The effect of pretreatment on Pd/Al2O3 catalysts for the catalytic oxidation of o-xylene at low temperature was studied by changing the pretreatment and testing conditions. The fresh and pretreated Pd/Al2O3 catalysts ...The effect of pretreatment on Pd/Al2O3 catalysts for the catalytic oxidation of o-xylene at low temperature was studied by changing the pretreatment and testing conditions. The fresh and pretreated Pd/Al2O3 catalysts were characterized by transmission electron microscopy （TEM）, X-ray photoelectron spectroscopy （XPS） and X-ray diffraction （XRD）. The results showed that the pretreatment dramatically changed the Pd/PdO ratio and then significantly affected the Pd/Al2O3 activity; while the pretreatment had not much influence on Pd particle size. The Pd/Al2O3 pre-reduced at 300~C/400~C, which has fully reduced Pd species, showed the highest activity; while the fresh Pd/Al2O3, which has fully oxidized Pd species, presented the worst performance, indicating the Pd chemical state plays an important role in the catalytic activity for the o-xylene oxidation. It is concluded that metallic Pd is the active species on the Pd/Al2O3 catalyst for the catalytic oxidation of o-xylene at low temperature.展开更多
Nanoscale Pd/Fe bimetallic particles were synthesized with an efficient method to dechlorinate o-chlorophenol. The nanoscale Pd/Fe particles were determined by transmission electron microscopy and BET specific surface...Nanoscale Pd/Fe bimetallic particles were synthesized with an efficient method to dechlorinate o-chlorophenol. The nanoscale Pd/Fe particles were determined by transmission electron microscopy and BET specific surface area analysis. Most of the particles are in the size range of 20—100 nm. The BET specific surface area of synthesized nanoscale Pd/Fe particles is 12.4 m 2/g. In contrast, a commercially available fine iron powder(<100 mesh) has a specific surface area of 0.49 m 2/g. Batch studies demonstrated that the nanoscale particles can effectively dechlorinate o-chlorophenol. The dechlorination reaction takes place on the surface of synthesized nanoscale Pd/Fe bimetallic particles in a pseudo-first order reaction. The surface-area-normalized rate coefficients(k_ SA) are comparable to those reported in the literature for chlorinated ethenes. The observed reaction rate constants(k_ obs) are dominated by the mass fraction of Pd and the mass concentration of the nanoscale Pd/Fe particles.展开更多
Ce-Zr-Al-Nd2O3 （CZAN） support materials were prepared by co-precipitation and impregnation methods, respectively. They were characterized by X-ray diffTaction （XRD）, low temperature nitrogen adsorption-desorption,...Ce-Zr-Al-Nd2O3 （CZAN） support materials were prepared by co-precipitation and impregnation methods, respectively. They were characterized by X-ray diffTaction （XRD）, low temperature nitrogen adsorption-desorption, oxygen pulsing technique, H2-temperamre programmed reduction （H2-TPR） and X-ray photoelectron spectroscopy （XPS）. The Pd-only three-way catalysts （Pd-TWC） supported on these materials were prepared by incipient wetness method and studied by activity tests. The results demonstrated that the CZAN supports obtained by the two methods showed better structural, textural and redox properties than the CZA without Nd2O3, and the addition of Nd203 improved the catalytic activity of TWC. Especially, the CZAN-i support prepared by impregnation method had better thermal stability and redox property. Meanwhile, the Pd/CZAN-i catalyst exhibited the best catalytic performance. XPS measurements indicated that the Nd-modified samples possessed more Ce3＋ and oxygen vacancies on the surface of samples, which led to a better redox property. The excellent redox property of support materials helped to improve the catalytic activity of TWC.展开更多
Transformation of chlorophenols by nanoscale bimetallic particles represents one of the latest innovative technologies for environmental remediation. Nanoscale Pd/Fe bimetallic particles were synthesized in the labora...Transformation of chlorophenols by nanoscale bimetallic particles represents one of the latest innovative technologies for environmental remediation. Nanoscale Pd/Fe bimetallic particles were synthesized in the laboratory for treatment of o-chlorophenol. Most of the nanoscale particles are in the size range of 20—100 nm. BET specific surface area of the nanoscale Pd/Fe particles is 12.4 m2/g. In comparison, a commercially available Fe powder(<100 mesh) has a specific surface area of just 0\^49 m2/g. Batch experiments demonstrated that the nanoscale Pd/Fe bimetallic particles can effectively dechlorinate o-chlorophenol. Dechlorination efficiency is affected by the mass fraction of Pd in the bimetal, nanoscale Pd/Fe mass concentration and mixing intensity.展开更多
o-Dichlorobenzene (o-DCB) was dechlorinated by Pd/Fe powder in water throughcatalytic reduction. The dechlorination reaction is believed to take place on the surface site ofthe catalyst via a pseuclo-first-order react...o-Dichlorobenzene (o-DCB) was dechlorinated by Pd/Fe powder in water throughcatalytic reduction. The dechlorination reaction is believed to take place on the surface site ofthe catalyst via a pseuclo-first-order reaction. The final reduction product of o-DCB is benzene.The dechlorination rate increases with the increase of bulk loading of palladium due to the increaseof both the surface loading of palladium and the total surface area. Dechlorination efficiencyaccounts for 90% at Pd/Fe mass ratio 0.02% and metal to solution ratio about 53.3g · L^(-1) in 120minutes. Dechlorination is affected by the reaction temperature, pH, Pd/Fe ratio and the addition ofPd/Fe. E_a is found to be 102.5 kJ · mol^(-1) in the temperature range of 287—313 K.展开更多
A stable organometallic Pd (Ⅱ) compound Pd(ptac-C,N)(acac-O,O) (Hacac = acetyl acetone, Hptac = 3-(2-pyridinethioxy)-acac, formula: C15H17NO4SPd, Mr = 413.76) 1 has been synthesized and its crystal structure was dete...A stable organometallic Pd (Ⅱ) compound Pd(ptac-C,N)(acac-O,O) (Hacac = acetyl acetone, Hptac = 3-(2-pyridinethioxy)-acac, formula: C15H17NO4SPd, Mr = 413.76) 1 has been synthesized and its crystal structure was determined by X-ray crystallography. The crystal is of monoclinic with space group C2/c, a = 17.9342(3), b = 17.7791(4), c = 13.1800(1) ? b = 128.400(1), V = 3293.5(1) 3, Z = 8, Dc = 1.669 g/cm3, F(000) = 1664, m = 1.269 mm-1, R = 0.0261 and wR = 0.0710 for 2653 observed reflections (I > 2s(I)). There exist two Pd rings in the title compound, C(14)O(4)PdO(3)C(12)C(13) and C(1)NPdC(8)S, with the palladium atom taking a square-planar coordination. Two oxygen atoms from the acetyl acetone ligand (PdO, 1.991(2) and 2.036(2) ), one N atom (PdN 2.019 ? and the g-carbon atom (PdC 2.067(3) ? from the ptac ligand are coordinated to Pd.展开更多
本研究旨在建立辛芍组方中灯盏甲素的PK-PD结合模型。首先采用液质联用法测定大鼠脑缺血再灌注损伤模型给药后的不同时间点所得血浆样本中灯盏甲素的药物浓度,获得药时曲线;同时采用试剂盒测定不同时间点所得血浆样本中的两种药效指标(...本研究旨在建立辛芍组方中灯盏甲素的PK-PD结合模型。首先采用液质联用法测定大鼠脑缺血再灌注损伤模型给药后的不同时间点所得血浆样本中灯盏甲素的药物浓度,获得药时曲线;同时采用试剂盒测定不同时间点所得血浆样本中的两种药效指标(SOD和LDH),获得时效曲线。然后用Win Non Lin软件采用房室模型的分析方法对灯盏甲素的药代动力学参数进行拟合,获得PK参数。在此基础之上,固定相关的药代动力学参数,对时效关系进行拟合,得到相关的PD参数,根据PD参数,建立辛芍组方中灯盏甲素的PK-PD结合模型。当以SOD为药效指标时,可得辛芍组方中灯盏甲素的PK-PD模型为E=20.67+(1.22×Ce)/(Ce+5.58);当以LDH为药效指标时,可得辛芍组方中代表成分灯盏甲素的PK-PD模型为E=214.17-(32.72×Ce)/(Ce+0.08)。结果表明,SOD和LDH的浓度与灯盏甲素的浓度存在一定的相关性。辛芍组方及其主要活性成分灯盏甲素可通过提高SOD、降低LDH发挥抗氧化作用来实现保护脑缺血再灌注损伤。展开更多
基金supported by the Ministry of Science and Technology of China (No. 2012AA062702,2010AA64905)the National Natural Science Foundation of China (No. 21077117)
文摘The effect of pretreatment on Pd/Al2O3 catalysts for the catalytic oxidation of o-xylene at low temperature was studied by changing the pretreatment and testing conditions. The fresh and pretreated Pd/Al2O3 catalysts were characterized by transmission electron microscopy （TEM）, X-ray photoelectron spectroscopy （XPS） and X-ray diffraction （XRD）. The results showed that the pretreatment dramatically changed the Pd/PdO ratio and then significantly affected the Pd/Al2O3 activity; while the pretreatment had not much influence on Pd particle size. The Pd/Al2O3 pre-reduced at 300~C/400~C, which has fully reduced Pd species, showed the highest activity; while the fresh Pd/Al2O3, which has fully oxidized Pd species, presented the worst performance, indicating the Pd chemical state plays an important role in the catalytic activity for the o-xylene oxidation. It is concluded that metallic Pd is the active species on the Pd/Al2O3 catalyst for the catalytic oxidation of o-xylene at low temperature.
文摘Nanoscale Pd/Fe bimetallic particles were synthesized with an efficient method to dechlorinate o-chlorophenol. The nanoscale Pd/Fe particles were determined by transmission electron microscopy and BET specific surface area analysis. Most of the particles are in the size range of 20—100 nm. The BET specific surface area of synthesized nanoscale Pd/Fe particles is 12.4 m 2/g. In contrast, a commercially available fine iron powder(<100 mesh) has a specific surface area of 0.49 m 2/g. Batch studies demonstrated that the nanoscale particles can effectively dechlorinate o-chlorophenol. The dechlorination reaction takes place on the surface of synthesized nanoscale Pd/Fe bimetallic particles in a pseudo-first order reaction. The surface-area-normalized rate coefficients(k_ SA) are comparable to those reported in the literature for chlorinated ethenes. The observed reaction rate constants(k_ obs) are dominated by the mass fraction of Pd and the mass concentration of the nanoscale Pd/Fe particles.
基金Project supported by National Natural Science Foundation of China (20773090, 20803049)the Specialized Research Fund for the Doctoral Program of Higher Education (20070610026, 200806100009)
文摘Ce-Zr-Al-Nd2O3 （CZAN） support materials were prepared by co-precipitation and impregnation methods, respectively. They were characterized by X-ray diffTaction （XRD）, low temperature nitrogen adsorption-desorption, oxygen pulsing technique, H2-temperamre programmed reduction （H2-TPR） and X-ray photoelectron spectroscopy （XPS）. The Pd-only three-way catalysts （Pd-TWC） supported on these materials were prepared by incipient wetness method and studied by activity tests. The results demonstrated that the CZAN supports obtained by the two methods showed better structural, textural and redox properties than the CZA without Nd2O3, and the addition of Nd203 improved the catalytic activity of TWC. Especially, the CZAN-i support prepared by impregnation method had better thermal stability and redox property. Meanwhile, the Pd/CZAN-i catalyst exhibited the best catalytic performance. XPS measurements indicated that the Nd-modified samples possessed more Ce3＋ and oxygen vacancies on the surface of samples, which led to a better redox property. The excellent redox property of support materials helped to improve the catalytic activity of TWC.
文摘Transformation of chlorophenols by nanoscale bimetallic particles represents one of the latest innovative technologies for environmental remediation. Nanoscale Pd/Fe bimetallic particles were synthesized in the laboratory for treatment of o-chlorophenol. Most of the nanoscale particles are in the size range of 20—100 nm. BET specific surface area of the nanoscale Pd/Fe particles is 12.4 m2/g. In comparison, a commercially available Fe powder(<100 mesh) has a specific surface area of just 0\^49 m2/g. Batch experiments demonstrated that the nanoscale Pd/Fe bimetallic particles can effectively dechlorinate o-chlorophenol. Dechlorination efficiency is affected by the mass fraction of Pd in the bimetal, nanoscale Pd/Fe mass concentration and mixing intensity.
基金the Returnee Foundation of Ministry of Education of China (No. 2002-247)Science and Technology Project of Zhejiang Province (No. 2004C34006).
文摘o-Dichlorobenzene (o-DCB) was dechlorinated by Pd/Fe powder in water throughcatalytic reduction. The dechlorination reaction is believed to take place on the surface site ofthe catalyst via a pseuclo-first-order reaction. The final reduction product of o-DCB is benzene.The dechlorination rate increases with the increase of bulk loading of palladium due to the increaseof both the surface loading of palladium and the total surface area. Dechlorination efficiencyaccounts for 90% at Pd/Fe mass ratio 0.02% and metal to solution ratio about 53.3g · L^(-1) in 120minutes. Dechlorination is affected by the reaction temperature, pH, Pd/Fe ratio and the addition ofPd/Fe. E_a is found to be 102.5 kJ · mol^(-1) in the temperature range of 287—313 K.
基金the State Key Basic Research and Development Plan of China (001CB108906), the NNSF of China (No. 29733090 and No. 20173063), Key Project in KIP of CAS (KJCX2-H3) and the NSF of Fujian province (E0020001)
文摘A stable organometallic Pd (Ⅱ) compound Pd(ptac-C,N)(acac-O,O) (Hacac = acetyl acetone, Hptac = 3-(2-pyridinethioxy)-acac, formula: C15H17NO4SPd, Mr = 413.76) 1 has been synthesized and its crystal structure was determined by X-ray crystallography. The crystal is of monoclinic with space group C2/c, a = 17.9342(3), b = 17.7791(4), c = 13.1800(1) ? b = 128.400(1), V = 3293.5(1) 3, Z = 8, Dc = 1.669 g/cm3, F(000) = 1664, m = 1.269 mm-1, R = 0.0261 and wR = 0.0710 for 2653 observed reflections (I > 2s(I)). There exist two Pd rings in the title compound, C(14)O(4)PdO(3)C(12)C(13) and C(1)NPdC(8)S, with the palladium atom taking a square-planar coordination. Two oxygen atoms from the acetyl acetone ligand (PdO, 1.991(2) and 2.036(2) ), one N atom (PdN 2.019 ? and the g-carbon atom (PdC 2.067(3) ? from the ptac ligand are coordinated to Pd.
文摘本研究旨在建立辛芍组方中灯盏甲素的PK-PD结合模型。首先采用液质联用法测定大鼠脑缺血再灌注损伤模型给药后的不同时间点所得血浆样本中灯盏甲素的药物浓度,获得药时曲线;同时采用试剂盒测定不同时间点所得血浆样本中的两种药效指标(SOD和LDH),获得时效曲线。然后用Win Non Lin软件采用房室模型的分析方法对灯盏甲素的药代动力学参数进行拟合,获得PK参数。在此基础之上,固定相关的药代动力学参数,对时效关系进行拟合,得到相关的PD参数,根据PD参数,建立辛芍组方中灯盏甲素的PK-PD结合模型。当以SOD为药效指标时,可得辛芍组方中灯盏甲素的PK-PD模型为E=20.67+(1.22×Ce)/(Ce+5.58);当以LDH为药效指标时,可得辛芍组方中代表成分灯盏甲素的PK-PD模型为E=214.17-(32.72×Ce)/(Ce+0.08)。结果表明,SOD和LDH的浓度与灯盏甲素的浓度存在一定的相关性。辛芍组方及其主要活性成分灯盏甲素可通过提高SOD、降低LDH发挥抗氧化作用来实现保护脑缺血再灌注损伤。
