In this paper, we propose a two-grid algorithm for solving the stream function formulation of the stationary Navies-Stokes equations. The algorithm is constructed by reducing the original system to one small, nonlinea...In this paper, we propose a two-grid algorithm for solving the stream function formulation of the stationary Navies-Stokes equations. The algorithm is constructed by reducing the original system to one small, nonlinear system on the coarse mesh space and two similar linear systems （with same stiffness matrix but different right-hand side） on the fine mesh space. The convergence analysis and error estimation of the algorithm are given for the case of conforming elements. Furthermore, the Mgorithm produces a numerical solution with the optimal asymptotic H^2-error. Finally, we give a numerical illustration to demonstrate the effectiveness of the two-grid algorithm for solving the Navier-Stokes equations.展开更多
For the vector attitude determination, the traditional optimal algorithms which are based on quaternion estimator（QUEST） measurement noise model are complicated for just two observations. In our application, the mag...For the vector attitude determination, the traditional optimal algorithms which are based on quaternion estimator（QUEST） measurement noise model are complicated for just two observations. In our application, the magnetometer and accelerometer are not two comparable kinds of sensors and both are not small field-of-view sensors as well. So in this paper a new unit measurement model is derived. According to the Wahba problem, the optimal weights for each measurement are obtained by the error variance researches. Then an improved quaternion Gauss–Newton method is presented and adopted to acquire attitude. Eventually, simulation results and experimental validation employed to test the proposed method demonstrate the usefulness of the improved algorithm.展开更多
Newton＇s learning algorithm of NN is presented and realized. In theory, the convergence rate of learning algorithm of NN based on Newton＇s method must be faster than BP＇s and other learning algorithms, because the ...Newton＇s learning algorithm of NN is presented and realized. In theory, the convergence rate of learning algorithm of NN based on Newton＇s method must be faster than BP＇s and other learning algorithms, because the gradient method is linearly convergent while Newton＇s method has second order convergence rate. The fast computing algorithm of Hesse matrix of the cost function of NN is proposed and it is the theory basis of the improvement of Newton＇s learning algorithm. Simulation results show that the convergence rate of Newton＇s learning algorithm is high and apparently faster than the traditional BP method＇s, and the robustness of Newton＇s learning algorithm is also better than BP method＇ s.展开更多
With more and more researches about improving BP algorithm, there are more improvement methods. The paper researches two improvement algorithms based on quasi-Newton method, DFP algorithm and L-BFGS algorithm. After f...With more and more researches about improving BP algorithm, there are more improvement methods. The paper researches two improvement algorithms based on quasi-Newton method, DFP algorithm and L-BFGS algorithm. After fully analyzing the features of quasi- Newton methods, the paper improves BP neural network algorithm. And the adjustment is made for the problems in the improvement process. The paper makes empirical analysis and proves the effectiveness of BP neural network algorithm based on quasi-Newton method. The improved algorithms are compared with the traditional BP algorithm, which indicates that the imoroved BP algorithm is better.展开更多
The Newton-Like algorithm with price estimation error in optimization flow control in network is analyzed. The estimation error is treated as inexactness of the gradient and the inexact descent direction is analyzed. ...The Newton-Like algorithm with price estimation error in optimization flow control in network is analyzed. The estimation error is treated as inexactness of the gradient and the inexact descent direction is analyzed. Based on the optimization theory, a sufficient condition for convergence of this algorithm with bounded price estimation error is obtained. Furthermore, even when this sufficient condition doesn＇t hold, this algorithm can also converge, provided a modified step size, and an attraction region is obtained. Based on Lasalle＇s invariance principle applied to a suitable Lyapunov function, the dynamic system described by this algorithm is proved to be global stability if the error is zero. And the Newton-Like algorithm with bounded price estimation error is also globally stable if the error satisfies the sufficient condition for convergence. All trajectories ultimately converge to the equilibrium point.展开更多
The computational accuracy and efficiency of modeling the stress spectrum derived from bridge monitoring data significantly influence the fatigue life assessment of steel bridges.Therefore,determining the optimal stre...The computational accuracy and efficiency of modeling the stress spectrum derived from bridge monitoring data significantly influence the fatigue life assessment of steel bridges.Therefore,determining the optimal stress spectrum model is crucial for further fatigue reliability analysis.This study investigates the performance of the REBMIX algorithm in modeling both univariate(stress range)and multivariate(stress range and mean stress)distributions of the rain-flowmatrix for a steel arch bridge,usingAkaike’s Information Criterion(AIC)as a performance metric.Four types of finitemixture distributions—Normal,Lognormal,Weibull,and Gamma—are employed tomodel the stress range.Additionally,mixed distributions,including Normal-Normal,Lognormal-Normal,Weibull-Normal,and Gamma-Normal,are utilized to model the joint distribution of stress range and mean stress.The REBMIX algorithm estimates the number of components,component weights,and component parameters for each candidate finite mixture distribution.The results demonstrate that the REBMIX algorithm-based mixture parameter estimation approach effectively identifies the optimal distribution based on AIC values.Furthermore,the algorithm exhibits superior computational efficiency compared to traditional methods,making it highly suitable for practical applications.展开更多
The generalized complementarity problem includes the well-known nonlinear complementarity problem and linear complementarity problem as special cases.In this paper, based on a class of smoothing functions, a smoothing...The generalized complementarity problem includes the well-known nonlinear complementarity problem and linear complementarity problem as special cases.In this paper, based on a class of smoothing functions, a smoothing Newton-type algorithm is proposed for solving the generalized complementarity problem.Under suitable assumptions, the proposed algorithm is well-defined and global convergent.展开更多
Distributed generation (DG) is gaining in importance due to the growing demand for electrical energy and the key role it plays in reducing actual energy losses, lowering operating costs and improving voltage stability...Distributed generation (DG) is gaining in importance due to the growing demand for electrical energy and the key role it plays in reducing actual energy losses, lowering operating costs and improving voltage stability. In this paper, we propose to inject distributed power generation into a distribution system while minimizing active energy losses. This injection should be done at a grid node (which is a point where energy can be injected into or recovered from the grid) that will be considered the optimal node when total active losses in the radial distribution system are minimal. The focus is on meeting energy demand using renewable energy sources. The main criterion is the minimization of active energy losses during injection. The method used is the algorithm of bee colony (ABC) associated with Newtonian energy flow transfer equations. The method has been implemented in MATLAB for optimal node search in IEEE 14, 33 and 57 nodes networks. The active energy loss results of this hybrid algorithm were compared with the results of previous searches. This comparison shows that the proposed algorithm allows to have reduced losses with the power injected that we have found.展开更多
The modeling and optimization of wind farm layouts can effectively reduce the wake effect between turbine units,thereby enhancing the expected output power and avoiding negative influence.Traditional wind farm optimiz...The modeling and optimization of wind farm layouts can effectively reduce the wake effect between turbine units,thereby enhancing the expected output power and avoiding negative influence.Traditional wind farm optimization often uses idealized wake models,neglecting the influence of wind shear at different elevations,which leads to a lack of precision in estimating wake effects and fails to meet the accuracy and reliability requirements of practical engineering.To address this,we have constructed a three-dimensional 3D wind farm optimization model that incorporates elevation,utilizing a 3D wake model to better reflect real-world conditions.We aim to assess the optimization state of the algorithm and provide strong incentives at the right moments to ensure continuous evolution of the population.To this end,we propose an evolutionary adaptation degreeguided genetic algorithm based on power-law perturbation(PPGA)to adapt multidimensional conditions.We select the offshore wind power project in Nantong,Jiangsu,China,as a study example and compare PPGA with other well-performing algorithms under this practical project.Based on the actual wind condition data,the experimental results demonstrate that PPGA can effectively tackle this complex problem and achieve the best power efficiency.展开更多
By using a smoothing function,the P nonlinear complementarity problem(P NCP)can be reformulated as a parameterized smooth equation.A Newton method is proposed to solve this equation.The iteration sequence generated by...By using a smoothing function,the P nonlinear complementarity problem(P NCP)can be reformulated as a parameterized smooth equation.A Newton method is proposed to solve this equation.The iteration sequence generated by the proposed algorithm is bounded and this algorithm is proved to be globally convergent under an assumption that the P NCP has a nonempty solution set.This assumption is weaker than the ones used in most existing smoothing algorithms.In particular,the solution obtained by the proposed algorithm is shown to be a maximally complementary solution of the P NCP without any additional assumption.展开更多
Based on the extraction equilibrium and mass balances in countercurrent extraction systems, a novel method was studied for dealing with the extraction equilibrium and the mass distribution in a multi-component(gamma-c...Based on the extraction equilibrium and mass balances in countercurrent extraction systems, a novel method was studied for dealing with the extraction equilibrium and the mass distribution in a multi-component(gamma-component) system. The relationships of mass distribution (x(i), y(i), i = 1, ..., lambda) between two phases were expressed by 2 lambda dimensional simultaneous equations. These simultaneous equations can be converted to a one-dimension nonlinear equation, then it was solved by Newton-Raphson algorithm within a few number of iteration. Compared with the regular calculation method for the 2 lambda dimensional simultaneous equations, Newton-Raphson algorithm can decrease the number of iteration, increase the convergence of the equations and accelerate the speed of simulation. It was verified in many multi-component systems with satisfactory results. As an example, a five-component system is demonstrated in this paper.展开更多
基金supported by National Foundation of Natural Science under the Grant 11071216
文摘In this paper, we propose a two-grid algorithm for solving the stream function formulation of the stationary Navies-Stokes equations. The algorithm is constructed by reducing the original system to one small, nonlinear system on the coarse mesh space and two similar linear systems （with same stiffness matrix but different right-hand side） on the fine mesh space. The convergence analysis and error estimation of the algorithm are given for the case of conforming elements. Furthermore, the Mgorithm produces a numerical solution with the optimal asymptotic H^2-error. Finally, we give a numerical illustration to demonstrate the effectiveness of the two-grid algorithm for solving the Navier-Stokes equations.
文摘For the vector attitude determination, the traditional optimal algorithms which are based on quaternion estimator（QUEST） measurement noise model are complicated for just two observations. In our application, the magnetometer and accelerometer are not two comparable kinds of sensors and both are not small field-of-view sensors as well. So in this paper a new unit measurement model is derived. According to the Wahba problem, the optimal weights for each measurement are obtained by the error variance researches. Then an improved quaternion Gauss–Newton method is presented and adopted to acquire attitude. Eventually, simulation results and experimental validation employed to test the proposed method demonstrate the usefulness of the improved algorithm.
文摘Newton＇s learning algorithm of NN is presented and realized. In theory, the convergence rate of learning algorithm of NN based on Newton＇s method must be faster than BP＇s and other learning algorithms, because the gradient method is linearly convergent while Newton＇s method has second order convergence rate. The fast computing algorithm of Hesse matrix of the cost function of NN is proposed and it is the theory basis of the improvement of Newton＇s learning algorithm. Simulation results show that the convergence rate of Newton＇s learning algorithm is high and apparently faster than the traditional BP method＇s, and the robustness of Newton＇s learning algorithm is also better than BP method＇ s.
文摘With more and more researches about improving BP algorithm, there are more improvement methods. The paper researches two improvement algorithms based on quasi-Newton method, DFP algorithm and L-BFGS algorithm. After fully analyzing the features of quasi- Newton methods, the paper improves BP neural network algorithm. And the adjustment is made for the problems in the improvement process. The paper makes empirical analysis and proves the effectiveness of BP neural network algorithm based on quasi-Newton method. The improved algorithms are compared with the traditional BP algorithm, which indicates that the imoroved BP algorithm is better.
基金supported in part by the National Outstanding Youth Foundation of P.R.China (60525303)the National Natural Science Foundation of P.R.China(60404022,60604004)+2 种基金the Natural Science Foundation of Hebei Province (102160)the special projects in mathematics funded by the Natural Science Foundation of Hebei Province(07M005)the NS of Education Office in Hebei Province (2004123).
文摘The Newton-Like algorithm with price estimation error in optimization flow control in network is analyzed. The estimation error is treated as inexactness of the gradient and the inexact descent direction is analyzed. Based on the optimization theory, a sufficient condition for convergence of this algorithm with bounded price estimation error is obtained. Furthermore, even when this sufficient condition doesn＇t hold, this algorithm can also converge, provided a modified step size, and an attraction region is obtained. Based on Lasalle＇s invariance principle applied to a suitable Lyapunov function, the dynamic system described by this algorithm is proved to be global stability if the error is zero. And the Newton-Like algorithm with bounded price estimation error is also globally stable if the error satisfies the sufficient condition for convergence. All trajectories ultimately converge to the equilibrium point.
基金jointly supported by the Fundamental Research Funds for the Central Universities(Grant No.xzy012023075)the Zhejiang Engineering Research Center of Intelligent Urban Infrastructure(Grant No.IUI2023-YB-12).
文摘The computational accuracy and efficiency of modeling the stress spectrum derived from bridge monitoring data significantly influence the fatigue life assessment of steel bridges.Therefore,determining the optimal stress spectrum model is crucial for further fatigue reliability analysis.This study investigates the performance of the REBMIX algorithm in modeling both univariate(stress range)and multivariate(stress range and mean stress)distributions of the rain-flowmatrix for a steel arch bridge,usingAkaike’s Information Criterion(AIC)as a performance metric.Four types of finitemixture distributions—Normal,Lognormal,Weibull,and Gamma—are employed tomodel the stress range.Additionally,mixed distributions,including Normal-Normal,Lognormal-Normal,Weibull-Normal,and Gamma-Normal,are utilized to model the joint distribution of stress range and mean stress.The REBMIX algorithm estimates the number of components,component weights,and component parameters for each candidate finite mixture distribution.The results demonstrate that the REBMIX algorithm-based mixture parameter estimation approach effectively identifies the optimal distribution based on AIC values.Furthermore,the algorithm exhibits superior computational efficiency compared to traditional methods,making it highly suitable for practical applications.
基金Supported by LIU Hui Centre for Applied Mathematics of Nankai University and Tianjin University
文摘The generalized complementarity problem includes the well-known nonlinear complementarity problem and linear complementarity problem as special cases.In this paper, based on a class of smoothing functions, a smoothing Newton-type algorithm is proposed for solving the generalized complementarity problem.Under suitable assumptions, the proposed algorithm is well-defined and global convergent.
文摘Distributed generation (DG) is gaining in importance due to the growing demand for electrical energy and the key role it plays in reducing actual energy losses, lowering operating costs and improving voltage stability. In this paper, we propose to inject distributed power generation into a distribution system while minimizing active energy losses. This injection should be done at a grid node (which is a point where energy can be injected into or recovered from the grid) that will be considered the optimal node when total active losses in the radial distribution system are minimal. The focus is on meeting energy demand using renewable energy sources. The main criterion is the minimization of active energy losses during injection. The method used is the algorithm of bee colony (ABC) associated with Newtonian energy flow transfer equations. The method has been implemented in MATLAB for optimal node search in IEEE 14, 33 and 57 nodes networks. The active energy loss results of this hybrid algorithm were compared with the results of previous searches. This comparison shows that the proposed algorithm allows to have reduced losses with the power injected that we have found.
基金partially supported by the Japan Society for the Promotion of Science(JSPS)KAKENHI(JP23K24899)Japan Science and Technology Agency(JST)Support for Pioneering Research Initiated by the Next Generation(SPRING)(JPMJSP2145).
文摘The modeling and optimization of wind farm layouts can effectively reduce the wake effect between turbine units,thereby enhancing the expected output power and avoiding negative influence.Traditional wind farm optimization often uses idealized wake models,neglecting the influence of wind shear at different elevations,which leads to a lack of precision in estimating wake effects and fails to meet the accuracy and reliability requirements of practical engineering.To address this,we have constructed a three-dimensional 3D wind farm optimization model that incorporates elevation,utilizing a 3D wake model to better reflect real-world conditions.We aim to assess the optimization state of the algorithm and provide strong incentives at the right moments to ensure continuous evolution of the population.To this end,we propose an evolutionary adaptation degreeguided genetic algorithm based on power-law perturbation(PPGA)to adapt multidimensional conditions.We select the offshore wind power project in Nantong,Jiangsu,China,as a study example and compare PPGA with other well-performing algorithms under this practical project.Based on the actual wind condition data,the experimental results demonstrate that PPGA can effectively tackle this complex problem and achieve the best power efficiency.
基金Supported by China Postdoctoral Science Foundation(No.20060390660)Science and Technology Development Plan of Tianjin(No.06YFGZGX05600)+1 种基金Scientific Research Foundation of Liu Hui Center for Applied MathematicsNankai University-Tianjin University.
文摘By using a smoothing function,the P nonlinear complementarity problem(P NCP)can be reformulated as a parameterized smooth equation.A Newton method is proposed to solve this equation.The iteration sequence generated by the proposed algorithm is bounded and this algorithm is proved to be globally convergent under an assumption that the P NCP has a nonempty solution set.This assumption is weaker than the ones used in most existing smoothing algorithms.In particular,the solution obtained by the proposed algorithm is shown to be a maximally complementary solution of the P NCP without any additional assumption.
文摘Based on the extraction equilibrium and mass balances in countercurrent extraction systems, a novel method was studied for dealing with the extraction equilibrium and the mass distribution in a multi-component(gamma-component) system. The relationships of mass distribution (x(i), y(i), i = 1, ..., lambda) between two phases were expressed by 2 lambda dimensional simultaneous equations. These simultaneous equations can be converted to a one-dimension nonlinear equation, then it was solved by Newton-Raphson algorithm within a few number of iteration. Compared with the regular calculation method for the 2 lambda dimensional simultaneous equations, Newton-Raphson algorithm can decrease the number of iteration, increase the convergence of the equations and accelerate the speed of simulation. It was verified in many multi-component systems with satisfactory results. As an example, a five-component system is demonstrated in this paper.
