THE mechanical response and deformation mechanisms of pure nickel under nanoindentation were systematically investigated using molecular dynamics(MD)simulations,with a particular focus on the novel interplay between c...THE mechanical response and deformation mechanisms of pure nickel under nanoindentation were systematically investigated using molecular dynamics(MD)simulations,with a particular focus on the novel interplay between crystallographic orientation,grain boundary(GB)proximity,and pore characteristics(size/location).This study compares single-crystal nickel models along[100],[110],and[111]orientations with equiaxed polycrystalline models containing 0,1,and 2.5 nm pores in surface and subsurface configurations.Our results reveal that crystallographic anisotropy manifests as a 24.4%higher elastic modulus and 22.2%greater hardness in[111]-oriented single crystals compared to[100].Pore-GB synergistic effects are found to dominate the deformation behavior:2.5 nm subsurface pores reduce hardness by 25.2%through stress concentration and dislocation annihilation at GBs,whereas surface pores enable mechanical recovery via accelerated dislocation generation post-collapse.Additionally,size-dependent deformation regimes were identified,with 1 nm pores inducing negligible perturbation due to rapid atomic rearrangement,in contrast with persistent softening in 2.5 nm pores.These findings establish atomic-scale design principles for defect engineering in nickel-based aerospace components,demonstrating how crystallographic orientation,pore configuration,and GB interactions collectively govern nanoindentation behavior.展开更多
Eutectic high entropy alloys are noted for their excellent castability and comprehensive mechanical properties.The excellent mechanical properties are closely related to the activation and evolution of deformation mec...Eutectic high entropy alloys are noted for their excellent castability and comprehensive mechanical properties.The excellent mechanical properties are closely related to the activation and evolution of deformation mechanisms at the atomic scale.In this work,AlCoCrFeNi2.1 alloy is taken as the research object.The mechanical behaviors and deformation mechanisms of the FCC and B2 single crystals with different orientations and the FCC/B2 composites with K-S orientation relationship during nanoindentation processes are systematically studied by molecular dynamics simulations.The results show that the mechanical behaviors of FCC single crystals are significantly orientation-dependent,meanwhile,the indentation force of[110]single crystal is the lowest at the elastic-plastic transition point,and that for[100]single crystal is the lowest in plastic deformation stage.Compared with FCC,the stress for B2 single crystals at the elastic-plastic transition point is higher.However,more deformation systems such as stacking faults,twins and dislocation loops are activated in FCC single crystal during the plastic deformation process,resulting in higher indentation force.For composites,the flow stress increases with the increase of B2 phase thickness during the initial stage of deformation.When indenter penetrates heterogeneous interface,the significantly increased deformation system in FCC phase leads to a significant increase in indentation force.The mechanical behaviors and deformation mechanisms depend on the component single crystal.When the thickness of the component layer is less than 15 nm,the heterogeneous interfaces fail to prevent the dislocation slip and improve the indentation force.The results will enrich the plastic deformation mechanisms of multi-principal eutectic alloys and provide guidance for the design of nanocrystalline metallic materials.展开更多
The mechanical properties of minerals in planetary materials are not only interesting from a fundamental point of view but also critical to the development of future space missions.Here we present nanoindentation expe...The mechanical properties of minerals in planetary materials are not only interesting from a fundamental point of view but also critical to the development of future space missions.Here we present nanoindentation experiments to evaluate the hardness and reduced elastic modulus of olivine,(Mg,Fe)_(2)SiO_(4),in meteorite NWA 12008,a lunar basalt.Our experiments suggest that the olivine grains in this lunaite are softer and more elastic than their terrestrial counterparts.Also,we have performed synchrotron-based high-pressure X-ray diffraction(HP-XRD)measurements to probe the compressibility properties of olivine in this meteorite and,for comparison purposes,of three ordinary chondrites.The HP-XRD results suggest that the axial compressibility of the orthorhombic b lattice parameter of olivine relative to terrestrial olivine is higher in NWA 12008 and also in the highly-shocked Chelyabinsk meteorite.The origin of the observed differences is discussed.A simple model combining the results of both our nanoindentation and HP-XRD measurements allows us to describe the contribution of macroscopic and chemical-bond related effects,both of which are necessary to reproduce the observed elastic modulus softening.Such joint analysis of the mechanical and elastic properties of meteorites and returned samples opens up a new avenue for characterizing these highly interesting materials.展开更多
Geomechanical properties of rocks vary across different measurement scales,primarily due to heterogeneity.Micro-scale geomechanical tests,including micro-scale“scratch tests”and nano-scale nanoindentation tests,are ...Geomechanical properties of rocks vary across different measurement scales,primarily due to heterogeneity.Micro-scale geomechanical tests,including micro-scale“scratch tests”and nano-scale nanoindentation tests,are attractive at different scales.Each method requires minimal sample volume,is low cost,and includes a relatively rapid measurement turnaround time.However,recent micro-scale test results–including scratch test results and nanoindentation results–exhibit tangible variance and uncertainty,suggesting a need to correlate mineral composition mapping to elastic modulus mapping to isolate the relative impact of specific minerals.Different research labs often utilize different interpretation methods,and it is clear that future micro-mechanical tests may benefit from standardized testing and interpretation procedures.The objectives of this study are to seek options for standardized testing and interpretation procedures,through two specific objectives:(1)Quantify chemical and physical controls on micro-mechanical properties and(2)Quantify the source of uncertainties associated with nanoindentation measurements.To reach these goals,we conducted mechanical tests on three different scales:triaxial compression tests,scratch tests,and nanoindentation tests.We found that mineral phase weight percentage is highly correlated with nanoindentation elastic modulus distribution.Finally,we conclude that nanoindentation testing is a mineralogy and microstructure-based method and generally yields significant uncertainty and overestimation.The uncertainty of the testing method is largely associated with not mapping pore space a priori.Lastly,the uncertainty can be reduced by combining phase mapping and modulus mapping with substantial and random data sampling.展开更多
The effects of potassium(K)doping on the incipient plasticity of tungsten(W)under nanoindentation were investigated using a combination of experiments and mesoscale defects dynamic simulations.The transmission electro...The effects of potassium(K)doping on the incipient plasticity of tungsten(W)under nanoindentation were investigated using a combination of experiments and mesoscale defects dynamic simulations.The transmission electron microscopy study reveal that nanometer-sized bubbles were formed through the vaporization of K in specimens prepared by spark plasma sintering.In order to investigate the mechanical properties of the K-doped W specimens,nano-characterization experiments and defect dynamics simula-tions were conducted,comparing with those in pure W.Nanoindentation tests reveal that the maximum shear yield stress approaches the theoretical strength in annealed pure W,while K-doped W samples exhibit significant yield drop accompanied with stochastic variations.A newly developed mesoscale defect dynamics model to concurrently couple dislocation dynamics with finite element method has been also employed to investigate micro-mechanisms of plasticity under nanoindentation and the effects of K-bubbles on the plastic deformation.The simulations revealed that the localized stress concentration induced by the K-bubbles promoted dislocation nucleation and enhanced plastic deformation,thereby reducing the yield stress,showing good agreement with the experiment.展开更多
The unveiling of temperature effects on the deformation behaviors of wrought magnesium(Mg)alloys is beneficial for optimizing the hot forming parameters of these alloys with limited room temperature(RT)formability.In ...The unveiling of temperature effects on the deformation behaviors of wrought magnesium(Mg)alloys is beneficial for optimizing the hot forming parameters of these alloys with limited room temperature(RT)formability.In the present work,we performed nanoindentations on individual grains of textured wrought AZ31 alloy along the normal direction(ND)from RT to 300℃to investigate the intrinsic non-basal dislocation behaviors at various temperatures.Interestingly,we observed abnormally enhanced nanoindentation displacement bursts(pop-ins)at elevated temperatures ranging from 150 to 250℃,which is beyond the general scenario that higher temperatures typically result in smoother plastic flow.The bursts exhibited Gaussian-like statistics,which differ from the well-reported bursts with power-law size distributions resulting from the destruction of jammed dislocation configurations.Through transmission electron microscopy(TEM)examination of the microstructure beneath the indentation just after the burst,we found that the abnormal displacement bursts originated from the heterogeneous nucleation of prismatic screw(a)dislocations due to the exhaustion of dislocation sources within the specified temperature range.展开更多
The successful development of shale oil and gas reservoirs is the biggest technological revolution in the oil and gas industry.Its key technologies are horizontal well drilling and fracturing,which are based on unders...The successful development of shale oil and gas reservoirs is the biggest technological revolution in the oil and gas industry.Its key technologies are horizontal well drilling and fracturing,which are based on understanding the mechanical properties of reservoir rocks.Therefore,it is critical to obtain the reservoir mechanical parameters quickly,efficiently,and inexpensively.In this study,shale samples were collected from three basins in Southwest China,and the elastic modulus of shale in the indentation depth range of 0-5000 nm was obtained by nanoindentation experiments.Experimental results showed that different indentation depths had different physical characteristics.The shallower depths had the mechanical properties of single minerals,while the deeper depths had the mechanical properties of a multi-mineral composite.The difference between the two represented the cementation strength between the mineral particles.The error between the calculation results of the existing equivalent medium theoretical model and experimental data reached 324%.In this study,a weak cementation model was adopted,and three parameters obtained by nanoindentation experiments were considered:the soft component volume content,intergranular cementation strength,and mineral particle size.This solved the problem of assuming rather than calculating the values of some parameters in the existing model and realized the prediction of the macroscopic mechanical parameters of shale.The calculation error was reduced to less than 20%,and the test method and calculation model can be popularized and applied in engineering.展开更多
The nanoindentation pop-in behaviors of 13 grains with diverse crystallographic orientations were analysed using a coarse-grained Mg-2 wt.% Gd alloy.Within nanoscale stressed volumes within all grains,the converted sh...The nanoindentation pop-in behaviors of 13 grains with diverse crystallographic orientations were analysed using a coarse-grained Mg-2 wt.% Gd alloy.Within nanoscale stressed volumes within all grains,the converted shear stresses for the first pop-in,calculated using the indentation Schmid factor,ranged from 1 to 1.3 GPa,consistent with theoretical predictions for dislocation nucleation in Mg.The estimated activation volume of the first pop-in was approximately 27–40 A3(involving about ~2 atoms),aligning with reported atomistic simulations of the surface dislocation semi-loop nucleation.While indented near the -axis,grains exhibit higher first pop-in loads and successive pop-ins,implying the possibility of a cross-slip nucleation mechanism to accommodate -axis deformation.展开更多
T-carbon is a new allotrope of carbon materials,and it displays high hardness and low density.Nevertheless,the hardening mechanisms of T-carbon thin films under nanoindentation remain elusive.This work utilizes molecu...T-carbon is a new allotrope of carbon materials,and it displays high hardness and low density.Nevertheless,the hardening mechanisms of T-carbon thin films under nanoindentation remain elusive.This work utilizes molecular dynamics simulation to explore the hardening mechanisms of T-carbon thin films under nanoindentation with variations of loading velocities and temperatures.The results reveal that a loading velocity increase at a given temperature raises the nanoindentation force.The increase in nanoindentation force is due to graphitization,which is related to the fracture of tetrahedral structures in T-carbon thin films.However,increased graphitization caused by an increased temperature lowers the nanoindentation force at a given loading velocity.The increased graphitization is influenced by both the fractured tetrahedrons and the deformation of inter-tetrahedron bond angles.This is attributed to the loss of thermal stability and the lower density of T-carbon thin films as the temperature increases.These findings have significant implications for the design of nanodevices for specific application requirements.展开更多
Microstructural heterogeneity of low-permeability sandstone roofs of deep unmineable coal seams due to diagenesis significantly affects rock mechanical behavior,greatly impacting the sealing potential of in situ CO_(2...Microstructural heterogeneity of low-permeability sandstone roofs of deep unmineable coal seams due to diagenesis significantly affects rock mechanical behavior,greatly impacting the sealing potential of in situ CO_(2) sequestration and the structural stability of the geological formation.However,little is known about how the microstructure of different mineral groups influences the multiscale mechanical behavior of deep sandstone.This study proposes a new method for quantitatively characterizing the multiscale mechanical properties of low-permeability sandstone and shows the mechanisms responsible for mechanical failure at the micro-,meso-,and macroscale.Triaxial compression tests and targeted nanoindentation tests were conducted to assess the micro-and macroscale mechanical properties of different types of sandstone.The micro-and macroscale experiments were coupled with numerical simulations of compression using a unified cohesive model based on Voronoi polygons to clarify the multiscale mechanical behavior.The results indicate that quartz,the primary mineral component of the sandstones examined,exhibits the strongest micromechanical properties,followed by feldspar,calcite,and clay minerals.Compared to polycrystalline quartz,monocrystalline quartz has a more stable microstructure and is mechanically stronger.The macro-mechanical properties of tight sandstone samples are weakened by increased microstructural inhomogeneity and larger grain size.This leads to a higher likelihood of splitting damage,characterized by a high degree of discrete and weak stress sensitivity.The major conclusion is that the positive rhythm lithofacies of medium-grained sandstone to siltstone are the most favorable for efficient CO_(2) sequestration in deep unmineable coal seams.展开更多
The Mechanical properties of the hexagonal tungsten nanowhiskers, which were synthesized by chemical vapor deposition, were characterized by instrumented nanoindentation and atomic force microscope （AFM）. The nanoin...The Mechanical properties of the hexagonal tungsten nanowhiskers, which were synthesized by chemical vapor deposition, were characterized by instrumented nanoindentation and atomic force microscope （AFM）. The nanoindentation results show that tungsten nanowhiskers exhibit a hardness of （6.2±1.7） GPa and an elastic modulus of （225±20） GPa. According to the comparative test results, the tungsten nanowhiskers possess a comparable hardness to tungsten microwhiskers, and an hardness increase of 35% to the bulk single-crystal tungsten. The increase in the hardness of whiskers is attributed to the lacking of dislocation avalanche observed in the bulk single-crystal tungsten. The measured modulus is about 80% that of the tungsten microwhiskers, which can be contributed to the size effects of the nanowhiskers and the substrate effects in the nanoindentation test.展开更多
In order to investigate the material properties ofperiodontal ligament （ PDL） in different locations, the nanoindentation method is used to survey the elastic modulus of the PDL at different levels. Cadaveric specim...In order to investigate the material properties ofperiodontal ligament （ PDL） in different locations, the nanoindentation method is used to survey the elastic modulus of the PDL at different levels. Cadaveric specimens of human mandibular canine were obtained from 4 adult donors, 16 transverse specimens were made from the sections of cervical margin, midroot and apex using the slow cutting machine. The prepared specimens were tested in different sections （along the longitudinal direction） and different areas （in the circumferential direction）. According to the Oliver-Phair theory, the mean values of elastic modulus were calculated foreach area and the differences among them were compared. In the midroot section, the average elastic modulus is ranging from 0. 11 to 0. 23 MPa, the changing range of the cervical margin and apex are from 0. 21 to 0. 53 MPa and 0. 44 to0.62 MPa, respectively. Experimental results indicate that the average elastic modulus in the midroot is lower than that in the cervical margin and apex, and relatively small changes occur among them. However, there is a large change to the elastic modulus value in the cicumferential direction for the PDL.展开更多
Irradiating hard rocks by a high-power laser can reduce localized hardness in the rocks;however,continuous lasers produce a large amount of melt that inhibits further heat absorption.Pulsed lasers allow rocks to absor...Irradiating hard rocks by a high-power laser can reduce localized hardness in the rocks;however,continuous lasers produce a large amount of melt that inhibits further heat absorption.Pulsed lasers allow rocks to absorb and dissipate energy and avoid melt formation.In this study,200 W nanosecond pulsed laser was used to irradiate granite.The effects of laser parameters on the thermal cracking morphology,temperature field,warming pattern,and Leeb hardness of the granite surface were analyzed.The optimal laser parameters for softening granite were determined by performing objective optimization in MATLAB using granite's melting point as the reference.Nanoindentation techniques were employed to assess the softening characteristics of the granite surface along the longitudinal direction.The results showed that three main forms of thermal damage occurred on the granite surface:oxidative decomposition,spalling,and melting.The damage state was affected by the average laser power,with the pulse width and repetition frequency affecting surface damage differently.Appropriate laser parameters effectively controlled the melt damage on the granite surface,and irradiation with nanosecond pulsed lasers effectively reduced surface hardness.However,excessive power can generate large amounts of hard melts and weaken the softening effect.展开更多
In coal mining industry,with the depth growing of coal mines,the creep behaviours of coal and rock can extensively affect the mining safety,coalbed methane recovery and geo-sequestration.To acquire a better insight in...In coal mining industry,with the depth growing of coal mines,the creep behaviours of coal and rock can extensively affect the mining safety,coalbed methane recovery and geo-sequestration.To acquire a better insight into their creep characteristics,an efficient and robust researching technique,nanoindentation,was applied to investigate the creep performances of coal and rock samples obtained from two coal mines in the east of China.Creep characteristics were reflected by evaluating the curves of creep depth versus creep time of nanoindentation tests during the load-holding period at the peak load of 30 mN.These curves can be divided into two stages:transient stage and steady stage;and the time of load-holding period of 5 s,which is the dividing point between two stages,can efficiently avoid the influence of creep displacement on the unloading curves.The exponential function can perfectly fit creep curves and Kelvin model can be used to calculate the rheological parameters of coal and rock samples.Calculated results yield values for the creep modulus and viscosity terms of coal and rock.This study also settled a particular emphasis on the selection of the positions of indentations to obtain the rheological properties of mineralogical constituents in heterogonous coal and rock samples and their elastic aftereffect.展开更多
基金The National Natural Science Foundation of China(Grant No.12462006)Beijing Institute of Structure and Environment Engineering Joint Innovation Fund(No.BQJJ202414).
文摘THE mechanical response and deformation mechanisms of pure nickel under nanoindentation were systematically investigated using molecular dynamics(MD)simulations,with a particular focus on the novel interplay between crystallographic orientation,grain boundary(GB)proximity,and pore characteristics(size/location).This study compares single-crystal nickel models along[100],[110],and[111]orientations with equiaxed polycrystalline models containing 0,1,and 2.5 nm pores in surface and subsurface configurations.Our results reveal that crystallographic anisotropy manifests as a 24.4%higher elastic modulus and 22.2%greater hardness in[111]-oriented single crystals compared to[100].Pore-GB synergistic effects are found to dominate the deformation behavior:2.5 nm subsurface pores reduce hardness by 25.2%through stress concentration and dislocation annihilation at GBs,whereas surface pores enable mechanical recovery via accelerated dislocation generation post-collapse.Additionally,size-dependent deformation regimes were identified,with 1 nm pores inducing negligible perturbation due to rapid atomic rearrangement,in contrast with persistent softening in 2.5 nm pores.These findings establish atomic-scale design principles for defect engineering in nickel-based aerospace components,demonstrating how crystallographic orientation,pore configuration,and GB interactions collectively govern nanoindentation behavior.
基金supported by the Natural Science Foundation of Hebei Province(E2024209052)the Youth Scholars Promotion Plan of North China University of Science and Technology(QNTJ202307).
文摘Eutectic high entropy alloys are noted for their excellent castability and comprehensive mechanical properties.The excellent mechanical properties are closely related to the activation and evolution of deformation mechanisms at the atomic scale.In this work,AlCoCrFeNi2.1 alloy is taken as the research object.The mechanical behaviors and deformation mechanisms of the FCC and B2 single crystals with different orientations and the FCC/B2 composites with K-S orientation relationship during nanoindentation processes are systematically studied by molecular dynamics simulations.The results show that the mechanical behaviors of FCC single crystals are significantly orientation-dependent,meanwhile,the indentation force of[110]single crystal is the lowest at the elastic-plastic transition point,and that for[100]single crystal is the lowest in plastic deformation stage.Compared with FCC,the stress for B2 single crystals at the elastic-plastic transition point is higher.However,more deformation systems such as stacking faults,twins and dislocation loops are activated in FCC single crystal during the plastic deformation process,resulting in higher indentation force.For composites,the flow stress increases with the increase of B2 phase thickness during the initial stage of deformation.When indenter penetrates heterogeneous interface,the significantly increased deformation system in FCC phase leads to a significant increase in indentation force.The mechanical behaviors and deformation mechanisms depend on the component single crystal.When the thickness of the component layer is less than 15 nm,the heterogeneous interfaces fail to prevent the dislocation slip and improve the indentation force.The results will enrich the plastic deformation mechanisms of multi-principal eutectic alloys and provide guidance for the design of nanocrystalline metallic materials.
基金Financial support from the project PID2021-128062NB-I00 funded by the Spanish Ministerio de Ciencia,Innovación y Universidades MCIU(doi:10.13039/501100011033)is acknowledged,as well as the Spanish program Unidad de Excelencia María de Maeztu CEX2020-001058-M.The ALBA-CELLS synchrotron is acknowledged for granting beamtime at the MSPD beamline under projects 2021095390 and 2022025734.PG-T acknowledges the financial support from the Spanish MCIU through the FPI predoctoral fellowship PRE2022-104624.JS acknowledges the financial support from projects 2021-SGR-00651 and PID2020-116844RB-C21.EP-A acknowledges financial support from the LUMIO project funded by the Agenzia Spaziale Italiana(2024-6-HH.0).DE thanks the financial support from Spanish MCIU under projects PID2022-138076NB-C41 and RED2022-134388-T from Generalitat Valenciana(GVA)through grants CIPROM/2021/075 and MFA/2022/007,which are part of the Advanced Materials program and is supported with funding from the European Union Next Generation EU(PRTR-C17.I1).RT and DE(PB and DE)thank GVA for the Postdoctoral Fellowship CIAPOS/2021/20(CIAPOS/2023/406).JS-M thanks the Spanish MCIU for the PRE2020-092198 fellowship.NWA 12008 has been studied within the framework of an international European consortium led by IFP.Special acknowledge to I.Weber for providing the NWA 12008 meteorite thin section.This work is part of the doctoral thesis of PG-T(Doctoral Program in Physics at Universitat Autònoma de Barcelona).
文摘The mechanical properties of minerals in planetary materials are not only interesting from a fundamental point of view but also critical to the development of future space missions.Here we present nanoindentation experiments to evaluate the hardness and reduced elastic modulus of olivine,(Mg,Fe)_(2)SiO_(4),in meteorite NWA 12008,a lunar basalt.Our experiments suggest that the olivine grains in this lunaite are softer and more elastic than their terrestrial counterparts.Also,we have performed synchrotron-based high-pressure X-ray diffraction(HP-XRD)measurements to probe the compressibility properties of olivine in this meteorite and,for comparison purposes,of three ordinary chondrites.The HP-XRD results suggest that the axial compressibility of the orthorhombic b lattice parameter of olivine relative to terrestrial olivine is higher in NWA 12008 and also in the highly-shocked Chelyabinsk meteorite.The origin of the observed differences is discussed.A simple model combining the results of both our nanoindentation and HP-XRD measurements allows us to describe the contribution of macroscopic and chemical-bond related effects,both of which are necessary to reproduce the observed elastic modulus softening.Such joint analysis of the mechanical and elastic properties of meteorites and returned samples opens up a new avenue for characterizing these highly interesting materials.
基金support of this project through the Southwest Regional Partnership on Carbon Sequestration(Grant No.DE-FC26-05NT42591)Improving Production in the Emerging Paradox Oil Play(Grant No.DE-FE0031775).
文摘Geomechanical properties of rocks vary across different measurement scales,primarily due to heterogeneity.Micro-scale geomechanical tests,including micro-scale“scratch tests”and nano-scale nanoindentation tests,are attractive at different scales.Each method requires minimal sample volume,is low cost,and includes a relatively rapid measurement turnaround time.However,recent micro-scale test results–including scratch test results and nanoindentation results–exhibit tangible variance and uncertainty,suggesting a need to correlate mineral composition mapping to elastic modulus mapping to isolate the relative impact of specific minerals.Different research labs often utilize different interpretation methods,and it is clear that future micro-mechanical tests may benefit from standardized testing and interpretation procedures.The objectives of this study are to seek options for standardized testing and interpretation procedures,through two specific objectives:(1)Quantify chemical and physical controls on micro-mechanical properties and(2)Quantify the source of uncertainties associated with nanoindentation measurements.To reach these goals,we conducted mechanical tests on three different scales:triaxial compression tests,scratch tests,and nanoindentation tests.We found that mineral phase weight percentage is highly correlated with nanoindentation elastic modulus distribution.Finally,we conclude that nanoindentation testing is a mineralogy and microstructure-based method and generally yields significant uncertainty and overestimation.The uncertainty of the testing method is largely associated with not mapping pore space a priori.Lastly,the uncertainty can be reduced by combining phase mapping and modulus mapping with substantial and random data sampling.
基金supported by the Nano&Material Technology Development Program through the National Research Foundation of Korea(NRF)funded by Ministry of Science and ICT(No.RS-2024-00445448)the National Research Foundation of Korea(NRF)funded by the Ministry of Science(No.NRF-2021R1A2C3005096)the ITER Technology R&D Program.
文摘The effects of potassium(K)doping on the incipient plasticity of tungsten(W)under nanoindentation were investigated using a combination of experiments and mesoscale defects dynamic simulations.The transmission electron microscopy study reveal that nanometer-sized bubbles were formed through the vaporization of K in specimens prepared by spark plasma sintering.In order to investigate the mechanical properties of the K-doped W specimens,nano-characterization experiments and defect dynamics simula-tions were conducted,comparing with those in pure W.Nanoindentation tests reveal that the maximum shear yield stress approaches the theoretical strength in annealed pure W,while K-doped W samples exhibit significant yield drop accompanied with stochastic variations.A newly developed mesoscale defect dynamics model to concurrently couple dislocation dynamics with finite element method has been also employed to investigate micro-mechanisms of plasticity under nanoindentation and the effects of K-bubbles on the plastic deformation.The simulations revealed that the localized stress concentration induced by the K-bubbles promoted dislocation nucleation and enhanced plastic deformation,thereby reducing the yield stress,showing good agreement with the experiment.
基金supported by the Natural Science Foundation of China(Nos.52031011 and 51971167).
文摘The unveiling of temperature effects on the deformation behaviors of wrought magnesium(Mg)alloys is beneficial for optimizing the hot forming parameters of these alloys with limited room temperature(RT)formability.In the present work,we performed nanoindentations on individual grains of textured wrought AZ31 alloy along the normal direction(ND)from RT to 300℃to investigate the intrinsic non-basal dislocation behaviors at various temperatures.Interestingly,we observed abnormally enhanced nanoindentation displacement bursts(pop-ins)at elevated temperatures ranging from 150 to 250℃,which is beyond the general scenario that higher temperatures typically result in smoother plastic flow.The bursts exhibited Gaussian-like statistics,which differ from the well-reported bursts with power-law size distributions resulting from the destruction of jammed dislocation configurations.Through transmission electron microscopy(TEM)examination of the microstructure beneath the indentation just after the burst,we found that the abnormal displacement bursts originated from the heterogeneous nucleation of prismatic screw(a)dislocations due to the exhaustion of dislocation sources within the specified temperature range.
基金supported by the Key R&D Program Project of Xinjiang Province(2024B01013)the National Key Research and Development Program of China(2022YFE0129800).
文摘The successful development of shale oil and gas reservoirs is the biggest technological revolution in the oil and gas industry.Its key technologies are horizontal well drilling and fracturing,which are based on understanding the mechanical properties of reservoir rocks.Therefore,it is critical to obtain the reservoir mechanical parameters quickly,efficiently,and inexpensively.In this study,shale samples were collected from three basins in Southwest China,and the elastic modulus of shale in the indentation depth range of 0-5000 nm was obtained by nanoindentation experiments.Experimental results showed that different indentation depths had different physical characteristics.The shallower depths had the mechanical properties of single minerals,while the deeper depths had the mechanical properties of a multi-mineral composite.The difference between the two represented the cementation strength between the mineral particles.The error between the calculation results of the existing equivalent medium theoretical model and experimental data reached 324%.In this study,a weak cementation model was adopted,and three parameters obtained by nanoindentation experiments were considered:the soft component volume content,intergranular cementation strength,and mineral particle size.This solved the problem of assuming rather than calculating the values of some parameters in the existing model and realized the prediction of the macroscopic mechanical parameters of shale.The calculation error was reduced to less than 20%,and the test method and calculation model can be popularized and applied in engineering.
基金financial support of NSERC Discovery Grant (RGPIN-2019–05882) and Canada Research Chair program (CRC-2021–00512)。
文摘The nanoindentation pop-in behaviors of 13 grains with diverse crystallographic orientations were analysed using a coarse-grained Mg-2 wt.% Gd alloy.Within nanoscale stressed volumes within all grains,the converted shear stresses for the first pop-in,calculated using the indentation Schmid factor,ranged from 1 to 1.3 GPa,consistent with theoretical predictions for dislocation nucleation in Mg.The estimated activation volume of the first pop-in was approximately 27–40 A3(involving about ~2 atoms),aligning with reported atomistic simulations of the surface dislocation semi-loop nucleation.While indented near the -axis,grains exhibit higher first pop-in loads and successive pop-ins,implying the possibility of a cross-slip nucleation mechanism to accommodate -axis deformation.
文摘T-carbon is a new allotrope of carbon materials,and it displays high hardness and low density.Nevertheless,the hardening mechanisms of T-carbon thin films under nanoindentation remain elusive.This work utilizes molecular dynamics simulation to explore the hardening mechanisms of T-carbon thin films under nanoindentation with variations of loading velocities and temperatures.The results reveal that a loading velocity increase at a given temperature raises the nanoindentation force.The increase in nanoindentation force is due to graphitization,which is related to the fracture of tetrahedral structures in T-carbon thin films.However,increased graphitization caused by an increased temperature lowers the nanoindentation force at a given loading velocity.The increased graphitization is influenced by both the fractured tetrahedrons and the deformation of inter-tetrahedron bond angles.This is attributed to the loss of thermal stability and the lower density of T-carbon thin films as the temperature increases.These findings have significant implications for the design of nanodevices for specific application requirements.
基金supported by the project from the Exploration and Development Research Institute of PetroChina Daqing Oilfield Companyfinancial support from the research by the National Natural Science Foundation of China(42402148)+1 种基金Sichuan Provincial Fund(24NSFSC4997)Guizhou Outstanding Young Science and Technology Talent Program(YQK[2023]012).
文摘Microstructural heterogeneity of low-permeability sandstone roofs of deep unmineable coal seams due to diagenesis significantly affects rock mechanical behavior,greatly impacting the sealing potential of in situ CO_(2) sequestration and the structural stability of the geological formation.However,little is known about how the microstructure of different mineral groups influences the multiscale mechanical behavior of deep sandstone.This study proposes a new method for quantitatively characterizing the multiscale mechanical properties of low-permeability sandstone and shows the mechanisms responsible for mechanical failure at the micro-,meso-,and macroscale.Triaxial compression tests and targeted nanoindentation tests were conducted to assess the micro-and macroscale mechanical properties of different types of sandstone.The micro-and macroscale experiments were coupled with numerical simulations of compression using a unified cohesive model based on Voronoi polygons to clarify the multiscale mechanical behavior.The results indicate that quartz,the primary mineral component of the sandstones examined,exhibits the strongest micromechanical properties,followed by feldspar,calcite,and clay minerals.Compared to polycrystalline quartz,monocrystalline quartz has a more stable microstructure and is mechanically stronger.The macro-mechanical properties of tight sandstone samples are weakened by increased microstructural inhomogeneity and larger grain size.This leads to a higher likelihood of splitting damage,characterized by a high degree of discrete and weak stress sensitivity.The major conclusion is that the positive rhythm lithofacies of medium-grained sandstone to siltstone are the most favorable for efficient CO_(2) sequestration in deep unmineable coal seams.
基金Projects(50804057,51074188) supported by the National Natural Science Foundation of ChinaProject(08C580) supported by the Scientific Research Fund of Hunan Provincial Education Department,ChinaProjects(2012T50703,2011M500128) supported by China Postdoctoral Science Foundation Funded Project and Postdoctoral Science Foundation of Central South University,China
文摘The Mechanical properties of the hexagonal tungsten nanowhiskers, which were synthesized by chemical vapor deposition, were characterized by instrumented nanoindentation and atomic force microscope （AFM）. The nanoindentation results show that tungsten nanowhiskers exhibit a hardness of （6.2±1.7） GPa and an elastic modulus of （225±20） GPa. According to the comparative test results, the tungsten nanowhiskers possess a comparable hardness to tungsten microwhiskers, and an hardness increase of 35% to the bulk single-crystal tungsten. The increase in the hardness of whiskers is attributed to the lacking of dislocation avalanche observed in the bulk single-crystal tungsten. The measured modulus is about 80% that of the tungsten microwhiskers, which can be contributed to the size effects of the nanowhiskers and the substrate effects in the nanoindentation test.
基金The National Natural Science Foundation of Chin(No.51305208)
文摘In order to investigate the material properties ofperiodontal ligament （ PDL） in different locations, the nanoindentation method is used to survey the elastic modulus of the PDL at different levels. Cadaveric specimens of human mandibular canine were obtained from 4 adult donors, 16 transverse specimens were made from the sections of cervical margin, midroot and apex using the slow cutting machine. The prepared specimens were tested in different sections （along the longitudinal direction） and different areas （in the circumferential direction）. According to the Oliver-Phair theory, the mean values of elastic modulus were calculated foreach area and the differences among them were compared. In the midroot section, the average elastic modulus is ranging from 0. 11 to 0. 23 MPa, the changing range of the cervical margin and apex are from 0. 21 to 0. 53 MPa and 0. 44 to0.62 MPa, respectively. Experimental results indicate that the average elastic modulus in the midroot is lower than that in the cervical margin and apex, and relatively small changes occur among them. However, there is a large change to the elastic modulus value in the cicumferential direction for the PDL.
基金Project(52378425)supported by the National Natural Science Foundation of ChinaProject(1053320221044)supported by the Fundamental Research Funds for the Central Universities,China。
文摘Irradiating hard rocks by a high-power laser can reduce localized hardness in the rocks;however,continuous lasers produce a large amount of melt that inhibits further heat absorption.Pulsed lasers allow rocks to absorb and dissipate energy and avoid melt formation.In this study,200 W nanosecond pulsed laser was used to irradiate granite.The effects of laser parameters on the thermal cracking morphology,temperature field,warming pattern,and Leeb hardness of the granite surface were analyzed.The optimal laser parameters for softening granite were determined by performing objective optimization in MATLAB using granite's melting point as the reference.Nanoindentation techniques were employed to assess the softening characteristics of the granite surface along the longitudinal direction.The results showed that three main forms of thermal damage occurred on the granite surface:oxidative decomposition,spalling,and melting.The damage state was affected by the average laser power,with the pulse width and repetition frequency affecting surface damage differently.Appropriate laser parameters effectively controlled the melt damage on the granite surface,and irradiation with nanosecond pulsed lasers effectively reduced surface hardness.However,excessive power can generate large amounts of hard melts and weaken the softening effect.
基金the projects of the Fundamental Research Funds for the Central Universities(2020ZDPY0221)the Guizhou Science and Technology Department([2020]2Y026)。
文摘In coal mining industry,with the depth growing of coal mines,the creep behaviours of coal and rock can extensively affect the mining safety,coalbed methane recovery and geo-sequestration.To acquire a better insight into their creep characteristics,an efficient and robust researching technique,nanoindentation,was applied to investigate the creep performances of coal and rock samples obtained from two coal mines in the east of China.Creep characteristics were reflected by evaluating the curves of creep depth versus creep time of nanoindentation tests during the load-holding period at the peak load of 30 mN.These curves can be divided into two stages:transient stage and steady stage;and the time of load-holding period of 5 s,which is the dividing point between two stages,can efficiently avoid the influence of creep displacement on the unloading curves.The exponential function can perfectly fit creep curves and Kelvin model can be used to calculate the rheological parameters of coal and rock samples.Calculated results yield values for the creep modulus and viscosity terms of coal and rock.This study also settled a particular emphasis on the selection of the positions of indentations to obtain the rheological properties of mineralogical constituents in heterogonous coal and rock samples and their elastic aftereffect.
