This study investigates the anisotropic thermal conductivity of aluminum matrix composites reinforced with graphene nano-plates(GNPs)and in situ ZrB_(2) nanoparticles,while simultaneously maintaining high strength and...This study investigates the anisotropic thermal conductivity of aluminum matrix composites reinforced with graphene nano-plates(GNPs)and in situ ZrB_(2) nanoparticles,while simultaneously maintaining high strength and toughness.A discontinuous layered GNPs-ZrB_(2)/AA6111 composite was prepared using in situ melt reactions and semi-solid stirring casting technology,combined with hot rolling deformation processing.Microstructural analysis revealed that the GNPs were aligned parallel to the rolling direction-transverse direction(RD-TD)plane,whereas the ZrB_(2) nanoparticles aggregated into cluster strips,collectively forming a discontinuous layered structure.This multilayer arrangement maximized the in-plane thermal conductivity of the GNPs.The tightly bonded GNP/Al interfaces with the locking of CuAl_(2) nanoparticles ensured that the GNPs fully exploited their high thermal conductivity.Therefore,the GNPs-ZrB_(2)/AA6111 composite achieved high in-plane thermal conductivity(230 W/(m·K)),which is higher than that of the matrix(206 W/(m·K)).The improved in-plane thermal conductivity is primarily attributed to the exceptionally high intrinsic in-plane thermal conductivity of the GNPs and their two-dimensional layered structure.However,the composite exhibited pronounced thermal conductivity anisotropy in the in-plane and through-plane directions.The reduced through-plane thermal conductivity is predominantly caused by the intrinsically low through-plane thermal conductivity of the GNPs and the increased interfacial thermal resistance from the additional grain boundaries.展开更多
This paper extends the one-dimensional(1D)nonlocal strain gradient integral model(NStraGIM)to the two-dimensional(2D)Kirchhoff axisymmetric nanoplates,based on nonlocal strain gradient integral relations formulated al...This paper extends the one-dimensional(1D)nonlocal strain gradient integral model(NStraGIM)to the two-dimensional(2D)Kirchhoff axisymmetric nanoplates,based on nonlocal strain gradient integral relations formulated along both the radial and circumferential directions.By transforming the proposed integral constitutive equations into the equivalent differential forms,complemented by the corresponding constitutive boundary conditions(CBCs),a well-posed mathematical formulation is established for analyzing the axisymmetric bending and buckling of annular/circular functionally graded(FG)sandwich nanoplates.The boundary conditions at the inner edge of a solid nanoplate are derived by L'H?spital's rule.The numerical solution is obtained by the generalized differential quadrature method(GDQM).The accuracy of the proposed model is validated through comparison with the data from the existing literature.A parameter study is conducted to demonstrate the effects of FG sandwich parameters,size parameters,and nonlocal gradient parameters.展开更多
In this study,we showed that BiO Br nanoplates prepared at different pH values have substratedependent photocatalytic activities under visible-light irradiation. The BiO Br nanoplates synthesized at pH 1（BOB-1） degr...In this study,we showed that BiO Br nanoplates prepared at different pH values have substratedependent photocatalytic activities under visible-light irradiation. The BiO Br nanoplates synthesized at pH 1（BOB-1） degraded salicylic acid more effectively than did those obtained at pH 3（BOB-3）,but the order of their photocatalytic activities in rhodamine B（RhB） degradation were reversed. Electrochemical Mott–Schottky and zeta-potential measurements showed that BOB-1 had a more positive valence band and lower surface charge,leading to superior photocatalytic activity in salicylic acid degradation under visible light. However,BOB-3 was more powerful in RhB degradation because larger numbers of superoxide radicals were generated via electron injection from the excited RhB to its more negative conduction band under visible-light irradiation; this was confirmed using active oxygen species measurements and electron spin resonance analysis. This study deepens our understanding of the origins of organic-pollutant-dependent photoreactivities of semiconductors,and will help in designing highly active photocatalysts for environmental remediation.展开更多
Silver nanoplates,with average thickness about 5 nm and average tunable size from 40 to 500 nm,were synthesized via a simple room-temperature solution-phase chemical reduction method in the presence of appropriate con...Silver nanoplates,with average thickness about 5 nm and average tunable size from 40 to 500 nm,were synthesized via a simple room-temperature solution-phase chemical reduction method in the presence of appropriate concentration of trisodium citrate and silver seeds.The optical in-plane dipole plasmon resonance bands of these silver plates could be tuned from 520 to 1100 nm.Control experiments were explored for understanding of the growth mechanism.It is found that both the amount of citrate ions and the small silver seeds added to the growth solution are the key to controlling the silver nanoplates without changing their thickness and crystal structure.Small silver seeds are found to play an important role in the formation of large thin silver nanoplates when poly（vinylpyrrolidone）（PVP） are used as capping agent.展开更多
The effect of reducing agents and surfactants on controlling the silver nanoplates was studied. Two reducing agents, trisodium citrate dehydrate (TSC) and potassium tartrate, were used to reduce the AgNO3 solution. In...The effect of reducing agents and surfactants on controlling the silver nanoplates was studied. Two reducing agents, trisodium citrate dehydrate (TSC) and potassium tartrate, were used to reduce the AgNO3 solution. In this redox system, polyvinylpyrrolidone (PVP), sodium dodecyl sulfate (SDS) and arabic gum were served as surfactants. The results showed that reducing agents and surfactants both act as the capping agent adhering to the certain facets of silver seeds to block this surface to grow. The relative intensity of reducing agents also takes an active part in influencing the growth rate and direction of silver seeds. It was also found that halides can accelerate the speed of Ostwald ripening by adding Cl?, Br? and I?into the aqueous and have some effects on the morphology of the nanoplates.展开更多
Microstructure and mechanical properties of ADC12 composites reinforced with graphene nanoplates(GNPs)prepared by high-intensity ultrasonic assisted casting were investigated.The results indicated that high-intensity ...Microstructure and mechanical properties of ADC12 composites reinforced with graphene nanoplates(GNPs)prepared by high-intensity ultrasonic assisted casting were investigated.The results indicated that high-intensity ultrasound can promote the uniform distribution of GNPs in the melt,resulting in refining theα(Al)phase and Si phase.The optimal addition of GNPs was 0.9 wt.%,and the optimal ultrasonic time was 12 min.The tensile strength,the yield strength and the hardness of the composite produced under the optimal parameters were 256.8 MPa,210.6 MPa and HV 126.0,respectively,which increased by 30.5%,42.7%,and 34.8%compared with those of the matrix,respectively.After adding the GNPs,the fracture mechanism gradually turned from a brittle fracture to a ductile fracture.The good interface and distribution allowed GNPs to play the role in fine grain strengthening,dislocation strengthening and load transfer strengthening effectively.展开更多
In this paper,we analytically study vibration of functionally graded piezoelectric(FGP)nanoplates based on the nonlocal strain gradient theory.The top and bottom surfaces of the nanoplate are made of PZT-5H and PZT-4,...In this paper,we analytically study vibration of functionally graded piezoelectric(FGP)nanoplates based on the nonlocal strain gradient theory.The top and bottom surfaces of the nanoplate are made of PZT-5H and PZT-4,respectively.We employ Hamilton’s principle and derive the governing differential equations.Then,we use Navier’s solution to obtain the natural frequencies of the FGP nanoplate.In the first step,we compare our results with the obtained results for the piezoelectric nanoplates in the previous studies.In the second step,we neglect the piezoelectric effect and compare our results with those obtained for the functionally graded(FG)nanoplates.Finally,the effects of the FG power index,the nonlocal parameter,the aspect ratio,and the lengthto-thickness ratio,and the nanoplate shape on natural frequencies are investigated.展开更多
A mathematical model for nonlocal vibration and buckling of embedded two-dimensional(2 D) decagonal quasicrystal(QC) layered nanoplates is proposed. The Pasternak-type foundation is used to simulate the interaction be...A mathematical model for nonlocal vibration and buckling of embedded two-dimensional(2 D) decagonal quasicrystal(QC) layered nanoplates is proposed. The Pasternak-type foundation is used to simulate the interaction between the nanoplates and the elastic medium. The exact solutions of the nonlocal vibration frequency and buckling critical load of the 2 D decagonal QC layered nanoplates are obtained by solving the eigensystem and using the propagator matrix method. The present three-dimensional(3 D) exact solution can predict correctly the nature frequencies and critical loads of the nanoplates as compared with previous thin-plate and medium-thick-plate theories.Numerical examples are provided to display the effects of the quasiperiodic direction,length-to-width ratio, thickness of the nanoplates, nonlocal parameter, stacking sequence,and medium elasticity on the vibration frequency and critical buckling load of the 2 D decagonal QC nanoplates. The results show that the effects of the quasiperiodic direction on the vibration frequency and critical buckling load depend on the length-to-width ratio of the nanoplates. The thickness of the nanoplate and the elasticity of the surrounding medium can be adjusted for optimal frequency and critical buckling load of the nanoplate.This feature is useful since the frequency and critical buckling load of the 2 D decagonal QCs as coating materials of plate structures can now be tuned as one desire.展开更多
In this paper, the free vibration of magneto- electro-elastic （MEE） nanoplates is investigated based on the nonlocal theory and Kirchhoff plate theory. The MEE nanoplate is assumed as all edges simply supported rect...In this paper, the free vibration of magneto- electro-elastic （MEE） nanoplates is investigated based on the nonlocal theory and Kirchhoff plate theory. The MEE nanoplate is assumed as all edges simply supported rectan gular plate subjected to the biaxial force, external electric potential, external magnetic potential, and temperature rise. By using the Hamilton＇s principle, the governing equations and boundary conditions are derived and then solved analytically to obtain the natural frequencies of MEE nanoplates. A parametric study is presented to examine the effect of the nonlocal parameter, thermo-magneto-electro-mechanical loadings and aspect ratio on the vibration characteristics of MEE nanoplates. It is found that the natural frequency is quite sensitive to the mechanical loading, electric loading and magnetic loading, while it is insensitive to the thermal loading.展开更多
To synthesize graphene economically and efficiently,as well as to improve the interface bonding between graphene and metal and to recede the aggregation issue of graphene,in this work,an easy and scalable bottom-up st...To synthesize graphene economically and efficiently,as well as to improve the interface bonding between graphene and metal and to recede the aggregation issue of graphene,in this work,an easy and scalable bottom-up strategy for the mass production of metal nanoparticles modified graphene nanoplates(GNPs)was proposed.Cu nanoparticles modified GNPs(Cu-GNPs)and Ni nanoparticles modified GNPs(Ni-GNPs)were fabricated through this method,and then compounded with Al via ball milling technique.The asobtained Ni-GNPs/Al composite showed simultaneously improved strength and toughness compared with unreinforced Al,while the Cu-GNPs/Al composite presented a greater strengthening effect.The microstructure and interface of the two composites were carefully characterized and investigated to reveal the difference.First principle study was also adopted to explore the binding energy of different interface structures.This study could provide new insights into the fabrication of GNPs and the control of interface in GNPs/Al composites.展开更多
The effects of the post-deformation annealing on the microstructural evolution of hot rolled Al7075 matrix composites reinforced with CNTs and GNPs were investigated.The multi-pass hot rolling was applied on the stir ...The effects of the post-deformation annealing on the microstructural evolution of hot rolled Al7075 matrix composites reinforced with CNTs and GNPs were investigated.The multi-pass hot rolling was applied on the stir cast samples.Annealing was then applied to the composites at 450℃ for 4 h.Microstructural evolution was examined by SEM,EDS,and EBSD techniques.EBSD data showed that the addition of 0.87 vol.%(GNPs+CNTs)significantly inhibited the occurrence of recrystallization.Also,in the composite with 0.96 vol.%CNTs,recrystallization was partially inhibited.Whereas,in composites with 0.92 vol.%of GNPs,the occurrence of recrystallization through particle stimulated nucleation(PSN)mechanism was significantly accelerated.The volume fraction of recrystallized grains depends significantly on the occurrence of PSN in the presence of reinforcements.The intensity and type of the main components of the texture as well as the FCC fibers depend on the type of reinforcement.展开更多
A rotating axisymmetric circular nanoplate is modeled by the Mindlin plate theory.The Mindlin plate theory incorporates the nonlocal scale and strain gradient effects.The shear deformation of the circular nanoplate is...A rotating axisymmetric circular nanoplate is modeled by the Mindlin plate theory.The Mindlin plate theory incorporates the nonlocal scale and strain gradient effects.The shear deformation of the circular nanoplate is considered and the nonlocal strain gradient theory is utilized to derive the governing differential equation of motion that describes the out-of-plane free vibration behaviors of the nanoplate.The differential quadrature method is used to solve the governing equation numerically,and the natural frequencies of the out-of-plane vibration of rotating nanoplates are obtained accordingly.Two kinds of boundary conditions are commonly used in practical engineering,namely the fixed and simply supported constraints,and are considered in numerical examples.The variations of natural frequencies with respect to the thickness to radius ratio,the angular velocity,the nonlocal characteristic scale and the material characteristic scale are analyzed in detail.In particular,the critical angular velocity that measures whether the rotating circular nanoplate is stable or not is obtained numerically.The presented study has reference significance for the dynamic design and control of rotating circular nanostructures in current nano-technologies and nano-devices.展开更多
Αn analytical method is developed to explore the wave propagation characteristics of piezoelectric sandwich nanoplates in the present work.The sandwich nanoplates are composed of a graphene reinforced composite core ...Αn analytical method is developed to explore the wave propagation characteristics of piezoelectric sandwich nanoplates in the present work.The sandwich nanoplates are composed of a graphene reinforced composite core layer with two piezoelectric surface layers exposed to electric field.The material properties of the nanocomposite layer are given by the Halpin–Tsai model and mixture’s rule.The Euler–Lagrange equation of the nanoplates is obtained by Hamilton's principle and first-order shear deformation theory.Then,combining the high-order nonlocal strain gradient theory with the hygrothermal constitutive relationship of composite nanoplates,the nonlocal governing equations are presented.Finally,numerical studies are conducted to demonstrate the influences of scale parameters,applied external voltage,temperature variation,moisture variation,graphene size,and weight fraction on wave frequency.The results reveal that low-order and high-order nonlocal parameters and length scale parameters have different effects on wave frequency.The wave frequency can be reduced by increasing temperature and the thickness of graphene.This could facilitate the investigation of the dynamic properties of graphene nanocomposite structures.展开更多
As a two dimensional(2D)visible‐light‐responsive semiconductor photocatalyst,the photoreactivity of Bi2WO6 is not high enough for practical application owing to its limited response to visible light and rapid recomb...As a two dimensional(2D)visible‐light‐responsive semiconductor photocatalyst,the photoreactivity of Bi2WO6 is not high enough for practical application owing to its limited response to visible light and rapid recombination of photogenerated electron‐hole pairs.In this paper,2D core‐shell structured Bi2WO6@Bi2S3 nanoplates were prepared by calcination of a mixture of Bi2WO6(1.3 g)and a certain amount of Na2S·9H2O(0–3.0 g)at 350°C for 2 h.The reactivity of the resulting photocatalyst materials was evaluated by photocatalytic degradation of Brilliant Red X‐3B(X3B),an anionic dye,under visible light irradiation(?>420 nm).As the amount of Na2S·9H2O was increased from 0 to 1.5 g,the degradation rate constant of X3B sharply increased from 0.40×10?3 to 6.6×10?3 min?1.The enhanced photocatalytic activity of Bi2WO6@Bi2S3 was attributed to the photosensitization of Bi2S3,which greatly extended the light‐responsive range from the visible to the NIR,and the formation of a heterojunction,which retarded the recombination rate of photogenerated electron‐hole pairs.However,further increases in the amount of Na2S·9H2O(from 1.5 to 3.0 g)resulted in a decrease of the photocatalytic activity of the Bi2WO6@Bi2S3 nanoplates owing to the formation of a photo‐inactive NaBiS2 layer covering the Bi2WO6 surface.展开更多
In this work,a series of BiOBr nanoplates with oxygen vacancies(OVs)were synthesized by a solvothermal method using a water/ethylene glycol solution.The number of OVs and facets of BiOBr were tuned by changing the wat...In this work,a series of BiOBr nanoplates with oxygen vacancies(OVs)were synthesized by a solvothermal method using a water/ethylene glycol solution.The number of OVs and facets of BiOBr were tuned by changing the water/ethylene glycol ratio.Although the role of OVs in photocatalysis has been investigated,the underlying mechanisms of charge transfer and reactant activation remain unknown.To unravel the effect of OVs on the reactant activation and photocatalytic NO oxidation process,in situ diffuse reflectance infrared Fourier transform spectroscopy,so‐called DRIFTS,and theoretical calculations were performed and their results combined.The photocatalytic efficiency of the as‐prepared BiOBr was significantly increased by increasing the amount of OVs.The oxygen vacancies had several effects on the photocatalysts,including the introduction of intermediate energy levels that enhanced light absorption,promoted electron transfer,acted as active sites for catalytic reaction and the activation of oxygen molecules,and facilitated the conversion of the intermediate products to the final product,thus increasing the overall visible light photocatalysis efficiency.The present work provides new insights into the understanding of the role of OVs in photocatalysts and the mechanism of photocatalytic NO oxidation.展开更多
Non-layered two-dimensional(2D) lead-free all-inorganic perovskites nanoplates have recently attracted considerable attention in photodetectors;however, the indepth investigation of thickness on photodetection perform...Non-layered two-dimensional(2D) lead-free all-inorganic perovskites nanoplates have recently attracted considerable attention in photodetectors;however, the indepth investigation of thickness on photodetection performance is still lacking. In this work, by constructing the famous metal-semiconductor-metal photodetectors, the photodetection behaviors of thickness-controlled CsSnBr;nanoplates are investigated systematically. Ni electrodes are adopted for ensuring the good ohmic contact behaviors of as-fabricated photodetectors. With the increase in thickness, the photodetection performances improve accordingly, such as photocurrent increases from 0.22 to 19.40 nA, responsivity increases from 72.9 to 4893.7 mA·W^(-1), rise/decay time decreases from 11/35 to 3/10 ms, respectively. Notability, the dark current also increases with the increase in thickness, making the further investigation on the reduction in dark current meaningful.All of the as-fabricated photodetectors are stable, suggesting the careful thickness selection in next-generation high-performance lead-free all-inorganic perovskites photodetectors.展开更多
SrMoO4 nanoplates were synthesized by a facile reverse microemulsion method at room temperature.Energy evolution of this in situ growth process was monitored by means of a microcalorimeter.A sharp exothermic peak for ...SrMoO4 nanoplates were synthesized by a facile reverse microemulsion method at room temperature.Energy evolution of this in situ growth process was monitored by means of a microcalorimeter.A sharp exothermic peak for the initial reaction and two discontinuous relatively weak exothermic peaks for the subsequent crystal growth emerged on the microcalorimetric heat flow curve.Based on the in situ thermokinetic data,the rate constants of the nucleation process and crystallization process at 298.15 K were calculated to be 4.078×10-3 and 5.033×10-4 s-1,respectively.The growth mechanism and energy evolution were investigated.展开更多
The modified couple stress theory has been applied in many nanomaterials except for nano-quasicrystals.In this paper,the modified couple stress theory is firstly adopted to analyze the static bending deformation of mu...The modified couple stress theory has been applied in many nanomaterials except for nano-quasicrystals.In this paper,the modified couple stress theory is firstly adopted to analyze the static bending deformation of multilayered one-dimensional(ID)hexagonal quasicrystal(QC)nanoplates under surface loadings.The general solutions for the extended displacement and traction vectors in a simply supported and homogeneous QC nanoplate are derived by solving an eigenvalue problem reduced from the governing equations.Utilizing the propagator matrix method,the analytical solutions of multilayered ID QC nanoplates are then obtained by assuming that the layer interfaces are continuous.Numerical examples for some kinds of nanoplates made up of QC and crystal(BaTiOa)are provided to illustrate the effects of the material length parameter,the number of layers and the stacking sequence of nanoplates on the phonon and phason fields,which is helpful for the application of QCs to surface coating and solar energy selective absorber.展开更多
Due to the serious harm of diabetes to human health,development of sensitive assays for glucose level is of high significance for early prevention and treatment of diabetes.Currently,most conventional enzyme-based glu...Due to the serious harm of diabetes to human health,development of sensitive assays for glucose level is of high significance for early prevention and treatment of diabetes.Currently,most conventional enzyme-based glucose sensors suffer from high cost and low stability due to the inherent defects of natural enzymes.Herein,we develop a pure nanozyme-based glucose detection method using Ag@Au core/shell triangular nanoplates(TNPs),which combines glucose oxidase(GOD)-and horseradish peroxidase(HRP)-like activities of the Au shell and inherent plasmonic properties of Ag TNPs.The sensing mechanism is based on the fact that the Au shell possessed GOD-like activity,enabling the oxidation of glucose to produce H2O2,which can further etch the silver core,leading to the decrease of absorbance at 800 nm and the color change from blue to colorless.Compared with the previous nanozymes-based glucose sensors,our method avoids the use of enzymes and organic chromogenic agent.Moreover,the stability of the Ag@Au core/shell TNPs is much better than that of Ag TNPs due to the protection by the coating of the Au shell.This method was successfully applied to the detection of urine samples from patients with diabetes,indicating its practical applicability for real sample analysis.展开更多
This paper attempts to investigate the buckling and post-buckling behaviors of piezoelectric nanoplate based on the nonlocal Mindlin plate model and yon Karman geometric nonlinearity. An external electric voltage and ...This paper attempts to investigate the buckling and post-buckling behaviors of piezoelectric nanoplate based on the nonlocal Mindlin plate model and yon Karman geometric nonlinearity. An external electric voltage and a uniform temperature rise are applied on the piezoelectric nanoplate. Both the uniaxial and biaxial mechanical compression forces will be considered in the buckling and post-buckling analysis. By substituting the energy functions into the equation of the minimum total potential energy principle, the governing equations are derived directly, and then discretized through the differential quadrature （DQ） method. The buckling and post-buckling responses of piezoelectric nanoplates are calculated by employing a direct iterative method under different boundary conditions. The numerical results are presented to show the influences of different factors including the nonlocal parameter, electric voltage, and temperature rise on the buckling and post-buckling responses.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52471156,U20A20274,and 52071158)the China Postdoctoral Science Foundation(Nos.2024M751173 and 2024M752703)+1 种基金the Jiangsu Funding Program for Excellent Postdoctoral Talent,China(No.2024ZB229)the Natural Science Foundation of Jiangsu Higher Education Institutions,China(No.24KJB430012).
文摘This study investigates the anisotropic thermal conductivity of aluminum matrix composites reinforced with graphene nano-plates(GNPs)and in situ ZrB_(2) nanoparticles,while simultaneously maintaining high strength and toughness.A discontinuous layered GNPs-ZrB_(2)/AA6111 composite was prepared using in situ melt reactions and semi-solid stirring casting technology,combined with hot rolling deformation processing.Microstructural analysis revealed that the GNPs were aligned parallel to the rolling direction-transverse direction(RD-TD)plane,whereas the ZrB_(2) nanoparticles aggregated into cluster strips,collectively forming a discontinuous layered structure.This multilayer arrangement maximized the in-plane thermal conductivity of the GNPs.The tightly bonded GNP/Al interfaces with the locking of CuAl_(2) nanoparticles ensured that the GNPs fully exploited their high thermal conductivity.Therefore,the GNPs-ZrB_(2)/AA6111 composite achieved high in-plane thermal conductivity(230 W/(m·K)),which is higher than that of the matrix(206 W/(m·K)).The improved in-plane thermal conductivity is primarily attributed to the exceptionally high intrinsic in-plane thermal conductivity of the GNPs and their two-dimensional layered structure.However,the composite exhibited pronounced thermal conductivity anisotropy in the in-plane and through-plane directions.The reduced through-plane thermal conductivity is predominantly caused by the intrinsically low through-plane thermal conductivity of the GNPs and the increased interfacial thermal resistance from the additional grain boundaries.
基金Project supported by the National Natural Science Foundation of China(No.12172169)the Priority Academic Program Development of Jiangsu Higher Education Institutions。
文摘This paper extends the one-dimensional(1D)nonlocal strain gradient integral model(NStraGIM)to the two-dimensional(2D)Kirchhoff axisymmetric nanoplates,based on nonlocal strain gradient integral relations formulated along both the radial and circumferential directions.By transforming the proposed integral constitutive equations into the equivalent differential forms,complemented by the corresponding constitutive boundary conditions(CBCs),a well-posed mathematical formulation is established for analyzing the axisymmetric bending and buckling of annular/circular functionally graded(FG)sandwich nanoplates.The boundary conditions at the inner edge of a solid nanoplate are derived by L'H?spital's rule.The numerical solution is obtained by the generalized differential quadrature method(GDQM).The accuracy of the proposed model is validated through comparison with the data from the existing literature.A parameter study is conducted to demonstrate the effects of FG sandwich parameters,size parameters,and nonlocal gradient parameters.
基金supported by the National Natural Science Funds for Distinguished Young Scholars(21425728)the National Natural Science Foundation of China(21173093+4 种基金211770482127308821477044)the Key Project of Natural Science Foundation of Hubei Province(2013CFA114)the the Fundamental Research Funds for the Central Universities(CCNU14Z01001 CCNU14KFY002)~~
文摘In this study,we showed that BiO Br nanoplates prepared at different pH values have substratedependent photocatalytic activities under visible-light irradiation. The BiO Br nanoplates synthesized at pH 1（BOB-1） degraded salicylic acid more effectively than did those obtained at pH 3（BOB-3）,but the order of their photocatalytic activities in rhodamine B（RhB） degradation were reversed. Electrochemical Mott–Schottky and zeta-potential measurements showed that BOB-1 had a more positive valence band and lower surface charge,leading to superior photocatalytic activity in salicylic acid degradation under visible light. However,BOB-3 was more powerful in RhB degradation because larger numbers of superoxide radicals were generated via electron injection from the excited RhB to its more negative conduction band under visible-light irradiation; this was confirmed using active oxygen species measurements and electron spin resonance analysis. This study deepens our understanding of the origins of organic-pollutant-dependent photoreactivities of semiconductors,and will help in designing highly active photocatalysts for environmental remediation.
基金Project (10804101) supported by the National Nature Science Foundation of ChinaProject (2007CB815102) supported by the National Basic Research Program of ChinaProject (2007B08007) supported by the Science and Technology Development Foundation of Chinese Academy of Engineering Physics
文摘Silver nanoplates,with average thickness about 5 nm and average tunable size from 40 to 500 nm,were synthesized via a simple room-temperature solution-phase chemical reduction method in the presence of appropriate concentration of trisodium citrate and silver seeds.The optical in-plane dipole plasmon resonance bands of these silver plates could be tuned from 520 to 1100 nm.Control experiments were explored for understanding of the growth mechanism.It is found that both the amount of citrate ions and the small silver seeds added to the growth solution are the key to controlling the silver nanoplates without changing their thickness and crystal structure.Small silver seeds are found to play an important role in the formation of large thin silver nanoplates when poly（vinylpyrrolidone）（PVP） are used as capping agent.
基金Project(51373097)supported by The National Natural Science Foundation of China
文摘The effect of reducing agents and surfactants on controlling the silver nanoplates was studied. Two reducing agents, trisodium citrate dehydrate (TSC) and potassium tartrate, were used to reduce the AgNO3 solution. In this redox system, polyvinylpyrrolidone (PVP), sodium dodecyl sulfate (SDS) and arabic gum were served as surfactants. The results showed that reducing agents and surfactants both act as the capping agent adhering to the certain facets of silver seeds to block this surface to grow. The relative intensity of reducing agents also takes an active part in influencing the growth rate and direction of silver seeds. It was also found that halides can accelerate the speed of Ostwald ripening by adding Cl?, Br? and I?into the aqueous and have some effects on the morphology of the nanoplates.
基金Project(51965040)supported by the National Natural Science Foundation of ChinaProject(20181BAB206026)supported by the Natural Science Foundation of Jiangxi Province,China。
文摘Microstructure and mechanical properties of ADC12 composites reinforced with graphene nanoplates(GNPs)prepared by high-intensity ultrasonic assisted casting were investigated.The results indicated that high-intensity ultrasound can promote the uniform distribution of GNPs in the melt,resulting in refining theα(Al)phase and Si phase.The optimal addition of GNPs was 0.9 wt.%,and the optimal ultrasonic time was 12 min.The tensile strength,the yield strength and the hardness of the composite produced under the optimal parameters were 256.8 MPa,210.6 MPa and HV 126.0,respectively,which increased by 30.5%,42.7%,and 34.8%compared with those of the matrix,respectively.After adding the GNPs,the fracture mechanism gradually turned from a brittle fracture to a ductile fracture.The good interface and distribution allowed GNPs to play the role in fine grain strengthening,dislocation strengthening and load transfer strengthening effectively.
文摘In this paper,we analytically study vibration of functionally graded piezoelectric(FGP)nanoplates based on the nonlocal strain gradient theory.The top and bottom surfaces of the nanoplate are made of PZT-5H and PZT-4,respectively.We employ Hamilton’s principle and derive the governing differential equations.Then,we use Navier’s solution to obtain the natural frequencies of the FGP nanoplate.In the first step,we compare our results with the obtained results for the piezoelectric nanoplates in the previous studies.In the second step,we neglect the piezoelectric effect and compare our results with those obtained for the functionally graded(FG)nanoplates.Finally,the effects of the FG power index,the nonlocal parameter,the aspect ratio,and the lengthto-thickness ratio,and the nanoplate shape on natural frequencies are investigated.
基金the National Natural Science Foundation of China(Nos.12072166 and 11862021)the Program for Science and Technology of Inner Mongolia Autonomous Region of China(No.2021GG0254)the Natural Science Foundation of Inner Mongolia Autonomous Region of China(No.2020MS01006)。
文摘A mathematical model for nonlocal vibration and buckling of embedded two-dimensional(2 D) decagonal quasicrystal(QC) layered nanoplates is proposed. The Pasternak-type foundation is used to simulate the interaction between the nanoplates and the elastic medium. The exact solutions of the nonlocal vibration frequency and buckling critical load of the 2 D decagonal QC layered nanoplates are obtained by solving the eigensystem and using the propagator matrix method. The present three-dimensional(3 D) exact solution can predict correctly the nature frequencies and critical loads of the nanoplates as compared with previous thin-plate and medium-thick-plate theories.Numerical examples are provided to display the effects of the quasiperiodic direction,length-to-width ratio, thickness of the nanoplates, nonlocal parameter, stacking sequence,and medium elasticity on the vibration frequency and critical buckling load of the 2 D decagonal QC nanoplates. The results show that the effects of the quasiperiodic direction on the vibration frequency and critical buckling load depend on the length-to-width ratio of the nanoplates. The thickness of the nanoplate and the elasticity of the surrounding medium can be adjusted for optimal frequency and critical buckling load of the nanoplate.This feature is useful since the frequency and critical buckling load of the 2 D decagonal QCs as coating materials of plate structures can now be tuned as one desire.
基金supported by the Australian Research Council (DP130104358)Fundamental Research Funds for the Central Universities under Grant number 2013JBM009+1 种基金Program for New Century Excellent Talents in University under Grant number NCET-13-0656Beijing Higher Education Young Elite Teacher Project under Grant number YETP0562
文摘In this paper, the free vibration of magneto- electro-elastic （MEE） nanoplates is investigated based on the nonlocal theory and Kirchhoff plate theory. The MEE nanoplate is assumed as all edges simply supported rectan gular plate subjected to the biaxial force, external electric potential, external magnetic potential, and temperature rise. By using the Hamilton＇s principle, the governing equations and boundary conditions are derived and then solved analytically to obtain the natural frequencies of MEE nanoplates. A parametric study is presented to examine the effect of the nonlocal parameter, thermo-magneto-electro-mechanical loadings and aspect ratio on the vibration characteristics of MEE nanoplates. It is found that the natural frequency is quite sensitive to the mechanical loading, electric loading and magnetic loading, while it is insensitive to the thermal loading.
基金the National Natural Science Foundation of China(Grant Nos.51771130,51531004,and 51422104)the Tianjin youth talent support program+1 种基金the Tianjin Natural Science Funds for Distinguished Young(Grant No.17JCJQJC44300)the Tianjin Science and Technology Support Project(Grant No.17ZXCLGX00060)。
文摘To synthesize graphene economically and efficiently,as well as to improve the interface bonding between graphene and metal and to recede the aggregation issue of graphene,in this work,an easy and scalable bottom-up strategy for the mass production of metal nanoparticles modified graphene nanoplates(GNPs)was proposed.Cu nanoparticles modified GNPs(Cu-GNPs)and Ni nanoparticles modified GNPs(Ni-GNPs)were fabricated through this method,and then compounded with Al via ball milling technique.The asobtained Ni-GNPs/Al composite showed simultaneously improved strength and toughness compared with unreinforced Al,while the Cu-GNPs/Al composite presented a greater strengthening effect.The microstructure and interface of the two composites were carefully characterized and investigated to reveal the difference.First principle study was also adopted to explore the binding energy of different interface structures.This study could provide new insights into the fabrication of GNPs and the control of interface in GNPs/Al composites.
基金the Sahand University of Technology and Ghent University for the support of this research。
文摘The effects of the post-deformation annealing on the microstructural evolution of hot rolled Al7075 matrix composites reinforced with CNTs and GNPs were investigated.The multi-pass hot rolling was applied on the stir cast samples.Annealing was then applied to the composites at 450℃ for 4 h.Microstructural evolution was examined by SEM,EDS,and EBSD techniques.EBSD data showed that the addition of 0.87 vol.%(GNPs+CNTs)significantly inhibited the occurrence of recrystallization.Also,in the composite with 0.96 vol.%CNTs,recrystallization was partially inhibited.Whereas,in composites with 0.92 vol.%of GNPs,the occurrence of recrystallization through particle stimulated nucleation(PSN)mechanism was significantly accelerated.The volume fraction of recrystallized grains depends significantly on the occurrence of PSN in the presence of reinforcements.The intensity and type of the main components of the texture as well as the FCC fibers depend on the type of reinforcement.
基金supported by the Natural Science Foundation of China(No.11972240)the China Postdoctoral Science Foundation(No.2020M671574)the University Natural Science Research Project of Anhui Province(No.KJ2018A0481).
文摘A rotating axisymmetric circular nanoplate is modeled by the Mindlin plate theory.The Mindlin plate theory incorporates the nonlocal scale and strain gradient effects.The shear deformation of the circular nanoplate is considered and the nonlocal strain gradient theory is utilized to derive the governing differential equation of motion that describes the out-of-plane free vibration behaviors of the nanoplate.The differential quadrature method is used to solve the governing equation numerically,and the natural frequencies of the out-of-plane vibration of rotating nanoplates are obtained accordingly.Two kinds of boundary conditions are commonly used in practical engineering,namely the fixed and simply supported constraints,and are considered in numerical examples.The variations of natural frequencies with respect to the thickness to radius ratio,the angular velocity,the nonlocal characteristic scale and the material characteristic scale are analyzed in detail.In particular,the critical angular velocity that measures whether the rotating circular nanoplate is stable or not is obtained numerically.The presented study has reference significance for the dynamic design and control of rotating circular nanostructures in current nano-technologies and nano-devices.
基金This work was supported in part by the National Natural Science Foundation of China(Grants 11502218,11672252,and 11602204)the Fundamental Research Funds for the Central Universities of China(Grant 2682020ZT106).
文摘Αn analytical method is developed to explore the wave propagation characteristics of piezoelectric sandwich nanoplates in the present work.The sandwich nanoplates are composed of a graphene reinforced composite core layer with two piezoelectric surface layers exposed to electric field.The material properties of the nanocomposite layer are given by the Halpin–Tsai model and mixture’s rule.The Euler–Lagrange equation of the nanoplates is obtained by Hamilton's principle and first-order shear deformation theory.Then,combining the high-order nonlocal strain gradient theory with the hygrothermal constitutive relationship of composite nanoplates,the nonlocal governing equations are presented.Finally,numerical studies are conducted to demonstrate the influences of scale parameters,applied external voltage,temperature variation,moisture variation,graphene size,and weight fraction on wave frequency.The results reveal that low-order and high-order nonlocal parameters and length scale parameters have different effects on wave frequency.The wave frequency can be reduced by increasing temperature and the thickness of graphene.This could facilitate the investigation of the dynamic properties of graphene nanocomposite structures.
基金supported by the National Natural Science Foundation of China(51672312,21571192,21373275)the Science and Technology Program of Wuhan(2016010101010018,2015070504020220)+1 种基金the Key Project in the National Science&Technology Pillar Program during the Twelfth Five-Year Plan Period(2015BAB01B01)the Natural Science Foundation of South-Central University for Nationalities(XTZ15016,CZP17062)~~
文摘As a two dimensional(2D)visible‐light‐responsive semiconductor photocatalyst,the photoreactivity of Bi2WO6 is not high enough for practical application owing to its limited response to visible light and rapid recombination of photogenerated electron‐hole pairs.In this paper,2D core‐shell structured Bi2WO6@Bi2S3 nanoplates were prepared by calcination of a mixture of Bi2WO6(1.3 g)and a certain amount of Na2S·9H2O(0–3.0 g)at 350°C for 2 h.The reactivity of the resulting photocatalyst materials was evaluated by photocatalytic degradation of Brilliant Red X‐3B(X3B),an anionic dye,under visible light irradiation(?>420 nm).As the amount of Na2S·9H2O was increased from 0 to 1.5 g,the degradation rate constant of X3B sharply increased from 0.40×10?3 to 6.6×10?3 min?1.The enhanced photocatalytic activity of Bi2WO6@Bi2S3 was attributed to the photosensitization of Bi2S3,which greatly extended the light‐responsive range from the visible to the NIR,and the formation of a heterojunction,which retarded the recombination rate of photogenerated electron‐hole pairs.However,further increases in the amount of Na2S·9H2O(from 1.5 to 3.0 g)resulted in a decrease of the photocatalytic activity of the Bi2WO6@Bi2S3 nanoplates owing to the formation of a photo‐inactive NaBiS2 layer covering the Bi2WO6 surface.
文摘In this work,a series of BiOBr nanoplates with oxygen vacancies(OVs)were synthesized by a solvothermal method using a water/ethylene glycol solution.The number of OVs and facets of BiOBr were tuned by changing the water/ethylene glycol ratio.Although the role of OVs in photocatalysis has been investigated,the underlying mechanisms of charge transfer and reactant activation remain unknown.To unravel the effect of OVs on the reactant activation and photocatalytic NO oxidation process,in situ diffuse reflectance infrared Fourier transform spectroscopy,so‐called DRIFTS,and theoretical calculations were performed and their results combined.The photocatalytic efficiency of the as‐prepared BiOBr was significantly increased by increasing the amount of OVs.The oxygen vacancies had several effects on the photocatalysts,including the introduction of intermediate energy levels that enhanced light absorption,promoted electron transfer,acted as active sites for catalytic reaction and the activation of oxygen molecules,and facilitated the conversion of the intermediate products to the final product,thus increasing the overall visible light photocatalysis efficiency.The present work provides new insights into the understanding of the role of OVs in photocatalysts and the mechanism of photocatalytic NO oxidation.
基金the National Key R&D Program of China(No.2017YFA0305500)the National Natural Science Foundation of China(Nos.61904096 and 62104133)+3 种基金Taishan Scholars Program of Shandong Province(No.tsqn201812006)Shandong University Youth Innovation Supporting Program(No.2019KJN020)Shandong University Multidisciplinary Research and Innovation Team of Young Scholars(No.2020QNQT015)‘‘Outstanding Youth Scholar and Qilu Young Scholar’’programs of Shandong University。
文摘Non-layered two-dimensional(2D) lead-free all-inorganic perovskites nanoplates have recently attracted considerable attention in photodetectors;however, the indepth investigation of thickness on photodetection performance is still lacking. In this work, by constructing the famous metal-semiconductor-metal photodetectors, the photodetection behaviors of thickness-controlled CsSnBr;nanoplates are investigated systematically. Ni electrodes are adopted for ensuring the good ohmic contact behaviors of as-fabricated photodetectors. With the increase in thickness, the photodetection performances improve accordingly, such as photocurrent increases from 0.22 to 19.40 nA, responsivity increases from 72.9 to 4893.7 mA·W^(-1), rise/decay time decreases from 11/35 to 3/10 ms, respectively. Notability, the dark current also increases with the increase in thickness, making the further investigation on the reduction in dark current meaningful.All of the as-fabricated photodetectors are stable, suggesting the careful thickness selection in next-generation high-performance lead-free all-inorganic perovskites photodetectors.
基金Supported by the National Natural Science Foundation of China(No.20963001)the Major Project of Natural Science Foundation of Guangxi Province,China(No.0991001Z)
文摘SrMoO4 nanoplates were synthesized by a facile reverse microemulsion method at room temperature.Energy evolution of this in situ growth process was monitored by means of a microcalorimeter.A sharp exothermic peak for the initial reaction and two discontinuous relatively weak exothermic peaks for the subsequent crystal growth emerged on the microcalorimetric heat flow curve.Based on the in situ thermokinetic data,the rate constants of the nucleation process and crystallization process at 298.15 K were calculated to be 4.078×10-3 and 5.033×10-4 s-1,respectively.The growth mechanism and energy evolution were investigated.
基金supported by the National Natural Science Foundation of China(Grant Nos.11862021,11502123,and 11262012)Program for Young Talents of Science and Technology in Universities of Inner Mongolia Autonomous Region(NJYT-19-A06)the Natural Science Foundation of Inner Mongolia Autonomous Region of China(Grant No.2015JQ01).
文摘The modified couple stress theory has been applied in many nanomaterials except for nano-quasicrystals.In this paper,the modified couple stress theory is firstly adopted to analyze the static bending deformation of multilayered one-dimensional(ID)hexagonal quasicrystal(QC)nanoplates under surface loadings.The general solutions for the extended displacement and traction vectors in a simply supported and homogeneous QC nanoplate are derived by solving an eigenvalue problem reduced from the governing equations.Utilizing the propagator matrix method,the analytical solutions of multilayered ID QC nanoplates are then obtained by assuming that the layer interfaces are continuous.Numerical examples for some kinds of nanoplates made up of QC and crystal(BaTiOa)are provided to illustrate the effects of the material length parameter,the number of layers and the stacking sequence of nanoplates on the phonon and phason fields,which is helpful for the application of QCs to surface coating and solar energy selective absorber.
基金supported by the National Natural Science Foundation of China(No.21876206)the Fundamental Research Funds for the Central Universities(No.18CX02037A)。
文摘Due to the serious harm of diabetes to human health,development of sensitive assays for glucose level is of high significance for early prevention and treatment of diabetes.Currently,most conventional enzyme-based glucose sensors suffer from high cost and low stability due to the inherent defects of natural enzymes.Herein,we develop a pure nanozyme-based glucose detection method using Ag@Au core/shell triangular nanoplates(TNPs),which combines glucose oxidase(GOD)-and horseradish peroxidase(HRP)-like activities of the Au shell and inherent plasmonic properties of Ag TNPs.The sensing mechanism is based on the fact that the Au shell possessed GOD-like activity,enabling the oxidation of glucose to produce H2O2,which can further etch the silver core,leading to the decrease of absorbance at 800 nm and the color change from blue to colorless.Compared with the previous nanozymes-based glucose sensors,our method avoids the use of enzymes and organic chromogenic agent.Moreover,the stability of the Ag@Au core/shell TNPs is much better than that of Ag TNPs due to the protection by the coating of the Au shell.This method was successfully applied to the detection of urine samples from patients with diabetes,indicating its practical applicability for real sample analysis.
基金supported by the National Natural Science Foundation of China (11272040 and 11322218)
文摘This paper attempts to investigate the buckling and post-buckling behaviors of piezoelectric nanoplate based on the nonlocal Mindlin plate model and yon Karman geometric nonlinearity. An external electric voltage and a uniform temperature rise are applied on the piezoelectric nanoplate. Both the uniaxial and biaxial mechanical compression forces will be considered in the buckling and post-buckling analysis. By substituting the energy functions into the equation of the minimum total potential energy principle, the governing equations are derived directly, and then discretized through the differential quadrature （DQ） method. The buckling and post-buckling responses of piezoelectric nanoplates are calculated by employing a direct iterative method under different boundary conditions. The numerical results are presented to show the influences of different factors including the nonlocal parameter, electric voltage, and temperature rise on the buckling and post-buckling responses.
