This study numerically examines the heat and mass transfer characteristics of two ternary nanofluids via converging and diverg-ing channels.Furthermore,the study aims to assess two ternary nanofluids combinations to d...This study numerically examines the heat and mass transfer characteristics of two ternary nanofluids via converging and diverg-ing channels.Furthermore,the study aims to assess two ternary nanofluids combinations to determine which configuration can provide better heat and mass transfer and lower entropy production,while ensuring cost efficiency.This work bridges the gap be-tween academic research and industrial feasibility by incorporating cost analysis,entropy generation,and thermal efficiency.To compare the velocity,temperature,and concentration profiles,we examine two ternary nanofluids,i.e.,TiO_(2)+SiO_(2)+Al_(2)O_(3)/H_(2)O and TiO_(2)+SiO_(2)+Cu/H_(2)O,while considering the shape of nanoparticles.The velocity slip and Soret/Dufour effects are taken into consideration.Furthermore,regression analysis for Nusselt and Sherwood numbers of the model is carried out.The Runge-Kutta fourth-order method with shooting technique is employed to acquire the numerical solution of the governed system of ordinary differential equations.The flow pattern attributes of ternary nanofluids are meticulously examined and simulated with the fluc-tuation of flow-dominating parameters.Additionally,the influence of these parameters is demonstrated in the flow,temperature,and concentration fields.For variation in Eckert and Dufour numbers,TiO_(2)+SiO_(2)+Al_(2)O_(3)/H_(2)O has a higher temperature than TiO_(2)+SiO_(2)+Cu/H_(2)O.The results obtained indicate that the ternary nanofluid TiO_(2)+SiO_(2)+Al_(2)O_(3)/H_(2)O has a higher heat transfer rate,lesser entropy generation,greater mass transfer rate,and lower cost than that of TiO_(2)+SiO_(2)+Cu/H_(2)O ternary nanofluid.展开更多
This study delves into both experimental and analytical examinations of heat exchange in a straight channel, where Al_(2)O_(3)-water nanofluids are utilized, spanning the Reynolds number spectrum from 100 to 1800. Div...This study delves into both experimental and analytical examinations of heat exchange in a straight channel, where Al_(2)O_(3)-water nanofluids are utilized, spanning the Reynolds number spectrum from 100 to 1800. Diverse volume fractions(1%, 2%, and 3%) of Al_(2)O_(3)-water nanofluids are meticulously prepared and analyzed. The essential physical properties of these nanofluids, critical for evaluating their thermal and flow characteristics, have been comprehensively assessed. From a quantitative perspective, numerical simulations are employed to predict the Nusselt number(Nu) and friction factor(f). The empirical findings reveal intriguing trends: the friction factor experiences an upward trend with diminishing velocity, attributed to heightened molecular cohesion. Conversely, the friction factor demonstrates a decline with diminishing volume fractions, a consequence of reduced particle size. Both the nanofluid's viscosity and heat transfer coefficient exhibit a rise in tandem with augmented volume flow rate and concentration gradient. Notably, the simulation results harmonize remarkably well with experimental data. Rigorous validation against prior studies underscores the robust consistency of these outcomes. In the pursuit of augmenting heat transfer, a volume fraction of 3% emerges as particularly influential, yielding an impressive 53.8% enhancement. Minor increments in the friction factor, while present, prove negligible and can be safely overlooked.展开更多
High-efficiency solar energy systems are characterized by their designs,which primarily rely on effective concentration and conversion methods of solar radiation.Evaluation of the performance enhancement of flat plate...High-efficiency solar energy systems are characterized by their designs,which primarily rely on effective concentration and conversion methods of solar radiation.Evaluation of the performance enhancement of flat plate solar collectors by integration with thermal energy storage could be achieved through simulation of proposed designs.The work aims to analyze a new solar collector integrated with a porous medium and shell and coiled tube heat exchanger.The heat transfer enhancement was investigated by varying the geometrical parameters in shell and helically coiled tubes operating with CuFe_(2)O_(4)/water with different volume fractions of 0.02%,0.05%,and 0.1 vol.%.This study presents an experimental and numerical investigation of the performance of the flat plate solar collector integrated with a helical coil heat exchanger using nanofluids.The solar collector has a dimension of 180 cm×80 cm and works with close-loop systems operated by the thermo siphon method.Two types of helical coil heat exchangers,Coil-A and Coil-B have been investigated.The diameter of the glass porous media was investigated at 2,5,and 10 mm.The results manifested that the enhancement in the Nusselt number of the nanofluid reached maximum values of 15%,18%,and 22%for nanofluid ferrofluid with volume concentrations of 0.02%,0.05%,and 0.1%,respectively,for Coil-A.The maximum values of Nusselt number enhancement were 14%,17%,and 20%for ferrofluid concentrations of 0.02%,0.05%,and 0.1 vol.%,respectively,for Coil-B.The results also elucidated that the nanofluid mass flow and heat transfer rates could be noticeably compared to water.Where the increase is 5%,10%,and 20%for each concentration and diameter of the porous media,it specifies the enormous ranges of operational and geometrical parameters.展开更多
This study investigates laminar convection in three regimes(forced convection,mixed convection,and natural convection)of a bi-nanofluid(Cu-Al_(2)O_(3)-water)/mono-nanofluid(Al_(2)O_(3)-water)inside a square enclosure ...This study investigates laminar convection in three regimes(forced convection,mixed convection,and natural convection)of a bi-nanofluid(Cu-Al_(2)O_(3)-water)/mono-nanofluid(Al_(2)O_(3)-water)inside a square enclosure of sliding vertical walls which are kept at cold temperature and moving up,down,or in opposite directions.The enclosure bottom is heated partially by a central heat source of various sizes while the horizontal walls are considered adiabatic.The thermal conductivity and dynamic viscosity are dependent on temperature and nanoparticle size.The conservation equations are implemented in the solver ANSYS R2(2020).The numerical predictions are successfully validated by comparison with data from the literature.Numerical simulations are carried out for various volume fractions of solid mono/hybrid-nanoparticles(0≤ϕ≤5%),Richardson numbers(0.001≤Ri≤10),and hot source lengths((1/5)H≤ε≤(4/5)H).Isothermal lines,streamlines,and average Nusselt numbers are analyzed.The thermal performance of nanofluids is compared to that of the base heat transfer fluid(water).Outcomes illustrate the flow characteristics significantly affected by the convection regime,hot source size,sidewall motion,and concentration of solid nanoparticles.In the case of sidewalls moving downward,using hybrid nanofluid(Cu-Al_(2)O_(3)-water)shows the highest heat transfer rate in the enclosure at Ri=1,ε=(4/5)H and volume fraction ofφ=5%where a significant increment(25.14%)of Nusselt number is obtained.展开更多
The thermal nanofluids have garnered widespread attention for their use in multiple thermal systems,including heating processes,sustainable energy,and nuclear reactions.Research on nanofluids has revealed that the the...The thermal nanofluids have garnered widespread attention for their use in multiple thermal systems,including heating processes,sustainable energy,and nuclear reactions.Research on nanofluids has revealed that the thermal efficiencies of such materials are adversely affected by various thermal features.The purpose of the current work is to demonstrate the thermal analysis of Jeffrey nanofluids with the suspension of microorganisms in the presence of variable thermal sources.The variable effects of thermal conductivity,Brownian diffusivity,and motile density are utilized.The investigated model also reveals the contributions of radiation phenomena and chemical reactions.A porous,saturated,moving surface with a suction phenomenon promotes flow.The modeling of the problem is based on the implementation of the Cattaneo-Christov approach.The convective thermal constraints are used to promote the heat transfer features.A simplified form of the governing model is treated with the assistance of a shooting technique.The physical effects of different parameters for the problem are presented.The current problem justifies its applications in heat transfer,coating processes,heat exchangers,cooling systems in microelectronics,solar systems,chemical processes,etc.展开更多
The use of nanofluids as heat transfer media represents an innovative strategy to enhance heat transfer performances.This study investigates experimentally the turbulent convective heat transfer characteristics of wat...The use of nanofluids as heat transfer media represents an innovative strategy to enhance heat transfer performances.This study investigates experimentally the turbulent convective heat transfer characteristics of waterbased nanofluids containing TiO_(2),CuO,and graphene nanoplatelet(GNP)nanoparticles as they flow through a copper tube.Both the dynamic viscosity and thermal conductivity of these nanofluids were modeled and experimentally measured across varying nanoparticle concentrations(0.01,0.02,and 0.03 vol.%)and temperatures(25℃,35℃,and 45℃).The findings indicate that the behavior of nanofluids depends on the parameter used for comparison with the base fluid.Notably,both the friction factor and heat transfer coefficient increase with higher nanoparticle volume concentrations at a constant Reynolds number.The results further reveal that the GNP/water nanofluid,with a volume concentration of 0.03%at 45℃,exhibit the highest Nusselt number,followed by the CuO/water and TiO_(2)/water nanofluids,with respective increases of 17.8%,11.09%,and 8.11%.展开更多
This paper discusses the model of the boundary layer(BL)flow and the heat transfer characteristics of hybrid nanofluid(HNF)over shrinking/stretching disks.In addition,the thermal radiation and the impact of velocity a...This paper discusses the model of the boundary layer(BL)flow and the heat transfer characteristics of hybrid nanofluid(HNF)over shrinking/stretching disks.In addition,the thermal radiation and the impact of velocity and thermal slip boundary conditions are also examined.The considered hybrid nano-fluid contains silver(Ag)and iron oxide(Fe_(3)O_(4))nanoparticles dispersed in the water to prepare the Ag-Fe_(3)O_(4)/water-based hybrid nanofluid.The requisite posited partial differential equations model is converted to ordinary differential equations using similarity transformations.For a numerical solution,the shooting method in Maple is employed.Moreover,the duality in solutions is achieved for both cases of the disk(stretching(λ>0)and shrinking(λ<0)).At the same time,a unique solution is observed for λ=0.No solution is found for them at λ<λ_(c),whereas the solutions are split at the λ=λ_(c).Besides,the value of the λ_(c) is dependent on the φ_(hnf).Meanwhile,the values of f″(0)and -θ′(0)intensified with increasing φ_(hnf).Stability analysis has been applied using bvp4c in MATLAB software due to a dual solution.Furthermore,analysis shows that the first solution is stable and feasible physically.For the slip parameters,an increase in the velocity slip parameter increases the velocity and shear stress profiles while increasing the temperature profile in the first solutions.While the rise in thermal slip parameter reduces the temperature profile nanoparticle volume fractions increase it.展开更多
This study explores free convective heat transfer in an electrically conducting nanofluid flow over a moving semi-infinite flat plate under the influence of an induced magnetic field and viscous dissipation.The veloci...This study explores free convective heat transfer in an electrically conducting nanofluid flow over a moving semi-infinite flat plate under the influence of an induced magnetic field and viscous dissipation.The velocity and magnetic field vectors are aligned at a distance from the plate.The Spectral Relaxation Method(SRM)is used to numerically solve the coupled nonlinear partial differential equations,analyzing the effects of the Eckert number on heat and mass transfer.Various nanofluids containing Cu,Ag,Al_(2)O_(3),and TiO_(2) nanoparticles are examined to assess how external magnetic fields influence fluid behavior.Key parameters,including the nanoparticle volume fraction ϕ,magnetic parameter M,magnetic Prandtl number Prm,and Eckert number Ec,are evaluated for their impact on velocity,induced magnetic field,and heat transfer.Results indicate that increasing the magnetic parameter reduces velocity and magnetic field components in alumina-water nanofluids,while a higher nanoparticle volume fraction enhances the thermal boundary layer.Greater viscous dissipation(Ec)increases temperature,and Al_(2)O_(3) nanofluids exhibit higher speeds than Cu,Ag,and TiO_(2) due to density differences.Silver-water nanofluids,with their higher density,move more slowly.The SRM results closely align with those from Maple,confirming the method’s accuracy.展开更多
The growth of computing power in data centers(DCs)leads to an increase in energy consumption and noise pollution of air cooling systems.Chip-level cooling with high-efficiency coolant is one of the promising methods t...The growth of computing power in data centers(DCs)leads to an increase in energy consumption and noise pollution of air cooling systems.Chip-level cooling with high-efficiency coolant is one of the promising methods to address the cooling challenge for high-power devices in DCs.Hybrid nanofluid(HNF)has the advantages of high thermal conductivity and good rheological properties.This study summarizes the numerical investigations of HNFs in mini/micro heat sinks,including the numerical methods,hydrothermal characteristics,and enhanced heat transfer technologies.The innovations of this paper include:(1)the characteristics,applicable conditions,and scenarios of each theoretical method and numerical method are clarified;(2)the molecular dynamics(MD)simulation can reveal the synergy effect,micro motion,and agglomeration morphology of different nanoparticles.Machine learning(ML)presents a feasiblemethod for parameter prediction,which provides the opportunity for the intelligent regulation of the thermal performance of HNFs;(3)the HNFs flowboiling and the synergy of passive and active technologies may further improve the overall efficiency of liquid cooling systems in DCs.This review provides valuable insights and references for exploring the multi-phase flow and heat transport mechanisms of HNFs,and promoting the practical application of HNFs in chip-level liquid cooling in DCs.展开更多
The addition of dispersed-phase nanoparticles in the liquid phase can enhance the gas-liquid transfer process as the suspended nanoparticles affect the transfer process inside the fluid through microdisturbance or mic...The addition of dispersed-phase nanoparticles in the liquid phase can enhance the gas-liquid transfer process as the suspended nanoparticles affect the transfer process inside the fluid through microdisturbance or micro-convection effects.In this article,a high-speed digital camera was used to visualize the bubble behavior of CO_(2) in pure water and nanofluids to examine the effects of CO_(2) gas flow rate,nanoparticle solid content and type on the bubble behavior in the fluids.The CO_(2) absorption performance in three water-based nanofluids were compared in a bubbler.And the mass transfer characteristics during CO_(2) bubble absorption and the reasons for the enhanced gas-liquid mass transfer effect of nanoparticles were analyzed.The results showed that the presence of nanoparticles affected the formation process of bubbles in the fluid,shortened the bubble detachment time,reduced the detachment diameter,effectively increased the gas-liquid contact area,and improved the bubbles detachment frequency.The system with MCM-41 corresponded to a higher overall mass transfer coefficient.Uncalined MCM-41 contained surfactant that enhanced foaming behavior in water.This prevented the transfer of CO_(2) to some extent,and the CO_(2) absorption by uncalined MCM-41/H_(2)O was 5.34%higher than that by pure water.Compared with SiO_(2) nanoparticles with the same particle size and the same composition,MCM-41 had a higher adsorption capacity and better hydrophilicity due to its larger specific surface area and rich porous structure,which was more favorable to accelerate the collision between nanoparticles and CO_(2) bubbles to cause micro-convection.Under the condition of 0.1%(mass)solid content,the enhancement of CO_(2) absorption process by MCM-41 nanoparticles was more significant and improved by 16.9%compared with pure water.展开更多
In this paper,a new approach called the Eulerian species method was proposed for simulating the convective and/or boiling heat transfer of nanofluids.The movement of nanoparticles in nanofluids is tracked by the speci...In this paper,a new approach called the Eulerian species method was proposed for simulating the convective and/or boiling heat transfer of nanofluids.The movement of nanoparticles in nanofluids is tracked by the species transport equation,and the boiling process of nanofluids is computed by the Eulerian multiphase method coupled with the RPI boiling model.The validity of the species transport equation for simulating nanoparticles movement was verified by conducting a simulation of nanofluids convective heat transfer.Simulation results of boiling heat transfer of nanofluids were obtained by using the commercial CFD software ANSYS Fluent and compared with experimental data and results from another numerical method(Eulerian three-phase model).Good agreement with experimental data was achieved,and it was proved the Eulerian species method is better than the Eulerian three-phase model since it can give better simulation results with higher accuracy but needs fewer computation resources.展开更多
The hybrid convective boundary layer circulation involving multiple nanofluids via a medium with pores is approaching a sloping plate. An investigation regarding the heat-generating effects upon the examined nanofluid...The hybrid convective boundary layer circulation involving multiple nanofluids via a medium with pores is approaching a sloping plate. An investigation regarding the heat-generating effects upon the examined nanofluid flows has been carried out through computational analysis. A mathematical framework employing governing differential equations that are partial has been implemented to produce an ensemble of ordinary differential equations, which happen to be nonlinear that incorporate nanofluid flows by utilizing acceptable transformations. Through the combination of the Nachtsheim-Swigert shooting method and the Runge-Kutta method, the group of resulting non-dimensionalized equations is solved computationally. In a few special, confined cases, the corresponding numeric output is thereafter satisfactorily matched with the existing available research. The consequences of heat generation regarding local skin friction coefficient and rate of heat in conjunction with mass transfer have been investigated, evaluated, and reported on the basis of multiple nanofluid flows.展开更多
A parabolic trough solar collector(PTSC)converts solar radiation into thermal energy.However,low thermal efficiency of PTSC poses a hindrance to the deployment of solar thermal power plants.Thermal performance of PTSC...A parabolic trough solar collector(PTSC)converts solar radiation into thermal energy.However,low thermal efficiency of PTSC poses a hindrance to the deployment of solar thermal power plants.Thermal performance of PTSC is enhanced in this study by incorporating magnetic nanoparticles into the working fluid.The circular receiver pipe,with dimensions of 66 mm diameter,2 mm thickness,and 24 m length,is exposed to uniform temperature and velocity conditions.The working fluid,Therminol-66,is supplemented with Fe3O4 magnetic nanoparticles at concentrations ranging from 1%to 4%.The findings demonstrate that the inclusion of nanoparticles increases the convective heat transfer coefficient(HTC)of the PTSC,with higher nanoparticle volume fractions leading to greater heat transfer but increased pressure drop.The thermal enhancement factor(TEF)of the PTSC is positively affected by the volume fraction of nanoparticles,both with and without a magnetic field.Notably,the scenario with a 4%nanoparticle volume fraction and a magnetic field strength of 250 G exhibits the highest TEF,indicating superior thermal performance.These findings offer potential avenues for improving the efficiency of PTSCs in solar thermal plants by introducing magnetic nanoparticles into the working fluid.展开更多
We report on the magnetohydrodynamic impact on the axisymmetric flow of Al_(2)O_(3)/Cu nanoparticles suspended in H_(2)O past a stretched/shrinked sheet.With the use of partial differential equations and the correspon...We report on the magnetohydrodynamic impact on the axisymmetric flow of Al_(2)O_(3)/Cu nanoparticles suspended in H_(2)O past a stretched/shrinked sheet.With the use of partial differential equations and the corresponding thermophysical characteristics of nanoparticles,the physical flow process is illustrated.The resultant nonlinear system of partial differential equations is converted into a system of ordinary differential equations using the suitable similarity transformations.The transformed differential equations are solved analytically.Impacts of the magnetic parameter,solid volume fraction and stretching/shrinking parameter on momentum and temperature distribution have been analyzed and interpreted graphically.The skin friction and Nusselt number were also evaluated.In addition,existence of dual solution was deduced for the shrinking sheet and unique solution for the stretching one.Further,Al_(2)O_(3)/H_(2)O nanofluid flow has better thermal conductivity on comparing with Cu/H_(2)O nanofluid.Furthermore,it was found that the first solutions of the stream are stable and physically realizable,whereas those of the second ones are unstable.展开更多
The rheological properties and limited flow velocities of solvent-free nanofluids are crucial for their technologically significant applications.In particular,the flow in a solvent-free nanofluid system is steady only...The rheological properties and limited flow velocities of solvent-free nanofluids are crucial for their technologically significant applications.In particular,the flow in a solvent-free nanofluid system is steady only when the flow velocity is lower than a critical value.In this paper,we establish a rigid-flexible dynamic model to investigate the existence of the upper bound on the steady flow velocities for three solvent-free nanofluid systems.Then,the effects of the structural parameters on the upper bound on the steady flow velocities are examined with the proposed structure-preserving method.It is found that each of these solvent-free nanofluid systems has an upper bound on the steady flow velocity,which exhibits distinct dependence on their structural parameters,such as the graft density of branch chains and the size of the cores.In addition,among the three types of solvent-free nanofluids,the magnetic solvent-free nanofluid poses the largest upper bound on the steady flow velocity,demonstrating that it is a better choice when a large flow velocity is required in real applications.展开更多
The application of mathematical modeling to biological fluids is of utmost importance, as it has diverse applicationsin medicine. The peristaltic mechanism plays a crucial role in understanding numerous biological flo...The application of mathematical modeling to biological fluids is of utmost importance, as it has diverse applicationsin medicine. The peristaltic mechanism plays a crucial role in understanding numerous biological flows. In thispaper, we present a theoretical investigation of the double diffusion convection in the peristaltic transport of aPrandtl nanofluid through an asymmetric tapered channel under the combined action of thermal radiation andan induced magnetic field. The equations for the current flow scenario are developed, incorporating relevantassumptions, and considering the effect of viscous dissipation. The impact of thermal radiation and doublediffusion on public health is of particular interest. For instance, infrared radiation techniques have been used totreat various skin-related diseases and can also be employed as a measure of thermotherapy for some bones toenhance blood circulation, with radiation increasing blood flow by approximately 80%. To solve the governingequations, we employ a numerical method with the aid of symbolic software such as Mathematica and MATLAB.The velocity, magnetic force function, pressure rise, temperature, solute (species) concentration, and nanoparticlevolume fraction profiles are analytically derived and graphically displayed. The results outcomes are compared withthe findings of limiting situations for verification.展开更多
A heat exchanger’s performance depends heavily on the operating fluid’s transfer of heat capacity and thermal conductivity.Adding nanoparticles of high thermal conductivity materials is a significant way to enhance ...A heat exchanger’s performance depends heavily on the operating fluid’s transfer of heat capacity and thermal conductivity.Adding nanoparticles of high thermal conductivity materials is a significant way to enhance the heat transfer fluid’s thermal conductivity.This research used engine oil containing alumina(Al_(2)O_(3))nanoparticles and copper oxide(CuO)to test whether or not the heat exchanger’s efficiency could be improved.To establish the most effective elements for heat transfer enhancement,the heat exchangers thermal performance was tested at 0.05%and 0.1%concentrations for Al_(2)O_(3)and CuO nanoparticles.The simulation results showed that the percentage increase in Nusselt number(Nu)for nanofluid at 0.05%particle concentration compared to pure oil was 9.71%for CuO nanofluids and 6.7%for Al_(2)O_(3)nanofluids.At 0.1%concentration,the enhancement percentage in Nu was approximately 23%for CuO and 18.67%for Al_(2)O_(3)nanofluids,respectively.At a concentration of 0.1%,CuO nanofluid increased the LMTD and overall heat transfer coefficient(U)by 7.24 and 5.91%respectively.Both the overall heat transfer coefficient(U)and the heat transfer coefficient(hn)for CuO nanofluid at a concentration of 0.1%increased by 5.91%and 10.68%,respectively.The effectiveness(εn)of a heat exchanger was increased by roughly 4.09%with the use of CuO nanofluid in comparison to Al_(2)O_(3)at a concentration of 0.1%.The amount of exergy destruction in DTHX goes down as Re and volume fractions go up.Moreover,at 0.05%and 0.1%nanoparticle concentrations,the percentage increase in dimensionless exergy is 10.55%and 13.08%,respectively.Finally,adding the CuO and Al_(2)O_(3)nanoparticles improved the thermal conductivity of the main fluid(oil),resulting in a considerable increase in the thermal performance and rate of heat transfer of a heat exchanger.展开更多
To improve the efficiency of coal seam water injection,the influence of nanofluids on coal surface wettability was studied based on the nano drag reduction and injection enhancement technology in the field of tertiary...To improve the efficiency of coal seam water injection,the influence of nanofluids on coal surface wettability was studied based on the nano drag reduction and injection enhancement technology in the field of tertiary oil recovery.The composition optimization and performance evaluation of nanofluids with nano-silica and sodium lauryl sulfate as the main components were carried out,and the effects of the nanofluid with the optimal ratio on coal wettability were studied through spontaneous upward imbibition experiments.The results show that the composite nanofluid has a lower surface tension,and the lowest value of the interfacial tension is 15.79 m N/m.Therefore,the composite nanofluid can enhance the wettability of coal.However,its effects on coal samples with different metamorphic degrees is different,that is,low rank coal is the largest,middle rank coal is the second,and high rank coal is the least.In addition,a functional relationship between time and imbibition height is found for pulverized coal with different particle sizes.When the particle size of pulverized coal is 60–80 mesh,the wettability of nanofluid to coal is best.The findings in this paper provide a new perspective for improving the water injection efficiency for coal seams with low permeability.展开更多
In the present research,Tiwari and Das model are used for the impact of a magnetic field on non-Newtonian nanofluid flow in the presence of injection and suction.The PDEs are converted into ordinary differential equat...In the present research,Tiwari and Das model are used for the impact of a magnetic field on non-Newtonian nanofluid flow in the presence of injection and suction.The PDEs are converted into ordinary differential equations(ODEs)using the similarity method.The obtained ordinary differential equations are solved numerically using shooting method along with RK-4.Part of the present study uses nanoparticles(NPs)like TiO_(2) andAl_(2)O_(3) and sodium carboxymethyl cellulose(CMC/water)is considered as a base fluid(BF).This study is conducted to find the influence of nanoparticles,Prandtl number,and magnetic field on velocity and temperature profile,however,the Nusselt number and coefficient of skin friction parameters are also presented in detail with the variation of nanoparticles and parameters.The obtained results of the present study are presented usingMATLAB.In addition to these,some simulations of partial differential equations are also shown using software for graphing surface plots of velocity profile and streamlines along with surface plots and isothermal contours of the temperature profile.展开更多
A numerical analysis of the log-law behavior for the turbulent boundary layer of a wall-bounded flow is performed over a flat plate immersed in three nanofluids(Zn O-water,SiO_(2)-water,TiO_(2)-water).Numerical simula...A numerical analysis of the log-law behavior for the turbulent boundary layer of a wall-bounded flow is performed over a flat plate immersed in three nanofluids(Zn O-water,SiO_(2)-water,TiO_(2)-water).Numerical simulations using CFD code are employed to investigate the boundary layer and the hydrodynamic flow.To validate the current numerical model,measurement points from published works were used,and the compared results were in good compliance.Simulations were carried out for the velocity series of 0.04,0.4 and 4 m/s and nanoparticle concentrations0.1% and 5%.The influence of nanoparticles’ concentration on velocity,temperature profiles,wall shear stress,and turbulent intensity was investigated.The obtained results showed that the viscous sub-layer,the buffer layer,and the loglaw layer along the potential-flow layer could be analyzed based on their curving quality in the regions which have just a single wall distance.It was seen that the viscous sub-layer is the biggest area in comparison with other areas.Alternatively,the section where the temperature changes considerably correspond to the thermal boundary layer’s thickness goes a downward trend when the velocity decreases.The thermal boundary layer gets deep away from the leading edge.However,a rise in the volume fraction of nanoparticles indicated a minor impact on the shear stress developed in the wall.In all cases,the thickness of the boundary layer undergoes a downward trend as the velocity increases,whereas increasing the nanoparticle concentrations would enhance the thickness.More precisely,the log layer is closed with log law,and it is minimal between Y^(+)=50 and Y^(+)=95.The temperature for nanoparticle concentration φ=5%is higher than that for φ=0.1%,in boundary layers,for all studied nanofluids.However,it is established that the behavior is inverted from the value of Y^(+)=1 and the temperature for φ =0.1% is more important than the case of φ =5%.For turbulence intensity peak,this peak exists at Y^(+)=100 for v=4 m/s,Y^(+)=10 for v=0.4 m/s and Y^(+)=8 for v=0.04 m/s.展开更多
基金supported by DST-FIST(Government of India)(Grant No.SR/FIST/MS-1/2017/13)and Seed Money Project(Grant No.DoRDC/733).
文摘This study numerically examines the heat and mass transfer characteristics of two ternary nanofluids via converging and diverg-ing channels.Furthermore,the study aims to assess two ternary nanofluids combinations to determine which configuration can provide better heat and mass transfer and lower entropy production,while ensuring cost efficiency.This work bridges the gap be-tween academic research and industrial feasibility by incorporating cost analysis,entropy generation,and thermal efficiency.To compare the velocity,temperature,and concentration profiles,we examine two ternary nanofluids,i.e.,TiO_(2)+SiO_(2)+Al_(2)O_(3)/H_(2)O and TiO_(2)+SiO_(2)+Cu/H_(2)O,while considering the shape of nanoparticles.The velocity slip and Soret/Dufour effects are taken into consideration.Furthermore,regression analysis for Nusselt and Sherwood numbers of the model is carried out.The Runge-Kutta fourth-order method with shooting technique is employed to acquire the numerical solution of the governed system of ordinary differential equations.The flow pattern attributes of ternary nanofluids are meticulously examined and simulated with the fluc-tuation of flow-dominating parameters.Additionally,the influence of these parameters is demonstrated in the flow,temperature,and concentration fields.For variation in Eckert and Dufour numbers,TiO_(2)+SiO_(2)+Al_(2)O_(3)/H_(2)O has a higher temperature than TiO_(2)+SiO_(2)+Cu/H_(2)O.The results obtained indicate that the ternary nanofluid TiO_(2)+SiO_(2)+Al_(2)O_(3)/H_(2)O has a higher heat transfer rate,lesser entropy generation,greater mass transfer rate,and lower cost than that of TiO_(2)+SiO_(2)+Cu/H_(2)O ternary nanofluid.
文摘This study delves into both experimental and analytical examinations of heat exchange in a straight channel, where Al_(2)O_(3)-water nanofluids are utilized, spanning the Reynolds number spectrum from 100 to 1800. Diverse volume fractions(1%, 2%, and 3%) of Al_(2)O_(3)-water nanofluids are meticulously prepared and analyzed. The essential physical properties of these nanofluids, critical for evaluating their thermal and flow characteristics, have been comprehensively assessed. From a quantitative perspective, numerical simulations are employed to predict the Nusselt number(Nu) and friction factor(f). The empirical findings reveal intriguing trends: the friction factor experiences an upward trend with diminishing velocity, attributed to heightened molecular cohesion. Conversely, the friction factor demonstrates a decline with diminishing volume fractions, a consequence of reduced particle size. Both the nanofluid's viscosity and heat transfer coefficient exhibit a rise in tandem with augmented volume flow rate and concentration gradient. Notably, the simulation results harmonize remarkably well with experimental data. Rigorous validation against prior studies underscores the robust consistency of these outcomes. In the pursuit of augmenting heat transfer, a volume fraction of 3% emerges as particularly influential, yielding an impressive 53.8% enhancement. Minor increments in the friction factor, while present, prove negligible and can be safely overlooked.
文摘High-efficiency solar energy systems are characterized by their designs,which primarily rely on effective concentration and conversion methods of solar radiation.Evaluation of the performance enhancement of flat plate solar collectors by integration with thermal energy storage could be achieved through simulation of proposed designs.The work aims to analyze a new solar collector integrated with a porous medium and shell and coiled tube heat exchanger.The heat transfer enhancement was investigated by varying the geometrical parameters in shell and helically coiled tubes operating with CuFe_(2)O_(4)/water with different volume fractions of 0.02%,0.05%,and 0.1 vol.%.This study presents an experimental and numerical investigation of the performance of the flat plate solar collector integrated with a helical coil heat exchanger using nanofluids.The solar collector has a dimension of 180 cm×80 cm and works with close-loop systems operated by the thermo siphon method.Two types of helical coil heat exchangers,Coil-A and Coil-B have been investigated.The diameter of the glass porous media was investigated at 2,5,and 10 mm.The results manifested that the enhancement in the Nusselt number of the nanofluid reached maximum values of 15%,18%,and 22%for nanofluid ferrofluid with volume concentrations of 0.02%,0.05%,and 0.1%,respectively,for Coil-A.The maximum values of Nusselt number enhancement were 14%,17%,and 20%for ferrofluid concentrations of 0.02%,0.05%,and 0.1 vol.%,respectively,for Coil-B.The results also elucidated that the nanofluid mass flow and heat transfer rates could be noticeably compared to water.Where the increase is 5%,10%,and 20%for each concentration and diameter of the porous media,it specifies the enormous ranges of operational and geometrical parameters.
文摘This study investigates laminar convection in three regimes(forced convection,mixed convection,and natural convection)of a bi-nanofluid(Cu-Al_(2)O_(3)-water)/mono-nanofluid(Al_(2)O_(3)-water)inside a square enclosure of sliding vertical walls which are kept at cold temperature and moving up,down,or in opposite directions.The enclosure bottom is heated partially by a central heat source of various sizes while the horizontal walls are considered adiabatic.The thermal conductivity and dynamic viscosity are dependent on temperature and nanoparticle size.The conservation equations are implemented in the solver ANSYS R2(2020).The numerical predictions are successfully validated by comparison with data from the literature.Numerical simulations are carried out for various volume fractions of solid mono/hybrid-nanoparticles(0≤ϕ≤5%),Richardson numbers(0.001≤Ri≤10),and hot source lengths((1/5)H≤ε≤(4/5)H).Isothermal lines,streamlines,and average Nusselt numbers are analyzed.The thermal performance of nanofluids is compared to that of the base heat transfer fluid(water).Outcomes illustrate the flow characteristics significantly affected by the convection regime,hot source size,sidewall motion,and concentration of solid nanoparticles.In the case of sidewalls moving downward,using hybrid nanofluid(Cu-Al_(2)O_(3)-water)shows the highest heat transfer rate in the enclosure at Ri=1,ε=(4/5)H and volume fraction ofφ=5%where a significant increment(25.14%)of Nusselt number is obtained.
基金appreciation to King Saud University for funding this work through researchers supporting project(No.RSPD2025R1056).
文摘The thermal nanofluids have garnered widespread attention for their use in multiple thermal systems,including heating processes,sustainable energy,and nuclear reactions.Research on nanofluids has revealed that the thermal efficiencies of such materials are adversely affected by various thermal features.The purpose of the current work is to demonstrate the thermal analysis of Jeffrey nanofluids with the suspension of microorganisms in the presence of variable thermal sources.The variable effects of thermal conductivity,Brownian diffusivity,and motile density are utilized.The investigated model also reveals the contributions of radiation phenomena and chemical reactions.A porous,saturated,moving surface with a suction phenomenon promotes flow.The modeling of the problem is based on the implementation of the Cattaneo-Christov approach.The convective thermal constraints are used to promote the heat transfer features.A simplified form of the governing model is treated with the assistance of a shooting technique.The physical effects of different parameters for the problem are presented.The current problem justifies its applications in heat transfer,coating processes,heat exchangers,cooling systems in microelectronics,solar systems,chemical processes,etc.
文摘The use of nanofluids as heat transfer media represents an innovative strategy to enhance heat transfer performances.This study investigates experimentally the turbulent convective heat transfer characteristics of waterbased nanofluids containing TiO_(2),CuO,and graphene nanoplatelet(GNP)nanoparticles as they flow through a copper tube.Both the dynamic viscosity and thermal conductivity of these nanofluids were modeled and experimentally measured across varying nanoparticle concentrations(0.01,0.02,and 0.03 vol.%)and temperatures(25℃,35℃,and 45℃).The findings indicate that the behavior of nanofluids depends on the parameter used for comparison with the base fluid.Notably,both the friction factor and heat transfer coefficient increase with higher nanoparticle volume concentrations at a constant Reynolds number.The results further reveal that the GNP/water nanofluid,with a volume concentration of 0.03%at 45℃,exhibit the highest Nusselt number,followed by the CuO/water and TiO_(2)/water nanofluids,with respective increases of 17.8%,11.09%,and 8.11%.
基金the Researchers Supporting Project number(RSPD2025R997),King Saud University,Riyadh,Saudi Arabia.
文摘This paper discusses the model of the boundary layer(BL)flow and the heat transfer characteristics of hybrid nanofluid(HNF)over shrinking/stretching disks.In addition,the thermal radiation and the impact of velocity and thermal slip boundary conditions are also examined.The considered hybrid nano-fluid contains silver(Ag)and iron oxide(Fe_(3)O_(4))nanoparticles dispersed in the water to prepare the Ag-Fe_(3)O_(4)/water-based hybrid nanofluid.The requisite posited partial differential equations model is converted to ordinary differential equations using similarity transformations.For a numerical solution,the shooting method in Maple is employed.Moreover,the duality in solutions is achieved for both cases of the disk(stretching(λ>0)and shrinking(λ<0)).At the same time,a unique solution is observed for λ=0.No solution is found for them at λ<λ_(c),whereas the solutions are split at the λ=λ_(c).Besides,the value of the λ_(c) is dependent on the φ_(hnf).Meanwhile,the values of f″(0)and -θ′(0)intensified with increasing φ_(hnf).Stability analysis has been applied using bvp4c in MATLAB software due to a dual solution.Furthermore,analysis shows that the first solution is stable and feasible physically.For the slip parameters,an increase in the velocity slip parameter increases the velocity and shear stress profiles while increasing the temperature profile in the first solutions.While the rise in thermal slip parameter reduces the temperature profile nanoparticle volume fractions increase it.
文摘This study explores free convective heat transfer in an electrically conducting nanofluid flow over a moving semi-infinite flat plate under the influence of an induced magnetic field and viscous dissipation.The velocity and magnetic field vectors are aligned at a distance from the plate.The Spectral Relaxation Method(SRM)is used to numerically solve the coupled nonlinear partial differential equations,analyzing the effects of the Eckert number on heat and mass transfer.Various nanofluids containing Cu,Ag,Al_(2)O_(3),and TiO_(2) nanoparticles are examined to assess how external magnetic fields influence fluid behavior.Key parameters,including the nanoparticle volume fraction ϕ,magnetic parameter M,magnetic Prandtl number Prm,and Eckert number Ec,are evaluated for their impact on velocity,induced magnetic field,and heat transfer.Results indicate that increasing the magnetic parameter reduces velocity and magnetic field components in alumina-water nanofluids,while a higher nanoparticle volume fraction enhances the thermal boundary layer.Greater viscous dissipation(Ec)increases temperature,and Al_(2)O_(3) nanofluids exhibit higher speeds than Cu,Ag,and TiO_(2) due to density differences.Silver-water nanofluids,with their higher density,move more slowly.The SRM results closely align with those from Maple,confirming the method’s accuracy.
基金funded by the Science and Technology Project of Tianjin(No.24YDTPJC00680)the National Natural Science Foundation of China(No.52406191).
文摘The growth of computing power in data centers(DCs)leads to an increase in energy consumption and noise pollution of air cooling systems.Chip-level cooling with high-efficiency coolant is one of the promising methods to address the cooling challenge for high-power devices in DCs.Hybrid nanofluid(HNF)has the advantages of high thermal conductivity and good rheological properties.This study summarizes the numerical investigations of HNFs in mini/micro heat sinks,including the numerical methods,hydrothermal characteristics,and enhanced heat transfer technologies.The innovations of this paper include:(1)the characteristics,applicable conditions,and scenarios of each theoretical method and numerical method are clarified;(2)the molecular dynamics(MD)simulation can reveal the synergy effect,micro motion,and agglomeration morphology of different nanoparticles.Machine learning(ML)presents a feasiblemethod for parameter prediction,which provides the opportunity for the intelligent regulation of the thermal performance of HNFs;(3)the HNFs flowboiling and the synergy of passive and active technologies may further improve the overall efficiency of liquid cooling systems in DCs.This review provides valuable insights and references for exploring the multi-phase flow and heat transport mechanisms of HNFs,and promoting the practical application of HNFs in chip-level liquid cooling in DCs.
基金financial support from National Natural Science Foundation of China(22108263)Shanxi Province Basic Research Program Project(20210302124060)the 18th Graduate Student Technology Project of North University of China(20221824).
文摘The addition of dispersed-phase nanoparticles in the liquid phase can enhance the gas-liquid transfer process as the suspended nanoparticles affect the transfer process inside the fluid through microdisturbance or micro-convection effects.In this article,a high-speed digital camera was used to visualize the bubble behavior of CO_(2) in pure water and nanofluids to examine the effects of CO_(2) gas flow rate,nanoparticle solid content and type on the bubble behavior in the fluids.The CO_(2) absorption performance in three water-based nanofluids were compared in a bubbler.And the mass transfer characteristics during CO_(2) bubble absorption and the reasons for the enhanced gas-liquid mass transfer effect of nanoparticles were analyzed.The results showed that the presence of nanoparticles affected the formation process of bubbles in the fluid,shortened the bubble detachment time,reduced the detachment diameter,effectively increased the gas-liquid contact area,and improved the bubbles detachment frequency.The system with MCM-41 corresponded to a higher overall mass transfer coefficient.Uncalined MCM-41 contained surfactant that enhanced foaming behavior in water.This prevented the transfer of CO_(2) to some extent,and the CO_(2) absorption by uncalined MCM-41/H_(2)O was 5.34%higher than that by pure water.Compared with SiO_(2) nanoparticles with the same particle size and the same composition,MCM-41 had a higher adsorption capacity and better hydrophilicity due to its larger specific surface area and rich porous structure,which was more favorable to accelerate the collision between nanoparticles and CO_(2) bubbles to cause micro-convection.Under the condition of 0.1%(mass)solid content,the enhancement of CO_(2) absorption process by MCM-41 nanoparticles was more significant and improved by 16.9%compared with pure water.
基金supported by theResearch Starting Programof Ludong University(Grant No.221/20220045).
文摘In this paper,a new approach called the Eulerian species method was proposed for simulating the convective and/or boiling heat transfer of nanofluids.The movement of nanoparticles in nanofluids is tracked by the species transport equation,and the boiling process of nanofluids is computed by the Eulerian multiphase method coupled with the RPI boiling model.The validity of the species transport equation for simulating nanoparticles movement was verified by conducting a simulation of nanofluids convective heat transfer.Simulation results of boiling heat transfer of nanofluids were obtained by using the commercial CFD software ANSYS Fluent and compared with experimental data and results from another numerical method(Eulerian three-phase model).Good agreement with experimental data was achieved,and it was proved the Eulerian species method is better than the Eulerian three-phase model since it can give better simulation results with higher accuracy but needs fewer computation resources.
文摘The hybrid convective boundary layer circulation involving multiple nanofluids via a medium with pores is approaching a sloping plate. An investigation regarding the heat-generating effects upon the examined nanofluid flows has been carried out through computational analysis. A mathematical framework employing governing differential equations that are partial has been implemented to produce an ensemble of ordinary differential equations, which happen to be nonlinear that incorporate nanofluid flows by utilizing acceptable transformations. Through the combination of the Nachtsheim-Swigert shooting method and the Runge-Kutta method, the group of resulting non-dimensionalized equations is solved computationally. In a few special, confined cases, the corresponding numeric output is thereafter satisfactorily matched with the existing available research. The consequences of heat generation regarding local skin friction coefficient and rate of heat in conjunction with mass transfer have been investigated, evaluated, and reported on the basis of multiple nanofluid flows.
文摘A parabolic trough solar collector(PTSC)converts solar radiation into thermal energy.However,low thermal efficiency of PTSC poses a hindrance to the deployment of solar thermal power plants.Thermal performance of PTSC is enhanced in this study by incorporating magnetic nanoparticles into the working fluid.The circular receiver pipe,with dimensions of 66 mm diameter,2 mm thickness,and 24 m length,is exposed to uniform temperature and velocity conditions.The working fluid,Therminol-66,is supplemented with Fe3O4 magnetic nanoparticles at concentrations ranging from 1%to 4%.The findings demonstrate that the inclusion of nanoparticles increases the convective heat transfer coefficient(HTC)of the PTSC,with higher nanoparticle volume fractions leading to greater heat transfer but increased pressure drop.The thermal enhancement factor(TEF)of the PTSC is positively affected by the volume fraction of nanoparticles,both with and without a magnetic field.Notably,the scenario with a 4%nanoparticle volume fraction and a magnetic field strength of 250 G exhibits the highest TEF,indicating superior thermal performance.These findings offer potential avenues for improving the efficiency of PTSCs in solar thermal plants by introducing magnetic nanoparticles into the working fluid.
基金LMP acknowledges financial support from ANID through Convocatoria Nacional Subvención a Instalación en la Academia Convocatoria Año 2021,Grant SA77210040。
文摘We report on the magnetohydrodynamic impact on the axisymmetric flow of Al_(2)O_(3)/Cu nanoparticles suspended in H_(2)O past a stretched/shrinked sheet.With the use of partial differential equations and the corresponding thermophysical characteristics of nanoparticles,the physical flow process is illustrated.The resultant nonlinear system of partial differential equations is converted into a system of ordinary differential equations using the suitable similarity transformations.The transformed differential equations are solved analytically.Impacts of the magnetic parameter,solid volume fraction and stretching/shrinking parameter on momentum and temperature distribution have been analyzed and interpreted graphically.The skin friction and Nusselt number were also evaluated.In addition,existence of dual solution was deduced for the shrinking sheet and unique solution for the stretching one.Further,Al_(2)O_(3)/H_(2)O nanofluid flow has better thermal conductivity on comparing with Cu/H_(2)O nanofluid.Furthermore,it was found that the first solutions of the stream are stable and physically realizable,whereas those of the second ones are unstable.
基金Project supported by the National Natural Science Foundation of China(No.12172281)the Fund of the Science and Technology Innovation Team of Shaanxi Province of China(No.2022TD-61)+2 种基金the Open Project of State Key Laboratory of Performance Monitoring and Protecting of Rail Transit InfrastructureEast China Jiaotong University(No.HJGZ2023102)the Shaanxi Province Key Research and Development Project(No.2024SFYBXM-531)。
文摘The rheological properties and limited flow velocities of solvent-free nanofluids are crucial for their technologically significant applications.In particular,the flow in a solvent-free nanofluid system is steady only when the flow velocity is lower than a critical value.In this paper,we establish a rigid-flexible dynamic model to investigate the existence of the upper bound on the steady flow velocities for three solvent-free nanofluid systems.Then,the effects of the structural parameters on the upper bound on the steady flow velocities are examined with the proposed structure-preserving method.It is found that each of these solvent-free nanofluid systems has an upper bound on the steady flow velocity,which exhibits distinct dependence on their structural parameters,such as the graft density of branch chains and the size of the cores.In addition,among the three types of solvent-free nanofluids,the magnetic solvent-free nanofluid poses the largest upper bound on the steady flow velocity,demonstrating that it is a better choice when a large flow velocity is required in real applications.
基金Institutional Fund Projects under No.(IFP-A-2022-2-5-24)by Ministry of Education and University of Hafr Al Batin,Saudi Arabia.
文摘The application of mathematical modeling to biological fluids is of utmost importance, as it has diverse applicationsin medicine. The peristaltic mechanism plays a crucial role in understanding numerous biological flows. In thispaper, we present a theoretical investigation of the double diffusion convection in the peristaltic transport of aPrandtl nanofluid through an asymmetric tapered channel under the combined action of thermal radiation andan induced magnetic field. The equations for the current flow scenario are developed, incorporating relevantassumptions, and considering the effect of viscous dissipation. The impact of thermal radiation and doublediffusion on public health is of particular interest. For instance, infrared radiation techniques have been used totreat various skin-related diseases and can also be employed as a measure of thermotherapy for some bones toenhance blood circulation, with radiation increasing blood flow by approximately 80%. To solve the governingequations, we employ a numerical method with the aid of symbolic software such as Mathematica and MATLAB.The velocity, magnetic force function, pressure rise, temperature, solute (species) concentration, and nanoparticlevolume fraction profiles are analytically derived and graphically displayed. The results outcomes are compared withthe findings of limiting situations for verification.
文摘A heat exchanger’s performance depends heavily on the operating fluid’s transfer of heat capacity and thermal conductivity.Adding nanoparticles of high thermal conductivity materials is a significant way to enhance the heat transfer fluid’s thermal conductivity.This research used engine oil containing alumina(Al_(2)O_(3))nanoparticles and copper oxide(CuO)to test whether or not the heat exchanger’s efficiency could be improved.To establish the most effective elements for heat transfer enhancement,the heat exchangers thermal performance was tested at 0.05%and 0.1%concentrations for Al_(2)O_(3)and CuO nanoparticles.The simulation results showed that the percentage increase in Nusselt number(Nu)for nanofluid at 0.05%particle concentration compared to pure oil was 9.71%for CuO nanofluids and 6.7%for Al_(2)O_(3)nanofluids.At 0.1%concentration,the enhancement percentage in Nu was approximately 23%for CuO and 18.67%for Al_(2)O_(3)nanofluids,respectively.At a concentration of 0.1%,CuO nanofluid increased the LMTD and overall heat transfer coefficient(U)by 7.24 and 5.91%respectively.Both the overall heat transfer coefficient(U)and the heat transfer coefficient(hn)for CuO nanofluid at a concentration of 0.1%increased by 5.91%and 10.68%,respectively.The effectiveness(εn)of a heat exchanger was increased by roughly 4.09%with the use of CuO nanofluid in comparison to Al_(2)O_(3)at a concentration of 0.1%.The amount of exergy destruction in DTHX goes down as Re and volume fractions go up.Moreover,at 0.05%and 0.1%nanoparticle concentrations,the percentage increase in dimensionless exergy is 10.55%and 13.08%,respectively.Finally,adding the CuO and Al_(2)O_(3)nanoparticles improved the thermal conductivity of the main fluid(oil),resulting in a considerable increase in the thermal performance and rate of heat transfer of a heat exchanger.
基金supported by the National Natural Science Foundation of China(Nos.51974176,51934004,52174194)the Shandong Province Natural Science Foundation of Outstanding Youth Fund(ZR2020JQ22)+1 种基金the Shandong Province Colleges and Universities Youth Innovation and Technology Support Program(2019KJH006)the Special funds for Taishan scholar project(TS20190935)。
文摘To improve the efficiency of coal seam water injection,the influence of nanofluids on coal surface wettability was studied based on the nano drag reduction and injection enhancement technology in the field of tertiary oil recovery.The composition optimization and performance evaluation of nanofluids with nano-silica and sodium lauryl sulfate as the main components were carried out,and the effects of the nanofluid with the optimal ratio on coal wettability were studied through spontaneous upward imbibition experiments.The results show that the composite nanofluid has a lower surface tension,and the lowest value of the interfacial tension is 15.79 m N/m.Therefore,the composite nanofluid can enhance the wettability of coal.However,its effects on coal samples with different metamorphic degrees is different,that is,low rank coal is the largest,middle rank coal is the second,and high rank coal is the least.In addition,a functional relationship between time and imbibition height is found for pulverized coal with different particle sizes.When the particle size of pulverized coal is 60–80 mesh,the wettability of nanofluid to coal is best.The findings in this paper provide a new perspective for improving the water injection efficiency for coal seams with low permeability.
基金The fifth author also thanks Prince Sultan University for funding this work through research-group number RG-DES2017-01-17.
文摘In the present research,Tiwari and Das model are used for the impact of a magnetic field on non-Newtonian nanofluid flow in the presence of injection and suction.The PDEs are converted into ordinary differential equations(ODEs)using the similarity method.The obtained ordinary differential equations are solved numerically using shooting method along with RK-4.Part of the present study uses nanoparticles(NPs)like TiO_(2) andAl_(2)O_(3) and sodium carboxymethyl cellulose(CMC/water)is considered as a base fluid(BF).This study is conducted to find the influence of nanoparticles,Prandtl number,and magnetic field on velocity and temperature profile,however,the Nusselt number and coefficient of skin friction parameters are also presented in detail with the variation of nanoparticles and parameters.The obtained results of the present study are presented usingMATLAB.In addition to these,some simulations of partial differential equations are also shown using software for graphing surface plots of velocity profile and streamlines along with surface plots and isothermal contours of the temperature profile.
基金support he received through General Research Project under the grant number (R.G.P.2/138/42)。
文摘A numerical analysis of the log-law behavior for the turbulent boundary layer of a wall-bounded flow is performed over a flat plate immersed in three nanofluids(Zn O-water,SiO_(2)-water,TiO_(2)-water).Numerical simulations using CFD code are employed to investigate the boundary layer and the hydrodynamic flow.To validate the current numerical model,measurement points from published works were used,and the compared results were in good compliance.Simulations were carried out for the velocity series of 0.04,0.4 and 4 m/s and nanoparticle concentrations0.1% and 5%.The influence of nanoparticles’ concentration on velocity,temperature profiles,wall shear stress,and turbulent intensity was investigated.The obtained results showed that the viscous sub-layer,the buffer layer,and the loglaw layer along the potential-flow layer could be analyzed based on their curving quality in the regions which have just a single wall distance.It was seen that the viscous sub-layer is the biggest area in comparison with other areas.Alternatively,the section where the temperature changes considerably correspond to the thermal boundary layer’s thickness goes a downward trend when the velocity decreases.The thermal boundary layer gets deep away from the leading edge.However,a rise in the volume fraction of nanoparticles indicated a minor impact on the shear stress developed in the wall.In all cases,the thickness of the boundary layer undergoes a downward trend as the velocity increases,whereas increasing the nanoparticle concentrations would enhance the thickness.More precisely,the log layer is closed with log law,and it is minimal between Y^(+)=50 and Y^(+)=95.The temperature for nanoparticle concentration φ=5%is higher than that for φ=0.1%,in boundary layers,for all studied nanofluids.However,it is established that the behavior is inverted from the value of Y^(+)=1 and the temperature for φ =0.1% is more important than the case of φ =5%.For turbulence intensity peak,this peak exists at Y^(+)=100 for v=4 m/s,Y^(+)=10 for v=0.4 m/s and Y^(+)=8 for v=0.04 m/s.
