Rapid technological advancements drive miniaturization and high energy density in devices,thereby increasing nanoscale thermal management demands and urging development of higher spatial resolution technologies for th...Rapid technological advancements drive miniaturization and high energy density in devices,thereby increasing nanoscale thermal management demands and urging development of higher spatial resolution technologies for thermal imaging and transport research.Here,we introduce an approach to measure nanoscale thermal resistance using in situ inelastic scanning transmission electron microscopy.By constructing unidirectional heating flux with controlled temperature gradients and analyzing electron energy-loss/gain signals under optimized acquisition conditions,nanometer-resolution in mapping phonon apparent temperature is achieved.Thus,interfacial thermal resistance is determined by calculating the ratio of interfacial temperature difference to bulk temperature gradient.This methodology enables direct measurement of thermal transport properties for atomic-scale structural features(e.g.,defects and heterointerfaces),resolving critical structure-performance relationships,providing a useful tool for investigating thermal phenomena at the(sub-)nanoscale.展开更多
The rapid advancement of nanotechnology has sparked much interest in applying nanoscale perovskite materials for photodetection applications.These materials are promising candidates for next-generation photodetectors(...The rapid advancement of nanotechnology has sparked much interest in applying nanoscale perovskite materials for photodetection applications.These materials are promising candidates for next-generation photodetectors(PDs)due to their unique optoelectronic properties and flexible synthesis routes.This review explores the approaches used in the development and use of optoelectronic devices made of different nanoscale perovskite architectures,including quantum dots,nanosheets,nanorods,nanowires,and nanocrystals.Through a thorough analysis of recent literature,the review also addresses common issues like the mechanisms underlying the degradation of perovskite PDs and offers perspectives on potential solutions to improve stability and scalability that impede widespread implementation.In addition,it highlights that photodetection encompasses the detection of light fields in dimensions other than light intensity and suggests potential avenues for future research to overcome these obstacles and fully realize the potential of nanoscale perovskite materials in state-of-the-art photodetection systems.This review provides a comprehensive overview of nanoscale perovskite PDs and guides future research efforts towards improved performance and wider applicability,making it a valuable resource for researchers.展开更多
Alloying strategies have proven effective in enhancing the properties of metallic materials.However,conventional alloying strategies face significant limitations in preparing nanoscale multi-alloys and continuous opti...Alloying strategies have proven effective in enhancing the properties of metallic materials.However,conventional alloying strategies face significant limitations in preparing nanoscale multi-alloys and continuous optimizing surface-active sites.High-entropy alloys(HEAs)display a broader spectrum of unique properties due to their complex electron distribution and atomic-level heterogeneity arising from the stochastic mixing of multiple elements,which provides a diverse array of binding sites and almost continuous distribution of binding energies.This review aims to summarize recent research advancements in synthesis strategies and multi-field applications of nanoscale HEAs.It emphasizes several commonly employed synthesis strategies and significant challenges in synthesizing nanoscale HEAs.Finally,we present a comprehensive analysis of the advantages of HEAs for multi-field applications,emphasizing significant application trends related to nanosizing and multidimensionalization to develop more efficient nanoscale HEAs.展开更多
Nanoscale drug delivery systems(nano-DDSs)have attracted intense interest in tumor chemotherapy in the last decades,to improve antitumor efficacy and minimize toxic and side effects.As a versatile supramolecular build...Nanoscale drug delivery systems(nano-DDSs)have attracted intense interest in tumor chemotherapy in the last decades,to improve antitumor efficacy and minimize toxic and side effects.As a versatile supramolecular building block,cyclodextrins(CDs)have been widely used in the fabrication of the smart nano-DDSs.Besides their multifunctionality,which makes them versatile core in the star(co)polymers for micellar nanomedicines,specific host-vip inclusion complexation via their hydrophobic cavities endows them diversified functions:(i)design of amphiphilic copolymers for micellar nanomedicines,(ii)supramolecular hydrogels and poly(pseudo)rotaxane nano-hydrogels as drug carriers,and(iii)recipient for direct and indirect drug-loading.In the present work,the recent progress of CDs in nano-DDSs for tumor chemotherapy was reviewed,classified by the crucial roles of CD units.Based on the structureperformance relationship,the future perspective was also proposed.展开更多
Particulate photocatalytic systems using nanoscale photocatalysts have been developed as an attractive promising route for solar energy utilization to achieve resource sustainability and environmental harmony.Dynamic ...Particulate photocatalytic systems using nanoscale photocatalysts have been developed as an attractive promising route for solar energy utilization to achieve resource sustainability and environmental harmony.Dynamic obstacles are considered as the dominant inhibition for attaining satisfactory energy-conversion efficiency.The complexity in light absorption and carrier transfer behaviors has remained to be further clearly illuminated.It is challenging to trace the fast evolution of charge carriers involved in transfer migration and interfacial reactions within a micro–nano-single-particle photocatalyst,which requires spatiotemporal high resolution.In this review,comprehensive dynamic descriptions including irradiation field,carrier separation and transfer,and interfacial reaction processes have been elucidated and discussed.The corresponding mechanisms for revealing dynamic behaviors have been explained.In addition,numerical simulation and modeling methods have been illustrated for the description of the irradiation field.Experimental measurements and spatiotemporal characterizations have been clarified for the reflection of carrier behavior and probing detection of interfacial reactions.The representative applications have been introduced according to the reported advanced research works,and the relationships between mechanistic conclusions from variable spatiotemporal measurements and photocatalytic performance results in the specific photocatalytic reactions have been concluded.This review provides a collective perspective for the full understanding and thorough evaluation of the primary dynamic processes,which would be inspired for the improvement in designing solar-driven energy-conversion systems based on nanoscale particulate photocatalysts.展开更多
Shape memory alloys(SMAs)are well-suited for vibration and noise reduction due to their outstanding mechanical and damping properties.However,their damping capacity is limited due to low-temperature stabilized thermoe...Shape memory alloys(SMAs)are well-suited for vibration and noise reduction due to their outstanding mechanical and damping properties.However,their damping capacity is limited due to low-temperature stabilized thermoelastic martensite and constrained twin migration.This work designs nanoscale Nb phases to enhance the damping capacity and maintain a wide working temperature range of NiTiHf-based SMAs.The NiTiHf/Nb alloys containing spherical Nb phases demonstrate a 125%improvement in internal friction(IF)and remain stable up to 400 K.Alloys with spherical Nb phases exhibit relatively high intrinsic IF,which is mainly attibuted to the high migration ability of martensitic twin boundaries.High-resolution transmission electron microscopy images and IF spectra suggest spherical Nb phases pro-vide additional dislocation damping effects and interface damping effects by inducing multiple types of dislocations near the multi-directional phase interfaces.These findings provide insights into the role of second-phase shape effect in damping properties and offer valuable guidance for designing ultra-high damping alloys.展开更多
Precise control and measurement of nanoparticles using low-power optical tweezers are pivotal for advancing single-particle analysis,nanoscale sensing,and energy transport research.In this work,we present the tipassis...Precise control and measurement of nanoparticles using low-power optical tweezers are pivotal for advancing single-particle analysis,nanoscale sensing,and energy transport research.In this work,we present the tipassisted nanoparticle capture system that simultaneously achieves localized temperature probing and nanoparticle trapping,significantly lowering the required laser power input.Unlike traditional metal-tip plasmonic techniques that predominantly rely on intense electric field gradients,our approach employs a silicon nanotip under resonant laser excitation,uniquely integrating optical forces,thermophoretic forces,and interatomic interactions for stable nanoparticle confinement.This synergistic collaboration mechanism enables approximately a 42%reduction in laser power density compared to conventional bowtie nanoaperture methods.This experimental method achieved direct and simultaneous Raman-based measurements of localized thermal dynamics,providing new insights into nanoscale thermodynamics during optical trapping.Additionally,the silicon nanotip demonstrates reduced thermal transport due to its confined nanoscale geometry,aligning closely with our theoretical predictions.Our integrated strategy of efficient nanoparticle manipulation coupled with precise thermal probing not only enhances overall energy efficiency but also broadens the scope of potential applications in cutting-edge nanoscience and nanotechnology.展开更多
Micro/nanoscale robots(MNRs)have attracted significant interest in various fields because of their flexible design,physically controlled maneuvering,and barrier targeting.The execution of specific functions using MNRs...Micro/nanoscale robots(MNRs)have attracted significant interest in various fields because of their flexible design,physically controlled maneuvering,and barrier targeting.The execution of specific functions using MNRs relies on precise propulsion methods.Among the diverse propulsion techniques,physical propulsion is widely used owing to its noninvasive,safe,and convenient attributes.This review provides an analysis of the propulsion mechanisms in the magnetic,electric,thermal,and ultrasound fields and presents a comprehensive summary of the structures,movements,and applications of various MNRs while also examining their advantages and shortcomings associated with various physical propulsion methods.Finally,challenges and perspectives associated with the future development of MNRs are presented.The content of this review can serve as a multidisciplinary science reference for physicists,bioengineers,clinicians,roboticists,and chemists involved in pharmaceutical design and clinical therapy research.展开更多
Recent advances in strain engineering have enabled unprecedented control over quantum states in strongly correlated magnetic systems.However,nanoscale strain modulation of charge density waves(CDWs)and magnetically ex...Recent advances in strain engineering have enabled unprecedented control over quantum states in strongly correlated magnetic systems.However,nanoscale strain modulation of charge density waves(CDWs)and magnetically excited states,which is crucial for atomically precise strain engineering and practical spintronic applications,remains unexplored.Here,we report the nanoscale strain effects on CDWs and low-energy electronic states in the van der Waals antiferromagnetic metal GdTe_(3),utilizing scanning tunneling microscopy/spectroscopy.Lowtemperature cleavage introduces local strains,resulting in the formation of nanoscale wrinkles on the GdTe_(3)surface.Atomic displacement analysis reveals two distinct types of wrinkles:Wrinkle-I,originating from unidirectional strain,and Wrinkle-II,dominated by shear strain.In Wrinkle-I,the tensile strain enhances the CDW gap,while the compressive strain induces a single low-energy magnetic state.Wrinkle-II switches the orientation of CDW,leading to the formation of an associated CDW domain wall.In addition,three low-energy magnetic states that exhibit magnetic field-dependent shifts and intensity variations emerge within the CDW gap around Wrinkle-II,indicative of a strain-tuned coupling between CDW order and localized 4f-electron magnetism.These findings establish nanoscale strain as a powerful tuning knob for manipulating intertwined electronic and magnetic excitations in correlated magnetic systems.展开更多
One-dimensional nano-grating standard(ODNGS)is widely recognized as a crucial nanometric standard for metrological technology.However,achieving the ultratiny size of ODNGS with high consistent uniformity and low rough...One-dimensional nano-grating standard(ODNGS)is widely recognized as a crucial nanometric standard for metrological technology.However,achieving the ultratiny size of ODNGS with high consistent uniformity and low roughness by conventional processes such as the inductively coupled plasma(ICP)etching methodpresents a significant challenge in obtaining accurate calibration values.In this work,a 50-nm ODNGS with a conformal buffer layer(Al_(2)O_(3))is successfully obtained,indicating outstanding stability and abrasion resistance.Remarkably,the introduction of hydrogen silsesquioxane(HSQ)and amorphous Al_(2)O_(3)simultaneously guarantees an incredibly small expanded uncertainty(0.5 nm)and repeatability of the standard uniformity(less than 0.3 nm)in the grating dimensions.TheⅠ-Ⅴcurves of ODNGS with an Al_(2)O_(3)buffer layer at room temperature(RT)and200℃are depicted respectively to showcase the sustained favorable insulation properties.Notably,the nanostructure fluctuation,line edge roughness(LER)and line width roughness(LWR)of the standard can be decreased obviously by 64.1%,63%and 70%,respectively.Our results suggest that the ODNGS with Al_(2)O_(3)exhibits exceptional precision and robust calibration reliability for calibrating nanoscale measuring instruments.It holds tremendous potential for manufacturing high-precision nanostructures and grating arrays with precisely controllable dimensions,which will play a pivotal role in the fabrication of microfluidics chips,metasurface and photodetectors in the future.展开更多
For the treatment of the quantum effect of charge distribution in nanoscale MOSFETs,a quantum correction model using Levenberg-Marquardt back-propagation neural networks is presented that can predict the quantum densi...For the treatment of the quantum effect of charge distribution in nanoscale MOSFETs,a quantum correction model using Levenberg-Marquardt back-propagation neural networks is presented that can predict the quantum density from the classical density. The training speed and accuracy of neural networks with different hidden layers and numbers of neurons are studied. We conclude that high training speed and accuracy can be obtained using neural networks with two hidden layers,but the number of neurons in the hidden layers does not have a noticeable effect, For single and double-gate nanoscale MOSFETs, our model can easily predict the quantum charge density in the silicon layer,and it agrees closely with the Schrodinger-Poisson approach.展开更多
Nanoscale bimetallic Ni/Fe particles were synthesized from the reaction of sodium borohydride （NaBH4） with reduction of Ni^2＋ and Fe^2＋ in aqueous solution. The obtained Ni/Fe particles were characterized by TEM ...Nanoscale bimetallic Ni/Fe particles were synthesized from the reaction of sodium borohydride （NaBH4） with reduction of Ni^2＋ and Fe^2＋ in aqueous solution. The obtained Ni/Fe particles were characterized by TEM （transmission electron microscope）, XRD （X-ray diffractometer）, and N2-BET. The dechlorination activity of the Ni/Fe was investigated using p-chlorophenol （p-CP） as a probe agent. Results demonstrated that the nanoscale Ni/Fe could effectively dechlorinate p-CP at relatively low metal to solution ratio of 0.4 g/L （Ni 5 wt%）. The target with initial concentration ofp-CP 0.625 mmol/L was dechlorinted completely in 60 rain under ambient temperature and pressure. Factors affecting dechlorination efficiency, including reaction temperature, pH, Ni loading percentage over Fe, and metal to solution ratio, were investigated. The possible mechanism of dechlorination ofp-CP was proposed and discussed. The pseudo-first- order reaction took place on the surface of the Ni/Fe bimetallic particles, and the activation energy of the dechlorination reaction was determined to be 21.2 kJ/mol at the temperature rang of 287-313 K.展开更多
Al80Ni6 Y8 Co4 Cu2 amorphous ribbons were isothermally annealed and a mixed structure consisting of α-Al particle with a size of less than 15nm and Al3Ni compound with a size of about 30nm was obtained. The crystall...Al80Ni6 Y8 Co4 Cu2 amorphous ribbons were isothermally annealed and a mixed structure consisting of α-Al particle with a size of less than 15nm and Al3Ni compound with a size of about 30nm was obtained. The crystallization kinetics of Al80Ni6 Y8 Co4 Cu2 amorphous alloy shows that the precipitation of α-Al particles is the growth process controlled by diffusion of the solute elements rejected from the growing crystals. By quenching at different cooling rates, a mixed structure consisting of nanoscale α-Al particles and the remaining glass matrix or structure consisting of nanoscale particle (Al phase or Al3Ni compound) with a size of about 100nm was formed. The addition of Co elements and Cu elements to Al-Ni-Y alloy systems increases the glass formation ability of the alloy and the thermal stability of the supercooled liquid region against crystallization, which results from significant difference of atomic size, strong bonding nature among constituent elements and the low diffisivity of the solute elements due to the concentration gradient in the growing front of crystals.展开更多
Nanoscale electrocatalysts have exhibited promising activity and stability,improving the kinetics of numerous electrochemical reactions in renewable energy systems such as electrolyzers,fuel cells,and metal-air batter...Nanoscale electrocatalysts have exhibited promising activity and stability,improving the kinetics of numerous electrochemical reactions in renewable energy systems such as electrolyzers,fuel cells,and metal-air batteries.Due to the size effect,nano particles with extreme small size have high surface areas,complicated morphology,and various surface terminations,which make them different from their bulk phases and often undergo restructuring during the reactions.These restructured materials are hard to probe by conventional ex-situ characterizations,thus leaving the true reaction centers and/or active sites difficult to determine.Nowadays,in situ techniques,particularly X-ray absorption spectroscopy(XAS),have become an important tool to obtain oxidation states,electronic structure,and local bonding environments,which are critical to investigate the electrocatalysts under real reaction conditions.In this review,we go over the basic principles of XAS and highlight recent applications of in situ XAS in studies of nanoscale electrocatalysts.展开更多
Catalytic nickel was successfully incorporated into nanoscale iron to enhance its dechlorination efficiency for trichloroethylene （TCE）, one of the most commonly detected chlorinated organic compounds in groundwater...Catalytic nickel was successfully incorporated into nanoscale iron to enhance its dechlorination efficiency for trichloroethylene （TCE）, one of the most commonly detected chlorinated organic compounds in groundwater. Ethane was the predominant product. The greatest dechlorination efficiency was achieved at 22 molar percent of nickel. This nanoscale Ni-Fe is poorly ordered and inhomogeneous; iron dissolution occurred whereas nickel was relatively stable during the 24-hr reaction. The morphological characterization provided significant new insights on the mechanism of catalytic hydrodcchlorination by bimetallic nanoparticles. TCE degradation and ethane production rates were greatly affected by environmental parameters such as solution pH, temperature and common groundwater ions. Both rate constants decreased and then increased over the pH range of 6.5 to 8.0, with the minimum value occurring at pH 7.5. TCE degradation rate constant showed an increasing trend over the temperature range of 10 to 25℃. However, ethane production rate constant increased and then decreased over the range, with the maximum value occurring at 20℃, Most salts in the solution appeared to enhance the reaction in the first half hour but overall they displayed an inhibitory effect. Combined ions showed a similar effect as individual salts.展开更多
In this study, bimetallic nanoscale zero-valent iron particles（nZVI）, including copper/nanoscale zero-valent iron particles（Cu/nZVI） and nickel/nanoscale zero-valent iron particles（Ni/nZVI）, were synthesized by ...In this study, bimetallic nanoscale zero-valent iron particles（nZVI）, including copper/nanoscale zero-valent iron particles（Cu/nZVI） and nickel/nanoscale zero-valent iron particles（Ni/nZVI）, were synthesized by one-step liquid-phase reduction and applied for oxytetracycline（OTC） removal. The effects of contact time and initial p H on the removal efficiency were studied. The as-prepared nanoscale particles were characterized by scanning electron microscopy（SEM）, energy dispersive spectroscopy（EDS） and X-ray diffraction（XRD）. Finally, the degradation mechanisms of OTC utilizing the as-prepared nanoparticles were investigated by using X-ray photoelectron spectroscopy（XPS） and mass spectrometry（MS）. Cu/n ZVI presented remarkable ability for OTC degradation and removed71.44% of OTC（100 mg/L） in 4 hr, while only 62.34% and 31.05% of OTC was degraded by Ni/nZVI and nZVI respectively. XPS and MS analysis suggested that OTC was broken down to form small molecules by ·OH radicals generated from the corrosion of Fe0. Cu/nZVI and Ni/n ZVI have been proved to have potential as materials for application in OTC removal because of their significant degradation ability toward OTC.展开更多
Hydrothermal method was used to synthesize nanoscale particles of MnZn ferrites. The crystallites were characterized by XRD, TEM and SEM. The effects of the reaction time, temperature and additives on the product were...Hydrothermal method was used to synthesize nanoscale particles of MnZn ferrites. The crystallites were characterized by XRD, TEM and SEM. The effects of the reaction time, temperature and additives on the product were investigated. Crystallization process would be carried out above 160 ℃ for 5 h or more, higher temperature can reduce the reaction time. Additives were used to remove impurities such as Fe 2O 3, ZnMnO 3.10～15 nm pure slightly agglomerated MnZn ferrite crystallites with a narrow grain size distribution were obtained.展开更多
Excess phosphorus from non-point pollution sources is one of the key factors causing eutrophication in many lakes in China,so finding a cost-effective method to remove phosphorus from non-point pollution sources is ve...Excess phosphorus from non-point pollution sources is one of the key factors causing eutrophication in many lakes in China,so finding a cost-effective method to remove phosphorus from non-point pollution sources is very important for the health of the aqueous environment. Graphene was selected to support nanoscale zero-valent iron（nZVI）for phosphorus removal from synthetic rainwater runoff in this article. Compared with nZVI supported on other porous materials,graphene-supported nZVI（G-nZVI） could remove phosphorus more efficiently. The amount of nZVI in G-nZVI was an important factor in the removal of phosphorus by G-nZVI,and G-nZVI with 20 wt.% nZVI（20% G-nZVI）could remove phosphorus most efficiently. The nZVI was very stable and could disperse very well on graphene,as characterized by transmission electron microscopy（TEM） and scanning electron microscopy（SEM）. X-ray photoelectron spectroscopy（XPS）,Fourier Transform infrared spectroscopy（FT-IR） and Raman spectroscopy were used to elucidate the reaction process,and the results indicated that Fe-O-P was formed after phosphorus was adsorbed by G-nZVI. The results obtained from X-ray diffraction（XRD） indicated that the reaction product between nZVI supported on graphene and phosphorus was Fe3（PO4）2·8H2O（Vivianite）. It was confirmed that the specific reaction mechanism for the removal of phosphorus with nZVI or G-nZVI was mainly due to chemical reaction between nZVI and phosphorus.展开更多
Sulfide-modified nanoscale zero-valent iron(S-nZVI) is a promising material for removal of organic pollutants from water, but S-nZVI nanoparticles(NPs) easily agglomerate and have poor contact with organic contaminant...Sulfide-modified nanoscale zero-valent iron(S-nZVI) is a promising material for removal of organic pollutants from water, but S-nZVI nanoparticles(NPs) easily agglomerate and have poor contact with organic contaminants.Herein, we propose a new S-nZVI/graphene aerogel(S-nZVI/GA) composite which exhibits superior removal capability for trichloroethylene(TCE) from water.Three-dimensional porous graphene aerogel(GA) can improve the efficiency of electron transport, enhance the adsorption of organic pollutants and restrain the agglomeration of the core-shell S-nZVI NPs.The TCE removal rates of Fe S, nZVI, GA and S-nZVI were 27.8%, 42%, 63% and 75% in 2 hr, respectively.Furthermore, TCE was completely removed within 50 min by S-nZVI/GA.The TCE removal rate increased with increasing p H and temperature, and TCE removal followed the pseudo-first-order kinetic model.The results demonstrate the great potential of S-nZVI/GA composite as a low-cost,easily separated and superior monolithic adsorbent for removal of organic pollutants.展开更多
In this study, a novel nanoscale zero-valent iron（n ZVI） composite material was successfully synthesized using a low-cost natural clay, ＂Hangjin 2~#clay＂（HJ clay） as the support and tested for the decolorization...In this study, a novel nanoscale zero-valent iron（n ZVI） composite material was successfully synthesized using a low-cost natural clay, ＂Hangjin 2~#clay＂（HJ clay） as the support and tested for the decolorization of the azo dye Methyl Orange（MO） in aqueous solution by n ZVI particles. According to the characterization and MO decolorization experiments, the sample with 5：1 HJ clay-supported n ZVI（HJ/n ZVI） mass ratio（HJ-n ZVI5） showed the best dispersion and reactivity and the highest MO decolorization efficiency. With the same equivalent Fe0 dosage, the HJ-n ZVI1 and HJ-n ZVI5 samples demonstrated a synergetic effect for the decolorization of MO： their decolorization efficiencies were much higher than that achieved by physical mixing of HJ clay and n ZVIs, or the sum of HJ clay and n ZVIs alone. The synergetic effect was primarily due to the improved dispersion and more effective utilization of the n ZVI particles on/in the composite materials. Higher decolorization efficiency of MO was obtained at larger HJ-n ZVI dosage, higher temperature and under N2 atmosphere, while the MO initial concentration and p H were negatively correlated to the efficiency. HJ clay not only works as a carrier for n ZVI nanoparticles, but also contributes to the decolorization through an ＂adsorption-enhanced reduction＂ mechanism. The high efficiency of HJ-n ZVI for decontamination gives it great potential for use in a variety of remediation applications.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.52125307)the National Key R&D Program of China(Grant No.2021YFB3501500)the support from the New Cornerstone Science Foundation through the XPLORER PRIZE。
文摘Rapid technological advancements drive miniaturization and high energy density in devices,thereby increasing nanoscale thermal management demands and urging development of higher spatial resolution technologies for thermal imaging and transport research.Here,we introduce an approach to measure nanoscale thermal resistance using in situ inelastic scanning transmission electron microscopy.By constructing unidirectional heating flux with controlled temperature gradients and analyzing electron energy-loss/gain signals under optimized acquisition conditions,nanometer-resolution in mapping phonon apparent temperature is achieved.Thus,interfacial thermal resistance is determined by calculating the ratio of interfacial temperature difference to bulk temperature gradient.This methodology enables direct measurement of thermal transport properties for atomic-scale structural features(e.g.,defects and heterointerfaces),resolving critical structure-performance relationships,providing a useful tool for investigating thermal phenomena at the(sub-)nanoscale.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(No.RS-2022–00165798)Anhui Natural Science Foundation(No.2308085MF211)The authors extend their appreciation to the Deanship of Research and Graduate Studies at King Khalid University for funding this work through Large Research Project under Grant Number(R.G.P.2/491/45).
文摘The rapid advancement of nanotechnology has sparked much interest in applying nanoscale perovskite materials for photodetection applications.These materials are promising candidates for next-generation photodetectors(PDs)due to their unique optoelectronic properties and flexible synthesis routes.This review explores the approaches used in the development and use of optoelectronic devices made of different nanoscale perovskite architectures,including quantum dots,nanosheets,nanorods,nanowires,and nanocrystals.Through a thorough analysis of recent literature,the review also addresses common issues like the mechanisms underlying the degradation of perovskite PDs and offers perspectives on potential solutions to improve stability and scalability that impede widespread implementation.In addition,it highlights that photodetection encompasses the detection of light fields in dimensions other than light intensity and suggests potential avenues for future research to overcome these obstacles and fully realize the potential of nanoscale perovskite materials in state-of-the-art photodetection systems.This review provides a comprehensive overview of nanoscale perovskite PDs and guides future research efforts towards improved performance and wider applicability,making it a valuable resource for researchers.
基金supported by the National Natural Science Foundation of China(No.52273110(GGB)and 52372271(STL))the National Ten Thousand Talent Program of China(GGB)the Youth Top Talent Project of Hubei Provence of China(GGB).
文摘Alloying strategies have proven effective in enhancing the properties of metallic materials.However,conventional alloying strategies face significant limitations in preparing nanoscale multi-alloys and continuous optimizing surface-active sites.High-entropy alloys(HEAs)display a broader spectrum of unique properties due to their complex electron distribution and atomic-level heterogeneity arising from the stochastic mixing of multiple elements,which provides a diverse array of binding sites and almost continuous distribution of binding energies.This review aims to summarize recent research advancements in synthesis strategies and multi-field applications of nanoscale HEAs.It emphasizes several commonly employed synthesis strategies and significant challenges in synthesizing nanoscale HEAs.Finally,we present a comprehensive analysis of the advantages of HEAs for multi-field applications,emphasizing significant application trends related to nanosizing and multidimensionalization to develop more efficient nanoscale HEAs.
文摘Nanoscale drug delivery systems(nano-DDSs)have attracted intense interest in tumor chemotherapy in the last decades,to improve antitumor efficacy and minimize toxic and side effects.As a versatile supramolecular building block,cyclodextrins(CDs)have been widely used in the fabrication of the smart nano-DDSs.Besides their multifunctionality,which makes them versatile core in the star(co)polymers for micellar nanomedicines,specific host-vip inclusion complexation via their hydrophobic cavities endows them diversified functions:(i)design of amphiphilic copolymers for micellar nanomedicines,(ii)supramolecular hydrogels and poly(pseudo)rotaxane nano-hydrogels as drug carriers,and(iii)recipient for direct and indirect drug-loading.In the present work,the recent progress of CDs in nano-DDSs for tumor chemotherapy was reviewed,classified by the crucial roles of CD units.Based on the structureperformance relationship,the future perspective was also proposed.
基金supported by the Project of National Natural Science Foundation of China(22102095,21773153)the National Key Basic Research and Development Program(2018YFB1502001)financial support from the program of China Scholarships Council(No.202306230242).
文摘Particulate photocatalytic systems using nanoscale photocatalysts have been developed as an attractive promising route for solar energy utilization to achieve resource sustainability and environmental harmony.Dynamic obstacles are considered as the dominant inhibition for attaining satisfactory energy-conversion efficiency.The complexity in light absorption and carrier transfer behaviors has remained to be further clearly illuminated.It is challenging to trace the fast evolution of charge carriers involved in transfer migration and interfacial reactions within a micro–nano-single-particle photocatalyst,which requires spatiotemporal high resolution.In this review,comprehensive dynamic descriptions including irradiation field,carrier separation and transfer,and interfacial reaction processes have been elucidated and discussed.The corresponding mechanisms for revealing dynamic behaviors have been explained.In addition,numerical simulation and modeling methods have been illustrated for the description of the irradiation field.Experimental measurements and spatiotemporal characterizations have been clarified for the reflection of carrier behavior and probing detection of interfacial reactions.The representative applications have been introduced according to the reported advanced research works,and the relationships between mechanistic conclusions from variable spatiotemporal measurements and photocatalytic performance results in the specific photocatalytic reactions have been concluded.This review provides a collective perspective for the full understanding and thorough evaluation of the primary dynamic processes,which would be inspired for the improvement in designing solar-driven energy-conversion systems based on nanoscale particulate photocatalysts.
基金supported by the National Natural Science Foundation of China(Grant No.52471160).
文摘Shape memory alloys(SMAs)are well-suited for vibration and noise reduction due to their outstanding mechanical and damping properties.However,their damping capacity is limited due to low-temperature stabilized thermoelastic martensite and constrained twin migration.This work designs nanoscale Nb phases to enhance the damping capacity and maintain a wide working temperature range of NiTiHf-based SMAs.The NiTiHf/Nb alloys containing spherical Nb phases demonstrate a 125%improvement in internal friction(IF)and remain stable up to 400 K.Alloys with spherical Nb phases exhibit relatively high intrinsic IF,which is mainly attibuted to the high migration ability of martensitic twin boundaries.High-resolution transmission electron microscopy images and IF spectra suggest spherical Nb phases pro-vide additional dislocation damping effects and interface damping effects by inducing multiple types of dislocations near the multi-directional phase interfaces.These findings provide insights into the role of second-phase shape effect in damping properties and offer valuable guidance for designing ultra-high damping alloys.
基金supported by the National Natural Science Foundation of China(Grant No.52206107)the National Key R&D Program of China(Grant No.2023YFE0120200)。
文摘Precise control and measurement of nanoparticles using low-power optical tweezers are pivotal for advancing single-particle analysis,nanoscale sensing,and energy transport research.In this work,we present the tipassisted nanoparticle capture system that simultaneously achieves localized temperature probing and nanoparticle trapping,significantly lowering the required laser power input.Unlike traditional metal-tip plasmonic techniques that predominantly rely on intense electric field gradients,our approach employs a silicon nanotip under resonant laser excitation,uniquely integrating optical forces,thermophoretic forces,and interatomic interactions for stable nanoparticle confinement.This synergistic collaboration mechanism enables approximately a 42%reduction in laser power density compared to conventional bowtie nanoaperture methods.This experimental method achieved direct and simultaneous Raman-based measurements of localized thermal dynamics,providing new insights into nanoscale thermodynamics during optical trapping.Additionally,the silicon nanotip demonstrates reduced thermal transport due to its confined nanoscale geometry,aligning closely with our theoretical predictions.Our integrated strategy of efficient nanoparticle manipulation coupled with precise thermal probing not only enhances overall energy efficiency but also broadens the scope of potential applications in cutting-edge nanoscience and nanotechnology.
基金the National Natural Science Foundation of China(Nos.U2130128 and 12102376)Yanzhao Young Scientist Project from Natural Science Foundation of Hebei Province(No.B2023205040)+6 种基金Basic Research Cooperation Special Foundation of Beijing-Tianjin-Hebei Region(Nos.H2022205047,22JCZXJC00060,and E3B33911DF)Central Government Guiding Local Science and Technology Development Project(No.216Z4302G)Hebei Administration for Market Supervision Science and Technology Project List(No.2023ZC03)Innovation Capability Improvement Plan Project of Hebei Province(No.22567604H)Ph.D Scientific Research Start-up Fund(No.L2023B18)College Student’s Innovation and Entrepreneurship Training Plan Program(No.S202410094046)of Hebei Normal Universitythe Guangdong Basic and Applied Basic Research Foundation(No.2023A1515011592).
文摘Micro/nanoscale robots(MNRs)have attracted significant interest in various fields because of their flexible design,physically controlled maneuvering,and barrier targeting.The execution of specific functions using MNRs relies on precise propulsion methods.Among the diverse propulsion techniques,physical propulsion is widely used owing to its noninvasive,safe,and convenient attributes.This review provides an analysis of the propulsion mechanisms in the magnetic,electric,thermal,and ultrasound fields and presents a comprehensive summary of the structures,movements,and applications of various MNRs while also examining their advantages and shortcomings associated with various physical propulsion methods.Finally,challenges and perspectives associated with the future development of MNRs are presented.The content of this review can serve as a multidisciplinary science reference for physicists,bioengineers,clinicians,roboticists,and chemists involved in pharmaceutical design and clinical therapy research.
基金supported by the National Natural Science Foundation of China(Grant No.62488201)the National Key Research and Development Project of China(Grant No.2022YFA1204100)+1 种基金the Chinese Academy of Sciences Project for Young Scientists in Basic Research(Grant No.YSBR-003)the Innovation Program of Quantum Science and Technology(Grant No.2021ZD0302700).
文摘Recent advances in strain engineering have enabled unprecedented control over quantum states in strongly correlated magnetic systems.However,nanoscale strain modulation of charge density waves(CDWs)and magnetically excited states,which is crucial for atomically precise strain engineering and practical spintronic applications,remains unexplored.Here,we report the nanoscale strain effects on CDWs and low-energy electronic states in the van der Waals antiferromagnetic metal GdTe_(3),utilizing scanning tunneling microscopy/spectroscopy.Lowtemperature cleavage introduces local strains,resulting in the formation of nanoscale wrinkles on the GdTe_(3)surface.Atomic displacement analysis reveals two distinct types of wrinkles:Wrinkle-I,originating from unidirectional strain,and Wrinkle-II,dominated by shear strain.In Wrinkle-I,the tensile strain enhances the CDW gap,while the compressive strain induces a single low-energy magnetic state.Wrinkle-II switches the orientation of CDW,leading to the formation of an associated CDW domain wall.In addition,three low-energy magnetic states that exhibit magnetic field-dependent shifts and intensity variations emerge within the CDW gap around Wrinkle-II,indicative of a strain-tuned coupling between CDW order and localized 4f-electron magnetism.These findings establish nanoscale strain as a powerful tuning knob for manipulating intertwined electronic and magnetic excitations in correlated magnetic systems.
基金financially supported by the National Natural Science Foundation of China(No.52175434)the National Key Research and Development Program of China(No.2022YFB3204801)
文摘One-dimensional nano-grating standard(ODNGS)is widely recognized as a crucial nanometric standard for metrological technology.However,achieving the ultratiny size of ODNGS with high consistent uniformity and low roughness by conventional processes such as the inductively coupled plasma(ICP)etching methodpresents a significant challenge in obtaining accurate calibration values.In this work,a 50-nm ODNGS with a conformal buffer layer(Al_(2)O_(3))is successfully obtained,indicating outstanding stability and abrasion resistance.Remarkably,the introduction of hydrogen silsesquioxane(HSQ)and amorphous Al_(2)O_(3)simultaneously guarantees an incredibly small expanded uncertainty(0.5 nm)and repeatability of the standard uniformity(less than 0.3 nm)in the grating dimensions.TheⅠ-Ⅴcurves of ODNGS with an Al_(2)O_(3)buffer layer at room temperature(RT)and200℃are depicted respectively to showcase the sustained favorable insulation properties.Notably,the nanostructure fluctuation,line edge roughness(LER)and line width roughness(LWR)of the standard can be decreased obviously by 64.1%,63%and 70%,respectively.Our results suggest that the ODNGS with Al_(2)O_(3)exhibits exceptional precision and robust calibration reliability for calibrating nanoscale measuring instruments.It holds tremendous potential for manufacturing high-precision nanostructures and grating arrays with precisely controllable dimensions,which will play a pivotal role in the fabrication of microfluidics chips,metasurface and photodetectors in the future.
文摘For the treatment of the quantum effect of charge distribution in nanoscale MOSFETs,a quantum correction model using Levenberg-Marquardt back-propagation neural networks is presented that can predict the quantum density from the classical density. The training speed and accuracy of neural networks with different hidden layers and numbers of neurons are studied. We conclude that high training speed and accuracy can be obtained using neural networks with two hidden layers,but the number of neurons in the hidden layers does not have a noticeable effect, For single and double-gate nanoscale MOSFETs, our model can easily predict the quantum charge density in the silicon layer,and it agrees closely with the Schrodinger-Poisson approach.
基金Project supported by the National Basic Research Program (973) of China(No. 2003CB415006)the National Natural Science Foundation of China (No. 20337020)
文摘Nanoscale bimetallic Ni/Fe particles were synthesized from the reaction of sodium borohydride （NaBH4） with reduction of Ni^2＋ and Fe^2＋ in aqueous solution. The obtained Ni/Fe particles were characterized by TEM （transmission electron microscope）, XRD （X-ray diffractometer）, and N2-BET. The dechlorination activity of the Ni/Fe was investigated using p-chlorophenol （p-CP） as a probe agent. Results demonstrated that the nanoscale Ni/Fe could effectively dechlorinate p-CP at relatively low metal to solution ratio of 0.4 g/L （Ni 5 wt%）. The target with initial concentration ofp-CP 0.625 mmol/L was dechlorinted completely in 60 rain under ambient temperature and pressure. Factors affecting dechlorination efficiency, including reaction temperature, pH, Ni loading percentage over Fe, and metal to solution ratio, were investigated. The possible mechanism of dechlorination ofp-CP was proposed and discussed. The pseudo-first- order reaction took place on the surface of the Ni/Fe bimetallic particles, and the activation energy of the dechlorination reaction was determined to be 21.2 kJ/mol at the temperature rang of 287-313 K.
文摘Al80Ni6 Y8 Co4 Cu2 amorphous ribbons were isothermally annealed and a mixed structure consisting of α-Al particle with a size of less than 15nm and Al3Ni compound with a size of about 30nm was obtained. The crystallization kinetics of Al80Ni6 Y8 Co4 Cu2 amorphous alloy shows that the precipitation of α-Al particles is the growth process controlled by diffusion of the solute elements rejected from the growing crystals. By quenching at different cooling rates, a mixed structure consisting of nanoscale α-Al particles and the remaining glass matrix or structure consisting of nanoscale particle (Al phase or Al3Ni compound) with a size of about 100nm was formed. The addition of Co elements and Cu elements to Al-Ni-Y alloy systems increases the glass formation ability of the alloy and the thermal stability of the supercooled liquid region against crystallization, which results from significant difference of atomic size, strong bonding nature among constituent elements and the low diffisivity of the solute elements due to the concentration gradient in the growing front of crystals.
基金financially supported by start-up funds from Oregon State UniversityPart of authors’ work using soft X-ray absorption spectroscopy was performed at beamline 6.3.1 of Advanced Light Source, which is an Office of Science User Facility operated for the U.S.DOE Office of Science by Lawrence Berkeley National Laboratory and supported by the DOE under Contract No. DEAC02-05CH11231
文摘Nanoscale electrocatalysts have exhibited promising activity and stability,improving the kinetics of numerous electrochemical reactions in renewable energy systems such as electrolyzers,fuel cells,and metal-air batteries.Due to the size effect,nano particles with extreme small size have high surface areas,complicated morphology,and various surface terminations,which make them different from their bulk phases and often undergo restructuring during the reactions.These restructured materials are hard to probe by conventional ex-situ characterizations,thus leaving the true reaction centers and/or active sites difficult to determine.Nowadays,in situ techniques,particularly X-ray absorption spectroscopy(XAS),have become an important tool to obtain oxidation states,electronic structure,and local bonding environments,which are critical to investigate the electrocatalysts under real reaction conditions.In this review,we go over the basic principles of XAS and highlight recent applications of in situ XAS in studies of nanoscale electrocatalysts.
基金supported by the National Natural Science Foundation of China(No.20807004)the General Research an Development Founding for Universities directly under the Ministry of Education of China(BUCTZZ1202)
文摘Catalytic nickel was successfully incorporated into nanoscale iron to enhance its dechlorination efficiency for trichloroethylene （TCE）, one of the most commonly detected chlorinated organic compounds in groundwater. Ethane was the predominant product. The greatest dechlorination efficiency was achieved at 22 molar percent of nickel. This nanoscale Ni-Fe is poorly ordered and inhomogeneous; iron dissolution occurred whereas nickel was relatively stable during the 24-hr reaction. The morphological characterization provided significant new insights on the mechanism of catalytic hydrodcchlorination by bimetallic nanoparticles. TCE degradation and ethane production rates were greatly affected by environmental parameters such as solution pH, temperature and common groundwater ions. Both rate constants decreased and then increased over the pH range of 6.5 to 8.0, with the minimum value occurring at pH 7.5. TCE degradation rate constant showed an increasing trend over the temperature range of 10 to 25℃. However, ethane production rate constant increased and then decreased over the range, with the maximum value occurring at 20℃, Most salts in the solution appeared to enhance the reaction in the first half hour but overall they displayed an inhibitory effect. Combined ions showed a similar effect as individual salts.
基金supported by grants from Tai Shan Scholar Foundation(No.ts 201511003)
文摘In this study, bimetallic nanoscale zero-valent iron particles（nZVI）, including copper/nanoscale zero-valent iron particles（Cu/nZVI） and nickel/nanoscale zero-valent iron particles（Ni/nZVI）, were synthesized by one-step liquid-phase reduction and applied for oxytetracycline（OTC） removal. The effects of contact time and initial p H on the removal efficiency were studied. The as-prepared nanoscale particles were characterized by scanning electron microscopy（SEM）, energy dispersive spectroscopy（EDS） and X-ray diffraction（XRD）. Finally, the degradation mechanisms of OTC utilizing the as-prepared nanoparticles were investigated by using X-ray photoelectron spectroscopy（XPS） and mass spectrometry（MS）. Cu/n ZVI presented remarkable ability for OTC degradation and removed71.44% of OTC（100 mg/L） in 4 hr, while only 62.34% and 31.05% of OTC was degraded by Ni/nZVI and nZVI respectively. XPS and MS analysis suggested that OTC was broken down to form small molecules by ·OH radicals generated from the corrosion of Fe0. Cu/nZVI and Ni/n ZVI have been proved to have potential as materials for application in OTC removal because of their significant degradation ability toward OTC.
文摘Hydrothermal method was used to synthesize nanoscale particles of MnZn ferrites. The crystallites were characterized by XRD, TEM and SEM. The effects of the reaction time, temperature and additives on the product were investigated. Crystallization process would be carried out above 160 ℃ for 5 h or more, higher temperature can reduce the reaction time. Additives were used to remove impurities such as Fe 2O 3, ZnMnO 3.10～15 nm pure slightly agglomerated MnZn ferrite crystallites with a narrow grain size distribution were obtained.
基金supported by the Major Science and Technology Programs for Water Pollution Control and Management of China (Nos.2011ZX07301-002 and 2012ZX07205-001)
文摘Excess phosphorus from non-point pollution sources is one of the key factors causing eutrophication in many lakes in China,so finding a cost-effective method to remove phosphorus from non-point pollution sources is very important for the health of the aqueous environment. Graphene was selected to support nanoscale zero-valent iron（nZVI）for phosphorus removal from synthetic rainwater runoff in this article. Compared with nZVI supported on other porous materials,graphene-supported nZVI（G-nZVI） could remove phosphorus more efficiently. The amount of nZVI in G-nZVI was an important factor in the removal of phosphorus by G-nZVI,and G-nZVI with 20 wt.% nZVI（20% G-nZVI）could remove phosphorus most efficiently. The nZVI was very stable and could disperse very well on graphene,as characterized by transmission electron microscopy（TEM） and scanning electron microscopy（SEM）. X-ray photoelectron spectroscopy（XPS）,Fourier Transform infrared spectroscopy（FT-IR） and Raman spectroscopy were used to elucidate the reaction process,and the results indicated that Fe-O-P was formed after phosphorus was adsorbed by G-nZVI. The results obtained from X-ray diffraction（XRD） indicated that the reaction product between nZVI supported on graphene and phosphorus was Fe3（PO4）2·8H2O（Vivianite）. It was confirmed that the specific reaction mechanism for the removal of phosphorus with nZVI or G-nZVI was mainly due to chemical reaction between nZVI and phosphorus.
基金financially supported by the National Natural Science Foundation of China (No.51408101)the Key Research and Development (R&D) Program from the Department of Science and Technology of Sichuan Province (No.2018FZ0011).
文摘Sulfide-modified nanoscale zero-valent iron(S-nZVI) is a promising material for removal of organic pollutants from water, but S-nZVI nanoparticles(NPs) easily agglomerate and have poor contact with organic contaminants.Herein, we propose a new S-nZVI/graphene aerogel(S-nZVI/GA) composite which exhibits superior removal capability for trichloroethylene(TCE) from water.Three-dimensional porous graphene aerogel(GA) can improve the efficiency of electron transport, enhance the adsorption of organic pollutants and restrain the agglomeration of the core-shell S-nZVI NPs.The TCE removal rates of Fe S, nZVI, GA and S-nZVI were 27.8%, 42%, 63% and 75% in 2 hr, respectively.Furthermore, TCE was completely removed within 50 min by S-nZVI/GA.The TCE removal rate increased with increasing p H and temperature, and TCE removal followed the pseudo-first-order kinetic model.The results demonstrate the great potential of S-nZVI/GA composite as a low-cost,easily separated and superior monolithic adsorbent for removal of organic pollutants.
基金support provided by the National Key Technology R&D Program(no.2012BAJ21B04)the financial support from the China Scholarship Council(CSC)for one year as a visiting scholar at Stevens Institute of Technology
文摘In this study, a novel nanoscale zero-valent iron（n ZVI） composite material was successfully synthesized using a low-cost natural clay, ＂Hangjin 2~#clay＂（HJ clay） as the support and tested for the decolorization of the azo dye Methyl Orange（MO） in aqueous solution by n ZVI particles. According to the characterization and MO decolorization experiments, the sample with 5：1 HJ clay-supported n ZVI（HJ/n ZVI） mass ratio（HJ-n ZVI5） showed the best dispersion and reactivity and the highest MO decolorization efficiency. With the same equivalent Fe0 dosage, the HJ-n ZVI1 and HJ-n ZVI5 samples demonstrated a synergetic effect for the decolorization of MO： their decolorization efficiencies were much higher than that achieved by physical mixing of HJ clay and n ZVIs, or the sum of HJ clay and n ZVIs alone. The synergetic effect was primarily due to the improved dispersion and more effective utilization of the n ZVI particles on/in the composite materials. Higher decolorization efficiency of MO was obtained at larger HJ-n ZVI dosage, higher temperature and under N2 atmosphere, while the MO initial concentration and p H were negatively correlated to the efficiency. HJ clay not only works as a carrier for n ZVI nanoparticles, but also contributes to the decolorization through an ＂adsorption-enhanced reduction＂ mechanism. The high efficiency of HJ-n ZVI for decontamination gives it great potential for use in a variety of remediation applications.
