The method and basic structure of object─oriented knowledge representation are presented in detail and the hierarchical structurc of object description is explained Based on object─oriented technology.the gear box c...The method and basic structure of object─oriented knowledge representation are presented in detail and the hierarchical structurc of object description is explained Based on object─oriented technology.the gear box concept design expert cistem of NC miller (GBCDLS) has been developed and applied to practical use.Moreover. the design principlc and techniques of GBCDES are discussed and analyzed. and the main functions of GBCDES are described. From the results of applications.it can be seen that GBCDES is effective and successful.展开更多
The ubiquity of mobile devices has driven advancements in mobile object detection.However,challenges in multi-scale object detection in open,complex environments persist due to limited computational resources.Traditio...The ubiquity of mobile devices has driven advancements in mobile object detection.However,challenges in multi-scale object detection in open,complex environments persist due to limited computational resources.Traditional approaches like network compression,quantization,and lightweight design often sacrifice accuracy or feature representation robustness.This article introduces the Fast Multi-scale Channel Shuffling Network(FMCSNet),a novel lightweight detection model optimized for mobile devices.FMCSNet integrates a fully convolutional Multilayer Perceptron(MLP)module,offering global perception without significantly increasing parameters,effectively bridging the gap between CNNs and Vision Transformers.FMCSNet achieves a delicate balance between computation and accuracy mainly by two key modules:the ShiftMLP module,including a shift operation and an MLP module,and a Partial group Convolutional(PGConv)module,reducing computation while enhancing information exchange between channels.With a computational complexity of 1.4G FLOPs and 1.3M parameters,FMCSNet outperforms CNN-based and DWConv-based ShuffleNetv2 by 1%and 4.5%mAP on the Pascal VOC 2007 dataset,respectively.Additionally,FMCSNet achieves a mAP of 30.0(0.5:0.95 IoU threshold)with only 2.5G FLOPs and 2.0M parameters.It achieves 32 FPS on low-performance i5-series CPUs,meeting real-time detection requirements.The versatility of the PGConv module’s adaptability across scenarios further highlights FMCSNet as a promising solution for real-time mobile object detection.展开更多
In the context of the global energy low-carbon transition,phase change energy storage technology becomes a key technology to solve the problem of intermittent renewable energy.Oriented phase change composites(OCPCMs)r...In the context of the global energy low-carbon transition,phase change energy storage technology becomes a key technology to solve the problem of intermittent renewable energy.Oriented phase change composites(OCPCMs)receive widespread attention in practical energy storage applications due to their unique oriented thermally conductive structure,which achieves significant thermal conductivity enhancement in specific directions while retaining the high energy storage capacity of the phase change components.This review systematically summarizes the overall analysis of OCPCMs from synthesis and preparation to application scenarios in recent years.Herein,we introduce the analysis of the heat transfer mechanism of the materials and explore the advantages of the oriented structure in OCPCMs in the heat transfer behavior from a bionic perspective.We then focus on summarizing and generalizing the methods for preparing OCPCMs,giving suggestions for suitable methods according to different scenarios.Besides,we discuss the application of finite element simulation methods to the monitoring of the thermal management behavior of OCPCMs,and look into the potential future application areas of such materials.Finally,it is hoped that this review will provide guidance for the academic community in developing high-performance OCPCMs.展开更多
Detecting oriented targets in remote sensing images amidst complex and heterogeneous backgrounds remains a formidable challenge in the field of object detection.Current frameworks for oriented detection modules are co...Detecting oriented targets in remote sensing images amidst complex and heterogeneous backgrounds remains a formidable challenge in the field of object detection.Current frameworks for oriented detection modules are constrained by intrinsic limitations,including excessive computational and memory overheads,discrepancies between predefined anchors and ground truth bounding boxes,intricate training processes,and feature alignment inconsistencies.To overcome these challenges,we present ASL-OOD(Angle-based SIOU Loss for Oriented Object Detection),a novel,efficient,and robust one-stage framework tailored for oriented object detection.The ASL-OOD framework comprises three core components:the Transformer-based Backbone(TB),the Transformer-based Neck(TN),and the Angle-SIOU(Scylla Intersection over Union)based Decoupled Head(ASDH).By leveraging the Swin Transformer,the TB and TN modules offer several key advantages,such as the capacity to model long-range dependencies,preserve high-resolution feature representations,seamlessly integrate multi-scale features,and enhance parameter efficiency.These improvements empower the model to accurately detect objects across varying scales.The ASDH module further enhances detection performance by incorporating angle-aware optimization based on SIOU,ensuring precise angular consistency and bounding box coherence.This approach effectively harmonizes shape loss and distance loss during the optimization process,thereby significantly boosting detection accuracy.Comprehensive evaluations and ablation studies on standard benchmark datasets such as DOTA with an mAP(mean Average Precision)of 80.16 percent,HRSC2016 with an mAP of 91.07 percent,MAR20 with an mAP of 85.45 percent,and UAVDT with an mAP of 39.7 percent demonstrate the clear superiority of ASL-OOD over state-of-the-art oriented object detection models.These findings underscore the model’s efficacy as an advanced solution for challenging remote sensing object detection tasks.展开更多
Systematically analyzing the impact mechanisms of policy on Land Use Conflict(LUC)is crucial for constructing effective conflict mitigation strategies.However,previous research on how policy influences LUC remains rel...Systematically analyzing the impact mechanisms of policy on Land Use Conflict(LUC)is crucial for constructing effective conflict mitigation strategies.However,previous research on how policy influences LUC remains relatively limited.Focusing on the indirect driving role of policy on LUC,this study proposed County Development Level(CDL)under Major Function Oriented Zone Planning(MFOZP)guidance as an intermediary variable,bridging the implicit influence of MFOZP and the explicit changes in LUC.Using the Beijing-Tianjin-Hebei(BTH)region in China as a case study,we analyzed the spatio-temporal evolution characteristics of LUC and CDL for the periods 2000-2010 and 2010-2020,before and after MFOZP implementation.Panel models and Geographically Weighted Regression(GWR)were employed to explore the mechanism by which CDL influences LUC under MFOZP guidance.The results show that:1)MFOZP implementation effectively alleviates land use pressure from regional development,with LUC continuously declining at a rate of 2.41%,while CDL exhibits slight growth(3.84%),during 2010-2020.2)Under MFOZP guidance,CDL reduces pressure on Land Use Structure Conflict(LUSC)and Land Use Process Conflict(LUPC),enhances its inhibitory effect on Land Use Function Conflict(LUFC),and significantly contributes to LUC coordination,with notable spatial heterogeneity.3)The coupling relationship between CDL and LUC has improved post-implementation.Based on this,tailored LUC coordination strategies are proposed for different functional zones.This study confirms the effectiveness of MFOZP in coordinating LUC and provides a scientific reference for LUC research under policy frameworks and the governance of LUC in the BTH region.展开更多
In order to solve existing problems about the method of establishing traditional system structure of decision support system(DSS), O S chart is applied to describe object oriented system structure of general DSS, an...In order to solve existing problems about the method of establishing traditional system structure of decision support system(DSS), O S chart is applied to describe object oriented system structure of general DSS, and a new method of eight specific steps is proposed to establish object oriented system structure of DSS by using the method of O S chart, which is applied successfully to the development of the DSS for the energy system ecology engineering research of the Wangheqiu country. Supplying many scientific effective computing models, decision support ways and a lot of accurate reliable decision data, the DSS plays a critical part in helping engineering researchers to make correct decisions. Because the period for developing the DSS is relatively shorter, the new way improves the efficiency of establishing DSS greatly. It also makes the DSS of system structure more flexible and easy to expand.展开更多
The concept of intelligent integrated network management (IINM) is briefly introduced. In order to analyze, design and implement IINM successfully, object oriented approach is testified to be an effective and efficien...The concept of intelligent integrated network management (IINM) is briefly introduced. In order to analyze, design and implement IINM successfully, object oriented approach is testified to be an effective and efficient way. In this paper, object oriented technique is applied to the structural model of IINM system, The Domain object class and the MU object class are used to represent the manager and the managed resources. Especially, NM IA is introduced which is a special object class with intelligent behaviors to manage the resources efficiently.展开更多
An object oriented data modelling in computer aided design (CAD) databases is focused. Starting with the discussion of data modelling requirements for CAD applications, appropriate data modelling features are introdu...An object oriented data modelling in computer aided design (CAD) databases is focused. Starting with the discussion of data modelling requirements for CAD applications, appropriate data modelling features are introduced herewith. A feasible approach to select the “best” data model for an application is to analyze the data which has to be stored in the database. A data model is appropriate for modelling a given task if the information of the application environment can be easily mapped to the data model. Thus, the involved data are analyzed and then object oriented data model appropriate for CAD applications are derived. Based on the reviewed object oriented techniques applied in CAD, object oriented data modelling in CAD is addressed in details. At last 3D geometrical data models and implementation of their data model using the object oriented method are presented.展开更多
This paper discusses the design concept and method about window based and object oriented Graphic User Interface(GUI),and describes the definition of each class in detail. It is developed with Watcom C ++ in...This paper discusses the design concept and method about window based and object oriented Graphic User Interface(GUI),and describes the definition of each class in detail. It is developed with Watcom C ++ in DOS environment.The GUI can be redeveloped conveniently and effectively by users.It consists of window,popup menu,icon,button and other components.展开更多
An object oriented coal mining land cover classification method based on semantically meaningful image segmentation and image combination of GeoEye imagery and airborne laser scanning(ALS)data was presented.First,DEM,...An object oriented coal mining land cover classification method based on semantically meaningful image segmentation and image combination of GeoEye imagery and airborne laser scanning(ALS)data was presented.First,DEM,DSM and nDSM(normalized Digital Surface Model,nDSM)were extracted from ALS data.The GeoEye imagery and DSM data were combined to create segmented objects based on neighbor regions merge method.Then 10 kinds of objects were extracted.Different kinds of vegetation objects,including crop,grass,shrub and tree,can be extracted by using NDVI and height value of nDSM.Water and coal pile field was extracted by using NDWI and the standard deviation of DSM method.Height differences also can be used to distinguish buildings from road and vacant land,and accurate building contour information can be extracted by using relationship of neighbor objects and morphological method.The test result shows that the total classification accuracy of the presented method is 90.78%and the kappa coefficient is 0.8914.展开更多
The modern war features a highly distributed coordination. In the face of great time constrains, it is important to change command organizations to adapt to the real environment. Therefore it's a key step to set u...The modern war features a highly distributed coordination. In the face of great time constrains, it is important to change command organizations to adapt to the real environment. Therefore it's a key step to set up adaptive C2 teams. In this paper, the relational problems about distributed C2 organizational structure adaptation are discussed, and the methodology for team decision making design based on the object oriented technique is studied.展开更多
Image classification is one of the most basic operations of digital image processing. The present review focuses on the strengths and weaknesses of traditional pixel-based classification (PBC) and the advances of obje...Image classification is one of the most basic operations of digital image processing. The present review focuses on the strengths and weaknesses of traditional pixel-based classification (PBC) and the advances of object-oriented classification (OOC) algorithms employed for the extraction of information from remotely sensed satellite imageries. The state-of-the-art classifiers are reviewed for their potential usage in urban remote sensing (RS), with a special focus on cryospheric applications. Generally, classifiers for information extraction can be divided into three catalogues: 1) based on the type of learning (supervised and unsupervised), 2) based on assumptions on data distribution (parametric and non-parametric) and, 3) based on the number of outputs for each spatial unit (hard and soft). The classification methods are broadly based on the PBC or the OOC approaches. Both methods have their own advantages and disadvantages depending upon their area of application and most importantly the RS datasets that are used for information extraction. Classification algorithms are variedly explored in the cryosphere for extracting geospatial information for various logistic and scientific applications, such as to understand temporal changes in geographical phenomena. Information extraction in cryospheric regions is challenging, accounting to the very similar and conflicting spectral responses of the features present in the region. The spectral responses of snow and ice, water, and blue ice, rock and shadow are a big challenge for the pixel-based classifiers. Thus, in such cases, OOC approach is superior for extracting information from the cryospheric regions. Also, ensemble classifiers and customized spectral index ratios (CSIR) proved extremely good approaches for information extraction from cryospheric regions. The present review would be beneficial for developing new classifiers in the cryospheric environment for better understanding of spatial-temporal changes over long time scales.展开更多
To improve the reusable and configurable ability of computer numerical control ( CNC ) software, a new method to construct reusable model of CNC software with object-oriented (OO) technology is proposed. Based on anal...To improve the reusable and configurable ability of computer numerical control ( CNC ) software, a new method to construct reusable model of CNC software with object-oriented (OO) technology is proposed. Based on analyzing function of CNC software, the article presents how to construct a general class library of CNC software with OO technology. Most function modules of CNC software can he reused because of inheritable capability of classes. Besides, the article analyzes the object relational model in request/report mode, and multitask concurrent management model, which can he applied on double-CPU hardware platform and Windows 95/NT environment. Finally, the method has been successfully applied on a turning CNC system and a milling CNC system, and some function modules have been reused.展开更多
A SOTER management system was developed by analyzing, designing, programming, testing, repeated proceeding and progressing based on the object-oriented method. The function of the attribute database management is inhe...A SOTER management system was developed by analyzing, designing, programming, testing, repeated proceeding and progressing based on the object-oriented method. The function of the attribute database management is inherited and expanded in the new system. The integrity and security of the SOTER database are enhanced. The attribute database management, the spatial database management and the model base are integrated into SOTER based on the component object model (COM), and the graphical user interface (GUI) for Windows is used to interact with clients, thus being easy to create and maintain the SOTER, and convenient to promote the quantification and automation of soil information application.展开更多
The constraints and the operations play an important role in database generalization.They guide and govern database generalization.The constraints are translation of the required conditions that should take into accou...The constraints and the operations play an important role in database generalization.They guide and govern database generalization.The constraints are translation of the required conditions that should take into account not only the objects and relationships among objects but also spatial data schema (classification and aggregation hierarchy) associated with the final existing database.The operations perform the actions of generalization in support of data reduction in the database.The constraints in database generalization are still lack of research.There is still the lack of frameworks to express the constraints and the operations on the basis of object_oriented data structure in database generalization.This paper focuses on the frameworks for generalization operations and constraints on the basis of object_oriented data structure in database generalization.The constraints as the attributes of the object and the operations as the methods of the object can be encapsulated in classes.They have the inheritance and polymorphism property.So the framework of the constraints and the operations which are based on object_oriented data structure can be easily understood and implemented.The constraint and the operations based on object_oriented database are proposed based on object_oriented database.The frameworks for generalization operations,constraints and relations among objects based on object_oriented data structure in database generalization are designed.The categorical database generalization is concentrated on in this paper.展开更多
The paper presents a universal fault diagnostic expert system frame work. The frame work is characterized by two basic features. The first includes a fault diagnostic strategy which utilizes the fault classification a...The paper presents a universal fault diagnostic expert system frame work. The frame work is characterized by two basic features. The first includes a fault diagnostic strategy which utilizes the fault classification and checks knowledge about unit under test. The degree of accuracy to which faults are located is improved by using fault classification knowledge. The second characteristic is object oriented inference mechanism using message passing. Object orientation in inference mechanism improved inference efficiency. The developed framework demonstrates its effectiveness and superiority compared to earlier approaches using case studies.展开更多
Various code development platforms, such as the ATHENA Framework [1] of the ATLAS [2] experiment encounter lengthy compilation/linking times. To augment this situation, the IRIS Development Platform was built as a sof...Various code development platforms, such as the ATHENA Framework [1] of the ATLAS [2] experiment encounter lengthy compilation/linking times. To augment this situation, the IRIS Development Platform was built as a software development framework acting as compiler, cross-project linker and data fetcher, which allow hot-swaps in order to compare various versions of software under test. The flexibility fostered by IRIS allowed modular exchange of software libraries among developers, making it a powerful development tool. The IRIS platform used input data ROOT-ntuples [3];however a new data model is sought, in line with the facilities offered by IRIS. The schematic of a possible new data structuring—as a user implemented object oriented data base, is presented.展开更多
In the study of oriented bounding boxes(OBB)object detection in high-resolution remote sensing images,the problem of missed and wrong detection of small targets occurs because the targets are too small and have differ...In the study of oriented bounding boxes(OBB)object detection in high-resolution remote sensing images,the problem of missed and wrong detection of small targets occurs because the targets are too small and have different orientations.Existing OBB object detection for remote sensing images,although making good progress,mainly focuses on directional modeling,while less consideration is given to the size of the object as well as the problem of missed detection.In this study,a method based on improved YOLOv8 was proposed for detecting oriented objects in remote sensing images,which can improve the detection precision of oriented objects in remote sensing images.Firstly,the ResCBAMG module was innovatively designed,which could better extract channel and spatial correlation information.Secondly,the innovative top-down feature fusion layer network structure was proposed in conjunction with the Efficient Channel Attention(ECA)attention module,which helped to capture inter-local cross-channel interaction information appropriately.Finally,we introduced an innovative ResCBAMG module between the different C2f modules and detection heads of the bottom-up feature fusion layer.This innovative structure helped the model to better focus on the target area.The precision and robustness of oriented target detection were also improved.Experimental results on the DOTA-v1.5 dataset showed that the detection Precision,mAP@0.5,and mAP@0.5:0.95 metrics of the improved model are better compared to the original model.This improvement is effective in detecting small targets and complex scenes.展开更多
Quickly extraction of building information technology is an important application in urban development planning, electronic information, national defense and others. This paper takes Landsat-8 multispectral and panchr...Quickly extraction of building information technology is an important application in urban development planning, electronic information, national defense and others. This paper takes Landsat-8 multispectral and panchromatic data as data source, using the local variance method to select the optimal segmentation scale, normalized difference vegetation index (NDVI) and the normalized building index (NDBI) and panchromatic brightness value of an object oriented classification rule extraction. The high vegetation coverage area of buildings, and through the spatial relationships and distinguishing feature of collections of buildings independent buildings and villages. The results showed that Google earth high resolution image analysis and accuracy evaluation. the results of the extraction based on the overall accuracy of village extraction was 83%, the accuracy of extraction of independent buildings was 70%, according to the L8 remote sensing data, object oriented classification method can quickly and accurately extract the high vegetation coverage area of the building.展开更多
Grain-oriented silicon steels were prepared at different heating rates during high temperature annealing,in which the evolution of magnetic properties,grain orientations and precipitates were studied.To illustrate the...Grain-oriented silicon steels were prepared at different heating rates during high temperature annealing,in which the evolution of magnetic properties,grain orientations and precipitates were studied.To illustrate the Zener factor,the diameter and number density of precipitates of interrupted testing samples were statistically calculated.The effect of precipitate ripening on the Goss texture and magnetic property was investigated.Data indicated that the trend of Zener factor was similar under different heating rates,first increasing and then decreasing,and that the precipitate maturing was greatly inhibited as the heating rate increased.Secondary recrystallization was developed at the temperature of 1010℃when a heating rate of 5℃/h was used,resulting in Goss,Brass and{110}<227>oriented grains growing abnormally and a magnetic induction intensity of 1.90T.Furthermore,increasing the heating rate to 20℃/h would inhibit the development of undesirable oriented grains and obtain a sharp Goss texture.However,when the heating rate was extremely fast,such as 40℃/h,poor secondary recrystallization was developed with many island grains,corresponding to a decrease in magnetic induction intensity to 1.87 T.At a suitable heating rate of 20℃/h,the sharpest Goss texture and the highest magnetic induction of 1.94 T with an onset secondary recrystallization temperature of 1020℃were found among the experimental variables in this study.The heating rate affected the initial temperature of secondary recrystallization by controlling the maturation of precipitates,leading to the deviation and dispersion of Goss texture,thereby reducing the magnetic properties.展开更多
文摘The method and basic structure of object─oriented knowledge representation are presented in detail and the hierarchical structurc of object description is explained Based on object─oriented technology.the gear box concept design expert cistem of NC miller (GBCDLS) has been developed and applied to practical use.Moreover. the design principlc and techniques of GBCDES are discussed and analyzed. and the main functions of GBCDES are described. From the results of applications.it can be seen that GBCDES is effective and successful.
基金funded by the National Natural Science Foundation of China under Grant No.62371187the Open Program of Hunan Intelligent Rehabilitation Robot and Auxiliary Equipment Engineering Technology Research Center under Grant No.2024JS101.
文摘The ubiquity of mobile devices has driven advancements in mobile object detection.However,challenges in multi-scale object detection in open,complex environments persist due to limited computational resources.Traditional approaches like network compression,quantization,and lightweight design often sacrifice accuracy or feature representation robustness.This article introduces the Fast Multi-scale Channel Shuffling Network(FMCSNet),a novel lightweight detection model optimized for mobile devices.FMCSNet integrates a fully convolutional Multilayer Perceptron(MLP)module,offering global perception without significantly increasing parameters,effectively bridging the gap between CNNs and Vision Transformers.FMCSNet achieves a delicate balance between computation and accuracy mainly by two key modules:the ShiftMLP module,including a shift operation and an MLP module,and a Partial group Convolutional(PGConv)module,reducing computation while enhancing information exchange between channels.With a computational complexity of 1.4G FLOPs and 1.3M parameters,FMCSNet outperforms CNN-based and DWConv-based ShuffleNetv2 by 1%and 4.5%mAP on the Pascal VOC 2007 dataset,respectively.Additionally,FMCSNet achieves a mAP of 30.0(0.5:0.95 IoU threshold)with only 2.5G FLOPs and 2.0M parameters.It achieves 32 FPS on low-performance i5-series CPUs,meeting real-time detection requirements.The versatility of the PGConv module’s adaptability across scenarios further highlights FMCSNet as a promising solution for real-time mobile object detection.
基金financially supported by the Fundamental Research Funds for the Central Universities(No.FRF-KST-25-001)the Beijing Natural Science Foundation(No.L253029)。
文摘In the context of the global energy low-carbon transition,phase change energy storage technology becomes a key technology to solve the problem of intermittent renewable energy.Oriented phase change composites(OCPCMs)receive widespread attention in practical energy storage applications due to their unique oriented thermally conductive structure,which achieves significant thermal conductivity enhancement in specific directions while retaining the high energy storage capacity of the phase change components.This review systematically summarizes the overall analysis of OCPCMs from synthesis and preparation to application scenarios in recent years.Herein,we introduce the analysis of the heat transfer mechanism of the materials and explore the advantages of the oriented structure in OCPCMs in the heat transfer behavior from a bionic perspective.We then focus on summarizing and generalizing the methods for preparing OCPCMs,giving suggestions for suitable methods according to different scenarios.Besides,we discuss the application of finite element simulation methods to the monitoring of the thermal management behavior of OCPCMs,and look into the potential future application areas of such materials.Finally,it is hoped that this review will provide guidance for the academic community in developing high-performance OCPCMs.
基金supported by the Key Research and Development Program of Shaanxi Province(2024GX-YBXM-010).
文摘Detecting oriented targets in remote sensing images amidst complex and heterogeneous backgrounds remains a formidable challenge in the field of object detection.Current frameworks for oriented detection modules are constrained by intrinsic limitations,including excessive computational and memory overheads,discrepancies between predefined anchors and ground truth bounding boxes,intricate training processes,and feature alignment inconsistencies.To overcome these challenges,we present ASL-OOD(Angle-based SIOU Loss for Oriented Object Detection),a novel,efficient,and robust one-stage framework tailored for oriented object detection.The ASL-OOD framework comprises three core components:the Transformer-based Backbone(TB),the Transformer-based Neck(TN),and the Angle-SIOU(Scylla Intersection over Union)based Decoupled Head(ASDH).By leveraging the Swin Transformer,the TB and TN modules offer several key advantages,such as the capacity to model long-range dependencies,preserve high-resolution feature representations,seamlessly integrate multi-scale features,and enhance parameter efficiency.These improvements empower the model to accurately detect objects across varying scales.The ASDH module further enhances detection performance by incorporating angle-aware optimization based on SIOU,ensuring precise angular consistency and bounding box coherence.This approach effectively harmonizes shape loss and distance loss during the optimization process,thereby significantly boosting detection accuracy.Comprehensive evaluations and ablation studies on standard benchmark datasets such as DOTA with an mAP(mean Average Precision)of 80.16 percent,HRSC2016 with an mAP of 91.07 percent,MAR20 with an mAP of 85.45 percent,and UAVDT with an mAP of 39.7 percent demonstrate the clear superiority of ASL-OOD over state-of-the-art oriented object detection models.These findings underscore the model’s efficacy as an advanced solution for challenging remote sensing object detection tasks.
基金Under the auspices of the National Key Research and Development Program of China(No.2018YFD1100803)the Fundamental Research Fund for the Central Universities(Ph.D.Top Innovative Talents Fund of CUMTB)(No.BBJ2024029)。
文摘Systematically analyzing the impact mechanisms of policy on Land Use Conflict(LUC)is crucial for constructing effective conflict mitigation strategies.However,previous research on how policy influences LUC remains relatively limited.Focusing on the indirect driving role of policy on LUC,this study proposed County Development Level(CDL)under Major Function Oriented Zone Planning(MFOZP)guidance as an intermediary variable,bridging the implicit influence of MFOZP and the explicit changes in LUC.Using the Beijing-Tianjin-Hebei(BTH)region in China as a case study,we analyzed the spatio-temporal evolution characteristics of LUC and CDL for the periods 2000-2010 and 2010-2020,before and after MFOZP implementation.Panel models and Geographically Weighted Regression(GWR)were employed to explore the mechanism by which CDL influences LUC under MFOZP guidance.The results show that:1)MFOZP implementation effectively alleviates land use pressure from regional development,with LUC continuously declining at a rate of 2.41%,while CDL exhibits slight growth(3.84%),during 2010-2020.2)Under MFOZP guidance,CDL reduces pressure on Land Use Structure Conflict(LUSC)and Land Use Process Conflict(LUPC),enhances its inhibitory effect on Land Use Function Conflict(LUFC),and significantly contributes to LUC coordination,with notable spatial heterogeneity.3)The coupling relationship between CDL and LUC has improved post-implementation.Based on this,tailored LUC coordination strategies are proposed for different functional zones.This study confirms the effectiveness of MFOZP in coordinating LUC and provides a scientific reference for LUC research under policy frameworks and the governance of LUC in the BTH region.
文摘In order to solve existing problems about the method of establishing traditional system structure of decision support system(DSS), O S chart is applied to describe object oriented system structure of general DSS, and a new method of eight specific steps is proposed to establish object oriented system structure of DSS by using the method of O S chart, which is applied successfully to the development of the DSS for the energy system ecology engineering research of the Wangheqiu country. Supplying many scientific effective computing models, decision support ways and a lot of accurate reliable decision data, the DSS plays a critical part in helping engineering researchers to make correct decisions. Because the period for developing the DSS is relatively shorter, the new way improves the efficiency of establishing DSS greatly. It also makes the DSS of system structure more flexible and easy to expand.
文摘The concept of intelligent integrated network management (IINM) is briefly introduced. In order to analyze, design and implement IINM successfully, object oriented approach is testified to be an effective and efficient way. In this paper, object oriented technique is applied to the structural model of IINM system, The Domain object class and the MU object class are used to represent the manager and the managed resources. Especially, NM IA is introduced which is a special object class with intelligent behaviors to manage the resources efficiently.
文摘An object oriented data modelling in computer aided design (CAD) databases is focused. Starting with the discussion of data modelling requirements for CAD applications, appropriate data modelling features are introduced herewith. A feasible approach to select the “best” data model for an application is to analyze the data which has to be stored in the database. A data model is appropriate for modelling a given task if the information of the application environment can be easily mapped to the data model. Thus, the involved data are analyzed and then object oriented data model appropriate for CAD applications are derived. Based on the reviewed object oriented techniques applied in CAD, object oriented data modelling in CAD is addressed in details. At last 3D geometrical data models and implementation of their data model using the object oriented method are presented.
文摘This paper discusses the design concept and method about window based and object oriented Graphic User Interface(GUI),and describes the definition of each class in detail. It is developed with Watcom C ++ in DOS environment.The GUI can be redeveloped conveniently and effectively by users.It consists of window,popup menu,icon,button and other components.
基金Project(2009CB226107)supported by the National Basic Research Program of China
文摘An object oriented coal mining land cover classification method based on semantically meaningful image segmentation and image combination of GeoEye imagery and airborne laser scanning(ALS)data was presented.First,DEM,DSM and nDSM(normalized Digital Surface Model,nDSM)were extracted from ALS data.The GeoEye imagery and DSM data were combined to create segmented objects based on neighbor regions merge method.Then 10 kinds of objects were extracted.Different kinds of vegetation objects,including crop,grass,shrub and tree,can be extracted by using NDVI and height value of nDSM.Water and coal pile field was extracted by using NDWI and the standard deviation of DSM method.Height differences also can be used to distinguish buildings from road and vacant land,and accurate building contour information can be extracted by using relationship of neighbor objects and morphological method.The test result shows that the total classification accuracy of the presented method is 90.78%and the kappa coefficient is 0.8914.
文摘The modern war features a highly distributed coordination. In the face of great time constrains, it is important to change command organizations to adapt to the real environment. Therefore it's a key step to set up adaptive C2 teams. In this paper, the relational problems about distributed C2 organizational structure adaptation are discussed, and the methodology for team decision making design based on the object oriented technique is studied.
文摘Image classification is one of the most basic operations of digital image processing. The present review focuses on the strengths and weaknesses of traditional pixel-based classification (PBC) and the advances of object-oriented classification (OOC) algorithms employed for the extraction of information from remotely sensed satellite imageries. The state-of-the-art classifiers are reviewed for their potential usage in urban remote sensing (RS), with a special focus on cryospheric applications. Generally, classifiers for information extraction can be divided into three catalogues: 1) based on the type of learning (supervised and unsupervised), 2) based on assumptions on data distribution (parametric and non-parametric) and, 3) based on the number of outputs for each spatial unit (hard and soft). The classification methods are broadly based on the PBC or the OOC approaches. Both methods have their own advantages and disadvantages depending upon their area of application and most importantly the RS datasets that are used for information extraction. Classification algorithms are variedly explored in the cryosphere for extracting geospatial information for various logistic and scientific applications, such as to understand temporal changes in geographical phenomena. Information extraction in cryospheric regions is challenging, accounting to the very similar and conflicting spectral responses of the features present in the region. The spectral responses of snow and ice, water, and blue ice, rock and shadow are a big challenge for the pixel-based classifiers. Thus, in such cases, OOC approach is superior for extracting information from the cryospheric regions. Also, ensemble classifiers and customized spectral index ratios (CSIR) proved extremely good approaches for information extraction from cryospheric regions. The present review would be beneficial for developing new classifiers in the cryospheric environment for better understanding of spatial-temporal changes over long time scales.
基金Supported by Science and Technology Development Foundation of Shanghai Science and Technology Committee(995107017)
文摘To improve the reusable and configurable ability of computer numerical control ( CNC ) software, a new method to construct reusable model of CNC software with object-oriented (OO) technology is proposed. Based on analyzing function of CNC software, the article presents how to construct a general class library of CNC software with OO technology. Most function modules of CNC software can he reused because of inheritable capability of classes. Besides, the article analyzes the object relational model in request/report mode, and multitask concurrent management model, which can he applied on double-CPU hardware platform and Windows 95/NT environment. Finally, the method has been successfully applied on a turning CNC system and a milling CNC system, and some function modules have been reused.
基金Project supported by the National Natural Science Foundation of China (No. 40271056) Hubei Provin- cial Natural Science Foundation of China (No. 99J123).
文摘A SOTER management system was developed by analyzing, designing, programming, testing, repeated proceeding and progressing based on the object-oriented method. The function of the attribute database management is inherited and expanded in the new system. The integrity and security of the SOTER database are enhanced. The attribute database management, the spatial database management and the model base are integrated into SOTER based on the component object model (COM), and the graphical user interface (GUI) for Windows is used to interact with clients, thus being easy to create and maintain the SOTER, and convenient to promote the quantification and automation of soil information application.
文摘The constraints and the operations play an important role in database generalization.They guide and govern database generalization.The constraints are translation of the required conditions that should take into account not only the objects and relationships among objects but also spatial data schema (classification and aggregation hierarchy) associated with the final existing database.The operations perform the actions of generalization in support of data reduction in the database.The constraints in database generalization are still lack of research.There is still the lack of frameworks to express the constraints and the operations on the basis of object_oriented data structure in database generalization.This paper focuses on the frameworks for generalization operations and constraints on the basis of object_oriented data structure in database generalization.The constraints as the attributes of the object and the operations as the methods of the object can be encapsulated in classes.They have the inheritance and polymorphism property.So the framework of the constraints and the operations which are based on object_oriented data structure can be easily understood and implemented.The constraint and the operations based on object_oriented database are proposed based on object_oriented database.The frameworks for generalization operations,constraints and relations among objects based on object_oriented data structure in database generalization are designed.The categorical database generalization is concentrated on in this paper.
文摘The paper presents a universal fault diagnostic expert system frame work. The frame work is characterized by two basic features. The first includes a fault diagnostic strategy which utilizes the fault classification and checks knowledge about unit under test. The degree of accuracy to which faults are located is improved by using fault classification knowledge. The second characteristic is object oriented inference mechanism using message passing. Object orientation in inference mechanism improved inference efficiency. The developed framework demonstrates its effectiveness and superiority compared to earlier approaches using case studies.
文摘Various code development platforms, such as the ATHENA Framework [1] of the ATLAS [2] experiment encounter lengthy compilation/linking times. To augment this situation, the IRIS Development Platform was built as a software development framework acting as compiler, cross-project linker and data fetcher, which allow hot-swaps in order to compare various versions of software under test. The flexibility fostered by IRIS allowed modular exchange of software libraries among developers, making it a powerful development tool. The IRIS platform used input data ROOT-ntuples [3];however a new data model is sought, in line with the facilities offered by IRIS. The schematic of a possible new data structuring—as a user implemented object oriented data base, is presented.
文摘In the study of oriented bounding boxes(OBB)object detection in high-resolution remote sensing images,the problem of missed and wrong detection of small targets occurs because the targets are too small and have different orientations.Existing OBB object detection for remote sensing images,although making good progress,mainly focuses on directional modeling,while less consideration is given to the size of the object as well as the problem of missed detection.In this study,a method based on improved YOLOv8 was proposed for detecting oriented objects in remote sensing images,which can improve the detection precision of oriented objects in remote sensing images.Firstly,the ResCBAMG module was innovatively designed,which could better extract channel and spatial correlation information.Secondly,the innovative top-down feature fusion layer network structure was proposed in conjunction with the Efficient Channel Attention(ECA)attention module,which helped to capture inter-local cross-channel interaction information appropriately.Finally,we introduced an innovative ResCBAMG module between the different C2f modules and detection heads of the bottom-up feature fusion layer.This innovative structure helped the model to better focus on the target area.The precision and robustness of oriented target detection were also improved.Experimental results on the DOTA-v1.5 dataset showed that the detection Precision,mAP@0.5,and mAP@0.5:0.95 metrics of the improved model are better compared to the original model.This improvement is effective in detecting small targets and complex scenes.
文摘Quickly extraction of building information technology is an important application in urban development planning, electronic information, national defense and others. This paper takes Landsat-8 multispectral and panchromatic data as data source, using the local variance method to select the optimal segmentation scale, normalized difference vegetation index (NDVI) and the normalized building index (NDBI) and panchromatic brightness value of an object oriented classification rule extraction. The high vegetation coverage area of buildings, and through the spatial relationships and distinguishing feature of collections of buildings independent buildings and villages. The results showed that Google earth high resolution image analysis and accuracy evaluation. the results of the extraction based on the overall accuracy of village extraction was 83%, the accuracy of extraction of independent buildings was 70%, according to the L8 remote sensing data, object oriented classification method can quickly and accurately extract the high vegetation coverage area of the building.
文摘Grain-oriented silicon steels were prepared at different heating rates during high temperature annealing,in which the evolution of magnetic properties,grain orientations and precipitates were studied.To illustrate the Zener factor,the diameter and number density of precipitates of interrupted testing samples were statistically calculated.The effect of precipitate ripening on the Goss texture and magnetic property was investigated.Data indicated that the trend of Zener factor was similar under different heating rates,first increasing and then decreasing,and that the precipitate maturing was greatly inhibited as the heating rate increased.Secondary recrystallization was developed at the temperature of 1010℃when a heating rate of 5℃/h was used,resulting in Goss,Brass and{110}<227>oriented grains growing abnormally and a magnetic induction intensity of 1.90T.Furthermore,increasing the heating rate to 20℃/h would inhibit the development of undesirable oriented grains and obtain a sharp Goss texture.However,when the heating rate was extremely fast,such as 40℃/h,poor secondary recrystallization was developed with many island grains,corresponding to a decrease in magnetic induction intensity to 1.87 T.At a suitable heating rate of 20℃/h,the sharpest Goss texture and the highest magnetic induction of 1.94 T with an onset secondary recrystallization temperature of 1020℃were found among the experimental variables in this study.The heating rate affected the initial temperature of secondary recrystallization by controlling the maturation of precipitates,leading to the deviation and dispersion of Goss texture,thereby reducing the magnetic properties.
