AASHTO’s guideline for geometric design of highways and similar guidelines require that roadside areas on the inside of horizontal curves be cleared of high objects to provide stopping sight distance. The guidelines ...AASHTO’s guideline for geometric design of highways and similar guidelines require that roadside areas on the inside of horizontal curves be cleared of high objects to provide stopping sight distance. The guidelines have analytical models for determining the extent of clearance, known as the horizontal sightline offset or clearance offset, for simple curves. Researchers in the past have developed analytical models for clearance offsets for spiraled and reverse curves. Very few researchers developed analytical models for available sight distances for compound curves. Still missing are models for horizontal sightline offsets and locations of the offsets for compound curves. The objective of this paper is to present development of analytical models and charts for determining horizontal sightline offsets and their locations for compound curves. The paper considers curves whose component arcs are individually shorter than stopping sight distance. The resulting models and the charts have been verified with accurate values determined using graphical methods. The models and the charts will find application in geometric design of highway compound curves.展开更多
The levered-dual response(LEDAR)Coulomb-damped system attains near resonant vibration isolation by differential preloads/offsets in linear springs.It takes the advantages of both the preloads/offsets in linear springs...The levered-dual response(LEDAR)Coulomb-damped system attains near resonant vibration isolation by differential preloads/offsets in linear springs.It takes the advantages of both the preloads/offsets in linear springs and the guiderail friction for realizing different levels of vibration isolation.The isolation capacities are investigated on the strategies with both the horizontal and vertical guiderails,with the horizontal rail only,and without guiderails.The compressive preloads generally result in the consumption of most of the initial excitation energy so as to overcome the potential threshold.The isolation onsets at the frequency ratio of 1∓0.095 on the left-hand side(LHS)and the right-hand side(RHS)of the lever are relative to the load plate connector.The observed near resonant isolation thus makes the LEDAR system a candidate for the isolation of the mechanical systems about resonance while opening a path for simultaneous harvesterisolation functions and passive functions at extreme frequencies.展开更多
Lateral clearance on the inside of horizontal curves is required by all geometric design guidelines in order to provide at least stopping sight distance. There already exist graphical models, analytical models, and de...Lateral clearance on the inside of horizontal curves is required by all geometric design guidelines in order to provide at least stopping sight distance. There already exist graphical models, analytical models, and design charts for determining minimum clearance offsets to meet the requirement. Some of these models determine the offsets based on constant design sight distance values on the assumption that drivers negotiate horizontal curves at constant speed. Therefore, those models are suitable for sites where there is no difference in speeds between tangent and curved sections. Past studies have reported that there are sites where drivers decelerate on entering horizontal curves and accelerate on departing from the curves. At those sites stopping sight distance for a given driver varies with driver location due to variable speed. This paper presents an analytical model and a chart for determining minimum offsets needed to provide desired sight distances at horizontal curves with variable operating speeds. At those sites the offsets yield roadside clearance boundaries that have transition arcs with performances that are similar to those of elliptical arcs. Therefore, practitioners may choose to use elliptical equations or equations and the chart developed herein. Results of this study will be of value to practitioners in the area of roadside design.展开更多
Emissions trading schemes(ETSs)have been a central component of international climate change policies,as a carbon pricing tool to achieve emissions reduction targets.Forest carbon offset credits have been leveraged in...Emissions trading schemes(ETSs)have been a central component of international climate change policies,as a carbon pricing tool to achieve emissions reduction targets.Forest carbon offset credits have been leveraged in many ETSs to efficiently meet emission reduction targets,yet there is little knowledge about the perceptions,experiences,and challenges associated with the forest carbon offsetting in existing and pilot ETS.Given that the future inclusion of forest carbon offset in ETS management activities and policies will require strong support and acceptability among the institutions and experts involved in ETS,this study explores the experiences and lessons learned with 16 globally engaging experts representing major existing ETSs(North America,Europe,and New Zealand)and Chinese pilot ETSs towards the inclusion of forestry offsets,major concerns and challenges with existing implementation models.Findings revealed that many respondents particularly from North America,New Zealand,and Chinese pilot systems portrayed positive attitudes toward the inclusion of forestry carbon offsets and its role in contributing to a viable ETS,while European experts were not supportive.Respondents cited leakage,permanence,additionality,and monitoring design features as the major challenges and concerns that inhibit the expansion and inclusion of forest carbon offsetting.Respondents from Chinese pilot schemes referenced a unique set of challenges related to implementation,including the increasing cost of afforestation and reforestation projects,the uncertainty in the future supply and demand for their national Certified Emissions Reduction(CER)scheme and landowner engagement.Existing and future ETSs should learn from and address the challenges experienced by global experts and carbon pricing mechanisms to design,evaluate,or enhance their forest carbon offset programs for an effective and viable system that successfully contributes to GHG mitigation practices globally.We recommend inclusion of forest carbon offsets at the early stages of ETS improves the perceptions and experience of policy makers and practitioners toward the success and potential of forestry offsets in ETS ensuring familiarity and confidence in the mechanism.展开更多
The Mw 9.0 Tohoku-Oki earthquake that hit the mainland Japan on 11 th March, 2011 had resulted a devastating Tsunami due to an active thrusting between the Pacific and the North American Plates. Static and kinematic o...The Mw 9.0 Tohoku-Oki earthquake that hit the mainland Japan on 11 th March, 2011 had resulted a devastating Tsunami due to an active thrusting between the Pacific and the North American Plates. Static and kinematic offsets at the offshore epicentre of the Mw 9.0 event remain unanswered and being investigated along with their near and far field limiting distances from the epicentre. Accordingly, offset measurements from 60 continuously operating IGS and GEONET GNSS stations were radially classified from the epicentre and interpreted with analytical models to find their linear offset decay rates. Co-and post-seismic static positional anomaly offsets of sixty days show almost all near field stations had strong or appreciable eastward or south eastward static shifts. Near stations(<250 km) showed both kinematic and static offsets. GEONET station ’0175’ showed maximum resultant static offset of-4.5 m, which diminishes approximately 1-2 cm at far sites like SMST and AIRA. Characteristic decay duration(’b’) of the mean kinematic co-seismic shift(’a’)of near field stations was 17.28 s during earthquake hours with an EW component shift >1.5 m. Spatial models of projected N-S static and kinematic offsets show their asymmetrical distributions around the epicentre with maximum model offset of-1.84 m displaced towards south at-45 km north of the epicentre. The Tohoku-Oki earthquake produced a resultant kinematic offset of-10.2 m towards East at its offshore epicentre;while the estimated near field static offset is ~9.82 m. However, both estimates are bigger than double the resultant offset measured value(~4.3 m) in the Japanese mainland using GPS. The difference in the kinematic and static near field offsets highlight that the near surface had elastic or in-elastic kinematic strain dissipation as against the lithospheric level viscoelastic static response, which resulted rapid kinematic strain release(1.12 cm/km)within the limiting radius of ~220 km from the Tohoku-Oki epicentre.展开更多
The correction for antenna phase center is considered in processing Global Positioning System （GPS） data collected from a network of GPS ultra-short baselines. Compared with the leveling measurements, the GPS result...The correction for antenna phase center is considered in processing Global Positioning System （GPS） data collected from a network of GPS ultra-short baselines. Compared with the leveling measurements, the GPS results show that the relative vertical offsets for the pairs of GPS receiver antenna phase centers still exist, although absolute calibration of the antenna phase center variations （PCVs） has been considered. With respect to the TPS CR.G3 antenna, the relative vertical offset for the LEI AT504 antenna is 8.4 mm, the offset for the ASH701945C_M antenna is 5.5 mm, and those for the ASHY00936E_C and ASH701945B_M antennas are approximately between 2 mm and -3 mm. The relative offsets for the same type of antennas are approximately 1 mm. By correcting the absolute PCVs, the existing relative offset becomes negligible for horizontal positioning.展开更多
The valence band offsets of the strained and longitudinally relaxed diamond/cubic boron-nitride （c-BN） （110） superlattice are investigated by the plane wave density functional theory approach and using the on-site...The valence band offsets of the strained and longitudinally relaxed diamond/cubic boron-nitride （c-BN） （110） superlattice are investigated by the plane wave density functional theory approach and using the on-site core electron as a reference energy level. For the strained diamond/c-BN superlattice, the valence band offset of around 1.50 eV is in good agreement with those using all the electrons methods. As for the longitudinally relaxed superlattice, the valence band offset of around 1.28 eV is smaller than that of the strained superlattice. The reason for this is mainly due to the split of the valence band maximum caused by the anisotropic strain.展开更多
This study investigates how frequency offsets of multitone jamming affect the fast frequencyhopped binary frequency shift keying （FFH/BFSK） self-normalizing （SNZ） receiver under additive white Gaussian noise （AWG...This study investigates how frequency offsets of multitone jamming affect the fast frequencyhopped binary frequency shift keying （FFH/BFSK） self-normalizing （SNZ） receiver under additive white Gaussian noise （AWGN）. The average bit-error-rate （BER） expressions of the FFH/BFSK SNZ receiver and the average BER expressions of an FFH/BFSK spread-spectrum （SS） communication system with frequency offsets of multitone jamming for the sake of understanding the simulation results better. Simulation results show that BER performance of the FFH/BFSK SNZ receiver with diversity under the worst case multitone jamming （MTJ） and AWGN suffers from multitone jamming＇s frequency offsets when the jamming power is moderate, which is validated by several simulations with different frequency offsets configured in multitone jamming. Therefore, an FFH/BFSK SNZ receiver under multitone jamming can be combated with the help of frequency offsets of multitone jamming.展开更多
Cd1-xZnxS/Cu2ZnSnS4 （CZTS）-based thin film solar cells usually use CdS as a buffer layer, but due to its smaller band gap （2.4 eV）, CdS film has been replaced with higher band gap materials. The cadmium zinc sulfi...Cd1-xZnxS/Cu2ZnSnS4 （CZTS）-based thin film solar cells usually use CdS as a buffer layer, but due to its smaller band gap （2.4 eV）, CdS film has been replaced with higher band gap materials. The cadmium zinc sulfide （CdZnS） ternary compound has a higher band gap than other compounds, which leads to a decrease in window absorption loss. In this paper, the band offsets at Cd1-xZnxS/CuzZnSnS4 （CZTS） heterointerface are calculated by the first-principles, density- functional and pseudopotential method. The band offsets at Cdl xZnxS/CZTS heterointerface are tuned by controlling the composition of Zn in Cd1-xZnxS alloy, the calculated valence band offsets are small, which is consistent with the commonanion rule. The favorable heterointerface of type-I with a moderate barrier height （〈 0.3 eV） can be obtained by controlling the composition of Zn in Cdl-xZnxS alloy between 0.25 and 0.375.展开更多
The problem of estimating the carrier frequency offsets in Multiple-Input Multiple-Output (MIMO) systems with distributed transmit antennas is addressed. It is supposed that the transmit antennas are distributed while...The problem of estimating the carrier frequency offsets in Multiple-Input Multiple-Output (MIMO) systems with distributed transmit antennas is addressed. It is supposed that the transmit antennas are distributed while the receive antennas are still centralized, and the general case where both the time delays and the frequency offsets are possibly different for each transmit antenna is considered. The channel is supposed to be frequency flat, and the macroscopic fading is also taken into consideration. A carrier frequency offset estimator based on Maximum Likelihood (ML) is proposed, which can separately estimate the frequency offset for each transmit antenna and exploit the spatial diversity. The Cramer-Rao Bound (CRB) for synchronous MIMO (i.e., the time delays for each transmit antenna are all equal) is also derived. Simulation results are given to illustrate the per- formance of the estimator and compare it with the CRB. It is shown that the estimator can provide satisfactory frequency offset estimates and its performance is close to the CRB for the Signal-to-Noise Ratio (SNR) below 20dB.展开更多
Serpentine nozzles are widely used in combat aircraft to realize strong stealth characteristics.Based on the layout characteristics within a confined space,a series of double serpentine nozzles with spanwise offsets a...Serpentine nozzles are widely used in combat aircraft to realize strong stealth characteristics.Based on the layout characteristics within a confined space,a series of double serpentine nozzles with spanwise offsets are established.Using computational fluid dynamics and Taguchi method,the influence mechanisms of the Distribution of Area(DA),Distributions of Centerline for the first and second‘S’sections in the Vertical direction(DCV1 and DCV2),and Distribution of Centerline in the Spanwise direction(DCS)are analyzed.The impact of these factors on the total pressure recovery coefficient can be ranked as DA>DCV2>DCS>DCV1,whereas their impacts on the discharge coefficient and axial thrust coefficient can be ranked as DCV2>DCS>DA>DCV1.Considering the statistical significance of these factors,a nozzle in which DA changes rapidly at the exit and DCV1,DCV2,and DCS change rapidly at the entrance gives the best aerodynamic performance.Compared to the worst configuration,the total pressure recovery coefficient,discharge coefficient,and axial thrust coefficient are improved by 1.6%,3.5%and 3.6%,respectively.DA influences the gas flow acceleration in the entire serpentine channel,resulting in different wall shear stress and friction losses.The various centerline distributions influence the gas flow acceleration effects and form complex wave structures in the constantarea extension section,resulting in different local and friction losses.展开更多
As one of the most important geometric parameters for a PC-type fiber connector end face, apex offset can contribute to high insertion loss and high back-reflection reading. A novel measurement method for the paramete...As one of the most important geometric parameters for a PC-type fiber connector end face, apex offset can contribute to high insertion loss and high back-reflection reading. A novel measurement method for the parameter, connector rotating-π method, is proposed. With the method, the apex offset of a common connector end face is measured. The result is compared with that measured by a Norland 3000 fiber connector end face interferometer. It is found that the difference between two results is 1.8μm. Meantime, the influences of relevant error resources on apex offset measurement under rotating-π method and apex-core method are respectively analyzed, and two error equations are derived. The analytical result shows that, compared with apex-core method, if two additional sub-tilts of axis within and in the direction perpendicular to principal plane caused by its rotation are not bigger than the original axis tilt angle, the max. measurement error will then be reduced by at least 22.5% with rotating-π method. The practicability of the method is confirmed by the experiments.展开更多
Band offset in semiconductors is a fundamental physical quantity that determines the performance of optoelectronic devices.However,the current method of calculating band offset is difficult to apply directly to the la...Band offset in semiconductors is a fundamental physical quantity that determines the performance of optoelectronic devices.However,the current method of calculating band offset is difficult to apply directly to the large-lattice-mismatched and heterovalent semiconductors because of the existing electric field and large strain at the interfaces.Here,we proposed a modified method to calculate band offsets for such systems,in which the core energy level shifts caused by heterovalent effects and lattice mismatch are estimated by interface reconstruction and the insertion of unidirectional strain structures as transitions,respectively.Taking the Si and III-V systems as examples,the results have the same accuracy as what is a widely used method for small-lattice-mismatched systems,and are much closer to the experimental values for the large-lattice-mismatched and heterovalent systems.Furthermore,by systematically studying the heterojunctions of Si and III-V semiconductors along different directions,it is found that the band offsets of Si/InAs and Si/InSb systems in[100],[110]and[111]directions belong to the type I,and could be beneficial for silicon-based luminescence performance.Our study offers a more reliable and direct method for calculating band offsets of large-lattice-mismatched and heterovalent semiconductors,and could provide theoretical support for the design of the high-performance silicon-based light sources.展开更多
Abstract： Amorphous LazHf2O7 films were grown on Si（100） by pulsed laser deposition method. The valence and conduction band offsets between amorphous La2Hf2O7 film and silicon were determined by using synchrotron r...Abstract： Amorphous LazHf2O7 films were grown on Si（100） by pulsed laser deposition method. The valence and conduction band offsets between amorphous La2Hf2O7 film and silicon were determined by using synchrotron radiation photoemission spectroscopy. The energy band gap of amorphous La2Hf2O7 film was measured from the energy-loss spectra of O ls photoelectrons. The band gap of amorphous LazHf2O7 film was determined to be 5.4±0.2 eV. The valence and the conduction-band offsets of amorphous La2Hf2O7 film to Si were obtained to be 2.7±0.2 and 1.6±0.2 eV, respectively. These results indieated that the amorphous La2Hf2O7 film could be one promising candidate for high-k gate dielectrics.展开更多
A method, which can predict the valence band offsets at strained layer heterojunctions under different strain situations only by calculating band structures and deformation parameters of the bulk materials, is suggest...A method, which can predict the valence band offsets at strained layer heterojunctions under different strain situations only by calculating band structures and deformation parameters of the bulk materials, is suggested. The applicability of this method is verified by calculation of the valence band offsets at strained layer heterojuntions ,such as InP/InAs, InP/GaP, GaAs/InAs, GaP/GaAs and AlAs/InAs with various strain conditions.展开更多
Design guidelines require that high objects on the inside of horizontal curves be cleared so as to provide sufficient sight distance. An example of the guidelines that require such clearance is the AASHTO’s Green Boo...Design guidelines require that high objects on the inside of horizontal curves be cleared so as to provide sufficient sight distance. An example of the guidelines that require such clearance is the AASHTO’s Green Book. The Green Book has an analytical model for determining minimum clearance for a given design sight distance. The model is well suited for middle sections of long curves. Applying such clearance to sections near beginnings and ends of the curves and to sections where there is reverse of curvature will result in over-clearance. Over-clearance implies extra cost of earthwork where highways pass in cut zones. To avoid such extra costs the guideline suggests using the graphical method to determine exact clearance offsets. The graphical method is accurate but it is also tedious and time consuming. This study developed analytical models for efficiently determining clearance offsets that match the offsets determined with the graphical method. The offsets are ordinates from driver paths to flat roadside spirals that make the boundary of the roadside area to clear. Mathematical equations for the spirals comprise of terms related to highway speed (in the form of design sight distance), curve features, and driver locations. In turn, these terms define magnitudes of the offsets to the spirals. Combination of the terms results in many parameters to the extent of making difficult development of design charts for offsets. However, examining suitability of published offset charts for simple curves as estimates of offsets for sites with reverse curves leads to finding that the charts are suitable as long as the reverse curves have common tangents that are at least as long as 25% of design sight distance. For reverse curves with no common tangents, offset charts have been developed and presented in this paper. Practitioners can use these charts or the derived equations to determine clearance offsets for new sites as well as for existing sites that are deficient in design sight distance.展开更多
The magnetic levitation transportation system is one of the potential applications of high-Tc superconducting (HTS) maglev system. The prototype HTS magnetic levitation system is composed of one HTS bulk and a permane...The magnetic levitation transportation system is one of the potential applications of high-Tc superconducting (HTS) maglev system. The prototype HTS magnetic levitation system is composed of one HTS bulk and a permanent magnet railway (PMR). The maglev transportation system performance is influenced by the maximum levitation force, the maximum guidance force and the maximum of external applied magnetic flux density. The applied magnetic field distribution also needs to be considered carefully. In the paper, the magnetic levitation force of cylindrical HTS bulk over PMR is experimentally studied. During the experiment, symmetrical PMR and Halbach PMR are used separately. The levitation force-gap loops of different lateral offset of the HTS bulk above PMRs are obtained experimentally. The results show that the HTS bulk levitation performance is tightly relative to the external applied magnetic field distribution. The maximum magnetic levitation forces of HTS bulk above symmetrical PMR decrease linearly with the lateral offset increasing. When the lateral offset changes from 0 mm to 25 mm, the maximum magnetic levitation forces of HTS bulk above Halbach PMR increase with the lateral offset increasing. When the lateral offset exceeds the center of the Halbach PMR by 25 mm, the maximum force decreases rapidly with the increase of the lateral offset of the bulk sample.展开更多
Reducing nonradiative recombination is a main challenge in manufacturing highly efficient optoelectronic devices.Perovskite solar cells(PSCs)typically feature significant nonradiative recombination originating from en...Reducing nonradiative recombination is a main challenge in manufacturing highly efficient optoelectronic devices.Perovskite solar cells(PSCs)typically feature significant nonradiative recombination originating from energetic mismatch at the charge-extracting contact.Here,we widely manipulate the energy offset between the perovskite conduction band minimum(CBM)and the electron transporting state of the fullerene cathode interface layer in p-i-n PSCs by modifying the perovskite surface work function with defect-passivating self-assembled monolayers(SAMs)inducing surface dipoles.It is found that reducing the energy offset for electron extraction at such perovskite/fullerene electron-selective heterointerface from 0.98 to-0.02 eV yields a clear linear improvement in PSC built-in potential,with fill factor,photovoltage and power conversion efficiency all increasing as well.We further demonstrate that the improved photovoltaic performance is attributed to reduced energy offsets between the perovskite CBM and the fullerene electron accepting state,which accelerates electron extraction from perovskite and thus effectively suppresses nonradiative recombination.Moreover,the models of corresponding energy level alignment are proposed to discuss the impacts on PSC performance.Our work highlights the importance of tuning the work function even for defect-passivated perovskite surfaces to achieve barrier-less charge extraction and thus boost PSC performance.展开更多
In the light of our previous result that the average bond energy E_h valuelines up across heterojunction interfaces,in this paper,the valence-band offsets in ten hete-rojunctions have been calculated using the E_h as ...In the light of our previous result that the average bond energy E_h valuelines up across heterojunction interfaces,in this paper,the valence-band offsets in ten hete-rojunctions have been calculated using the E_h as a reference level with the LMTO-ASAband-structure method.The calculated results are in excellent agreement with those fromthe more elaborate first-principles self-consistent interface calculations.As the presentmethod requires by far the smaller computational effort,it is very convenient for usingon medium-sized computers.展开更多
文摘AASHTO’s guideline for geometric design of highways and similar guidelines require that roadside areas on the inside of horizontal curves be cleared of high objects to provide stopping sight distance. The guidelines have analytical models for determining the extent of clearance, known as the horizontal sightline offset or clearance offset, for simple curves. Researchers in the past have developed analytical models for clearance offsets for spiraled and reverse curves. Very few researchers developed analytical models for available sight distances for compound curves. Still missing are models for horizontal sightline offsets and locations of the offsets for compound curves. The objective of this paper is to present development of analytical models and charts for determining horizontal sightline offsets and their locations for compound curves. The paper considers curves whose component arcs are individually shorter than stopping sight distance. The resulting models and the charts have been verified with accurate values determined using graphical methods. The models and the charts will find application in geometric design of highway compound curves.
基金partially supported by the Nottingham Ningbo China Beacons of Excellence Research and Innovation Institute (No. I01211200001)LDS 2023 Educational Foundation of The University of Nottingham Ningbo China (No. E06221200002)
文摘The levered-dual response(LEDAR)Coulomb-damped system attains near resonant vibration isolation by differential preloads/offsets in linear springs.It takes the advantages of both the preloads/offsets in linear springs and the guiderail friction for realizing different levels of vibration isolation.The isolation capacities are investigated on the strategies with both the horizontal and vertical guiderails,with the horizontal rail only,and without guiderails.The compressive preloads generally result in the consumption of most of the initial excitation energy so as to overcome the potential threshold.The isolation onsets at the frequency ratio of 1∓0.095 on the left-hand side(LHS)and the right-hand side(RHS)of the lever are relative to the load plate connector.The observed near resonant isolation thus makes the LEDAR system a candidate for the isolation of the mechanical systems about resonance while opening a path for simultaneous harvesterisolation functions and passive functions at extreme frequencies.
文摘Lateral clearance on the inside of horizontal curves is required by all geometric design guidelines in order to provide at least stopping sight distance. There already exist graphical models, analytical models, and design charts for determining minimum clearance offsets to meet the requirement. Some of these models determine the offsets based on constant design sight distance values on the assumption that drivers negotiate horizontal curves at constant speed. Therefore, those models are suitable for sites where there is no difference in speeds between tangent and curved sections. Past studies have reported that there are sites where drivers decelerate on entering horizontal curves and accelerate on departing from the curves. At those sites stopping sight distance for a given driver varies with driver location due to variable speed. This paper presents an analytical model and a chart for determining minimum offsets needed to provide desired sight distances at horizontal curves with variable operating speeds. At those sites the offsets yield roadside clearance boundaries that have transition arcs with performances that are similar to those of elliptical arcs. Therefore, practitioners may choose to use elliptical equations or equations and the chart developed herein. Results of this study will be of value to practitioners in the area of roadside design.
基金funded by the China Green Carbon Foundation and the Faculty of Forestry,University of British Columbia。
文摘Emissions trading schemes(ETSs)have been a central component of international climate change policies,as a carbon pricing tool to achieve emissions reduction targets.Forest carbon offset credits have been leveraged in many ETSs to efficiently meet emission reduction targets,yet there is little knowledge about the perceptions,experiences,and challenges associated with the forest carbon offsetting in existing and pilot ETS.Given that the future inclusion of forest carbon offset in ETS management activities and policies will require strong support and acceptability among the institutions and experts involved in ETS,this study explores the experiences and lessons learned with 16 globally engaging experts representing major existing ETSs(North America,Europe,and New Zealand)and Chinese pilot ETSs towards the inclusion of forestry offsets,major concerns and challenges with existing implementation models.Findings revealed that many respondents particularly from North America,New Zealand,and Chinese pilot systems portrayed positive attitudes toward the inclusion of forestry carbon offsets and its role in contributing to a viable ETS,while European experts were not supportive.Respondents cited leakage,permanence,additionality,and monitoring design features as the major challenges and concerns that inhibit the expansion and inclusion of forest carbon offsetting.Respondents from Chinese pilot schemes referenced a unique set of challenges related to implementation,including the increasing cost of afforestation and reforestation projects,the uncertainty in the future supply and demand for their national Certified Emissions Reduction(CER)scheme and landowner engagement.Existing and future ETSs should learn from and address the challenges experienced by global experts and carbon pricing mechanisms to design,evaluate,or enhance their forest carbon offset programs for an effective and viable system that successfully contributes to GHG mitigation practices globally.We recommend inclusion of forest carbon offsets at the early stages of ETS improves the perceptions and experience of policy makers and practitioners toward the success and potential of forestry offsets in ETS ensuring familiarity and confidence in the mechanism.
文摘The Mw 9.0 Tohoku-Oki earthquake that hit the mainland Japan on 11 th March, 2011 had resulted a devastating Tsunami due to an active thrusting between the Pacific and the North American Plates. Static and kinematic offsets at the offshore epicentre of the Mw 9.0 event remain unanswered and being investigated along with their near and far field limiting distances from the epicentre. Accordingly, offset measurements from 60 continuously operating IGS and GEONET GNSS stations were radially classified from the epicentre and interpreted with analytical models to find their linear offset decay rates. Co-and post-seismic static positional anomaly offsets of sixty days show almost all near field stations had strong or appreciable eastward or south eastward static shifts. Near stations(<250 km) showed both kinematic and static offsets. GEONET station ’0175’ showed maximum resultant static offset of-4.5 m, which diminishes approximately 1-2 cm at far sites like SMST and AIRA. Characteristic decay duration(’b’) of the mean kinematic co-seismic shift(’a’)of near field stations was 17.28 s during earthquake hours with an EW component shift >1.5 m. Spatial models of projected N-S static and kinematic offsets show their asymmetrical distributions around the epicentre with maximum model offset of-1.84 m displaced towards south at-45 km north of the epicentre. The Tohoku-Oki earthquake produced a resultant kinematic offset of-10.2 m towards East at its offshore epicentre;while the estimated near field static offset is ~9.82 m. However, both estimates are bigger than double the resultant offset measured value(~4.3 m) in the Japanese mainland using GPS. The difference in the kinematic and static near field offsets highlight that the near surface had elastic or in-elastic kinematic strain dissipation as against the lithospheric level viscoelastic static response, which resulted rapid kinematic strain release(1.12 cm/km)within the limiting radius of ~220 km from the Tohoku-Oki epicentre.
基金supported by the Science for Earthquake Resilience(XH14070Y,XH15064Y)the China NationalSpecial Fund for Earthquake Scientific Research in Public Interest(201208009)
文摘The correction for antenna phase center is considered in processing Global Positioning System （GPS） data collected from a network of GPS ultra-short baselines. Compared with the leveling measurements, the GPS results show that the relative vertical offsets for the pairs of GPS receiver antenna phase centers still exist, although absolute calibration of the antenna phase center variations （PCVs） has been considered. With respect to the TPS CR.G3 antenna, the relative vertical offset for the LEI AT504 antenna is 8.4 mm, the offset for the ASH701945C_M antenna is 5.5 mm, and those for the ASHY00936E_C and ASH701945B_M antennas are approximately between 2 mm and -3 mm. The relative offsets for the same type of antennas are approximately 1 mm. By correcting the absolute PCVs, the existing relative offset becomes negligible for horizontal positioning.
基金supported by the National Natural Science Foundation of China (Grant No.60877017)the Innovation Program of Shanghai Municipal Education Commission (Grant No.08YZ04)the Shanghai Leading Academic Discipline Project (Grant No.S30107)
文摘The valence band offsets of the strained and longitudinally relaxed diamond/cubic boron-nitride （c-BN） （110） superlattice are investigated by the plane wave density functional theory approach and using the on-site core electron as a reference energy level. For the strained diamond/c-BN superlattice, the valence band offset of around 1.50 eV is in good agreement with those using all the electrons methods. As for the longitudinally relaxed superlattice, the valence band offset of around 1.28 eV is smaller than that of the strained superlattice. The reason for this is mainly due to the split of the valence band maximum caused by the anisotropic strain.
基金supported by the National Natural Science Foundation of China under Grant No. 60502010the National Basic Research Program of China under Grant No. A1420080150the Science Foundation of National Defense Key Laboratory under Grant No.9140C0204010703
文摘This study investigates how frequency offsets of multitone jamming affect the fast frequencyhopped binary frequency shift keying （FFH/BFSK） self-normalizing （SNZ） receiver under additive white Gaussian noise （AWGN）. The average bit-error-rate （BER） expressions of the FFH/BFSK SNZ receiver and the average BER expressions of an FFH/BFSK spread-spectrum （SS） communication system with frequency offsets of multitone jamming for the sake of understanding the simulation results better. Simulation results show that BER performance of the FFH/BFSK SNZ receiver with diversity under the worst case multitone jamming （MTJ） and AWGN suffers from multitone jamming＇s frequency offsets when the jamming power is moderate, which is validated by several simulations with different frequency offsets configured in multitone jamming. Therefore, an FFH/BFSK SNZ receiver under multitone jamming can be combated with the help of frequency offsets of multitone jamming.
基金Project supported by the Special Funds of the National Natural Science Foundation of China(Grant Nos.11547226 and 11547180)
文摘Cd1-xZnxS/Cu2ZnSnS4 （CZTS）-based thin film solar cells usually use CdS as a buffer layer, but due to its smaller band gap （2.4 eV）, CdS film has been replaced with higher band gap materials. The cadmium zinc sulfide （CdZnS） ternary compound has a higher band gap than other compounds, which leads to a decrease in window absorption loss. In this paper, the band offsets at Cd1-xZnxS/CuzZnSnS4 （CZTS） heterointerface are calculated by the first-principles, density- functional and pseudopotential method. The band offsets at Cdl xZnxS/CZTS heterointerface are tuned by controlling the composition of Zn in Cd1-xZnxS alloy, the calculated valence band offsets are small, which is consistent with the commonanion rule. The favorable heterointerface of type-I with a moderate barrier height （〈 0.3 eV） can be obtained by controlling the composition of Zn in Cdl-xZnxS alloy between 0.25 and 0.375.
基金the National Natural Science Foundation of China (No. 60272009, No. 60572090, No. 60472045, No. 60496313 and No. 60602009).
文摘The problem of estimating the carrier frequency offsets in Multiple-Input Multiple-Output (MIMO) systems with distributed transmit antennas is addressed. It is supposed that the transmit antennas are distributed while the receive antennas are still centralized, and the general case where both the time delays and the frequency offsets are possibly different for each transmit antenna is considered. The channel is supposed to be frequency flat, and the macroscopic fading is also taken into consideration. A carrier frequency offset estimator based on Maximum Likelihood (ML) is proposed, which can separately estimate the frequency offset for each transmit antenna and exploit the spatial diversity. The Cramer-Rao Bound (CRB) for synchronous MIMO (i.e., the time delays for each transmit antenna are all equal) is also derived. Simulation results are given to illustrate the per- formance of the estimator and compare it with the CRB. It is shown that the estimator can provide satisfactory frequency offset estimates and its performance is close to the CRB for the Signal-to-Noise Ratio (SNR) below 20dB.
基金supported by the National Science and Technology Major Project of China(No.J2019-III-0009-0053).
文摘Serpentine nozzles are widely used in combat aircraft to realize strong stealth characteristics.Based on the layout characteristics within a confined space,a series of double serpentine nozzles with spanwise offsets are established.Using computational fluid dynamics and Taguchi method,the influence mechanisms of the Distribution of Area(DA),Distributions of Centerline for the first and second‘S’sections in the Vertical direction(DCV1 and DCV2),and Distribution of Centerline in the Spanwise direction(DCS)are analyzed.The impact of these factors on the total pressure recovery coefficient can be ranked as DA>DCV2>DCS>DCV1,whereas their impacts on the discharge coefficient and axial thrust coefficient can be ranked as DCV2>DCS>DA>DCV1.Considering the statistical significance of these factors,a nozzle in which DA changes rapidly at the exit and DCV1,DCV2,and DCS change rapidly at the entrance gives the best aerodynamic performance.Compared to the worst configuration,the total pressure recovery coefficient,discharge coefficient,and axial thrust coefficient are improved by 1.6%,3.5%and 3.6%,respectively.DA influences the gas flow acceleration in the entire serpentine channel,resulting in different wall shear stress and friction losses.The various centerline distributions influence the gas flow acceleration effects and form complex wave structures in the constantarea extension section,resulting in different local and friction losses.
基金Research Projects of Nanjing University of Science and Technology
文摘As one of the most important geometric parameters for a PC-type fiber connector end face, apex offset can contribute to high insertion loss and high back-reflection reading. A novel measurement method for the parameter, connector rotating-π method, is proposed. With the method, the apex offset of a common connector end face is measured. The result is compared with that measured by a Norland 3000 fiber connector end face interferometer. It is found that the difference between two results is 1.8μm. Meantime, the influences of relevant error resources on apex offset measurement under rotating-π method and apex-core method are respectively analyzed, and two error equations are derived. The analytical result shows that, compared with apex-core method, if two additional sub-tilts of axis within and in the direction perpendicular to principal plane caused by its rotation are not bigger than the original axis tilt angle, the max. measurement error will then be reduced by at least 22.5% with rotating-π method. The practicability of the method is confirmed by the experiments.
基金This work was supported by the National Key Research and Development Program of China(Grant No.2018YFB2200100)the Key Research Program of the Chinese Academy of Sciences(Grant No.XDPB22)+1 种基金the National Natural Science Foundation of China(Grant No.118764347,11614003,11804333)H.X.D.was also supported by the Youth Innovation Promotion Association of Chinese Academy of Sciences(Grant No.2017154).
文摘Band offset in semiconductors is a fundamental physical quantity that determines the performance of optoelectronic devices.However,the current method of calculating band offset is difficult to apply directly to the large-lattice-mismatched and heterovalent semiconductors because of the existing electric field and large strain at the interfaces.Here,we proposed a modified method to calculate band offsets for such systems,in which the core energy level shifts caused by heterovalent effects and lattice mismatch are estimated by interface reconstruction and the insertion of unidirectional strain structures as transitions,respectively.Taking the Si and III-V systems as examples,the results have the same accuracy as what is a widely used method for small-lattice-mismatched systems,and are much closer to the experimental values for the large-lattice-mismatched and heterovalent systems.Furthermore,by systematically studying the heterojunctions of Si and III-V semiconductors along different directions,it is found that the band offsets of Si/InAs and Si/InSb systems in[100],[110]and[111]directions belong to the type I,and could be beneficial for silicon-based luminescence performance.Our study offers a more reliable and direct method for calculating band offsets of large-lattice-mismatched and heterovalent semiconductors,and could provide theoretical support for the design of the high-performance silicon-based light sources.
基金Projects supported by National Natural Science Foundation of China(10974191)Doctorial Foundation of Zhengzhou University of LightIndustry(2010BSJJ028)
文摘Abstract： Amorphous LazHf2O7 films were grown on Si（100） by pulsed laser deposition method. The valence and conduction band offsets between amorphous La2Hf2O7 film and silicon were determined by using synchrotron radiation photoemission spectroscopy. The energy band gap of amorphous La2Hf2O7 film was measured from the energy-loss spectra of O ls photoelectrons. The band gap of amorphous LazHf2O7 film was determined to be 5.4±0.2 eV. The valence and the conduction-band offsets of amorphous La2Hf2O7 film to Si were obtained to be 2.7±0.2 and 1.6±0.2 eV, respectively. These results indieated that the amorphous La2Hf2O7 film could be one promising candidate for high-k gate dielectrics.
文摘A method, which can predict the valence band offsets at strained layer heterojunctions under different strain situations only by calculating band structures and deformation parameters of the bulk materials, is suggested. The applicability of this method is verified by calculation of the valence band offsets at strained layer heterojuntions ,such as InP/InAs, InP/GaP, GaAs/InAs, GaP/GaAs and AlAs/InAs with various strain conditions.
文摘Design guidelines require that high objects on the inside of horizontal curves be cleared so as to provide sufficient sight distance. An example of the guidelines that require such clearance is the AASHTO’s Green Book. The Green Book has an analytical model for determining minimum clearance for a given design sight distance. The model is well suited for middle sections of long curves. Applying such clearance to sections near beginnings and ends of the curves and to sections where there is reverse of curvature will result in over-clearance. Over-clearance implies extra cost of earthwork where highways pass in cut zones. To avoid such extra costs the guideline suggests using the graphical method to determine exact clearance offsets. The graphical method is accurate but it is also tedious and time consuming. This study developed analytical models for efficiently determining clearance offsets that match the offsets determined with the graphical method. The offsets are ordinates from driver paths to flat roadside spirals that make the boundary of the roadside area to clear. Mathematical equations for the spirals comprise of terms related to highway speed (in the form of design sight distance), curve features, and driver locations. In turn, these terms define magnitudes of the offsets to the spirals. Combination of the terms results in many parameters to the extent of making difficult development of design charts for offsets. However, examining suitability of published offset charts for simple curves as estimates of offsets for sites with reverse curves leads to finding that the charts are suitable as long as the reverse curves have common tangents that are at least as long as 25% of design sight distance. For reverse curves with no common tangents, offset charts have been developed and presented in this paper. Practitioners can use these charts or the derived equations to determine clearance offsets for new sites as well as for existing sites that are deficient in design sight distance.
文摘The magnetic levitation transportation system is one of the potential applications of high-Tc superconducting (HTS) maglev system. The prototype HTS magnetic levitation system is composed of one HTS bulk and a permanent magnet railway (PMR). The maglev transportation system performance is influenced by the maximum levitation force, the maximum guidance force and the maximum of external applied magnetic flux density. The applied magnetic field distribution also needs to be considered carefully. In the paper, the magnetic levitation force of cylindrical HTS bulk over PMR is experimentally studied. During the experiment, symmetrical PMR and Halbach PMR are used separately. The levitation force-gap loops of different lateral offset of the HTS bulk above PMRs are obtained experimentally. The results show that the HTS bulk levitation performance is tightly relative to the external applied magnetic field distribution. The maximum magnetic levitation forces of HTS bulk above symmetrical PMR decrease linearly with the lateral offset increasing. When the lateral offset changes from 0 mm to 25 mm, the maximum magnetic levitation forces of HTS bulk above Halbach PMR increase with the lateral offset increasing. When the lateral offset exceeds the center of the Halbach PMR by 25 mm, the maximum force decreases rapidly with the increase of the lateral offset of the bulk sample.
基金supported by the National Natural Science Foundation of China(62322407,22279034,52261145698,52125205,and W2421103)the National Key Research and Development Program of China(2022YFB3803300)+2 种基金the Shanghai Science and Technology Innovation Action Plan(24110714100 and 22ZR1418900)support from the STINT grant(CH2017-7163)the Swedish Government Strategic Research Area in Materials Science on Functional Materials at Link?ping University(200900971)。
文摘Reducing nonradiative recombination is a main challenge in manufacturing highly efficient optoelectronic devices.Perovskite solar cells(PSCs)typically feature significant nonradiative recombination originating from energetic mismatch at the charge-extracting contact.Here,we widely manipulate the energy offset between the perovskite conduction band minimum(CBM)and the electron transporting state of the fullerene cathode interface layer in p-i-n PSCs by modifying the perovskite surface work function with defect-passivating self-assembled monolayers(SAMs)inducing surface dipoles.It is found that reducing the energy offset for electron extraction at such perovskite/fullerene electron-selective heterointerface from 0.98 to-0.02 eV yields a clear linear improvement in PSC built-in potential,with fill factor,photovoltage and power conversion efficiency all increasing as well.We further demonstrate that the improved photovoltaic performance is attributed to reduced energy offsets between the perovskite CBM and the fullerene electron accepting state,which accelerates electron extraction from perovskite and thus effectively suppresses nonradiative recombination.Moreover,the models of corresponding energy level alignment are proposed to discuss the impacts on PSC performance.Our work highlights the importance of tuning the work function even for defect-passivated perovskite surfaces to achieve barrier-less charge extraction and thus boost PSC performance.
基金Project supported by the National Natural Science Foundation of China.
文摘In the light of our previous result that the average bond energy E_h valuelines up across heterojunction interfaces,in this paper,the valence-band offsets in ten hete-rojunctions have been calculated using the E_h as a reference level with the LMTO-ASAband-structure method.The calculated results are in excellent agreement with those fromthe more elaborate first-principles self-consistent interface calculations.As the presentmethod requires by far the smaller computational effort,it is very convenient for usingon medium-sized computers.
