The haemocompatibility of Ti-3Zr-2Sn-3Mo-25Nb biomedical alloy was studied after surface heparinization. A layer of sol-gel TiO2 films was applied on the alloy samples followed by active treatment in the bio-functiona...The haemocompatibility of Ti-3Zr-2Sn-3Mo-25Nb biomedical alloy was studied after surface heparinization. A layer of sol-gel TiO2 films was applied on the alloy samples followed by active treatment in the bio-functionalized solution for introducing the OH- and groups, and then the heparin was immobilized on the active TiO2 films through the electrostatic self assembly technology. It is shown that the heparinized films are mainly composed of anatase and rutile with smooth and dense surface. In vitro blood compatibility was evaluated by haemolysis test, clotting time and platelet adhesion behavior tests. The results show that the haemocompatibility of the alloy could be significantly improved by surface heparinization.展开更多
Oxide-supported transition metal systems have been the subject of enormous interest due to the improvement of catalytic properties relative to the separate metal.Thus in this paper,we embark on a systematic study for ...Oxide-supported transition metal systems have been the subject of enormous interest due to the improvement of catalytic properties relative to the separate metal.Thus in this paper,we embark on a systematic study for Pd n （n=1-5） clusters adsorbed on TiO2 （110） surface based on DFT-GGA calculations utilizing periodic supercell models.A single Pd adatom on the defect-free surface prefers to adsorb at a hollow site bridging a protruded oxygen and a five-fold titanium atom along the [110] direction,while Pd dimer is located on the channels with the Pd-Pd bond parallel to the surface.According to the transition states （TSs） search,the adsorbed Pd trimer tends to triangular growth mode,rather than linear mode,while the Pd4 and Pd5 clusters prefer three-dimensional （3D） models.However,the oxygen vacancy has almost no influence on the promotion of Pd n cluster nucleation.Additionally,of particular significance is that the Pd-TiO2 interaction is the main driving force at the beginning of Pd nucleation,whereas the Pd-Pd interaction gets down to control the growth process of Pd cluster as the cluster gets larger.It is hoped that our theoretical study would shed light on further designing high-performance TiO2 supported Pd-based catalysts.展开更多
The Cr doped into TiO2(110) surface has been studied systematically by using periodic DFT/B3LYP method with slab model. It is found that doping Cr into perfect TiO2 (110) surface can reduce the value of band-gap from ...The Cr doped into TiO2(110) surface has been studied systematically by using periodic DFT/B3LYP method with slab model. It is found that doping Cr into perfect TiO2 (110) surface can reduce the value of band-gap from 3.13 to 1.16 eV, and then photocatalysis reaction may be achieved in visual light area. The results are in good agreement with the experiments.展开更多
Photocatalytic degradation of gaseous pollutants on Bi-based semiconductors under solar lightirradiation has attracted significant attention.However,their application in gaseous straight-chainalkane purification is st...Photocatalytic degradation of gaseous pollutants on Bi-based semiconductors under solar lightirradiation has attracted significant attention.However,their application in gaseous straight-chainalkane purification is still rare.Here,a series of Bi/BiOBr composites were solvothermally synthe-sized and applied in solar-light-driven photocatalytic degradation of gaseous n-hexane.The charac-terization results revealed that both increasing number of functional groups of alcohol solvent(from methanol and ethylene glycol to glycerol)and solvothermal temperature(from 160 and 180to 200℃)facilitated the in-situ formation of metallic Bi nanospheres on BiOBr nanoplates withexposed(110)facets.Meanwhile,chemical bonding between Bi and BiOBr was observed on theseexposed facets that resulted in the formation of surface oxygen vacancy.Furthermore,the synergis-tic effect of optimum surface oxygen vacancy on exposed(110)facets led to a high visible light re-sponse,narrow band gap,great photocurrent,low recombination rate of the charge carriers,andstrong·O2-and h*formation,all of which resulted in the highest removal efficiency of 97.4%within120 min of 15 ppmv of n-hexane on Bi/BiOBr.Our findings efficiently broaden the application ofBi-based photocatalysis technology in the purification of gaseous straight-chain pollutants emittedby the petrochemical industry.展开更多
The structural and electronic properties of TiC（110） surfaces are calculated using the first-principles total-energy plane-wave pseudopotential method based on density functional theory. The calculated results of st...The structural and electronic properties of TiC（110） surfaces are calculated using the first-principles total-energy plane-wave pseudopotential method based on density functional theory. The calculated results of structural relaxation and surface energy for TiC（110） slab indicate that slab with 7 layers shows bulk-like characteristic interiors, and the changes of slab occur on the outmost three layers, which shows that the relaxation only influences the top three layers. Meanwhile, the strong Ti—C covalent bonding can be found in the distribution of charge density on the （100） plane. The interlayer Ti—C chemical bonds are reinforced and the outermost interlayer distance is reduced as a result of the charge depletion in the vacuum and the charge accumulations in the interlayer region between the first and second layers. The surface energy of TiC（110） is calculated to be 3.53 J/m2.展开更多
First-principles calculations based on density functional theory corrected by Hubbard parameter U （DFT＋U） are applied to the study on the co-adsorption of O2 and H2O molecules to a-U（110） surface. The calculation...First-principles calculations based on density functional theory corrected by Hubbard parameter U （DFT＋U） are applied to the study on the co-adsorption of O2 and H2O molecules to a-U（110） surface. The calculation results show that DFT＋U method with Ueff = 1.5 eV can yield the experimental results of lattice constant and elastic modulus of a-uranium bulk well. Of all 7 low index surfaces of a-uranium, the （001） surface is the most stable with lowest surface energy while the （110） surface possesses the strongest activity with the highest surface energy. The adsorptions of O2 and H2O molecules are investigated separated. The O2 dissociates spontaneously in all initial configurations. For the adsorption of H2O molecule, both molecular and dissociative adsorptionsoccur. Through calculations of co-adsorption, it can be confirmed that the inhibition effect of O2 on the corrosion of uranium by water vapor originates from the preferential adsorption mechanism, while the consumption of H atoms by O atoms exerted little influence on the corrosion of uranium.展开更多
Current Ti-based orthopedic implants often suffer from fatigue damage,therefore shortening their service lifespan.To solve this issue,in this study,mechanically polished Ti-6Al-7Nb(P-Ti6Al7Nb)was subjected to surface ...Current Ti-based orthopedic implants often suffer from fatigue damage,therefore shortening their service lifespan.To solve this issue,in this study,mechanically polished Ti-6Al-7Nb(P-Ti6Al7Nb)was subjected to surface mechanical attrition treatment(SMAT).Effects of various SMAT process parameters,including ball diameter and treatment duration,on the surface integrity of P-Ti6Al7Nb were investigated,specifically in terms of surface quality,surface nanocrystalline layer,and residual stress.Subsequently,the microstructure,in-depth residual stress and microhardness distributions,surface roughness,and fatigue behavior in simulated body fluids of optimally SMATed Ti-6Al-7Nb(S-Ti6Al7Nb)were examined and compared to those of P-Ti6Al7Nb.Results showed that based on the experimental conditions established in the present research,the optimal parameters were determined to be a 3 mm ball diameter and a 15 min treatment duration,which resulted in excellent surface integrity;S-Ti6Al7Nb showed a 300μm-thick gradient nanostructured layer comprising the thickest nanocrystalline layer of about 20μm,a 1000μm-deep residual compressive stress field with the maximum surface residual compressive stress,and a microconcave topography but free of any defects or cracks.The microstructural evolution mechanism was also elucidated,revealing that the combination of multidirectional primary and secondary twins’intersections and twin-dislocation interactions contributed to grain refinement.Compared to P-Ti6Al7Nb,S-Ti6Al7Nb exhibited a 40%improvement in fatigue strength,owing to synergistic effects of the gradient nanostructured layer,surface work hardening,high amplitude of residual compressive stress,and improved surface integrity.These factors effectively prevented the initiation of fatigue crack at the surface and shifted it to the sublayer,and inhibited the subsequent crack propagation.展开更多
The Ti−45Nb(wt.%)alloy properties were investigated in relation to its potential biomedical use.Laser surface modification was utilized to improve its performance in biological systems.As a result of the laser treatme...The Ti−45Nb(wt.%)alloy properties were investigated in relation to its potential biomedical use.Laser surface modification was utilized to improve its performance in biological systems.As a result of the laser treatment,(Ti,Nb)O scale was formed and various morphological features appeared on the alloy surface.The electrochemical behavior of Ti−45Nb alloy in simulated body conditions was evaluated and showed that the alloy was highly resistant to corrosion deterioration regardless of additional laser surface modification treatment.Nevertheless,the improved corrosion resistance after laser treatment was evident(the corrosion current density of the alloy before laser irradiation was 2.84×10^(−8)A/cm^(2),while that after laser treatment with 5 mJ was 0.65×10^(−8)A/cm^(2))and ascribed to the rapid formation of a complex and passivating bi-modal surface oxide layer.Alloy cytotoxicity and effects of the Ti−45Nb alloy laser surface modification on the MRC-5 cell viability,morphology,and proliferation were also investigated.The Ti−45Nb alloy showed no cytotoxic effect.Moreover,cells showed improved viability and adherence to the alloy surface after the laser irradiation treatment.The highest average cell viability of 115.37%was attained for the alloy laser-irradiated with 15 mJ.Results showed that the laser surface modification can be successfully utilized to significantly improve alloy performance in a biological environment.展开更多
MgH2 is a promising and popular hydrogen storage material.In this work,the hydrogen desorption reactions of a single Pd atom adsorbed MgH2(110)surface are investigated by using first-principles density functional theo...MgH2 is a promising and popular hydrogen storage material.In this work,the hydrogen desorption reactions of a single Pd atom adsorbed MgH2(110)surface are investigated by using first-principles density functional theory calculations.We find that a single Pd atom adsorbed on the MgH2(110)surface can significantly lower the energy barrier of the hydrogen desorption reactions from 1.802 eV for pure MgH2(110)surface to 1.154 eV for Pd adsorbed MgH2(110)surface,indicating a strong Pd single-atom catalytic effect on the hydrogen desorption reactions.Furthermore,the Pd single-atom catalysis significantly reduces the hydrogen desorption temperature from 573K to 367K,which makes the hydrogen desorption reactions occur more easily and quickly on the MgH2(110)surface.We also discuss the microscopic process of the hydrogen desorption reactions through the reverse process of hydrogen spillover mechanism on the MgH2(110)surface.This study shows that Pd/MgH2 thin films can be used as good hydrogen storage materials in future experiments.展开更多
The reduced SnO2（110） surface has been investigated by using first-principles method with a slab model. By examining the vacancy formation energy of three kinds of reduced SnO2（110） surfaces, the most energeticall...The reduced SnO2（110） surface has been investigated by using first-principles method with a slab model. By examining the vacancy formation energy of three kinds of reduced SnO2（110） surfaces, the most energetically favorable defect surface is confirmed to be the surface with the coexistence of bridging and in-plane oxygen vacancies, which is different with the traditional model by only removing bridging oxygen. The results of band structure calculations indicate that the electronic structure of this defect surface is similar to the SnO surface.展开更多
The modified analytic embedded-atom method and molecular dynamics simulations are applied to the investigation of the surface premelting and melting behaviours of the V（110） plane by calculating the interlayer relax...The modified analytic embedded-atom method and molecular dynamics simulations are applied to the investigation of the surface premelting and melting behaviours of the V（110） plane by calculating the interlayer relaxation, the layer structure factor and atomic snapshots in this paper. The results obtained indicate that the premelting phenomenon occurs on the V（110） surface at about 1800K and then a liquid-like layer, which approximately keeps the same thickness up to 2020K, emerges on it. We discover that the temperature 2020K the V（110） surface starts to melt and is in a completely disordered state at the temperature of 2140K under the melting point for the bulk vanadium.展开更多
The atomic-scale surface roughness of Si(110) reconstructed via high-temperature Ar annealing is immediately increased by non uniform accidental oxidation during the unloading process (called reflow oxidation) during ...The atomic-scale surface roughness of Si(110) reconstructed via high-temperature Ar annealing is immediately increased by non uniform accidental oxidation during the unloading process (called reflow oxidation) during high-temperature Ar annealing. In particular, for a reconstructed Si(110) surface, characteristic line-shaped oxidation occurs at preferential oxidation sites appearing in pentagonal pairs in the directions of Si[-112] and/or [-11-2]. We previously reported that the roughness increase of reconstructed Si(110) due to reflow oxidation can be restrained by replacing Ar gas with H2 gas at 1000°C during the cooling to 100°C after high-temperature Ar annealing. It was speculated that preferential oxidation sites on reconstructed Si(110) were eliminated by H2 gas etching and hydrogen termination of dangling bonds. Thus, it is necessary to investigate the effect of H2 gas etching and hydrogen termination behavior on the reconstructed Si(110) surface structure. In this study, we evaluated in detail the relationship between the temperature at which the H2 gas replaces the Ar in high-temperature Ar annealing and the reconstructed Si(110) surface structure. The maximum height of the roughness on the reconstructed surface was the same as if Ar gas was used when the H2 gas introduction temperature was 200°C, although the amount of reflow oxidation was decreased to 70% by hydrogen termination. Furthermore, line-shaped oxidation still occurs when H2 gas replaces Ar at this low temperature. Therefore, we conclude that oxidation is caused by slight Si etching at low temperatures, and thus the preferential oxidation sites on the reconstructed structure must be eliminated by hydrogen etching in order to form an atomically smooth Si(110) surface.展开更多
The density functional theory（DFT） and self-consistent periodic calculation were used to investigate the C2Hx（x = 4～6） species adsorption on the Fe（110） surface. The adsorption energy and equilibrium geometry o...The density functional theory（DFT） and self-consistent periodic calculation were used to investigate the C2Hx（x = 4～6） species adsorption on the Fe（110） surface. The adsorption energy and equilibrium geometry of the species C2Hx（x = 4～6） on four possible sites（top,hcp,SB and LB） on the Fe（110） surface were predicted and compared. Mulliken charges and density of states analysis of the most stable site have been discussed. It is found that the species of C2H6 and C2H5 are adsorbed strongly on the Fe（110） surface with calculated adsorption energy of -80.24 and -178.89 kJ·mol^-1 at the Fe-LB（long-bridge） ,respectively. However,the C2H4 is adsorbed strongly on the Fe（110） surface with calculated adsorption energies of -114.96 kJ·mol^-1 at the top. The results indicate that the charge transferring process can be completed by chemisorption between Fe（110） surface and the species. Moreover,the chemical bands can be formed by chemisorptions between the Fe（110） surface and the species,too.展开更多
The Ti-45Nb (mass%) alloy’s corrosive and biocompatible response in simulated physiological conditions was investigated before and after its additional high-pressure torsion (HPT) and laser irradiation processing. Th...The Ti-45Nb (mass%) alloy’s corrosive and biocompatible response in simulated physiological conditions was investigated before and after its additional high-pressure torsion (HPT) and laser irradiation processing. The grain size reduction from 2.76 µm to ~ 200 nm and the appearance of laser-induced morphologically altered and highly oxidized surface led to the significant improvement of alloy corrosion resistance and cell–implant interaction. Moreover, an additional increase of the laser pulse energy from 5 to 15 mJ during the alloy irradiation in the air led to an increase in the surface oxygen content from 13.64 to 23.89% accompanied by an increase of excellent cell viability from 127.18 to 134.42%. As a result of the controlled alloy microstructural and surface modifications, the formation of protective bi-modal mixed Ti- and Nb-oxide external scale was enabled. The presence of this surface oxide scale enhanced the alloy’s resistance to corrosion deterioration and simultaneously boosted cell viability and proliferation.展开更多
Cyclohexane is a high-valued chemical receivingsignificant interest in liquid hydrogen storage technology.TiO_(2)-based catalysts show high performance in the photocatalytic dehydrogenation of cyclohexane under mild c...Cyclohexane is a high-valued chemical receivingsignificant interest in liquid hydrogen storage technology.TiO_(2)-based catalysts show high performance in the photocatalytic dehydrogenation of cyclohexane under mild conditions,but the detailed reaction mechanism is not well understood.With the surface science approaches,we have studied the adsorption and surface chemistry of cyclohexane on rutile TiO_(2)(110).The thermal desorption spectroscopy and X-ray photoelectron spectroscopy results both demonstrate the molecular adsorption of cyclohexane on rutile TiO_(2)(110).Upon the UV Hg light irradiation,photodesorption of cyclohexane occurs from both the chemisorbed monolayer and the multilayer.No decomposition nor dehydrogenation of cyclohexane occurs on rutile TiO_(2)(110).These results deepen the fundamental understanding of the surface chemistry of cyclohexane on the TiO_(2) surface.展开更多
The binding energies of ethylene oxide (Et-O) adsorbed on Cu(110) surface for different adsorption sites and orientations are calculated with an atom superposition and electron delocalization molecular orbital (ASED-M...The binding energies of ethylene oxide (Et-O) adsorbed on Cu(110) surface for different adsorption sites and orientations are calculated with an atom superposition and electron delocalization molecular orbital (ASED-MO) using cluster models. It shows that the top site of Cu(110) surface is preferable for Et-O adsorption and the orientation of C-C bond of Et-O is parallel to the [110] direction of the substratc. The distance of an oxygen of Et-O to the Cu atom is approximately 1.5817(?). It is different from the supposition of C. Benndorf et al., in which the oxygen was proposed on the short bridge site with C-C bond orientating to [110] direction of Cu(110)展开更多
The preparation, characterization and properties of titania overlayer on Fe(110) substrate is hereby reported. The TiO_X overlayer was found to form in a layer-by-layer mode with a suboxide of titanium in the form of ...The preparation, characterization and properties of titania overlayer on Fe(110) substrate is hereby reported. The TiO_X overlayer was found to form in a layer-by-layer mode with a suboxide of titanium in the form of TiO migrating into the Fe substrate and Fe migrating into the deposited layer of TiO_X simultaneously during the deposition.展开更多
The interaction of reactants with catalysts has always been an important subject for catalytic reactions.As a promising catalyst with versatile applications,titania has been intensively studied for decades.In this wor...The interaction of reactants with catalysts has always been an important subject for catalytic reactions.As a promising catalyst with versatile applications,titania has been intensively studied for decades.In this work we have investigated the role of bridge bonded oxygen vacancy(O_(v))in methyl groups and carbon monoxide(CO)adsorption on rutile TiO_(2)(110)(R-TiO_(2)(110))with the temperature programmed desorption technique.The results show a clear different tendency of the desorption of methyl groups adsorbed on bridge bonded oxygen(O_(b)),and CO molecules on the five coordinate Ti^(4+)sites(Ti_(5c))as the Ovconcentration changes,suggesting that the surface defects may have crucial influence on the absorption of species on different sites of R-TiO_(2)(110).展开更多
The studies of NO chemisorption on TiO2(110) surface are the base of research to NO decomposed to N2O on TiO2 surface. In this paper, 12 kinds of possible models of NO adsorbed on TiO2 perfect and defect surface were ...The studies of NO chemisorption on TiO2(110) surface are the base of research to NO decomposed to N2O on TiO2 surface. In this paper, 12 kinds of possible models of NO adsorbed on TiO2 perfect and defect surface were calculated by use of ab initio cluster method. We carried out optimization of the geometry, calculation of the chemisorption energy and analysis of the Mulliken population to those adsorption models. According to the calculation results, it can be got that the adsorbed decomposition of NO on defect surface is more advantageous and M6 and M12 are the important models to NO chemisorption and decomposition on TiO2 surface.展开更多
基金Project (31100693/C100302) supported by the National Natural Science Foundation of ChinaProject (31011120049) supported by the Australia-China Special Fund, International Science Linkages Program co-supported by the Department of Innovation, Industry, Science and Research of Australia, and the Ministry of Science and Technology and National Science Foundation of China+1 种基金Project(2010ZDKG-96) supported by the Major Subject of "13115" Programs of Shaan’xi Province, ChinaProject (2012CB619102) supported by the National Basic Research Program of China
文摘The haemocompatibility of Ti-3Zr-2Sn-3Mo-25Nb biomedical alloy was studied after surface heparinization. A layer of sol-gel TiO2 films was applied on the alloy samples followed by active treatment in the bio-functionalized solution for introducing the OH- and groups, and then the heparin was immobilized on the active TiO2 films through the electrostatic self assembly technology. It is shown that the heparinized films are mainly composed of anatase and rutile with smooth and dense surface. In vitro blood compatibility was evaluated by haemolysis test, clotting time and platelet adhesion behavior tests. The results show that the haemocompatibility of the alloy could be significantly improved by surface heparinization.
基金supported by the National Natural Science Foundation of China (90922022)the Foundation of State Key Laboratory of Coal Combustion of Huazhong University of Science and Technology (FSKLCC1110)the Natural Science Foundation of Fujian Province,China (2012J01032,2012J01041)
文摘Oxide-supported transition metal systems have been the subject of enormous interest due to the improvement of catalytic properties relative to the separate metal.Thus in this paper,we embark on a systematic study for Pd n （n=1-5） clusters adsorbed on TiO2 （110） surface based on DFT-GGA calculations utilizing periodic supercell models.A single Pd adatom on the defect-free surface prefers to adsorb at a hollow site bridging a protruded oxygen and a five-fold titanium atom along the [110] direction,while Pd dimer is located on the channels with the Pd-Pd bond parallel to the surface.According to the transition states （TSs） search,the adsorbed Pd trimer tends to triangular growth mode,rather than linear mode,while the Pd4 and Pd5 clusters prefer three-dimensional （3D） models.However,the oxygen vacancy has almost no influence on the promotion of Pd n cluster nucleation.Additionally,of particular significance is that the Pd-TiO2 interaction is the main driving force at the beginning of Pd nucleation,whereas the Pd-Pd interaction gets down to control the growth process of Pd cluster as the cluster gets larger.It is hoped that our theoretical study would shed light on further designing high-performance TiO2 supported Pd-based catalysts.
基金This work was supported by the State Key Laboratory of Structural Chemistry, the National Natural Science Foundation of China (20273013), and the Education Foundation of Fujian Province (JA03007)
文摘The Cr doped into TiO2(110) surface has been studied systematically by using periodic DFT/B3LYP method with slab model. It is found that doping Cr into perfect TiO2 (110) surface can reduce the value of band-gap from 3.13 to 1.16 eV, and then photocatalysis reaction may be achieved in visual light area. The results are in good agreement with the experiments.
文摘Photocatalytic degradation of gaseous pollutants on Bi-based semiconductors under solar lightirradiation has attracted significant attention.However,their application in gaseous straight-chainalkane purification is still rare.Here,a series of Bi/BiOBr composites were solvothermally synthe-sized and applied in solar-light-driven photocatalytic degradation of gaseous n-hexane.The charac-terization results revealed that both increasing number of functional groups of alcohol solvent(from methanol and ethylene glycol to glycerol)and solvothermal temperature(from 160 and 180to 200℃)facilitated the in-situ formation of metallic Bi nanospheres on BiOBr nanoplates withexposed(110)facets.Meanwhile,chemical bonding between Bi and BiOBr was observed on theseexposed facets that resulted in the formation of surface oxygen vacancy.Furthermore,the synergis-tic effect of optimum surface oxygen vacancy on exposed(110)facets led to a high visible light re-sponse,narrow band gap,great photocurrent,low recombination rate of the charge carriers,andstrong·O2-and h*formation,all of which resulted in the highest removal efficiency of 97.4%within120 min of 15 ppmv of n-hexane on Bi/BiOBr.Our findings efficiently broaden the application ofBi-based photocatalysis technology in the purification of gaseous straight-chain pollutants emittedby the petrochemical industry.
基金Project (200902554) supported by National Post-doctor Foundation, ChinaProject (200802015) supported by the Post-Doctor Foundation of Shandong Province, China
文摘The structural and electronic properties of TiC（110） surfaces are calculated using the first-principles total-energy plane-wave pseudopotential method based on density functional theory. The calculated results of structural relaxation and surface energy for TiC（110） slab indicate that slab with 7 layers shows bulk-like characteristic interiors, and the changes of slab occur on the outmost three layers, which shows that the relaxation only influences the top three layers. Meanwhile, the strong Ti—C covalent bonding can be found in the distribution of charge density on the （100） plane. The interlayer Ti—C chemical bonds are reinforced and the outermost interlayer distance is reduced as a result of the charge depletion in the vacuum and the charge accumulations in the interlayer region between the first and second layers. The surface energy of TiC（110） is calculated to be 3.53 J/m2.
基金Project supported by the National Nature Science Foundation of China(Grant Nos.51401237,11474358,and 51271198)
文摘First-principles calculations based on density functional theory corrected by Hubbard parameter U （DFT＋U） are applied to the study on the co-adsorption of O2 and H2O molecules to a-U（110） surface. The calculation results show that DFT＋U method with Ueff = 1.5 eV can yield the experimental results of lattice constant and elastic modulus of a-uranium bulk well. Of all 7 low index surfaces of a-uranium, the （001） surface is the most stable with lowest surface energy while the （110） surface possesses the strongest activity with the highest surface energy. The adsorptions of O2 and H2O molecules are investigated separated. The O2 dissociates spontaneously in all initial configurations. For the adsorption of H2O molecule, both molecular and dissociative adsorptionsoccur. Through calculations of co-adsorption, it can be confirmed that the inhibition effect of O2 on the corrosion of uranium by water vapor originates from the preferential adsorption mechanism, while the consumption of H atoms by O atoms exerted little influence on the corrosion of uranium.
基金supported by the National Natural Science Foundation of China(Grant Nos.51631007 and 51971171).
文摘Current Ti-based orthopedic implants often suffer from fatigue damage,therefore shortening their service lifespan.To solve this issue,in this study,mechanically polished Ti-6Al-7Nb(P-Ti6Al7Nb)was subjected to surface mechanical attrition treatment(SMAT).Effects of various SMAT process parameters,including ball diameter and treatment duration,on the surface integrity of P-Ti6Al7Nb were investigated,specifically in terms of surface quality,surface nanocrystalline layer,and residual stress.Subsequently,the microstructure,in-depth residual stress and microhardness distributions,surface roughness,and fatigue behavior in simulated body fluids of optimally SMATed Ti-6Al-7Nb(S-Ti6Al7Nb)were examined and compared to those of P-Ti6Al7Nb.Results showed that based on the experimental conditions established in the present research,the optimal parameters were determined to be a 3 mm ball diameter and a 15 min treatment duration,which resulted in excellent surface integrity;S-Ti6Al7Nb showed a 300μm-thick gradient nanostructured layer comprising the thickest nanocrystalline layer of about 20μm,a 1000μm-deep residual compressive stress field with the maximum surface residual compressive stress,and a microconcave topography but free of any defects or cracks.The microstructural evolution mechanism was also elucidated,revealing that the combination of multidirectional primary and secondary twins’intersections and twin-dislocation interactions contributed to grain refinement.Compared to P-Ti6Al7Nb,S-Ti6Al7Nb exhibited a 40%improvement in fatigue strength,owing to synergistic effects of the gradient nanostructured layer,surface work hardening,high amplitude of residual compressive stress,and improved surface integrity.These factors effectively prevented the initiation of fatigue crack at the surface and shifted it to the sublayer,and inhibited the subsequent crack propagation.
基金the Ministry of Science,Technological Development and Innovation of the Republic of Serbia(No.451-03-47/2023-01/200017)the PhD fellowship of Slađana LAKETIĆ.Authors would also like to acknowledge the help of Dr.Anton HOHENWARTER from the Department of Materials Science,Montanuniversitat Leoben,Austria,during the Ti−45Nb alloy microstructural analysis.
文摘The Ti−45Nb(wt.%)alloy properties were investigated in relation to its potential biomedical use.Laser surface modification was utilized to improve its performance in biological systems.As a result of the laser treatment,(Ti,Nb)O scale was formed and various morphological features appeared on the alloy surface.The electrochemical behavior of Ti−45Nb alloy in simulated body conditions was evaluated and showed that the alloy was highly resistant to corrosion deterioration regardless of additional laser surface modification treatment.Nevertheless,the improved corrosion resistance after laser treatment was evident(the corrosion current density of the alloy before laser irradiation was 2.84×10^(−8)A/cm^(2),while that after laser treatment with 5 mJ was 0.65×10^(−8)A/cm^(2))and ascribed to the rapid formation of a complex and passivating bi-modal surface oxide layer.Alloy cytotoxicity and effects of the Ti−45Nb alloy laser surface modification on the MRC-5 cell viability,morphology,and proliferation were also investigated.The Ti−45Nb alloy showed no cytotoxic effect.Moreover,cells showed improved viability and adherence to the alloy surface after the laser irradiation treatment.The highest average cell viability of 115.37%was attained for the alloy laser-irradiated with 15 mJ.Results showed that the laser surface modification can be successfully utilized to significantly improve alloy performance in a biological environment.
基金supported by the National Key Basic Research Program(No.2011CB921404)National Natural Science Foundation of China(No.21421063,No.91021004,No.21233007,No.21803066)+2 种基金Strategic Priority Research Program of Chinese Academy of Sciences(No.XDC01000000)Research Start-Up Grants(No.KY2340000094)from University of Science and Technology of Chinathe Chinese Academy of Sciences Pioneer Hundred Talents Program
文摘MgH2 is a promising and popular hydrogen storage material.In this work,the hydrogen desorption reactions of a single Pd atom adsorbed MgH2(110)surface are investigated by using first-principles density functional theory calculations.We find that a single Pd atom adsorbed on the MgH2(110)surface can significantly lower the energy barrier of the hydrogen desorption reactions from 1.802 eV for pure MgH2(110)surface to 1.154 eV for Pd adsorbed MgH2(110)surface,indicating a strong Pd single-atom catalytic effect on the hydrogen desorption reactions.Furthermore,the Pd single-atom catalysis significantly reduces the hydrogen desorption temperature from 573K to 367K,which makes the hydrogen desorption reactions occur more easily and quickly on the MgH2(110)surface.We also discuss the microscopic process of the hydrogen desorption reactions through the reverse process of hydrogen spillover mechanism on the MgH2(110)surface.This study shows that Pd/MgH2 thin films can be used as good hydrogen storage materials in future experiments.
基金The project was supported by the National Natural Science Foundation of China (20673019)the Specialized Research Fund for the Doctoral Program of Higher Education (20060386001)Fujian Provincial Government (Z0513005, 2005HZ01-2-6)
文摘The reduced SnO2（110） surface has been investigated by using first-principles method with a slab model. By examining the vacancy formation energy of three kinds of reduced SnO2（110） surfaces, the most energetically favorable defect surface is confirmed to be the surface with the coexistence of bridging and in-plane oxygen vacancies, which is different with the traditional model by only removing bridging oxygen. The results of band structure calculations indicate that the electronic structure of this defect surface is similar to the SnO surface.
基金supported by the National Natural Science Foundation of China (Grant No 50671035)the Scientific Research Fund of Hunan Provincial Education Department of China (Grant No 07C445)the Grant of the 11th Five-year Plan for Key Construction Academic Subject of Hunan Province,China
文摘The modified analytic embedded-atom method and molecular dynamics simulations are applied to the investigation of the surface premelting and melting behaviours of the V（110） plane by calculating the interlayer relaxation, the layer structure factor and atomic snapshots in this paper. The results obtained indicate that the premelting phenomenon occurs on the V（110） surface at about 1800K and then a liquid-like layer, which approximately keeps the same thickness up to 2020K, emerges on it. We discover that the temperature 2020K the V（110） surface starts to melt and is in a completely disordered state at the temperature of 2140K under the melting point for the bulk vanadium.
文摘The atomic-scale surface roughness of Si(110) reconstructed via high-temperature Ar annealing is immediately increased by non uniform accidental oxidation during the unloading process (called reflow oxidation) during high-temperature Ar annealing. In particular, for a reconstructed Si(110) surface, characteristic line-shaped oxidation occurs at preferential oxidation sites appearing in pentagonal pairs in the directions of Si[-112] and/or [-11-2]. We previously reported that the roughness increase of reconstructed Si(110) due to reflow oxidation can be restrained by replacing Ar gas with H2 gas at 1000°C during the cooling to 100°C after high-temperature Ar annealing. It was speculated that preferential oxidation sites on reconstructed Si(110) were eliminated by H2 gas etching and hydrogen termination of dangling bonds. Thus, it is necessary to investigate the effect of H2 gas etching and hydrogen termination behavior on the reconstructed Si(110) surface structure. In this study, we evaluated in detail the relationship between the temperature at which the H2 gas replaces the Ar in high-temperature Ar annealing and the reconstructed Si(110) surface structure. The maximum height of the roughness on the reconstructed surface was the same as if Ar gas was used when the H2 gas introduction temperature was 200°C, although the amount of reflow oxidation was decreased to 70% by hydrogen termination. Furthermore, line-shaped oxidation still occurs when H2 gas replaces Ar at this low temperature. Therefore, we conclude that oxidation is caused by slight Si etching at low temperatures, and thus the preferential oxidation sites on the reconstructed structure must be eliminated by hydrogen etching in order to form an atomically smooth Si(110) surface.
基金Project supported by the Natural Science Foundation of Education Committee of Chongqing (No. KJ091311)
文摘The density functional theory（DFT） and self-consistent periodic calculation were used to investigate the C2Hx（x = 4～6） species adsorption on the Fe（110） surface. The adsorption energy and equilibrium geometry of the species C2Hx（x = 4～6） on four possible sites（top,hcp,SB and LB） on the Fe（110） surface were predicted and compared. Mulliken charges and density of states analysis of the most stable site have been discussed. It is found that the species of C2H6 and C2H5 are adsorbed strongly on the Fe（110） surface with calculated adsorption energy of -80.24 and -178.89 kJ·mol^-1 at the Fe-LB（long-bridge） ,respectively. However,the C2H4 is adsorbed strongly on the Fe（110） surface with calculated adsorption energies of -114.96 kJ·mol^-1 at the top. The results indicate that the charge transferring process can be completed by chemisorption between Fe（110） surface and the species. Moreover,the chemical bands can be formed by chemisorptions between the Fe（110） surface and the species,too.
基金supported by the Ministry of Science,Technological Development and Innovation of the Republic of Serbia through Contract Nos.451-03-47/2023-01/200017 and 451-03-66/2024-03/200017 and the Ph.D.fellowship of Slađana Laketić.
文摘The Ti-45Nb (mass%) alloy’s corrosive and biocompatible response in simulated physiological conditions was investigated before and after its additional high-pressure torsion (HPT) and laser irradiation processing. The grain size reduction from 2.76 µm to ~ 200 nm and the appearance of laser-induced morphologically altered and highly oxidized surface led to the significant improvement of alloy corrosion resistance and cell–implant interaction. Moreover, an additional increase of the laser pulse energy from 5 to 15 mJ during the alloy irradiation in the air led to an increase in the surface oxygen content from 13.64 to 23.89% accompanied by an increase of excellent cell viability from 127.18 to 134.42%. As a result of the controlled alloy microstructural and surface modifications, the formation of protective bi-modal mixed Ti- and Nb-oxide external scale was enabled. The presence of this surface oxide scale enhanced the alloy’s resistance to corrosion deterioration and simultaneously boosted cell viability and proliferation.
基金This work is supported by the National Natural Science Foundation of China(No.22202191).
文摘Cyclohexane is a high-valued chemical receivingsignificant interest in liquid hydrogen storage technology.TiO_(2)-based catalysts show high performance in the photocatalytic dehydrogenation of cyclohexane under mild conditions,but the detailed reaction mechanism is not well understood.With the surface science approaches,we have studied the adsorption and surface chemistry of cyclohexane on rutile TiO_(2)(110).The thermal desorption spectroscopy and X-ray photoelectron spectroscopy results both demonstrate the molecular adsorption of cyclohexane on rutile TiO_(2)(110).Upon the UV Hg light irradiation,photodesorption of cyclohexane occurs from both the chemisorbed monolayer and the multilayer.No decomposition nor dehydrogenation of cyclohexane occurs on rutile TiO_(2)(110).These results deepen the fundamental understanding of the surface chemistry of cyclohexane on the TiO_(2) surface.
文摘The binding energies of ethylene oxide (Et-O) adsorbed on Cu(110) surface for different adsorption sites and orientations are calculated with an atom superposition and electron delocalization molecular orbital (ASED-MO) using cluster models. It shows that the top site of Cu(110) surface is preferable for Et-O adsorption and the orientation of C-C bond of Et-O is parallel to the [110] direction of the substratc. The distance of an oxygen of Et-O to the Cu atom is approximately 1.5817(?). It is different from the supposition of C. Benndorf et al., in which the oxygen was proposed on the short bridge site with C-C bond orientating to [110] direction of Cu(110)
文摘The preparation, characterization and properties of titania overlayer on Fe(110) substrate is hereby reported. The TiO_X overlayer was found to form in a layer-by-layer mode with a suboxide of titanium in the form of TiO migrating into the Fe substrate and Fe migrating into the deposited layer of TiO_X simultaneously during the deposition.
基金supported by the National Natural Science Foundation of China (No.21973084 and No.21803056)。
文摘The interaction of reactants with catalysts has always been an important subject for catalytic reactions.As a promising catalyst with versatile applications,titania has been intensively studied for decades.In this work we have investigated the role of bridge bonded oxygen vacancy(O_(v))in methyl groups and carbon monoxide(CO)adsorption on rutile TiO_(2)(110)(R-TiO_(2)(110))with the temperature programmed desorption technique.The results show a clear different tendency of the desorption of methyl groups adsorbed on bridge bonded oxygen(O_(b)),and CO molecules on the five coordinate Ti^(4+)sites(Ti_(5c))as the Ovconcentration changes,suggesting that the surface defects may have crucial influence on the absorption of species on different sites of R-TiO_(2)(110).
文摘The studies of NO chemisorption on TiO2(110) surface are the base of research to NO decomposed to N2O on TiO2 surface. In this paper, 12 kinds of possible models of NO adsorbed on TiO2 perfect and defect surface were calculated by use of ab initio cluster method. We carried out optimization of the geometry, calculation of the chemisorption energy and analysis of the Mulliken population to those adsorption models. According to the calculation results, it can be got that the adsorbed decomposition of NO on defect surface is more advantageous and M6 and M12 are the important models to NO chemisorption and decomposition on TiO2 surface.
