The deoxidation,desulfuration,deoxysulfuration constants and the standard Gibbs energies(in J mol^(-1))of formation of the following rare earth compounds as the equilibrium phases in Ni-base solutions are given: Ce_2O...The deoxidation,desulfuration,deoxysulfuration constants and the standard Gibbs energies(in J mol^(-1))of formation of the following rare earth compounds as the equilibrium phases in Ni-base solutions are given: Ce_2O_3:lgK=-(6.0729×10~4/T)+16.50 △G^0=-1.162460×10~6+315.84T Ce_2O_2S:lgK=-(5.1450×10~4/T)+12.46 △G^0=-9.84850×10~5+238.50T Ce_2S_3:lgK=-(7.2232×10~4/T)+27.98 △G^0=-1.382600×10~6+535.55T Y_2O_3:lgK=-(4.2572×10~4/T)+7.74 △G^0=-8.14920×10~5+148.16T Y_2O_2S:lgK=-(3.3146×10~4/T)+3.85 △G^0=-6.34460×10~5+73.72T Y_2S_3:lgK=-(1.22487×10~5/T)+55.78 △G^0=-2.344630×10~0+1067.76T Interaction coefficients between Ce.Y and O are also given: e_o^(?)=-(3.33451×10~5/T)+149.7 e_O^(?)=-(1.63437×10~5/T)+71.8 The phase equilibria for Ni-Ce-S-O and Ni-Y-S-O solutions at 1600℃ provide the basis for pre- dicting the sequence and type of Ce and Y equilibrium phases formed in Ni-base solutions.The formulas controlling the morphology of inclusion formed in liquid Ni by Ce or Y addition are also given.展开更多
In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar perce...In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar percentage of Na_(2)Ni_(2)Ti_(6)O_(16)(NNTO)within Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)(NMTO),with x values of 10,20,30,40,and 50.Both XPS(X-ray Photoelectron Spectroscopy)and EDX(Energy Dispersive X-ray Spectroscopy)analyses unequivocally validated the formation of the NNMTO-x solid solutions.It was observed that when x is below 40,the NNMTO-x solid solution retains the structural characteristics of the original NMTO.However,beyond this threshold,significant alterations in crystal morphology were noted,accompanied by a noticeable decline in photocatalytic activity.Notably,the absorption edge of NNMTO-x(x<40)exhibited a shift towards the visible-light spectrum,thereby substantially broadening the absorption range.The findings highlight that NNMTO-30 possesses the most pronounced photocatalytic activity for the reduction of CO_(2).Specifically,after a 6 h irradiation period,the production rates of CO and CH_(4)were recorded at 42.38 and 1.47μmol/g,respectively.This investigation provides pivotal insights that are instrumental in the advancement of highly efficient and stable photocatalysts tailored for CO_(2)reduction processes.展开更多
The unique crystallographic lamellar microstructure(CLM) Ni-based superalloys fabricated by laser powder bed fusion(LPBF) exhibits excellent tensile properties.This study aims to investigate CLM's high-temperature...The unique crystallographic lamellar microstructure(CLM) Ni-based superalloys fabricated by laser powder bed fusion(LPBF) exhibits excellent tensile properties.This study aims to investigate CLM's high-temperature stress rupture behavior and use these findings to improve the additive manufacturing process.The result shows that the high temperature-induced intergranular fracture in <110> grain region is responsible for stress rupture failure under both conditions of 760 ℃/780 MPa and 980 ℃/260 MPa.Among them,the sub-grain boundary fracture occurs only under high temperature and low stress,980 ℃/260 MPa.Due to the severe intergranular fracture induced by stray grains,the stress rupture life is very low under both conditions.According to the finite element simulation,the formation of stray grains stems from the unstable heat flow within the melt pool during the process.In addition,the shorter stress rupture lifetime does not excite a more pronounced dislocation network around the γ′ phase.However,the deformation twins can still be activated inside the <110> grains,so it has excellent plasticity under both test conditions.Finally,this work indicates that the future optimization of CLM by LPBF should focus on eliminating of high-angle grain boundaries in <110> grains.展开更多
Turbine blades,due to their intricate geometry,are exposed to multiaxial stresses during operation.Consequently,it is imperative to examine the anisotropy of their stress-rupture behavior across various testing scenar...Turbine blades,due to their intricate geometry,are exposed to multiaxial stresses during operation.Consequently,it is imperative to examine the anisotropy of their stress-rupture behavior across various testing scenarios,particularly under high-temperature conditions.Stress-rupture behavior of a Ni-based single crystal superalloy was investigated under a load varying from 100 MPa to 137 MPa at 1,100℃ for both[001]-and[111]-orientated specimens.Results demonstrate that the rupture behavior of[111]-orientated specimens exhibits obviously higher sensitive to applied stress compared to[001]-orientated specimens.This difference is primarily attributed to the orientation dependentγ'coarsening behavior and distinct dislocation interactions atγ/γ'interfaces.In[001]-oriented specimens,plate-likeγ/γ'rafts rapidly form alongside well-developed interfacial dislocation networks,where theγ/γ'misfit stress dominates the microstructural evolution.In contrast,the[111]-orientated specimens exhibit retained,coarsenedγ'precipitates embedded within theγmatrix,accompanied by poorly developed interfacial dislocation networks.展开更多
Let A be a 3×3 singular or diagonalizable matrix,all solutions to the Yang-Baxter-like matrix equation have been determined.However,finding all solutions for full rank,non-diagonalizable matrices remains challeng...Let A be a 3×3 singular or diagonalizable matrix,all solutions to the Yang-Baxter-like matrix equation have been determined.However,finding all solutions for full rank,non-diagonalizable matrices remains challenging.By utilizing classification techniques,we establish all solutions of the Yang-Baxter-like matrix equation in this paper when the coefficient matrix A is similar to non-diagonalizable matrix diag(λ,J_(2)(λ))withλ̸=0.More specifically,we divide the non-diagonal elements of the solution into 10 different cases.By discussing each situation,we establish all solutions of the Yang-Baxter-like matrix equation.The results of this work enrich the existing ones.展开更多
This paper is concerned with an initial boundary value problem for the planar magnetohydrodynamic compressible flow with temperature dependent heat conductivity in a half-line.In particular,the transverse magnetic fie...This paper is concerned with an initial boundary value problem for the planar magnetohydrodynamic compressible flow with temperature dependent heat conductivity in a half-line.In particular,the transverse magnetic field is assumed to satisfy the Neumann boundary condition,which was first investigated by Kazhikhov in 1987.We establish the global existence of the unique strong solutions to the MHD equations without any smallness conditions on the initial data.More precisely,our result can be regarded as a natural generalization of Kazhikov’s result for applying the constant heat-conductivity in bounded domains to the degenerate case in unbounded domains.展开更多
In this article,we show the existence,uniqueness and stability of bounded solutions to the following quasilinear problems with mean curvature operator(φ'(x′(t)))′=f(t,x),t≥t_(0),lim_(t→∞)x(t)=ψ_(0),lim_(t→...In this article,we show the existence,uniqueness and stability of bounded solutions to the following quasilinear problems with mean curvature operator(φ'(x′(t)))′=f(t,x),t≥t_(0),lim_(t→∞)x(t)=ψ_(0),lim_(t→∞)x′(t)e^(t)=0,where t_(0) and ψ_(0) are real constants,φ(s)=s/√1−s^(2),s∈R with s∈(−1,1),f:[t_(0),∞)×R→R satisfies the Lipschitz or Osgood-type conditions.展开更多
The Ni−25%X(X=Fe,Co,Cu,molar fraction)solid solutions were prepared and then doped into MgH_(2) through high-energy ball milling.The initial dehydrogenation temperatures of MgH_(2)/Ni−25%X composites are all decreased...The Ni−25%X(X=Fe,Co,Cu,molar fraction)solid solutions were prepared and then doped into MgH_(2) through high-energy ball milling.The initial dehydrogenation temperatures of MgH_(2)/Ni−25%X composites are all decreased by about 90℃relative to the as-milled pristine MgH_(2).The Ni−25%Co solid solution exhibits the most excellent catalytic effect,and the milled MgH_(2)/Ni−25%Co composite can release 5.19 wt.%hydrogen within 10 min at 300℃,while the as-milled pristine MgH_(2) can only release 1.78 wt.%hydrogen.More importantly,the dehydrogenated MgH_(2)/Ni−25%Co composite can absorb 5.39 wt.%hydrogen at 275℃within 3 min.The superior hydrogen sorption kinetics of MgH_(2)/Ni−25%Co can be ascribed to the actual catalytic effect of in-situ formed Mg_(2)Ni(Co)compounds.First-principles calculations show that the hydrogen absorption/desorption energy barriers of Mg/MgH_(2) systems decrease significantly after doping with transition metal atoms,which interprets well the improved hydrogen sorption properties of MgH_(2) catalyzed by Ni-based solid solutions.展开更多
With the evolution of nickel-based single crystal superalloys,there is an increase in heavy elements such as Re and Ru.This has made solutal convection more pronounced during the directional solidification process,lea...With the evolution of nickel-based single crystal superalloys,there is an increase in heavy elements such as Re and Ru.This has made solutal convection more pronounced during the directional solidification process,leading to solute redistribution and increasing the risk of casting defects such as low-angle grain boundaries.To avoid casting defects,downward directional solidification(DWS)method is adopted to eliminate solutal convection and change solute redistribution.However,there is currently no in-situ characterization or quantitative simulation studying the solute redistribution during DWS and upward directional solidification(UWS)processes.A multicomponent phase field simulation coupled with lattice Boltzmann method was employed to quantitatively investigate changes in dendrite morphology,solutal convection and deviation of dendrite tips from the perspective of solute redistribution during UWS and DWS processes.The simulation of microstructure agrees well with the experimental results.The mechanism that explains how solutal convection affects side branching behavior is depicted.A novel approach is introduced to characterize dendrite deviation,elucidating the reasons why defects are prone to occur under the influence of natural convection and solute redistribution.展开更多
The 15th Five-Year Plan will begin in 2026,amid heightened global technological competition and rapid supply chain changes.At this pivotal moment,the low-altitude economy and commercial aerospace,once seen as futurist...The 15th Five-Year Plan will begin in 2026,amid heightened global technological competition and rapid supply chain changes.At this pivotal moment,the low-altitude economy and commercial aerospace,once seen as futuristic,are quickly transitioning from strategic concepts to large-scale manufacturing industries.These sectors now drive China’s high-quality development and support a new framework for international engagement.展开更多
Interaction rule between representative RE and Sn, Sb, Pb, Cu, S, P low melting point elements respectively in Fe , Cu , Al , Ni base liquid solutions including totally 34 ternary and quarternary systems was inve...Interaction rule between representative RE and Sn, Sb, Pb, Cu, S, P low melting point elements respectively in Fe , Cu , Al , Ni base liquid solutions including totally 34 ternary and quarternary systems was investigated. For each system some thermodynamic properties were obtained, such as the standard free energies of equilibrium reactions, activity interaction coefficients etc ..展开更多
Single-phase concentrated solid solution alloys(SP-CSAs),including high-entropy alloys,have received extensive attention due to their excellent irradiation resistance.In this work,displacement cascade simulations are ...Single-phase concentrated solid solution alloys(SP-CSAs),including high-entropy alloys,have received extensive attention due to their excellent irradiation resistance.In this work,displacement cascade simulations are conducted using the molecular dynamics method to study the evolution of defects in Ni-based SP-CSAs.Compared with pure Ni,the NiCr,NiCo,and NiCu alloys exhibit a larger number of Frankel pairs(FPs)in the thermal peak stage,but a smaller number of surviving FPs.However,the NiFe alloy displays the opposite phenomenon.To explain these different observations for NiFe and other alloys,the formation energy and migration energy of interstitials/vacancies are calculated.In the NiFe alloy,both the formation energy and migration energy barrier are higher.On the other hand,in NiCr and other alloys,the formation energy of interstitials/vacancies is lower,as is the migration energy barrier of interstitials.The energy analysis agrees well with previous observations.The present work provides new insights into the mechanism behind the irradiation resistance of binary Ni-based SP-CSAs.展开更多
Alloy composition design usually contributes to eliminating cracking in Ni-based superalloys during addi-tive manufacturing(AM).However,a detailed understanding of each solid solution element in the crack-ing suscepti...Alloy composition design usually contributes to eliminating cracking in Ni-based superalloys during addi-tive manufacturing(AM).However,a detailed understanding of each solid solution element in the crack-ing susceptibility of Ni-based superalloys during AM is still missing.Thirteen newly designed alloys are considered to investigate the combined effect of solid solution elements on cracking susceptibility.The behaviors of solidification cracking,liquation cracking,and solid-state cracking were analyzed by the microstructural characterization and thermodynamic calculations.The results showed that W and Mo cause the formation of high melting-point carbides at grain boundaries(GBs),which increase solidifica-tion cracking susceptibility.Moreover,W and Mo lead to a slightly higher solidification cracking index(SCI)compared to Co,Cr,and Re.In the successive solidification and remelting process,the borides en-riched in W,Mo,and B around GBs will cause grain boundary segregation and liquation cracking.W and Re extend the freezing range(FR)and exacerbate the segregation of Al and Ti in the inter-dendritic re-gions,contributing to the formation of eutectics.Similarly,complete or partial melting of the eutectic can induce liquation cracking during the thermal cycling in AM.The solid-state cracking susceptibility can be reduced by solid solution elements,especially Re and Co.In summary,compared to Co,Cr,and Re,W and Mo exacerbate the cracking susceptibility.展开更多
With ongoing global warming and increasing energy demands,the CH_(4)-CO_(2)reforming reaction(dry reforming of methane,DRM)has garnered significant attention as a promising carbon capture and utilization technology.Ni...With ongoing global warming and increasing energy demands,the CH_(4)-CO_(2)reforming reaction(dry reforming of methane,DRM)has garnered significant attention as a promising carbon capture and utilization technology.Nickel-based catalysts are renowned for their outstanding activity and selectivity in this process.The impact of metal-support interaction(MSI),on Ni-based catalyst performance has been extensively researched and debated recently.This paper reviews the recent research progress of MSI on Ni-based catalysts and their characterization and modulation strategies in catalytic reactions.From the perspective of MSI,the effects of different carriers(metal oxides,carbon materials and molecular sieves,etc.)are introduced on the dispersion and surface structure of Ni active metal particles,and the effect of MSI on the activity and stability of DRM reactions on Ni-based catalysts is discussed in detail.Future research should focus on better understanding and controlling MSI to improve the performance and durability of nickel-based catalysts in CH_(4)-CO_(2)reforming,advancing cleaner energy technologies.展开更多
The uniform refinement mechanisms and methods of deformed mixed and coarse grains inside a solution-treatment Ni-based superalloy during two-stage annealing treatment have been investigated.The two-stage heat treatmen...The uniform refinement mechanisms and methods of deformed mixed and coarse grains inside a solution-treatment Ni-based superalloy during two-stage annealing treatment have been investigated.The two-stage heat treatment experiments include an aging annealing treatment(AT)and a subsequent recrystallization annealing treatment(RT).The object of AT is to precipitate someδphases and consume part of storage energy to inhibit the grain growth during RT,while the RT is to refine mixed and coarse grains by recrystallization.It can be found that the recrystallization grains will quickly grow up to a large size when the AT time is too low or the RT temperature is too high,while the deformed coarse grains cannot be eliminated when the AT time is too long or the RT temperature is too low.In addition,the mixed microstructure composed of some abnormal coarse recrystallization grains(ACRGs)and a large number of fine grains can be observed in the annealed specimen when the AT time is 3 h and RT temperature is 980℃.The phenomenon attributes to the uneven distribution ofδphase resulted from the heterogeneous deformation energy when the AT time is too short.In the regions with a large number ofδphases,the recrystallization nucleation rate is promoted and the growth of grains is limited,which results in fine grains.However,in the regions with fewδphases,the recrystallization grains around grain boundaries can easily grow up,and the new recrystallization nucleus is difficult to form inside grain,which leads to ACRGs.Thus,in order to obtain uniform and fine annealed microstructure,it is a prerequisite to precipitate even-distributedδphase by choosing a suitable AT time,such as 12 h.Moreover,a relative high RT temperature is also needed to promote the recrystallization nucleation aroundδphase.The optimal annealing parameters range for uniformly refining mixed crystal can be summarized as:900℃×12 h+990℃×(40-60 min)and 900℃×12 h+1000℃×(10-15 min).展开更多
This paper reports the use of integrated computational alloy design,coupled with a rapid printability screening method,to downselect from a total of 70000 datasets in design space to five candidates in the first step,...This paper reports the use of integrated computational alloy design,coupled with a rapid printability screening method,to downselect from a total of 70000 datasets in design space to five candidates in the first step,and then from five to one in the second step.The new Ni-base superalloy with compositions of Ni-5.03Al-2.69Co-5.63Cr-0.04Hf-1.91Mo-2.36Re-3.32Ta-0.57Ti-8.46W-0.05C-0.019B exhibits an optimal balance of density(8.82 g/cm^(2)),printability(freezing range of 107℃),thermal stability(γ′-volume fraction of 50.7%at 980℃and low M_(d)value)and creep(rupture time of 612 h at 980℃/120 MPa).The micro-hardness varies mildly from 417.2±18.5 to 434.7±14.6 HV,suggesting good phase stability.This is substantiated by microstructure observations,which revealed the absence of a topologically close-packed phase.Machine-learning tools of the artificial neural network(ANN),random forest,and support vector regression,respectively,were used to predict creep rupture time.The ANN algorithm achieves the highest accuracy in predicting creep life.By recognising the“black box”nature of the ANN,interpretability analysis was conducted using the local interpretable model-agnostic method.The analysis supports that the ANN model truly learned meaningful functional relationships,and thus is judged as reliable.Feature correlation evaluation outcome emphasises the importance of incorporating microstructure-related input features.展开更多
The challenge of low temperature and rapid diffusion bonding of a Ni-based superalloy was hereby addressed by using a Ni nano-coating and a spark plasma sintering(SPS).It successfully produced a Nibased superalloy joi...The challenge of low temperature and rapid diffusion bonding of a Ni-based superalloy was hereby addressed by using a Ni nano-coating and a spark plasma sintering(SPS).It successfully produced a Nibased superalloy joint with 337 MPa shear strength at 500℃ for 30 min,which is approximately 400℃ lower than the traditional hot pressure diffusion bonding(HPDB)temperature.The microstructure and mechanical properties of the joints were systematically investigated.It is revealed that the pulsed current and ultra-fine grains(19 nm)in the Ni nano-coating could significantly facilitate voids closure.The voids closure mechanisms involved(i)pulsed current strengthened plastic deformation,(ii)pulsed current strengthened surface source diffusion,(iii)pulsed current strengthened bonding interface diffusion,(iv)grain growth dividing the initial large voids into nano-voids,and(v)massive grain boundaries(GBs),lattice defects,and local high-temperature strengthened GBs diffusion.Furthermore,the GBs migration across the interface was investigated,and the results revealed that the GBs migration and fine grains(350 nm)near the bonding interface together increased the joint strength.展开更多
Four powder metallurgy(PM)Ni-based superalloys with different Hf and Ta contents were creep-tested at 650℃ and 970 MPa,700℃ and 770 MPa,and 750℃ and 580 MPa,respectively.The effect of Hf and Ta on creep deformation...Four powder metallurgy(PM)Ni-based superalloys with different Hf and Ta contents were creep-tested at 650℃ and 970 MPa,700℃ and 770 MPa,and 750℃ and 580 MPa,respectively.The effect of Hf and Ta on creep deformation behaviors of the superalloys was studied from multiple scales by SEM,electron backscatter diffraction(EBSD),and aberration-corrected scanning transmission electron microscope(AC-STEM).The results showed that Hf and Ta suppressed the intergranular fracture and initiation of cracks during the acceleration creep stage,which prolonged the creep rupture time.Hf and Ta inhibited the stacking faults extending and the dislocation climbing and promoted the Suzuki segregation of W during the steady-state creep stage,which reduced the minimum creep rate and delayed the start time of the acceleration creep stage.The Suzuki segregation of Co,Cr,Mo,Ti,Nb,W,and Ta along stacking faults was observed after Hf and Ta addition,leading to the localized phase transformation in the γ′phase,and the stacking fault phase was chemically disordered.This study provided ideas for the composition design of novel PM Ni-based superalloys and theoretical foundations for the combined addition of Hf and Ta.展开更多
The coupling between heat and pressure is the kernel of inertia friction welding(IFW)and is still not fully understood.A novel 3D fully coupled finite element model based on a plastic friction pair was developed to si...The coupling between heat and pressure is the kernel of inertia friction welding(IFW)and is still not fully understood.A novel 3D fully coupled finite element model based on a plastic friction pair was developed to simulate the IFW process of a Ni-based superalloy and reveal the omnidirectional thermo-mechanical coupling mechanism of the friction interface.The numerical model successfully simulated the deceleration,deformation processes,and peak torsional moments in IFW and captured the evolution of temperature,contact pressure,and stress.The simulated results were validated through measured thermal history,optical macrography,and axial shortening.The results indicated that interfacial friction heat was the primary heat source,and plastic deformation energy only accounted for 4%of the total.The increase in initial rotational speed and friction pressure elevated the peak temperature,reaching a maximum of 1525.5K at an initial rotational speed of 2000 r/min and friction pressure of 400 MPa.The interface heat generation could form an axial temperature gradient exceeding 320K/mm.The radial inhomogeneities of heat generation and temperature were manifested in a concentric ring distribution with maximum heat flux and temperature ranging from 2/5 to 2/3 radius.The radial inhomogeneities were caused by increasing linear velocity along the radius and an opposite distribution of contact pressure,which could reach 1.7 times the set pressure at the center.The circumferential inhomogeneity of thermomechanical distribution during rotary friction welding was revealed for the first time,benefiting from the 3D model.The deflection and transformation of distribution in contact pressure and Mises stress were indicators of plastic deformation and transition of quasi-steady state welding.The critical Mises stress was 0.5 times the friction pressure in this study.The presented modeling provides a reliable insight into the thermo-mechanical coupling mechanism of IFW and lays a solid foundation for predicting the microstructures and mechanical properties of inertia friction welded joints.展开更多
The effect of cooling rate on the cooling γ′ precipitation behaviors was investigated in a Ni-base powder/metallurgy （P/M） superalloy （FGH4096）. The empirical equations were established between the cooling rate ...The effect of cooling rate on the cooling γ′ precipitation behaviors was investigated in a Ni-base powder/metallurgy （P/M） superalloy （FGH4096）. The empirical equations were established between the cooling rate and the average sizes of secondary and tertiary γ′ precipitates within grains and tertiary γ′ precipitates at grain boundaries, as well as the apparent width of grain boundaries. The results show that the average sizes of secondary or tertiary γ′ precipitates are inversely correlated with the cooling rate. The shape of secondary γ′ precipitates within grains changes from butterfly-like to spherical with the increase of cooling rate, but all the tertiaryγ′ precipitates formed are spherical in shape. It is also found that tertiary γ′ may be precipitated in the latter part of the cooling cycle only if the cooling rate is not faster than 4.3℃/s, and the apparent width of grain boundaries decreases linearly with the increase of cooling rate.展开更多
基金This subject is supported by the National Natural Science Foundation of China
文摘The deoxidation,desulfuration,deoxysulfuration constants and the standard Gibbs energies(in J mol^(-1))of formation of the following rare earth compounds as the equilibrium phases in Ni-base solutions are given: Ce_2O_3:lgK=-(6.0729×10~4/T)+16.50 △G^0=-1.162460×10~6+315.84T Ce_2O_2S:lgK=-(5.1450×10~4/T)+12.46 △G^0=-9.84850×10~5+238.50T Ce_2S_3:lgK=-(7.2232×10~4/T)+27.98 △G^0=-1.382600×10~6+535.55T Y_2O_3:lgK=-(4.2572×10~4/T)+7.74 △G^0=-8.14920×10~5+148.16T Y_2O_2S:lgK=-(3.3146×10~4/T)+3.85 △G^0=-6.34460×10~5+73.72T Y_2S_3:lgK=-(1.22487×10~5/T)+55.78 △G^0=-2.344630×10~0+1067.76T Interaction coefficients between Ce.Y and O are also given: e_o^(?)=-(3.33451×10~5/T)+149.7 e_O^(?)=-(1.63437×10~5/T)+71.8 The phase equilibria for Ni-Ce-S-O and Ni-Y-S-O solutions at 1600℃ provide the basis for pre- dicting the sequence and type of Ce and Y equilibrium phases formed in Ni-base solutions.The formulas controlling the morphology of inclusion formed in liquid Ni by Ce or Y addition are also given.
基金Supported by the Doctoral Research Start-up Project of Yuncheng University(YQ-2023067)Project of Shanxi Natural Science Foundation(202303021211189)+1 种基金Fund Program for the Scientific Activities of Selected Returned Overseas Professionals in Shanxi Provinces(20220036)Shanxi ProvinceIntelligent Optoelectronic Sensing Application Technology Innovation Center and Shanxi Province Optoelectronic Information Science and TechnologyLaboratory,Yuncheng University.
文摘In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar percentage of Na_(2)Ni_(2)Ti_(6)O_(16)(NNTO)within Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)(NMTO),with x values of 10,20,30,40,and 50.Both XPS(X-ray Photoelectron Spectroscopy)and EDX(Energy Dispersive X-ray Spectroscopy)analyses unequivocally validated the formation of the NNMTO-x solid solutions.It was observed that when x is below 40,the NNMTO-x solid solution retains the structural characteristics of the original NMTO.However,beyond this threshold,significant alterations in crystal morphology were noted,accompanied by a noticeable decline in photocatalytic activity.Notably,the absorption edge of NNMTO-x(x<40)exhibited a shift towards the visible-light spectrum,thereby substantially broadening the absorption range.The findings highlight that NNMTO-30 possesses the most pronounced photocatalytic activity for the reduction of CO_(2).Specifically,after a 6 h irradiation period,the production rates of CO and CH_(4)were recorded at 42.38 and 1.47μmol/g,respectively.This investigation provides pivotal insights that are instrumental in the advancement of highly efficient and stable photocatalysts tailored for CO_(2)reduction processes.
基金the financial support by the Project of Taihang Laboratory (No. A3023)Science Center for Gas Turbine Project (Grant No. P2022-CIV-002-001)。
文摘The unique crystallographic lamellar microstructure(CLM) Ni-based superalloys fabricated by laser powder bed fusion(LPBF) exhibits excellent tensile properties.This study aims to investigate CLM's high-temperature stress rupture behavior and use these findings to improve the additive manufacturing process.The result shows that the high temperature-induced intergranular fracture in <110> grain region is responsible for stress rupture failure under both conditions of 760 ℃/780 MPa and 980 ℃/260 MPa.Among them,the sub-grain boundary fracture occurs only under high temperature and low stress,980 ℃/260 MPa.Due to the severe intergranular fracture induced by stray grains,the stress rupture life is very low under both conditions.According to the finite element simulation,the formation of stray grains stems from the unstable heat flow within the melt pool during the process.In addition,the shorter stress rupture lifetime does not excite a more pronounced dislocation network around the γ′ phase.However,the deformation twins can still be activated inside the <110> grains,so it has excellent plasticity under both test conditions.Finally,this work indicates that the future optimization of CLM by LPBF should focus on eliminating of high-angle grain boundaries in <110> grains.
基金financially supported by the National Science and Technology Major Project of China(No.2019-VII-0019-0161 and No.2019-VII-0004-0144)the National Natural Science Foundation of China(No.92360302)the Shandong Provincial Natural Science Foundation of China(No.ZR2021QE103)。
文摘Turbine blades,due to their intricate geometry,are exposed to multiaxial stresses during operation.Consequently,it is imperative to examine the anisotropy of their stress-rupture behavior across various testing scenarios,particularly under high-temperature conditions.Stress-rupture behavior of a Ni-based single crystal superalloy was investigated under a load varying from 100 MPa to 137 MPa at 1,100℃ for both[001]-and[111]-orientated specimens.Results demonstrate that the rupture behavior of[111]-orientated specimens exhibits obviously higher sensitive to applied stress compared to[001]-orientated specimens.This difference is primarily attributed to the orientation dependentγ'coarsening behavior and distinct dislocation interactions atγ/γ'interfaces.In[001]-oriented specimens,plate-likeγ/γ'rafts rapidly form alongside well-developed interfacial dislocation networks,where theγ/γ'misfit stress dominates the microstructural evolution.In contrast,the[111]-orientated specimens exhibit retained,coarsenedγ'precipitates embedded within theγmatrix,accompanied by poorly developed interfacial dislocation networks.
基金Supported by National Natural Science Foundation of China(Grant No.62173161).
文摘Let A be a 3×3 singular or diagonalizable matrix,all solutions to the Yang-Baxter-like matrix equation have been determined.However,finding all solutions for full rank,non-diagonalizable matrices remains challenging.By utilizing classification techniques,we establish all solutions of the Yang-Baxter-like matrix equation in this paper when the coefficient matrix A is similar to non-diagonalizable matrix diag(λ,J_(2)(λ))withλ̸=0.More specifically,we divide the non-diagonal elements of the solution into 10 different cases.By discussing each situation,we establish all solutions of the Yang-Baxter-like matrix equation.The results of this work enrich the existing ones.
基金supported by the National Natural Science Foundation of China(12401279,12371219)the Academic and Technical Leaders Training Plan of Jiangxi Province(20212BCJ23027).
文摘This paper is concerned with an initial boundary value problem for the planar magnetohydrodynamic compressible flow with temperature dependent heat conductivity in a half-line.In particular,the transverse magnetic field is assumed to satisfy the Neumann boundary condition,which was first investigated by Kazhikhov in 1987.We establish the global existence of the unique strong solutions to the MHD equations without any smallness conditions on the initial data.More precisely,our result can be regarded as a natural generalization of Kazhikov’s result for applying the constant heat-conductivity in bounded domains to the degenerate case in unbounded domains.
基金Supported by the National Natural Science Foundation of China(Grant Nos.12361040,12061064)the National Science Foundation of Gansu Province(Grant No.22JR5RA264)State Scholarship Fund(Grant No.20230862021).
文摘In this article,we show the existence,uniqueness and stability of bounded solutions to the following quasilinear problems with mean curvature operator(φ'(x′(t)))′=f(t,x),t≥t_(0),lim_(t→∞)x(t)=ψ_(0),lim_(t→∞)x′(t)e^(t)=0,where t_(0) and ψ_(0) are real constants,φ(s)=s/√1−s^(2),s∈R with s∈(−1,1),f:[t_(0),∞)×R→R satisfies the Lipschitz or Osgood-type conditions.
基金the National Natural Science Foundation of China(Nos.51874049,51904036)the Science Research Project of Hunan Province Office of Education,China(No.20A024)+2 种基金the Changsha Science and Technology Program Project(No.kq1907092)the Hunan Provincial Key Laboratory of Materials Protection for Electric Power and Transportation,China(No.2019CL03)the Research and Innovation Project of Graduate Students in Changsha University of Science and Technology,China(No.CX2020SS35).
文摘The Ni−25%X(X=Fe,Co,Cu,molar fraction)solid solutions were prepared and then doped into MgH_(2) through high-energy ball milling.The initial dehydrogenation temperatures of MgH_(2)/Ni−25%X composites are all decreased by about 90℃relative to the as-milled pristine MgH_(2).The Ni−25%Co solid solution exhibits the most excellent catalytic effect,and the milled MgH_(2)/Ni−25%Co composite can release 5.19 wt.%hydrogen within 10 min at 300℃,while the as-milled pristine MgH_(2) can only release 1.78 wt.%hydrogen.More importantly,the dehydrogenated MgH_(2)/Ni−25%Co composite can absorb 5.39 wt.%hydrogen at 275℃within 3 min.The superior hydrogen sorption kinetics of MgH_(2)/Ni−25%Co can be ascribed to the actual catalytic effect of in-situ formed Mg_(2)Ni(Co)compounds.First-principles calculations show that the hydrogen absorption/desorption energy barriers of Mg/MgH_(2) systems decrease significantly after doping with transition metal atoms,which interprets well the improved hydrogen sorption properties of MgH_(2) catalyzed by Ni-based solid solutions.
基金supported by the stable support project and the Major National Science and Technology Project(2017-VII-0008-0101).
文摘With the evolution of nickel-based single crystal superalloys,there is an increase in heavy elements such as Re and Ru.This has made solutal convection more pronounced during the directional solidification process,leading to solute redistribution and increasing the risk of casting defects such as low-angle grain boundaries.To avoid casting defects,downward directional solidification(DWS)method is adopted to eliminate solutal convection and change solute redistribution.However,there is currently no in-situ characterization or quantitative simulation studying the solute redistribution during DWS and upward directional solidification(UWS)processes.A multicomponent phase field simulation coupled with lattice Boltzmann method was employed to quantitatively investigate changes in dendrite morphology,solutal convection and deviation of dendrite tips from the perspective of solute redistribution during UWS and DWS processes.The simulation of microstructure agrees well with the experimental results.The mechanism that explains how solutal convection affects side branching behavior is depicted.A novel approach is introduced to characterize dendrite deviation,elucidating the reasons why defects are prone to occur under the influence of natural convection and solute redistribution.
文摘The 15th Five-Year Plan will begin in 2026,amid heightened global technological competition and rapid supply chain changes.At this pivotal moment,the low-altitude economy and commercial aerospace,once seen as futuristic,are quickly transitioning from strategic concepts to large-scale manufacturing industries.These sectors now drive China’s high-quality development and support a new framework for international engagement.
基金Project Sponsored by the National Natural Science Foundation
文摘Interaction rule between representative RE and Sn, Sb, Pb, Cu, S, P low melting point elements respectively in Fe , Cu , Al , Ni base liquid solutions including totally 34 ternary and quarternary systems was investigated. For each system some thermodynamic properties were obtained, such as the standard free energies of equilibrium reactions, activity interaction coefficients etc ..
基金supported by the National Natural Science Foundation of China(12232008,12072211)Foundation of Key laboratory(2022JCJQLB05703)Sichuan Province Science and Technology Project(2023NSFSC0914,2020JDJQ0029).
文摘Single-phase concentrated solid solution alloys(SP-CSAs),including high-entropy alloys,have received extensive attention due to their excellent irradiation resistance.In this work,displacement cascade simulations are conducted using the molecular dynamics method to study the evolution of defects in Ni-based SP-CSAs.Compared with pure Ni,the NiCr,NiCo,and NiCu alloys exhibit a larger number of Frankel pairs(FPs)in the thermal peak stage,but a smaller number of surviving FPs.However,the NiFe alloy displays the opposite phenomenon.To explain these different observations for NiFe and other alloys,the formation energy and migration energy of interstitials/vacancies are calculated.In the NiFe alloy,both the formation energy and migration energy barrier are higher.On the other hand,in NiCr and other alloys,the formation energy of interstitials/vacancies is lower,as is the migration energy barrier of interstitials.The energy analysis agrees well with previous observations.The present work provides new insights into the mechanism behind the irradiation resistance of binary Ni-based SP-CSAs.
基金supported by the National Science and Technology Major Project,China(Project No.Y2019-Ⅶ-0011-0151)and the Science Center for Gas Turbine Project(Project No.P2022-C-Ⅳ-002-001).
文摘Alloy composition design usually contributes to eliminating cracking in Ni-based superalloys during addi-tive manufacturing(AM).However,a detailed understanding of each solid solution element in the crack-ing susceptibility of Ni-based superalloys during AM is still missing.Thirteen newly designed alloys are considered to investigate the combined effect of solid solution elements on cracking susceptibility.The behaviors of solidification cracking,liquation cracking,and solid-state cracking were analyzed by the microstructural characterization and thermodynamic calculations.The results showed that W and Mo cause the formation of high melting-point carbides at grain boundaries(GBs),which increase solidifica-tion cracking susceptibility.Moreover,W and Mo lead to a slightly higher solidification cracking index(SCI)compared to Co,Cr,and Re.In the successive solidification and remelting process,the borides en-riched in W,Mo,and B around GBs will cause grain boundary segregation and liquation cracking.W and Re extend the freezing range(FR)and exacerbate the segregation of Al and Ti in the inter-dendritic re-gions,contributing to the formation of eutectics.Similarly,complete or partial melting of the eutectic can induce liquation cracking during the thermal cycling in AM.The solid-state cracking susceptibility can be reduced by solid solution elements,especially Re and Co.In summary,compared to Co,Cr,and Re,W and Mo exacerbate the cracking susceptibility.
基金supported by the Natural Science Foundation of Shanxi Province(202203021221155)the Foundation of National Key Laboratory of High Efficiency and Low Carbon Utilization of Coal(J23-24-902)。
文摘With ongoing global warming and increasing energy demands,the CH_(4)-CO_(2)reforming reaction(dry reforming of methane,DRM)has garnered significant attention as a promising carbon capture and utilization technology.Nickel-based catalysts are renowned for their outstanding activity and selectivity in this process.The impact of metal-support interaction(MSI),on Ni-based catalyst performance has been extensively researched and debated recently.This paper reviews the recent research progress of MSI on Ni-based catalysts and their characterization and modulation strategies in catalytic reactions.From the perspective of MSI,the effects of different carriers(metal oxides,carbon materials and molecular sieves,etc.)are introduced on the dispersion and surface structure of Ni active metal particles,and the effect of MSI on the activity and stability of DRM reactions on Ni-based catalysts is discussed in detail.Future research should focus on better understanding and controlling MSI to improve the performance and durability of nickel-based catalysts in CH_(4)-CO_(2)reforming,advancing cleaner energy technologies.
基金the National Natural Science Foundation of China(No.51975593)the Hunan Provincial Natural Science Foundation of China(No.2020JJ4113)the Science and Technology Innovation Planning Project of Hunan Province(No.2019XK2301)。
文摘The uniform refinement mechanisms and methods of deformed mixed and coarse grains inside a solution-treatment Ni-based superalloy during two-stage annealing treatment have been investigated.The two-stage heat treatment experiments include an aging annealing treatment(AT)and a subsequent recrystallization annealing treatment(RT).The object of AT is to precipitate someδphases and consume part of storage energy to inhibit the grain growth during RT,while the RT is to refine mixed and coarse grains by recrystallization.It can be found that the recrystallization grains will quickly grow up to a large size when the AT time is too low or the RT temperature is too high,while the deformed coarse grains cannot be eliminated when the AT time is too long or the RT temperature is too low.In addition,the mixed microstructure composed of some abnormal coarse recrystallization grains(ACRGs)and a large number of fine grains can be observed in the annealed specimen when the AT time is 3 h and RT temperature is 980℃.The phenomenon attributes to the uneven distribution ofδphase resulted from the heterogeneous deformation energy when the AT time is too short.In the regions with a large number ofδphases,the recrystallization nucleation rate is promoted and the growth of grains is limited,which results in fine grains.However,in the regions with fewδphases,the recrystallization grains around grain boundaries can easily grow up,and the new recrystallization nucleus is difficult to form inside grain,which leads to ACRGs.Thus,in order to obtain uniform and fine annealed microstructure,it is a prerequisite to precipitate even-distributedδphase by choosing a suitable AT time,such as 12 h.Moreover,a relative high RT temperature is also needed to promote the recrystallization nucleation aroundδphase.The optimal annealing parameters range for uniformly refining mixed crystal can be summarized as:900℃×12 h+990℃×(40-60 min)and 900℃×12 h+1000℃×(10-15 min).
基金financial support from the UK's Engineering and Physical Sciences Research Council,EPSRC First Grant Scheme EP/P025978/1Early Career Fellowship Scheme EP/R043973/1financial support from the National Natural Science Foundation of China(No.52071006).
文摘This paper reports the use of integrated computational alloy design,coupled with a rapid printability screening method,to downselect from a total of 70000 datasets in design space to five candidates in the first step,and then from five to one in the second step.The new Ni-base superalloy with compositions of Ni-5.03Al-2.69Co-5.63Cr-0.04Hf-1.91Mo-2.36Re-3.32Ta-0.57Ti-8.46W-0.05C-0.019B exhibits an optimal balance of density(8.82 g/cm^(2)),printability(freezing range of 107℃),thermal stability(γ′-volume fraction of 50.7%at 980℃and low M_(d)value)and creep(rupture time of 612 h at 980℃/120 MPa).The micro-hardness varies mildly from 417.2±18.5 to 434.7±14.6 HV,suggesting good phase stability.This is substantiated by microstructure observations,which revealed the absence of a topologically close-packed phase.Machine-learning tools of the artificial neural network(ANN),random forest,and support vector regression,respectively,were used to predict creep rupture time.The ANN algorithm achieves the highest accuracy in predicting creep life.By recognising the“black box”nature of the ANN,interpretability analysis was conducted using the local interpretable model-agnostic method.The analysis supports that the ANN model truly learned meaningful functional relationships,and thus is judged as reliable.Feature correlation evaluation outcome emphasises the importance of incorporating microstructure-related input features.
基金financially supported by the National Nat-ural Science Foundation of China(Nos.U22A20185,52175302,and U21A20128)the National MCF Energy R&D Program(No.2019YFE03100100)the Fundamental Research Funds for the Central Universities(No.2022FRFK060009).
文摘The challenge of low temperature and rapid diffusion bonding of a Ni-based superalloy was hereby addressed by using a Ni nano-coating and a spark plasma sintering(SPS).It successfully produced a Nibased superalloy joint with 337 MPa shear strength at 500℃ for 30 min,which is approximately 400℃ lower than the traditional hot pressure diffusion bonding(HPDB)temperature.The microstructure and mechanical properties of the joints were systematically investigated.It is revealed that the pulsed current and ultra-fine grains(19 nm)in the Ni nano-coating could significantly facilitate voids closure.The voids closure mechanisms involved(i)pulsed current strengthened plastic deformation,(ii)pulsed current strengthened surface source diffusion,(iii)pulsed current strengthened bonding interface diffusion,(iv)grain growth dividing the initial large voids into nano-voids,and(v)massive grain boundaries(GBs),lattice defects,and local high-temperature strengthened GBs diffusion.Furthermore,the GBs migration across the interface was investigated,and the results revealed that the GBs migration and fine grains(350 nm)near the bonding interface together increased the joint strength.
基金financially supported by the National Science and Technology Major Project of China(No.2017-Ⅵ-0008-0078)。
文摘Four powder metallurgy(PM)Ni-based superalloys with different Hf and Ta contents were creep-tested at 650℃ and 970 MPa,700℃ and 770 MPa,and 750℃ and 580 MPa,respectively.The effect of Hf and Ta on creep deformation behaviors of the superalloys was studied from multiple scales by SEM,electron backscatter diffraction(EBSD),and aberration-corrected scanning transmission electron microscope(AC-STEM).The results showed that Hf and Ta suppressed the intergranular fracture and initiation of cracks during the acceleration creep stage,which prolonged the creep rupture time.Hf and Ta inhibited the stacking faults extending and the dislocation climbing and promoted the Suzuki segregation of W during the steady-state creep stage,which reduced the minimum creep rate and delayed the start time of the acceleration creep stage.The Suzuki segregation of Co,Cr,Mo,Ti,Nb,W,and Ta along stacking faults was observed after Hf and Ta addition,leading to the localized phase transformation in the γ′phase,and the stacking fault phase was chemically disordered.This study provided ideas for the composition design of novel PM Ni-based superalloys and theoretical foundations for the combined addition of Hf and Ta.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFB3404904)。
文摘The coupling between heat and pressure is the kernel of inertia friction welding(IFW)and is still not fully understood.A novel 3D fully coupled finite element model based on a plastic friction pair was developed to simulate the IFW process of a Ni-based superalloy and reveal the omnidirectional thermo-mechanical coupling mechanism of the friction interface.The numerical model successfully simulated the deceleration,deformation processes,and peak torsional moments in IFW and captured the evolution of temperature,contact pressure,and stress.The simulated results were validated through measured thermal history,optical macrography,and axial shortening.The results indicated that interfacial friction heat was the primary heat source,and plastic deformation energy only accounted for 4%of the total.The increase in initial rotational speed and friction pressure elevated the peak temperature,reaching a maximum of 1525.5K at an initial rotational speed of 2000 r/min and friction pressure of 400 MPa.The interface heat generation could form an axial temperature gradient exceeding 320K/mm.The radial inhomogeneities of heat generation and temperature were manifested in a concentric ring distribution with maximum heat flux and temperature ranging from 2/5 to 2/3 radius.The radial inhomogeneities were caused by increasing linear velocity along the radius and an opposite distribution of contact pressure,which could reach 1.7 times the set pressure at the center.The circumferential inhomogeneity of thermomechanical distribution during rotary friction welding was revealed for the first time,benefiting from the 3D model.The deflection and transformation of distribution in contact pressure and Mises stress were indicators of plastic deformation and transition of quasi-steady state welding.The critical Mises stress was 0.5 times the friction pressure in this study.The presented modeling provides a reliable insight into the thermo-mechanical coupling mechanism of IFW and lays a solid foundation for predicting the microstructures and mechanical properties of inertia friction welded joints.
文摘The effect of cooling rate on the cooling γ′ precipitation behaviors was investigated in a Ni-base powder/metallurgy （P/M） superalloy （FGH4096）. The empirical equations were established between the cooling rate and the average sizes of secondary and tertiary γ′ precipitates within grains and tertiary γ′ precipitates at grain boundaries, as well as the apparent width of grain boundaries. The results show that the average sizes of secondary or tertiary γ′ precipitates are inversely correlated with the cooling rate. The shape of secondary γ′ precipitates within grains changes from butterfly-like to spherical with the increase of cooling rate, but all the tertiaryγ′ precipitates formed are spherical in shape. It is also found that tertiary γ′ may be precipitated in the latter part of the cooling cycle only if the cooling rate is not faster than 4.3℃/s, and the apparent width of grain boundaries decreases linearly with the increase of cooling rate.
