Distract In order to solve the current problems in the college English teaching and meet the demands of the 'College English Curriculum Requirements', the Open Model in College English teaching is proposed in ...Distract In order to solve the current problems in the college English teaching and meet the demands of the 'College English Curriculum Requirements', the Open Model in College English teaching is proposed in the thesis. The thesis describes the model from the five components.展开更多
Glacier mass balance is a key indicator of glacier health and climate change sensitivity.Influencing factors include both climatic and nonclimatic elements,forming a complex set of drivers.There is a lack of quantitat...Glacier mass balance is a key indicator of glacier health and climate change sensitivity.Influencing factors include both climatic and nonclimatic elements,forming a complex set of drivers.There is a lack of quantitative analysis of these composite factors,particularly in climate-typical regions like the Tanggula Mountains on the central Tibetan Plateau.We collected data on various factors affecting glacier mass balance from 2000 to 2020,including climate variables,topographic variables,geometric parameters,and glacier dynamics.We utilized linear regression models,ensemble learning models,and Open Global Glacier Model(OGGM)to analyze glacier mass balance changes in the Tanggula Mountains.Results indicate that linear models explain 58%of the variance in glacier mass balance,with seasonal temperature and precipitation having significant impacts.Our findings show that ensemble learning models made the explanations 5.2%more accurate by including the impact of topographic and geometric factors such as the average glacier height,the slope of the glacier tongue,the speed of the ice flow,and the area of the glacier.Interpretable machine learning identified the spatial distribution of positive and negative impacts of these characteristics and the interaction between glacier topography and ice dynamics.Finally,we predicted the responses of glaciers of different sizes to future climate change based on the results of interpretable machine learning.It was found that relatively large glaciers(>1 km~2)are likely to persist until the end of this century under low emission scenarios,whereas small glaciers(<1 km~2)are expected to nearly disappear by 2080 under any emission scenario.Our research provides technical support for improving glacier change modeling and protection on the Tibetan Plateau.展开更多
The current research of state of charge(SoC) online estimation of lithium-ion battery(LiB) in electric vehicles(EVs)mainly focuses on adopting or improving of battery models and estimation filters. However, little att...The current research of state of charge(SoC) online estimation of lithium-ion battery(LiB) in electric vehicles(EVs)mainly focuses on adopting or improving of battery models and estimation filters. However, little attention has been paid to the accuracy of various open circuit voltage(OCV) models for correcting the SoC with aid of the ampere-hour counting method. This paper presents a comprehensive comparison study on eighteen OCV models which cover the majority of models used in literature. The low-current OCV tests are conducted on the typical commercial LiFePO/graphite(LFP) and LiNiMnCoO/graphite(NMC) cells to obtain the experimental OCV-SoC curves at different ambient temperature and aging stages. With selected OCV and SoC points from experimental OCV-SoC curves, the parameters of each OCV model are determined by curve fitting toolbox of MATLAB 2013. Then the fitting OCV-SoC curves based on diversified OCV models are also obtained. The indicator of root-mean-square error(RMSE) between the experimental data and fitted data is selected to evaluate the adaptabilities of these OCV models for their main features, advantages,and limitations. The sensitivities of OCV models to ambient temperatures, aging stages, numbers of data points,and SoC regions are studied for both NMC and LFP cells. Furthermore, the influences of these models on SoC estimation are discussed. Through a comprehensive comparison and analysis on OCV models, some recommendations in selecting OCV models for both NMC and LFP cells are given.展开更多
The study of flow diversions in open channels plays an important practical role in the design and management of open-channel networks for irrigation or drainage. To accurately predict the mean flow and turbulence char...The study of flow diversions in open channels plays an important practical role in the design and management of open-channel networks for irrigation or drainage. To accurately predict the mean flow and turbulence characteristics of open-channel dividing flows, a hybrid LES-RANS model, which combines the large eddy simulation （LES） model with the Reynolds-averaged Navier-Stokes （RANS） model, is proposed in the present study. The unsteady RANS model was used to simulate the upstream and downstream regions of a main channel, as well as the downstream region of a branch channel. The LES model was used to simulate the channel diversion region, where turbulent flow characteristics are complicated. Isotropic velocity fluctuations were added at the inflow interface of the LES region to trigger the generation of resolved turbulence. A method based on the virtual body force is proposed to impose Reynolds-averaged velocity fields near the outlet of the LES region in order to take downstream flow effects computed by the RANS model into account and dissipate the excessive turbulent fluctuations. This hybrid approach saves computational effort and makes it easier to properly specify inlet and outlet boundary conditions. Comparison between computational results and experimental data indicates that this relatively new modeling approach can accurately predict open-channel T-diversion flows.展开更多
We developed a Global Ocean Circulation and Tide Model （GOCTM） with coarse grids in the open deep ocean degrading ‘smoothly’ into the highly resolved China Seas （CS） of refined grids to study the tides and circu...We developed a Global Ocean Circulation and Tide Model （GOCTM） with coarse grids in the open deep ocean degrading ‘smoothly’ into the highly resolved China Seas （CS） of refined grids to study the tides and circulation there.GOCTM is based on the framework of the Finite Volume approach for better mass conservation through improved transports across the discrete individual control volume.It also takes a full advantage of the geometric flexibility of unstructured mesh using a realistic global topography including the Arctic Ocean.The CS are given a special focus by refining the unstructured grids,but they are embedded into global domain naturally.Furthermore,GOCTM not only successfully avoids the treatment of the open boundaries,but also optimizes the trade-off between computational cost and model accuracy.Meanwhile,GOCTM is driven by the astronomical tide-generating potential and the secondary tide-generating potential directly,together with the wind stress and heat flux.GOCTM succeeds in reproducing the global eight principal tidal harmonic constants.Particularly,the simulated tidal results in the CS are improved compared to some other regional models with the discrepancy of 3.9 cm for M 2 tide.This idea of GOCTM can also be referred for other regional ocean study.展开更多
Stress-induced failure is among the most common causes of instability in Canadian deep underground mines.Open stoping is the most widely practiced underground excavation method in these mines,and creates large stopes ...Stress-induced failure is among the most common causes of instability in Canadian deep underground mines.Open stoping is the most widely practiced underground excavation method in these mines,and creates large stopes which are subjected to stress-induced failure.The probability of failure(POF)depends on many factors,of which the geometry of an open stope is especially important.In this study,a methodology is proposed to assess the effect of stope geometrical parameters on the POF,using numerical modelling.Different ranges for each input parameter are defined according to previous surveys on open stope geometry in a number of Canadian underground mines.A Monte-Carlo simulation technique is combined with the finite difference code FLAC3D,to generate model realizations containing stopes with different geometrical features.The probability of failure(POF)for different categories of stope geometry,is calculated by considering two modes of failure;relaxation-related gravity driven(tensile)failure and rock mass brittle failure.The individual and interactive effects of stope geometrical parameters on the POF,are analyzed using a general multi-level factorial design.Finally,mathematical optimization techniques are employed to estimate the most stable stope conditions,by determining the optimal ranges for each stope’s geometrical parameter.展开更多
The paper proposes an open model for human computer interaction. It divides the interactive system into six layers: I/O media, concept, semantic/syntax, domain, mode/style, and computation, and adopts knowledge to rep...The paper proposes an open model for human computer interaction. It divides the interactive system into six layers: I/O media, concept, semantic/syntax, domain, mode/style, and computation, and adopts knowledge to represent functions of the layers. The paper outlines the open model and the knowledge used within each layer. The characteristics are also discussed. An example dialogue is given to clarify the idea.展开更多
It has been found that there are marked errors in the value of valid opening size of heat-bonded nonwoven fabrics between theoretical calculations and engineering measurements. A new modified theoretical model is adva...It has been found that there are marked errors in the value of valid opening size of heat-bonded nonwoven fabrics between theoretical calculations and engineering measurements. A new modified theoretical model is advanced in this paper. The equivalent diameter of the pore of a fibre web is used to calculate the valid opening size instead of the maximum diameter of inscribed circle used, because the fibres in practical fibre webs are flexible elastomers with definite diameters and the pore of fibre web may produce deformation in screening teat and engineering usage. The results show that the theoretical calculations coincide well with the engineering measurements. This method offers a theoretical basis for computer simulation to the performance of filters of heatbonded nonwoven fabrics.展开更多
Open boundary conditions （OBCs） for a regional ocean model that can be integrated stably over a long timeframe, as well as satisfy the volume, heat and salinity conservation constraints, were developed. First, the i...Open boundary conditions （OBCs） for a regional ocean model that can be integrated stably over a long timeframe, as well as satisfy the volume, heat and salinity conservation constraints, were developed. First, the idea that the inward and outward flux information can be treated separately in the OBCs was adopted. Second, in order to maintain the property that the volume, heat and salinity remains conserved in the simulation domain, conservation constraints were added to the OBCs, and an inverse method utilized to solve the constraint equations. Ideal experiments were designed to investigate the conservation property, and the OBCs were found to work efficiently to maintain the volume, heat and salinity conservation. It was found that simulations were comparable to observations when the OBCs were applied to a regional ocean model.展开更多
Two experimental tests of three-storied reinforced concrete structural walls having large openings were performed.Based on an original macro model,a multiple modified macro-model was proposed to develop a simple metho...Two experimental tests of three-storied reinforced concrete structural walls having large openings were performed.Based on an original macro model,a multiple modified macro-model was proposed to develop a simple method to design a reinforced concrete structural wall with large openings and various opening locations.The interaction between reinforcement ties and concrete struts formed along the perimeter of openings was neglected in the original model.However,the strut-and-tie node was proposed to take account of such interaction in the proposed model.The predicted behavior of two specimens using such a proposed model was compared with the experimental results.It is shown that the behavior of structural walls with large openings could be modeled well using the proposed model.Moreover,the study indicates that the proposed model is applicable even in cases of multi-story structural walls having large openings and various opening locations.展开更多
A new architecture based on open-architecture CNC of an integrated measuring,modeling and manufacturing system is presented. A 3-axis vertical milling structure is used to achieve the manufacturing function. And a com...A new architecture based on open-architecture CNC of an integrated measuring,modeling and manufacturing system is presented. A 3-axis vertical milling structure is used to achieve the manufacturing function. And a computer vision camera is to be set up on the holder of the milling machine to capture the images of the work-piece and a image data acquisition card is used to translate the image data to the control computer,which acts as the measuring subsystem. Through processing the image data the model of the work-piece is established which plays the role of modeling subsystem. A motion control card is inserted into an industry computer to construct an open CNC system of the type of NC embedded PC which is more sophisticated than other new technologies on open CNC. The embedded motion card burdens the real-time tasks of the system and the IPC does the other management and planning tasks. The IPC together with the motion control card command the three axes of the system to accomplish the manufacturing and measuring functions and further the modeling function.展开更多
In this paper, the structure characteristics of open complex giant systems are concretely analysed in depth, thus the view and its significance to support the meta synthesis engineering with manifold knowledge models...In this paper, the structure characteristics of open complex giant systems are concretely analysed in depth, thus the view and its significance to support the meta synthesis engineering with manifold knowledge models are clarified. Furthermore, the knowledge based multifaceted modeling methodology for open complex giant systems is emphatically studied. The major points are as follows: (1) nonlinear mechanism and general information partition law; (2) from the symmetry and similarity to the acquisition of construction knowledge; (3) structures for hierarchical and nonhierarchical organizations; (4) the integration of manifold knowledge models; (5) the methodology of knowledge based multifaceted modeling.展开更多
For submerged vegetated flow, the velocity profile has two distinctive distributions in the vegetation layer in the lower region and the surface layer in the upper non-vegetated region. Based on a mixing-layer analogy...For submerged vegetated flow, the velocity profile has two distinctive distributions in the vegetation layer in the lower region and the surface layer in the upper non-vegetated region. Based on a mixing-layer analogy, different analytical models have been proposed for the velocity profile in the two layers. This paper evaluates the four analytical models of Klopstra et al., Defina & Bixio, Yang et al. and Nepf against a wide range of independent experimental data available in the literature. To test the applicability and robust of the models, the author used the 19 datasets with various relative depths of submergence, different vegetation densities and bed slopes (1.8 × 10?6 - 4.0 × 10?3). This study shows that none of the models can predict the velocity profiles well for all datasets. The three models except Yang’s model performed reasonably well in certain cases, but Yang’s model failed in most the cases studied. It was also found that the Defina model is almost the same as the Klopstra model, if the same mixing length scale of eddies (λ) is used. Finally, close examination of the mixing length scale of eddies (λ) in the Defina model showed that when λ/h = 1/40(H/h)1/2, this model can predict velocity profiles well for all the datasets used.展开更多
A new method was put forward to make up the three-dimensional deposit model, and the spatiotemporal models of open-pit with temporal dynamics were also studied combined with the corrected models of multilevel ground s...A new method was put forward to make up the three-dimensional deposit model, and the spatiotemporal models of open-pit with temporal dynamics were also studied combined with the corrected models of multilevel ground states so as to bring the three-dimensional open-pit model at different time and its model serial formed from the evolvement into the management of temporal dimension in order to realize the spatial three-dimension and temporal dynamic for the mining management in open-pits,which makes this model easy to query and analyze 3-D information, also help surface mining replaying and stope evolution forecasting. Finally, the time-spatial model was established to show the dynamic mining on some open-pit under the windows XP and VC++ environment.展开更多
This paper analyzes an open pit gold mine project based on the O'Hara cost model. Hypothetical data is proposed based on different authors that have studied open pit gold projects, and variations are proposed acco...This paper analyzes an open pit gold mine project based on the O'Hara cost model. Hypothetical data is proposed based on different authors that have studied open pit gold projects, and variations are proposed according to the probability distributions associated to key variables affecting the NPV, like production level, ore grade, price of ore, and others, so as to see what if, in a gold open pit mine project of 3000 metric tons per day of ore. Two case scenarios were analyzed to simulate the NPV, one where there is low certainty data available, and the other where the information available is of high certainty. Results based on genetic algorithm metaheuristic simulations, which combine basically Montecarlo simulations provided by the Palisade Risk software, the O'Hara cost model, net smelter return and financial analysis tools offered by Excel are reported, in order to determine to which variables of the project is more sensitive the NPV.展开更多
A growing interest has been devoted to the contra-rotating propellers （CRPs） due to their high propulsive efficiency, torque balance, low fuel consumption, low cavitations, low noise performance and low hull vibrati...A growing interest has been devoted to the contra-rotating propellers （CRPs） due to their high propulsive efficiency, torque balance, low fuel consumption, low cavitations, low noise performance and low hull vibration. Compared with the single-screw system, it is more difficult for the open water performance prediction because forward and aft propellers interact with each other and generate a more complicated flow field around the CRPs system. The current work focuses on the open water performance prediction of contra-rotating propellers by RANS and sliding mesh method considering the effect of computational time step size and turbulence model. The validation study has been performed on two sets of contra-rotating propellers developed by David W Taylor Naval Ship R ＆ D center. Compared with the experimental data, it shows that RANS with sliding mesh method and SST k-ω turbulence model has a good precision in the open water performance prediction of contra-rotating propellers, and small time step size can improve the level of accuracy for CRPs with the same blade number of forward and aft propellers, while a relatively large time step size is a better choice for CRPs with different blade numbers.展开更多
文摘Distract In order to solve the current problems in the college English teaching and meet the demands of the 'College English Curriculum Requirements', the Open Model in College English teaching is proposed in the thesis. The thesis describes the model from the five components.
基金funding from the National Key Research and Development Program of China(2023YFC3206300)the Gansu Provincial Science and Technology Program(22ZD6FA005)+2 种基金the Gansu Youth Science and Technology Fund(E4310103)the Gansu Postdoctoral Science Foundation(E339880112)the Tibet Science and Technology Program(XZ202301ZY0001G and XZ202401JD0007)。
文摘Glacier mass balance is a key indicator of glacier health and climate change sensitivity.Influencing factors include both climatic and nonclimatic elements,forming a complex set of drivers.There is a lack of quantitative analysis of these composite factors,particularly in climate-typical regions like the Tanggula Mountains on the central Tibetan Plateau.We collected data on various factors affecting glacier mass balance from 2000 to 2020,including climate variables,topographic variables,geometric parameters,and glacier dynamics.We utilized linear regression models,ensemble learning models,and Open Global Glacier Model(OGGM)to analyze glacier mass balance changes in the Tanggula Mountains.Results indicate that linear models explain 58%of the variance in glacier mass balance,with seasonal temperature and precipitation having significant impacts.Our findings show that ensemble learning models made the explanations 5.2%more accurate by including the impact of topographic and geometric factors such as the average glacier height,the slope of the glacier tongue,the speed of the ice flow,and the area of the glacier.Interpretable machine learning identified the spatial distribution of positive and negative impacts of these characteristics and the interaction between glacier topography and ice dynamics.Finally,we predicted the responses of glaciers of different sizes to future climate change based on the results of interpretable machine learning.It was found that relatively large glaciers(>1 km~2)are likely to persist until the end of this century under low emission scenarios,whereas small glaciers(<1 km~2)are expected to nearly disappear by 2080 under any emission scenario.Our research provides technical support for improving glacier change modeling and protection on the Tibetan Plateau.
基金Supported by National Natural Science Foundation of China(Grant No.51507012)Beijing Municipal Natural Science Foundation of China(Grant No.3182035)
文摘The current research of state of charge(SoC) online estimation of lithium-ion battery(LiB) in electric vehicles(EVs)mainly focuses on adopting or improving of battery models and estimation filters. However, little attention has been paid to the accuracy of various open circuit voltage(OCV) models for correcting the SoC with aid of the ampere-hour counting method. This paper presents a comprehensive comparison study on eighteen OCV models which cover the majority of models used in literature. The low-current OCV tests are conducted on the typical commercial LiFePO/graphite(LFP) and LiNiMnCoO/graphite(NMC) cells to obtain the experimental OCV-SoC curves at different ambient temperature and aging stages. With selected OCV and SoC points from experimental OCV-SoC curves, the parameters of each OCV model are determined by curve fitting toolbox of MATLAB 2013. Then the fitting OCV-SoC curves based on diversified OCV models are also obtained. The indicator of root-mean-square error(RMSE) between the experimental data and fitted data is selected to evaluate the adaptabilities of these OCV models for their main features, advantages,and limitations. The sensitivities of OCV models to ambient temperatures, aging stages, numbers of data points,and SoC regions are studied for both NMC and LFP cells. Furthermore, the influences of these models on SoC estimation are discussed. Through a comprehensive comparison and analysis on OCV models, some recommendations in selecting OCV models for both NMC and LFP cells are given.
文摘The study of flow diversions in open channels plays an important practical role in the design and management of open-channel networks for irrigation or drainage. To accurately predict the mean flow and turbulence characteristics of open-channel dividing flows, a hybrid LES-RANS model, which combines the large eddy simulation （LES） model with the Reynolds-averaged Navier-Stokes （RANS） model, is proposed in the present study. The unsteady RANS model was used to simulate the upstream and downstream regions of a main channel, as well as the downstream region of a branch channel. The LES model was used to simulate the channel diversion region, where turbulent flow characteristics are complicated. Isotropic velocity fluctuations were added at the inflow interface of the LES region to trigger the generation of resolved turbulence. A method based on the virtual body force is proposed to impose Reynolds-averaged velocity fields near the outlet of the LES region in order to take downstream flow effects computed by the RANS model into account and dissipate the excessive turbulent fluctuations. This hybrid approach saves computational effort and makes it easier to properly specify inlet and outlet boundary conditions. Comparison between computational results and experimental data indicates that this relatively new modeling approach can accurately predict open-channel T-diversion flows.
基金The Hi-tech Research and Development Program (863) of China under contract No.2007AA09Z117the National Key Technology R&D Program under contract No.2011BAC03B02+1 种基金the National Natural Science Fund of China under contract No.40976001the National Marine Renewable Energy Program under contract Nos GHME2010ZC08,No.GHME 2010ZC11 and No.GHME2010ZC01
文摘We developed a Global Ocean Circulation and Tide Model （GOCTM） with coarse grids in the open deep ocean degrading ‘smoothly’ into the highly resolved China Seas （CS） of refined grids to study the tides and circulation there.GOCTM is based on the framework of the Finite Volume approach for better mass conservation through improved transports across the discrete individual control volume.It also takes a full advantage of the geometric flexibility of unstructured mesh using a realistic global topography including the Arctic Ocean.The CS are given a special focus by refining the unstructured grids,but they are embedded into global domain naturally.Furthermore,GOCTM not only successfully avoids the treatment of the open boundaries,but also optimizes the trade-off between computational cost and model accuracy.Meanwhile,GOCTM is driven by the astronomical tide-generating potential and the secondary tide-generating potential directly,together with the wind stress and heat flux.GOCTM succeeds in reproducing the global eight principal tidal harmonic constants.Particularly,the simulated tidal results in the CS are improved compared to some other regional models with the discrepancy of 3.9 cm for M 2 tide.This idea of GOCTM can also be referred for other regional ocean study.
基金funded by a grant from Natural Sciences and Engineering Research Council of Canada (NSERC)the authors would like to acknowledge the Niobec mine (Saint-Honoré, QuébecQuébec)
文摘Stress-induced failure is among the most common causes of instability in Canadian deep underground mines.Open stoping is the most widely practiced underground excavation method in these mines,and creates large stopes which are subjected to stress-induced failure.The probability of failure(POF)depends on many factors,of which the geometry of an open stope is especially important.In this study,a methodology is proposed to assess the effect of stope geometrical parameters on the POF,using numerical modelling.Different ranges for each input parameter are defined according to previous surveys on open stope geometry in a number of Canadian underground mines.A Monte-Carlo simulation technique is combined with the finite difference code FLAC3D,to generate model realizations containing stopes with different geometrical features.The probability of failure(POF)for different categories of stope geometry,is calculated by considering two modes of failure;relaxation-related gravity driven(tensile)failure and rock mass brittle failure.The individual and interactive effects of stope geometrical parameters on the POF,are analyzed using a general multi-level factorial design.Finally,mathematical optimization techniques are employed to estimate the most stable stope conditions,by determining the optimal ranges for each stope’s geometrical parameter.
文摘The paper proposes an open model for human computer interaction. It divides the interactive system into six layers: I/O media, concept, semantic/syntax, domain, mode/style, and computation, and adopts knowledge to represent functions of the layers. The paper outlines the open model and the knowledge used within each layer. The characteristics are also discussed. An example dialogue is given to clarify the idea.
文摘It has been found that there are marked errors in the value of valid opening size of heat-bonded nonwoven fabrics between theoretical calculations and engineering measurements. A new modified theoretical model is advanced in this paper. The equivalent diameter of the pore of a fibre web is used to calculate the valid opening size instead of the maximum diameter of inscribed circle used, because the fibres in practical fibre webs are flexible elastomers with definite diameters and the pore of fibre web may produce deformation in screening teat and engineering usage. The results show that the theoretical calculations coincide well with the engineering measurements. This method offers a theoretical basis for computer simulation to the performance of filters of heatbonded nonwoven fabrics.
基金funded by the Strategic Priority Research Program of the Chinese Academy of Sciences with Grant No.XDA11010304supported by National Natural Science Foundation of China(No.41376026 and 40776009)
文摘Open boundary conditions （OBCs） for a regional ocean model that can be integrated stably over a long timeframe, as well as satisfy the volume, heat and salinity conservation constraints, were developed. First, the idea that the inward and outward flux information can be treated separately in the OBCs was adopted. Second, in order to maintain the property that the volume, heat and salinity remains conserved in the simulation domain, conservation constraints were added to the OBCs, and an inverse method utilized to solve the constraint equations. Ideal experiments were designed to investigate the conservation property, and the OBCs were found to work efficiently to maintain the volume, heat and salinity conservation. It was found that simulations were comparable to observations when the OBCs were applied to a regional ocean model.
基金Project supported by the Grants-in-Aid for Scientific Research of Japan (No. 16206056)the Scientific Research Foundation for Talent Introduction (No. 113201-811132)
文摘Two experimental tests of three-storied reinforced concrete structural walls having large openings were performed.Based on an original macro model,a multiple modified macro-model was proposed to develop a simple method to design a reinforced concrete structural wall with large openings and various opening locations.The interaction between reinforcement ties and concrete struts formed along the perimeter of openings was neglected in the original model.However,the strut-and-tie node was proposed to take account of such interaction in the proposed model.The predicted behavior of two specimens using such a proposed model was compared with the experimental results.It is shown that the behavior of structural walls with large openings could be modeled well using the proposed model.Moreover,the study indicates that the proposed model is applicable even in cases of multi-story structural walls having large openings and various opening locations.
文摘A new architecture based on open-architecture CNC of an integrated measuring,modeling and manufacturing system is presented. A 3-axis vertical milling structure is used to achieve the manufacturing function. And a computer vision camera is to be set up on the holder of the milling machine to capture the images of the work-piece and a image data acquisition card is used to translate the image data to the control computer,which acts as the measuring subsystem. Through processing the image data the model of the work-piece is established which plays the role of modeling subsystem. A motion control card is inserted into an industry computer to construct an open CNC system of the type of NC embedded PC which is more sophisticated than other new technologies on open CNC. The embedded motion card burdens the real-time tasks of the system and the IPC does the other management and planning tasks. The IPC together with the motion control card command the three axes of the system to accomplish the manufacturing and measuring functions and further the modeling function.
文摘In this paper, the structure characteristics of open complex giant systems are concretely analysed in depth, thus the view and its significance to support the meta synthesis engineering with manifold knowledge models are clarified. Furthermore, the knowledge based multifaceted modeling methodology for open complex giant systems is emphatically studied. The major points are as follows: (1) nonlinear mechanism and general information partition law; (2) from the symmetry and similarity to the acquisition of construction knowledge; (3) structures for hierarchical and nonhierarchical organizations; (4) the integration of manifold knowledge models; (5) the methodology of knowledge based multifaceted modeling.
文摘For submerged vegetated flow, the velocity profile has two distinctive distributions in the vegetation layer in the lower region and the surface layer in the upper non-vegetated region. Based on a mixing-layer analogy, different analytical models have been proposed for the velocity profile in the two layers. This paper evaluates the four analytical models of Klopstra et al., Defina & Bixio, Yang et al. and Nepf against a wide range of independent experimental data available in the literature. To test the applicability and robust of the models, the author used the 19 datasets with various relative depths of submergence, different vegetation densities and bed slopes (1.8 × 10?6 - 4.0 × 10?3). This study shows that none of the models can predict the velocity profiles well for all datasets. The three models except Yang’s model performed reasonably well in certain cases, but Yang’s model failed in most the cases studied. It was also found that the Defina model is almost the same as the Klopstra model, if the same mixing length scale of eddies (λ) is used. Finally, close examination of the mixing length scale of eddies (λ) in the Defina model showed that when λ/h = 1/40(H/h)1/2, this model can predict velocity profiles well for all the datasets used.
基金Project(LS2010071)supported by the Key Laboratory Projects in Universities’Scientific Research Plan of Education Department of Liaoning Province,China
文摘A new method was put forward to make up the three-dimensional deposit model, and the spatiotemporal models of open-pit with temporal dynamics were also studied combined with the corrected models of multilevel ground states so as to bring the three-dimensional open-pit model at different time and its model serial formed from the evolvement into the management of temporal dimension in order to realize the spatial three-dimension and temporal dynamic for the mining management in open-pits,which makes this model easy to query and analyze 3-D information, also help surface mining replaying and stope evolution forecasting. Finally, the time-spatial model was established to show the dynamic mining on some open-pit under the windows XP and VC++ environment.
基金the Mine Planning Research Group–GIPLAMIN-of the Mines Faculty,National University of Colombia
文摘This paper analyzes an open pit gold mine project based on the O'Hara cost model. Hypothetical data is proposed based on different authors that have studied open pit gold projects, and variations are proposed according to the probability distributions associated to key variables affecting the NPV, like production level, ore grade, price of ore, and others, so as to see what if, in a gold open pit mine project of 3000 metric tons per day of ore. Two case scenarios were analyzed to simulate the NPV, one where there is low certainty data available, and the other where the information available is of high certainty. Results based on genetic algorithm metaheuristic simulations, which combine basically Montecarlo simulations provided by the Palisade Risk software, the O'Hara cost model, net smelter return and financial analysis tools offered by Excel are reported, in order to determine to which variables of the project is more sensitive the NPV.
基金supported by the National Natural Science Foundation of China(Grant No.51079157)
文摘A growing interest has been devoted to the contra-rotating propellers （CRPs） due to their high propulsive efficiency, torque balance, low fuel consumption, low cavitations, low noise performance and low hull vibration. Compared with the single-screw system, it is more difficult for the open water performance prediction because forward and aft propellers interact with each other and generate a more complicated flow field around the CRPs system. The current work focuses on the open water performance prediction of contra-rotating propellers by RANS and sliding mesh method considering the effect of computational time step size and turbulence model. The validation study has been performed on two sets of contra-rotating propellers developed by David W Taylor Naval Ship R ＆ D center. Compared with the experimental data, it shows that RANS with sliding mesh method and SST k-ω turbulence model has a good precision in the open water performance prediction of contra-rotating propellers, and small time step size can improve the level of accuracy for CRPs with the same blade number of forward and aft propellers, while a relatively large time step size is a better choice for CRPs with different blade numbers.
