Pulsed eddy current （PEC） non-destructive test- ing and evaluation （NDT＆E） has been around for some time and it is still attracting extensive attention from researchers around the globe, which can be witnessed th...Pulsed eddy current （PEC） non-destructive test- ing and evaluation （NDT＆E） has been around for some time and it is still attracting extensive attention from researchers around the globe, which can be witnessed through the reports reviewed in this paper. Thanks to its richness of spectral components, various applications of this technique have been proposed and reported in the lit- erature covering both structural integrity inspection and material characterization in various industrial sectors. To support its development and for better understanding of the phenomena around the transient induced eddy currents, attempts for its modelling both analytically and numeri- cally have been made by researchers around the world. This review is an attempt to capture the state-of-the-art development and applications of PEC, especially in the last 15 years and it is not intended to be exhaustive. Future challenges and opportunities for PEC NDT＆E are also presented.展开更多
X-rays are widely used in the non-destructive testing(NDT)of electrical equipment.Radio frequency(RF)electron linear accelerators can generate MeV high-energy X-rays with strong penetrating ability;however,the system ...X-rays are widely used in the non-destructive testing(NDT)of electrical equipment.Radio frequency(RF)electron linear accelerators can generate MeV high-energy X-rays with strong penetrating ability;however,the system generally has a large scale,which is not suitable for on-site testing.Compared with the S-band(S-linac)at the same stage of beam energy,the accelerator working in the X-band(X-linac)can compress the facility scale by over 2/3 in the longitudinal direction,which is convenient for the on-site NDT of electrical equipment.To address the beam quality and design complexity simultaneously,the non-dominated sorting genetic algorithmⅡ(NSGA-Ⅱ),which is a multi-objective genetic algorithm(MOGA),was developed to optimize the cavity chain design of the X-linac.Additionally,the designs of the focusing coils,electron gun,and RF couplers,which are other key components of the X-linac,were introduced in this context.In particular,the focusing coil distributions were optimized using a genetic algorithm.Furthermore,after designing such key components,PARMELA software was adopted to perform beam dynamics calculations with the optimized accelerating fields and magnetic fields.The results show that the beam performance was obtained with a capture ratio of more than 90%,an energy spread of less than 10%,and an average energy of approximately 3 MeV.The design and simulation results indicate that the proposed NSGAⅡ-based approach is feasible for X-linac accelerator design.Furthermore,it can be generalized as a universal technique for industrial electron linear accelerators provided that specific optimization objectives and constraints are set according to different application scenarios and requirements.展开更多
Longitudinal joint construction quality is critical to the life of flexible pavements.Maintaining deteriorated longitudinal joints has become a challenge for many highway agencies.Improving the joint's quality thr...Longitudinal joint construction quality is critical to the life of flexible pavements.Maintaining deteriorated longitudinal joints has become a challenge for many highway agencies.Improving the joint's quality through better compaction during construction can help achieve flexible pavements with longer service lives and less maintenance.Current quality control(QC)and quality assurance(QA)plans provide limited coverage.Consequently,the risk of missing areas with poor joint compaction is significant.A density profiling system(DPS)is a non-destructive alternative to conventional destructive evaluation methods.It can provide quick and continuous real-time coverage of the compaction during construction in dielectrics.The paper presents several case studies comparing various types of longitudinal joints and demonstrating the use of DPS to evaluate the joint's compaction quality.The paper shows that dielectric measurements can provide valuable insight into the ability of various construction techniques to achieve adequate levels of compaction at the longitudinal joint.The paper proposes a dielectric-based longitudinal joint quality index(LJQI)to evaluate the relative compaction of the joint during construction.It also shows that adopting DPS for assessing the compaction of longitudinal joints can minimize the risk of agencies accepting poorly constructed joints,identify locations of poor quality during construction,and achieve better-performing flexible pavements.展开更多
Subgrade engineering is a fundamental aspect of infrastructure construction in China.As the primary structural element responsible for bearing and distributing traffic loads,the subgrade must not only withstand the su...Subgrade engineering is a fundamental aspect of infrastructure construction in China.As the primary structural element responsible for bearing and distributing traffic loads,the subgrade must not only withstand the substantial pressures exerted by vehicles,trains,and other forms of transportation,but also efficiently transfer these loads to the underlying foundation,ensuring the stability and longevity of the roadway.In recent years,advancements in subgrade engineering technology have propelled the industry towards smarter,greener,and more sustainable practices,particularly in the areas of intelligent monitoring,disaster management,and innovative construction methods.This paper reviews the application and methodologies of intelligent testing equipment,including cone penetration testing(CPT)devices,soil resistivity testers,and intelligent rebound testers,in subgrade engineering.It examines the operating principles,advantages,limitations,and application ranges of these tools in subgrade testing.Additionally,the paper evaluates the practical use of advanced equipment from both domestic and international perspectives,addressing the challenges encountered by various instruments in realworld applications.These devices enable precise,comprehensive testing and evaluation of subgrade conditions at different stages,providing real-time data analysis and intelligent early warnings.This supports effective subgrade health management and maintenance.As intelligent technologies continue to evolve and integrate,these tools will increasingly enhance the accuracy,efficiency,and sustainability of subgrade monitoring.展开更多
BACKGROUND Stable angina pectoris,a clinical manifestation of coronary artery disease(CAD),is commonly evaluated using non-invasive diagnostic tools.Traditionally,stress testing modalities such as exercise electrocard...BACKGROUND Stable angina pectoris,a clinical manifestation of coronary artery disease(CAD),is commonly evaluated using non-invasive diagnostic tools.Traditionally,stress testing modalities such as exercise electrocardiography(ECG),myocardial per-fusion imaging(MPI),and stress echocardiography have been the first-line stra-tegies.However,coronary computed tomography angiography(CCTA),an anatomic imaging modality,is increasingly used for its ability to directly visualize coronary artery stenoses and plaque burden.Despite growing adoption,the comparative effectiveness of CCTA and stress testing in terms of diagnostic accuracy,prognostic value,and clinical outcomes in stable angina remains an area of active debate.AIM To compare the diagnostic and prognostic performance of CCTA with various forms of stress testing in adult patients presenting with suspected or confirmed stable angina.METHODS A comprehensive literature search was performed across PubMed,EMBASE,Scopus,and the Cochrane Central Register of Controlled Trials in accordance with the PRISMA guidelines.Only randomized controlled trials(RCT)published in English within the last 15 years were included.Studies involving adult patients(≥18 years)with stable angina or low-risk chest pain were selected.The intervention was CCTA,and the comparators included ECG,MPI,and stress echocardiography.Data were extracted using a standardized process,and study quality was assessed using the Cochrane Risk of Bias 2.0 tool.Due to heterogeneity in outcome measures and modalities,narrative synthesis was employed.RESULTS Five high-quality RCTs encompassing a total of 5551 patients were included.CCTA demonstrated superior diagnostic accuracy and prognostic capability across multiple studies.It was more effective in predicting major adverse cardiac events,including myocardial infarction and cardiac death,and was associated with fewer un-necessary invasive coronary angiographies and better event-free survival.Studies also reported improved revascu-larization rates in patients evaluated with CCTA,particularly within tiered diagnostic protocols.Stress testing,while useful,showed limitations in sensitivity and downstream clinical decision-making.CONCLUSION CCTA offers a diagnostically superior and clinically impactful strategy for the initial evaluation of patients with stable angina,especially those with intermediate pretest probability of CAD.Compared to conventional stress testing,it enhances risk stratification,reduces unnecessary procedures,and may improve long-term outcomes.These findings support its broader integration into diagnostic pathways for stable angina.展开更多
Bridges are important elements in road system and can influence the entire economy of cities and region. Usually, these structures have high financial investments for their constructions, in this way, maintenance and ...Bridges are important elements in road system and can influence the entire economy of cities and region. Usually, these structures have high financial investments for their constructions, in this way, maintenance and conservation become so important. Inspection is a technical activity that covers several operations, including performance analysis; examination; final performance report, other operations may be necessary, such as maintenance work, recovery, strengthening and rehabilitation. Technical examination together with some test methods allows a critical and parametric judgment of the bridge performance by minimizing the subjectivity of visual evaluations, and permits a more detailed diagnosis. This paper discusses the methodology to perform tests to complement the assessment recommended by DNIT （Brazilian National Department of Transport Infrastructure）, which consists only on a visual judgment. This approach provides technical basis to classify the bridges as its need and urgency of maintenance.展开更多
Phase aberration correction for medical ultrasound systems has attracted a great deal of attention. Since phased array techniques are now widely employed for industrial non-destructive testing （NDT） applications in ...Phase aberration correction for medical ultrasound systems has attracted a great deal of attention. Since phased array techniques are now widely employed for industrial non-destructive testing （NDT） applications in various fields, the problem of phase aberrations in the process of NDT testing is considered. The technique of cross-covariance for phase aberration correction is presented. The performance of the technique for phase aberration correction is tested by means of echo signals obtained in practical non-destructive testing experiment. The results show that the technique has the better accuracy of phase correction.展开更多
Cemented paste backfill(CPB)is a technology that achieves safe mining by filling the goaf with waste rocks,tailings,and other materials.It is an inevitable choice to deal with the development of deep and highly diffic...Cemented paste backfill(CPB)is a technology that achieves safe mining by filling the goaf with waste rocks,tailings,and other materials.It is an inevitable choice to deal with the development of deep and highly difficult mines and meet the requirements of environmental protection and safety regulations.It promotes the development of a circular economy in mines through the development of lowgrade resources and the resource utilization of waste,and extends the service life of mines.The mass concentration of solid content(abbreviated as“concentration”)is a critical parameter for CPB.However,discrepancies often arise between the on-site measurements and the pre-designed values due to factors such as groundwater inflow and segregation within the goaf,which cannot be evaluated after the solidification of CPB.This paper innovatively provides an in-situ non-destructive approach to identify the real concentration of CPB after curing for certain days using hyperspectral imaging(HSI)technology.Initially,the spectral variation patterns under different concentration conditions were investigated through hyperspectral scanning experiments on CPB samples.The results demonstrate that as the CPB concentration increases from 61wt%to 73wt%,the overall spectral reflectance gradually increases,with two distinct absorption peaks observed at 1407 and 1917 nm.Notably,the reflectance at 1407 nm exhibited a strong linear relationship with the concentration.Subsequently,the K-nearest neighbors(KNN)and support vector machine(SVM)algorithms were employed to classify and identify different concentrations.The study revealed that,with the KNN algorithm,the highest accuracy was achieved when K(number of nearest neighbors)was 1,although this resulted in overfitting.When K=3,the model displayed the optimal balance between accuracy and stability,with an accuracy of 95.03%.In the SVM algorithm,the highest accuracy of 98.24%was attained with parameters C(regularization parameter)=200 and Gamma(kernel coefficient)=10.A comparative analysis of precision,accuracy,and recall further highlighted that the SVM provided superior stability and precision for identifying CPB concentration.Thus,HSI technology offers an effective solution for the in-situ,non-destructive monitoring of CPB concentration,presenting a promising approach for optimizing and controlling CPB characteristic parameters.展开更多
China has pledged to peak carbon dioxide(CO_(2))emissions by 2030 and achieve carbon neutrality by 2060.Carbon capture and storage(CCS)will play a key role in these efforts.Over the past several years,the China Geolog...China has pledged to peak carbon dioxide(CO_(2))emissions by 2030 and achieve carbon neutrality by 2060.Carbon capture and storage(CCS)will play a key role in these efforts.Over the past several years,the China Geological Survey(CGS)has completed the Suitability Evaluation Map of CO_(2)Geological Storage in Main Sedimentary Basins in China and Adjacent Sea Regions in 2017.This map reflects the suitability of the first-and secondary-order tectonic units within sedimentary basins for cO_(2)geological storage for CCS planning.The Junggar Basin is recognized as an important region for future CCS projects.Results from a mesoscale evaluation using the volume method indicate that deep saline aquifers represent the most significant resources for CO_(2)storage,with potential ranging from 48×10^(9)to 164×10^(9)t(with a P50 value of 96×10^(9)t).The highest storage potential is identified in the central and northern parts of the basin,reaching up to 9.5×10^(6)t/km^(2)at the P50 probability level.In contrast,the hinterland,eastern,and western parts of the basin generally exhibit storage potential of below 1.0×10^(6)t/km^(2)at the same probability level.The CGs has also characterized historical CO_(2)plume migration in reservoirs at the storage site of the Shenhua CCS demonstration project and conducted numerical simulations of CO_(2)plume migration for periods of 10 and 20 years following the shutdown of the injection well.The CGS implemented a kiloton-scale pilot test on CO_(2)-enhanced water recovery(CO_(2)-EWR)in eastern Junggar,revealing that CO_(2)flooding can improve the pressure for fluid production,with the highest ratio of CO_(2)to produced fluids estimated at approximately 1.2.Besides,an observation field for natural CO_(2)leakage,covering about 930 m^(2),was built in Qinghai Province.In natural CO_(2)fields or at artificial CO_(2)injection research sites,cO_(2)leakage points are primarily related to the distribution of faults(especially fault crossing),which can serve as pathways for CO_(2)leakage.The observation field provides a natural analog to wellbore failure and offers an opportunity to further monitor CO_(2)geological storage sites.However,it has been inferred that borehole ZK10 at the observation field has become a leakage pathway due to the drilling activities,inadequate well-plugging,and abandonment procedures without considering CO_(2)corrosion.展开更多
Composite materials are increasingly used in the aerospace industry.To fully realise the weight saving potential along with superior mechanical properties that composites offer in safety critical applications,reliable...Composite materials are increasingly used in the aerospace industry.To fully realise the weight saving potential along with superior mechanical properties that composites offer in safety critical applications,reliable Non-Destructive Testing(NDT)methods are required to prevent catastrophic failures.This paper will review the state of the art in the field and point to highlight the success and challenges that different NDT methods are faced to evaluate the integrity of critical aerospace composites.The focus will be on advanced certificated NDT methods for damage detection and characterization in composite laminates for use in the aircraft primary and secondary structures.展开更多
Actual sea condition testing and inspection and evaluation method research are carried out for tidal energy devices to provide scientific and effective technical support for the ocean high-tech achievement transformat...Actual sea condition testing and inspection and evaluation method research are carried out for tidal energy devices to provide scientific and effective technical support for the ocean high-tech achievement transformation and marine renewable energy development. By analyzing three core indicators, including the power output characteristics of the tidal current device, the generating capacity, energy conversion efficiency, proposed the test contents and evaluation methods of indicators are proposed in this paper; and based on the research of wind farms, power quality testing and assessment methods of offshore tidal energy device are proposed; given the security access to the test contents of tidal current energy device, tidal current energy device running conditions in the testing ground are comprehensively assessed.展开更多
The early involvement of test and evaluation can significantly reduce the cost of modifying issues and errors found in the later stages of aircraft development and design process.This paper presents a methodology for ...The early involvement of test and evaluation can significantly reduce the cost of modifying issues and errors found in the later stages of aircraft development and design process.This paper presents a methodology for aircraft mission effectiveness evaluation and design space exploration based on Virtual Operational Test(VOT),incorporating Virtual Open Scenario(VOS)and User in Scenarios(UIS)concepts.By employing modeling and simulation technologies in the early stages of aircraft development and design,a virtual environment can be constructed,allowing aircraft users to participate more closely and conveniently in the design process.Virtual tests conducted by users within the mission context provide data on mission effectiveness and critical user feedback.This paper outlines the main components of the virtual operational test process and related conceptual methods,and discusses an open support system framework that supports VOT.The effectiveness and adaptability of the method are demonstrated through two case studies:a beyond-visual-range air combat scenario and a helicopter ground attack scenario.These case studies demonstrate the evaluation of aircraft mission effectiveness and the sensitivity analysis and optimization of design and operational parameters based on VOT.展开更多
In recent years, advanced composite structures are used extensively in many industries such as aerospace, aircraft, automobile, pipeline and civil engineering. Reliability and safety are crucial requirements posed by ...In recent years, advanced composite structures are used extensively in many industries such as aerospace, aircraft, automobile, pipeline and civil engineering. Reliability and safety are crucial requirements posed by them to the advanced composite structures be- cause of their harsh working conditions. Therefore, as a very important measure, structural health monitoring （SHM） in-service is deft- nitely demanded for ensuring their safe working in-situ. In this paper, fiber Bragg grating （FBG） sensors are surface-mounted on the hoop and in the axial directions of a FRP pressure vessel to monitor the strain status during its pressurization. The experimental results show that the FBG sensors could be used to monitor the strain development and determine the ultimate failure strain of the composite pressure vessel.展开更多
As the increasing popularity and complexity of Web applications and the emergence of their new characteristics, the testing and maintenance of large, complex Web applications are becoming more complex and difficult. W...As the increasing popularity and complexity of Web applications and the emergence of their new characteristics, the testing and maintenance of large, complex Web applications are becoming more complex and difficult. Web applications generally contain lots of pages and are used by enormous users. Statistical testing is an effective way of ensuring their quality. Web usage can be accurately described by Markov chain which has been proved to be an ideal model for software statistical testing. The results of unit testing can be utilized in the latter stages, which is an important strategy for bottom-to-top integration testing, and the other improvement of extended Markov chain model (EMM) is to present the error type vector which is treated as a part of page node. this paper also proposes the algorithm for generating test cases of usage paths. Finally, optional usage reliability evaluation methods and an incremental usability regression testing model for testing and evaluation are presented. Key words statistical testing - evaluation for Web usability - extended Markov chain model (EMM) - Web log mining - reliability evaluation CLC number TP311. 5 Foundation item: Supported by the National Defence Research Project (No. 41315. 9. 2) and National Science and Technology Plan (2001BA102A04-02-03)Biography: MAO Cheng-ying (1978-), male, Ph.D. candidate, research direction: software testing. Research direction: advanced database system, software testing, component technology and data mining.展开更多
Photoacoustic(PA)imaging has been widely used in biomedical research and preclinical studies during the past two decades.It has also been explored for nondestructive testing and evaluation(NDT/E)and for industrial app...Photoacoustic(PA)imaging has been widely used in biomedical research and preclinical studies during the past two decades.It has also been explored for nondestructive testing and evaluation(NDT/E)and for industrial applications.This paper describes the basic principles of PA technology for NDT/E and its applications in recent years.PA technology for NDT/E includes the use of a modulated continuous-wave laser and a pulsed laser for PA wave excitation,PA-generated ultrasonic waves,and all-optical PA wave excitation and detection.PA technology for NDT/E has demonstrated broad applications,including the imaging of railway cracks and defects,the imaging of Li metal batteries,the measurements of the porosity and Young’s modulus,the detection of defects and damage in silicon wafers,and a visualization of underdrawings in paintings.展开更多
Following publication of the original article[1],the authors identified an error in the article title.The first word ‘Review’ is added mistakenly by the typesetter.
Aiming at the problems of low reliability and complex operation of traditional coin-tap test of composite material,this paper introduces the grey system theory and achieves better performance.The response signals of c...Aiming at the problems of low reliability and complex operation of traditional coin-tap test of composite material,this paper introduces the grey system theory and achieves better performance.The response signals of coin-tap are classified through the grey clustering based on relation analysis,and corresponding improvements are made to the calculation method of the relation degree of nearness.First,the time history of acceleration is taken as the system behavior sequence.The improved correlation calculation method is used to solve the relation degree of nearness between the sequences,and the matrix of degree of grey relation is constructed based on this.Then,the sequence groups are summarized through the matrix,and the response signals of coin-tap are qualitatively classified according to the location of the reference sequence.Finally,the defect detection of composite materials is completed without pre-testing.The test results show that the accuracy of the coin-tap test based on improved grey clustering reaches 100%,which simplifies the operation steps while ensuring the reliability of the coin-tap test results.展开更多
Non-destructive testing (NDT) of structures is one of the most important tasksof the proper maintenance and diagnosis of machines and constructions structuralcondition. NDT methods contribute to the damage tolerance p...Non-destructive testing (NDT) of structures is one of the most important tasksof the proper maintenance and diagnosis of machines and constructions structuralcondition. NDT methods contribute to the damage tolerance philosophy used in theaircraft design methodology as well as many other operation and maintenance programsof machinery and constructions. The following study is focusing on overviewing animportant group of NDT methods: the optical and other ones, which found broadapplicability in scientific and industrial studies nowadays. The paper discusses theselected most widely applicable methods, namely, visual testing, ultrasonic testing,radiographic testing, infrared thermography as well as electronic speckle patterninterferometry and shearographic testing. Besides the basic principles of testing usingthese methods, their potential applications in various industrial and technologicalbranches are broadly discussed. The analysis as categorization of the NDT methodsprovided in this paper may help in selection of such methods in diagnosis of varioustypes of structures and defects and damage occurring in these structures.展开更多
The characterization of ultra-soft clayey soil exhibits extreme challenges due to low shear strength of such material.Hence,inspecting the non-destructive electrical impedance behavior of untreated and treated ultra-s...The characterization of ultra-soft clayey soil exhibits extreme challenges due to low shear strength of such material.Hence,inspecting the non-destructive electrical impedance behavior of untreated and treated ultra-soft clayey soils gains more attention.Both shear strength and electrical impedance were measured experimentally for both untreated and treated ultra-soft clayey soils.The shear strength of untreated ultra-soft clayey soil reached 0.17 kPa for 10% bentonite content,while the shear strengths increased to 0.27 kPa and 6.7 kPa for 10% bentonite content treated with 2% lime and 10% polymer,respectively.The electrical impedance of the ultra-soft clayey soil has shown a significant decrease from 1.6 kΩ to 0.607 kΩ when the bentonite content increased from 2% to 10% at a frequency of 300 kHz.The10%lime and 10% polymer treatments have decreased the electrical impedances of ultra-soft clayey soil with 10%bentonite from 0.607 kΩ to 0.12 kΩ and 0.176 kΩ,respectively,at a frequency of 300 kHz.A new mathematical model has been accordingly proposed to model the non-destructive electrical impedancefrequency relationship for both untreated and treated ultra-soft clayey soils.The new model has shown a good agreement with experimental data with coefficient of determination（R;）up to 0.99 and root mean square error（RMSE） of 0.007 kΩ.展开更多
Optoelectronic terahertz generation and detection play a key role in the applications of non-destructive testing,which involves different areas such as physics,biological,material science,imaging,explosions detection,...Optoelectronic terahertz generation and detection play a key role in the applications of non-destructive testing,which involves different areas such as physics,biological,material science,imaging,explosions detection,astronomy applications,semiconductor technology and superconductiong electronics. In this article,we present a reviewof the principle and performance of typical terahertz sources,detectors and non-destructive testing applications. On this basis,the newdevelopment and trends of terahertz radiation detectors are also discussed.展开更多
基金Ministry of Higher Education of Malaysia for funding the project on PEC NDT at IIUM through the research grant FRGS16-059-0558supported by the National Natural Science Foundation of China under research grants 51677187 and 51307172
文摘Pulsed eddy current （PEC） non-destructive test- ing and evaluation （NDT＆E） has been around for some time and it is still attracting extensive attention from researchers around the globe, which can be witnessed through the reports reviewed in this paper. Thanks to its richness of spectral components, various applications of this technique have been proposed and reported in the lit- erature covering both structural integrity inspection and material characterization in various industrial sectors. To support its development and for better understanding of the phenomena around the transient induced eddy currents, attempts for its modelling both analytically and numeri- cally have been made by researchers around the world. This review is an attempt to capture the state-of-the-art development and applications of PEC, especially in the last 15 years and it is not intended to be exhaustive. Future challenges and opportunities for PEC NDT＆E are also presented.
基金supported by the National Natural Science Foundation of China(Nos.12341501 and 12575164)。
文摘X-rays are widely used in the non-destructive testing(NDT)of electrical equipment.Radio frequency(RF)electron linear accelerators can generate MeV high-energy X-rays with strong penetrating ability;however,the system generally has a large scale,which is not suitable for on-site testing.Compared with the S-band(S-linac)at the same stage of beam energy,the accelerator working in the X-band(X-linac)can compress the facility scale by over 2/3 in the longitudinal direction,which is convenient for the on-site NDT of electrical equipment.To address the beam quality and design complexity simultaneously,the non-dominated sorting genetic algorithmⅡ(NSGA-Ⅱ),which is a multi-objective genetic algorithm(MOGA),was developed to optimize the cavity chain design of the X-linac.Additionally,the designs of the focusing coils,electron gun,and RF couplers,which are other key components of the X-linac,were introduced in this context.In particular,the focusing coil distributions were optimized using a genetic algorithm.Furthermore,after designing such key components,PARMELA software was adopted to perform beam dynamics calculations with the optimized accelerating fields and magnetic fields.The results show that the beam performance was obtained with a capture ratio of more than 90%,an energy spread of less than 10%,and an average energy of approximately 3 MeV.The design and simulation results indicate that the proposed NSGAⅡ-based approach is feasible for X-linac accelerator design.Furthermore,it can be generalized as a universal technique for industrial electron linear accelerators provided that specific optimization objectives and constraints are set according to different application scenarios and requirements.
文摘Longitudinal joint construction quality is critical to the life of flexible pavements.Maintaining deteriorated longitudinal joints has become a challenge for many highway agencies.Improving the joint's quality through better compaction during construction can help achieve flexible pavements with longer service lives and less maintenance.Current quality control(QC)and quality assurance(QA)plans provide limited coverage.Consequently,the risk of missing areas with poor joint compaction is significant.A density profiling system(DPS)is a non-destructive alternative to conventional destructive evaluation methods.It can provide quick and continuous real-time coverage of the compaction during construction in dielectrics.The paper presents several case studies comparing various types of longitudinal joints and demonstrating the use of DPS to evaluate the joint's compaction quality.The paper shows that dielectric measurements can provide valuable insight into the ability of various construction techniques to achieve adequate levels of compaction at the longitudinal joint.The paper proposes a dielectric-based longitudinal joint quality index(LJQI)to evaluate the relative compaction of the joint during construction.It also shows that adopting DPS for assessing the compaction of longitudinal joints can minimize the risk of agencies accepting poorly constructed joints,identify locations of poor quality during construction,and achieve better-performing flexible pavements.
基金supported by the National Natural Science Foundation of China for Distinguished Young Scholars(Grant No.42225206)National Natural Science Foundation of China(42207180,42477209,42302320).
文摘Subgrade engineering is a fundamental aspect of infrastructure construction in China.As the primary structural element responsible for bearing and distributing traffic loads,the subgrade must not only withstand the substantial pressures exerted by vehicles,trains,and other forms of transportation,but also efficiently transfer these loads to the underlying foundation,ensuring the stability and longevity of the roadway.In recent years,advancements in subgrade engineering technology have propelled the industry towards smarter,greener,and more sustainable practices,particularly in the areas of intelligent monitoring,disaster management,and innovative construction methods.This paper reviews the application and methodologies of intelligent testing equipment,including cone penetration testing(CPT)devices,soil resistivity testers,and intelligent rebound testers,in subgrade engineering.It examines the operating principles,advantages,limitations,and application ranges of these tools in subgrade testing.Additionally,the paper evaluates the practical use of advanced equipment from both domestic and international perspectives,addressing the challenges encountered by various instruments in realworld applications.These devices enable precise,comprehensive testing and evaluation of subgrade conditions at different stages,providing real-time data analysis and intelligent early warnings.This supports effective subgrade health management and maintenance.As intelligent technologies continue to evolve and integrate,these tools will increasingly enhance the accuracy,efficiency,and sustainability of subgrade monitoring.
文摘BACKGROUND Stable angina pectoris,a clinical manifestation of coronary artery disease(CAD),is commonly evaluated using non-invasive diagnostic tools.Traditionally,stress testing modalities such as exercise electrocardiography(ECG),myocardial per-fusion imaging(MPI),and stress echocardiography have been the first-line stra-tegies.However,coronary computed tomography angiography(CCTA),an anatomic imaging modality,is increasingly used for its ability to directly visualize coronary artery stenoses and plaque burden.Despite growing adoption,the comparative effectiveness of CCTA and stress testing in terms of diagnostic accuracy,prognostic value,and clinical outcomes in stable angina remains an area of active debate.AIM To compare the diagnostic and prognostic performance of CCTA with various forms of stress testing in adult patients presenting with suspected or confirmed stable angina.METHODS A comprehensive literature search was performed across PubMed,EMBASE,Scopus,and the Cochrane Central Register of Controlled Trials in accordance with the PRISMA guidelines.Only randomized controlled trials(RCT)published in English within the last 15 years were included.Studies involving adult patients(≥18 years)with stable angina or low-risk chest pain were selected.The intervention was CCTA,and the comparators included ECG,MPI,and stress echocardiography.Data were extracted using a standardized process,and study quality was assessed using the Cochrane Risk of Bias 2.0 tool.Due to heterogeneity in outcome measures and modalities,narrative synthesis was employed.RESULTS Five high-quality RCTs encompassing a total of 5551 patients were included.CCTA demonstrated superior diagnostic accuracy and prognostic capability across multiple studies.It was more effective in predicting major adverse cardiac events,including myocardial infarction and cardiac death,and was associated with fewer un-necessary invasive coronary angiographies and better event-free survival.Studies also reported improved revascu-larization rates in patients evaluated with CCTA,particularly within tiered diagnostic protocols.Stress testing,while useful,showed limitations in sensitivity and downstream clinical decision-making.CONCLUSION CCTA offers a diagnostically superior and clinically impactful strategy for the initial evaluation of patients with stable angina,especially those with intermediate pretest probability of CAD.Compared to conventional stress testing,it enhances risk stratification,reduces unnecessary procedures,and may improve long-term outcomes.These findings support its broader integration into diagnostic pathways for stable angina.
文摘Bridges are important elements in road system and can influence the entire economy of cities and region. Usually, these structures have high financial investments for their constructions, in this way, maintenance and conservation become so important. Inspection is a technical activity that covers several operations, including performance analysis; examination; final performance report, other operations may be necessary, such as maintenance work, recovery, strengthening and rehabilitation. Technical examination together with some test methods allows a critical and parametric judgment of the bridge performance by minimizing the subjectivity of visual evaluations, and permits a more detailed diagnosis. This paper discusses the methodology to perform tests to complement the assessment recommended by DNIT （Brazilian National Department of Transport Infrastructure）, which consists only on a visual judgment. This approach provides technical basis to classify the bridges as its need and urgency of maintenance.
基金National Natural Science Foundation of China(No.61201412)Ntural Science Foundation of Shanxi Province(No.2012021011-5)
文摘Phase aberration correction for medical ultrasound systems has attracted a great deal of attention. Since phased array techniques are now widely employed for industrial non-destructive testing （NDT） applications in various fields, the problem of phase aberrations in the process of NDT testing is considered. The technique of cross-covariance for phase aberration correction is presented. The performance of the technique for phase aberration correction is tested by means of echo signals obtained in practical non-destructive testing experiment. The results show that the technique has the better accuracy of phase correction.
基金funded by the National Natural Science Foundation of China(Nos.52474165 and 52522404)。
文摘Cemented paste backfill(CPB)is a technology that achieves safe mining by filling the goaf with waste rocks,tailings,and other materials.It is an inevitable choice to deal with the development of deep and highly difficult mines and meet the requirements of environmental protection and safety regulations.It promotes the development of a circular economy in mines through the development of lowgrade resources and the resource utilization of waste,and extends the service life of mines.The mass concentration of solid content(abbreviated as“concentration”)is a critical parameter for CPB.However,discrepancies often arise between the on-site measurements and the pre-designed values due to factors such as groundwater inflow and segregation within the goaf,which cannot be evaluated after the solidification of CPB.This paper innovatively provides an in-situ non-destructive approach to identify the real concentration of CPB after curing for certain days using hyperspectral imaging(HSI)technology.Initially,the spectral variation patterns under different concentration conditions were investigated through hyperspectral scanning experiments on CPB samples.The results demonstrate that as the CPB concentration increases from 61wt%to 73wt%,the overall spectral reflectance gradually increases,with two distinct absorption peaks observed at 1407 and 1917 nm.Notably,the reflectance at 1407 nm exhibited a strong linear relationship with the concentration.Subsequently,the K-nearest neighbors(KNN)and support vector machine(SVM)algorithms were employed to classify and identify different concentrations.The study revealed that,with the KNN algorithm,the highest accuracy was achieved when K(number of nearest neighbors)was 1,although this resulted in overfitting.When K=3,the model displayed the optimal balance between accuracy and stability,with an accuracy of 95.03%.In the SVM algorithm,the highest accuracy of 98.24%was attained with parameters C(regularization parameter)=200 and Gamma(kernel coefficient)=10.A comparative analysis of precision,accuracy,and recall further highlighted that the SVM provided superior stability and precision for identifying CPB concentration.Thus,HSI technology offers an effective solution for the in-situ,non-destructive monitoring of CPB concentration,presenting a promising approach for optimizing and controlling CPB characteristic parameters.
基金funded by the National Natural Science Foundation of China(No.42141013)China Geological Survey(DD20221818,DD20242513).
文摘China has pledged to peak carbon dioxide(CO_(2))emissions by 2030 and achieve carbon neutrality by 2060.Carbon capture and storage(CCS)will play a key role in these efforts.Over the past several years,the China Geological Survey(CGS)has completed the Suitability Evaluation Map of CO_(2)Geological Storage in Main Sedimentary Basins in China and Adjacent Sea Regions in 2017.This map reflects the suitability of the first-and secondary-order tectonic units within sedimentary basins for cO_(2)geological storage for CCS planning.The Junggar Basin is recognized as an important region for future CCS projects.Results from a mesoscale evaluation using the volume method indicate that deep saline aquifers represent the most significant resources for CO_(2)storage,with potential ranging from 48×10^(9)to 164×10^(9)t(with a P50 value of 96×10^(9)t).The highest storage potential is identified in the central and northern parts of the basin,reaching up to 9.5×10^(6)t/km^(2)at the P50 probability level.In contrast,the hinterland,eastern,and western parts of the basin generally exhibit storage potential of below 1.0×10^(6)t/km^(2)at the same probability level.The CGs has also characterized historical CO_(2)plume migration in reservoirs at the storage site of the Shenhua CCS demonstration project and conducted numerical simulations of CO_(2)plume migration for periods of 10 and 20 years following the shutdown of the injection well.The CGS implemented a kiloton-scale pilot test on CO_(2)-enhanced water recovery(CO_(2)-EWR)in eastern Junggar,revealing that CO_(2)flooding can improve the pressure for fluid production,with the highest ratio of CO_(2)to produced fluids estimated at approximately 1.2.Besides,an observation field for natural CO_(2)leakage,covering about 930 m^(2),was built in Qinghai Province.In natural CO_(2)fields or at artificial CO_(2)injection research sites,cO_(2)leakage points are primarily related to the distribution of faults(especially fault crossing),which can serve as pathways for CO_(2)leakage.The observation field provides a natural analog to wellbore failure and offers an opportunity to further monitor CO_(2)geological storage sites.However,it has been inferred that borehole ZK10 at the observation field has become a leakage pathway due to the drilling activities,inadequate well-plugging,and abandonment procedures without considering CO_(2)corrosion.
基金the support of NVIDIA Corporation with the donation of the Titan Xp GPU used for this researchsupported by EPSRC grant EP/R002495/1the European Metrology Research Programme through grant 17IND08。
文摘Composite materials are increasingly used in the aerospace industry.To fully realise the weight saving potential along with superior mechanical properties that composites offer in safety critical applications,reliable Non-Destructive Testing(NDT)methods are required to prevent catastrophic failures.This paper will review the state of the art in the field and point to highlight the success and challenges that different NDT methods are faced to evaluate the integrity of critical aerospace composites.The focus will be on advanced certificated NDT methods for damage detection and characterization in composite laminates for use in the aircraft primary and secondary structures.
基金supported by the Implementation Programs for Marine Renewable Energy Special Funds (GHME2012ZC02)
文摘Actual sea condition testing and inspection and evaluation method research are carried out for tidal energy devices to provide scientific and effective technical support for the ocean high-tech achievement transformation and marine renewable energy development. By analyzing three core indicators, including the power output characteristics of the tidal current device, the generating capacity, energy conversion efficiency, proposed the test contents and evaluation methods of indicators are proposed in this paper; and based on the research of wind farms, power quality testing and assessment methods of offshore tidal energy device are proposed; given the security access to the test contents of tidal current energy device, tidal current energy device running conditions in the testing ground are comprehensively assessed.
文摘The early involvement of test and evaluation can significantly reduce the cost of modifying issues and errors found in the later stages of aircraft development and design process.This paper presents a methodology for aircraft mission effectiveness evaluation and design space exploration based on Virtual Operational Test(VOT),incorporating Virtual Open Scenario(VOS)and User in Scenarios(UIS)concepts.By employing modeling and simulation technologies in the early stages of aircraft development and design,a virtual environment can be constructed,allowing aircraft users to participate more closely and conveniently in the design process.Virtual tests conducted by users within the mission context provide data on mission effectiveness and critical user feedback.This paper outlines the main components of the virtual operational test process and related conceptual methods,and discusses an open support system framework that supports VOT.The effectiveness and adaptability of the method are demonstrated through two case studies:a beyond-visual-range air combat scenario and a helicopter ground attack scenario.These case studies demonstrate the evaluation of aircraft mission effectiveness and the sensitivity analysis and optimization of design and operational parameters based on VOT.
文摘In recent years, advanced composite structures are used extensively in many industries such as aerospace, aircraft, automobile, pipeline and civil engineering. Reliability and safety are crucial requirements posed by them to the advanced composite structures be- cause of their harsh working conditions. Therefore, as a very important measure, structural health monitoring （SHM） in-service is deft- nitely demanded for ensuring their safe working in-situ. In this paper, fiber Bragg grating （FBG） sensors are surface-mounted on the hoop and in the axial directions of a FRP pressure vessel to monitor the strain status during its pressurization. The experimental results show that the FBG sensors could be used to monitor the strain development and determine the ultimate failure strain of the composite pressure vessel.
文摘As the increasing popularity and complexity of Web applications and the emergence of their new characteristics, the testing and maintenance of large, complex Web applications are becoming more complex and difficult. Web applications generally contain lots of pages and are used by enormous users. Statistical testing is an effective way of ensuring their quality. Web usage can be accurately described by Markov chain which has been proved to be an ideal model for software statistical testing. The results of unit testing can be utilized in the latter stages, which is an important strategy for bottom-to-top integration testing, and the other improvement of extended Markov chain model (EMM) is to present the error type vector which is treated as a part of page node. this paper also proposes the algorithm for generating test cases of usage paths. Finally, optional usage reliability evaluation methods and an incremental usability regression testing model for testing and evaluation are presented. Key words statistical testing - evaluation for Web usability - extended Markov chain model (EMM) - Web log mining - reliability evaluation CLC number TP311. 5 Foundation item: Supported by the National Defence Research Project (No. 41315. 9. 2) and National Science and Technology Plan (2001BA102A04-02-03)Biography: MAO Cheng-ying (1978-), male, Ph.D. candidate, research direction: software testing. Research direction: advanced database system, software testing, component technology and data mining.
基金S.-L.Chen acknowledges funding from the National Natural Science Foundation of China,No.61775134C.Tian acknowledges funding from the National Natural Science Foundation of China,No.61705216the Anhui Science and Technology Department,No.18030801138.
文摘Photoacoustic(PA)imaging has been widely used in biomedical research and preclinical studies during the past two decades.It has also been explored for nondestructive testing and evaluation(NDT/E)and for industrial applications.This paper describes the basic principles of PA technology for NDT/E and its applications in recent years.PA technology for NDT/E includes the use of a modulated continuous-wave laser and a pulsed laser for PA wave excitation,PA-generated ultrasonic waves,and all-optical PA wave excitation and detection.PA technology for NDT/E has demonstrated broad applications,including the imaging of railway cracks and defects,the imaging of Li metal batteries,the measurements of the porosity and Young’s modulus,the detection of defects and damage in silicon wafers,and a visualization of underdrawings in paintings.
文摘Following publication of the original article[1],the authors identified an error in the article title.The first word ‘Review’ is added mistakenly by the typesetter.
基金National Key Research and Development Project of China(No.2018YFB1701200)。
文摘Aiming at the problems of low reliability and complex operation of traditional coin-tap test of composite material,this paper introduces the grey system theory and achieves better performance.The response signals of coin-tap are classified through the grey clustering based on relation analysis,and corresponding improvements are made to the calculation method of the relation degree of nearness.First,the time history of acceleration is taken as the system behavior sequence.The improved correlation calculation method is used to solve the relation degree of nearness between the sequences,and the matrix of degree of grey relation is constructed based on this.Then,the sequence groups are summarized through the matrix,and the response signals of coin-tap are qualitatively classified according to the location of the reference sequence.Finally,the defect detection of composite materials is completed without pre-testing.The test results show that the accuracy of the coin-tap test based on improved grey clustering reaches 100%,which simplifies the operation steps while ensuring the reliability of the coin-tap test results.
文摘Non-destructive testing (NDT) of structures is one of the most important tasksof the proper maintenance and diagnosis of machines and constructions structuralcondition. NDT methods contribute to the damage tolerance philosophy used in theaircraft design methodology as well as many other operation and maintenance programsof machinery and constructions. The following study is focusing on overviewing animportant group of NDT methods: the optical and other ones, which found broadapplicability in scientific and industrial studies nowadays. The paper discusses theselected most widely applicable methods, namely, visual testing, ultrasonic testing,radiographic testing, infrared thermography as well as electronic speckle patterninterferometry and shearographic testing. Besides the basic principles of testing usingthese methods, their potential applications in various industrial and technologicalbranches are broadly discussed. The analysis as categorization of the NDT methodsprovided in this paper may help in selection of such methods in diagnosis of varioustypes of structures and defects and damage occurring in these structures.
基金supported by the Center for Innovative Grouting Materials and Technology (CIGMAT) at the University of Houston, Texas, USA
文摘The characterization of ultra-soft clayey soil exhibits extreme challenges due to low shear strength of such material.Hence,inspecting the non-destructive electrical impedance behavior of untreated and treated ultra-soft clayey soils gains more attention.Both shear strength and electrical impedance were measured experimentally for both untreated and treated ultra-soft clayey soils.The shear strength of untreated ultra-soft clayey soil reached 0.17 kPa for 10% bentonite content,while the shear strengths increased to 0.27 kPa and 6.7 kPa for 10% bentonite content treated with 2% lime and 10% polymer,respectively.The electrical impedance of the ultra-soft clayey soil has shown a significant decrease from 1.6 kΩ to 0.607 kΩ when the bentonite content increased from 2% to 10% at a frequency of 300 kHz.The10%lime and 10% polymer treatments have decreased the electrical impedances of ultra-soft clayey soil with 10%bentonite from 0.607 kΩ to 0.12 kΩ and 0.176 kΩ,respectively,at a frequency of 300 kHz.A new mathematical model has been accordingly proposed to model the non-destructive electrical impedancefrequency relationship for both untreated and treated ultra-soft clayey soils.The new model has shown a good agreement with experimental data with coefficient of determination（R;）up to 0.99 and root mean square error（RMSE） of 0.007 kΩ.
基金supported by the Cooperative Innovation Center of Terahertz Science , the National Basic Research Program of China (Grant No. 2014CB339800)the National Natural Science Foundation of China (Grant Nos. 61138001, 61420106006)+1 种基金the Program for Changjiang Scholars and Innovative Research Team in University (grant No. IRT13033)the Major National Development Project of Scientific Instruments and Equipment of China (Grant No. 2011YQ150021)
文摘Optoelectronic terahertz generation and detection play a key role in the applications of non-destructive testing,which involves different areas such as physics,biological,material science,imaging,explosions detection,astronomy applications,semiconductor technology and superconductiong electronics. In this article,we present a reviewof the principle and performance of typical terahertz sources,detectors and non-destructive testing applications. On this basis,the newdevelopment and trends of terahertz radiation detectors are also discussed.
