The effect of trace amount of active element Si on the wetting and interface characteristics of 1Cr18Ni11Nb/TiO was investigated. Based on the results, a new binder phase for TiO based cermets imitated gold materials ...The effect of trace amount of active element Si on the wetting and interface characteristics of 1Cr18Ni11Nb/TiO was investigated. Based on the results, a new binder phase for TiO based cermets imitated gold materials was developed, and the related mechanisms were studied. The results indicated that there was small wet-ability of the 1Cr18Ni11Nb alloy on TiO, and the interface binding strength of 1Cr18Ni11Nb/TiO was low. 1.5%Si in 1Cr18Ni11Nb could not only make the alloy wet TiO, but also lead to mutual dissolving near the interface, forming high interface binding strength and matching with the thermal expansion coefficient of TiO.展开更多
The mechanical behaviours of Ti-24Al-11Nb alloy in the brittle-ductile transition (BOT) have been investigated by using three-point bending tests. The temperature dependence of the fractal dimensions and fractal chara...The mechanical behaviours of Ti-24Al-11Nb alloy in the brittle-ductile transition (BOT) have been investigated by using three-point bending tests. The temperature dependence of the fractal dimensions and fractal characterization of fracture surfaces are presented. The probable mechanism controlling BDT of intermetallic alloys are proposed according to fractal geometry.Additionally. it is found that there is a positive relationship between the fractal dimension and fracture toughness in BDT for Ti-24Al-11Nb展开更多
For alloy Ti-24Al-11Nb,stress corrosion cracking(SCC) in methanol solution and hydrogen induced cracking(HIC) during dynamic charging at room temperature have been studied.Experiment has shown that the normalised thre...For alloy Ti-24Al-11Nb,stress corrosion cracking(SCC) in methanol solution and hydrogen induced cracking(HIC) during dynamic charging at room temperature have been studied.Experiment has shown that the normalised threshold stress intensities of SCC failure for various microstructures are KISCC/KC =0.53 0.69 and the threshold value for SCC arresting KISCC/ KIC=0.61-0.79.The threshold values of HIC during dynamic charging are close to that of SCC,but da/dt or fracture time of HIC is one to three orders of magnitude smaller or longer than that of SCC,respectively.The.fracture surface for HIC is also different from that for SCC.For the Ti-24Al-Nb alloy-methanol systein,a kind of inierphase SCC has been found For the microstructures resulting from furnace cooling,SCC initiated and propagated preferentially along theα2/βinterphase boundaries,displaying the microstructure on the fracture surface of SCC.However,there is no interphase SCC for the microstructure resulting from air cooling.展开更多
A special constant deflection device for TEM has been designed, and then change of dislocation configuration ahead of a crack tip during stress corrosion cracking (SCC) of brass in water and of Ti-24Al-11Nb alloy in m...A special constant deflection device for TEM has been designed, and then change of dislocation configuration ahead of a crack tip during stress corrosion cracking (SCC) of brass in water and of Ti-24Al-11Nb alloy in methanol and initiation of SCC can he observed in TEM In situ tensile test in TEM for brass was carried out for comparison The results show that anodic dissolution during SCC can facilitate dislocation emission, multiplication and motion, and a dislocation free zone (DFZ) is formed The stress at a particular site in the DFZ, which is an elastic zone and is thinned gradually through corrosion-enhanced dislocation emission and motion, is possibly up to the cohesive strength, resulting in initiating of a nanocrack of SCC in the DFZ or sometimes at the crack tip. Because of the action of the corrosion solution the nanocrack of SCC propagates into a cleavage or intergranular microcrack rather than blunts into a void like in situ tension in TEM展开更多
The results of tensile test in TEM for a brittle material, Ti-24Al-11Nb alloy, show that a lot of dislocations can also be emitted from a brittle crack tip and a dislocation-free zone (DFZ) is formed. The DFZ is an el...The results of tensile test in TEM for a brittle material, Ti-24Al-11Nb alloy, show that a lot of dislocations can also be emitted from a brittle crack tip and a dislocation-free zone (DFZ) is formed. The DFZ is an elastic zone with large strain and the stress in the DFZ may reach the cohesive strength of the material provided that the crack tip is sharp enough and the applied stress is large enough, resulting in initiating of a nanocrack in the DFZ or sometimes at the crack tip. The nanocrack formed in the DFZ is stable and will propagate into a deavage microcrack through multiplication and movement of dislocations in the plastic zone. Increasing the applied stress, the crack can stably propagate continuously or discontinuously.展开更多
文摘The effect of trace amount of active element Si on the wetting and interface characteristics of 1Cr18Ni11Nb/TiO was investigated. Based on the results, a new binder phase for TiO based cermets imitated gold materials was developed, and the related mechanisms were studied. The results indicated that there was small wet-ability of the 1Cr18Ni11Nb alloy on TiO, and the interface binding strength of 1Cr18Ni11Nb/TiO was low. 1.5%Si in 1Cr18Ni11Nb could not only make the alloy wet TiO, but also lead to mutual dissolving near the interface, forming high interface binding strength and matching with the thermal expansion coefficient of TiO.
文摘The mechanical behaviours of Ti-24Al-11Nb alloy in the brittle-ductile transition (BOT) have been investigated by using three-point bending tests. The temperature dependence of the fractal dimensions and fractal characterization of fracture surfaces are presented. The probable mechanism controlling BDT of intermetallic alloys are proposed according to fractal geometry.Additionally. it is found that there is a positive relationship between the fractal dimension and fracture toughness in BDT for Ti-24Al-11Nb
文摘For alloy Ti-24Al-11Nb,stress corrosion cracking(SCC) in methanol solution and hydrogen induced cracking(HIC) during dynamic charging at room temperature have been studied.Experiment has shown that the normalised threshold stress intensities of SCC failure for various microstructures are KISCC/KC =0.53 0.69 and the threshold value for SCC arresting KISCC/ KIC=0.61-0.79.The threshold values of HIC during dynamic charging are close to that of SCC,but da/dt or fracture time of HIC is one to three orders of magnitude smaller or longer than that of SCC,respectively.The.fracture surface for HIC is also different from that for SCC.For the Ti-24Al-Nb alloy-methanol systein,a kind of inierphase SCC has been found For the microstructures resulting from furnace cooling,SCC initiated and propagated preferentially along theα2/βinterphase boundaries,displaying the microstructure on the fracture surface of SCC.However,there is no interphase SCC for the microstructure resulting from air cooling.
基金Project supported by the National Natural Science Foundation of China.
文摘A special constant deflection device for TEM has been designed, and then change of dislocation configuration ahead of a crack tip during stress corrosion cracking (SCC) of brass in water and of Ti-24Al-11Nb alloy in methanol and initiation of SCC can he observed in TEM In situ tensile test in TEM for brass was carried out for comparison The results show that anodic dissolution during SCC can facilitate dislocation emission, multiplication and motion, and a dislocation free zone (DFZ) is formed The stress at a particular site in the DFZ, which is an elastic zone and is thinned gradually through corrosion-enhanced dislocation emission and motion, is possibly up to the cohesive strength, resulting in initiating of a nanocrack of SCC in the DFZ or sometimes at the crack tip. Because of the action of the corrosion solution the nanocrack of SCC propagates into a cleavage or intergranular microcrack rather than blunts into a void like in situ tension in TEM
基金Project supported by the National Natural Science Foundation of China.
文摘The results of tensile test in TEM for a brittle material, Ti-24Al-11Nb alloy, show that a lot of dislocations can also be emitted from a brittle crack tip and a dislocation-free zone (DFZ) is formed. The DFZ is an elastic zone with large strain and the stress in the DFZ may reach the cohesive strength of the material provided that the crack tip is sharp enough and the applied stress is large enough, resulting in initiating of a nanocrack in the DFZ or sometimes at the crack tip. The nanocrack formed in the DFZ is stable and will propagate into a deavage microcrack through multiplication and movement of dislocations in the plastic zone. Increasing the applied stress, the crack can stably propagate continuously or discontinuously.
