1-Isoquinolin-1(2H)-one skeleton exists widely in natural products,pharmaceuticals and materials.We disclose here a fluorine effect and catalyst cooperatively induced regioselective or regiospecific 3,4-functionalizat...1-Isoquinolin-1(2H)-one skeleton exists widely in natural products,pharmaceuticals and materials.We disclose here a fluorine effect and catalyst cooperatively induced regioselective or regiospecific 3,4-functionalization of unsymmetric 2-CF_(3)-1,3-enynes.The presence of trifluoromethyl group is determinable for the regioselectivity.When the CF_(3) group was replaced with the methyl or amide group,the regioselectivity decreased to a ratio of 1.3:1 or 1:1.7,respectively.For alkyl substitutedβ-CF_(3)-1,3-enynes,a regiospecificity was obtained.This strategy features excellent regioselectivity,broad substrate scope and high functional group tolerance.Mechanistic studies showed that C–H bond activation is the rate-limiting step.展开更多
A series of 2,3-dihydroquinazolin-4（1H）-ones have been synthesized in good to excellent yields through direct cyclocondensation of anthranilamide and aryl aldehydes or ketones in water or methanol under mild conditi...A series of 2,3-dihydroquinazolin-4（1H）-ones have been synthesized in good to excellent yields through direct cyclocondensation of anthranilamide and aryl aldehydes or ketones in water or methanol under mild conditions.The reaction was efficiently promoted by 10 mol%sulfamic acid（SA,H_2NSO_3H） and the catalyst could be recovered easily after the reactions and reused without evident loss of reactivity.展开更多
The activation of adsorbed CO is an important step in CO hydrogenation. The results from TPSR of pre-adsorbed CO with H2 and syngas suggested that the presence of H2 increased the amount of CO adsorption and accelerat...The activation of adsorbed CO is an important step in CO hydrogenation. The results from TPSR of pre-adsorbed CO with H2 and syngas suggested that the presence of H2 increased the amount of CO adsorption and accelerated CO dissociation. The H2 was adsorbed first, and activated to form H＊ over metal sites, then reacted with carbonaceous species. The oxygen species for CO2 formation in the presence of hydrogen was mostly OH^＊, which reacted with adsorbed CO subsequently via CO^＊＋OH^＊ → CO2^＊＋H^＊; however, the direct CO dissociation was not excluded in CO hydrogenation. The dissociation of C-O bond in the presence of H2 proceeded by a concerted mechanism, which assisted the Boudourd reaction of adsorbed CO on the surface via CO^＊＋2H^＊ → CH^＊＋OH^＊. The formation of the surface species （CH） from adsorbed CO proceeded as indicated with the participation of surface hydrogen, was favored in the initial step of the Fischer-Tropsch synthesis.展开更多
In this investigation, Pt–Ba–Ce/c-Al2O3 catalysts were prepared by incipient wetness impregnation and experiments were performed to evaluate the influence of H2 on the evolution mechanism of nitrogen oxides (NOx) st...In this investigation, Pt–Ba–Ce/c-Al2O3 catalysts were prepared by incipient wetness impregnation and experiments were performed to evaluate the influence of H2 on the evolution mechanism of nitrogen oxides (NOx) storage and reduction (NSR). The physical and chemical properties of the Pt–Ba–Ce/c- Al2O3 catalysts were studied using a combination of characterization techniques, which showed that PtOx, CeO2, and BaCO3, whose peaks were observed in X-ray diffraction (XRD) spectra, dispersed well on the c-Al2O3, as shown by transmission electron microscope (TEM), and that the difference between Ce3+ and Ce4+, as detected by X-ray photoelectron spectroscopy (XPS), facilitated the migration of active oxygen over the catalyst. In the process of a complete NSR experiment, the NOx storage capability was greatly enhanced in the temperature range of 250–350℃, and reached a maximum value of 315.3μmol·gcat^-1 at 350℃, which was ascribed to the increase in NO2 yield. In a lean and rich cycling experiment, the results showed that NOx storage efficiency and conversion were increased when the time of H2 exposure (i.e., 30, 45, and 60 s) was extended. The maximum NOx conversion of the catalyst reached 83.5% when the duration of the lean and rich phases was 240 and 60 s, respectively. The results revealed that increasing the content of H2 by an appropriate amount was favorable to the NSR mechanism due to increased decomposition of nitrate or nitrite, and the refreshing of trapping sites for the next cycle of NSR.展开更多
A series of heteropoly acid (HPA) based Al2O3 catalysts with three-dimensional ordered (3DOM) structure were synthesized by colloidal crystal template method.Interconnected macropores (250 nm) could be clearly observe...A series of heteropoly acid (HPA) based Al2O3 catalysts with three-dimensional ordered (3DOM) structure were synthesized by colloidal crystal template method.Interconnected macropores (250 nm) could be clearly observed by scanning electron microscope (SEM) and transmission electron microscope (TEM).Mesopores could be detected by N2 adsorption-desorption isotherms which further confirmed the 3DOM structural characteristics of catalyst.Moreover,Keggin-type HPW was highly dispersed in the Al2O3 framework,which suggested by powder X-ray diffraction (XRD) and Fourier transform infrared spectra (FT-IR) results.The oxidation desulfurization (ODS) performance of 3DOM H3PW12O40/Al2O3 of refractory sulphur compounds was evaluated in the presence of hydrogen peroxide.It oxidized 98.5% of dibenzothiophene (DBT) into corresponding sulfone within 3 h,which exhibited superior ODS performance than corresponding mesoporous and microporous H3PW12O40/Al2O3 catalyst.The enhancement of ODS efficiency is related to the improvement of mass transfer of DBT in the pore channel resulting from the interconnected 3DOM structure.Furthermore,the as-prepared catalyst still demonstrates outstanding cycle performance after 6 runs,which could be easily recovered from the model fuel.展开更多
The purpose of this study was to investigate the effect of preadsorbed CO at different temperatures, calcination temperatures, the combined influence of reduction temperature and time, and pretreatment using hydrogen ...The purpose of this study was to investigate the effect of preadsorbed CO at different temperatures, calcination temperatures, the combined influence of reduction temperature and time, and pretreatment using hydrogen or syngas as reduction agents on the F-T synthesis （FTS） activity and selectivity of Co/Al2O3 catalyst. The reactivity of the carbon species at higher preadsorption temperature with H2 in TPSR decreased, whereas the carbon-containing species showed higher reactivity over Co/Al2O3 catalyst with low calcination temperature. This agreed well with the order of catalytic activity for F-T synthesis on this catalyst. The catalytic activity of the catalyst varied with reduction temperature and time remarkably. CODEX optimization gave an optimum reduction temperature of 756 K and reduction time of 6.2 h and estimated C5＋ yield perfectly. The pretreatment of Co/Al2O3 catalyst with different reduction agents （hydrogen or syngas） showed important influences on the catalytic performance. A high CO conversion and C5＋ yield were obtained on the catalyst reduced by hydrogen, whereas methane selectivity on the catalyst reduced by syngas was much higher than that on the catalyst reduced by hydrogen.展开更多
A series of 3.0Mo/(Hβ+γ-Al_(2)O_(3))samples withγ-Al_(2)O_(3)contents in the range of 0_100%(mass fraction)was studied by means of XRD,NH_(3)-TPD,TPR and BET determinations for characterizing their structures.The H...A series of 3.0Mo/(Hβ+γ-Al_(2)O_(3))samples withγ-Al_(2)O_(3)contents in the range of 0_100%(mass fraction)was studied by means of XRD,NH_(3)-TPD,TPR and BET determinations for characterizing their structures.The Hβzeolite structure in the 3.0Mo/Hβsample can be effectively stabilized by adding someγ-Al_(2)O_(3)to Hβzeolite.γ-Al_(2)O_(3)mainly favors the formation of polymolybdate or multilayered Mo oxide,while Hβmainly forms the Al_(2)(MoO_(4))_(3)species,as evaluated by the TPR technique.When used as the catalyst for the metathesis of butylene-2 and ethylene to propylene,there exists a close correlation between the specific surface area and stability of the catalyst.The specific surface area of the catalyst shows the maximum when{(Hβ+}γ-Al_(2)O_(3))contains 30%γ-Al_(2)O_(3),which is in agreement with that of the time needed for the reaction stablization.In the case of maximum surface area,the rate of coke deposition is the minimum.展开更多
Excess crude glycerol derived as a by-product from biodiesel industry prompts the need to valorise glycerol to value-added chemicals.In this context,catalytic steam reforming of glycerol(SRG) was proposed as a promisi...Excess crude glycerol derived as a by-product from biodiesel industry prompts the need to valorise glycerol to value-added chemicals.In this context,catalytic steam reforming of glycerol(SRG) was proposed as a promising and sustainable alternative for producing renewable hydrogen(H2).Herein,the development of nickel(Ni) supported on ceria-modified mesoporous γ-alumina(γ-Al2 O3) catalysts and their applications in catalytic SRG(at550-750℃ atmospheric pressure and weight hourly space velocity,WHSV,of 44,122 ml·g^-1·h^-1(STP)) is presented.Properties of the developed catalysts were characterised using many technique s.The findings show that ceria modification improved Ni dispersion on γ-Al2 O3 catalyst support with highly active small Ni particles,which led to a remarkable catalytic performance with the total glycerol conversion(ca.99%),glycerol conversion into gaseous products(ca.77%) and H2 yield(ca.62%).The formation rate for H2 production(14.4 ×10^(-5)mol·s^-1·g^-1, TOF(H2)=3412 s^-1) was significantly improved with the Ni@12 Ce-Al2 O3 catalyst,representing nearly a 2-fold increase compared with that of the conventional Ni@AI2 O3 catalyst.In addition,the developed catalyst also exhibited comparatively high stability(for 12 h) and coke resistance ability.展开更多
The asymmetric carbenoid C–H insertion of 3-diazooxindoles into 1,4-cyclohexadiene has been accomplished in the presence of chiral bis(imidazoline) NCN pincer iridium(Ⅲ) complexes as the catalysts. With a catalyst l...The asymmetric carbenoid C–H insertion of 3-diazooxindoles into 1,4-cyclohexadiene has been accomplished in the presence of chiral bis(imidazoline) NCN pincer iridium(Ⅲ) complexes as the catalysts. With a catalyst loading of 0.5 mol%, the reactions proceeded smoothly at 0℃ to afford a variety of chiral 3-substituted oxindoles in good yields with moderate to excellent enantioselectivities(up to 99% ee). The protocol exhibits good functional group tolerance with respect to 3-diazooxindoles and is readily scaled up to 2 mmol scale without any loss in activity and enantioselectivity. Density functional theory(DFT)calculations have been performed to better understand the reaction mechanism and to explain the stereochemical outcome of the reactions.展开更多
A simple and efficient solvent-free method was developed for the acetylation of alcohols, phenols and amines in excellent yields employing glycerol-based sulfonic acid (-SO3H) functionalized carbon catalyst under envi...A simple and efficient solvent-free method was developed for the acetylation of alcohols, phenols and amines in excellent yields employing glycerol-based sulfonic acid (-SO3H) functionalized carbon catalyst under environmentally benign reaction conditions. The salient features of this protocol are the short reaction time, ease of product isolation and reusability of the carbon catalyst.展开更多
A mild, simple and efficient procedure for the preparation of 3,4-dihydropyrimidin-2（1H）-ones and -thiones is described using N-sulfonic acid poly（4-vinylpyridinium） chloride （NSPVPC） as a heterogeneous and effi...A mild, simple and efficient procedure for the preparation of 3,4-dihydropyrimidin-2（1H）-ones and -thiones is described using N-sulfonic acid poly（4-vinylpyridinium） chloride （NSPVPC） as a heterogeneous and efficient catalyst under solvent-free conditions. Simple methodologies, easy work-up procedure, easy preparation of the catalyst, excellent yields and very short reaction times are among the other advantages of this work. Further, the catalyst can be reused and recovered for several times without significant decrease in its activity.展开更多
基金supported by National Natural Science Founda:tion of China(22461002,22308061,22305046)Natural Science Foundation(NSF)of Jiangxi Province(20224BAB213011,20242BAB20110,20224BAB213012)+1 种基金High-Level and Highly Demanded Overseas Talent Programs of Jiangxi Province(20232BCJ25050)Gannan Normal University Start-up Fund(BSJJ202109).
文摘1-Isoquinolin-1(2H)-one skeleton exists widely in natural products,pharmaceuticals and materials.We disclose here a fluorine effect and catalyst cooperatively induced regioselective or regiospecific 3,4-functionalization of unsymmetric 2-CF_(3)-1,3-enynes.The presence of trifluoromethyl group is determinable for the regioselectivity.When the CF_(3) group was replaced with the methyl or amide group,the regioselectivity decreased to a ratio of 1.3:1 or 1:1.7,respectively.For alkyl substitutedβ-CF_(3)-1,3-enynes,a regiospecificity was obtained.This strategy features excellent regioselectivity,broad substrate scope and high functional group tolerance.Mechanistic studies showed that C–H bond activation is the rate-limiting step.
文摘A series of 2,3-dihydroquinazolin-4（1H）-ones have been synthesized in good to excellent yields through direct cyclocondensation of anthranilamide and aryl aldehydes or ketones in water or methanol under mild conditions.The reaction was efficiently promoted by 10 mol%sulfamic acid（SA,H_2NSO_3H） and the catalyst could be recovered easily after the reactions and reused without evident loss of reactivity.
基金The National Key Project for Basic Research of China(973 Project)(No.2005CB221402)China National Petroleum Corporation
文摘The activation of adsorbed CO is an important step in CO hydrogenation. The results from TPSR of pre-adsorbed CO with H2 and syngas suggested that the presence of H2 increased the amount of CO adsorption and accelerated CO dissociation. The H2 was adsorbed first, and activated to form H＊ over metal sites, then reacted with carbonaceous species. The oxygen species for CO2 formation in the presence of hydrogen was mostly OH^＊, which reacted with adsorbed CO subsequently via CO^＊＋OH^＊ → CO2^＊＋H^＊; however, the direct CO dissociation was not excluded in CO hydrogenation. The dissociation of C-O bond in the presence of H2 proceeded by a concerted mechanism, which assisted the Boudourd reaction of adsorbed CO on the surface via CO^＊＋2H^＊ → CH^＊＋OH^＊. The formation of the surface species （CH） from adsorbed CO proceeded as indicated with the participation of surface hydrogen, was favored in the initial step of the Fischer-Tropsch synthesis.
基金the National Natural Science Foundation of China (51676090)the Natural Science Foundation of Jiangsu Province (BK20150513), and the Six Talent Peaks Project in Jiangsu Province.
文摘In this investigation, Pt–Ba–Ce/c-Al2O3 catalysts were prepared by incipient wetness impregnation and experiments were performed to evaluate the influence of H2 on the evolution mechanism of nitrogen oxides (NOx) storage and reduction (NSR). The physical and chemical properties of the Pt–Ba–Ce/c- Al2O3 catalysts were studied using a combination of characterization techniques, which showed that PtOx, CeO2, and BaCO3, whose peaks were observed in X-ray diffraction (XRD) spectra, dispersed well on the c-Al2O3, as shown by transmission electron microscope (TEM), and that the difference between Ce3+ and Ce4+, as detected by X-ray photoelectron spectroscopy (XPS), facilitated the migration of active oxygen over the catalyst. In the process of a complete NSR experiment, the NOx storage capability was greatly enhanced in the temperature range of 250–350℃, and reached a maximum value of 315.3μmol·gcat^-1 at 350℃, which was ascribed to the increase in NO2 yield. In a lean and rich cycling experiment, the results showed that NOx storage efficiency and conversion were increased when the time of H2 exposure (i.e., 30, 45, and 60 s) was extended. The maximum NOx conversion of the catalyst reached 83.5% when the duration of the lean and rich phases was 240 and 60 s, respectively. The results revealed that increasing the content of H2 by an appropriate amount was favorable to the NSR mechanism due to increased decomposition of nitrate or nitrite, and the refreshing of trapping sites for the next cycle of NSR.
基金Funded by the National Natural Science Foundation of China(No.21476177)。
文摘A series of heteropoly acid (HPA) based Al2O3 catalysts with three-dimensional ordered (3DOM) structure were synthesized by colloidal crystal template method.Interconnected macropores (250 nm) could be clearly observed by scanning electron microscope (SEM) and transmission electron microscope (TEM).Mesopores could be detected by N2 adsorption-desorption isotherms which further confirmed the 3DOM structural characteristics of catalyst.Moreover,Keggin-type HPW was highly dispersed in the Al2O3 framework,which suggested by powder X-ray diffraction (XRD) and Fourier transform infrared spectra (FT-IR) results.The oxidation desulfurization (ODS) performance of 3DOM H3PW12O40/Al2O3 of refractory sulphur compounds was evaluated in the presence of hydrogen peroxide.It oxidized 98.5% of dibenzothiophene (DBT) into corresponding sulfone within 3 h,which exhibited superior ODS performance than corresponding mesoporous and microporous H3PW12O40/Al2O3 catalyst.The enhancement of ODS efficiency is related to the improvement of mass transfer of DBT in the pore channel resulting from the interconnected 3DOM structure.Furthermore,the as-prepared catalyst still demonstrates outstanding cycle performance after 6 runs,which could be easily recovered from the model fuel.
基金The National Basic Research Program of China (973 Program) (No. 2005CB221402)China National Petroleum Corporation
文摘The purpose of this study was to investigate the effect of preadsorbed CO at different temperatures, calcination temperatures, the combined influence of reduction temperature and time, and pretreatment using hydrogen or syngas as reduction agents on the F-T synthesis （FTS） activity and selectivity of Co/Al2O3 catalyst. The reactivity of the carbon species at higher preadsorption temperature with H2 in TPSR decreased, whereas the carbon-containing species showed higher reactivity over Co/Al2O3 catalyst with low calcination temperature. This agreed well with the order of catalytic activity for F-T synthesis on this catalyst. The catalytic activity of the catalyst varied with reduction temperature and time remarkably. CODEX optimization gave an optimum reduction temperature of 756 K and reduction time of 6.2 h and estimated C5＋ yield perfectly. The pretreatment of Co/Al2O3 catalyst with different reduction agents （hydrogen or syngas） showed important influences on the catalytic performance. A high CO conversion and C5＋ yield were obtained on the catalyst reduced by hydrogen, whereas methane selectivity on the catalyst reduced by syngas was much higher than that on the catalyst reduced by hydrogen.
基金the National Natural Science Foundation of China(No.20303019)the National 973 Project of China(No.2003CB615802).
文摘A series of 3.0Mo/(Hβ+γ-Al_(2)O_(3))samples withγ-Al_(2)O_(3)contents in the range of 0_100%(mass fraction)was studied by means of XRD,NH_(3)-TPD,TPR and BET determinations for characterizing their structures.The Hβzeolite structure in the 3.0Mo/Hβsample can be effectively stabilized by adding someγ-Al_(2)O_(3)to Hβzeolite.γ-Al_(2)O_(3)mainly favors the formation of polymolybdate or multilayered Mo oxide,while Hβmainly forms the Al_(2)(MoO_(4))_(3)species,as evaluated by the TPR technique.When used as the catalyst for the metathesis of butylene-2 and ethylene to propylene,there exists a close correlation between the specific surface area and stability of the catalyst.The specific surface area of the catalyst shows the maximum when{(Hβ+}γ-Al_(2)O_(3))contains 30%γ-Al_(2)O_(3),which is in agreement with that of the time needed for the reaction stablization.In the case of maximum surface area,the rate of coke deposition is the minimum.
基金funding from European Union's Horizon 2020 research and innovation programme under grant agreement No.872102financial support by the Petroleum Technology Development Fund(PTDF),Nigeria(PTDF/ED/OSS/PHD/IA/1209/17)+2 种基金financial support from the European Commission Marie Sklodowska-Curie Individual Fellowship(H2020-MSCAIF-NTPleasure-748196)the Chinese Scholarship Council(CSC)for her academic visiting fellowship at the University of Manchester(No.201708440477)the Foundation of Department of Education of Guangdong Province(Nos.2017KZDXM085,2018KZDXM070)。
文摘Excess crude glycerol derived as a by-product from biodiesel industry prompts the need to valorise glycerol to value-added chemicals.In this context,catalytic steam reforming of glycerol(SRG) was proposed as a promising and sustainable alternative for producing renewable hydrogen(H2).Herein,the development of nickel(Ni) supported on ceria-modified mesoporous γ-alumina(γ-Al2 O3) catalysts and their applications in catalytic SRG(at550-750℃ atmospheric pressure and weight hourly space velocity,WHSV,of 44,122 ml·g^-1·h^-1(STP)) is presented.Properties of the developed catalysts were characterised using many technique s.The findings show that ceria modification improved Ni dispersion on γ-Al2 O3 catalyst support with highly active small Ni particles,which led to a remarkable catalytic performance with the total glycerol conversion(ca.99%),glycerol conversion into gaseous products(ca.77%) and H2 yield(ca.62%).The formation rate for H2 production(14.4 ×10^(-5)mol·s^-1·g^-1, TOF(H2)=3412 s^-1) was significantly improved with the Ni@12 Ce-Al2 O3 catalyst,representing nearly a 2-fold increase compared with that of the conventional Ni@AI2 O3 catalyst.In addition,the developed catalyst also exhibited comparatively high stability(for 12 h) and coke resistance ability.
基金supported by a grant from the National Nat-ural Science Foundation of China(No.21472176).
文摘The asymmetric carbenoid C–H insertion of 3-diazooxindoles into 1,4-cyclohexadiene has been accomplished in the presence of chiral bis(imidazoline) NCN pincer iridium(Ⅲ) complexes as the catalysts. With a catalyst loading of 0.5 mol%, the reactions proceeded smoothly at 0℃ to afford a variety of chiral 3-substituted oxindoles in good yields with moderate to excellent enantioselectivities(up to 99% ee). The protocol exhibits good functional group tolerance with respect to 3-diazooxindoles and is readily scaled up to 2 mmol scale without any loss in activity and enantioselectivity. Density functional theory(DFT)calculations have been performed to better understand the reaction mechanism and to explain the stereochemical outcome of the reactions.
文摘A simple and efficient solvent-free method was developed for the acetylation of alcohols, phenols and amines in excellent yields employing glycerol-based sulfonic acid (-SO3H) functionalized carbon catalyst under environmentally benign reaction conditions. The salient features of this protocol are the short reaction time, ease of product isolation and reusability of the carbon catalyst.
基金the University of Guilan Research Council for the partial support of this work
文摘A mild, simple and efficient procedure for the preparation of 3,4-dihydropyrimidin-2（1H）-ones and -thiones is described using N-sulfonic acid poly（4-vinylpyridinium） chloride （NSPVPC） as a heterogeneous and efficient catalyst under solvent-free conditions. Simple methodologies, easy work-up procedure, easy preparation of the catalyst, excellent yields and very short reaction times are among the other advantages of this work. Further, the catalyst can be reused and recovered for several times without significant decrease in its activity.
