This paper presents a method to realize compact broadband low-RCS ReflectArray(RA)antenna based on a Frequency Selective Surface(FSS)absorber and a reflective metasurface.Such an FSS absorber consists of a resistance-...This paper presents a method to realize compact broadband low-RCS ReflectArray(RA)antenna based on a Frequency Selective Surface(FSS)absorber and a reflective metasurface.Such an FSS absorber consists of a resistance-loaded lossy layer and an FSS layer,which is utilized to reach an absorption-transmission response.The bottom reflective metasurface works as a phase array,reshaping the quasi-sphere wave from the feeding antenna into the quasi-plane wave.As a demonstration,the low-RCS RA antenna is simulated,fabricated,and measured.The simulated and measured results show that the developed low-RCS RA antenna has an aperture efficiency of 42.7%and a gain of 25.4 dBi in the X band.In the meantime,it simultaneously reaches the 10 dB RCS reduction for the orthogonal polarizations at the S and C bands,corresponding to a fractal bandwidth of 120%.Specifically,the adopted patch-feeding antenna makes the RA antenna more compact than the horn-feed conventional ones.Furthermore,the proposed RA antenna uses a few layers of substrates,making it lower in cost and easier for fabrication.The proposed design may have potential application in integrated stealth communication systems.展开更多
The method of this paper is based on change in the geometrical shape of the reflectarray plane which is similar to a concave shape and with this changing, it is tried to make the incident waves orthogonal as much as p...The method of this paper is based on change in the geometrical shape of the reflectarray plane which is similar to a concave shape and with this changing, it is tried to make the incident waves orthogonal as much as possible in order to remove the phase error caused by incident wave variation. The other benefit of this work is omitting frequency change error caused by path difference between reflectarray antenna bandwidth. Two types of reflectarray antennas operating at X-band frequency with a linear polarization are considered in this design: concave and flat reflectarray antennas with the diameter of 135 mm. elements which are used in this paper are variable-size patches. The proposed reflectarray antenna (concave) approximately has 25% 3-dB bandwidth which shows an increment in bandwidth about 18% compared to flat reflectarray antenna.展开更多
This work provides the design and analysis of a single layer,linearly polarized millimeter wave reflectarray antenna with mutual coupling optimization.Detailed analysis was carried out at 26GHz design frequency using ...This work provides the design and analysis of a single layer,linearly polarized millimeter wave reflectarray antenna with mutual coupling optimization.Detailed analysis was carried out at 26GHz design frequency using the simulations of the reflectarray unit cells as well as the periodic reflectarray antenna.The simulated results were verified by the scattering parameter and far-fieldmeasurements of the unit cell and periodic arrays,respectively.Aclose agreement between the simulated and measured results was observed in all the cases.Apart from the unit cells and reflectarray,the waveguide and horn antenna were also fabricated to be used in the measurements.The measured scattering parameter results of the proposed circular ring unit cells provided a maximum reflection loss of 2.8 dB with phase errors below 10°.On the other hand,the measured far-field results of the 20×20 reflectarray antenna provided a maximum gain of 26.45 dB with a maximum 3 dB beam width of 12°and 1 dB gain drop bandwidth of 13.1%.The performance demonstrated by the proposed reflectarray antenna makes it a potential candidate to be used in modern-day applications such as 5th Generation(5G)and 6th Generation(6G)communication systems.展开更多
Bi-function Compact graphene lens antenna in terahertz (THz) band has been investigated. The array function is switched between two status, reflectarray and/or transmitarray. The tunability of graphene conductivity in...Bi-function Compact graphene lens antenna in terahertz (THz) band has been investigated. The array function is switched between two status, reflectarray and/or transmitarray. The tunability of graphene conductivity introduces the bi-function characteristics of a single array structure in the THz band. The design depends on changing the graphene DC biasing voltage to transform the transmitting antenna to reflecting antenna. The compact structure of the antenna array saves the cost and the allocation area for the terahertz communication applications. A 13 × 13 reflectarray/ transmitarray antenna covering an area of 364 × 364 μm<sup>2</sup> is proposed. A dual-beams reflectarray/transmitarray antenna is achieved by rearranging the cell elements of the array successively. Finally, a single structure is used to work as reflectarray and transmitarray antenna at the same time by rearranging the applied voltages between the different pieces of the graphene sheet using chess board arrangement. The phases of the successive unit-cells are kept the same of their locations in the original full array. The radiation characteristics of the array are investigated using the CST Microwave Studio for the bi-function operation.展开更多
This paper proposes a low-profile, aperture-shared dual-band bidirectional circularly polarized (CP) antenna. The design incorporates a partially reflective surface (PRS) and a multifunctional transmission-reflection ...This paper proposes a low-profile, aperture-shared dual-band bidirectional circularly polarized (CP) antenna. The design incorporates a partially reflective surface (PRS) and a multifunctional transmission-reflection integrated metasurface, enabling the integration of CP Fabry-Pérot cavity antenna (FPCA) and CP folded reflectarray (FRA), while preserving circular polarization purity and delivering high gain performance. In this design, the PRS acts as the reflector for the FRA at 8 GHz, while the multifunctional metasurface serves as the reflector for the FPCA at 8 GHz and provides phase compensation for the FRA at 13 GHz. Consequently, the FPCA and FRA can share the same aperture with high aperture reuse efficiency. The antenna achieves high gain across both frequency bands, with peak gains of 19.4 dBic and 22.8 dBic, respectively, without complex feeding networks. Leveraging the advantage of low focal-length-to-diameter ratio of the FRA, the array’s profile is reduced, with a height-to-diameter ratio of only 0.46.展开更多
基金supported by the China Postdoctoral Science Foundation(No.2021M693712)the National Natural Science Foundation of China(Nos.62205038 and 62031006)the Chongqing Postdoctoral Science Foundation(Special Funding),China(No.XmT20200020).
文摘This paper presents a method to realize compact broadband low-RCS ReflectArray(RA)antenna based on a Frequency Selective Surface(FSS)absorber and a reflective metasurface.Such an FSS absorber consists of a resistance-loaded lossy layer and an FSS layer,which is utilized to reach an absorption-transmission response.The bottom reflective metasurface works as a phase array,reshaping the quasi-sphere wave from the feeding antenna into the quasi-plane wave.As a demonstration,the low-RCS RA antenna is simulated,fabricated,and measured.The simulated and measured results show that the developed low-RCS RA antenna has an aperture efficiency of 42.7%and a gain of 25.4 dBi in the X band.In the meantime,it simultaneously reaches the 10 dB RCS reduction for the orthogonal polarizations at the S and C bands,corresponding to a fractal bandwidth of 120%.Specifically,the adopted patch-feeding antenna makes the RA antenna more compact than the horn-feed conventional ones.Furthermore,the proposed RA antenna uses a few layers of substrates,making it lower in cost and easier for fabrication.The proposed design may have potential application in integrated stealth communication systems.
文摘The method of this paper is based on change in the geometrical shape of the reflectarray plane which is similar to a concave shape and with this changing, it is tried to make the incident waves orthogonal as much as possible in order to remove the phase error caused by incident wave variation. The other benefit of this work is omitting frequency change error caused by path difference between reflectarray antenna bandwidth. Two types of reflectarray antennas operating at X-band frequency with a linear polarization are considered in this design: concave and flat reflectarray antennas with the diameter of 135 mm. elements which are used in this paper are variable-size patches. The proposed reflectarray antenna (concave) approximately has 25% 3-dB bandwidth which shows an increment in bandwidth about 18% compared to flat reflectarray antenna.
基金The authors extend their appreciation to the Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University for funding this work through Research Group No.RG-21-12-08.
文摘This work provides the design and analysis of a single layer,linearly polarized millimeter wave reflectarray antenna with mutual coupling optimization.Detailed analysis was carried out at 26GHz design frequency using the simulations of the reflectarray unit cells as well as the periodic reflectarray antenna.The simulated results were verified by the scattering parameter and far-fieldmeasurements of the unit cell and periodic arrays,respectively.Aclose agreement between the simulated and measured results was observed in all the cases.Apart from the unit cells and reflectarray,the waveguide and horn antenna were also fabricated to be used in the measurements.The measured scattering parameter results of the proposed circular ring unit cells provided a maximum reflection loss of 2.8 dB with phase errors below 10°.On the other hand,the measured far-field results of the 20×20 reflectarray antenna provided a maximum gain of 26.45 dB with a maximum 3 dB beam width of 12°and 1 dB gain drop bandwidth of 13.1%.The performance demonstrated by the proposed reflectarray antenna makes it a potential candidate to be used in modern-day applications such as 5th Generation(5G)and 6th Generation(6G)communication systems.
文摘Bi-function Compact graphene lens antenna in terahertz (THz) band has been investigated. The array function is switched between two status, reflectarray and/or transmitarray. The tunability of graphene conductivity introduces the bi-function characteristics of a single array structure in the THz band. The design depends on changing the graphene DC biasing voltage to transform the transmitting antenna to reflecting antenna. The compact structure of the antenna array saves the cost and the allocation area for the terahertz communication applications. A 13 × 13 reflectarray/ transmitarray antenna covering an area of 364 × 364 μm<sup>2</sup> is proposed. A dual-beams reflectarray/transmitarray antenna is achieved by rearranging the cell elements of the array successively. Finally, a single structure is used to work as reflectarray and transmitarray antenna at the same time by rearranging the applied voltages between the different pieces of the graphene sheet using chess board arrangement. The phases of the successive unit-cells are kept the same of their locations in the original full array. The radiation characteristics of the array are investigated using the CST Microwave Studio for the bi-function operation.
文摘This paper proposes a low-profile, aperture-shared dual-band bidirectional circularly polarized (CP) antenna. The design incorporates a partially reflective surface (PRS) and a multifunctional transmission-reflection integrated metasurface, enabling the integration of CP Fabry-Pérot cavity antenna (FPCA) and CP folded reflectarray (FRA), while preserving circular polarization purity and delivering high gain performance. In this design, the PRS acts as the reflector for the FRA at 8 GHz, while the multifunctional metasurface serves as the reflector for the FPCA at 8 GHz and provides phase compensation for the FRA at 13 GHz. Consequently, the FPCA and FRA can share the same aperture with high aperture reuse efficiency. The antenna achieves high gain across both frequency bands, with peak gains of 19.4 dBic and 22.8 dBic, respectively, without complex feeding networks. Leveraging the advantage of low focal-length-to-diameter ratio of the FRA, the array’s profile is reduced, with a height-to-diameter ratio of only 0.46.
