Accurate assessment of herbage mass(HM)in pasture is a key to budgeting forage in grazing systems worldwide.Different non-destructive techniques to measuring pasture yield are commented.The methods compared include vi...Accurate assessment of herbage mass(HM)in pasture is a key to budgeting forage in grazing systems worldwide.Different non-destructive techniques to measuring pasture yield are commented.The methods compared include visual estimations,manual and electronic pasture meters and remote sensing.All methods are associated with a moderate to high error,showing that some indirect methods of yield estimation are appropriate under most appropriate because many factors as climate variations,soil certain conditions.In general terms,no method was found as the characteristics,plant phenology,pasture management and species composition must be taken into account to make local calibrations from a general model.Best results were found modifying general methods under local calibrations and under local conditions.In order to give farmers the best method to manage adequately their own grazing systems,researchers must select the most suitable technique considering the scale of operation,the desired accuracy and the resources available.展开更多
As part of an international research project—funded by the European Union—capillary glasses for facades are being developed exploiting storage energy by means of fluids flowing through the capillaries. To meet highe...As part of an international research project—funded by the European Union—capillary glasses for facades are being developed exploiting storage energy by means of fluids flowing through the capillaries. To meet highest visual demands, acrylate adhesives and EVA films are tested as possible bonding materials for the glass setup. Especially non-destructive methods (visual analysis, analysis of birefringent properties and computed tomographic data) are applied to evaluate failure patterns as well as the long-term behavior considering climatic influences. The experimental investigations are presented after different loading periods, providing information of failure developments. In addition, detailed information and scientific findings on the application of computed tomographic analyses are presented.展开更多
This paper first describes the importance of using location specific S-N curves for fatigue damage assessment of existing steel structures. It discusses the existing concepts and methods for developing S-N curves usin...This paper first describes the importance of using location specific S-N curves for fatigue damage assessment of existing steel structures. It discusses the existing concepts and methods for developing S-N curves using empirical formulae and monotonic strength parameters, such as the ultimate tensile strength and hardness. It also discusses relationships among these monotonic parameters. Then it presents formulae for developing hardness-based full range S-N curves for medium strength steels. The formulae are verified using experimental data obtained from both monotonic and cyclic testing. Finally, it describes the advantages of these hardness-based formulae for developing location specific S-N curves as hardness testing is a non-destructive test which can be carried out on specific locations in structures.展开更多
Cemented paste backfill(CPB)is a technology that achieves safe mining by filling the goaf with waste rocks,tailings,and other materials.It is an inevitable choice to deal with the development of deep and highly diffic...Cemented paste backfill(CPB)is a technology that achieves safe mining by filling the goaf with waste rocks,tailings,and other materials.It is an inevitable choice to deal with the development of deep and highly difficult mines and meet the requirements of environmental protection and safety regulations.It promotes the development of a circular economy in mines through the development of lowgrade resources and the resource utilization of waste,and extends the service life of mines.The mass concentration of solid content(abbreviated as“concentration”)is a critical parameter for CPB.However,discrepancies often arise between the on-site measurements and the pre-designed values due to factors such as groundwater inflow and segregation within the goaf,which cannot be evaluated after the solidification of CPB.This paper innovatively provides an in-situ non-destructive approach to identify the real concentration of CPB after curing for certain days using hyperspectral imaging(HSI)technology.Initially,the spectral variation patterns under different concentration conditions were investigated through hyperspectral scanning experiments on CPB samples.The results demonstrate that as the CPB concentration increases from 61wt%to 73wt%,the overall spectral reflectance gradually increases,with two distinct absorption peaks observed at 1407 and 1917 nm.Notably,the reflectance at 1407 nm exhibited a strong linear relationship with the concentration.Subsequently,the K-nearest neighbors(KNN)and support vector machine(SVM)algorithms were employed to classify and identify different concentrations.The study revealed that,with the KNN algorithm,the highest accuracy was achieved when K(number of nearest neighbors)was 1,although this resulted in overfitting.When K=3,the model displayed the optimal balance between accuracy and stability,with an accuracy of 95.03%.In the SVM algorithm,the highest accuracy of 98.24%was attained with parameters C(regularization parameter)=200 and Gamma(kernel coefficient)=10.A comparative analysis of precision,accuracy,and recall further highlighted that the SVM provided superior stability and precision for identifying CPB concentration.Thus,HSI technology offers an effective solution for the in-situ,non-destructive monitoring of CPB concentration,presenting a promising approach for optimizing and controlling CPB characteristic parameters.展开更多
In situ density and moisture content of asphalt pavement are essential controlling parameters that require accurate measurement for quality control and quality assurance purposes.The ground-penetrating radar(GPR)techn...In situ density and moisture content of asphalt pavement are essential controlling parameters that require accurate measurement for quality control and quality assurance purposes.The ground-penetrating radar(GPR)technique could provide non-destructive,non-contact,and full-coverage estimations of pavement density and moisture content.However,the technical readiness and drawbacks,including prediction models,signal processing algorithms,and testing hardware,remain unclear for agencies and construction practitioners,impeding large-scale implementations.This paper aims to provide a thorough review of the theoretical background and current practices of using GPR for non-destructive measurements of asphalt pavement density and moisture content during construction,thereby allowing for real-time correction of over-or under-compaction on site.The principles and applications of GPR-based density and moisture content prediction models were comprehensively summarized.Their strengths and limitations were discussed.Cutting-edge GPR equipment suitable for such applications was introduced,including their system components,application scenarios,and inherent limitations.Factors affecting prediction accuracy were analyzed.Advanced signal processing algorithms were discussed in the end,along with the in-place calibration procedure for aggregate dielectric constants.The reviewed technique could be a guiding tool for real-time monitoring of asphalt pavement density and moisture content using GPR,offering practical insights for future development and standardized deployment in construction quality management.展开更多
X-rays are widely used in the non-destructive testing(NDT)of electrical equipment.Radio frequency(RF)electron linear accelerators can generate MeV high-energy X-rays with strong penetrating ability;however,the system ...X-rays are widely used in the non-destructive testing(NDT)of electrical equipment.Radio frequency(RF)electron linear accelerators can generate MeV high-energy X-rays with strong penetrating ability;however,the system generally has a large scale,which is not suitable for on-site testing.Compared with the S-band(S-linac)at the same stage of beam energy,the accelerator working in the X-band(X-linac)can compress the facility scale by over 2/3 in the longitudinal direction,which is convenient for the on-site NDT of electrical equipment.To address the beam quality and design complexity simultaneously,the non-dominated sorting genetic algorithmⅡ(NSGA-Ⅱ),which is a multi-objective genetic algorithm(MOGA),was developed to optimize the cavity chain design of the X-linac.Additionally,the designs of the focusing coils,electron gun,and RF couplers,which are other key components of the X-linac,were introduced in this context.In particular,the focusing coil distributions were optimized using a genetic algorithm.Furthermore,after designing such key components,PARMELA software was adopted to perform beam dynamics calculations with the optimized accelerating fields and magnetic fields.The results show that the beam performance was obtained with a capture ratio of more than 90%,an energy spread of less than 10%,and an average energy of approximately 3 MeV.The design and simulation results indicate that the proposed NSGAⅡ-based approach is feasible for X-linac accelerator design.Furthermore,it can be generalized as a universal technique for industrial electron linear accelerators provided that specific optimization objectives and constraints are set according to different application scenarios and requirements.展开更多
Non-destructive testing (NDT) of structures is one of the most important tasksof the proper maintenance and diagnosis of machines and constructions structuralcondition. NDT methods contribute to the damage tolerance p...Non-destructive testing (NDT) of structures is one of the most important tasksof the proper maintenance and diagnosis of machines and constructions structuralcondition. NDT methods contribute to the damage tolerance philosophy used in theaircraft design methodology as well as many other operation and maintenance programsof machinery and constructions. The following study is focusing on overviewing animportant group of NDT methods: the optical and other ones, which found broadapplicability in scientific and industrial studies nowadays. The paper discusses theselected most widely applicable methods, namely, visual testing, ultrasonic testing,radiographic testing, infrared thermography as well as electronic speckle patterninterferometry and shearographic testing. Besides the basic principles of testing usingthese methods, their potential applications in various industrial and technologicalbranches are broadly discussed. The analysis as categorization of the NDT methodsprovided in this paper may help in selection of such methods in diagnosis of varioustypes of structures and defects and damage occurring in these structures.展开更多
Aiming at the problems of low reliability and complex operation of traditional coin-tap test of composite material,this paper introduces the grey system theory and achieves better performance.The response signals of c...Aiming at the problems of low reliability and complex operation of traditional coin-tap test of composite material,this paper introduces the grey system theory and achieves better performance.The response signals of coin-tap are classified through the grey clustering based on relation analysis,and corresponding improvements are made to the calculation method of the relation degree of nearness.First,the time history of acceleration is taken as the system behavior sequence.The improved correlation calculation method is used to solve the relation degree of nearness between the sequences,and the matrix of degree of grey relation is constructed based on this.Then,the sequence groups are summarized through the matrix,and the response signals of coin-tap are qualitatively classified according to the location of the reference sequence.Finally,the defect detection of composite materials is completed without pre-testing.The test results show that the accuracy of the coin-tap test based on improved grey clustering reaches 100%,which simplifies the operation steps while ensuring the reliability of the coin-tap test results.展开更多
This study was undertaken to investigate the feasibility of near-infrared(NIR) hyperspectral imaging(1 000–2 500 nm) for non-destructive and quantitative prediction of protein content in peanut kernels. Partial least...This study was undertaken to investigate the feasibility of near-infrared(NIR) hyperspectral imaging(1 000–2 500 nm) for non-destructive and quantitative prediction of protein content in peanut kernels. Partial least squares regression(PLSR) calibration model was established between the spectral data extracted from the hyperspectral images and the reference measured protein content values, with the coefficient of determination of prediction(R_P^2) of 0.885 and root mean square error of prediction(RMSEP) of 0.465%.Regression coefficients(RC) from PLSR analysis were used to identify the most essential wavelengths that had the greatest influence on changes in the protein content. Eight optimal wavelengths were selected by RC and its corresponding simplified RC-PLSR prediction model was also obtained, showing better performance with a higher R_P^2 of 0.870 and a lower RMSEP of 0.494%. The results indicate that hyperspectral imaging with PLSR analysis can be used as a rapid and non-destructive method for predicting protein content in peanut.展开更多
The performance and price of copper-based micro linear products are determined by the diameter uniformity.How to accurately detect the wire diameter of long-length copper based micro linear products without cutting or...The performance and price of copper-based micro linear products are determined by the diameter uniformity.How to accurately detect the wire diameter of long-length copper based micro linear products without cutting or damage has always been a technical concern for production enterprises.Herein,a novel approach was developed for nondestructive detection of the average diameter at any given segment of a long copper wire by assessing the adsorption capacity of arginine on its surface.The amount of adsorbent on the surface of the copper wire exhibits a positive correlation with the area,which can be detected by extractive electrospray ionization mass spectrometry(EESI-MS)after online elution with ammonia.The experimental results demonstrated that the analysis can be completed within 15 min,with a good linear relationship between copper wires with different diameters and the adsorption capacity of arginine.The linear correlation coefficient R2was 0.995,the relative standard deviation was 1.10%-2.81%,and the detection limit reached 2.5μm(length of segment=4 cm),showing potential applications for facile measurement of the average diameter of various metal wires.展开更多
During the storage of composite propellants, the migration of plasticizers and other unbonded additives at the interfaces of liner adhesives has garnered significant attention in understanding liner failure mechanisms...During the storage of composite propellants, the migration of plasticizers and other unbonded additives at the interfaces of liner adhesives has garnered significant attention in understanding liner failure mechanisms, aging processes, and safety performance. However, there is currently no non-destructive and quantitative detection method for migration of plasticizers in propellant liner. In this study, we developed a HTPB sensing liner by incorporating conductive fillers-namely carbon black(CB), carbon nanotubes(CNTs), and graphene nanoplatelets(GNP)-into the HTPB matrix. The synergistic interaction between CNTs and GNP facilitates the formation of a tunneling conductive network that imparts electrical conductivity to the HTPB liner. To elucidate the functional relationship between conductivity and nitroglycerin(NG) migration, we applied the HTPB sensing liner onto double base propellant surfaces and measured both the conductivity of the sensing layer and NG migration during a 71°C accelerated aging experiment. The results shows that when CNTs/GNP content reaches 3wt%, there is an exponential correlation between conductivity and NG migration with a fitting degree of 0.9652;the average response sensitivity of ΔR/R0 relative to NG migration is calculated as 41.69, with an average deviation of merely5.67% between NG migrations derived from conductivity fittings compared to those obtained via TGA testing results. Overall, this sensing liner exhibits excellent capabilities for detecting NG migration nondestructively and quantitatively while offering a novel approach for assessing interfacial component migrations as well as debonding defects in propellants-a promising avenue for future self-monitoring strategies regarding propellant integrity.展开更多
Metal foils have emerged as one of the promising materials for anode-free batteries due to their high energy density and scalability in production.The unclear lithium plating/stripping kinetics of metal foil current c...Metal foils have emerged as one of the promising materials for anode-free batteries due to their high energy density and scalability in production.The unclear lithium plating/stripping kinetics of metal foil current collectors in anode-free batteries was addressed by using the non-destructive distribution of relaxation times(DRT)analysis to systematically investigate the lithium transport behavior of 14 metal foils and its correlation with electrochemical performance.By integrating energy-dispersive spectro scopy(EDS),cyclic voltammetry(CV),and galvanostatic testing,the exceptional properties of indium(In),tin(Sn),and silver(Ag)were revealed:the Li-In alloying reaction exhibits high reversibility,Li-Sn alloys demonstrate outstanding cycling stability,and the Li-Ag solid-solution mechanism provides an ideal lithium deposition interface on the silver substrate.The DRT separates the polarization internal resistance of lithium ions passing through the SEI layer(R_(sei),τ2)and the polarization internal resistance of lithium ions undergoing charge transfer reaction at the electrolyte/electrode interface(R_(ct),τ3)by decoupling the electrochemical impedance spectroscopy(EIS).For the first time,the correlation betweenτ2,τ3,and the cycle life/Coulombic efficiency of alloy/solid-solution metals was established,while non-alloy metals are not suitable for this method due to differences in lithium deposition mechanisms.This study not only illuminates the structure-property relationship governing the lithium kinetics of metal foil electrodes but also provides a novel non-destructive analytical strategy and theoretical guidance for the rational design of stable anodes in high-energy-density batteries,facilitating the efficient screening and optimization of anode-free battery.展开更多
The growing importance of maintaining and extending the functional lifespan of reinforced concrete structures has resulted in an increased emphasis on non-destructive testing techniques as essential tools for evaluati...The growing importance of maintaining and extending the functional lifespan of reinforced concrete structures has resulted in an increased emphasis on non-destructive testing techniques as essential tools for evaluating structural conditions.Non-destructive testing procedures offer a notable benefit in assessing the uniformity,homogeneity,ability to withstand compression,durability,and degree of corrosion in reinforcing bars within reinforced concrete structures.This study aimed to evaluate the existing condition of partially constructed residential buildings in Rewari district,located in the state of Haryana.The reinforced concrete structure of the building had been completed eight years ago,however,the project was abruptly stopped.Prior to recommencing the construction,it is important to assess the present state of the structure in order to evaluate the deterioration in Reinforced Cement Concrete(RCC).The building’s state was evaluated by visually inspecting the building,conducting on-site examinations,and analyzing samples in a laboratory.The findings emphasize the assessment of the robustness and durability of concrete to ascertain the degree of deterioration and degradation in the structure.The study incorporates visual inspection,and non-destructive evaluation utilizing different instruments to evaluate the corrosion condition of reinforcing bars.In addition,selected RCC columns,beams,and slabs undergo chemical testing.It has been observed that the strength results and chemical results were within permissible limits.展开更多
Nonlinear Rossby waves are used to describe typical wave phenomena in large-scale atmosphere andocean.Owing to the nonlinearity of the involved problems,the weakly nonlinear method,ie the derivative ex-pansion method,...Nonlinear Rossby waves are used to describe typical wave phenomena in large-scale atmosphere andocean.Owing to the nonlinearity of the involved problems,the weakly nonlinear method,ie the derivative ex-pansion method,was mainly used to investigate Rossby waves under the combined effects of the generalizedβ-effect and the basic flow effect.The derivative expansion method has the advantage of capturing the multi-scalecharacteristics of wave processes simultaneously.In the case where the perturbation expansion is independentof secular terms,the nonlinear equations describing the amplitude evolution of nonlinear waves were derived,such as the Korteweg-de Vries equation,the Boussinesq equation and Zakharov-Kuznetsov equation.Both quali-tative and quantitative analyses indicate that the generalizedβ-effect is the key factor inducing the evolution ofRossby solitary waves.展开更多
SiC/Al-based composite foams were prepared by a two-step foaming method.The influence of the SiC content and its distribution uniformity on the foaming stability,cell structure,and mechanical properties of the aluminu...SiC/Al-based composite foams were prepared by a two-step foaming method.The influence of the SiC content and its distribution uniformity on the foaming stability,cell structure,and mechanical properties of the aluminum foams was investigated.The macro/micro-features of the aluminum foams were characterized and analyzed.Results demonstrate that an appropriate increase in SiC content and the uniform distribution of SiC can improve the foaming stability,optimize the cell diameter and cell wall thickness,ameliorate the cell distribution,and enhance the hardness and compressive strength of the aluminum foams.However,either insufficient or excessive SiC leads to uneven distribution of SiC particles,which is unfavorable to foaming stability and good cell structure formation.With 6wt%SiC,both the foaming stability and cell structure of the aluminum foam reach the optimal state,resulting in the highest compressive strength and optimal energy absorption capacity.展开更多
In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to ...In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.展开更多
This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SE...This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SEM),which is used to simulate low-frequency ground motion(f<1 Hz)by incorporating an innovative efficient discontinuous Galerkin(DG)method for grid division to accurately model basin sedimentary layers at reduced costs.It also introduces a comprehensive hybrid source model for high-frequency random scattering and a nonlinear analysis module for basin sedimentary layers.Deterministic outcomes are combined with modified three-dimensional stochastic finite fault method(3D-EXSIM)simulations of high-frequency ground motion(f>1 Hz).A fourth-order Butterworth filter with zero phase shift is employed for time-domain filtering of low-and high-frequency time series at a crossover frequency of 1 Hz,merging the low and high-frequency ground motions into a broadband time series.Taking an Ms 6.8 Luding earthquake,as an example,this hybrid method was used for a rapid and efficient simulation analysis of broadband ground motion in the region.The accuracy and efficiency of this hybrid method were verified through comparisons with actually observed station data and empirical attenuation curves.Deterministic method simulation results revealed the effects of mountainous topography,basin effects,nonlinear effects within the basin’s sedimentary layers,and a coupling interaction between the basin and the mountains.The findings are consistent with similar studies,showing that near-fault sedimentary basins significantly focus and amplify strong ground motion,and the soil’s nonlinear behavior in the basin influences ground motion to varying extents at different distances from the fault.The mountainous topography impacts the basin’s response to ground motion,leading to barrier effects.This research provides a scientific foundation for seismic zoning,urban planning,and seismic design in nearfault mountain basin regions.展开更多
This study systematically conducted preparation optimization and performance investigations on Co-modified Ce/TiO_(2) catalysts,with a focus on examining how preparation methods and Co loading regulate the catalyst’s...This study systematically conducted preparation optimization and performance investigations on Co-modified Ce/TiO_(2) catalysts,with a focus on examining how preparation methods and Co loading regulate the catalyst’s low-temperature denitrification activity.After identifying optimal preparation parameters via condition screening,multiple characterization techniques-including BET,XRD,XPS,H_(2)-TPR and in situ DRIFTS-were employed to deeply analyze the catalyst’s physicochemical properties and reaction mechanism.Results demonstrated that compared to the impregnation and co-precipitation methods,the Ce-Co_(0.025)/TiO_(2)-SG catalyst(prepared by the sol-gel method with a Co/Ti mass ratio of 0.025)exhibited significantly superior denitrification activity:NO conversion remained stably above 95%in the 225−350℃ temperature range,and it displayed high N_(2) selectivity.Characterization analysis revealed that abundant surface oxygen vacancies,a high proportion of Ce^(3+) species,and prominent acidic sites collectively contributed to enhancing its low-temperature denitrification performance.This work provides reference value for the development of highly efficient low-temperature denitrification catalysts.展开更多
[Objectives]This study was conducted to establish a quantitative assessment method for the textural quality of chieh-qua fruit.[Methods]Using two modes of a texture analyzer,namely TPA(texture profile analysis)and pun...[Objectives]This study was conducted to establish a quantitative assessment method for the textural quality of chieh-qua fruit.[Methods]Using two modes of a texture analyzer,namely TPA(texture profile analysis)and puncture,the index data of the fruit were obtained by setting different trigger forces,deformation levels,test speeds,as well as puncture speeds and puncture depths.The data included TPA hardness,adhesiveness,springiness,cohesiveness,gumminess,chewiness,resilience,as well as skin hardness,skin toughness,flesh hardness,fracturability,and compactness.[Results]Different deformation levels had a significant impact on all parameters.Hardness,adhesiveness,gumminess and chewiness showed a trend of first increasing and then decreasing with the deformation level increasing.When the deformation level was 30%,the adhesiveness,gumminess and chewiness reached their maximum values.When the deformation level was 50%,TPA hardness reached its maximum.When the compression speed was 3 mm/s,the measured values of TPA hardness,adhesiveness,chewiness,and resilience were at their maximums.The skin hardness varied significantly under different trigger forces.When the trigger force was 15 g,the skin hardness reached a maximum value of 944.63 g,and the skin toughness,flesh hardness,fracturability,and compactness also reach their maximum values respectively.When the puncture depth was 12 mm,the flesh hardness and skin toughness reached their maximums of 682.51 g and 1.82 mm,respectively.In the TPA mode,the flesh hardness of chieh-qua showed an extremely significant negative correlation with springiness,cohesiveness,and resilience(P<0.01).The fruit fracturability detected by puncture had an extremely significant positive correlation with compactness(P<0.01).[Conclusions]The evaluation method for measuring chieh-qua texture by combining TPA and the puncture mode could accurately and quantitatively reflect the differences in the flesh texture quality of chieh-qua.The optimal parameters for texture measurement of chieh-qua fruit were determined as a 15 g trigger force with 50%deformation and a 3 mm/s compression speed in TPA mode,and a 15 g trigger force with a 12 mm puncture depth in puncture mode.Puncture speed was found to have no significant effect on the texture indices of chieh-qua.展开更多
The testing of large structures is limited by high costs and long cycles, making scaling methods an attractive solution. However, the scaling process of elastic rings introduces complexities in multi-parameter geometr...The testing of large structures is limited by high costs and long cycles, making scaling methods an attractive solution. However, the scaling process of elastic rings introduces complexities in multi-parameter geometric distortions, leading to a diminution in the predictive accuracy of the distorted similitude. To address this challenge, this study formulates a novel set of scaling laws, tailored to account for the intricate geometric distortions associated with elastic rings. The proposed scaling laws are formulated based on the intrinsic deformation characteristics of elastic rings, rather than the traditional systemic governing equations. Numerical and experimental cases are conducted to assess the efficacy and precision of the proposed scaling laws, and the obtained results are compared with those achieved by traditional methods. The outcomes demonstrate that the scaling laws put forth by this study significantly enhance the predictive capabilities for deformations of elastic rings.展开更多
文摘Accurate assessment of herbage mass(HM)in pasture is a key to budgeting forage in grazing systems worldwide.Different non-destructive techniques to measuring pasture yield are commented.The methods compared include visual estimations,manual and electronic pasture meters and remote sensing.All methods are associated with a moderate to high error,showing that some indirect methods of yield estimation are appropriate under most appropriate because many factors as climate variations,soil certain conditions.In general terms,no method was found as the characteristics,plant phenology,pasture management and species composition must be taken into account to make local calibrations from a general model.Best results were found modifying general methods under local calibrations and under local conditions.In order to give farmers the best method to manage adequately their own grazing systems,researchers must select the most suitable technique considering the scale of operation,the desired accuracy and the resources available.
文摘As part of an international research project—funded by the European Union—capillary glasses for facades are being developed exploiting storage energy by means of fluids flowing through the capillaries. To meet highest visual demands, acrylate adhesives and EVA films are tested as possible bonding materials for the glass setup. Especially non-destructive methods (visual analysis, analysis of birefringent properties and computed tomographic data) are applied to evaluate failure patterns as well as the long-term behavior considering climatic influences. The experimental investigations are presented after different loading periods, providing information of failure developments. In addition, detailed information and scientific findings on the application of computed tomographic analyses are presented.
文摘This paper first describes the importance of using location specific S-N curves for fatigue damage assessment of existing steel structures. It discusses the existing concepts and methods for developing S-N curves using empirical formulae and monotonic strength parameters, such as the ultimate tensile strength and hardness. It also discusses relationships among these monotonic parameters. Then it presents formulae for developing hardness-based full range S-N curves for medium strength steels. The formulae are verified using experimental data obtained from both monotonic and cyclic testing. Finally, it describes the advantages of these hardness-based formulae for developing location specific S-N curves as hardness testing is a non-destructive test which can be carried out on specific locations in structures.
基金funded by the National Natural Science Foundation of China(Nos.52474165 and 52522404)。
文摘Cemented paste backfill(CPB)is a technology that achieves safe mining by filling the goaf with waste rocks,tailings,and other materials.It is an inevitable choice to deal with the development of deep and highly difficult mines and meet the requirements of environmental protection and safety regulations.It promotes the development of a circular economy in mines through the development of lowgrade resources and the resource utilization of waste,and extends the service life of mines.The mass concentration of solid content(abbreviated as“concentration”)is a critical parameter for CPB.However,discrepancies often arise between the on-site measurements and the pre-designed values due to factors such as groundwater inflow and segregation within the goaf,which cannot be evaluated after the solidification of CPB.This paper innovatively provides an in-situ non-destructive approach to identify the real concentration of CPB after curing for certain days using hyperspectral imaging(HSI)technology.Initially,the spectral variation patterns under different concentration conditions were investigated through hyperspectral scanning experiments on CPB samples.The results demonstrate that as the CPB concentration increases from 61wt%to 73wt%,the overall spectral reflectance gradually increases,with two distinct absorption peaks observed at 1407 and 1917 nm.Notably,the reflectance at 1407 nm exhibited a strong linear relationship with the concentration.Subsequently,the K-nearest neighbors(KNN)and support vector machine(SVM)algorithms were employed to classify and identify different concentrations.The study revealed that,with the KNN algorithm,the highest accuracy was achieved when K(number of nearest neighbors)was 1,although this resulted in overfitting.When K=3,the model displayed the optimal balance between accuracy and stability,with an accuracy of 95.03%.In the SVM algorithm,the highest accuracy of 98.24%was attained with parameters C(regularization parameter)=200 and Gamma(kernel coefficient)=10.A comparative analysis of precision,accuracy,and recall further highlighted that the SVM provided superior stability and precision for identifying CPB concentration.Thus,HSI technology offers an effective solution for the in-situ,non-destructive monitoring of CPB concentration,presenting a promising approach for optimizing and controlling CPB characteristic parameters.
基金supported by the National Key R&D Program of China(2024YFB2605500)the National Natural Science Foundation of China(52308444)the Fundamental Research Funds for the Central Universities(2242024K40036).
文摘In situ density and moisture content of asphalt pavement are essential controlling parameters that require accurate measurement for quality control and quality assurance purposes.The ground-penetrating radar(GPR)technique could provide non-destructive,non-contact,and full-coverage estimations of pavement density and moisture content.However,the technical readiness and drawbacks,including prediction models,signal processing algorithms,and testing hardware,remain unclear for agencies and construction practitioners,impeding large-scale implementations.This paper aims to provide a thorough review of the theoretical background and current practices of using GPR for non-destructive measurements of asphalt pavement density and moisture content during construction,thereby allowing for real-time correction of over-or under-compaction on site.The principles and applications of GPR-based density and moisture content prediction models were comprehensively summarized.Their strengths and limitations were discussed.Cutting-edge GPR equipment suitable for such applications was introduced,including their system components,application scenarios,and inherent limitations.Factors affecting prediction accuracy were analyzed.Advanced signal processing algorithms were discussed in the end,along with the in-place calibration procedure for aggregate dielectric constants.The reviewed technique could be a guiding tool for real-time monitoring of asphalt pavement density and moisture content using GPR,offering practical insights for future development and standardized deployment in construction quality management.
基金supported by the National Natural Science Foundation of China(Nos.12341501 and 12575164)。
文摘X-rays are widely used in the non-destructive testing(NDT)of electrical equipment.Radio frequency(RF)electron linear accelerators can generate MeV high-energy X-rays with strong penetrating ability;however,the system generally has a large scale,which is not suitable for on-site testing.Compared with the S-band(S-linac)at the same stage of beam energy,the accelerator working in the X-band(X-linac)can compress the facility scale by over 2/3 in the longitudinal direction,which is convenient for the on-site NDT of electrical equipment.To address the beam quality and design complexity simultaneously,the non-dominated sorting genetic algorithmⅡ(NSGA-Ⅱ),which is a multi-objective genetic algorithm(MOGA),was developed to optimize the cavity chain design of the X-linac.Additionally,the designs of the focusing coils,electron gun,and RF couplers,which are other key components of the X-linac,were introduced in this context.In particular,the focusing coil distributions were optimized using a genetic algorithm.Furthermore,after designing such key components,PARMELA software was adopted to perform beam dynamics calculations with the optimized accelerating fields and magnetic fields.The results show that the beam performance was obtained with a capture ratio of more than 90%,an energy spread of less than 10%,and an average energy of approximately 3 MeV.The design and simulation results indicate that the proposed NSGAⅡ-based approach is feasible for X-linac accelerator design.Furthermore,it can be generalized as a universal technique for industrial electron linear accelerators provided that specific optimization objectives and constraints are set according to different application scenarios and requirements.
文摘Non-destructive testing (NDT) of structures is one of the most important tasksof the proper maintenance and diagnosis of machines and constructions structuralcondition. NDT methods contribute to the damage tolerance philosophy used in theaircraft design methodology as well as many other operation and maintenance programsof machinery and constructions. The following study is focusing on overviewing animportant group of NDT methods: the optical and other ones, which found broadapplicability in scientific and industrial studies nowadays. The paper discusses theselected most widely applicable methods, namely, visual testing, ultrasonic testing,radiographic testing, infrared thermography as well as electronic speckle patterninterferometry and shearographic testing. Besides the basic principles of testing usingthese methods, their potential applications in various industrial and technologicalbranches are broadly discussed. The analysis as categorization of the NDT methodsprovided in this paper may help in selection of such methods in diagnosis of varioustypes of structures and defects and damage occurring in these structures.
基金National Key Research and Development Project of China(No.2018YFB1701200)。
文摘Aiming at the problems of low reliability and complex operation of traditional coin-tap test of composite material,this paper introduces the grey system theory and achieves better performance.The response signals of coin-tap are classified through the grey clustering based on relation analysis,and corresponding improvements are made to the calculation method of the relation degree of nearness.First,the time history of acceleration is taken as the system behavior sequence.The improved correlation calculation method is used to solve the relation degree of nearness between the sequences,and the matrix of degree of grey relation is constructed based on this.Then,the sequence groups are summarized through the matrix,and the response signals of coin-tap are qualitatively classified according to the location of the reference sequence.Finally,the defect detection of composite materials is completed without pre-testing.The test results show that the accuracy of the coin-tap test based on improved grey clustering reaches 100%,which simplifies the operation steps while ensuring the reliability of the coin-tap test results.
基金Supported by the Natural Science Foundation of Guangdong Province(2017A030310558)China Postdoctoral Science Foundation(2017M612672)Fundamental Research Funds for the Central Universities(2017MS067)
文摘This study was undertaken to investigate the feasibility of near-infrared(NIR) hyperspectral imaging(1 000–2 500 nm) for non-destructive and quantitative prediction of protein content in peanut kernels. Partial least squares regression(PLSR) calibration model was established between the spectral data extracted from the hyperspectral images and the reference measured protein content values, with the coefficient of determination of prediction(R_P^2) of 0.885 and root mean square error of prediction(RMSEP) of 0.465%.Regression coefficients(RC) from PLSR analysis were used to identify the most essential wavelengths that had the greatest influence on changes in the protein content. Eight optimal wavelengths were selected by RC and its corresponding simplified RC-PLSR prediction model was also obtained, showing better performance with a higher R_P^2 of 0.870 and a lower RMSEP of 0.494%. The results indicate that hyperspectral imaging with PLSR analysis can be used as a rapid and non-destructive method for predicting protein content in peanut.
基金supported by the National Natural Science Foundation of China(No.22422402)National Key Research and Development Program of China(No.2022YFF0705300)Key Research and Development Program of Jiangxi Province(No.20232BBG70004)。
文摘The performance and price of copper-based micro linear products are determined by the diameter uniformity.How to accurately detect the wire diameter of long-length copper based micro linear products without cutting or damage has always been a technical concern for production enterprises.Herein,a novel approach was developed for nondestructive detection of the average diameter at any given segment of a long copper wire by assessing the adsorption capacity of arginine on its surface.The amount of adsorbent on the surface of the copper wire exhibits a positive correlation with the area,which can be detected by extractive electrospray ionization mass spectrometry(EESI-MS)after online elution with ammonia.The experimental results demonstrated that the analysis can be completed within 15 min,with a good linear relationship between copper wires with different diameters and the adsorption capacity of arginine.The linear correlation coefficient R2was 0.995,the relative standard deviation was 1.10%-2.81%,and the detection limit reached 2.5μm(length of segment=4 cm),showing potential applications for facile measurement of the average diameter of various metal wires.
基金funded by Zhijian Laboratory Open Fund,Rocket Force University of Engineering(Grant No.2023-ZJSYS-KF01-03).
文摘During the storage of composite propellants, the migration of plasticizers and other unbonded additives at the interfaces of liner adhesives has garnered significant attention in understanding liner failure mechanisms, aging processes, and safety performance. However, there is currently no non-destructive and quantitative detection method for migration of plasticizers in propellant liner. In this study, we developed a HTPB sensing liner by incorporating conductive fillers-namely carbon black(CB), carbon nanotubes(CNTs), and graphene nanoplatelets(GNP)-into the HTPB matrix. The synergistic interaction between CNTs and GNP facilitates the formation of a tunneling conductive network that imparts electrical conductivity to the HTPB liner. To elucidate the functional relationship between conductivity and nitroglycerin(NG) migration, we applied the HTPB sensing liner onto double base propellant surfaces and measured both the conductivity of the sensing layer and NG migration during a 71°C accelerated aging experiment. The results shows that when CNTs/GNP content reaches 3wt%, there is an exponential correlation between conductivity and NG migration with a fitting degree of 0.9652;the average response sensitivity of ΔR/R0 relative to NG migration is calculated as 41.69, with an average deviation of merely5.67% between NG migrations derived from conductivity fittings compared to those obtained via TGA testing results. Overall, this sensing liner exhibits excellent capabilities for detecting NG migration nondestructively and quantitatively while offering a novel approach for assessing interfacial component migrations as well as debonding defects in propellants-a promising avenue for future self-monitoring strategies regarding propellant integrity.
基金supported by the Quzhou Science and Technology Bureau Project(2023D023,2023D030,2023D002,and2024D028)the Joint Funds of the Zhejiang Provincial Natural Science Foundation of China(LZY23B030002)+3 种基金the Shijiazhuang Shangtai Technology Co.,Ltd.Hebei Provincial Department of Science and Technology(24291101Z)the International Cooperation Projects of Sichuan Provincial Department of Science and Technology(2021YFH0126)the Sichuan Provincial Science and Technology Department's key research project(2023YFG0203)。
文摘Metal foils have emerged as one of the promising materials for anode-free batteries due to their high energy density and scalability in production.The unclear lithium plating/stripping kinetics of metal foil current collectors in anode-free batteries was addressed by using the non-destructive distribution of relaxation times(DRT)analysis to systematically investigate the lithium transport behavior of 14 metal foils and its correlation with electrochemical performance.By integrating energy-dispersive spectro scopy(EDS),cyclic voltammetry(CV),and galvanostatic testing,the exceptional properties of indium(In),tin(Sn),and silver(Ag)were revealed:the Li-In alloying reaction exhibits high reversibility,Li-Sn alloys demonstrate outstanding cycling stability,and the Li-Ag solid-solution mechanism provides an ideal lithium deposition interface on the silver substrate.The DRT separates the polarization internal resistance of lithium ions passing through the SEI layer(R_(sei),τ2)and the polarization internal resistance of lithium ions undergoing charge transfer reaction at the electrolyte/electrode interface(R_(ct),τ3)by decoupling the electrochemical impedance spectroscopy(EIS).For the first time,the correlation betweenτ2,τ3,and the cycle life/Coulombic efficiency of alloy/solid-solution metals was established,while non-alloy metals are not suitable for this method due to differences in lithium deposition mechanisms.This study not only illuminates the structure-property relationship governing the lithium kinetics of metal foil electrodes but also provides a novel non-destructive analytical strategy and theoretical guidance for the rational design of stable anodes in high-energy-density batteries,facilitating the efficient screening and optimization of anode-free battery.
文摘The growing importance of maintaining and extending the functional lifespan of reinforced concrete structures has resulted in an increased emphasis on non-destructive testing techniques as essential tools for evaluating structural conditions.Non-destructive testing procedures offer a notable benefit in assessing the uniformity,homogeneity,ability to withstand compression,durability,and degree of corrosion in reinforcing bars within reinforced concrete structures.This study aimed to evaluate the existing condition of partially constructed residential buildings in Rewari district,located in the state of Haryana.The reinforced concrete structure of the building had been completed eight years ago,however,the project was abruptly stopped.Prior to recommencing the construction,it is important to assess the present state of the structure in order to evaluate the deterioration in Reinforced Cement Concrete(RCC).The building’s state was evaluated by visually inspecting the building,conducting on-site examinations,and analyzing samples in a laboratory.The findings emphasize the assessment of the robustness and durability of concrete to ascertain the degree of deterioration and degradation in the structure.The study incorporates visual inspection,and non-destructive evaluation utilizing different instruments to evaluate the corrosion condition of reinforcing bars.In addition,selected RCC columns,beams,and slabs undergo chemical testing.It has been observed that the strength results and chemical results were within permissible limits.
文摘Nonlinear Rossby waves are used to describe typical wave phenomena in large-scale atmosphere andocean.Owing to the nonlinearity of the involved problems,the weakly nonlinear method,ie the derivative ex-pansion method,was mainly used to investigate Rossby waves under the combined effects of the generalizedβ-effect and the basic flow effect.The derivative expansion method has the advantage of capturing the multi-scalecharacteristics of wave processes simultaneously.In the case where the perturbation expansion is independentof secular terms,the nonlinear equations describing the amplitude evolution of nonlinear waves were derived,such as the Korteweg-de Vries equation,the Boussinesq equation and Zakharov-Kuznetsov equation.Both quali-tative and quantitative analyses indicate that the generalizedβ-effect is the key factor inducing the evolution ofRossby solitary waves.
基金Doctoral Startup Fund(20192066,20212028)Laijin Excellent Doctoral Fund(20202021)+1 种基金Scientific and Technological Innovation of Colleges and Universities in Shanxi Province(2020L0342)Fundamental Research Program of Shanxi Province(202303021222178)。
文摘SiC/Al-based composite foams were prepared by a two-step foaming method.The influence of the SiC content and its distribution uniformity on the foaming stability,cell structure,and mechanical properties of the aluminum foams was investigated.The macro/micro-features of the aluminum foams were characterized and analyzed.Results demonstrate that an appropriate increase in SiC content and the uniform distribution of SiC can improve the foaming stability,optimize the cell diameter and cell wall thickness,ameliorate the cell distribution,and enhance the hardness and compressive strength of the aluminum foams.However,either insufficient or excessive SiC leads to uneven distribution of SiC particles,which is unfavorable to foaming stability and good cell structure formation.With 6wt%SiC,both the foaming stability and cell structure of the aluminum foam reach the optimal state,resulting in the highest compressive strength and optimal energy absorption capacity.
基金Supported in part by Natural Science Foundation of Guangxi(2023GXNSFAA026246)in part by the Central Government's Guide to Local Science and Technology Development Fund(GuikeZY23055044)in part by the National Natural Science Foundation of China(62363003)。
文摘In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.
基金National Natural Science Foundation of China under Grant Nos.U2139208 and 52278516Key Laboratory of Earthquake Engineering and Engineering Vibration,China Earthquake Administration under Grant No.2024D15Key Laboratory of Soft Soil Characteristic and Engineering Environment,Tianjin Chengjian University under Grant No.2022SCEEKL003。
文摘This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SEM),which is used to simulate low-frequency ground motion(f<1 Hz)by incorporating an innovative efficient discontinuous Galerkin(DG)method for grid division to accurately model basin sedimentary layers at reduced costs.It also introduces a comprehensive hybrid source model for high-frequency random scattering and a nonlinear analysis module for basin sedimentary layers.Deterministic outcomes are combined with modified three-dimensional stochastic finite fault method(3D-EXSIM)simulations of high-frequency ground motion(f>1 Hz).A fourth-order Butterworth filter with zero phase shift is employed for time-domain filtering of low-and high-frequency time series at a crossover frequency of 1 Hz,merging the low and high-frequency ground motions into a broadband time series.Taking an Ms 6.8 Luding earthquake,as an example,this hybrid method was used for a rapid and efficient simulation analysis of broadband ground motion in the region.The accuracy and efficiency of this hybrid method were verified through comparisons with actually observed station data and empirical attenuation curves.Deterministic method simulation results revealed the effects of mountainous topography,basin effects,nonlinear effects within the basin’s sedimentary layers,and a coupling interaction between the basin and the mountains.The findings are consistent with similar studies,showing that near-fault sedimentary basins significantly focus and amplify strong ground motion,and the soil’s nonlinear behavior in the basin influences ground motion to varying extents at different distances from the fault.The mountainous topography impacts the basin’s response to ground motion,leading to barrier effects.This research provides a scientific foundation for seismic zoning,urban planning,and seismic design in nearfault mountain basin regions.
基金Supported by the National Key Research and Development Program of China (2023YFB4102903)。
文摘This study systematically conducted preparation optimization and performance investigations on Co-modified Ce/TiO_(2) catalysts,with a focus on examining how preparation methods and Co loading regulate the catalyst’s low-temperature denitrification activity.After identifying optimal preparation parameters via condition screening,multiple characterization techniques-including BET,XRD,XPS,H_(2)-TPR and in situ DRIFTS-were employed to deeply analyze the catalyst’s physicochemical properties and reaction mechanism.Results demonstrated that compared to the impregnation and co-precipitation methods,the Ce-Co_(0.025)/TiO_(2)-SG catalyst(prepared by the sol-gel method with a Co/Ti mass ratio of 0.025)exhibited significantly superior denitrification activity:NO conversion remained stably above 95%in the 225−350℃ temperature range,and it displayed high N_(2) selectivity.Characterization analysis revealed that abundant surface oxygen vacancies,a high proportion of Ce^(3+) species,and prominent acidic sites collectively contributed to enhancing its low-temperature denitrification performance.This work provides reference value for the development of highly efficient low-temperature denitrification catalysts.
基金Supported by Shanghai Agriculture Applied Technology Development Program (Grant No.T20220120).
文摘[Objectives]This study was conducted to establish a quantitative assessment method for the textural quality of chieh-qua fruit.[Methods]Using two modes of a texture analyzer,namely TPA(texture profile analysis)and puncture,the index data of the fruit were obtained by setting different trigger forces,deformation levels,test speeds,as well as puncture speeds and puncture depths.The data included TPA hardness,adhesiveness,springiness,cohesiveness,gumminess,chewiness,resilience,as well as skin hardness,skin toughness,flesh hardness,fracturability,and compactness.[Results]Different deformation levels had a significant impact on all parameters.Hardness,adhesiveness,gumminess and chewiness showed a trend of first increasing and then decreasing with the deformation level increasing.When the deformation level was 30%,the adhesiveness,gumminess and chewiness reached their maximum values.When the deformation level was 50%,TPA hardness reached its maximum.When the compression speed was 3 mm/s,the measured values of TPA hardness,adhesiveness,chewiness,and resilience were at their maximums.The skin hardness varied significantly under different trigger forces.When the trigger force was 15 g,the skin hardness reached a maximum value of 944.63 g,and the skin toughness,flesh hardness,fracturability,and compactness also reach their maximum values respectively.When the puncture depth was 12 mm,the flesh hardness and skin toughness reached their maximums of 682.51 g and 1.82 mm,respectively.In the TPA mode,the flesh hardness of chieh-qua showed an extremely significant negative correlation with springiness,cohesiveness,and resilience(P<0.01).The fruit fracturability detected by puncture had an extremely significant positive correlation with compactness(P<0.01).[Conclusions]The evaluation method for measuring chieh-qua texture by combining TPA and the puncture mode could accurately and quantitatively reflect the differences in the flesh texture quality of chieh-qua.The optimal parameters for texture measurement of chieh-qua fruit were determined as a 15 g trigger force with 50%deformation and a 3 mm/s compression speed in TPA mode,and a 15 g trigger force with a 12 mm puncture depth in puncture mode.Puncture speed was found to have no significant effect on the texture indices of chieh-qua.
基金Project supported by the National Natural Science Foundation of China(Nos.52405095,12272089,and 92360305)the Guangdong Basic and Applied Basic Research Foundation of China(No.2023A1515110557)+4 种基金the Natural Science Foundation of Liaoning Province of China(No.2023-BSBA-102)the Open Fund of National Key Laboratory of Particle Transport and Separation Technology of China(No.WZKF-2024-6)the Open Project of Guangxi Key Laboratory of Automobile Components and Vehicle Technology of China(Nos.2024GKLACVTKF07 and 2024GKLACVTKF06)the Basic Research Projects of Liaoning Provincial Department of Education of China(No.JYTQN2023162)the Fundamental Research Funds for the Central Universities of China(No.N2403022)。
文摘The testing of large structures is limited by high costs and long cycles, making scaling methods an attractive solution. However, the scaling process of elastic rings introduces complexities in multi-parameter geometric distortions, leading to a diminution in the predictive accuracy of the distorted similitude. To address this challenge, this study formulates a novel set of scaling laws, tailored to account for the intricate geometric distortions associated with elastic rings. The proposed scaling laws are formulated based on the intrinsic deformation characteristics of elastic rings, rather than the traditional systemic governing equations. Numerical and experimental cases are conducted to assess the efficacy and precision of the proposed scaling laws, and the obtained results are compared with those achieved by traditional methods. The outcomes demonstrate that the scaling laws put forth by this study significantly enhance the predictive capabilities for deformations of elastic rings.
