the Ebola crisis in West Africa and conflict in Libya have been some of the stumbling blocks the continent has had to face. These have continuously challenged its ability to respond to events that could derail the past years＇ economic growth. The impact of lower oil prices particularly could be a major shock to the region, especially for oilexporting countries.
文摘Aimed at the current treatment status of the polymer-flooding wastewater in Bohai oilfield, electrochemical technology used for polymer-degradation and oil-removal was researched. It formed the process flow of cyclone mixed dosing → electrochemical removal oil → inclined tube removal oil → walnut shell filter, and a set of skid mounted wastewater containing polymer treatment plant was designed and manufactured, which was used for the field test of electrochemical treatment of wastewater containing polymer in offshore oilfield. The result shows that the oil removal rate of the electrochemical treatment process is over 98%, and the synergistic effect is significant especially used in conjunction with water clarifier of BHQ-04. When the amount of water clarifier is 50 - 150 mg/L, the oil content, the median particle diameter and the suspended solids content of the filtered water is 8 - 18 mg/L, 1.9 - 2.26 μm and 1.39 - 2.04 mg/L respectively, which reach the scene water quality standards for water injection.
文摘This paper proposes an effective method for early diagnosis (stress concentrating) of the oil-gas pipeline. Based on the principle of electromagnetic induction Faraday, we have designed and realized the nondestructive testing system for stress concentration area of ferromagnetic materials by means of the research of metal materials inverse magnetostrictive effect mechanism. The system changes the influence degree of the stress in ferromagnetic materials’ magnetic conductance to the corresponding voltage array by using discrete wavelet analysis method to process the data, in which not only the measuring accuracy is improved, but also the stress concentration is more directly reflected. The experiments confirm that the electromagnetic stress testing method is feasible and valid.
文摘With the increasing demand for oil, the state and related enterprises attach more and more importance to the oil exploitation. As we all know, the most important link in oil production is downhole operation. In downhole operation, the oil test is the most important part. In recent years, with the development of science and technology in China and the increase of oil demand, higher requirements are put forward for the oil test technology in China's oil exploitation technology. With the continuous exploitation of oil, the complex geological characteristics of oil fields and other factors, it is urgent to further improve the oil test technology in oil recovery technology. In this paper, based on the actual construction situation of oil test work in China at the present stage, combined with the current existing oil test technology, the oil test technology of China's future petroleum technology is analyzed.
基金The National Natural Science Foundation of China under contract No.51609168the Science and Technology Program of CNOOC Limited under contract No.YXKY-2016-2Y-07+2 种基金the Open Fund of State Key Laboratory of Coastal and Offshore Engineering under contract No.LP1608the National Basic Research Program(973 Program)of China under contract No.2014CB046804the National Science and Technology Major Project under contract No.2016ZX05057020
文摘A physical model test has been conducted to study the oil diffusion from the submarine pipeline under water flow.The crude oil in the flume is spilled from a leakage point of the pipeline and diffused from the seabed to the surface. By the non-contact optical measuring technology, an image acquisition and data analysis system is designed to explore the spilled mechanism and characteristic. The oil trajectory, velocity and the rising time to the surface are obtained through this system. The influence of the water flow and the spilled discharge on the behavior of the spilled oil are analyzed from both qualitative and quantitative perspectives. The sensitivity study of the characteristic physical quantities to various factors are presented afterward. The spilled oil under water is mainly distributed in the form of the scattered particles with different sizes. The rising process of the oil can be divided into three stages: full, dispersion and aggregation period. The spilled discharge is the primary factor affecting the rising time of the oil particles. In the rising process of the oil particles, the vertical velocity of the oil is mainly affected by the spilled discharge, and the transverse velocity is more dependent on the water velocity. The deviation of the transverse oil velocity is much larger than that of the rising time and the vertical oil velocity. The study can provide a theoretical reference for the prediction system of oil spill emergency.
文摘The purpose of this article is to show a metallographic analysis of an underground pipeline taken out of operation upon failure. The pipeline had an 8.89 cm (3.5”) diameter and a 7 mm thickness. The study was based on a 45 cm long pipe sample, visibly and entirely corroded, with a fish-mouth crack along its length. The work contributes to finding new ways to prevent structural failure, which has high-impact consequences from the point of view of production, damage to property, pollution, and risks to human live. Through this analysis the knowledge on behavior of failures in terrestrial ducts has been extended. Development of the research included metallographic, chemical, and mechanical tests on the sample in order to know the composition of the material, its strength and its physical conditions upon taking it out of operation. After the analysis of the laboratory tests, the physical and chemical features were compared to existing national and international regulations, which allowed a specific characterization of the conditions of the sample. In accordance with the regulations, the grade of the pipe was between ×65 and ×70. Tensile testing was carried out to obtain mechanical properties in order to corroborate the grade of pipeline steel and complement the metallographic analysis.
文摘In this article, the viscosity-temperature characteristics of W/O waxy crude oil emulsion under different microstructures were studied, and the characteristics of the microstructure were described by the analysis of the dispersed phase parameters including the average particle size, the degree of dispersion, and the nonuniformity of average particle size. On this basis, we discuss the effects of temperature, shear rate and the microstructure on the apparent viscosity of Daqing crude oil emulsion. The results showed that with the increasing of stirring speed, the number of droplets and the degree of dispersion phase dispersion increased, average droplet size and nonuniformity of average particle size reduced;the average particle size of the dispersed phase decreased by 0.5 μm, and the abnormal point increased by about 1°C. For emulsions with the same microstructure, as the temperature or shear rate rising, the rate and percentage of the reduction in apparent viscosity decreased. At the same temperature or shear rate, the reduction rate in apparent viscosity increases with the average particle size of dispersed phase decreases, in contrast to the percentage of reduction in apparent viscosity, which revealed a definitive correlation between average particle size of dispersed phase and the apparent viscosity in the non-Newtonian fluid that from 34°;C to 48°;C;the absolute value of Pearson’s correlation coefficient was above 0.8, which was highly negatively correlated;as the temperature rose, the absolute value of Pearson’s correlation coefficient decreased from 0.839 to 0.216.
文摘When an oil tanker under the combined action of wind, waves and tidal current and is berthed or moored to a platform, the impact forces on the fenders and the tensile force in the mooring lines are important factors in the studies of berthing and mooring conditions. Based on the experiment of a berthing and mooring tanker model under the action of wind, wave and tidal current in the same direction, this paper studies the allowable berthing and mooring conditions by considering the tensile forces of mooring lines and impact forces on the fenders, as well as the impact energy on the fenders. And a method has been proposed here for motion amplitude analysis. A successful method to decrease impact forces on the fenders is put forward. Blowing in wind and blowing off wind and different angles between waves and the fenders are considered in the experimental study. In the berthing tests of the tanker model, the impact forces are measured and the impact energy is calculated, then the berthing conditions are determined. In the mooring tests of the tanker model, the mooring line tensile forces and impact forces are measured, and the allowable mooring conditions are given that will be useful to engineering design.
文摘The main objective of this study is to develop a new protocol for bench-scale dispersant effectiveness testing adapted for subsea dispersants injection (SSDI). The new approach includes turbulence conditions, dispersant injection techniques and quantification of effectiveness, more representative for a SSDI operation. Results from the new system are compared to dispersant effectiveness measured with established laboratory methods, used for screening dispersants for surface application. The most significant result is that the dispersant ranking obtained with the new test relevant for subsea releases was very different compared to the ranking obtained by screening methods used for surface application of dispersants. This strongly indicates that existing standard methods for dispersant effectiveness testing designed for simulating conditions relevant for surface application of dispersants, are less relevant for SSDI effectiveness testing and justify the need for a more relevant method. Such a Dispersant Injection Effectiveness Test (DIET) is suggested and documented in this study.
基金Funded by the Natural Science Foundation of China(50575155)Shanxi younger science foundation(20031041).
文摘To study the mechanism of burnt damage of oil film bearing in high-speed wire rolling mill,reasonable tempera- ture sensors are designed and calibrated,pressure block of rolling mill has been transformed into pressure sensors.Online tempera- ture and load of oil film bearing in a domestic precision rolling F15 have been tested.Consequently,a large sum of valuable test data was obtained.The distributions rules of pressure and temperature under continuous online rolling state are recorded in detail. Theoretical and experimental results are beneficial to damage mechanism of oil film bearing,thus its service life could be pro- longed.Moreover,such results could provide an important reference for online test and control.
