The interfacial properties of Schottky contacts crucially affect the performance of power devices. While a few studies have explored the impact of fluorine on Schottky contacts, a comprehensive theoretical explanation...The interfacial properties of Schottky contacts crucially affect the performance of power devices. While a few studies have explored the impact of fluorine on Schottky contacts, a comprehensive theoretical explanation supported by experimental evidence remains lacking. This work investigates the effects of fluorine incorporation and electrothermal annealing(ETA) on the current transport process at Ni/β-Ga_(2)O_(3) Schottky contacts. X-ray photoelectron spectroscopy and first-principles calculations confirm the presence of fluorine substitutions for oxygen and oxygen vacancies and their lowering effect on the Schottky barrier heights. Additionally, accurate electrothermal hybrid TCAD simulations validates the extremely short-duration high temperatures(683 K) induced by ETA, which facilitates lattice rearrangement and reduces interface trap states. The interface trap states are quantitatively resolved through frequency-dependent conductance technique, showing the trap density(DT)reduction from(0.88-2.48) × 10^(11) cm^(-2)·eV^(-1) to(0.46-2.09) × 10^(11) cm^(-2)·eV^(-1). This investigation offers critical insights into the β-Ga_(2)O_(3) contacts with the collaborative treatment and solids the promotion of high-performance β-Ga_(2)O_(3) power devices.展开更多
This study develops a contact performance-driven method for skiving face gear drives using a single cutter,eliminating the traditional need for separate cutters to reduce production costs and time.First,the mathematic...This study develops a contact performance-driven method for skiving face gear drives using a single cutter,eliminating the traditional need for separate cutters to reduce production costs and time.First,the mathematical models of the tooth flanks for the face gear drives are established based on the gear skiving processes.Then,load tooth contact analysis(LTCA)model is established to calculate the contact performance data.Next,a two-stage optimization model is employed to determine the optimal parameters of the cutting edge with improved contact performances.The effectiveness of this method is validated through simulations and rolling tests.Compared with the traditional method,the proposed method can machine both the face gear and its mating pinion with a single cutter.Simulation results show that the proposed method avoids tooth surface edge contact,with the maximum tooth surface contact stress reduced by 31.7%,the contact ratio decreases by 21.5%,and the transmission error increases by 22.3%.Rolling tests verify the consistency of tooth surface contact patterns between simulations and experiments.The proposed method provides a reference for the cutting edge design of skiving cutters for face gear pairs.展开更多
MXene-based smart contact lenses demonstrate a cutting-edge advancement in wearable ophthalmic technology,combining real-time biosensing,therapeutic capabilities,and user comfort in a single platform.These devices tak...MXene-based smart contact lenses demonstrate a cutting-edge advancement in wearable ophthalmic technology,combining real-time biosensing,therapeutic capabilities,and user comfort in a single platform.These devices take the advantage of the exceptional electrical conductivity,mechanical flexibility,and biocompatibility of two-dimensional MXenes to enable noninvasive,tear-based monitoring of key physiological markers such as intraocular pressure and glucose levels.Recent developments focus on the integration of transparent MXene films into the conventional lens materials,allowing multifunctional performance including photothermal therapy,antimicrobial and anti-inflammation protection,and dehydration resistance.These innovations offer promising strategies for ocular disease management and eye protection.In addition to their multifunctionality,improvements in MXene synthesis and device engineering have enhanced the stability,transparency,and wearability of these lenses.Despite these advances,challenges remain in long-term biostability,scalable production,and integration with wireless communication systems.This review summarizes the current progress,key challenges,and future directions of MXene-based smart contact lenses,highlighting their transformative potential in next-generation digital healthcare and ophthalmic care.展开更多
The cold chain environment is an important route for the long⁃distance transmission of pathogenic micro⁃organisms.In this study,we explored the mechanisms of secondary propagation through surface contact on cold surfa...The cold chain environment is an important route for the long⁃distance transmission of pathogenic micro⁃organisms.In this study,we explored the mechanisms of secondary propagation through surface contact on cold surfaces.A quantitative statistical experimental method was adopted to study the surface⁃contact transmission of micro⁃organisms,wherein the transfer rate of surface contact was the dependent variable and Escherichia coli was used as the indicator bacterium.The effects of contact pressure(0.44,0.86,1.55,2.25,and 2.94 N/cm^(2)),contact time(0,15,30,45,and 60 s),contact angle(15°and 25°),and surface materials(rubber and cotton gloves)were measured at two storage temperatures:cold storage(5℃)and freezing(-18℃).The results showed that as temperature decreases,the transfer of micro⁃organisms through surface contact becomes less probable.The contact time did not significantly influence the transfer rate of micro⁃organisms when items were handled at cold⁃storage temperatures.Based on these results,we recommend placing items as flat as possible to minimize the tilt angle when handling them at cold⁃storage temperatures.Additionally,if the tilt angle cannot be avoided,rubber gloves should be used when handling items stored at large tilt angles,whereas cotton gloves may be used for items placed at smaller angles.展开更多
This paper quantitatively discusses the influence of well contact on single-event transient(SET)in sub-20 nm FinFET by two-photon absorption(TPA)pulse laser.Two groups of inverter chains were designed to investigate t...This paper quantitatively discusses the influence of well contact on single-event transient(SET)in sub-20 nm FinFET by two-photon absorption(TPA)pulse laser.Two groups of inverter chains were designed to investigate the impact of well contact distance on the FinFET process.The experimental results show that the SET pulse width has a bimodal symmetric distribution,which is different from that of a bulk planar CMOS device.To investigate the detailed mechanism of the phenomenon,a high-precision FinFET TCAD model was established,in which both Id-Vd and Id-Vg errors were less than 10%compared to the SPICE model provided by the commercial process.TCAD simulation under heavy ion injection showed the mechanism of the abnormal phenomenon,where the well contact plays a major role in charge collection at the near-well contact distance,while the source plays a major role at the far distance.This phenomenon is completely different from that of planar CMOS devices.This indicates that the SET mechanism becomes more complicated during the FinFET process.Therefore,more effective SET hardening methods should be investigated for FinFET.展开更多
The self-assembled monolayer(SAM),functioning as a hole transport layer,holds the potential to substantially elevate the efficiency of perovskite and organic solar cells.Nevertheless,incomplete SAM coverage may result...The self-assembled monolayer(SAM),functioning as a hole transport layer,holds the potential to substantially elevate the efficiency of perovskite and organic solar cells.Nevertheless,incomplete SAM coverage may result in interface defects lurking between the photovoltaic layer and the electrode,thereby causing non-radiative recombination losses of interfacial charges.To tackle this issue,we introduced 4-bromobutyric acid to co-assemble with the SAM,yielding a more compact co-assembled monolayer(co-SAM)that effectively repairs these defective zones.Confocal laser scanning microscopy and Kelvin Probe Force Microscopy show that co-SAMs successfully mitigate interface defects in the previously uncovered electrode regions.Furthermore,the work function of the electrodes is elevated to 5.6 eV,facilitating efficient hole extraction.Consequently,devices incorporating co-SAMs exhibit notably reduced non-radiative recombination losses.The power conversion efficiency(PCE)of the devices is enhanced to 20.0% in binary organic solar cells,and an even more remarkable breakthrough PCE of 25.8% is achieved in perovskite/organic tandem devices.This study introduces a straightforward strategy to improve the hole-selective contact of electrodes,ultimately boosting the overall efficiency of the devices.展开更多
Polar two-dimensional(2D)perovskites with their excellent semiconductor properties,intrinsic anisotropy,and bulk photovoltaic effect,have emerged as promising candidates for Self-driven polarization-sensitive photodet...Polar two-dimensional(2D)perovskites with their excellent semiconductor properties,intrinsic anisotropy,and bulk photovoltaic effect,have emerged as promising candidates for Self-driven polarization-sensitive photodetectors.However,these self-driven polarized detectors typically require fabrication along the spontaneous polarization direction to maintain the device’s operation in the self-driven mode,which imposes additional limitations.Herein,we demonstrate multidirectional self-driven polarization-sensitive photodetection by constructing 2D perovskite-based asymmetric contact devices,Ag/2D perovskite/C.The built-in electric field,originating from the difference in work functions,acts as the driving force for the separation and transport of photogenerated carriers.Notably,this approach does not necessitate a specific direction,thereby enabling multidirectional self-driven photodetection.Under excitation by linearly polarized light,our devices exhibit impressive polarization-sensitive discrimination in multiple directions,achieving polarization ratios of 3.3 and 3.1 along the a and baxes,respectively.Our work enriches the approaches enabling self-driven polarization-sensitive photodetection,free from the previous limitations.展开更多
This study explores the dynamic contact response of a viscoelastic functionally graded material(FGM)-coated half-plane under a rigid flat punch subjected to a time-harmonic vertical force.The elastic modulus and mass ...This study explores the dynamic contact response of a viscoelastic functionally graded material(FGM)-coated half-plane under a rigid flat punch subjected to a time-harmonic vertical force.The elastic modulus and mass density of the FGM coating vary exponentially along the thickness direction.The FGM coating and the homogeneous half-plane possess viscoelastic properties,which are described by a linearly hysteretic damping model.By applying the asymptotic method and the Fourier integral transform technique,the contact problem is converted into a Cauchy singular integral equation.The effects of excitation frequency,gradient index,damping factor ratio,and punch width on the vertical impedance and dynamic contact stress are analyzed.The results indicate that adjusting the gradient index of the FGM coating can significantly affect the contact stress and vertical impedance.展开更多
In rock engineering,natural cracks in rock masses subjected to external loads tend to initiate and propagate,leading to potential safety hazards.To investigate the effect of cracking behavior on the mechanical propert...In rock engineering,natural cracks in rock masses subjected to external loads tend to initiate and propagate,leading to potential safety hazards.To investigate the effect of cracking behavior on the mechanical properties of rocks,the cracking processes of pre-cracked rocks have been extensively studied using numerical modeling methods.The peridynamics(PD)exhibits advantages over other numerical methods due to the absence of the requirements for remeshing and external crack growth criterion.However,for modeling pre-cracked rock cracking processes under impact,current PD implementations lack generally applicable rock constitutive models and impact contact models,which leads to difficulties in determining rock material parameters and efficiently calculating impact loads.This paper proposes a non-ordinary state-based peridynamics(NOSBPD)modeling method integrating the Drucker-Prager(DP)plasticity model and an efficient contact model to address the above problems.In the proposed method,the Drucker-Prager plasticity model is integrated into the NOSBPD,thereby equipping NOSBPD with the capability to accurately characterize the nonlinear stress-strain relationship inherent in rocks.An efficient contact model between particles and meshes is designed to calculate the impact loads,which is essentially a coupling method of PD with the finite element method(FEM).The effectiveness of the proposed NOSBPD modeling method is verified by comparison with other numerical methods and experiments.Experimental results indicate that the proposed method can effectively and accurately predict the 3D cracking processes of pre-cracked cracks under impact loading,and the maximum principal stress is the key driver behind wing crack formation in pre-cracked rocks.展开更多
Considering the tunneling effect and the Schottky effect,the metal semiconductor contact is simulated by using self consistent ensemble Monte Carlo method.Under different biases or at different barrier heights,the i...Considering the tunneling effect and the Schottky effect,the metal semiconductor contact is simulated by using self consistent ensemble Monte Carlo method.Under different biases or at different barrier heights,the investigation into the tunneling current indicates that the tunneling effect is of great importance under reverse biases.The Schottky barrier diode current due to Schottky effect is in agreement with the theoretical one.The barrier lowering is found a profound effect on the current transport at the metal semiconductor interface.展开更多
N-wells are created by P＋ ion implantation into Si-faced p-type 4H-SiC epilayer. Ti and Ni are deposited in sequence on the surface of the active regions. Ni2Si is identified as the dominant phase by X-ray diffracti...N-wells are created by P＋ ion implantation into Si-faced p-type 4H-SiC epilayer. Ti and Ni are deposited in sequence on the surface of the active regions. Ni2Si is identified as the dominant phase by X-ray diffraction （XRD） analysis after metallization annealing. An amorphous C film at the Ni2 Si/SiC interface is confirmed by an X-ray energy-dispersive spectrometer （XEDS）. The Ni2Si and amorphous C film are etched away selectively,followed by deposition of new metal films without annealing. Measurement of the current-voltage characteristics shows that the contacts are still ohmic after the Ni2 Si and amorphous C film are replaced by new metal films. The sheet resistance Rsh of the implanted layers decreases from 975 to 438f2/D, because carbon vacancies （Vc） appeared during annealing,which act as donors for electrons in SiC.展开更多
Polysilicon ohmic contacts to n-type 4H-SiC have been fabricated. TLM （transfer length method） test patterns with polysilicon structure are formed on n-wells created by phosphorus ion （P^＋） implantation into a Si...Polysilicon ohmic contacts to n-type 4H-SiC have been fabricated. TLM （transfer length method） test patterns with polysilicon structure are formed on n-wells created by phosphorus ion （P^＋） implantation into a Si-faced p-type 4H-SiC epilayer. The polysilicon is deposited using low-pressure chemical vapor deposition （LPCVD） and doped by phosphorous ions implantation followed by diffusion to obtain a sheet resistance of 22Ω/□. The specific contact resistance pc of n^＋ polysilicon contact to n-type 4H-SiC as low as 3.82 × 10^-5Ω· cm^2 is achieved. The result for sheet resistance Rsh of the phosphorous ion implanted layers in SiC is about 4.9kΩ/□. The mechanisms for n^＋ polysilicon ohmic contact to n-type SiC are discussed.展开更多
Arc erosion studies are conducted on AgSnO2 contact materials at different stages in the break operation. A resistive load arrangement is used with up to 42 V DC at 24 A and a constant contact opening velocity. The ar...Arc erosion studies are conducted on AgSnO2 contact materials at different stages in the break operation. A resistive load arrangement is used with up to 42 V DC at 24 A and a constant contact opening velocity. The arc current is terminated at different stages as the arc is drawn between the contacts enabling a study of the arcing phenomena up to that point. Surface profiling of the contacts is conducted to determine the extent of erosion at the different stages as the arc is drawn. Spectral analysis is also conducted on the arc and then related to the extent of erosion. The results show that particular features occur at different stages as the arc is drawn. As the arc is initially established, it goes through an ＂Arc Generation＂ regime where the arc roots are small and immobile on both the anode and the cathode. Material transfer occurs mainly from anode to cathode. The spectral analysis indicates that Sn and O species dominate the arc followed by the Ag species. As the arc is drawn further and enters the ＂Arc Degeneration＂ regime, the anode undergoes significantly larger erosion than the cathode. Also, both contacts indicate that multiple arc roots have formed, which are highly mobile in the later stages of the discharge. The spectral analysis indicates that Ag and N species are in high concentrations compared to other species. The mechanisms of erosion and deposition are discussed in relation to the species within the arc discharge. For the complete break operation, it is found that the anode undergoes major erosion, and it is thought that the gaseous ions species do not dominate the arc under these conditions of short arcs and voltage 〈42 V to cause cathode erosion.展开更多
A uniform transient temperature field model of electrical contacts operation was found by analyzing the process of closing arc constriction resistance Joule heat ~ breaking arc. Essential parameters of Ag/La2NiO4 elec...A uniform transient temperature field model of electrical contacts operation was found by analyzing the process of closing arc constriction resistance Joule heat ~ breaking arc. Essential parameters of Ag/La2NiO4 electrical contact material for transient temperature field calculation were obtained through tests of electrical contact experimental instrument under 18 V DC in different cur- rents, other correlation experiments, and calculation anal- ysis. The finite element method was applied to solve the transient temperature field, and the features and distribution of the transient temperature field were obtained. The condition of material erosion and mass transfer can be forecasted by those calculation results. It is beneficial to research about the lifetime of Ag/La2NiO4 electrical material.展开更多
The Ti-Al ohmic contact to n-type 6H-SiC has been fabricated. An array of TLM （transfer length method） test patterns with Au/Ti/A1/Ti/SiC structure is formed on N-wells created by P^＋ ion implantation into Si-faced...The Ti-Al ohmic contact to n-type 6H-SiC has been fabricated. An array of TLM （transfer length method） test patterns with Au/Ti/A1/Ti/SiC structure is formed on N-wells created by P^＋ ion implantation into Si-faced p-type 6H-SiC epilayer. The specific contact resistance pc as low as 8.64×10-6Ω·cm^2 is achieved after annealing in N2 at 900℃ for 5min. The sheet resistance Rsh of the implanted layers is 975Ω. X-ray diffraction （XRD） analysis shows the formation of Ti3SiC2 at the metal/n-SiC interface after thermal annealing, which is responsible for the low resistance contact.展开更多
Nanoscale sliding contacts of smooth surfaces or between a single asperity and a smooth surface have been widely investigated by molecular dynamics simulations, while there are few studies on the sliding contacts betw...Nanoscale sliding contacts of smooth surfaces or between a single asperity and a smooth surface have been widely investigated by molecular dynamics simulations, while there are few studies on the sliding contacts between two rough surfaces. Actually, the friction of two rough surfaces considering interactions between more asperities should be more realistic. By using multiscale method, friction characteristics of two dimensional nanoscale sliding contacts between rigid multi-asperity tips and elastic textured surfaces are investigated. Four nanoscale textured surfaces with different texture shapes are designed, and six multi-asperity tips composed of cylindrical asperities with different radii are used to slide on the textured surfaces. Friction forces are compared for different tips, and effects of the asperity radii on the friction characteristics are investigated. Average friction forces for all the cases are listed and compared, and effects of texture shapes of the textured surfaces are discussed. The results show that textured surface II has a better structure to reduce friction forces. The multi-asperity tips composed of asperities with R=20r0 （r0=0.227 7 nm） or R=30r0 get higher friction forces compared with other cases, and more atoms of the textured surfaces are taken away by these two tips, which are harmful to reduce friction or wear. For the case of R=10ro, friction forces are also high due to large contact areas, but the sliding processes are stable and few atoms are taken away by the tip. The proposed research considers interactions between more asperities to make the model approach to the real sliding contact problems. The results will help to vary or even control friction characteristics by textured surfaces, or provide references to the design of textured surfaces.展开更多
Specific contact resistance to p-GaN was measured for various structures of Ni/Pd-based metals and thin(20-30 nm thick)p-InGaN/p^(+)-GaN contacting layers.The effects of surface chemical treatment and annealing temper...Specific contact resistance to p-GaN was measured for various structures of Ni/Pd-based metals and thin(20-30 nm thick)p-InGaN/p^(+)-GaN contacting layers.The effects of surface chemical treatment and annealing temperature were ex-amined.The optimal annealing temperature was determined to be 550°C,above which the sheet resistance of the samples de-graded considerably,suggesting that undesirable alloying had occurred.Pd-containing metal showed~35%lower com-pared to that of single Ni.Very thin(2-3.5 nm thick)p-InGaN contacting layers grown on 20-25 nm thick p^(+)-GaN layers exhib-ited one to two orders of magnitude smaller values of compared to that of p^(+)-GaN without p-InGaN.The current density de-pendence of,which is indicative of nonlinearity in current-voltage relation,was also examined.The lowest achieved through this study was 4.9×10^(-5)Ω·cm^(2)@J=3.4 kA/cm^(2).展开更多
We investigate the contact characteristics of bi-layer thin films, Ti（20nm）/Al（200nm） on Si-doped n-type A10.6 Ga0.4 N films grown on sapphire substrate. The surface treatment was aqua regia boiling before metalli...We investigate the contact characteristics of bi-layer thin films, Ti（20nm）/Al（200nm） on Si-doped n-type A10.6 Ga0.4 N films grown on sapphire substrate. The surface treatment was aqua regia boiling before metallization and annealing after metallization at different conditions in N2 ambient. High resolution X-ray diffractometery analysis was carried out on the contacts and the surface interfaces of these conditions were compared. A specific contact resistivity pc was determined using the circular transmission line method via current-voltage measurements. A pc of 3.42 × 10^-4 Ω·cm^2 was achieved when annealed at 670℃ for 90s. Then, this ideal ohmic contact was used in back-illuminated solar-blind AlGaN p- i-n detectors and the detectors＇ performances, such as spectral responsivity, dark-current,and breakdown voltage were optimized.展开更多
There are two separate traditional approaches to model contact problems: continuum and atomistic theory. Continuum theory is successfully used in many domains, but when the scale of the model comes to nanometer, conti...There are two separate traditional approaches to model contact problems: continuum and atomistic theory. Continuum theory is successfully used in many domains, but when the scale of the model comes to nanometer, continuum approximation meets challenges. Atomistic theory can catch the detailed behaviors of an individual atom by using molecular dynamics (MD) or quantum mechanics, although accurately, it is usually time-consuming. A multiscale method coupled MD and finite element (FE) is presented. To mesh the FE region automatically, an adaptive method based on the strain energy gradient is introduced to the multiscale method to constitute an adaptive multiscale method. Utilizing the proposed method, adhesive contacts between a rigid cylinder and an elastic substrate are studied, and the results are compared with full MD simulations. The process of FE meshes refinement shows that adaptive multiscale method can make FE mesh generation more flexible. Comparison of the displacements of boundary atoms in the overlap region with the results from full MD simulations indicates that adaptive multiscale method can transfer displacements effectively. Displacements of atoms and FE nodes on the center line of the multiscale model agree well with that of atoms in full MD simulations, which shows the continuity in the overlap region. Furthermore, the Von Mises stress contours and contact force distributions in the contact region are almost same as full MD simulations. The method presented combines multiscale method and adaptive technique, and can provide a more effective way to multiscale method and to the investigation on nanoscale contact problems.展开更多
We report the first attempt to model the contacts of an ionic polymer metal composite（IPMC） based tactile sensor. The tactile sensor comprises an IPMC actuator, an IPMC sensor and the target to be detected. The syst...We report the first attempt to model the contacts of an ionic polymer metal composite（IPMC） based tactile sensor. The tactile sensor comprises an IPMC actuator, an IPMC sensor and the target to be detected. The system makes use of multiple contacts to work： the actuator comes into contact with the sensor and pushes the movement of sensor; the contact between the sensor and the object detects the existence and the stiffness of the target. We integrate modeling of various physical processes involved in IPMC devices to form a simulation scheme. An iteration and optimization strategy is also described to correlate the experimental and simulation results of an IPMC bending actuator to identify the two key parameters used in electromechanical transduction. Modeling the multiple contacts will aid the design and optimization of such IPMC based soft robotics.展开更多
基金supported by the National Natural Science Foundation of China (Grant Nos. 62174019, 52302046, L2424216)the Guangdong Basic and Applied Basic Research Foundation (Grant No. 2024A1515012139)+2 种基金the Major Program (JD) of Hubei Province (Grant No. 2023BAA009)the Knowledge Innovation Program of Wuhan-Shuguang Project (Grant No. 2023010201020262)the Basic Research Program of Jiangsu (Grant No. BK20230268)。
文摘The interfacial properties of Schottky contacts crucially affect the performance of power devices. While a few studies have explored the impact of fluorine on Schottky contacts, a comprehensive theoretical explanation supported by experimental evidence remains lacking. This work investigates the effects of fluorine incorporation and electrothermal annealing(ETA) on the current transport process at Ni/β-Ga_(2)O_(3) Schottky contacts. X-ray photoelectron spectroscopy and first-principles calculations confirm the presence of fluorine substitutions for oxygen and oxygen vacancies and their lowering effect on the Schottky barrier heights. Additionally, accurate electrothermal hybrid TCAD simulations validates the extremely short-duration high temperatures(683 K) induced by ETA, which facilitates lattice rearrangement and reduces interface trap states. The interface trap states are quantitatively resolved through frequency-dependent conductance technique, showing the trap density(DT)reduction from(0.88-2.48) × 10^(11) cm^(-2)·eV^(-1) to(0.46-2.09) × 10^(11) cm^(-2)·eV^(-1). This investigation offers critical insights into the β-Ga_(2)O_(3) contacts with the collaborative treatment and solids the promotion of high-performance β-Ga_(2)O_(3) power devices.
基金Project(2024YFB3410402)supported by the National Key R&D Program of ChinaProject(52075558)supported by the National Natural Science Foundation of China+2 种基金Project(2021RC3012)supported by the Science and Technology Innovation Program of Hunan Province,ChinaProject(2023CXQD050)supported by the Central South University Innovation-Driven Research Program,ChinaProject(CX20230255)supported by the Fundamental Research Funds for the Central Universities,China。
文摘This study develops a contact performance-driven method for skiving face gear drives using a single cutter,eliminating the traditional need for separate cutters to reduce production costs and time.First,the mathematical models of the tooth flanks for the face gear drives are established based on the gear skiving processes.Then,load tooth contact analysis(LTCA)model is established to calculate the contact performance data.Next,a two-stage optimization model is employed to determine the optimal parameters of the cutting edge with improved contact performances.The effectiveness of this method is validated through simulations and rolling tests.Compared with the traditional method,the proposed method can machine both the face gear and its mating pinion with a single cutter.Simulation results show that the proposed method avoids tooth surface edge contact,with the maximum tooth surface contact stress reduced by 31.7%,the contact ratio decreases by 21.5%,and the transmission error increases by 22.3%.Rolling tests verify the consistency of tooth surface contact patterns between simulations and experiments.The proposed method provides a reference for the cutting edge design of skiving cutters for face gear pairs.
文摘MXene-based smart contact lenses demonstrate a cutting-edge advancement in wearable ophthalmic technology,combining real-time biosensing,therapeutic capabilities,and user comfort in a single platform.These devices take the advantage of the exceptional electrical conductivity,mechanical flexibility,and biocompatibility of two-dimensional MXenes to enable noninvasive,tear-based monitoring of key physiological markers such as intraocular pressure and glucose levels.Recent developments focus on the integration of transparent MXene films into the conventional lens materials,allowing multifunctional performance including photothermal therapy,antimicrobial and anti-inflammation protection,and dehydration resistance.These innovations offer promising strategies for ocular disease management and eye protection.In addition to their multifunctionality,improvements in MXene synthesis and device engineering have enhanced the stability,transparency,and wearability of these lenses.Despite these advances,challenges remain in long-term biostability,scalable production,and integration with wireless communication systems.This review summarizes the current progress,key challenges,and future directions of MXene-based smart contact lenses,highlighting their transformative potential in next-generation digital healthcare and ophthalmic care.
基金National Natural Science Foundation of China(Grant No.52278121).
文摘The cold chain environment is an important route for the long⁃distance transmission of pathogenic micro⁃organisms.In this study,we explored the mechanisms of secondary propagation through surface contact on cold surfaces.A quantitative statistical experimental method was adopted to study the surface⁃contact transmission of micro⁃organisms,wherein the transfer rate of surface contact was the dependent variable and Escherichia coli was used as the indicator bacterium.The effects of contact pressure(0.44,0.86,1.55,2.25,and 2.94 N/cm^(2)),contact time(0,15,30,45,and 60 s),contact angle(15°and 25°),and surface materials(rubber and cotton gloves)were measured at two storage temperatures:cold storage(5℃)and freezing(-18℃).The results showed that as temperature decreases,the transfer of micro⁃organisms through surface contact becomes less probable.The contact time did not significantly influence the transfer rate of micro⁃organisms when items were handled at cold⁃storage temperatures.Based on these results,we recommend placing items as flat as possible to minimize the tilt angle when handling them at cold⁃storage temperatures.Additionally,if the tilt angle cannot be avoided,rubber gloves should be used when handling items stored at large tilt angles,whereas cotton gloves may be used for items placed at smaller angles.
基金supported by Natural Science Foundation of China(Nos.62174180 and 62304258)National Key R&D Program of China(No.2023YFA1609000)。
文摘This paper quantitatively discusses the influence of well contact on single-event transient(SET)in sub-20 nm FinFET by two-photon absorption(TPA)pulse laser.Two groups of inverter chains were designed to investigate the impact of well contact distance on the FinFET process.The experimental results show that the SET pulse width has a bimodal symmetric distribution,which is different from that of a bulk planar CMOS device.To investigate the detailed mechanism of the phenomenon,a high-precision FinFET TCAD model was established,in which both Id-Vd and Id-Vg errors were less than 10%compared to the SPICE model provided by the commercial process.TCAD simulation under heavy ion injection showed the mechanism of the abnormal phenomenon,where the well contact plays a major role in charge collection at the near-well contact distance,while the source plays a major role at the far distance.This phenomenon is completely different from that of planar CMOS devices.This indicates that the SET mechanism becomes more complicated during the FinFET process.Therefore,more effective SET hardening methods should be investigated for FinFET.
基金supported by the National Natural Science Foundation of China(52303239,51933001,22475114)the Natural Science Foundation of Shandong Province(ZR2022QB141,2023HWYQ-087)+1 种基金the Shanghai Pujiang Program(23PJ1409700)the Hubei Province Key Research Program(2023BAB109)。
文摘The self-assembled monolayer(SAM),functioning as a hole transport layer,holds the potential to substantially elevate the efficiency of perovskite and organic solar cells.Nevertheless,incomplete SAM coverage may result in interface defects lurking between the photovoltaic layer and the electrode,thereby causing non-radiative recombination losses of interfacial charges.To tackle this issue,we introduced 4-bromobutyric acid to co-assemble with the SAM,yielding a more compact co-assembled monolayer(co-SAM)that effectively repairs these defective zones.Confocal laser scanning microscopy and Kelvin Probe Force Microscopy show that co-SAMs successfully mitigate interface defects in the previously uncovered electrode regions.Furthermore,the work function of the electrodes is elevated to 5.6 eV,facilitating efficient hole extraction.Consequently,devices incorporating co-SAMs exhibit notably reduced non-radiative recombination losses.The power conversion efficiency(PCE)of the devices is enhanced to 20.0% in binary organic solar cells,and an even more remarkable breakthrough PCE of 25.8% is achieved in perovskite/organic tandem devices.This study introduces a straightforward strategy to improve the hole-selective contact of electrodes,ultimately boosting the overall efficiency of the devices.
基金supported by the National Natural Science Foundation of China(22435005,22193042,52202194,21833010,21921001,22175177,21971238,22201284)the Natural Science Foundation of Fujian Province(2023J05076)+1 种基金the Key Research Program of Frontier Sciences of the Chinese Academy of Sciences(ZDBS-LY-SLH024)the China Postdoctoral Science Foundation(2022M713152,2023M733501,2023T160646)。
文摘Polar two-dimensional(2D)perovskites with their excellent semiconductor properties,intrinsic anisotropy,and bulk photovoltaic effect,have emerged as promising candidates for Self-driven polarization-sensitive photodetectors.However,these self-driven polarized detectors typically require fabrication along the spontaneous polarization direction to maintain the device’s operation in the self-driven mode,which imposes additional limitations.Herein,we demonstrate multidirectional self-driven polarization-sensitive photodetection by constructing 2D perovskite-based asymmetric contact devices,Ag/2D perovskite/C.The built-in electric field,originating from the difference in work functions,acts as the driving force for the separation and transport of photogenerated carriers.Notably,this approach does not necessitate a specific direction,thereby enabling multidirectional self-driven photodetection.Under excitation by linearly polarized light,our devices exhibit impressive polarization-sensitive discrimination in multiple directions,achieving polarization ratios of 3.3 and 3.1 along the a and baxes,respectively.Our work enriches the approaches enabling self-driven polarization-sensitive photodetection,free from the previous limitations.
基金Project supported by the National Natural Science Foundation of China(Nos.12021002,12192212,and 12462007)。
文摘This study explores the dynamic contact response of a viscoelastic functionally graded material(FGM)-coated half-plane under a rigid flat punch subjected to a time-harmonic vertical force.The elastic modulus and mass density of the FGM coating vary exponentially along the thickness direction.The FGM coating and the homogeneous half-plane possess viscoelastic properties,which are described by a linearly hysteretic damping model.By applying the asymptotic method and the Fourier integral transform technique,the contact problem is converted into a Cauchy singular integral equation.The effects of excitation frequency,gradient index,damping factor ratio,and punch width on the vertical impedance and dynamic contact stress are analyzed.The results indicate that adjusting the gradient index of the FGM coating can significantly affect the contact stress and vertical impedance.
基金support from the National Natural Science Foundation of China(Grant Nos.42277161 and 42230709).
文摘In rock engineering,natural cracks in rock masses subjected to external loads tend to initiate and propagate,leading to potential safety hazards.To investigate the effect of cracking behavior on the mechanical properties of rocks,the cracking processes of pre-cracked rocks have been extensively studied using numerical modeling methods.The peridynamics(PD)exhibits advantages over other numerical methods due to the absence of the requirements for remeshing and external crack growth criterion.However,for modeling pre-cracked rock cracking processes under impact,current PD implementations lack generally applicable rock constitutive models and impact contact models,which leads to difficulties in determining rock material parameters and efficiently calculating impact loads.This paper proposes a non-ordinary state-based peridynamics(NOSBPD)modeling method integrating the Drucker-Prager(DP)plasticity model and an efficient contact model to address the above problems.In the proposed method,the Drucker-Prager plasticity model is integrated into the NOSBPD,thereby equipping NOSBPD with the capability to accurately characterize the nonlinear stress-strain relationship inherent in rocks.An efficient contact model between particles and meshes is designed to calculate the impact loads,which is essentially a coupling method of PD with the finite element method(FEM).The effectiveness of the proposed NOSBPD modeling method is verified by comparison with other numerical methods and experiments.Experimental results indicate that the proposed method can effectively and accurately predict the 3D cracking processes of pre-cracked cracks under impact loading,and the maximum principal stress is the key driver behind wing crack formation in pre-cracked rocks.
文摘Considering the tunneling effect and the Schottky effect,the metal semiconductor contact is simulated by using self consistent ensemble Monte Carlo method.Under different biases or at different barrier heights,the investigation into the tunneling current indicates that the tunneling effect is of great importance under reverse biases.The Schottky barrier diode current due to Schottky effect is in agreement with the theoretical one.The barrier lowering is found a profound effect on the current transport at the metal semiconductor interface.
文摘N-wells are created by P＋ ion implantation into Si-faced p-type 4H-SiC epilayer. Ti and Ni are deposited in sequence on the surface of the active regions. Ni2Si is identified as the dominant phase by X-ray diffraction （XRD） analysis after metallization annealing. An amorphous C film at the Ni2 Si/SiC interface is confirmed by an X-ray energy-dispersive spectrometer （XEDS）. The Ni2Si and amorphous C film are etched away selectively,followed by deposition of new metal films without annealing. Measurement of the current-voltage characteristics shows that the contacts are still ohmic after the Ni2 Si and amorphous C film are replaced by new metal films. The sheet resistance Rsh of the implanted layers decreases from 975 to 438f2/D, because carbon vacancies （Vc） appeared during annealing,which act as donors for electrons in SiC.
文摘Polysilicon ohmic contacts to n-type 4H-SiC have been fabricated. TLM （transfer length method） test patterns with polysilicon structure are formed on n-wells created by phosphorus ion （P^＋） implantation into a Si-faced p-type 4H-SiC epilayer. The polysilicon is deposited using low-pressure chemical vapor deposition （LPCVD） and doped by phosphorous ions implantation followed by diffusion to obtain a sheet resistance of 22Ω/□. The specific contact resistance pc of n^＋ polysilicon contact to n-type 4H-SiC as low as 3.82 × 10^-5Ω· cm^2 is achieved. The result for sheet resistance Rsh of the phosphorous ion implanted layers in SiC is about 4.9kΩ/□. The mechanisms for n^＋ polysilicon ohmic contact to n-type SiC are discussed.
基金Barnbrook Systems, UK for their support of this work
文摘Arc erosion studies are conducted on AgSnO2 contact materials at different stages in the break operation. A resistive load arrangement is used with up to 42 V DC at 24 A and a constant contact opening velocity. The arc current is terminated at different stages as the arc is drawn between the contacts enabling a study of the arcing phenomena up to that point. Surface profiling of the contacts is conducted to determine the extent of erosion at the different stages as the arc is drawn. Spectral analysis is also conducted on the arc and then related to the extent of erosion. The results show that particular features occur at different stages as the arc is drawn. As the arc is initially established, it goes through an ＂Arc Generation＂ regime where the arc roots are small and immobile on both the anode and the cathode. Material transfer occurs mainly from anode to cathode. The spectral analysis indicates that Sn and O species dominate the arc followed by the Ag species. As the arc is drawn further and enters the ＂Arc Degeneration＂ regime, the anode undergoes significantly larger erosion than the cathode. Also, both contacts indicate that multiple arc roots have formed, which are highly mobile in the later stages of the discharge. The spectral analysis indicates that Ag and N species are in high concentrations compared to other species. The mechanisms of erosion and deposition are discussed in relation to the species within the arc discharge. For the complete break operation, it is found that the anode undergoes major erosion, and it is thought that the gaseous ions species do not dominate the arc under these conditions of short arcs and voltage 〈42 V to cause cathode erosion.
基金financially supported by the National Science Foundation of China-Yunnan United Foundation(No.U0837601)the National Natural Science Foundation of China(No.51267007)the Natural Science Foundation of Yunnan Province(No.2010CD126,No.2012FB195)
文摘A uniform transient temperature field model of electrical contacts operation was found by analyzing the process of closing arc constriction resistance Joule heat ~ breaking arc. Essential parameters of Ag/La2NiO4 electrical contact material for transient temperature field calculation were obtained through tests of electrical contact experimental instrument under 18 V DC in different cur- rents, other correlation experiments, and calculation anal- ysis. The finite element method was applied to solve the transient temperature field, and the features and distribution of the transient temperature field were obtained. The condition of material erosion and mass transfer can be forecasted by those calculation results. It is beneficial to research about the lifetime of Ag/La2NiO4 electrical material.
基金Project supported by the National Basic Research Program of China （Grant No 2002CB311904）, the National Defense Basic Research Program of China （Grant No 51327010101） and the National Natural Science Foundation of China （Grant No 60376001）.
文摘The Ti-Al ohmic contact to n-type 6H-SiC has been fabricated. An array of TLM （transfer length method） test patterns with Au/Ti/A1/Ti/SiC structure is formed on N-wells created by P^＋ ion implantation into Si-faced p-type 6H-SiC epilayer. The specific contact resistance pc as low as 8.64×10-6Ω·cm^2 is achieved after annealing in N2 at 900℃ for 5min. The sheet resistance Rsh of the implanted layers is 975Ω. X-ray diffraction （XRD） analysis shows the formation of Ti3SiC2 at the metal/n-SiC interface after thermal annealing, which is responsible for the low resistance contact.
基金supported by National Natural Science Foundation of China(Grant Nos.51205313,50975232)111 Project(Grant No.B13044)Northwestern Polytechnical University Foundation for Fundamental Research,China(Grant No.JC20110249)
文摘Nanoscale sliding contacts of smooth surfaces or between a single asperity and a smooth surface have been widely investigated by molecular dynamics simulations, while there are few studies on the sliding contacts between two rough surfaces. Actually, the friction of two rough surfaces considering interactions between more asperities should be more realistic. By using multiscale method, friction characteristics of two dimensional nanoscale sliding contacts between rigid multi-asperity tips and elastic textured surfaces are investigated. Four nanoscale textured surfaces with different texture shapes are designed, and six multi-asperity tips composed of cylindrical asperities with different radii are used to slide on the textured surfaces. Friction forces are compared for different tips, and effects of the asperity radii on the friction characteristics are investigated. Average friction forces for all the cases are listed and compared, and effects of texture shapes of the textured surfaces are discussed. The results show that textured surface II has a better structure to reduce friction forces. The multi-asperity tips composed of asperities with R=20r0 （r0=0.227 7 nm） or R=30r0 get higher friction forces compared with other cases, and more atoms of the textured surfaces are taken away by these two tips, which are harmful to reduce friction or wear. For the case of R=10ro, friction forces are also high due to large contact areas, but the sliding processes are stable and few atoms are taken away by the tip. The proposed research considers interactions between more asperities to make the model approach to the real sliding contact problems. The results will help to vary or even control friction characteristics by textured surfaces, or provide references to the design of textured surfaces.
基金the National Key Research and Development Program of China(2017YFE0131500)the Key Research and Development Program of Guangdong Province(2020B090922001)+2 种基金National Natural Science Foundation of China(61834008)Key Research and Development Program of Jiangsu province(BE2020004,BE2021008-1)Guangdong Basic and Applied Basic Research Foundation(2019B1515120091).
文摘Specific contact resistance to p-GaN was measured for various structures of Ni/Pd-based metals and thin(20-30 nm thick)p-InGaN/p^(+)-GaN contacting layers.The effects of surface chemical treatment and annealing temperature were ex-amined.The optimal annealing temperature was determined to be 550°C,above which the sheet resistance of the samples de-graded considerably,suggesting that undesirable alloying had occurred.Pd-containing metal showed~35%lower com-pared to that of single Ni.Very thin(2-3.5 nm thick)p-InGaN contacting layers grown on 20-25 nm thick p^(+)-GaN layers exhib-ited one to two orders of magnitude smaller values of compared to that of p^(+)-GaN without p-InGaN.The current density de-pendence of,which is indicative of nonlinearity in current-voltage relation,was also examined.The lowest achieved through this study was 4.9×10^(-5)Ω·cm^(2)@J=3.4 kA/cm^(2).
文摘We investigate the contact characteristics of bi-layer thin films, Ti（20nm）/Al（200nm） on Si-doped n-type A10.6 Ga0.4 N films grown on sapphire substrate. The surface treatment was aqua regia boiling before metallization and annealing after metallization at different conditions in N2 ambient. High resolution X-ray diffractometery analysis was carried out on the contacts and the surface interfaces of these conditions were compared. A specific contact resistivity pc was determined using the circular transmission line method via current-voltage measurements. A pc of 3.42 × 10^-4 Ω·cm^2 was achieved when annealed at 670℃ for 90s. Then, this ideal ohmic contact was used in back-illuminated solar-blind AlGaN p- i-n detectors and the detectors＇ performances, such as spectral responsivity, dark-current,and breakdown voltage were optimized.
基金supported by National Natural Science Foundation of China (Grant Nos. 51205313, 50975232)Northwestern Polytechnical University Foundation for Fundamental Research of China (Grant No.JC20110249)
文摘There are two separate traditional approaches to model contact problems: continuum and atomistic theory. Continuum theory is successfully used in many domains, but when the scale of the model comes to nanometer, continuum approximation meets challenges. Atomistic theory can catch the detailed behaviors of an individual atom by using molecular dynamics (MD) or quantum mechanics, although accurately, it is usually time-consuming. A multiscale method coupled MD and finite element (FE) is presented. To mesh the FE region automatically, an adaptive method based on the strain energy gradient is introduced to the multiscale method to constitute an adaptive multiscale method. Utilizing the proposed method, adhesive contacts between a rigid cylinder and an elastic substrate are studied, and the results are compared with full MD simulations. The process of FE meshes refinement shows that adaptive multiscale method can make FE mesh generation more flexible. Comparison of the displacements of boundary atoms in the overlap region with the results from full MD simulations indicates that adaptive multiscale method can transfer displacements effectively. Displacements of atoms and FE nodes on the center line of the multiscale model agree well with that of atoms in full MD simulations, which shows the continuity in the overlap region. Furthermore, the Von Mises stress contours and contact force distributions in the contact region are almost same as full MD simulations. The method presented combines multiscale method and adaptive technique, and can provide a more effective way to multiscale method and to the investigation on nanoscale contact problems.
基金supported by the National Natural Science Foundation of China(Nos.11372239,11321062 and 11472210)
文摘We report the first attempt to model the contacts of an ionic polymer metal composite（IPMC） based tactile sensor. The tactile sensor comprises an IPMC actuator, an IPMC sensor and the target to be detected. The system makes use of multiple contacts to work： the actuator comes into contact with the sensor and pushes the movement of sensor; the contact between the sensor and the object detects the existence and the stiffness of the target. We integrate modeling of various physical processes involved in IPMC devices to form a simulation scheme. An iteration and optimization strategy is also described to correlate the experimental and simulation results of an IPMC bending actuator to identify the two key parameters used in electromechanical transduction. Modeling the multiple contacts will aid the design and optimization of such IPMC based soft robotics.
