期刊文献+
共找到268篇文章
< 1 2 14 >
每页显示 20 50 100
一种3D Octagon双环片上网络拓扑结构 被引量:2
1
作者 王辉 王长山 《中国集成电路》 2011年第3期27-30,65,共5页
随着片上网络IP核结点的增加,芯片面积受限的问题日益突出,利用3D拓扑,用体积换取芯片面积是一种可行的方案,这种结构使各个结点的物理距离更近,从而充分地利用了空间资源,可以有效地减少芯片面积。提出一种3D Octagon双环拓扑结构,在... 随着片上网络IP核结点的增加,芯片面积受限的问题日益突出,利用3D拓扑,用体积换取芯片面积是一种可行的方案,这种结构使各个结点的物理距离更近,从而充分地利用了空间资源,可以有效地减少芯片面积。提出一种3D Octagon双环拓扑结构,在均衡负载模式和对称随机负载模式下分析了其网络延迟和吞吐率。结果表明,3D Octagon双环是一种性能良好、可行性高的片上网络拓扑结构。 展开更多
关键词 片上网络 octagon 3D拓扑 路由算法
在线阅读 下载PDF
Numerical simulation of the hydrodynamics within octagonal tanks in recirculating aquaculture systems 被引量:21
2
作者 柳瑶 刘宝良 +2 位作者 雷霁霖 关长涛 黄滨 《Chinese Journal of Oceanology and Limnology》 SCIE CAS CSCD 2017年第4期912-920,共9页
A three-dimensional numerical model was established to simulate the hydrodynamics within an octagonal tank of a recirculating aquaculture system. The realizable k-e turbulence model was applied to describe the flow, t... A three-dimensional numerical model was established to simulate the hydrodynamics within an octagonal tank of a recirculating aquaculture system. The realizable k-e turbulence model was applied to describe the flow, the discrete phase model (DPM) was applied to generate particle trajectories, and the governing equations are solved using the finite volume method. To validate this model, the numerical results were compared with data obtained from a full-scale physical model. The results show that: (1) the realizable k-e model applied for turbulence modeling describes well the flow pattern in octagonal tanks, giving an average relative error of velocities between simulated and measured values of 18% from contour maps of velocity magnitudes; (2) the DPM was applied to obtain particle trajectories and to simulate the rate of particle removal from the tank. The average relative error of the removal rates between simulated and measured values was 11%. The DPM can be used to assess the self-cleaning capability of an octagonal tank; (3) a comprehensive account of the hydrodynamics within an octagonal tank can be assessed from simulations. The velocity distribution was uniform with an average velocity of 15 cm/s; the velocity reached 0.8 m/s near the inlet pipe, which can result in energy losses and cause wall abrasion; the velocity in tank corners was more than 15 cm/s, which suggests good water mixing, and there was no particle sedimentation. The percentage of particle removal for octagonal tanks was 90% with the exception of a little accumulation of 〈5 mm particle in the area between the inlet pipe and the wall. This study demonstrated a consistent numerical model of the hydrodynamics within octagonal tanks that can be further used in their design and optimization as well as promote the wide use of computational fluid dynamics in aquaculture engineering. 展开更多
关键词 recirculating aquaculture systems octagonal tanks hydrodynamic simulation rate of particle removal
原文传递
Effect of interaction and temperature on quantum phase transition in anisotropic square-octagon lattice 被引量:1
3
作者 保安 张雪峰 章晓中 《Chinese Physics B》 SCIE EI CAS CSCD 2015年第5期257-261,共5页
We investigate the effect of interaction, temperature, and anisotropic parameter on the quantum phase transitions in an anisotropic square-octagon lattice with fermions under the framework of the single band Hubbard m... We investigate the effect of interaction, temperature, and anisotropic parameter on the quantum phase transitions in an anisotropic square-octagon lattice with fermions under the framework of the single band Hubbard model through using the combination of cellular dynamical mean field theory and a continuous time Monte Carlo algorithm. The competition between interaction and temperature shows that with the increase of the anisotropic parameter, the critical on-site repulsive interaction for the metal-insulator transition increases for fixed temperature. The interaction-anisotropic parameter phase diagram reveals that with the decrease of temperature, the critical anisotropic parameter for the Mott transition will increase for fixed interaction cases. 展开更多
关键词 anisotropic square-octagon lattice FERMIONS quantum phase transition cellular dynamical mean field theory
原文传递
Mobility Issue on Octagonal Structured ZigBee Network Using Riverbed 被引量:1
4
作者 Nazrul Islam Md. Jaminul Haque Biddut +2 位作者 Md. Faizul Huq Arif Mohammad Motiur Rahman Md. Syfur Rahman 《International Journal of Communications, Network and System Sciences》 2016年第3期55-66,共12页
Wireless Sensor Network (WSN) is a special type of communication medium through distributed sensor nodes. Popular wireless sensor nodes like ZigBee have splendid interoperability after IEEE 802.15.4 standardization in... Wireless Sensor Network (WSN) is a special type of communication medium through distributed sensor nodes. Popular wireless sensor nodes like ZigBee have splendid interoperability after IEEE 802.15.4 standardization in the domain of wireless personal area network (WPAN). ZigBee has another great feature mobility that makes the ZigBee network more versatile. The mobility feature of ZigBee mobile nodes has a greater impact on network performance than fixed nodes. This impact sometimes turns into more severe because of network structure and mobility model. This study mainly focuses on the performance analysis of the ZigBee mobile node under Random and Octagonal mobility management model with the Tree routing method. The Riverbed academic modeler is used to design, implement and simulate the ZigBee network under certain conditions. This study also presents a competitive performance analysis based on ZigBee mobile nodes transmitter and receiver characteristics under the observation of the mobility model. This indicates that Octagonal mobility model exhibits better performance than the Random mobility model. This study will constitute a new way for further designing and planning a reliable and efficient ZigBee network. 展开更多
关键词 WSN ZigBee Network MOBILITY octagonal Structure RIVERBED
在线阅读 下载PDF
Investigation of Heave Response of the Deepwater Octagonal FDPSO Using Various Heave Plate Configurations
5
作者 Chenfang Yu Zhiqiang Hu Shisheng Wang 《Journal of Marine Science and Application》 CSCD 2017年第4期446-457,共12页
Heave plates can be employed to control undesirable heave motion amplitudes of the deepwater octagonal Floating, Drilling, Production, Storage, and Offloading(FDPSO) platform. Numerical simulations and model tests wer... Heave plates can be employed to control undesirable heave motion amplitudes of the deepwater octagonal Floating, Drilling, Production, Storage, and Offloading(FDPSO) platform. Numerical simulations and model tests were applied to analyze and investigate the hydrodynamic response and the feasibility of the heave plate configurations. The diameter and the depth below the free surface of a single-layer heave plate, as well as the spacing of two-layer heave plates, were considered as the primary variables when studying the effect of heave plates on FDPSO hydrodynamics. The analysis results indicate that the heave plate diameter significantly affects the heave hydrodynamics, and heave performance could be improved with an increased diameter. In addition, increasing the depth below the free surface of a single-layer heave plate does not effectively suppress the heave motion within the range of draft depths tested. The target FDPSO obtained better heave characteristics with increased spacing between the two-layer heave plates. Furthermore, the global performances of the octagonal FDPSO with these typical heave plate configurations were comparatively analyzed. The results indicate that from a hydrodynamic point of view, the single-layer heave plate configuration has an advantage over the two-layer heave plate configuration. 展开更多
关键词 octagonal FDPSO HYDRODYNAMICS HEAVE PLATE HEAVE motion numerical analysis model test
在线阅读 下载PDF
A MODE Ⅱ CRACK IN A TWO-DIMENSIONAL OCTAGONAL QUASICRYSTALS
6
作者 尹姝媛 周旺民 范天佑 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 2002年第4期415-420,共6页
The present study develops the fracture theory for a two-dimensional octagonal quasicrystals. The exact analytic solution of a Mode Ⅱ Griffith crack in the material was obtained by using the Fourier transform and dua... The present study develops the fracture theory for a two-dimensional octagonal quasicrystals. The exact analytic solution of a Mode Ⅱ Griffith crack in the material was obtained by using the Fourier transform and dual integral equations theory, then the displacement and stress fields, stress intensity factor and strain energy release rate were determined, the physical sense of the results relative to phason and the difference between mechanical behaviors of the crack problem in crystal and quasicrystal were figured out. These provide important information for studying the deformation and fracture of the new solid phase. 展开更多
关键词 mode crack two-dimensional octagonal quasicrystal stress intensity factor
在线阅读 下载PDF
Self-Similar Transformation and Vertex Configurations of the Octagonal Ammann-Beenker Tiling
7
作者 Hong-Mei Zhang Cheng Cai Xiu-Jun Fu 《Chinese Physics Letters》 SCIE CAS CSCD 2018年第6期41-44,共4页
Based on the matching rules for squares and rhombuses,we study the self-similar transformation and the vertex configurations of the Ammann-Beenker tiling.The structural properties of the configurations and their relat... Based on the matching rules for squares and rhombuses,we study the self-similar transformation and the vertex configurations of the Ammann-Beenker tiling.The structural properties of the configurations and their relations during the self-similar transformation are obtained.Our results reveal the distribution correlations of the configurations,which provide an intuitive understanding of the octagonal quasi-periodic structure and also give implications for growing perfect quasi-periodic tiling according to the local rules. 展开更多
关键词 Self-Similar Transformation and Vertex Configurations of the octagonal Ammann-Beenker Tiling
原文传递
Octagon System高性能CPU卡
8
《电子产品世界》 2004年第06B期21-21,共1页
关键词 octagon System公司 CPU卡 2060 性能
在线阅读 下载PDF
Square-octagon晶格中的量子自旋霍尔效应
9
作者 王国祥 《河南工学院学报》 CAS 2022年第4期36-39,44,共5页
从晶格的紧束缚近似哈密顿量出发,计算square-octagon晶格纳米带的能带结构,分析其边界态特点,并通过Fukui-Hatsugai方法进一步验证系统的拓扑性。计算表明,在合适的参数下,Rahsba自旋轨道耦合作用能产生一对无能隙螺旋边界态,且该边界... 从晶格的紧束缚近似哈密顿量出发,计算square-octagon晶格纳米带的能带结构,分析其边界态特点,并通过Fukui-Hatsugai方法进一步验证系统的拓扑性。计算表明,在合适的参数下,Rahsba自旋轨道耦合作用能产生一对无能隙螺旋边界态,且该边界态受到时间反演对称性保护。同时,在半个布里渊区内的整数场之和为奇数,表明系统处于量子自旋霍尔态。 展开更多
关键词 square-octagon晶格 紧束缚模型 量子自旋霍尔效应
在线阅读 下载PDF
Pathological unit and the octagonal en bloc resection of thoracic ossification ligamentum flavum
10
作者 赵华健 《外科研究与新技术》 2011年第2期100-100,共1页
Objective To describe the pathological unit and octagonal en bloc resection for the treatment of ossification ligamentum flavum(OLF)in thoracic spine with spondylotic myelopathy.Methods Ninety-five patients from Janua... Objective To describe the pathological unit and octagonal en bloc resection for the treatment of ossification ligamentum flavum(OLF)in thoracic spine with spondylotic myelopathy.Methods Ninety-five patients from January 2002 to January 展开更多
关键词 OLF JOA Pathological unit and the octagonal en bloc resection of thoracic ossification ligamentum flavum
暂未订购
超声强化复合溶剂洗涤聚丙烯脱灰分工艺参数优化
11
作者 刘丽艳 李毅洋 +1 位作者 高子珺 吕晓莹 《天津大学学报(自然科学与工程技术版)》 北大核心 2026年第1期17-24,共8页
在电池隔膜材料、电容器膜料等介电材料领域的高端市场中,对灰分含量在50×10^(-6)以下的低灰分聚丙烯的需求强劲.这些高端应用领域对聚丙烯的纯度、电绝缘性能以及化学稳定性提出了极高的要求,而灰分的存在会显著降低材料的介电性... 在电池隔膜材料、电容器膜料等介电材料领域的高端市场中,对灰分含量在50×10^(-6)以下的低灰分聚丙烯的需求强劲.这些高端应用领域对聚丙烯的纯度、电绝缘性能以及化学稳定性提出了极高的要求,而灰分的存在会显著降低材料的介电性能和机械性能,限制其在高端领域的应用.因此,如何高效率脱除聚丙烯颗粒的灰分,拓展其在高要求、高标准的新兴行业中的应用,具有重要的科学意义和工业价值.本文针对已有的“正己烷+异丙醇”复合溶剂脱灰分工艺传质效率低的问题,引入超声强化促进传质,获得优化的工艺参数揭示超声强化机理.采用自主设计的正八棱柱超声反应器,系统研究了超声换能器数量及排布方式、复合溶剂液位高度、复合溶剂组分配比、液固比例及超声处理时间等工艺参数对聚丙烯洗涤脱灰分效果的影响规律.结果表明,在换能器个数为4、复合溶剂液位高度为80 mm、复合溶剂正己烷和异丙醇体积比为21∶4、复合溶剂与聚丙烯颗粒液固比例为10 mL∶1 g以及超声处理时间为30 min的优化工艺参数条件下,聚丙烯颗粒的灰分含量降低至50×10^(-6)以下.通过正交分析,获得了各参数对聚丙烯洗涤脱灰分结果的影响顺序从大到小依次为:超声处理时间,复合溶剂组分配比,复合溶剂液位高度,液固比例.本文通过测量洗涤前后的聚丙烯颗粒粒度分布,揭示了超声强化复合溶剂洗涤聚丙烯脱灰分的作用机理:空化效应产生的微射流使固体颗粒破碎,破坏颗粒表面的致密结构,辅助复合溶剂更好地进入颗粒内部达到洗涤脱灰的效果.相关结果能为超声强化复合溶剂洗涤聚丙烯脱灰分技术及装备开发提供指导. 展开更多
关键词 超声强化 聚丙烯脱灰分 复合溶剂洗涤 正八棱柱超声反应器
在线阅读 下载PDF
面向儿童的博物馆游戏化观览服务系统设计 被引量:1
12
作者 柳奕鸣 高琳 李佳欣 《包装工程》 北大核心 2025年第14期186-198,共13页
目的当前儿童参观博物馆的体验较差,通过游戏化策略介入服务设计来改善博物馆儿童的观览体验,提高儿童主动观览意愿。方法首先,运用服务设计的思维和方法,通过用户访谈、用户旅程图和调查问卷对河南博物院学龄儿童观览现状进行调研,从... 目的当前儿童参观博物馆的体验较差,通过游戏化策略介入服务设计来改善博物馆儿童的观览体验,提高儿童主动观览意愿。方法首先,运用服务设计的思维和方法,通过用户访谈、用户旅程图和调查问卷对河南博物院学龄儿童观览现状进行调研,从情感层和感官层分析儿童观览博物馆时的心理特点和博物馆的展陈特点,总结出服务中的痛点。其次,将提高儿童主动参与作为切入点,定义游戏化设计原则,构建出基于DMC系统的游戏化模型并采用八角行为分析法该模型进行分析和优化。结果设计出适配学龄儿童情感和感官需求的博物馆游戏化观览服务系统,并以“博乐游”APP设计实践为例进行了具体阐述,得到了被测者的认可。结论在服务中介入游戏化,在提升用户参与、兴趣维持和体验质量等方面是一种行之有效的方法,可以有效改善博物馆儿童的观览体验,增强儿童对文化知识的吸收效率,提高其主动观览意愿。 展开更多
关键词 游戏化 服务设计 学龄儿童 博物馆体验 DMC 八角行为分析法
在线阅读 下载PDF
垂荡板对FDPSO船体及系泊系统的动力性能影响研究
13
作者 谢文会 李辉 +1 位作者 邓小康 刘利琴 《舰船科学技术》 北大核心 2025年第12期59-65,共7页
本文研究新型FDPSO在南海海况中的动力性能,重点分析垂荡板设置对浮体水动力的影响。以深水八角形FDPSO为对象,采用SESAM软件通过数值分析计算不同垂荡板布置下的浮体运动响应,验证频域内水动力性能的准确性,并通过时域耦合分析评估其... 本文研究新型FDPSO在南海海况中的动力性能,重点分析垂荡板设置对浮体水动力的影响。以深水八角形FDPSO为对象,采用SESAM软件通过数值分析计算不同垂荡板布置下的浮体运动响应,验证频域内水动力性能的准确性,并通过时域耦合分析评估其在一年一遇和百年一遇海况下的表现。研究结果表明,单层垂荡板在抑制垂荡和减摇方面表现更优;对于双层垂荡板,综合考虑垂荡板增阻效应和恶劣海况下的出水问题,最终选择5 m间距,兼顾性能与安全性。 展开更多
关键词 八角形FDPSO 垂荡板布置 数值分析 水动力性能
在线阅读 下载PDF
基于流量均匀分配的八角形布水器蓄热性能及优化研究
14
作者 贾春强 范文斌 +2 位作者 孙斌 李乃昶 刘鑫洋 《机床与液压》 北大核心 2025年第7期118-128,共11页
布水器作为斜温层蓄热水罐中的重要部件,其参数对蓄热罐的蓄热性能——斜温层厚度及其形成时间,具有重要影响。以某八角形布水器为研究对象,针对流量分配不均匀问题提出一种基于AMESim的解决方案。在实现布水器流量均匀分配的基础上,采... 布水器作为斜温层蓄热水罐中的重要部件,其参数对蓄热罐的蓄热性能——斜温层厚度及其形成时间,具有重要影响。以某八角形布水器为研究对象,针对流量分配不均匀问题提出一种基于AMESim的解决方案。在实现布水器流量均匀分配的基础上,采用CFD数值模拟方法研究布水器半径、支管管径、分配管管径以及入口流速等参数对蓄热性能的影响,并通过二阶响应面模型结合多目标遗传算法对各参数进行优化。结果表明:适当减小布水器半径,增大支管管径、分配管管径和入口流速,有助于减小斜温层厚度和缩短形成时间;优化后的布水器使斜温层厚度及其形成时间分别较初始值减小了3.49 m(77.2%)和488.2 s(75.4%),有效地提升了蓄热罐的蓄热性能。 展开更多
关键词 八角形布水器 蓄热性能 流量均匀分配 响应面法 参数优化
在线阅读 下载PDF
新型角度测量与分度推算方法在刻面型宝石加工中的应用研究
15
作者 尚中谊 林国华 周青超 《中国宝玉石》 2025年第1期9-15,24,共8页
在宝石琢型工艺中,工具八角手因其多样的切削面、灵活性和高效率等特性被广泛应用于刻面型宝石的加工。然而,目前八角手操作中用于确定宝石加工角度的方法存在误差较大和分度推算繁琐的问题,不便于加工中分度的快速和精确调整,限制了八... 在宝石琢型工艺中,工具八角手因其多样的切削面、灵活性和高效率等特性被广泛应用于刻面型宝石的加工。然而,目前八角手操作中用于确定宝石加工角度的方法存在误差较大和分度推算繁琐的问题,不便于加工中分度的快速和精确调整,限制了八角手在实际应用中的推广。本文在宝石研磨机与八角手配合的加工场景中,通过开发新型角度确定装置、改变加工角度的量取位置、制作八角手分度推算示意图等手段,解决了上述问题,为八角手在刻面型宝石加工中的推广应用提供了高质量的技术方案,本文设计的新型角度测量与分度推算方法同样适用于五角手和六角手,有助于推动宝石加工行业内的工艺改进和技术创新。 展开更多
关键词 八角手 刻面型宝石 角度测量 分度推算
在线阅读 下载PDF
满汉文化交融下的俚俗音乐形态研究——以清代八角鼓为例
16
作者 蒋方舟 张依宁 《民族艺林》 2025年第6期56-62,共7页
清代八角鼓作为满汉文化交融的典型音乐载体,其形制、表演形式与音乐语汇生动体现了文化互动下的俚俗音乐形态演化。八角鼓形制融合满族萨满鼓与汉族三弦特征,其曲式结构呈现满汉曲牌体、板腔体混合运用,唱词语言保留满语音韵遗存而依... 清代八角鼓作为满汉文化交融的典型音乐载体,其形制、表演形式与音乐语汇生动体现了文化互动下的俚俗音乐形态演化。八角鼓形制融合满族萨满鼓与汉族三弦特征,其曲式结构呈现满汉曲牌体、板腔体混合运用,唱词语言保留满语音韵遗存而依托汉地叙事主题。旗人身份认同与市民娱乐需求共同驱动了该乐种的世俗化转型,其音乐形态的“双重性”既是文化调适的产物,亦成为维系文化记忆的符号。文章通过历史文献考据与音乐本体分析,为跨文化音乐交融机制提供微观实证,期望对当代非物质文化遗产活态传承中文化共生策略有启示意义。 展开更多
关键词 俚俗音乐 清代 八角鼓
在线阅读 下载PDF
智能一体化水面垃圾清理装置的设计应用与研究
17
作者 杜琪 熊其平 +2 位作者 程和民 曹炳鑫 占红星 《模具制造》 2025年第10期31-33,共3页
基于海洋垃圾难于清理等问题,提出了采用涡旋向心吸力实现了对垃圾的收集,解决了漂浮固体、漂浮油污一体化收集难题,提高了设备的利用率;采用设计矢量喷口装置,既实现了对水泵排水推力的回收,又能通过矢量喷口控制清理器航行;其次采用... 基于海洋垃圾难于清理等问题,提出了采用涡旋向心吸力实现了对垃圾的收集,解决了漂浮固体、漂浮油污一体化收集难题,提高了设备的利用率;采用设计矢量喷口装置,既实现了对水泵排水推力的回收,又能通过矢量喷口控制清理器航行;其次采用双船体支撑设计,同时控制其浮心高于重心,使清理器整体具有强稳定性,无惧风浪;最后采用八字挡板开槽进水口设计,有效提升50%收集效率,减少了大量无用吸力,有效节约能源,达到降碳减排的目的从而促进我国生态保护、污染治理、绿色低碳发展。 展开更多
关键词 涡旋向心吸力 矢量喷口 八字挡板
在线阅读 下载PDF
原起寺青龙宝塔的设计特征探析
18
作者 张力中 王润宁 《山西建筑》 2025年第12期16-20,共5页
原起寺青龙宝塔平面八边形,高七层,是山西南部地区保存最为完整的一座宋代原构砖塔,是研究这一时期砖塔建筑的绝佳案例,在对其进行勘察测绘后,对相关测绘数据的整理与分析中发现了青龙宝塔在平面中存在方圆构图关系,以及其在立面高度上... 原起寺青龙宝塔平面八边形,高七层,是山西南部地区保存最为完整的一座宋代原构砖塔,是研究这一时期砖塔建筑的绝佳案例,在对其进行勘察测绘后,对相关测绘数据的整理与分析中发现了青龙宝塔在平面中存在方圆构图关系,以及其在立面高度上通过整数尺或半尺及砖皮数来控制标高尺寸的特征,论证了原起寺青龙宝塔在平面及立面中存在的设计逻辑。 展开更多
关键词 宋塔 方圆构图 八边形 整数尺
在线阅读 下载PDF
现代化粮食工厂大型麦麸仓的设计、安装及应用
19
作者 刘建华 车冰涛 +2 位作者 赵峰 赵飞龙 刘少广 《粮食与食品工业》 2025年第2期11-14,共4页
通过分析研究大型麦麸仓,主要是为了解决仓盖和筒节结构变形问题,避免建造过程中吊装支架的不稳定性,以及生产过程中的结拱难题等。本文重点阐述了新型麦麸仓的仓顶盖、直筒节设计结构要点、建造吊装方式以及生产应用中的注意事项,为大... 通过分析研究大型麦麸仓,主要是为了解决仓盖和筒节结构变形问题,避免建造过程中吊装支架的不稳定性,以及生产过程中的结拱难题等。本文重点阐述了新型麦麸仓的仓顶盖、直筒节设计结构要点、建造吊装方式以及生产应用中的注意事项,为大型麦麸仓安全建造和推广应用提供参考和借鉴。 展开更多
关键词 麦麸仓顶盖 直筒节 八角形门架 结拱
在线阅读 下载PDF
上一页 1 2 14 下一页 到第
使用帮助 返回顶部