Due to its ability to convert body heat into electricity,organic thermoelectric material is considered a promising and smart maintenance-free power source to charge wearable electronics.However,developing flexible n-t...Due to its ability to convert body heat into electricity,organic thermoelectric material is considered a promising and smart maintenance-free power source to charge wearable electronics.However,developing flexible n-type organic thermoelectric materials and wearable p/n junction thermoelectric devices remains challenging.In this work,two insulated polyamides(PA6 and PA66)that have been widely used as fiber materials are employed as novel dopants for converting p-type single-walled carbon nanotubes(SWCNTs)to n-type thermoelectric materials.Because of the electron transferability of the amide group,polyamide-doped SWCNTs exhibit excellent thermopower values as large as-56.0μV K^(-1) for PA66,and-54.5μV K^(-1) for PA6.Thermoelectric devices with five p/n junctions connected in series are fabricated.The testing device produces a thermoelectric voltage of 43.1 mV and generates 1.85μW thermoelectric power under temperature gradients of approximately 80 K.Furthermore,they display charming capability for temperature recognition and monitoring human activities as sensors.These promising results suggest that the flexible polyamide-doped SWCNT composites herein have high application potential as wearable thermoelectric electronics.展开更多
Regioselevtive functionalization of perylene diimides(PDIs)at bay area often requires multistep synthesis and strenuous recrystallization.Direct bromination of perylene diimides only afford the 1,6 and 1,7-regioisomer...Regioselevtive functionalization of perylene diimides(PDIs)at bay area often requires multistep synthesis and strenuous recrystallization.Direct bromination of perylene diimides only afford the 1,6 and 1,7-regioisomers.More importantly,the 1,6-dibromo regioisomers could only be separated by preparative HPLC.Herein,we report a promising strategy for constructing Janus backbone of BN-doped perylene diimide derivatives.This Janus-type configuration results in the unique regioselective functionalization of BN-JPDIs,which yields exclusively the 1,6-regioisomers.Further investigation shows that the Janus-type configuration leads to a net dipole moment of 1.94 D and intramolecular charge transfer,which causes substantial changes on the optoelectronic properties.Moreover,the single crystal organic field-effect transistors based on BN-JPDIs exhibit electron mobilities up to 0.57 cm^(2)V^(-1)s^(-1),showcasing their potential as versatile building block towards high-performance n-type organic semiconductors.展开更多
Doped two-dimensional(2D)materials hold significant promise for advancing many technologies,such as microelectronics,optoelectronics,and energy storage.Herein,n-type 2D oxidized Si nanosheets,namely n-type siloxene(n-...Doped two-dimensional(2D)materials hold significant promise for advancing many technologies,such as microelectronics,optoelectronics,and energy storage.Herein,n-type 2D oxidized Si nanosheets,namely n-type siloxene(n-SX),are employed as Li-ion battery anodes.Via thermal evaporation of sodium hypophosphite at 275℃,P atoms are effectively incorporated into siloxene(SX)without compromising its 2D layered morphology and unique Kautsky-type crystal structure.Further,selective nucleophilic substitution occurs,with only Si atoms being replaced by P atoms in the O_(3)≡Si-H tetrahedra.The resulting n-SX possesses two delocalized electrons arising from the presence of two electron donor types:(i)P atoms residing in Si sites and(ii)H vacancies.The doping concentrations are varied by controlling the amount of precursors or their mean free paths.Even at 2000 mA g^(-1),the n-SX electrode with the optimized doping concentration(6.7×10^(19) atoms cm^(-3))delivers a capacity of 594 mAh g^(-1) with a 73%capacity retention after 500 cycles.These improvements originate from the enhanced kinetics of charge transport processes,including electronic conduction,charge transfer,and solid-state diffusion.The approach proposed herein offers an unprecedented route for engineering SX anodes to boost Li-ion storage.展开更多
The development of n-type semiconductor is still far behind that of p-type semiconductor on account of the challenges in enhancing carrier mobility and environmental stability.Herein,by blending with the polymers,n-ty...The development of n-type semiconductor is still far behind that of p-type semiconductor on account of the challenges in enhancing carrier mobility and environmental stability.Herein,by blending with the polymers,n-type ultrathin crystalline thin film was successfully prepared by the method of meniscus-guided coating.Remarkably,the n-type crystalline films exhibit ultrathin thickness as low as 5 nm and excellent mobility of 1.58 cm^(2) V^(-1) s^(-1),which is outstanding in currently reported organic n-type transistors.Moreover,the PS layer provides a high-quality interface with ultralow defect which has strong resistance to external interference with excellent long-term stability,paving the way for the application of n-type transistors in logic circuits.展开更多
Bi_(2)Te_(3)-based materials have drawn much attention from the thermoelectric community due to their excellent thermoelectric performance near room temperature.However,the stability of existing n-type Bi_(2)(Te,Se)_(...Bi_(2)Te_(3)-based materials have drawn much attention from the thermoelectric community due to their excellent thermoelectric performance near room temperature.However,the stability of existing n-type Bi_(2)(Te,Se)_(3)materials is still low due to the evaporation energy of Se(37.70 kJ mol^(-1))being much lower than that of Te(52.55 kJ mol^(-1)).The evaporated Se from the material causes problems in interconnects of the module while degrading the efficiency.Here,we have developed a new approach for the high-performance and stable n-type Se-free Bi_(2)Te_(3)-based materials bymaximizing the electronic transport while suppressing the phonon transport,at the same time.Spontaneously generated FeTe_(2)nanoinclusions within the matrix during the melt-spinning and subsequent spark plasma sintering is the key to simultaneous engineering of the power factor and lattice thermal conductivity.The nanoinclusions change the fermi level of the matrix while intensifying the phonon scattering via nanoparticles.With a fine-tuning of the fermi level with Cu doping in the n-type Bi_(2)Te_(3)-0.02FeTe_(2),a high power factor of∼41×10^(-4)Wm^(-1)K^(-2)with an average zT of 1.01 at the temperature range 300-470 K are achieved,which are comparable to those obtained in n-type Bi_(2)(Te,Se)_(3)materials.The proposed approach enables the fabrication of high-performance n-type Bi_(2)Te_(3)-based materials without having to include volatile Se element,which guarantees the stability of the material.Consequently,widespread application of thermoelectric devices utilizing the n-type Bi_(2)Te_(3)-based materials will become possible.展开更多
The p-type TiCoSb-based half-Heuslers are widely studied due to the good electrical transport properties after hole doping,while the pristine TiCoSb is intrinsically n-type.It is thus desired to obtain a comparable n-...The p-type TiCoSb-based half-Heuslers are widely studied due to the good electrical transport properties after hole doping,while the pristine TiCoSb is intrinsically n-type.It is thus desired to obtain a comparable n-type counterpart through optimization of electron concentration.In this work,n-type Ti_(0.9-x)HfxTa_(0.1)CoSb half-Heuslers were fabricated by arc melting,ball milling,and spark plasma sintering.An optimized carrier concentration,together with a decreased lattice thermal conductivity,was obtained by Ta doping at the Ti site,leading to a peak figure of merit(ZT)of 0.7 at 973 K in Ti_(0.9)Ta_(0.1)-CoSb.By further alloying Hf at the Ti site,the lattice thermal conductivity was significantly reduced without deteriorating the power factor.As a result,a peak ZT of 0.9 at 973 K and an average ZT of 0.54 in the temperature range of 300-973 K were achieved in Ti_(0.6)Hf_(0.3)Ti_(0.1)CoSb.This work demonstrates that n-type TiCoSb-based halfHeuslers are promising thermoelectric materials.展开更多
Recent theoretical predictions and experimental findings on the transport properties of n-type SnTe have triggered extensive researches on this simple binary compound,despite the realization of n-type SnTe being a gre...Recent theoretical predictions and experimental findings on the transport properties of n-type SnTe have triggered extensive researches on this simple binary compound,despite the realization of n-type SnTe being a great challenge.Herein,Cl as a donor dopant can effectively regulate the position of Fermi level in Sn_(0.6)Pb_(0.4)Te matrix and successfully achieve the n-type transport behavior in SnTe.An outstanding power factor of~14.7μW·cm^(-1)·K^(-2) at 300 K was obtained for Cl-doped Sn_(0.6)Pb_(0.4)Te sample.By combining the experimental analysis with theoretical calculations,the transport properties of n-type SnTe thermoelectrics doped with different halogen dopants(Cl,Br,and I)were then systematically investigated and estimated.The results demonstrated that Br and I had better doping efficiencies compared with Cl,which contributed to the well-optimized carrier concentrations of~1.03×10^(19)and~1.11×10^(19)cm^(-3)at 300 K,respectively.The improved n-type carrier concentrations effectively lead to the significant enhancement on the thermoelectric performance of n-type SnTe.Our study further promoted the experimental progress and deep interpretation of the transport features in n-type SnTe thermoelectrics.The present results could also be crucial for the development of n-type counterparts for SnTe-based thermoelectric devices.展开更多
The lattice, the band gap and the optical properties of n-type ZnO under uniaxial stress are investigated by first- principles calculations. The results show that the lattice constants change linearly with stress. Ban...The lattice, the band gap and the optical properties of n-type ZnO under uniaxial stress are investigated by first- principles calculations. The results show that the lattice constants change linearly with stress. Band gaps are broadened linearly as the uniaxial compressive stress increases. The change of band gap for n-type ZnO comes mainly from the contribution of stress in the c-axis direction, and the reason for band gap of n-type ZnO changing with stress is also explained. The calculated results of optical properties reveal that the imaginary part of the dielectric function decreases with the increase of uniaxial compressive stress at low energy. However, when the energy is higher than 4.0 eV, the imaginary part of the dielectric function increases with the increase of stress and a blueshift appears. There are two peaks in the absorption spectrum in an energy range of 4.0-13.0 eV. The stress coefficient of the band gap of n-type ZnO is larger than that of pure ZnO, which supplies the theoretical reference value for the modulation of the band gap of doped ZnO.展开更多
We theoretically investigate the Doppler effect on optical bistability in an N-type active Raman gain atomic system inside an optical ring cavity. It is shown that the Doppler effect can greatly enhance the dispersion...We theoretically investigate the Doppler effect on optical bistability in an N-type active Raman gain atomic system inside an optical ring cavity. It is shown that the Doppler effect can greatly enhance the dispersion and thus create the bistable behaviour or greatly increase the bistable region, which has been known as the positive Doppler effect on optical bistability. In addition, we find that a positive Doppler effect can change optical bistability from the hybrid dispersion-gain type to a dispersive type.展开更多
We present a detailed investigation of magnetic properties of colossal magnetoresistance material HgCr2Se4. While spontaneous magnetization and zero-field magnetic susceptibility are found to follow asymptotic scaling...We present a detailed investigation of magnetic properties of colossal magnetoresistance material HgCr2Se4. While spontaneous magnetization and zero-field magnetic susceptibility are found to follow asymptotic scaling laws for a narrow range of temperatures near the critical point, two methods with connections to the renormalization group theory provide analytical descriptions of the magnetic properties for much wider temperature ranges. Based on this, an analytical formula is obtained for the temperature dependence of the low field magnetoresistance in the paramagnetic phase.展开更多
The active layer of all polymer solar cells(all-PSCs)is composed of a blend of a p-type conjugated polymer(p-CP)as donor and an n-type conjugated polymer(n-CP)as acceptor.All-PSCs possess the advantages of light weigh...The active layer of all polymer solar cells(all-PSCs)is composed of a blend of a p-type conjugated polymer(p-CP)as donor and an n-type conjugated polymer(n-CP)as acceptor.All-PSCs possess the advantages of light weight,thin active layer,mechanical flexibility,low cost solution processing and high stability,but the power conversion efficiency(PCE)of the all-PSCs was limited by the poor photovoltaic performance of the n-CP acceptors before 2016.Since the report of the strategy of polymerized small molecule acceptors(PSMAs)in 2017,the photovoltaic performance of the PSMA-based n-CPs improved rapidly,benefitted from the development of the A-DA’D-A type small molecule acceptors(SMAs).PCE of the all-PSCs based on the PSMA acceptors reached 17%-18%recently.In this review article,we will introduce the development history of the n-CPs,especially the recent research progress of the PSMAs.Particularly,the structure-property relationship of the PSMAs is introduced and discussed.Finally,current challenges and prospects of the n-CP acceptors are analyzed and discussed.展开更多
A new super-junction lateral double diffused MOSFET （LDMOST） structure is designed with n-type charge compensation layer embedded in the p^--substrate near the drain to suppress substrate-assisted depletion effect t...A new super-junction lateral double diffused MOSFET （LDMOST） structure is designed with n-type charge compensation layer embedded in the p^--substrate near the drain to suppress substrate-assisted depletion effect that results from the compensating charges imbalance between the pillars in the n-type buried layer. A high electric field peak is introduced in the surface by the pn junction between the p^--substrate and n-type buried layer, which given rise to a more uniform surface electric field distribution by modulation effect. The effect of reduced bulk field （REBULF） is introduced to improve the vertical breakdown voltage by reducing the high bulk electric field around the drain, The new structure features high breakdown voltage, low on-resistance and charges balance in the drift region due to n-type buried layer.展开更多
In this study,we introduce multi-walled carbon nanotubes(MWCNTs)in Pb/I co-doped n-type polycrys-tal SnSe to simultaneously improve its thermoelectric and mechanical properties for the first time.The introduced MWCNTs...In this study,we introduce multi-walled carbon nanotubes(MWCNTs)in Pb/I co-doped n-type polycrys-tal SnSe to simultaneously improve its thermoelectric and mechanical properties for the first time.The introduced MWCNTs act as the“bridges”to accelerate the electron carrier transport between SnSe grains,leading to significantly increased electrical conductivity from 32.6 to 45.7 S cm^(−1) at 773 K,which con-tributes to an enhanced power factor of∼5.0μW cm^(−1) K^(−2) at this temperature.Although MWCNTs possess high intrinsic thermal conductivities,these MWCNTs,acting as nanoinclusions in the SnSe matrix to form the dense interfaces between SnSe and MWCNTs,provide extra heat-carrying phonon scattering centers,leading to a slightly reduced lattice thermal conductivity of only 0.34 W m^(−1) K^(−2) at 773 K and in turn,a high ZT of∼1.0 at this temperature.Furthermore,the introduced MWCNTs can simultane-ously act as the“binders”to bond adjacent grains,significantly improving the mechanical properties of SnSe by boosting its Vickers hardness from 39.5 to 50.5.This work indicates that our facile approach can achieve high thermoelectric and mechanical properties in n-type SnSe polycrystals with a considerable potential for applying to thermoelectric devices as n-type elements.展开更多
The influence of total dose irradiation on hot-carrier reliability of 65 nm n-type metal-oxide-semiconductor field- effect transistors （nMOSFETs） is investigated. Experimental results show that hot-carrier degradati...The influence of total dose irradiation on hot-carrier reliability of 65 nm n-type metal-oxide-semiconductor field- effect transistors （nMOSFETs） is investigated. Experimental results show that hot-carrier degradations on ir- radiated narrow channel nMOSFETs are greater than those without irradiation. The reason is attributed to radiation-induced charge trapping in shallow trench isolation （STI）. The electric field in the pinch-off region of the nMOSFET is enhanced by radiation-induced charge trapping in STI, resulting in a more severe hot-carrier effect.展开更多
Thermoelectric(TE)materials based on conjugated polymers have received much attention due to their great advantages of solution processibility,light weight,flexibility,and low thermal conductivity.These advantages mak...Thermoelectric(TE)materials based on conjugated polymers have received much attention due to their great advantages of solution processibility,light weight,flexibility,and low thermal conductivity.These advantages make them potential candidates for large-area,low-cost and low-power TE applications.Both efficient p-type and n-type conjugated polymers with high and comparable thermoelectric performance are required for practical TE applications.However,due to the inefficient n-doping efficiency and unstable electron transport of most n-type conjugated polymers,the TE performance of n-type polymers is much poorer than that of their p-type counterparts,impeding the development of polymer TE materials.Great efforts have been made to address the low ndoping efficiency and TE performance of n-type polymers,including the chemical modification of traditional ntype polymers,the design of new n-type conjugated polymers,and the development of more efficient n-dopants,as well as doping engineering.Nowadays,the TE performance of n-type polymers has been greatly improved,indicating a bright future for polymer TE materials.In this review,we summarize the recent progress made on ntype polymer TE materials,mainly focusing on the structure-performance relationships based on promising n-type polymers for TE applications.This review aims to provide some guidelines for future material design.展开更多
This paper reports on the n-type ZnS used as electron transport layer for the organic light-emitting diodes （OLEDs）. The naphthyl-substituted benzidine derivative （NPB） and tris （8-hydroxyquinoline） aluminium （...This paper reports on the n-type ZnS used as electron transport layer for the organic light-emitting diodes （OLEDs）. The naphthyl-substituted benzidine derivative （NPB） and tris （8-hydroxyquinoline） aluminium （Alq3） are used as the hole transport layer and the emitting layer respectively. The insertion of the n-type ZnS layer enhances the electron injection in the OLEDs. The study was carried out on OLEDs of structures： indium-tin-oxide （ITO）/NPB/Alq3/ZnS/LiF/AL, ITO/NPB/Alq3/LiF/AL and ITO/NPB/Alq3/AL. The luminance and efficiency of the device containing this electron transport layer are increased significantly over those obtained from conventional devices due to better carrier balance.展开更多
The effects of ion doses on the properties of boron implanted Si for n-type solar cell application were investigated with doses ranging from 5×10^14cm^-2 to 2×10^15cm^-2 and a subsequent two-step annealing p...The effects of ion doses on the properties of boron implanted Si for n-type solar cell application were investigated with doses ranging from 5×10^14cm^-2 to 2×10^15cm^-2 and a subsequent two-step annealing process in a tube furnace.With the help of the TCAD process simulation tool, knowledge on diffusion kinetics of dopants and damage evolution was obtained by fitting SIMS measured boron profiles. Due to insufficient elimination of the residual damage, the implanted emitter was found to have a higher saturation current density（J0e） and a poorer crystallographic quality. Consistent with this observation, V oc, J sc, and the efficiency of the all-implanted p^＋–n–n^＋solar cells followed a decreasing trend with an increase of the implantation dose. The obtained maximum efficiency was 19.59% at a low dose of 5×10^14cm^-2. The main efficiency loss under high doses came not only from increased recombination of carriers in the space charge region revealed by double-diode parameters of dark I–V curves, but also from the degraded minority carrier diffusion length in the emitter and base evidenced by IQE data. These experimental results indicated that clusters and dislocation loops had appeared at high implantation doses, which acted as effective recombination centers for photogenerated carriers.展开更多
We study the electromagnetically induced-absorption-like(EIA-like)effect for an n-type system in an^(87)Rb Bose–Einstein condensate(BEC)using the absorption imaging technique for coupling and driving lasers operating...We study the electromagnetically induced-absorption-like(EIA-like)effect for an n-type system in an^(87)Rb Bose–Einstein condensate(BEC)using the absorption imaging technique for coupling and driving lasers operating at the D_(1) and D_(2 )lines of^(87)Rb.The coherent effect is probed by measuring the number of atoms remaining after the BEC is exposed to strong driving fields and a weak probe field.The absorption imaging technique accurately reveals the EIA-like effect of the n-type system.This coherent effect in an n-type system is useful for optical storage,tunable optical switching,and so on.展开更多
With the growing need on distributed power supply for portable electronics,energy harvesting from environment becomes a promising solution.Organic thermoelectric(TE)materials have advantages in intrinsic flexibility a...With the growing need on distributed power supply for portable electronics,energy harvesting from environment becomes a promising solution.Organic thermoelectric(TE)materials have advantages in intrinsic flexibility and low thermal conductivity,thus hold great prospect in applications as a flexible power generator from dissipated heat.Nevertheless,the weak electrical transport behaviors of organic TE materials have severely impeded their development.Moreover,compared with p-type organic TE materials,stable and high-performance n-type counterparts are more difficult to obtain.Here,we developed a n-type polyaniline-based hybrid with core-shell heterostructured Bi;S;@Bi nanorods as fillers,showing a Seebeck coefficient-159.4μV/K at room temperature.Further,a couple of n/p legs from the PANI-based hybrids were integrated into an elastomer substrate forming a stretchable thermoelectric generator(TEG),whose function to output stable voltages responding to temperature differences has been demonstrated.The in situ output performance of the TEG under stretching could withstand up to 75%elongation,and stability test showed little degradation over a one-month period in the air.This study provides a promising strategy to develop stable and high thermopower organic TEGs harvesting heat from environment as long-term power supply.展开更多
Realizing high performance in both n-type and p-type materials is essential for designing efficient ther-moelectric devices.However,the doping bottleneck is often encountered,i.e.,only one type of conduction can be re...Realizing high performance in both n-type and p-type materials is essential for designing efficient ther-moelectric devices.However,the doping bottleneck is often encountered,i.e.,only one type of conduction can be realized.As one example,p-type CdSb with high thermoelectric performance has been discovered for several decades,while its n-type counterpart has rarely been reported.In this work,the calculated band structure of CdSb demonstrates that the valley degeneracy is as large as ten for the conduction band,and it is only two for the valence band.Therefore,the n-type CdSb can potentially realize an ex-ceptional thermoelectric performance.Experimentally,the n-type conduction has been successfully real-ized by tuning the stoichiometry of CdSb.By further doping indium at the Cd site,an improved room-temperature electron concentration has been achieved.Band modeling predicts an optimal electron con-centration of∼2.0×1019 cm−3,which is higher than the current experimental values.Therefore,future optimization of the n-type CdSb should mainly focus on identifying practical approaches to optimize the electron concentration.展开更多
基金supported by the National Natural Science Foundation of China(Project no.51973120)the Natural Science Foun-dation of Guangdong Province(No.2019A1515010613)+1 种基金the Shenzhen Science and Technology Research Grant(Nos.JCYJ20170818093417096 and JCYJ20180305125649693)the Shenzhen Science and Technology Program(No.20220809111527001).
文摘Due to its ability to convert body heat into electricity,organic thermoelectric material is considered a promising and smart maintenance-free power source to charge wearable electronics.However,developing flexible n-type organic thermoelectric materials and wearable p/n junction thermoelectric devices remains challenging.In this work,two insulated polyamides(PA6 and PA66)that have been widely used as fiber materials are employed as novel dopants for converting p-type single-walled carbon nanotubes(SWCNTs)to n-type thermoelectric materials.Because of the electron transferability of the amide group,polyamide-doped SWCNTs exhibit excellent thermopower values as large as-56.0μV K^(-1) for PA66,and-54.5μV K^(-1) for PA6.Thermoelectric devices with five p/n junctions connected in series are fabricated.The testing device produces a thermoelectric voltage of 43.1 mV and generates 1.85μW thermoelectric power under temperature gradients of approximately 80 K.Furthermore,they display charming capability for temperature recognition and monitoring human activities as sensors.These promising results suggest that the flexible polyamide-doped SWCNT composites herein have high application potential as wearable thermoelectric electronics.
基金support from the National Natural Science Foundation of China(Nos.22071007,22020102001,22335002)the National Key R&D Program of China(No.2022YFB3602802)+3 种基金Beijing Natural Science Foundation(No.Z220025)the National Facility for Protein Science in Shanghai,Shanghai Advanced Research Institute,CAS,for providing technical support in X-ray diffraction data collectionthe High-Performance Computing Platform of Peking University for supporting the computational workthe support of BMS Junior Fellow program。
文摘Regioselevtive functionalization of perylene diimides(PDIs)at bay area often requires multistep synthesis and strenuous recrystallization.Direct bromination of perylene diimides only afford the 1,6 and 1,7-regioisomers.More importantly,the 1,6-dibromo regioisomers could only be separated by preparative HPLC.Herein,we report a promising strategy for constructing Janus backbone of BN-doped perylene diimide derivatives.This Janus-type configuration results in the unique regioselective functionalization of BN-JPDIs,which yields exclusively the 1,6-regioisomers.Further investigation shows that the Janus-type configuration leads to a net dipole moment of 1.94 D and intramolecular charge transfer,which causes substantial changes on the optoelectronic properties.Moreover,the single crystal organic field-effect transistors based on BN-JPDIs exhibit electron mobilities up to 0.57 cm^(2)V^(-1)s^(-1),showcasing their potential as versatile building block towards high-performance n-type organic semiconductors.
基金supported by the Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(2020R1A6A1A03045059)+1 种基金by Ministry of Science and ICT(2022R1A2C3003319)by the Institutional Program(2E33221)of the Korea Institute of Science and Technology(KIST).
文摘Doped two-dimensional(2D)materials hold significant promise for advancing many technologies,such as microelectronics,optoelectronics,and energy storage.Herein,n-type 2D oxidized Si nanosheets,namely n-type siloxene(n-SX),are employed as Li-ion battery anodes.Via thermal evaporation of sodium hypophosphite at 275℃,P atoms are effectively incorporated into siloxene(SX)without compromising its 2D layered morphology and unique Kautsky-type crystal structure.Further,selective nucleophilic substitution occurs,with only Si atoms being replaced by P atoms in the O_(3)≡Si-H tetrahedra.The resulting n-SX possesses two delocalized electrons arising from the presence of two electron donor types:(i)P atoms residing in Si sites and(ii)H vacancies.The doping concentrations are varied by controlling the amount of precursors or their mean free paths.Even at 2000 mA g^(-1),the n-SX electrode with the optimized doping concentration(6.7×10^(19) atoms cm^(-3))delivers a capacity of 594 mAh g^(-1) with a 73%capacity retention after 500 cycles.These improvements originate from the enhanced kinetics of charge transport processes,including electronic conduction,charge transfer,and solid-state diffusion.The approach proposed herein offers an unprecedented route for engineering SX anodes to boost Li-ion storage.
基金the financial support of the National Key Research and Development Program(No.2022YFF1202700)National Natural Science Foundation of China(No.52121002)the Haihe Laboratory of Sustainable Chemical Transformations.
文摘The development of n-type semiconductor is still far behind that of p-type semiconductor on account of the challenges in enhancing carrier mobility and environmental stability.Herein,by blending with the polymers,n-type ultrathin crystalline thin film was successfully prepared by the method of meniscus-guided coating.Remarkably,the n-type crystalline films exhibit ultrathin thickness as low as 5 nm and excellent mobility of 1.58 cm^(2) V^(-1) s^(-1),which is outstanding in currently reported organic n-type transistors.Moreover,the PS layer provides a high-quality interface with ultralow defect which has strong resistance to external interference with excellent long-term stability,paving the way for the application of n-type transistors in logic circuits.
基金supported by Nano·Material Technology Development Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Science and ICT(2022M3H4A1A04076667)
文摘Bi_(2)Te_(3)-based materials have drawn much attention from the thermoelectric community due to their excellent thermoelectric performance near room temperature.However,the stability of existing n-type Bi_(2)(Te,Se)_(3)materials is still low due to the evaporation energy of Se(37.70 kJ mol^(-1))being much lower than that of Te(52.55 kJ mol^(-1)).The evaporated Se from the material causes problems in interconnects of the module while degrading the efficiency.Here,we have developed a new approach for the high-performance and stable n-type Se-free Bi_(2)Te_(3)-based materials bymaximizing the electronic transport while suppressing the phonon transport,at the same time.Spontaneously generated FeTe_(2)nanoinclusions within the matrix during the melt-spinning and subsequent spark plasma sintering is the key to simultaneous engineering of the power factor and lattice thermal conductivity.The nanoinclusions change the fermi level of the matrix while intensifying the phonon scattering via nanoparticles.With a fine-tuning of the fermi level with Cu doping in the n-type Bi_(2)Te_(3)-0.02FeTe_(2),a high power factor of∼41×10^(-4)Wm^(-1)K^(-2)with an average zT of 1.01 at the temperature range 300-470 K are achieved,which are comparable to those obtained in n-type Bi_(2)(Te,Se)_(3)materials.The proposed approach enables the fabrication of high-performance n-type Bi_(2)Te_(3)-based materials without having to include volatile Se element,which guarantees the stability of the material.Consequently,widespread application of thermoelectric devices utilizing the n-type Bi_(2)Te_(3)-based materials will become possible.
基金financially supported by the National Natural Science Foundation of China(Nos.51971081 and 11674078)the Natural Science Foundation for Distinguished Young Scholars of Guangdong Province of China(No.202031515020023)Shenzhen Science and Technology Innovation Plan(No.KQJSCX20180328165435202)。
文摘The p-type TiCoSb-based half-Heuslers are widely studied due to the good electrical transport properties after hole doping,while the pristine TiCoSb is intrinsically n-type.It is thus desired to obtain a comparable n-type counterpart through optimization of electron concentration.In this work,n-type Ti_(0.9-x)HfxTa_(0.1)CoSb half-Heuslers were fabricated by arc melting,ball milling,and spark plasma sintering.An optimized carrier concentration,together with a decreased lattice thermal conductivity,was obtained by Ta doping at the Ti site,leading to a peak figure of merit(ZT)of 0.7 at 973 K in Ti_(0.9)Ta_(0.1)-CoSb.By further alloying Hf at the Ti site,the lattice thermal conductivity was significantly reduced without deteriorating the power factor.As a result,a peak ZT of 0.9 at 973 K and an average ZT of 0.54 in the temperature range of 300-973 K were achieved in Ti_(0.6)Hf_(0.3)Ti_(0.1)CoSb.This work demonstrates that n-type TiCoSb-based halfHeuslers are promising thermoelectric materials.
基金supported by the National Natural Science Foundation of China(No.52002042)the National Postdoctoral Program for Innovative Talents(No.BX20200028)+3 种基金the National Key Research and Development Program of China(No.2018YFA0702100)China Postdoctoral Science Foundation(No.2021M690280)the Natural Science Foundation of Chongqing,China(No.cstc2019jcyj-msxmX0554)the support from the National Science Fund for Distinguished Young Scholars(No.51925101)。
文摘Recent theoretical predictions and experimental findings on the transport properties of n-type SnTe have triggered extensive researches on this simple binary compound,despite the realization of n-type SnTe being a great challenge.Herein,Cl as a donor dopant can effectively regulate the position of Fermi level in Sn_(0.6)Pb_(0.4)Te matrix and successfully achieve the n-type transport behavior in SnTe.An outstanding power factor of~14.7μW·cm^(-1)·K^(-2) at 300 K was obtained for Cl-doped Sn_(0.6)Pb_(0.4)Te sample.By combining the experimental analysis with theoretical calculations,the transport properties of n-type SnTe thermoelectrics doped with different halogen dopants(Cl,Br,and I)were then systematically investigated and estimated.The results demonstrated that Br and I had better doping efficiencies compared with Cl,which contributed to the well-optimized carrier concentrations of~1.03×10^(19)and~1.11×10^(19)cm^(-3)at 300 K,respectively.The improved n-type carrier concentrations effectively lead to the significant enhancement on the thermoelectric performance of n-type SnTe.Our study further promoted the experimental progress and deep interpretation of the transport features in n-type SnTe thermoelectrics.The present results could also be crucial for the development of n-type counterparts for SnTe-based thermoelectric devices.
基金Project supported by the National Natural Science Foundation of China (Grant No. 61076098)the Innovative Foundation for Doctoral Candidate of Jiangsu Province, China (Grant No. CX10B 252Z)
文摘The lattice, the band gap and the optical properties of n-type ZnO under uniaxial stress are investigated by first- principles calculations. The results show that the lattice constants change linearly with stress. Band gaps are broadened linearly as the uniaxial compressive stress increases. The change of band gap for n-type ZnO comes mainly from the contribution of stress in the c-axis direction, and the reason for band gap of n-type ZnO changing with stress is also explained. The calculated results of optical properties reveal that the imaginary part of the dielectric function decreases with the increase of uniaxial compressive stress at low energy. However, when the energy is higher than 4.0 eV, the imaginary part of the dielectric function increases with the increase of stress and a blueshift appears. There are two peaks in the absorption spectrum in an energy range of 4.0-13.0 eV. The stress coefficient of the band gap of n-type ZnO is larger than that of pure ZnO, which supplies the theoretical reference value for the modulation of the band gap of doped ZnO.
基金Project supported by the National Natural Science Foundation of China (Grant No. 60978013)the Shanghai Rising Star Project,China (Grant No. 11QA1407400)
文摘We theoretically investigate the Doppler effect on optical bistability in an N-type active Raman gain atomic system inside an optical ring cavity. It is shown that the Doppler effect can greatly enhance the dispersion and thus create the bistable behaviour or greatly increase the bistable region, which has been known as the positive Doppler effect on optical bistability. In addition, we find that a positive Doppler effect can change optical bistability from the hybrid dispersion-gain type to a dispersive type.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61425015,11474330 and 11374337the National Basic Research Program of China under Grant Nos 2012CB921703 and 2015CB921102the Chinese Academy of Sciences
文摘We present a detailed investigation of magnetic properties of colossal magnetoresistance material HgCr2Se4. While spontaneous magnetization and zero-field magnetic susceptibility are found to follow asymptotic scaling laws for a narrow range of temperatures near the critical point, two methods with connections to the renormalization group theory provide analytical descriptions of the magnetic properties for much wider temperature ranges. Based on this, an analytical formula is obtained for the temperature dependence of the low field magnetoresistance in the paramagnetic phase.
基金financially supported by the National Natural Science Foundation of China(Nos.61904181,51820105003,52173188 and 21734008)the Basic and Applied Basic Research Major Program of Guangdong Province(No.2019B030302007)。
文摘The active layer of all polymer solar cells(all-PSCs)is composed of a blend of a p-type conjugated polymer(p-CP)as donor and an n-type conjugated polymer(n-CP)as acceptor.All-PSCs possess the advantages of light weight,thin active layer,mechanical flexibility,low cost solution processing and high stability,but the power conversion efficiency(PCE)of the all-PSCs was limited by the poor photovoltaic performance of the n-CP acceptors before 2016.Since the report of the strategy of polymerized small molecule acceptors(PSMAs)in 2017,the photovoltaic performance of the PSMA-based n-CPs improved rapidly,benefitted from the development of the A-DA’D-A type small molecule acceptors(SMAs).PCE of the all-PSCs based on the PSMA acceptors reached 17%-18%recently.In this review article,we will introduce the development history of the n-CPs,especially the recent research progress of the PSMAs.Particularly,the structure-property relationship of the PSMAs is introduced and discussed.Finally,current challenges and prospects of the n-CP acceptors are analyzed and discussed.
基金Project supported by the National Natural Science Foundation of China （Grant No 60436030） and the Key Laboratory for Defence Science and Technology on Military Simulation Integrated Circuits （Grant No 9140C0903010604）.
文摘A new super-junction lateral double diffused MOSFET （LDMOST） structure is designed with n-type charge compensation layer embedded in the p^--substrate near the drain to suppress substrate-assisted depletion effect that results from the compensating charges imbalance between the pillars in the n-type buried layer. A high electric field peak is introduced in the surface by the pn junction between the p^--substrate and n-type buried layer, which given rise to a more uniform surface electric field distribution by modulation effect. The effect of reduced bulk field （REBULF） is introduced to improve the vertical breakdown voltage by reducing the high bulk electric field around the drain, The new structure features high breakdown voltage, low on-resistance and charges balance in the drift region due to n-type buried layer.
基金financially supported by the National Natural Science Foundation of China (No. 51972170)the State Key Laboratory of Materials-Oriented Chemical Engineering (No. ZK201812)+4 种基金the CAS Key Laboratory of Carbon Materials (No. KLCMKFJJ2002)the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)the Jiangsu Specially-Appointed Professor Programthe financially support from the Australian Research Council, Innovation centre for Sustainable Steel (ICSS)USQ strategic research grant
文摘In this study,we introduce multi-walled carbon nanotubes(MWCNTs)in Pb/I co-doped n-type polycrys-tal SnSe to simultaneously improve its thermoelectric and mechanical properties for the first time.The introduced MWCNTs act as the“bridges”to accelerate the electron carrier transport between SnSe grains,leading to significantly increased electrical conductivity from 32.6 to 45.7 S cm^(−1) at 773 K,which con-tributes to an enhanced power factor of∼5.0μW cm^(−1) K^(−2) at this temperature.Although MWCNTs possess high intrinsic thermal conductivities,these MWCNTs,acting as nanoinclusions in the SnSe matrix to form the dense interfaces between SnSe and MWCNTs,provide extra heat-carrying phonon scattering centers,leading to a slightly reduced lattice thermal conductivity of only 0.34 W m^(−1) K^(−2) at 773 K and in turn,a high ZT of∼1.0 at this temperature.Furthermore,the introduced MWCNTs can simultane-ously act as the“binders”to bond adjacent grains,significantly improving the mechanical properties of SnSe by boosting its Vickers hardness from 39.5 to 50.5.This work indicates that our facile approach can achieve high thermoelectric and mechanical properties in n-type SnSe polycrystals with a considerable potential for applying to thermoelectric devices as n-type elements.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11475255,U1532261 and 11505282
文摘The influence of total dose irradiation on hot-carrier reliability of 65 nm n-type metal-oxide-semiconductor field- effect transistors （nMOSFETs） is investigated. Experimental results show that hot-carrier degradations on ir- radiated narrow channel nMOSFETs are greater than those without irradiation. The reason is attributed to radiation-induced charge trapping in shallow trench isolation （STI）. The electric field in the pinch-off region of the nMOSFET is enhanced by radiation-induced charge trapping in STI, resulting in a more severe hot-carrier effect.
基金the financial support of the National Natural Science Foundation of China(No.21625403,21875244,21875241,22075271)。
文摘Thermoelectric(TE)materials based on conjugated polymers have received much attention due to their great advantages of solution processibility,light weight,flexibility,and low thermal conductivity.These advantages make them potential candidates for large-area,low-cost and low-power TE applications.Both efficient p-type and n-type conjugated polymers with high and comparable thermoelectric performance are required for practical TE applications.However,due to the inefficient n-doping efficiency and unstable electron transport of most n-type conjugated polymers,the TE performance of n-type polymers is much poorer than that of their p-type counterparts,impeding the development of polymer TE materials.Great efforts have been made to address the low ndoping efficiency and TE performance of n-type polymers,including the chemical modification of traditional ntype polymers,the design of new n-type conjugated polymers,and the development of more efficient n-dopants,as well as doping engineering.Nowadays,the TE performance of n-type polymers has been greatly improved,indicating a bright future for polymer TE materials.In this review,we summarize the recent progress made on ntype polymer TE materials,mainly focusing on the structure-performance relationships based on promising n-type polymers for TE applications.This review aims to provide some guidelines for future material design.
基金Project supported by the National Natural Science Foundation of China （Grant No 60476005）, the Scientific Research Foundation for Returned 0verseas Chinese Scholars, the State Education Ministry, the State Key Program for Basic Research of the Ministry of Science and Technology of China （Grant No 2003CB314707）, and the Key Project of National Natural Science Foundation of China （Grant No 50532090）.
文摘This paper reports on the n-type ZnS used as electron transport layer for the organic light-emitting diodes （OLEDs）. The naphthyl-substituted benzidine derivative （NPB） and tris （8-hydroxyquinoline） aluminium （Alq3） are used as the hole transport layer and the emitting layer respectively. The insertion of the n-type ZnS layer enhances the electron injection in the OLEDs. The study was carried out on OLEDs of structures： indium-tin-oxide （ITO）/NPB/Alq3/ZnS/LiF/AL, ITO/NPB/Alq3/LiF/AL and ITO/NPB/Alq3/AL. The luminance and efficiency of the device containing this electron transport layer are increased significantly over those obtained from conventional devices due to better carrier balance.
基金supported by the National Natural Science Foundation of China(Grant Nos.61275040,60976046,and 61021003)the National Basic Research Program of China(Grant No.2012CB934200)
文摘The effects of ion doses on the properties of boron implanted Si for n-type solar cell application were investigated with doses ranging from 5×10^14cm^-2 to 2×10^15cm^-2 and a subsequent two-step annealing process in a tube furnace.With the help of the TCAD process simulation tool, knowledge on diffusion kinetics of dopants and damage evolution was obtained by fitting SIMS measured boron profiles. Due to insufficient elimination of the residual damage, the implanted emitter was found to have a higher saturation current density（J0e） and a poorer crystallographic quality. Consistent with this observation, V oc, J sc, and the efficiency of the all-implanted p^＋–n–n^＋solar cells followed a decreasing trend with an increase of the implantation dose. The obtained maximum efficiency was 19.59% at a low dose of 5×10^14cm^-2. The main efficiency loss under high doses came not only from increased recombination of carriers in the space charge region revealed by double-diode parameters of dark I–V curves, but also from the degraded minority carrier diffusion length in the emitter and base evidenced by IQE data. These experimental results indicated that clusters and dislocation loops had appeared at high implantation doses, which acted as effective recombination centers for photogenerated carriers.
基金the National Key Research and Development Program of China under Grant No 2016YFA0301602the National Natural Science Foundation of China under Grant Nos 11474188 and 11704234the Fund for Shanxi‘1331 Project’Key Subjects Construction,and the Program of Youth Sanjin Scholar
文摘We study the electromagnetically induced-absorption-like(EIA-like)effect for an n-type system in an^(87)Rb Bose–Einstein condensate(BEC)using the absorption imaging technique for coupling and driving lasers operating at the D_(1) and D_(2 )lines of^(87)Rb.The coherent effect is probed by measuring the number of atoms remaining after the BEC is exposed to strong driving fields and a weak probe field.The absorption imaging technique accurately reveals the EIA-like effect of the n-type system.This coherent effect in an n-type system is useful for optical storage,tunable optical switching,and so on.
基金supported by the National Key Research and Development Program of China(Grant Nos.2018YFA0702100 and 2018YFB0703600)the National Natural Science Foundation of China(Grant Nos.51872009 and 92066203)+1 种基金Beijing Nova Programme Interdisciplinary Cooperation Projectthe Fundamental Research Funds for the Central Universities,China。
文摘With the growing need on distributed power supply for portable electronics,energy harvesting from environment becomes a promising solution.Organic thermoelectric(TE)materials have advantages in intrinsic flexibility and low thermal conductivity,thus hold great prospect in applications as a flexible power generator from dissipated heat.Nevertheless,the weak electrical transport behaviors of organic TE materials have severely impeded their development.Moreover,compared with p-type organic TE materials,stable and high-performance n-type counterparts are more difficult to obtain.Here,we developed a n-type polyaniline-based hybrid with core-shell heterostructured Bi;S;@Bi nanorods as fillers,showing a Seebeck coefficient-159.4μV/K at room temperature.Further,a couple of n/p legs from the PANI-based hybrids were integrated into an elastomer substrate forming a stretchable thermoelectric generator(TEG),whose function to output stable voltages responding to temperature differences has been demonstrated.The in situ output performance of the TEG under stretching could withstand up to 75%elongation,and stability test showed little degradation over a one-month period in the air.This study provides a promising strategy to develop stable and high thermopower organic TEGs harvesting heat from environment as long-term power supply.
基金supported by the Shenzhen Science and Tech-nology Program (No.KQTD20200820113045081)the State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology.J.M.acknowledges the financial support from the National Natural Science Foundation of China (No.52101248)+6 种基金Shenzhen fundamental research projects (No.JCYJ20210324132808020)the start-up funding of Shenzhen,and the start-up funding of Harbin Institute of Technology (Shenzhen).Q.Z.acknowledges the financial support from the National Nat-ural Science Foundation of China (Nos.52172194 and 51971081)the Natural Science Foundation for Distinguished Young Scholars of Guangdong Province of China (No.2020B1515020023)the Natural Science Foundation for Distinguished Young Scholars of Shenzhen (No.RCJC20210609103733073)the Key Project of Shenzhen Fundamental Research Projects (No.JCYJ20200109113418655)F.C.acknowledges the financial support from the National Natural Science Foundation of China (No.51871081)H.L.acknowledges the financial support from the National Natural Science Foundation of China (No.62174044).
文摘Realizing high performance in both n-type and p-type materials is essential for designing efficient ther-moelectric devices.However,the doping bottleneck is often encountered,i.e.,only one type of conduction can be realized.As one example,p-type CdSb with high thermoelectric performance has been discovered for several decades,while its n-type counterpart has rarely been reported.In this work,the calculated band structure of CdSb demonstrates that the valley degeneracy is as large as ten for the conduction band,and it is only two for the valence band.Therefore,the n-type CdSb can potentially realize an ex-ceptional thermoelectric performance.Experimentally,the n-type conduction has been successfully real-ized by tuning the stoichiometry of CdSb.By further doping indium at the Cd site,an improved room-temperature electron concentration has been achieved.Band modeling predicts an optimal electron con-centration of∼2.0×1019 cm−3,which is higher than the current experimental values.Therefore,future optimization of the n-type CdSb should mainly focus on identifying practical approaches to optimize the electron concentration.
