Type Ⅰ hot corrosion behavior of SiO_2-Al_2O_3-glass composite coating based on Ti-47 Al-2 Cr-2 Nb substrate was investigated in the mixture salt of 25 wt%NaCl + 75 wt%Na_2SO_4 at 850 °C. The results showed that...Type Ⅰ hot corrosion behavior of SiO_2-Al_2O_3-glass composite coating based on Ti-47 Al-2 Cr-2 Nb substrate was investigated in the mixture salt of 25 wt%NaCl + 75 wt%Na_2SO_4 at 850 °C. The results showed that there was a bidirectional ion exchange between composite coating and the film of mixed salts, and the sodium ion in the molten salts penetrated into the glass matrix of composite coating, while the potassium ion in the glass matrix dissolved into the molten salts. A decrease in hot corrosion rate was achieved for the coated alloy in comparison with the bared substrate due to the composite coating acting as a diffusion barrier to sulfur and chlorine and preventing the molten salts from diffusing to the coating/alloy interface during the hot corrosion exposure. Additionally, the composite coating decreased the oxygen partial pressure at the coating/alloy interface and promoted the selective oxidation of Al to form a protective Al_2O_3 layer.展开更多
Series Bi3NbO7/Bi2Zn（2/3）Nb（4/3）O7 （BN/BZN） composites were synthesized through a facile solid state reaction method. The products were characterized by X-ray diffraction（XRD）, field emission scanning electron...Series Bi3NbO7/Bi2Zn（2/3）Nb（4/3）O7 （BN/BZN） composites were synthesized through a facile solid state reaction method. The products were characterized by X-ray diffraction（XRD）, field emission scanning electron microscopy（FE-SEM） and UV-vis diffuse reflectance spectroscopy（DRS）. When BN： BZN=0.1 mole ratio, the BN/BZN composite showed the best visible-light-driven photocatalytic performance, which decomposed nearly 100% of Rh B（10 ppm, p H=3-4） within 40 min. The results demonstrated that in-situ solid state synthesis of BN/BZN composites could be an efficient strategy to develop new photocatalyst for environmental remediation.展开更多
Nano sized powders of TiO2 （titanium dioxide） and Nb2O5 （Niobium （V） oxide） were used to fabricate TiO2/Nb2O5 composites thin films by EPD （electrophoretic deposition） technique. The metal oxide powders, toget...Nano sized powders of TiO2 （titanium dioxide） and Nb2O5 （Niobium （V） oxide） were used to fabricate TiO2/Nb2O5 composites thin films by EPD （electrophoretic deposition） technique. The metal oxide powders, together with magnesium nitrate hexahydrate pellets, were suspended in propan-2-ol inside an EPD cell. The electrodes, placed 1.2 cm apart, were partially immersed in the suspension and a DC potential applied across them. Key EPD process parameters, which include applied DC electric field, deposition time and solid concentration in suspension, were optimized through visual inspection and from UV-Vis-NIR spectrophotometer spectra. The highest （55%） transmittance was obtained for films with deposition time of 90 s, powder concentration of 0.01 g/40 mL, and 35 V DC （direct current） voltage. XRD micrographs confirmed that TiO2 and Nb2O5 particles were presented in the composite film. SEM （scanning electron microscope） micrographs of the composite electrode thin films showed that porous films of high quality with well controlled morphology were deposited by using the EPD technique.展开更多
Measurements of hydrogen absorption desorption behavior of Nb Al alloys, Nb ss (Nb solid sloution), Nb ss +Nb 3Al, Nb 3Al, Nb 3Al+Nb 2Al, were carried out under hydrogen pressure from 0 to 3.4 MPa at 353 and 357 K, al...Measurements of hydrogen absorption desorption behavior of Nb Al alloys, Nb ss (Nb solid sloution), Nb ss +Nb 3Al, Nb 3Al, Nb 3Al+Nb 2Al, were carried out under hydrogen pressure from 0 to 3.4 MPa at 353 and 357 K, along with mircostructural observation and X ray diffraction analysis. It was found that single phase alloys of Nb ss and Nb 3Al are not pulverized regardless of a considerable amount of hydrogen absorption, while two phase alloys of Nb ss +Nb 3Al and Nb 3Al+Nb 2Al are readily pulverized. X ray diffraction analysis indicated that no hydride with crystal structure different from constituent phases is formed by hydrogen absorption, but lattice parameters of Nb ss and Nb 3Al are increased. Pulverization of Nb Cr alloys was investigated under a hydrogen atmosphere of 0.1 MPa in an arc melting chamber without exposure to air after arc melting. Similarly, hydrogen pulverization occurs only in two phase alloys consisting of Nb ss and NbCr 2. Based on the measured lattice parameters of Nb ss and Nb 3Al(NbCr 2) in the hydrogenated two phase alloys and the microstructural observations, a mechanism for hydrogen pulverization is discussed.展开更多
基金supported by the National Natural Science Foundation of China (Grant No. 51201171)the National High Technology Research and Development Program of China (863 Program, Grant No. 2012AA03A512)
文摘Type Ⅰ hot corrosion behavior of SiO_2-Al_2O_3-glass composite coating based on Ti-47 Al-2 Cr-2 Nb substrate was investigated in the mixture salt of 25 wt%NaCl + 75 wt%Na_2SO_4 at 850 °C. The results showed that there was a bidirectional ion exchange between composite coating and the film of mixed salts, and the sodium ion in the molten salts penetrated into the glass matrix of composite coating, while the potassium ion in the glass matrix dissolved into the molten salts. A decrease in hot corrosion rate was achieved for the coated alloy in comparison with the bared substrate due to the composite coating acting as a diffusion barrier to sulfur and chlorine and preventing the molten salts from diffusing to the coating/alloy interface during the hot corrosion exposure. Additionally, the composite coating decreased the oxygen partial pressure at the coating/alloy interface and promoted the selective oxidation of Al to form a protective Al_2O_3 layer.
基金Funded by the National Natural Science Foundation of China(No.51662005)the Guangxi Natural Science Foundation(No.2014GXNSFFA118004)
文摘Series Bi3NbO7/Bi2Zn（2/3）Nb（4/3）O7 （BN/BZN） composites were synthesized through a facile solid state reaction method. The products were characterized by X-ray diffraction（XRD）, field emission scanning electron microscopy（FE-SEM） and UV-vis diffuse reflectance spectroscopy（DRS）. When BN： BZN=0.1 mole ratio, the BN/BZN composite showed the best visible-light-driven photocatalytic performance, which decomposed nearly 100% of Rh B（10 ppm, p H=3-4） within 40 min. The results demonstrated that in-situ solid state synthesis of BN/BZN composites could be an efficient strategy to develop new photocatalyst for environmental remediation.
文摘Nano sized powders of TiO2 （titanium dioxide） and Nb2O5 （Niobium （V） oxide） were used to fabricate TiO2/Nb2O5 composites thin films by EPD （electrophoretic deposition） technique. The metal oxide powders, together with magnesium nitrate hexahydrate pellets, were suspended in propan-2-ol inside an EPD cell. The electrodes, placed 1.2 cm apart, were partially immersed in the suspension and a DC potential applied across them. Key EPD process parameters, which include applied DC electric field, deposition time and solid concentration in suspension, were optimized through visual inspection and from UV-Vis-NIR spectrophotometer spectra. The highest （55%） transmittance was obtained for films with deposition time of 90 s, powder concentration of 0.01 g/40 mL, and 35 V DC （direct current） voltage. XRD micrographs confirmed that TiO2 and Nb2O5 particles were presented in the composite film. SEM （scanning electron microscope） micrographs of the composite electrode thin films showed that porous films of high quality with well controlled morphology were deposited by using the EPD technique.
文摘Measurements of hydrogen absorption desorption behavior of Nb Al alloys, Nb ss (Nb solid sloution), Nb ss +Nb 3Al, Nb 3Al, Nb 3Al+Nb 2Al, were carried out under hydrogen pressure from 0 to 3.4 MPa at 353 and 357 K, along with mircostructural observation and X ray diffraction analysis. It was found that single phase alloys of Nb ss and Nb 3Al are not pulverized regardless of a considerable amount of hydrogen absorption, while two phase alloys of Nb ss +Nb 3Al and Nb 3Al+Nb 2Al are readily pulverized. X ray diffraction analysis indicated that no hydride with crystal structure different from constituent phases is formed by hydrogen absorption, but lattice parameters of Nb ss and Nb 3Al are increased. Pulverization of Nb Cr alloys was investigated under a hydrogen atmosphere of 0.1 MPa in an arc melting chamber without exposure to air after arc melting. Similarly, hydrogen pulverization occurs only in two phase alloys consisting of Nb ss and NbCr 2. Based on the measured lattice parameters of Nb ss and Nb 3Al(NbCr 2) in the hydrogenated two phase alloys and the microstructural observations, a mechanism for hydrogen pulverization is discussed.
