This study presents the results of a Monte Carlo simulation to compare the statistical power of Siegel-Tukey and Savage tests.The main purpose of the study is to evaluate the statistical power of both tests in scenari...This study presents the results of a Monte Carlo simulation to compare the statistical power of Siegel-Tukey and Savage tests.The main purpose of the study is to evaluate the statistical power of both tests in scenarios involving Normal,Platykurtic and Skewed distributions over different sample sizes and standard deviation values.In the study,standard deviation ratios were set as 2,3,4,1/2,1/3 and 1/4 and power comparisons were made between small and large sample sizes.For equal sample sizes,small sample sizes of 5,8,10,12,16 and 20 and large sample sizes of 25,50,75 and 100 were used.For different sample sizes,the combinations of(4,16),(8,16),(10,20),(16,4),(16,8)and(20,10)small sample sizes and(10,30),(30,10),(50,75),(50,100),(75,50),(75,100),(100,50)and(100,75)large sample sizes were examined in detail.According to the findings,the power analysis under variance heterogeneity conditions shows that the Siegel-Tukey test has a higher statistical power than the other nonparametric Savage test at small and large sample sizes.In particular,the Siegel-Tukey test was reported to offer higher precision and power under variance heterogeneity,regardless of having equal or different sample sizes.展开更多
Multi-angle statistical analysis of tropical cyclones(TCs)and their distant thermodynamic disturbances over Northwest Pacific from July to September during 2001-2020 was conducted.The results show that TCs could trigg...Multi-angle statistical analysis of tropical cyclones(TCs)and their distant thermodynamic disturbances over Northwest Pacific from July to September during 2001-2020 was conducted.The results show that TCs could trigger distant thermodynamic disturbances,which mainly caused an increase in air pressure and a rise in temperature in northern China.The distant thermodynamic disturbances triggered by TCs differed in spatial distribution and intensity in different months.In the same month,the spatial distribution of such disturbances triggered by high-intensity TCs was consistent with the overall pattern,and there was a significant increase in intensity and area.From the probability of TC activities and the significance test of variance of analysis under different levels of P-J index,it is found that TC activities could stimulate the increase of P-J teleconnection index.There was a significant positive correlation between them,which was accompanied by a step effect.展开更多
Healthcare decisions are based on scientific evidence obtained from medical studies by gathering data and analyzing it to obtain the best results. When analyzing data, biostatistics is a powerful tool, but healthcare ...Healthcare decisions are based on scientific evidence obtained from medical studies by gathering data and analyzing it to obtain the best results. When analyzing data, biostatistics is a powerful tool, but healthcare professionals lack knowledge in this field. This lack of knowledge can manifest itself in situations such as choosing the wrong statistical test for the right situation or applying a statistical test without checking its assumptions, leading to inaccurate results and misleading conclusions. With the help of this “narrative review”, the aim is to bring biostatistics closer to healthcare professionals by answering certain questions: how to describe the distribution of data? how to assess the normality of data? how to transform data? and how to choose between nonparametric and parametric tests? Through this work, our hope is that the reader will be able to choose the right test for the right situation, in order to obtain the most accurate results.展开更多
This study aimed to examine the performance of the Siegel-Tukey and Savage tests on data sets with heterogeneous variances. The analysis, considering Normal, Platykurtic, and Skewed distributions and a standard deviat...This study aimed to examine the performance of the Siegel-Tukey and Savage tests on data sets with heterogeneous variances. The analysis, considering Normal, Platykurtic, and Skewed distributions and a standard deviation ratio of 1, was conducted for both small and large sample sizes. For small sample sizes, two main categories were established: equal and different sample sizes. Analyses were performed using Monte Carlo simulations with 20,000 repetitions for each scenario, and the simulations were evaluated using SAS software. For small sample sizes, the I. type error rate of the Siegel-Tukey test generally ranged from 0.045 to 0.055, while the I. type error rate of the Savage test was observed to range from 0.016 to 0.041. Similar trends were observed for Platykurtic and Skewed distributions. In scenarios with different sample sizes, the Savage test generally exhibited lower I. type error rates. For large sample sizes, two main categories were established: equal and different sample sizes. For large sample sizes, the I. type error rate of the Siegel-Tukey test ranged from 0.047 to 0.052, while the I. type error rate of the Savage test ranged from 0.043 to 0.051. In cases of equal sample sizes, both tests generally had lower error rates, with the Savage test providing more consistent results for large sample sizes. In conclusion, it was determined that the Savage test provides lower I. type error rates for small sample sizes and that both tests have similar error rates for large sample sizes. These findings suggest that the Savage test could be a more reliable option when analyzing variance differences.展开更多
Normality testing is a fundamental hypothesis test in the statistical analysis of key biological indicators of diabetes.If this assumption is violated,it may cause the test results to deviate from the true value,leadi...Normality testing is a fundamental hypothesis test in the statistical analysis of key biological indicators of diabetes.If this assumption is violated,it may cause the test results to deviate from the true value,leading to incorrect inferences and conclusions,and ultimately affecting the validity and accuracy of statistical inferences.Considering this,the study designs a unified analysis scheme for different data types based on parametric statistical test methods and non-parametric test methods.The data were grouped according to sample type and divided into discrete data and continuous data.To account for differences among subgroups,the conventional chi-squared test was used for discrete data.The normal distribution is the basis of many statistical methods;if the data does not follow a normal distribution,many statistical methods will fail or produce incorrect results.Therefore,before data analysis and modeling,the data were divided into normal and non-normal groups through normality testing.For normally distributed data,parametric statistical methods were used to judge the differences between groups.For non-normal data,non-parametric tests were employed to improve the accuracy of the analysis.Statistically significant indicators were retained according to the significance index P-value of the statistical test or corresponding statistics.These indicators were then combined with relevant medical background to further explore the etiology leading to the occurrence or transformation of diabetes status.展开更多
Aim To improve the efficiency of fatigue material tests and relevant statistical treatment of test data. Methods\ Least square approach and other special treatments were used. Results and Conclusion\ The concepts...Aim To improve the efficiency of fatigue material tests and relevant statistical treatment of test data. Methods\ Least square approach and other special treatments were used. Results and Conclusion\ The concepts of each phase in fatigue tests and statistical treatment are clarified. The method proposed leads to three important properties. Reduced number of specimens brings to the advantage of lowering test expenditures. The whole test procedure has more flexibility for there is no need to conduct many tests at the same stress level as in traditional cases.展开更多
To study the distribution law and random characteristics of casting defects in steel castings,24 civil engineering structural cast steel joints were divided into two groups:simple cast steel joints and complex cast st...To study the distribution law and random characteristics of casting defects in steel castings,24 civil engineering structural cast steel joints were divided into two groups:simple cast steel joints and complex cast steel joints.Three kinds of nondestructive testing(NDT)methods,namely,visual,magnetic particle,and ultrasonic inspections,were used to detect the macroscopic defects in joints.The NDT results were then statistically analyzed.The results show that the unfused core support is a common defect of complex cast steel joints,and the defect can be seen visually,so excavation and repair welding should be carried out before castings leave factories.Casting cracks are extremely likely to occur in the intersection area of tubes,which is called the ultrasonic inspection blind zone.The occurrence probability of gas pores on simple cast steel joints is the largest,and the occurrence probability of core support incomplete fusions on complex cast steel joints is the largest.However,when cast steel joints are counted as a whole sample,the occurrence probability of gas pores is larger than that of core support incomplete fusions.Therefore,it is the most common defect in cast steel joints.展开更多
Three-point bending fatigue experiments were conducted on a typical Zr-based bulk metallic glass(BMG)at ambient temperature to investigate the fatigue behavior under cyclic loading conditions.Results show that the str...Three-point bending fatigue experiments were conducted on a typical Zr-based bulk metallic glass(BMG)at ambient temperature to investigate the fatigue behavior under cyclic loading conditions.Results show that the stress amplitude-cycles to failure(S-N)curve of the Zr-based BMG is determined,and the fatigue endurance limit is 442 MPa(stress amplitude).To evaluate the probability-stress amplitude-cycles to failure(P-S-N)curve,an estimation method based on maximum likelihood was proposed,which relies on statistical principles to estimate the fatigue life of the material and allows for a reduction in the number of samples required,offering a cost-effective and efficient alternative to traditional testing methods.The experimental results align with the American Society for Testing and Materials(ASTM)standard,indicating the reliability and accuracy of this estimation method in evaluating the fatigue behavior of Zr-based BMG.展开更多
This paper systematically studies the statistical diagnosis and hypothesis testing for the semiparametric linear regression model according to the theories and methods of the statistical diagnosis and hypothesis testi...This paper systematically studies the statistical diagnosis and hypothesis testing for the semiparametric linear regression model according to the theories and methods of the statistical diagnosis and hypothesis testing for parametric regression model.Several diagnostic measures and the methods for gross error testing are derived.Especially,the global and local influence analysis of the gross error on the parameter X and the nonparameter s are discussed in detail;at the same time,the paper proves that the data point deletion model is equivalent to the mean shift model for the semiparametric regression model.Finally,with one simulative computing example,some helpful conclusions are drawn.展开更多
In this study, the statistical powers of Kolmogorov-Smimov two-sample （KS-2） and Wald Wolfowitz （WW） tests, non-parametric tests used in testing data from two independent samples, have been compared in terms of fi...In this study, the statistical powers of Kolmogorov-Smimov two-sample （KS-2） and Wald Wolfowitz （WW） tests, non-parametric tests used in testing data from two independent samples, have been compared in terms of fixed skewness and fixed kurtosis by means of Monte Carlo simulation. This comparison has been made when the ratio of variance is two as well as with equal and different sample sizes for large sample volumes. The sample used in the study is： （25, 25）, （25, 50）, （25, 75）, （25, 100）, （50, 25）, （50, 50）, （50, 75）, （50, 100）, （75, 25）, （75, 50）, （75, 75）, （75, 100）, （100, 25）, （100, 50）, （100, 75）, and （100, 100）. According to the results of the study, it has been observed that the statistical power of both tests decreases when the coefficient of kurtosis is held fixed and the coefficient of skewness is reduced while it increases when the coefficient of skewness is held fixed and the coefficient of kurtosis is reduced. When the ratio of skewness is reduced in the case of fixed kurtosis, the WW test is stronger in sample volumes （25, 25）, （25, 50）, （25, 75）, （25, 100）, （50, 75）, and （50, 100） while KS-2 test is stronger in other sample volumes. When the ratio of kurtosis is reduced in the case of fixed skewness, the statistical power of WW test is stronger in volume samples （25, 25）, （25, 75）, （25, 100）, and （75, 25） while KS-2 test is stronger in other sample volumes.展开更多
This paper describes the statistical methods of the comparison of the incidence or mortality rates in cancer registry and descriptive epidemiology, and the features of microcomputer program (CANTEST) which was designe...This paper describes the statistical methods of the comparison of the incidence or mortality rates in cancer registry and descriptive epidemiology, and the features of microcomputer program (CANTEST) which was designed to perform the methods. The program was written in IBM BASIC language. Using the program CANTEST we presented here the user can do several statistical tests or estimations as follow: 1. the comparison of the adjusted rates which were calculated by directly or indirectly standardized methods, 2. the calculation of the slope of regression line for testing the linear trends of the adjusted rates, 3. the estimation of the 95% or 99%conndence intervals of the directly adjusted rates, of the cumulative rates (0-64 and 0-74), and of the cumulative risk. Several examples are presented for testing the performances of the program.展开更多
A brief description of infrared IRA-935 water vapour measuring instrument is presented and integrated vertical water vapour content W 0 in the atmosphere at Gaomeigu and Fenghuangshan sites and precision analyses are ...A brief description of infrared IRA-935 water vapour measuring instrument is presented and integrated vertical water vapour content W 0 in the atmosphere at Gaomeigu and Fenghuangshan sites and precision analyses are given in the paper. The daily variation and distributions of W 0 in a whole year and monthly average W 0 measurements at these two sites are discussed in more detail. The statistical results of the observational data in the whole year are also analysed and discussed.展开更多
We are very grateful for the letter written by Dr Lange,and indeed apologize for the mistakes noted in the word-ing of our text regarding statistical analysis.This wasdue to changes carried out while revising the manu...We are very grateful for the letter written by Dr Lange,and indeed apologize for the mistakes noted in the word-ing of our text regarding statistical analysis.This wasdue to changes carried out while revising the manuscriptat the request of reviewers,whom we thank for,point-ing out several issues that were actually similar to thosenoted by Dr.Lange.Unfortunately,we were unable todescribe and discuss our findings properly in the context展开更多
The West Development Policy being implemented in China is causing significant land use and land cover （LULC） changes in West China. With the up-to-date satellite database of the Global Land Cover Characteristics Dat...The West Development Policy being implemented in China is causing significant land use and land cover （LULC） changes in West China. With the up-to-date satellite database of the Global Land Cover Characteristics Database （GLCCD） that characterizes the lower boundary conditions, the regional climate model RIEMS-TEA is used to simulate possible impacts of the significant LULC variation. The model was run for five continuous three-month periods from 1 June to 1 September of 1993, 1994, 1995, 1996, and 1997, and the results of the five groups are examined by means of a student t-test to identify the statistical significance of regional climate variation. The main results are： （1） The regional climate is affected by the LULC variation because the equilibrium of water and heat transfer in the air-vegetation interface is changed. （2） The integrated impact of the LULC variation on regional climate is not only limited to West China where the LULC varies, but also to some areas in the model domain where the LULC does not vary at all. （3） The East Asian monsoon system and its vertical structure are adjusted by the large scale LULC variation in western China, where the consequences are the enhancement of the westward water vapor transfer from the east oast and the relevant increase of wet-hydrostatic energy in the middle-upper atmospheric layers. （4） The ecological engineering in West China affects significantly the regional climate in Northwest China, North China and the middle-lower reaches of the Yangtze River; there are obvious effects in South, Northeast, and Southwest China, but minor effects in Tibet.展开更多
A novel statistical approach to evaluate the manufacturing quality of press coated tablets in terms of the centering of their core is presented. We also provide a formula to determine the necessary sample size. This a...A novel statistical approach to evaluate the manufacturing quality of press coated tablets in terms of the centering of their core is presented. We also provide a formula to determine the necessary sample size. This approach is applied to real data.展开更多
Search-based statistical structural testing(SBSST)is a promising technique that uses automated search to construct input distributions for statistical structural testing.It has been proved that a simple search algorit...Search-based statistical structural testing(SBSST)is a promising technique that uses automated search to construct input distributions for statistical structural testing.It has been proved that a simple search algorithm,for example,the hill-climber is able to optimize an input distribution.However,due to the noisy fitness estimation of the minimum triggering probability among all cover elements(Tri-Low-Bound),the existing approach does not show a satisfactory efficiency.Constructing input distributions to satisfy the Tri-Low-Bound criterion requires an extensive computation time.Tri-Low-Bound is considered a strong criterion,and it is demonstrated to sustain a high fault-detecting ability.This article tries to answer the following question:if we use a relaxed constraint that significantly reduces the time consumption on search,can the optimized input distribution still be effective in faultdetecting ability?In this article,we propose a type of criterion called fairnessenhanced-sum-of-triggering-probability(p-L1-Max).The criterion utilizes the sum of triggering probabilities as the fitness value and leverages a parameter p to adjust the uniformness of test data generation.We conducted extensive experiments to compare the computation time and the fault-detecting ability between the two criteria.The result shows that the 1.0-L1-Max criterion has the highest efficiency,and it is more practical to use than the Tri-Low-Bound criterion.To measure a criterion’s fault-detecting ability,we introduce a definition of expected faults found in the effective test set size region.To measure the effective test set size region,we present a theoretical analysis of the expected faults found with respect to various test set sizes and use the uniform distribution as a baseline to derive the effective test set size region’s definition.展开更多
Choosing appropriate statistical tests is crucial but deciding which tests to use can be challenging. Different tests suit different types of data and research questions, so it is important to choose the right one. Kn...Choosing appropriate statistical tests is crucial but deciding which tests to use can be challenging. Different tests suit different types of data and research questions, so it is important to choose the right one. Knowing how to select an appropriate test can lead to more accurate results. Invalid results and misleading conclusions may be drawn from a study if an incorrect statistical test is used. Therefore, to avoid these it is essential to understand the nature of the data, the research question, and the assumptions of the tests before selecting one. This is because there are a wide variety of tests available. This paper provides a step-by-step approach to selecting the right statistical test for any study, with an explanation of when it is appropriate to use it and relevant examples of each statistical test. Furthermore, this guide provides a comprehensive overview of the assumptions of each test and what to do if these assumptions are violated.展开更多
Choosing appropriate statistical tests is crucial but deciding which tests to use can be challenging. Different tests suit different types of data and research questions, so it is important to choose the right one. Kn...Choosing appropriate statistical tests is crucial but deciding which tests to use can be challenging. Different tests suit different types of data and research questions, so it is important to choose the right one. Knowing how to select an appropriate test can lead to more accurate results. Invalid results and misleading conclusions may be drawn from a study if an incorrect statistical test is used. Therefore, to avoid these it is essential to understand the nature of the data, the research question, and the assumptions of the tests before selecting one. This is because there are a wide variety of tests available. This paper provides a step-by-step approach to selecting the right statistical test for any study, with an explanation of when it is appropriate to use it and relevant examples of each statistical test. Furthermore, this guide provides a comprehensive overview of the assumptions of each test and what to do if these assumptions are violated.展开更多
Two statistical validation methods were used to evaluate the confidence level of the Total Column Ozone (TCO) measurements recorded by satellite systems measuring simultaneously, one using the normal distribution and ...Two statistical validation methods were used to evaluate the confidence level of the Total Column Ozone (TCO) measurements recorded by satellite systems measuring simultaneously, one using the normal distribution and another using the Mann-Whitney test. First, the reliability of the TCO measurements was studied hemispherically. While similar coincidences and levels of significance > 0.05 were found with the two statistical tests, an enormous variability in the levels of significance throughout the year was also exposed. Then, using the same statistical comparison methods, a latitudinal study was carried out in order to elucidate the geographical distribution that gave rise to this variability. Our study reveals that between the TOMS and OMI measurements in 2005 there was only a coincidence in 50% of the latitudes, which explained the variability. This implies that for 2005, the TOMS measurements are not completely reliable, except between the -50° and -15° latitude band in the southern hemisphere and between +15° and +50° latitude band in the northern hemisphere. In the case of OMI-OMPS, we observe that between 2011 and 2016 the measurements of both satellite systems are reasonably similar with a confidence level higher than 95%. However, in 2017 a band with a width of 20° latitude centered on the equator appeared, in which the significance levels were much less than 0.05, indicating that one of the measurement systems had begun to fail. In 2018, the fault was not only located in the equator, but was also replicated in various bands in the Southern Hemisphere. We interpret this as evidence of irreversible failure in one of the measurement systems.展开更多
文摘This study presents the results of a Monte Carlo simulation to compare the statistical power of Siegel-Tukey and Savage tests.The main purpose of the study is to evaluate the statistical power of both tests in scenarios involving Normal,Platykurtic and Skewed distributions over different sample sizes and standard deviation values.In the study,standard deviation ratios were set as 2,3,4,1/2,1/3 and 1/4 and power comparisons were made between small and large sample sizes.For equal sample sizes,small sample sizes of 5,8,10,12,16 and 20 and large sample sizes of 25,50,75 and 100 were used.For different sample sizes,the combinations of(4,16),(8,16),(10,20),(16,4),(16,8)and(20,10)small sample sizes and(10,30),(30,10),(50,75),(50,100),(75,50),(75,100),(100,50)and(100,75)large sample sizes were examined in detail.According to the findings,the power analysis under variance heterogeneity conditions shows that the Siegel-Tukey test has a higher statistical power than the other nonparametric Savage test at small and large sample sizes.In particular,the Siegel-Tukey test was reported to offer higher precision and power under variance heterogeneity,regardless of having equal or different sample sizes.
基金the National Natural Science Foundation of China(42305011).
文摘Multi-angle statistical analysis of tropical cyclones(TCs)and their distant thermodynamic disturbances over Northwest Pacific from July to September during 2001-2020 was conducted.The results show that TCs could trigger distant thermodynamic disturbances,which mainly caused an increase in air pressure and a rise in temperature in northern China.The distant thermodynamic disturbances triggered by TCs differed in spatial distribution and intensity in different months.In the same month,the spatial distribution of such disturbances triggered by high-intensity TCs was consistent with the overall pattern,and there was a significant increase in intensity and area.From the probability of TC activities and the significance test of variance of analysis under different levels of P-J index,it is found that TC activities could stimulate the increase of P-J teleconnection index.There was a significant positive correlation between them,which was accompanied by a step effect.
文摘Healthcare decisions are based on scientific evidence obtained from medical studies by gathering data and analyzing it to obtain the best results. When analyzing data, biostatistics is a powerful tool, but healthcare professionals lack knowledge in this field. This lack of knowledge can manifest itself in situations such as choosing the wrong statistical test for the right situation or applying a statistical test without checking its assumptions, leading to inaccurate results and misleading conclusions. With the help of this “narrative review”, the aim is to bring biostatistics closer to healthcare professionals by answering certain questions: how to describe the distribution of data? how to assess the normality of data? how to transform data? and how to choose between nonparametric and parametric tests? Through this work, our hope is that the reader will be able to choose the right test for the right situation, in order to obtain the most accurate results.
文摘This study aimed to examine the performance of the Siegel-Tukey and Savage tests on data sets with heterogeneous variances. The analysis, considering Normal, Platykurtic, and Skewed distributions and a standard deviation ratio of 1, was conducted for both small and large sample sizes. For small sample sizes, two main categories were established: equal and different sample sizes. Analyses were performed using Monte Carlo simulations with 20,000 repetitions for each scenario, and the simulations were evaluated using SAS software. For small sample sizes, the I. type error rate of the Siegel-Tukey test generally ranged from 0.045 to 0.055, while the I. type error rate of the Savage test was observed to range from 0.016 to 0.041. Similar trends were observed for Platykurtic and Skewed distributions. In scenarios with different sample sizes, the Savage test generally exhibited lower I. type error rates. For large sample sizes, two main categories were established: equal and different sample sizes. For large sample sizes, the I. type error rate of the Siegel-Tukey test ranged from 0.047 to 0.052, while the I. type error rate of the Savage test ranged from 0.043 to 0.051. In cases of equal sample sizes, both tests generally had lower error rates, with the Savage test providing more consistent results for large sample sizes. In conclusion, it was determined that the Savage test provides lower I. type error rates for small sample sizes and that both tests have similar error rates for large sample sizes. These findings suggest that the Savage test could be a more reliable option when analyzing variance differences.
基金National Natural Science Foundation of China(No.12271261)Postgraduate Research and Practice Innovation Program of Jiangsu Province,China(Grant No.SJCX230368)。
文摘Normality testing is a fundamental hypothesis test in the statistical analysis of key biological indicators of diabetes.If this assumption is violated,it may cause the test results to deviate from the true value,leading to incorrect inferences and conclusions,and ultimately affecting the validity and accuracy of statistical inferences.Considering this,the study designs a unified analysis scheme for different data types based on parametric statistical test methods and non-parametric test methods.The data were grouped according to sample type and divided into discrete data and continuous data.To account for differences among subgroups,the conventional chi-squared test was used for discrete data.The normal distribution is the basis of many statistical methods;if the data does not follow a normal distribution,many statistical methods will fail or produce incorrect results.Therefore,before data analysis and modeling,the data were divided into normal and non-normal groups through normality testing.For normally distributed data,parametric statistical methods were used to judge the differences between groups.For non-normal data,non-parametric tests were employed to improve the accuracy of the analysis.Statistically significant indicators were retained according to the significance index P-value of the statistical test or corresponding statistics.These indicators were then combined with relevant medical background to further explore the etiology leading to the occurrence or transformation of diabetes status.
文摘Aim To improve the efficiency of fatigue material tests and relevant statistical treatment of test data. Methods\ Least square approach and other special treatments were used. Results and Conclusion\ The concepts of each phase in fatigue tests and statistical treatment are clarified. The method proposed leads to three important properties. Reduced number of specimens brings to the advantage of lowering test expenditures. The whole test procedure has more flexibility for there is no need to conduct many tests at the same stress level as in traditional cases.
基金The National Key R&D Program of China(No.2017YFC0805100)the National Natural Science Foundation of China(No.51578137)+1 种基金the Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutionsthe Open Research Fund Program of Jiangsu Key Laboratory of Engineering Mechanics。
文摘To study the distribution law and random characteristics of casting defects in steel castings,24 civil engineering structural cast steel joints were divided into two groups:simple cast steel joints and complex cast steel joints.Three kinds of nondestructive testing(NDT)methods,namely,visual,magnetic particle,and ultrasonic inspections,were used to detect the macroscopic defects in joints.The NDT results were then statistically analyzed.The results show that the unfused core support is a common defect of complex cast steel joints,and the defect can be seen visually,so excavation and repair welding should be carried out before castings leave factories.Casting cracks are extremely likely to occur in the intersection area of tubes,which is called the ultrasonic inspection blind zone.The occurrence probability of gas pores on simple cast steel joints is the largest,and the occurrence probability of core support incomplete fusions on complex cast steel joints is the largest.However,when cast steel joints are counted as a whole sample,the occurrence probability of gas pores is larger than that of core support incomplete fusions.Therefore,it is the most common defect in cast steel joints.
基金Guangdong Basic and Applied Basic Research Foundation(2022A1515010207)Shaanxi Key Laboratory of Artificially-Structured Functional Materials and Devices(AFMD-KFJJ-22204)。
文摘Three-point bending fatigue experiments were conducted on a typical Zr-based bulk metallic glass(BMG)at ambient temperature to investigate the fatigue behavior under cyclic loading conditions.Results show that the stress amplitude-cycles to failure(S-N)curve of the Zr-based BMG is determined,and the fatigue endurance limit is 442 MPa(stress amplitude).To evaluate the probability-stress amplitude-cycles to failure(P-S-N)curve,an estimation method based on maximum likelihood was proposed,which relies on statistical principles to estimate the fatigue life of the material and allows for a reduction in the number of samples required,offering a cost-effective and efficient alternative to traditional testing methods.The experimental results align with the American Society for Testing and Materials(ASTM)standard,indicating the reliability and accuracy of this estimation method in evaluating the fatigue behavior of Zr-based BMG.
基金Supported by the National Natural Science Foundation of China （No. 40604001）,the National High Technology Research and Development Program of China （No. 2007AA12Z312）.Acknowledgement The authors thank Prof. Tao Benzao and Prof. Wang Xingzhou for several helpful suggestions during the preparation of this manuscript.
文摘This paper systematically studies the statistical diagnosis and hypothesis testing for the semiparametric linear regression model according to the theories and methods of the statistical diagnosis and hypothesis testing for parametric regression model.Several diagnostic measures and the methods for gross error testing are derived.Especially,the global and local influence analysis of the gross error on the parameter X and the nonparameter s are discussed in detail;at the same time,the paper proves that the data point deletion model is equivalent to the mean shift model for the semiparametric regression model.Finally,with one simulative computing example,some helpful conclusions are drawn.
文摘In this study, the statistical powers of Kolmogorov-Smimov two-sample （KS-2） and Wald Wolfowitz （WW） tests, non-parametric tests used in testing data from two independent samples, have been compared in terms of fixed skewness and fixed kurtosis by means of Monte Carlo simulation. This comparison has been made when the ratio of variance is two as well as with equal and different sample sizes for large sample volumes. The sample used in the study is： （25, 25）, （25, 50）, （25, 75）, （25, 100）, （50, 25）, （50, 50）, （50, 75）, （50, 100）, （75, 25）, （75, 50）, （75, 75）, （75, 100）, （100, 25）, （100, 50）, （100, 75）, and （100, 100）. According to the results of the study, it has been observed that the statistical power of both tests decreases when the coefficient of kurtosis is held fixed and the coefficient of skewness is reduced while it increases when the coefficient of skewness is held fixed and the coefficient of kurtosis is reduced. When the ratio of skewness is reduced in the case of fixed kurtosis, the WW test is stronger in sample volumes （25, 25）, （25, 50）, （25, 75）, （25, 100）, （50, 75）, and （50, 100） while KS-2 test is stronger in other sample volumes. When the ratio of kurtosis is reduced in the case of fixed skewness, the statistical power of WW test is stronger in volume samples （25, 25）, （25, 75）, （25, 100）, and （75, 25） while KS-2 test is stronger in other sample volumes.
文摘This paper describes the statistical methods of the comparison of the incidence or mortality rates in cancer registry and descriptive epidemiology, and the features of microcomputer program (CANTEST) which was designed to perform the methods. The program was written in IBM BASIC language. Using the program CANTEST we presented here the user can do several statistical tests or estimations as follow: 1. the comparison of the adjusted rates which were calculated by directly or indirectly standardized methods, 2. the calculation of the slope of regression line for testing the linear trends of the adjusted rates, 3. the estimation of the 95% or 99%conndence intervals of the directly adjusted rates, of the cumulative rates (0-64 and 0-74), and of the cumulative risk. Several examples are presented for testing the performances of the program.
文摘A brief description of infrared IRA-935 water vapour measuring instrument is presented and integrated vertical water vapour content W 0 in the atmosphere at Gaomeigu and Fenghuangshan sites and precision analyses are given in the paper. The daily variation and distributions of W 0 in a whole year and monthly average W 0 measurements at these two sites are discussed in more detail. The statistical results of the observational data in the whole year are also analysed and discussed.
文摘We are very grateful for the letter written by Dr Lange,and indeed apologize for the mistakes noted in the word-ing of our text regarding statistical analysis.This wasdue to changes carried out while revising the manuscriptat the request of reviewers,whom we thank for,point-ing out several issues that were actually similar to thosenoted by Dr.Lange.Unfortunately,we were unable todescribe and discuss our findings properly in the context
文摘The West Development Policy being implemented in China is causing significant land use and land cover （LULC） changes in West China. With the up-to-date satellite database of the Global Land Cover Characteristics Database （GLCCD） that characterizes the lower boundary conditions, the regional climate model RIEMS-TEA is used to simulate possible impacts of the significant LULC variation. The model was run for five continuous three-month periods from 1 June to 1 September of 1993, 1994, 1995, 1996, and 1997, and the results of the five groups are examined by means of a student t-test to identify the statistical significance of regional climate variation. The main results are： （1） The regional climate is affected by the LULC variation because the equilibrium of water and heat transfer in the air-vegetation interface is changed. （2） The integrated impact of the LULC variation on regional climate is not only limited to West China where the LULC varies, but also to some areas in the model domain where the LULC does not vary at all. （3） The East Asian monsoon system and its vertical structure are adjusted by the large scale LULC variation in western China, where the consequences are the enhancement of the westward water vapor transfer from the east oast and the relevant increase of wet-hydrostatic energy in the middle-upper atmospheric layers. （4） The ecological engineering in West China affects significantly the regional climate in Northwest China, North China and the middle-lower reaches of the Yangtze River; there are obvious effects in South, Northeast, and Southwest China, but minor effects in Tibet.
文摘A novel statistical approach to evaluate the manufacturing quality of press coated tablets in terms of the centering of their core is presented. We also provide a formula to determine the necessary sample size. This approach is applied to real data.
基金Publication of this article in an open access journal was funded by the Portland State University Library’s Open Access Fund.
文摘Search-based statistical structural testing(SBSST)is a promising technique that uses automated search to construct input distributions for statistical structural testing.It has been proved that a simple search algorithm,for example,the hill-climber is able to optimize an input distribution.However,due to the noisy fitness estimation of the minimum triggering probability among all cover elements(Tri-Low-Bound),the existing approach does not show a satisfactory efficiency.Constructing input distributions to satisfy the Tri-Low-Bound criterion requires an extensive computation time.Tri-Low-Bound is considered a strong criterion,and it is demonstrated to sustain a high fault-detecting ability.This article tries to answer the following question:if we use a relaxed constraint that significantly reduces the time consumption on search,can the optimized input distribution still be effective in faultdetecting ability?In this article,we propose a type of criterion called fairnessenhanced-sum-of-triggering-probability(p-L1-Max).The criterion utilizes the sum of triggering probabilities as the fitness value and leverages a parameter p to adjust the uniformness of test data generation.We conducted extensive experiments to compare the computation time and the fault-detecting ability between the two criteria.The result shows that the 1.0-L1-Max criterion has the highest efficiency,and it is more practical to use than the Tri-Low-Bound criterion.To measure a criterion’s fault-detecting ability,we introduce a definition of expected faults found in the effective test set size region.To measure the effective test set size region,we present a theoretical analysis of the expected faults found with respect to various test set sizes and use the uniform distribution as a baseline to derive the effective test set size region’s definition.
文摘Choosing appropriate statistical tests is crucial but deciding which tests to use can be challenging. Different tests suit different types of data and research questions, so it is important to choose the right one. Knowing how to select an appropriate test can lead to more accurate results. Invalid results and misleading conclusions may be drawn from a study if an incorrect statistical test is used. Therefore, to avoid these it is essential to understand the nature of the data, the research question, and the assumptions of the tests before selecting one. This is because there are a wide variety of tests available. This paper provides a step-by-step approach to selecting the right statistical test for any study, with an explanation of when it is appropriate to use it and relevant examples of each statistical test. Furthermore, this guide provides a comprehensive overview of the assumptions of each test and what to do if these assumptions are violated.
文摘Choosing appropriate statistical tests is crucial but deciding which tests to use can be challenging. Different tests suit different types of data and research questions, so it is important to choose the right one. Knowing how to select an appropriate test can lead to more accurate results. Invalid results and misleading conclusions may be drawn from a study if an incorrect statistical test is used. Therefore, to avoid these it is essential to understand the nature of the data, the research question, and the assumptions of the tests before selecting one. This is because there are a wide variety of tests available. This paper provides a step-by-step approach to selecting the right statistical test for any study, with an explanation of when it is appropriate to use it and relevant examples of each statistical test. Furthermore, this guide provides a comprehensive overview of the assumptions of each test and what to do if these assumptions are violated.
文摘Two statistical validation methods were used to evaluate the confidence level of the Total Column Ozone (TCO) measurements recorded by satellite systems measuring simultaneously, one using the normal distribution and another using the Mann-Whitney test. First, the reliability of the TCO measurements was studied hemispherically. While similar coincidences and levels of significance > 0.05 were found with the two statistical tests, an enormous variability in the levels of significance throughout the year was also exposed. Then, using the same statistical comparison methods, a latitudinal study was carried out in order to elucidate the geographical distribution that gave rise to this variability. Our study reveals that between the TOMS and OMI measurements in 2005 there was only a coincidence in 50% of the latitudes, which explained the variability. This implies that for 2005, the TOMS measurements are not completely reliable, except between the -50° and -15° latitude band in the southern hemisphere and between +15° and +50° latitude band in the northern hemisphere. In the case of OMI-OMPS, we observe that between 2011 and 2016 the measurements of both satellite systems are reasonably similar with a confidence level higher than 95%. However, in 2017 a band with a width of 20° latitude centered on the equator appeared, in which the significance levels were much less than 0.05, indicating that one of the measurement systems had begun to fail. In 2018, the fault was not only located in the equator, but was also replicated in various bands in the Southern Hemisphere. We interpret this as evidence of irreversible failure in one of the measurement systems.
