Systematic bias is a type of model error that can affect the accuracy of data assimilation and forecasting that must be addressed.An online bias correction scheme called the sequential bias correction scheme(SBCS),was...Systematic bias is a type of model error that can affect the accuracy of data assimilation and forecasting that must be addressed.An online bias correction scheme called the sequential bias correction scheme(SBCS),was developed using the6 h average bias to correct the systematic bias during model integration.The primary purpose of this study is to investigate the impact of the SBCS in the high-resolution China Meteorological Administration Meso-scale(CMA-MESO)numerical weather prediction(NWP)model to reduce the systematic bias and to improve the data assimilation and forecast results through this method.The SBCS is improved upon and applied to the CMA-MESO 3-km model in this study.Four-week sequential data assimilation and forecast experiments,driven by rapid update and cycling(RUC),were conducted for the period from 2–29 May 2022.In terms of the characteristics of systematic bias,both the background and analysis show diurnal bias,and these large biases are affected by complex underlying surfaces(e.g.,oceans,coasts,and mountains).After the application of the SBCS,the results of the data assimilation show that the SBCS can reduce the systematic bias of the background and yield a neutral to slightly positive result for the analysis fields.In addition,the SBCS can reduce forecast errors and improve forecast results,especially for surface variables.The above results indicate that this scheme has good prospects for high-resolution regional NWP models.展开更多
Model error is one of the key factors restricting the accuracy of numerical weather prediction （NWP）. Considering the continuous evolution of the atmosphere, the observed data （ignoring the measurement error） can ...Model error is one of the key factors restricting the accuracy of numerical weather prediction （NWP）. Considering the continuous evolution of the atmosphere, the observed data （ignoring the measurement error） can be viewed as a series of solutions of an accurate model governing the actual atmosphere. Model error is represented as an unknown term in the accurate model, thus NWP can be considered as an inverse problem to uncover the unknown error term. The inverse problem models can absorb long periods of observed data to generate model error correction procedures. They thus resolve the deficiency and faultiness of the NWP schemes employing only the initial-time data. In this study we construct two inverse problem models to estimate and extrapolate the time-varying and spatial-varying model errors in both the historical and forecast periods by using recent observations and analogue phenomena of the atmosphere. Numerical experiment on Burgers＇ equation has illustrated the substantial forecast improvement using inverse problem algorithms. The proposed inverse problem methods of suppressing NWP errors will be useful in future high accuracy applications of NWP.展开更多
Unmitigated tropospheric delay is one of the major error sources in precise point positioning(PPP).Precise Slant Tropospheric Delay(STD)estimation could help to provide cleaner observables for PPP,and improve its conv...Unmitigated tropospheric delay is one of the major error sources in precise point positioning(PPP).Precise Slant Tropospheric Delay(STD)estimation could help to provide cleaner observables for PPP,and improve its convergence,accuracy,and stability.STD is difficult to model accurately due to the rapid spatial and temporal variation of the water vapor in the troposphere.In the traditional approach,the STD is mapped from the zenith direction,which assumes a spherically symmetric local tropospheric profile and has limitations.In this paper,a new approach of directly estimating the STD from high resolution numerical weather modeling(NWM)products is introduced.This approach benefits from the best available meteorological information to improve real time STD estimation,with the RMS residual lower than 3.5 cm above 15°elevation,and 2 cm above 30°.Therefore,the new method can provide sufficient accuracy to improve PPP convergence time.To improve the performance of the new method in highly variable tropospheric conditions,a correction scheme is proposed which combines NWM information with multi-GNSS observations from a network of local continuously operating reference stations.It is demonstrated through a case study that this correction scheme is quite effective in reducing the STD estimation residuals and PPP convergence time.展开更多
Flash floods are a natural disaster that occurs annually, especially in the mountainous terrain and steep slopes of northern Thailand. The current flood forecasting systems and tools are available but have low accurac...Flash floods are a natural disaster that occurs annually, especially in the mountainous terrain and steep slopes of northern Thailand. The current flood forecasting systems and tools are available but have low accuracy and efficiency. The numbers of rainfall and runoff stations are less, because the access to the station area is difficult. Additionally, the operation and maintenance costs are high. Hydrological modeling of a SWAT （Soil and Water Assessment Tool） was used in this study with the application of three days weather forecast from the NWP （numerical weather prediction）, which provided temperature, relative humidity, rainfall, sunshine and wind speed. The data from NWP and SWAT were used to simulate the runoff from the Nan River in the last 10 years （2000-2010）. It was found that the simulated flow rate for the main streams using data from NWP were higher than the observations. At the N64 and Nl stations, the ratios of the maximum simulated flow rate to the observations were equal to 108% and 118%, respectively. However, for the tributaries, it was found that the simulated flow rate using NWP data was lower than the observations, but, it was still within the acceptable range of not greater than 20%,6. At N65, D090201 and D090203 stations, the ratio of the maximum simulated flow rate were 90.0%, 83.0% and 86.0%, respectively. This was due to the rainfall from the NWP model being greater than the measured rainfall. The NWP rainfall was distributed all over the area while the rainfall data from the measurements were obtained from specific points. Therefore, the rain from the NWP model is very useful especially for the watershed areas without rain gauge stations. In summary, the data from the NWP can be used with the SWAT model and provides relatively sound results despite the value for the main river being slightly higher than the observed data. Consequently, the output can be used to create a flood map for flash flood warning in the area.展开更多
This review summarizes the scientific and technical progress in atmospheric modeling in China since 2011,including the dynamical core,model physics,data assimilation,ensemble forecasting,and model evaluation strategie...This review summarizes the scientific and technical progress in atmospheric modeling in China since 2011,including the dynamical core,model physics,data assimilation,ensemble forecasting,and model evaluation strategies.In terms of the dynamical core,important efforts have been made in the improvement of the existing model formulations and in exploring new modeling approaches that can better adapt to massively parallel computers and global multiscale modeling.With regard to model physics,various achievements in physical representations have been made,especially a trend toward scale-aware parameterization for accommodating the increase of model resolution.In the field of data assimilation,a 4D-Var system has been developed and is operationally used by the National Meteorological Center of China,and its performance is promising.Furthermore,ensemble forecasting has played a more important role in operational forecast systems and progressed in many fundamental techniques.Model evaluation strategies,including key performance metrics and standardized experimental protocols,have been proposed and widely applied to better understand the strengths and weaknesses of the systems,offering key routes for model improvement.The paper concludes with a concise summary of the status quo and a brief outlook in terms of future development.展开更多
The uncertainties caused by the errors of the initial states and the parameters in the numerical model are investigated. Three problems of predictability in numerical weather and climate prediction are proposed, which...The uncertainties caused by the errors of the initial states and the parameters in the numerical model are investigated. Three problems of predictability in numerical weather and climate prediction are proposed, which are related to the maximum predictable time, the maximum prediction error, and the maximum admissible errors of the initial values and the parameters in the model respectively. The three problems are then formulated into nonlinear optimization problems. Effective approaches to deal with these nonlinear optimization problems are provided. The Lorenz’ model is employed to demonstrate how to use these ideas in dealing with these three problems.展开更多
In this paper, an analogue correction method of errors （ACE） based on a complicated atmospheric model is further developed and applied to numerical weather prediction （NWP）. The analysis shows that the ACE can eff...In this paper, an analogue correction method of errors （ACE） based on a complicated atmospheric model is further developed and applied to numerical weather prediction （NWP）. The analysis shows that the ACE can effectively reduce model errors by combining the statistical analogue method with the dynamical model together in order that the information of plenty of historical data is utilized in the current complicated NWP model, Furthermore, in the ACE, the differences of the similarities between different historical analogues and the current initial state are considered as the weights for estimating model errors. The results of daily, decad and monthly prediction experiments on a complicated T63 atmospheric model show that the performance of the ACE by correcting model errors based on the estimation of the errors of 4 historical analogue predictions is not only better than that of the scheme of only introducing the correction of the errors of every single analogue prediction, but is also better than that of the T63 model.展开更多
The initial value error and the imperfect numerical model are usually considered as error sources of numerical weather prediction （NWP）. By using past multi-time observations and model output, this study proposes a ...The initial value error and the imperfect numerical model are usually considered as error sources of numerical weather prediction （NWP）. By using past multi-time observations and model output, this study proposes a method to estimate imperfect numerical model error. This method can be inversely estimated through expressing the model error as a Lagrange interpolation polynomial, while the coefficients of polyno- mial are determined by past model performance. However, for practical application in the full NWP model, it is necessary to determine the following criteria： （1） the length of past data sufficient for estimation of the model errors, （2） a proper method of estimating the term ＂model integration with the exact solution＂ when solving the inverse problem, and （3） the extent to which this scheme is sensitive to the observational errors. In this study, such issues are resolved using a simple linear model, and an advection diffusion model is applied to discuss the sensitivity of the method to an artificial error source. The results indicate that the forecast errors can be largely reduced using the proposed method if the proper length of past data is chosen. To address the three problems, it is determined that （1） a few data limited by the order of the corrector can be used, （2） trapezoidal approximation can be employed to estimate the ＂term＂ in this study; however, a more accurate method should be explored for an operational NWP model, and （3） the correction is sensitive to observational error.展开更多
We used a Lake Shira numerical model to estimate the response of the ecosystem of a saline meromictic lake to variations in weather parameters during the growing season. The sensitivity analysis of the model suggests ...We used a Lake Shira numerical model to estimate the response of the ecosystem of a saline meromictic lake to variations in weather parameters during the growing season. The sensitivity analysis of the model suggests that compared to other external(nutrient inflows) and internal(spring biomasses of food-web components) factors, weather parameters are among the most influential for both mixolimnetic(phyto-and zooplankton) and monimolimnetic(purple sulfur bacteria, sulfur reducing bacteria and hydrogen sulfide) food-web components. Calculations with different weather scenarios shows how changes in the water temperature and mixing depth af fect mixolimnetic and monimolimnetic food-web components and the depth of the oxic-anoxic interface in a meromictic lake. When weather forcing stimulates an increase in the biomass of food-web components in the mixolimnion, it produces cascading effects that lead to three results: 1) a higher content of detritus in the water column; 2) a higher content of hydrogen sulfide in the monimolimnion; 3) raising of the oxic-anoxic interface closer to the water-air surface. This cascading effect is complicated by the negative correlation between two light dependent primary producers located at diff erent depths—phytoplankton in the mixolimnion and purple sulfur bacteria at the oxic-anoxic interface. Thus, weather conditions that stimulate higher phytoplankton biomass are associated with a higher detritus content and lower biomass of purple sulfur bacteria, a higher content of hydrogen sulfide and a shallower oxic-anoxic interface. The same weather conditions(higher wind, lower cloud cover, and lower air temperature) promote a scenario of less stable thermal stratification. Thus, our calculations suggest that weather parameters during the summer season strongly control the mixing depth, water temperature and the mixolimnetic food web. An effect of biogeochemical and physical interactions on the depth of the oxicanoxic interface is also detectable. However, intra-and interannual climate and weather effects will be more important for the control of meromixis stability.展开更多
The cold wave weather process in Jiujiang in the early spring of February 2020 was analyzed.The results show that the establishment of blocking high near Lake Baikal and the rapid southward of cold air after accumulat...The cold wave weather process in Jiujiang in the early spring of February 2020 was analyzed.The results show that the establishment of blocking high near Lake Baikal and the rapid southward of cold air after accumulation resulted in the cold wave weather accompanied by strong cooling,hale and rain(snow)weather in Jiujiang.Before the cold wave broke out,the ground warmed up significantly,which was also one of thermal conditions for this cold wave weather.Water vapor conditions were abundant at middle and low levels;at 850 hPa,temperature dropped by 12-14℃during February 14-15,and-4℃isotherm appeared in the southern part of central Jiangxi,which is a favorable condition for rain(snow)in most areas of Jiujiang.展开更多
Numerical weather simulation data usually comprises various meteorological variables, such as precipitation, temperature and pressure. In practical applications, data generated with several different numerical simulat...Numerical weather simulation data usually comprises various meteorological variables, such as precipitation, temperature and pressure. In practical applications, data generated with several different numerical simulation models are usually used together by forecasters to generate the final forecast. However, it is difficult for forecasters to obtain a clear view of all the data due to its complexity. This has been a great limitation for domain experts to take advantage of all the data in their routine work. In order to help explore the multi-variate and multi-model data, we propose a stamp based exploration framework to assist domain experts in analyzing the data. The framework is used to assist domain experts in detecting the bias patterns between numerical simulation data and observation data. The exploration pipeline originates from a single meteorological variable and extends to multiple variables under the guidance of a designed stamp board. Regional data patterns can be detected by analyzing distinctive stamps on the board or generating extending stamps using the Boolean set operations. Experiment results show that some meteorological phenomena and regional data patterns can be easily detected through the exploration. These can help domain experts conduct the data analysis efficiently and further guide forecasters in producing reliable weather forecast.展开更多
In this paper, based on heavy rain numerical forecast model AREM(Advanced Regional Eta Model), two different initialization schemes, LAPS and GRAPES-3DVAR, are used to run assimilation experiments of AREM-LAPS and ARE...In this paper, based on heavy rain numerical forecast model AREM(Advanced Regional Eta Model), two different initialization schemes, LAPS and GRAPES-3DVAR, are used to run assimilation experiments of AREM-LAPS and AREM-3DVAR with the same data source(NCEP forecast field, surface data and radio-soundings) during the period from 21 May to 30 July 2008 to investigate the effect of the two initialization schemes on the rainfall simulation. The result suggests that:(1) the forecast TS score by the AREM-LAPS is higher than that by the AREM-3DVAR for rainfall in different areas, at different valid time and with different intensity, especially for the heavy rain, rainstorm and extremely heavy rain;(2) the AREM-3DVAR can generally simulate the average rainfall distribution, but the forecast area is smaller and rainfall intensity is weaker than the observation, while the AREM-LAPS significantly improves the forecast;(3) the AREM-LAPS gives a better forecast for the south-north shift of rainfall bands and the rainfall intensity variation than the AREM-3DVAR;(4) the AREM-LAPS can give a better reproduction for the daily change in the mean-rainfall-rate of the main rain band, and rainfall intensity changes in the eastern part of Southwest China, the coastal area in South China, the middle-lower valleys of Yangtze river, the Valleys of Huaihe river, and Shandong peninsula, with the rainfall intensity roughly close to the observation, while the rainfall intensity simulated by the AREM-3DVAR is clearly weaker than the observation, especially in the eastern part of Southwest China; and(5) the comparison verification between the AREM-LAPS and AREM-3DVAR for more than 10 typical rainfall processes in the summer of 2008 indicates that the AREM-LAPS gives a much better forecast than AREM-3DVAR in rain-band area, rainfall location and intensity, and in particular, the rainfall intensity forecast is improved obviously.展开更多
Precise high-temperature weather forecasts are essential, as heatwaves are increasing in frequency under the ongoing climate change. Land-surface schemes have been demonstrated to be crucial to numerical weather predi...Precise high-temperature weather forecasts are essential, as heatwaves are increasing in frequency under the ongoing climate change. Land-surface schemes have been demonstrated to be crucial to numerical weather predictions.However, few studies have explored the impact of land surface schemes on short-range high-temperature weather forecasts via operational numerical weather prediction models. To evaluate the impact of the soil thermal process on high-temperature weather forecasts, we coupled the soil thermal process of the state-of-the-art Common Land Model(CoLM) with the South China operational numerical weather prediction model(CMA-TRAMS) and compared the coupled model with the original CMA-TRAMS, which incorporated the Simplified Model for land Surface(SMS). Contrast experiments based on two versions of CMA-TRAMS were conducted for the year 2022 when persistent extreme heatwaves were observed in Central-East China. The results are as follows:(1) Short-range high-temperature weather forecasts were sensitive to soil thermal process schemes. The original CMA-TRAMS clearly underestimated the summertime near-surface air temperature(T2m) over almost all areas of China, whereas the CoLM led to a reduction of the negative biases by approximately 0.5°C.(2) The more accurate initial soil temperatures and the deeper soil structure used in the CoLM test contributed to actual predictions of soil heat flux, soil temperature, and T2m. Nevertheless, the SMS test failed to capture upward heat transport from deeper to shallower soil layers at night due to the shallow soil structure and lower accuracy of the bottom and initial soil temperatures.(3) Higher soil temperatures resulted in increased near-surface moisture and cloud cover in the CoLM test, which led to the warmer soil and further mitigated the cold biases of T2m through reduced longwave and shortwave radiation losses at the land surface.展开更多
A three-dimensional wind field analysis sollware based on the Beigng-Gucheng dual-Doppler weather radar system has been built, and evaluated by using the numerical cloud model producing storm flow and hydrometeor fiel...A three-dimensional wind field analysis sollware based on the Beigng-Gucheng dual-Doppler weather radar system has been built, and evaluated by using the numerical cloud model producing storm flow and hydrometeor fields. The effects of observation noise and the spatial distribution of wind field analysis error are also investigated.展开更多
The data of several rainfall products, including those estimated from satellite measurements and those forecasted via numerical weather modeling, for a severe debris-flow event in Zhouqu, Northwest China, are compared...The data of several rainfall products, including those estimated from satellite measurements and those forecasted via numerical weather modeling, for a severe debris-flow event in Zhouqu, Northwest China, are compared and analyzed in this paper. The satellite products, including CPC MORPHing technique（CMORPH）, TMPA-RT, and PERSIANN are all near-real-time retrieved with high temporal and spatial resolutions. The numerical weather model used in this paper for precipitation forecasting is WRF. The results show that all three satellite products can basically reproduce the rainfall pattern, distribution, timing, scale, and extreme values of the event, compared with gauge data. Their temporal and spatial correlation coefficients with gauge data are as high as about 0.6, which is statistically significant at 0.01 level. The performance of the forecasted results modeled with different spatial resolutions are not as good as the satellite-estimated results, although their correlation coefficients are still statistically significant at 0.05 level. From the total rainfall and extreme value time series for the domain, it is clear that, from the grid-to-grid perspective, the passive microwave-based CMORPH and TRMM products are more accurate than the infrared-based PERSIANN, while PERSIANN performs very well from the general point of view, especially when considering the whole domain or the whole convective precipitation system. The forecasted data — especially the highest resolution model domain data — are able to represent the total or mean precipitation very well in the research domain, while for extreme values the errors are large. This study suggests that satellite-retrieved and model-forecasted rainfall data are a useful complement to gauge data, especially for areas without gauge stations and areas not covered by weather radars.展开更多
This paper describes the procedure and methodology to formulate the convective weather potential （CWP） algorithm. The data used in the development of the algorithm are the radar echoes at 0.5° elevation from Gu...This paper describes the procedure and methodology to formulate the convective weather potential （CWP） algorithm. The data used in the development of the algorithm are the radar echoes at 0.5° elevation from Guangzhou Doppler Radar Station, surface observations from automatic weather stations （AWS） and outputs of numeric weather prediction （NWP） models. The procedure to develop the CWP algorithm consists of two steps： （1） identification of thunderstorm cells in accordance with specified statistical criteria; and （2） development of the algorithm based on multiple linear regression. The thunderstorm cells were automatically identified by radar echoes with intensity greater than or equal to 50 dB（Z） and of an area over 64 square kilometers. These cells are generally related to severe convective weather occurrences such as thunderstorm wind gusts, hail and tornados. In the development of the CWP algorithm, both echo- and environment-based predictors are used. The predictand is the probability of a thunderstorm cell to generate severe convective weather events. The predictor-predictand relationship is established through a stepwise multiple linear regression approach. Verification with an independent dataset shows that the CWP algorithm is skillful in detecting thunderstorm-related severe convective weather occurrences in the Pearl River Delta （PRD） region of South China. An example of a nowcasting case for a thunderstorm process is illustrated.展开更多
The correction of model forecast is an important step in evaluating weather forecast results.In recent years,post-processing models based on deep learning have become prominent.In this paper,a deep learning model name...The correction of model forecast is an important step in evaluating weather forecast results.In recent years,post-processing models based on deep learning have become prominent.In this paper,a deep learning model named EDConvLSTM based on encoder-decoder structure and ConvLSTM is developed,which appears to be able to effectively correct numerical weather forecasts.Compared with traditional post-processing methods and convolutional neural networks,ED-ConvLSTM has strong collaborative extraction ability to effectively extract the temporal and spatial features of numerical weather forecasts and fit the complex nonlinear relationship between forecast field and observation field.In this paper,the post-processing method of ED-ConvLSTM for 2 m temperature prediction is tested using The International Grand Global Ensemble dataset and ERA5-Land data from the European Centre for Medium-Range Weather Forecasts(ECMWF).Root mean square error and temperature prediction accuracy are used as evaluation indexes to compare ED-ConvLSTM with the method of model output statistics,convolutional neural network postprocessing methods,and the original prediction by the ECMWF.The results show that the correction effect of EDConvLSTM is better than that of the other two postprocessing methods in terms of the two indexes,especially in the long forecast time.展开更多
The UK Met Office Unified Model（UM） is employed by many weather forecasting agencies around the globe. This model is designed to run across spatial and time scales and known to produce skillful predictions for large...The UK Met Office Unified Model（UM） is employed by many weather forecasting agencies around the globe. This model is designed to run across spatial and time scales and known to produce skillful predictions for large-scale weather systems. However, the model has only recently begun running operationally at horizontal grid spacings of ～1.5 km [e.g.,at the UK Met Office and the Korea Meteorological Administration（KMA）]. As its microphysics scheme was originally designed and tuned for large-scale precipitation systems, we investigate the performance of UM microphysics to determine potential inherent biases or weaknesses. Two rainfall cases from the KMA forecasting system are considered in this study： a Changma（quasi-stationary） front, and Typhoon Sanba（2012）. The UM output is compared to polarimetric radar observations in terms of simulated polarimetric radar variables. Results show that the UM generally underpredicts median reflectivity in stratiform rain, producing high reflectivity cores and precipitation gaps between them. This is partially due to the diagnostic rain intercept parameter formulation used in the one-moment microphysics scheme. Model drop size is generally both underand overpredicted compared to observations. UM frozen hydrometeors favor generic ice（crystals and snow） rather than graupel, which is reasonable for Changma and typhoon cases. The model performed best with the typhoon case in terms of simulated precipitation coverage.展开更多
This paper introduces several alternative statistical approaches to modeling and prediction of electric energy generated by photovoltaic farms. The statistical models use outputs of a numerical weather prediction mode...This paper introduces several alternative statistical approaches to modeling and prediction of electric energy generated by photovoltaic farms. The statistical models use outputs of a numerical weather prediction model as their inputs. Presented statistical models allow for easy-to-compute predictions, both in temporal sense and for out-of-sample individual farms. Model performance is illustrated on a sample of real photovoltaic farms located in the Czech Republic.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.U2242213,U2142213,42305167,42175105)。
文摘Systematic bias is a type of model error that can affect the accuracy of data assimilation and forecasting that must be addressed.An online bias correction scheme called the sequential bias correction scheme(SBCS),was developed using the6 h average bias to correct the systematic bias during model integration.The primary purpose of this study is to investigate the impact of the SBCS in the high-resolution China Meteorological Administration Meso-scale(CMA-MESO)numerical weather prediction(NWP)model to reduce the systematic bias and to improve the data assimilation and forecast results through this method.The SBCS is improved upon and applied to the CMA-MESO 3-km model in this study.Four-week sequential data assimilation and forecast experiments,driven by rapid update and cycling(RUC),were conducted for the period from 2–29 May 2022.In terms of the characteristics of systematic bias,both the background and analysis show diurnal bias,and these large biases are affected by complex underlying surfaces(e.g.,oceans,coasts,and mountains).After the application of the SBCS,the results of the data assimilation show that the SBCS can reduce the systematic bias of the background and yield a neutral to slightly positive result for the analysis fields.In addition,the SBCS can reduce forecast errors and improve forecast results,especially for surface variables.The above results indicate that this scheme has good prospects for high-resolution regional NWP models.
基金Project supported by the Special Scientific Research Project for Public Interest(Grant No.GYHY201206009)the Fundamental Research Funds for the Central Universities,China(Grant Nos.lzujbky-2012-13 and lzujbky-2013-11)the National Basic Research Program of China(Grant Nos.2012CB955902 and 2013CB430204)
文摘Model error is one of the key factors restricting the accuracy of numerical weather prediction （NWP）. Considering the continuous evolution of the atmosphere, the observed data （ignoring the measurement error） can be viewed as a series of solutions of an accurate model governing the actual atmosphere. Model error is represented as an unknown term in the accurate model, thus NWP can be considered as an inverse problem to uncover the unknown error term. The inverse problem models can absorb long periods of observed data to generate model error correction procedures. They thus resolve the deficiency and faultiness of the NWP schemes employing only the initial-time data. In this study we construct two inverse problem models to estimate and extrapolate the time-varying and spatial-varying model errors in both the historical and forecast periods by using recent observations and analogue phenomena of the atmosphere. Numerical experiment on Burgers＇ equation has illustrated the substantial forecast improvement using inverse problem algorithms. The proposed inverse problem methods of suppressing NWP errors will be useful in future high accuracy applications of NWP.
基金This study is carried out as part of the project Innovative Navigation using new GNSS Signals with Hybridized Technologies(iNsight),which is funded by the UK Engineering and Physical Sciences Research Council(EPSRC).
文摘Unmitigated tropospheric delay is one of the major error sources in precise point positioning(PPP).Precise Slant Tropospheric Delay(STD)estimation could help to provide cleaner observables for PPP,and improve its convergence,accuracy,and stability.STD is difficult to model accurately due to the rapid spatial and temporal variation of the water vapor in the troposphere.In the traditional approach,the STD is mapped from the zenith direction,which assumes a spherically symmetric local tropospheric profile and has limitations.In this paper,a new approach of directly estimating the STD from high resolution numerical weather modeling(NWM)products is introduced.This approach benefits from the best available meteorological information to improve real time STD estimation,with the RMS residual lower than 3.5 cm above 15°elevation,and 2 cm above 30°.Therefore,the new method can provide sufficient accuracy to improve PPP convergence time.To improve the performance of the new method in highly variable tropospheric conditions,a correction scheme is proposed which combines NWM information with multi-GNSS observations from a network of local continuously operating reference stations.It is demonstrated through a case study that this correction scheme is quite effective in reducing the STD estimation residuals and PPP convergence time.
文摘Flash floods are a natural disaster that occurs annually, especially in the mountainous terrain and steep slopes of northern Thailand. The current flood forecasting systems and tools are available but have low accuracy and efficiency. The numbers of rainfall and runoff stations are less, because the access to the station area is difficult. Additionally, the operation and maintenance costs are high. Hydrological modeling of a SWAT （Soil and Water Assessment Tool） was used in this study with the application of three days weather forecast from the NWP （numerical weather prediction）, which provided temperature, relative humidity, rainfall, sunshine and wind speed. The data from NWP and SWAT were used to simulate the runoff from the Nan River in the last 10 years （2000-2010）. It was found that the simulated flow rate for the main streams using data from NWP were higher than the observations. At the N64 and Nl stations, the ratios of the maximum simulated flow rate to the observations were equal to 108% and 118%, respectively. However, for the tributaries, it was found that the simulated flow rate using NWP data was lower than the observations, but, it was still within the acceptable range of not greater than 20%,6. At N65, D090201 and D090203 stations, the ratio of the maximum simulated flow rate were 90.0%, 83.0% and 86.0%, respectively. This was due to the rainfall from the NWP model being greater than the measured rainfall. The NWP rainfall was distributed all over the area while the rainfall data from the measurements were obtained from specific points. Therefore, the rain from the NWP model is very useful especially for the watershed areas without rain gauge stations. In summary, the data from the NWP can be used with the SWAT model and provides relatively sound results despite the value for the main river being slightly higher than the observed data. Consequently, the output can be used to create a flood map for flash flood warning in the area.
基金supported by the National Key R&D Program of China(Grant No.2017YFC1502202)the National Science Foundation of China(Grant Nos.41675075 and41875135)the National Key R&D Program of China(Grant No.2016YFA0602101)
文摘This review summarizes the scientific and technical progress in atmospheric modeling in China since 2011,including the dynamical core,model physics,data assimilation,ensemble forecasting,and model evaluation strategies.In terms of the dynamical core,important efforts have been made in the improvement of the existing model formulations and in exploring new modeling approaches that can better adapt to massively parallel computers and global multiscale modeling.With regard to model physics,various achievements in physical representations have been made,especially a trend toward scale-aware parameterization for accommodating the increase of model resolution.In the field of data assimilation,a 4D-Var system has been developed and is operationally used by the National Meteorological Center of China,and its performance is promising.Furthermore,ensemble forecasting has played a more important role in operational forecast systems and progressed in many fundamental techniques.Model evaluation strategies,including key performance metrics and standardized experimental protocols,have been proposed and widely applied to better understand the strengths and weaknesses of the systems,offering key routes for model improvement.The paper concludes with a concise summary of the status quo and a brief outlook in terms of future development.
基金the National Key Basic Research Project Research on the Formation Mechanism and Prediction Theory of Severe Synoptic Disasters i
文摘The uncertainties caused by the errors of the initial states and the parameters in the numerical model are investigated. Three problems of predictability in numerical weather and climate prediction are proposed, which are related to the maximum predictable time, the maximum prediction error, and the maximum admissible errors of the initial values and the parameters in the model respectively. The three problems are then formulated into nonlinear optimization problems. Effective approaches to deal with these nonlinear optimization problems are provided. The Lorenz’ model is employed to demonstrate how to use these ideas in dealing with these three problems.
基金Project supported by the National Natural Science Foundation of China （Grant Nos 40575036 and 40325015）.Acknowledgement The authors thank Drs Zhang Pei-Qun and Bao Ming very much for their valuable comments on the present paper.
文摘In this paper, an analogue correction method of errors （ACE） based on a complicated atmospheric model is further developed and applied to numerical weather prediction （NWP）. The analysis shows that the ACE can effectively reduce model errors by combining the statistical analogue method with the dynamical model together in order that the information of plenty of historical data is utilized in the current complicated NWP model, Furthermore, in the ACE, the differences of the similarities between different historical analogues and the current initial state are considered as the weights for estimating model errors. The results of daily, decad and monthly prediction experiments on a complicated T63 atmospheric model show that the performance of the ACE by correcting model errors based on the estimation of the errors of 4 historical analogue predictions is not only better than that of the scheme of only introducing the correction of the errors of every single analogue prediction, but is also better than that of the T63 model.
基金funded by the Special Scientific Research Project for Public Interest (GYHY201206009)the National Key Technologies Research and Development Program (Grant No. 2012BAC22B02)+2 种基金the National Natural Science Foundation Science Fund for Creative Research Groups (Grant No.41221064)the Special Scientific Research Project for Public Interest (Grant No. GYHY201006013)the National Natural Science Foundation of China (Grant No. 41105070 )
文摘The initial value error and the imperfect numerical model are usually considered as error sources of numerical weather prediction （NWP）. By using past multi-time observations and model output, this study proposes a method to estimate imperfect numerical model error. This method can be inversely estimated through expressing the model error as a Lagrange interpolation polynomial, while the coefficients of polyno- mial are determined by past model performance. However, for practical application in the full NWP model, it is necessary to determine the following criteria： （1） the length of past data sufficient for estimation of the model errors, （2） a proper method of estimating the term ＂model integration with the exact solution＂ when solving the inverse problem, and （3） the extent to which this scheme is sensitive to the observational errors. In this study, such issues are resolved using a simple linear model, and an advection diffusion model is applied to discuss the sensitivity of the method to an artificial error source. The results indicate that the forecast errors can be largely reduced using the proposed method if the proper length of past data is chosen. To address the three problems, it is determined that （1） a few data limited by the order of the corrector can be used, （2） trapezoidal approximation can be employed to estimate the ＂term＂ in this study; however, a more accurate method should be explored for an operational NWP model, and （3） the correction is sensitive to observational error.
文摘We used a Lake Shira numerical model to estimate the response of the ecosystem of a saline meromictic lake to variations in weather parameters during the growing season. The sensitivity analysis of the model suggests that compared to other external(nutrient inflows) and internal(spring biomasses of food-web components) factors, weather parameters are among the most influential for both mixolimnetic(phyto-and zooplankton) and monimolimnetic(purple sulfur bacteria, sulfur reducing bacteria and hydrogen sulfide) food-web components. Calculations with different weather scenarios shows how changes in the water temperature and mixing depth af fect mixolimnetic and monimolimnetic food-web components and the depth of the oxic-anoxic interface in a meromictic lake. When weather forcing stimulates an increase in the biomass of food-web components in the mixolimnion, it produces cascading effects that lead to three results: 1) a higher content of detritus in the water column; 2) a higher content of hydrogen sulfide in the monimolimnion; 3) raising of the oxic-anoxic interface closer to the water-air surface. This cascading effect is complicated by the negative correlation between two light dependent primary producers located at diff erent depths—phytoplankton in the mixolimnion and purple sulfur bacteria at the oxic-anoxic interface. Thus, weather conditions that stimulate higher phytoplankton biomass are associated with a higher detritus content and lower biomass of purple sulfur bacteria, a higher content of hydrogen sulfide and a shallower oxic-anoxic interface. The same weather conditions(higher wind, lower cloud cover, and lower air temperature) promote a scenario of less stable thermal stratification. Thus, our calculations suggest that weather parameters during the summer season strongly control the mixing depth, water temperature and the mixolimnetic food web. An effect of biogeochemical and physical interactions on the depth of the oxicanoxic interface is also detectable. However, intra-and interannual climate and weather effects will be more important for the control of meromixis stability.
文摘The cold wave weather process in Jiujiang in the early spring of February 2020 was analyzed.The results show that the establishment of blocking high near Lake Baikal and the rapid southward of cold air after accumulation resulted in the cold wave weather accompanied by strong cooling,hale and rain(snow)weather in Jiujiang.Before the cold wave broke out,the ground warmed up significantly,which was also one of thermal conditions for this cold wave weather.Water vapor conditions were abundant at middle and low levels;at 850 hPa,temperature dropped by 12-14℃during February 14-15,and-4℃isotherm appeared in the southern part of central Jiangxi,which is a favorable condition for rain(snow)in most areas of Jiujiang.
基金Supported by National Natural Science Foundation of China(61572274,61672307,61272225,51261120376)the National Key Technologies R&D Program of China(2015BAF23B03)
文摘Numerical weather simulation data usually comprises various meteorological variables, such as precipitation, temperature and pressure. In practical applications, data generated with several different numerical simulation models are usually used together by forecasters to generate the final forecast. However, it is difficult for forecasters to obtain a clear view of all the data due to its complexity. This has been a great limitation for domain experts to take advantage of all the data in their routine work. In order to help explore the multi-variate and multi-model data, we propose a stamp based exploration framework to assist domain experts in analyzing the data. The framework is used to assist domain experts in detecting the bias patterns between numerical simulation data and observation data. The exploration pipeline originates from a single meteorological variable and extends to multiple variables under the guidance of a designed stamp board. Regional data patterns can be detected by analyzing distinctive stamps on the board or generating extending stamps using the Boolean set operations. Experiment results show that some meteorological phenomena and regional data patterns can be easily detected through the exploration. These can help domain experts conduct the data analysis efficiently and further guide forecasters in producing reliable weather forecast.
基金Scientific Research Projects Specially for Public Welfare Industries(GYHY200906010)National Natural Science Foundation of China(41075034)Project 1009 for Wuhan Heavy Rain Institute
文摘In this paper, based on heavy rain numerical forecast model AREM(Advanced Regional Eta Model), two different initialization schemes, LAPS and GRAPES-3DVAR, are used to run assimilation experiments of AREM-LAPS and AREM-3DVAR with the same data source(NCEP forecast field, surface data and radio-soundings) during the period from 21 May to 30 July 2008 to investigate the effect of the two initialization schemes on the rainfall simulation. The result suggests that:(1) the forecast TS score by the AREM-LAPS is higher than that by the AREM-3DVAR for rainfall in different areas, at different valid time and with different intensity, especially for the heavy rain, rainstorm and extremely heavy rain;(2) the AREM-3DVAR can generally simulate the average rainfall distribution, but the forecast area is smaller and rainfall intensity is weaker than the observation, while the AREM-LAPS significantly improves the forecast;(3) the AREM-LAPS gives a better forecast for the south-north shift of rainfall bands and the rainfall intensity variation than the AREM-3DVAR;(4) the AREM-LAPS can give a better reproduction for the daily change in the mean-rainfall-rate of the main rain band, and rainfall intensity changes in the eastern part of Southwest China, the coastal area in South China, the middle-lower valleys of Yangtze river, the Valleys of Huaihe river, and Shandong peninsula, with the rainfall intensity roughly close to the observation, while the rainfall intensity simulated by the AREM-3DVAR is clearly weaker than the observation, especially in the eastern part of Southwest China; and(5) the comparison verification between the AREM-LAPS and AREM-3DVAR for more than 10 typical rainfall processes in the summer of 2008 indicates that the AREM-LAPS gives a much better forecast than AREM-3DVAR in rain-band area, rainfall location and intensity, and in particular, the rainfall intensity forecast is improved obviously.
基金National Natural Science Foundation of China(U2242203, 42305164, 42175105)Key Innovation Team of China Meteorological Administration (CMA2023ZD08)Science and Technology Research Project of Guangdong Meteorological Service (GRMC2023M31)。
文摘Precise high-temperature weather forecasts are essential, as heatwaves are increasing in frequency under the ongoing climate change. Land-surface schemes have been demonstrated to be crucial to numerical weather predictions.However, few studies have explored the impact of land surface schemes on short-range high-temperature weather forecasts via operational numerical weather prediction models. To evaluate the impact of the soil thermal process on high-temperature weather forecasts, we coupled the soil thermal process of the state-of-the-art Common Land Model(CoLM) with the South China operational numerical weather prediction model(CMA-TRAMS) and compared the coupled model with the original CMA-TRAMS, which incorporated the Simplified Model for land Surface(SMS). Contrast experiments based on two versions of CMA-TRAMS were conducted for the year 2022 when persistent extreme heatwaves were observed in Central-East China. The results are as follows:(1) Short-range high-temperature weather forecasts were sensitive to soil thermal process schemes. The original CMA-TRAMS clearly underestimated the summertime near-surface air temperature(T2m) over almost all areas of China, whereas the CoLM led to a reduction of the negative biases by approximately 0.5°C.(2) The more accurate initial soil temperatures and the deeper soil structure used in the CoLM test contributed to actual predictions of soil heat flux, soil temperature, and T2m. Nevertheless, the SMS test failed to capture upward heat transport from deeper to shallower soil layers at night due to the shallow soil structure and lower accuracy of the bottom and initial soil temperatures.(3) Higher soil temperatures resulted in increased near-surface moisture and cloud cover in the CoLM test, which led to the warmer soil and further mitigated the cold biases of T2m through reduced longwave and shortwave radiation losses at the land surface.
文摘A three-dimensional wind field analysis sollware based on the Beigng-Gucheng dual-Doppler weather radar system has been built, and evaluated by using the numerical cloud model producing storm flow and hydrometeor fields. The effects of observation noise and the spatial distribution of wind field analysis error are also investigated.
基金supported by the National Natural Science Foundation of China[grant numbers 41421004 and 41210007]the International Innovation Team project of the Chinese Academy of Sciences entitled ‘High Resolution Numerical Simulation of Regional Environment’
文摘The data of several rainfall products, including those estimated from satellite measurements and those forecasted via numerical weather modeling, for a severe debris-flow event in Zhouqu, Northwest China, are compared and analyzed in this paper. The satellite products, including CPC MORPHing technique（CMORPH）, TMPA-RT, and PERSIANN are all near-real-time retrieved with high temporal and spatial resolutions. The numerical weather model used in this paper for precipitation forecasting is WRF. The results show that all three satellite products can basically reproduce the rainfall pattern, distribution, timing, scale, and extreme values of the event, compared with gauge data. Their temporal and spatial correlation coefficients with gauge data are as high as about 0.6, which is statistically significant at 0.01 level. The performance of the forecasted results modeled with different spatial resolutions are not as good as the satellite-estimated results, although their correlation coefficients are still statistically significant at 0.05 level. From the total rainfall and extreme value time series for the domain, it is clear that, from the grid-to-grid perspective, the passive microwave-based CMORPH and TRMM products are more accurate than the infrared-based PERSIANN, while PERSIANN performs very well from the general point of view, especially when considering the whole domain or the whole convective precipitation system. The forecasted data — especially the highest resolution model domain data — are able to represent the total or mean precipitation very well in the research domain, while for extreme values the errors are large. This study suggests that satellite-retrieved and model-forecasted rainfall data are a useful complement to gauge data, especially for areas without gauge stations and areas not covered by weather radars.
文摘This paper describes the procedure and methodology to formulate the convective weather potential （CWP） algorithm. The data used in the development of the algorithm are the radar echoes at 0.5° elevation from Guangzhou Doppler Radar Station, surface observations from automatic weather stations （AWS） and outputs of numeric weather prediction （NWP） models. The procedure to develop the CWP algorithm consists of two steps： （1） identification of thunderstorm cells in accordance with specified statistical criteria; and （2） development of the algorithm based on multiple linear regression. The thunderstorm cells were automatically identified by radar echoes with intensity greater than or equal to 50 dB（Z） and of an area over 64 square kilometers. These cells are generally related to severe convective weather occurrences such as thunderstorm wind gusts, hail and tornados. In the development of the CWP algorithm, both echo- and environment-based predictors are used. The predictand is the probability of a thunderstorm cell to generate severe convective weather events. The predictor-predictand relationship is established through a stepwise multiple linear regression approach. Verification with an independent dataset shows that the CWP algorithm is skillful in detecting thunderstorm-related severe convective weather occurrences in the Pearl River Delta （PRD） region of South China. An example of a nowcasting case for a thunderstorm process is illustrated.
基金National Key Research and Development Program of China(2017YFC1502104)Beijige Foundation of NJIAS(BJG202103)。
文摘The correction of model forecast is an important step in evaluating weather forecast results.In recent years,post-processing models based on deep learning have become prominent.In this paper,a deep learning model named EDConvLSTM based on encoder-decoder structure and ConvLSTM is developed,which appears to be able to effectively correct numerical weather forecasts.Compared with traditional post-processing methods and convolutional neural networks,ED-ConvLSTM has strong collaborative extraction ability to effectively extract the temporal and spatial features of numerical weather forecasts and fit the complex nonlinear relationship between forecast field and observation field.In this paper,the post-processing method of ED-ConvLSTM for 2 m temperature prediction is tested using The International Grand Global Ensemble dataset and ERA5-Land data from the European Centre for Medium-Range Weather Forecasts(ECMWF).Root mean square error and temperature prediction accuracy are used as evaluation indexes to compare ED-ConvLSTM with the method of model output statistics,convolutional neural network postprocessing methods,and the original prediction by the ECMWF.The results show that the correction effect of EDConvLSTM is better than that of the other two postprocessing methods in terms of the two indexes,especially in the long forecast time.
基金supported by a research grant of “Development of a Polarimetric Radar Data Simulator for Local Forecasting Model (Ⅱ)” by the KMAsupport was provided by a NOAA Warn-on-Forecast grant (Grant No. NA16OAR4320115)a National Science Foundation grant (Grant No. AGS-1261776)
文摘The UK Met Office Unified Model（UM） is employed by many weather forecasting agencies around the globe. This model is designed to run across spatial and time scales and known to produce skillful predictions for large-scale weather systems. However, the model has only recently begun running operationally at horizontal grid spacings of ～1.5 km [e.g.,at the UK Met Office and the Korea Meteorological Administration（KMA）]. As its microphysics scheme was originally designed and tuned for large-scale precipitation systems, we investigate the performance of UM microphysics to determine potential inherent biases or weaknesses. Two rainfall cases from the KMA forecasting system are considered in this study： a Changma（quasi-stationary） front, and Typhoon Sanba（2012）. The UM output is compared to polarimetric radar observations in terms of simulated polarimetric radar variables. Results show that the UM generally underpredicts median reflectivity in stratiform rain, producing high reflectivity cores and precipitation gaps between them. This is partially due to the diagnostic rain intercept parameter formulation used in the one-moment microphysics scheme. Model drop size is generally both underand overpredicted compared to observations. UM frozen hydrometeors favor generic ice（crystals and snow） rather than graupel, which is reasonable for Changma and typhoon cases. The model performed best with the typhoon case in terms of simulated precipitation coverage.
文摘This paper introduces several alternative statistical approaches to modeling and prediction of electric energy generated by photovoltaic farms. The statistical models use outputs of a numerical weather prediction model as their inputs. Presented statistical models allow for easy-to-compute predictions, both in temporal sense and for out-of-sample individual farms. Model performance is illustrated on a sample of real photovoltaic farms located in the Czech Republic.
