The optimization of civil engineering structures is critical for enhancing structural performance and material efficiency in engineering applications.Structural optimization approaches seek to determine the optimal de...The optimization of civil engineering structures is critical for enhancing structural performance and material efficiency in engineering applications.Structural optimization approaches seek to determine the optimal design,by considering material performance,cost,and structural safety.The design approaches aim to reduce the built environment’s energy use and carbon emissions.This comprehensive review examines optimization techniques,including size,shape,topology,and multi-objective approaches,by integrating these methodologies.The trends and advancements that contribute to developing more efficient,cost-effective,and reliable structural designs were identified.The review also discusses emerging technologies,such as machine learning applications with different optimization techniques.Optimization of truss,frame,tensegrity,reinforced concrete,origami,pantographic,and adaptive structures are covered and discussed.Optimization techniques are explained,including metaheuristics,genetic algorithm,particle swarm,ant-colony,harmony search algorithm,and their applications with mentioned structure types.Linear and non-linear structures,including geometric and material nonlinearity,are distinguished.The role of optimization in active structures,structural design,seismic design,form-finding,and structural control is taken into account,and the most recent techniques and advancements are mentioned.展开更多
With the development of satellite structure technology, more and more design parameters will affect its structural performance. It is desirable to obtain an optimal structure design with a minimum weight, including op...With the development of satellite structure technology, more and more design parameters will affect its structural performance. It is desirable to obtain an optimal structure design with a minimum weight, including optimal configuration and sizes. The present paper aims to describe an optimization analysis for a satellite structure, including topology optimization and size optimization. Based on the homogenization method, the topology optimization is carried out for the main supporting frame of service module under given constraints and load conditions, and then the sensitivity analysis is made of 15 structural size parameters of the whole satellite and the optimal sizes are obtained. The numerical result shows that the present optimization design method is very effective.展开更多
An irreversible model of high temperature solid oxide fuel cells( SOFCs) working at steady-state is developed,devoted to performing the optimization with regard to two objectives:minimization of the fuel cell size and...An irreversible model of high temperature solid oxide fuel cells( SOFCs) working at steady-state is developed,devoted to performing the optimization with regard to two objectives:minimization of the fuel cell size and maximization of the system efficiency. The performance characteristics of the system are analyzed in details, illustrated by the curves of power density,efficiency and voltage. Genetic algorithm is used to perform the multi-objective optimization with four decision variables: the operating pressure, the fuel stoichiometric ratio, the air stoichiometric ratio and the current density. A Pareto set giving a quantative description of the trade-off between the two objectives is used to analyze the results. Optimization results prove the existence of optimal designs region for a 50 kW system with efficiency from 43% corresponding to a 14. 6 m2 electrolyte area to 48% corresponding to a 25.4 m2 electrolyte area. The SOFC model used is general and the optimization results could be applied to the practical SOFC design.展开更多
This research proposes the utilization of a geopolymer-based blasting sealing material to improve the profitability of coal sales and reduce the rate of coal fragmentation during blasting in open pit mines.The study f...This research proposes the utilization of a geopolymer-based blasting sealing material to improve the profitability of coal sales and reduce the rate of coal fragmentation during blasting in open pit mines.The study first focused on optimizing the strength of the sealant material and reducing curing time.This was achieved by regulating the slag doping and sodium silicate solution modulus.The findings demonstrated that increasing slag content and improving the material resulted in an early rise in strength while increasing the modulus of the sodium silicate solution extended the curing time.The slag doping level was fixed at 80 g,and the sodium silicate solution modulus was set at 1.5.To achieve a strength of 3.12 MPa,the water/gel ratio was set at 0.5.The initial setting time was determined to be 33 min,meeting the required field test duration.Secondly,the strength requirements for field implementation were assessed by simulating the action time and force destruction process of the sealing material during blasting using ANSYS/LS-DYNA software.The results indicated that the modified material meets these requirements.Finally,the Shengli Open Pit Coal Mine served as the site for the field test.It was observed that the hole-sealing material’s hydration reaction created a laminated and flocculated gel inside it.This enhanced the density of the modified material.Additionally,the pregelatinized starch,functioning as an organic binder,filled the gaps between the gels,enhancing the cohesion and bonding coefficient of the material.Upon analyzing the post-blasting shooting effect diagram using the Split-Desktop software,it was determined that the utilization of the modified blast hole plugging material resulted in a decrease in the rate of coal fragmentation from 33.2%to 21.1%.This reduction exhibited a minimal error of 1.63%when compared to the field measurement,thereby providing further confirmation of the exceptional plugging capabilities of the modified material.This study significantly contributes to establishing a solid theoretical basis for enhancing the blasting efficiency of open pit mines and,in turn,enhancing their economic advantages.展开更多
Optimal sizing and allocation of distributed generators(DGs)have become essential computational challenges in improving the performance,efficiency,and reliability of electrical distribution networks.Despite extensive ...Optimal sizing and allocation of distributed generators(DGs)have become essential computational challenges in improving the performance,efficiency,and reliability of electrical distribution networks.Despite extensive research,existing approaches often face algorithmic limitations such as slow convergence,premature stagnation in local minima,or suboptimal accuracy in determining optimal DG placement and capacity.This study presents a comprehensive scientometric and systematic review of global research focused on computer-based modelling and algorithmic optimization for renewable DG sizing and placement.It integrates both quantitative and qualitative analyses of the scholarly landscape,mapping influential research domains,co-authorship structures,the articles’citation networks,keyword clusters,and international collaboration patterns.Moreover,the study classifies and evaluates the most prominent objective functions,key computational models and optimization algorithms,DG technologies,and strategic approaches employed in the field.The findings reveal that advanced algorithmic frameworks substantially enhance network stability,minimize real power losses,and improve voltage profiles under various operational constraints.This review serves as a foundational resource for researchers and practitioners,highlighting emerging algorithmic trends,modelling innovations,and data-driven methodologies that can guide future development of intelligent,optimization-based DG integration strategies in smart distribution systems.展开更多
The efficiency of businesses is often hindered by the challenges encountered in traditional Supply Chain Manage-ment(SCM),which is characterized by elevated risks due to inadequate accountability and transparency.To a...The efficiency of businesses is often hindered by the challenges encountered in traditional Supply Chain Manage-ment(SCM),which is characterized by elevated risks due to inadequate accountability and transparency.To address these challenges and improve operations in green manufacturing,optimization algorithms play a crucial role in supporting decision-making processes.In this study,we propose a solution to the green lot size optimization issue by leveraging bio-inspired algorithms,notably the Stork Optimization Algorithm(SOA).The SOA draws inspiration from the hunting and winter migration strategies employed by storks in nature.The theoretical framework of SOA is elaborated and mathematically modeled through two distinct phases:exploration,based on migration simulation,and exploitation,based on hunting strategy simulation.To tackle the green lot size optimization issue,our methodology involved gathering real-world data,which was then transformed into a simplified function with multiple constraints aimed at optimizing total costs and minimizing CO_(2) emissions.This function served as input for the SOA model.Subsequently,the SOA model was applied to identify the optimal lot size that strikes a balance between cost-effectiveness and sustainability.Through extensive experimentation,we compared the performance of SOA with twelve established metaheuristic algorithms,consistently demonstrating that SOA outperformed the others.This study’s contribution lies in providing an effective solution to the sustainable lot-size optimization dilemma,thereby reducing environmental impact and enhancing supply chain efficiency.The simulation findings underscore that SOA consistently achieves superior outcomes compared to existing optimization methodologies,making it a promising approach for green manufacturing and sustainable supply chain management.展开更多
The back frame structure of a large radio telescope is an important component supporting the reflecting surface,which is directly related to the surface precision.Its optimal design is of key significance for ensuring...The back frame structure of a large radio telescope is an important component supporting the reflecting surface,which is directly related to the surface precision.Its optimal design is of key significance for ensuring the surface precision and reducing structural weight.Two methods are constructed to optimize the cross-section size of the telescope back frame in this paper,the criterion method and the first-order optimization method.The criterion method is based on the Lagrangian multiplier method and Kuhn-Tucker condition.This method first establishes the mathematical model by taking the inner and outer radiuses of the back frame beams as the design variables,the structural weight as the constraint condition,and the structural compliance as the objective function,then derives the optimization criterion.The first-order optimization method takes the inner and outer radiuses of the beams as the design variables,the back frame RMS as the objective function,and the structural weight as the constraint condition.Comparison of RMS,structural stress uniformity and optimization efficiency shows that both algorithms can effectively reduce structural deformation and improve RMS,but the criterion method has relatively better result than the first-order method.展开更多
This paper employs mathematical modeling and algebraic approach to derive the optimal manufacturing batch size and number of shipment for a vendor-buyer integrated economic production quantity (EPQ) model with scrap. ...This paper employs mathematical modeling and algebraic approach to derive the optimal manufacturing batch size and number of shipment for a vendor-buyer integrated economic production quantity (EPQ) model with scrap. Unlike the conventional method by using differential calculus to determine replenishment lot size and optimal number of shipments for such an integrated system, this paper proposes a straightforward algebraic approach to replace the use of calculus on the total cost function for solving the optimal production- shipment policies. A simpler form for computing long-run average cost for such a vendor- buyer integrated EPQ problem is also provided.展开更多
An effective optimization method for the shape/sizing design of composite wing structures is presented with satisfying weight-cutting results. After decoupling, a kind of two-layer cycled optimization strategy suitabl...An effective optimization method for the shape/sizing design of composite wing structures is presented with satisfying weight-cutting results. After decoupling, a kind of two-layer cycled optimization strategy suitable for these integrated shape/sizing optimization is obtained. The uniform design method is used to provide sample points, and approximation models for shape design variables. And the results of sizing optimization are construct- ed with the quadratic response surface method （QRSM）. The complex method based on QRSM is used to opti- mize the shape design variables and the criteria method is adopted to optimize the sizing design variables. Compared with the conventional method, the proposed algorithm is more effective and feasible for solving complex composite optimization problems and has good efficiency in weight cutting.展开更多
With the help of FESEM, high resolution electron backscatter diffraction can investigate the grains/subgrains as small as a few tens of nanometers with a good angular resolution （~0.5°）. Fast development of EBS...With the help of FESEM, high resolution electron backscatter diffraction can investigate the grains/subgrains as small as a few tens of nanometers with a good angular resolution （~0.5°）. Fast development of EBSD speed （up to 1100 patterns per second） contributes that the number of published articles related to EBSD has been increasing sharply year by year. This paper reviews the sample preparation, parameters optimization and analysis of EBSD technique, emphasizing on the investigation of ultrafine grained and nanostructured materials processed by severe plastic deformation （SPD）. Detailed and practical parameters of the electropolishing, silica polishing and ion milling have been summarized. It is shown that ion milling is a real universal and promising polishing method for EBSD preparation of almost all materials. There exists a maximum value of indexed points as a function of step size. The optimum step size depends on the magnification and the board resolution/electronic step size. Grains/subgrains and texture, and grain boundary structure are readily obtained by EBSD. Strain and stored energy may be analyzed by EBSD.展开更多
According to bench test results of fuel economy and engine emission for thereal power-train system of EQ7200HEV car. a 3-D performance map oriented quasi-linear model isdeveloped for the configuration of the powertrai...According to bench test results of fuel economy and engine emission for thereal power-train system of EQ7200HEV car. a 3-D performance map oriented quasi-linear model isdeveloped for the configuration of the powertrain components such as internal combustion engine,traction electric motor, transmission, main retarder and energy storage unit. A genetic algorithmbased on optimization procedure is proposed and applied for parametric optimization of the keycomponents by consideration of requirements of some driving cycles. Through comparison of numericalresults obtained by the genetic algorithm with those by traditional optimization methods, it isshown that the present approach is quite effective and efficient in emission reduction and fueleconomy for the design of the hybrid electric car powertrain.展开更多
This work is concerned with a kind of optimal control problem for a size-structured biological population model.Well-posedness of the state system and an adjoint system are proved by means of Banach＇s fixed point the...This work is concerned with a kind of optimal control problem for a size-structured biological population model.Well-posedness of the state system and an adjoint system are proved by means of Banach＇s fixed point theorem.Existence and uniqueness of optimal control are shown by functional analytical approach.Optimality conditions describing the optimal strategy are established via tangent and normal cones technique.The results are of the first ones for this novel structure.展开更多
A light?weight design method of integrated structural topology and size co?optimization for the force?performance?structure of complex structural parts is presented in this paper. Firstly, the supporting function of a...A light?weight design method of integrated structural topology and size co?optimization for the force?performance?structure of complex structural parts is presented in this paper. Firstly, the supporting function of a complex structural part is built to map the force transmission, where the force exerted areas and constraints are considered as connecting structure and the structural configuration, to determine the part performance as well as the force routines. Then the connecting structure design model, aiming to optimize the static and dynamic performances on connection configuration, is developed, and the optimum design of the characteristic parameters is carried out by means of the collaborative optimization method, namely, the integrated structural topology optimization and size optimization. In this design model, the objective is to maximize the connecting stiffness. Based on the relationship between the force and the structural configuration of a part, the optimal force transmission routine that can meet the performance requirements is obtained using the structural topology optimization technology. Accordingly, the light?weight design of conceptual configuration for complex parts under multi?objective and multi?condition can be realized. Finally, based on the proposed collaborative optimization design method, the optimal performance and optimal structure of the complex parts with light weight are realized, and the reasonable structural unit configuration and size charac?teristic parameters are obtained. A bed structure of gantry?type machining center is designed by using the proposed light?weight structure design method in this paper, as an illustrative example. The bed after the design optimization is lighter 8% than original one, and the rail deformation is reduced by 5%. Moreover, the lightweight design of the bed is achieved with enhanced performance to show the effectiveness of the proposed method.展开更多
The interest in distributed generation has been increasing in recent years, especially due to technical devel- opment on generation systems that meet environmental and energy policy concerns. One of the most impor- ta...The interest in distributed generation has been increasing in recent years, especially due to technical devel- opment on generation systems that meet environmental and energy policy concerns. One of the most impor- tant distributed energy technologies is Combined Cooling, Heat and Power (CCHP) systems. CCHP is a small and self-contained electric, heating and cooling generation plant that can provide power for households, commercial or industrial facilities. It can reduce power loss and enhance service reliability in distribution systems. The proposed method in this paper determines the optimal size and operation of CCHP, auxiliary boiler and also heat storage unit as elements of an energy hub, for users by an integrated view of electricity and natural gas network. Authors apply cost and benefit analysis in the optimization. To confirm the proposed method, the optimum sizes of these elements are determined for a hotel in Tehran as a case study.展开更多
Garment online shopping has been accepted by more and more consumers in recent years. In online shopping, a buyer only chooses the garment size judged by his own experience without trying-on, so the selected garment m...Garment online shopping has been accepted by more and more consumers in recent years. In online shopping, a buyer only chooses the garment size judged by his own experience without trying-on, so the selected garment may not be the fittest one for the buyer due to the variety of body's figures. Thus, we propose a method of optimal selection of garment sizes for online shopping based on Analytic Hierarchy Process (AHP). The hierarchical structure model for optimal selection of garment sizes is structured and the fittest garment for a buyer is found by calculating the matching degrees between individual's measurements and the corresponding key-part values of ready-to-wear clothing sizes. In order to demonstrate its feasibility, we provide an example of selecting the fittest sizes of men's bottom. The result shows that the proposed method is useful in online clothing sales application.展开更多
Renewable energy sources(RESs)are considered to be reliable and green electric power generation sources.Photovoltaics(PVs)and wind turbines(WTs)are used to provide electricity in remote areas.Optimal sizing of hybrid ...Renewable energy sources(RESs)are considered to be reliable and green electric power generation sources.Photovoltaics(PVs)and wind turbines(WTs)are used to provide electricity in remote areas.Optimal sizing of hybrid RESs is a vital challenge in a stand-alone environment.The meta-heuristic algorithms proposed in the past are dependent on algorithm-specific parameters for achieving an optimal solution.This paper proposes a hybrid algorithm of Jaya and a teaching–learning-based optimization(TLBO)named the JLBO algorithm for the optimal unit sizing of a PV–WT–battery hybrid system to satisfy the consumer’s load at minimal total annual cost(TAC).The reliability of the system is considered by a maximum allowable loss of power supply probability(LPSPmax)concept.The results obtained from the JLBO algorithm are compared with the original Jaya,TLBO,and genetic algorithms.The JLBO results show superior performance in terms of TAC,and the PV–WT–battery hybrid system is found to be the most economical scenario.This system provides a cost-effective solution for all proposed LPSPmax values as compared with PV–battery and WT–battery systems.展开更多
A proton therapy system is a large medical device to treat tumors.Its gantry is of large structure and high precision.A new half-gantry was designed in the Shanghai Advanced Proton Therapy(SAPT)project.In this paper,t...A proton therapy system is a large medical device to treat tumors.Its gantry is of large structure and high precision.A new half-gantry was designed in the Shanghai Advanced Proton Therapy(SAPT)project.In this paper,the weight of gantry in design is reduced significantly by size and structure optimizations,to improve its cost-effectiveness,while guaranteeing the functions and precision.The processes of physics optimization,empirical design optimization,topological optimization and size optimization,together with factors of consideration,are described.The gantry weight is reduced by 30%,with the same precision.展开更多
In four—dimensional variational data assimilation (4DVAR) technology, how to calculate the optimal step size is always a very important and indeed difficult task. It is directly related to the computational efficienc...In four—dimensional variational data assimilation (4DVAR) technology, how to calculate the optimal step size is always a very important and indeed difficult task. It is directly related to the computational efficiency. In this research, a new method is proposed to calculate the optimal step size more effectively. Both nonlinear one—dimensional advection equation and two—dimensional inertial wave equation are used to test and compare the influence of different methods of the optimal step size calculations on the iteration steps, as well as the simulation results of 4DVAR processes. It is in evidence that the different methods have different influences. The calculating method is very important to determining whether the iteration is convergent or not and whether the convergence rate is large or small. If the calculating method of optimal step size is properly determined as demonstrated in this paper, then it can greatly enlarge the convergence rate and further greatly decrease the iteration steps. This research is meaningful since it not only makes an important improvement on 4DVAR theory, but also has useful practical application in improving the computational efficiency and saving the computational time. Key words 4DVAR - Optimal step size - Iterative convergence rate This work was supported by the National Natural Science Foundation under grants: 49735180 and 49675259, the “973 Project? CHERES(G 1998040907), the Project of Natural Science Foundation of Jiangsu Province(BK99020), and the Project Sponsored by the Scientific Research Foundation for the Returned Overseas Chinese Scholars.展开更多
We present a new least-mean-square algorithm of adaptive filtering to improve the signal to noise ratio for magneto-cardiography data collected with high-temperature SQUID-based magnetometers. By frequently adjusting ...We present a new least-mean-square algorithm of adaptive filtering to improve the signal to noise ratio for magneto-cardiography data collected with high-temperature SQUID-based magnetometers. By frequently adjusting the adaptive parameter a go systematic optimum values in the course of the programmed procedure, the convergence is accelerated with a highest speed and the minimum steady-state error is obtained simultaneously. This algorithm may be applied to eliminate other non-steady relevant noises as well.展开更多
In this paper,given the shortcomings of jellyfish search algorithmwith low search ability in the early stage and easy to fall into local optimal solution,this paper introduces adaptive weight function and elite strate...In this paper,given the shortcomings of jellyfish search algorithmwith low search ability in the early stage and easy to fall into local optimal solution,this paper introduces adaptive weight function and elite strategy,improving the global search scope in the early stage and the ability to refine the local development in the later stage.In the numerical study,the benchmark problem of dimensional optimization with a 10-bar truss structure and simultaneous dimensional shape optimization with a 15-bar truss structure is adopted,and the corresponding penalty method is used for constraint treatment.The test results show that the improved jellyfish search algorithm can provide better truss sections as well as weights.Because when the steel main truss of the large-span covered bridge is lifted,the site is limited and the large lifting equipment cannot enter the site,and the original structure does not meet the problem of stress concentration and large deformation of the bolt group,so the spreader is used to lift,and the improved jellyfish search algorithm is introduced into the design optimization of the spreader.The results show that the improved jellyfish algorithm can efficiently and accurately find out the optimal shape and weight of the spreader,and throughMidas Civil simulation,the spreader used canmeet the requirements of weight and safety.展开更多
文摘The optimization of civil engineering structures is critical for enhancing structural performance and material efficiency in engineering applications.Structural optimization approaches seek to determine the optimal design,by considering material performance,cost,and structural safety.The design approaches aim to reduce the built environment’s energy use and carbon emissions.This comprehensive review examines optimization techniques,including size,shape,topology,and multi-objective approaches,by integrating these methodologies.The trends and advancements that contribute to developing more efficient,cost-effective,and reliable structural designs were identified.The review also discusses emerging technologies,such as machine learning applications with different optimization techniques.Optimization of truss,frame,tensegrity,reinforced concrete,origami,pantographic,and adaptive structures are covered and discussed.Optimization techniques are explained,including metaheuristics,genetic algorithm,particle swarm,ant-colony,harmony search algorithm,and their applications with mentioned structure types.Linear and non-linear structures,including geometric and material nonlinearity,are distinguished.The role of optimization in active structures,structural design,seismic design,form-finding,and structural control is taken into account,and the most recent techniques and advancements are mentioned.
文摘With the development of satellite structure technology, more and more design parameters will affect its structural performance. It is desirable to obtain an optimal structure design with a minimum weight, including optimal configuration and sizes. The present paper aims to describe an optimization analysis for a satellite structure, including topology optimization and size optimization. Based on the homogenization method, the topology optimization is carried out for the main supporting frame of service module under given constraints and load conditions, and then the sensitivity analysis is made of 15 structural size parameters of the whole satellite and the optimal sizes are obtained. The numerical result shows that the present optimization design method is very effective.
基金National Natural Science Foundation of China(No.51078068)the Fundamental Research Funds for the Central Universities,China(No.11D11314)
文摘An irreversible model of high temperature solid oxide fuel cells( SOFCs) working at steady-state is developed,devoted to performing the optimization with regard to two objectives:minimization of the fuel cell size and maximization of the system efficiency. The performance characteristics of the system are analyzed in details, illustrated by the curves of power density,efficiency and voltage. Genetic algorithm is used to perform the multi-objective optimization with four decision variables: the operating pressure, the fuel stoichiometric ratio, the air stoichiometric ratio and the current density. A Pareto set giving a quantative description of the trade-off between the two objectives is used to analyze the results. Optimization results prove the existence of optimal designs region for a 50 kW system with efficiency from 43% corresponding to a 14. 6 m2 electrolyte area to 48% corresponding to a 25.4 m2 electrolyte area. The SOFC model used is general and the optimization results could be applied to the practical SOFC design.
基金financially supported by the National Natural Science Foundation of China (No. 52174131)
文摘This research proposes the utilization of a geopolymer-based blasting sealing material to improve the profitability of coal sales and reduce the rate of coal fragmentation during blasting in open pit mines.The study first focused on optimizing the strength of the sealant material and reducing curing time.This was achieved by regulating the slag doping and sodium silicate solution modulus.The findings demonstrated that increasing slag content and improving the material resulted in an early rise in strength while increasing the modulus of the sodium silicate solution extended the curing time.The slag doping level was fixed at 80 g,and the sodium silicate solution modulus was set at 1.5.To achieve a strength of 3.12 MPa,the water/gel ratio was set at 0.5.The initial setting time was determined to be 33 min,meeting the required field test duration.Secondly,the strength requirements for field implementation were assessed by simulating the action time and force destruction process of the sealing material during blasting using ANSYS/LS-DYNA software.The results indicated that the modified material meets these requirements.Finally,the Shengli Open Pit Coal Mine served as the site for the field test.It was observed that the hole-sealing material’s hydration reaction created a laminated and flocculated gel inside it.This enhanced the density of the modified material.Additionally,the pregelatinized starch,functioning as an organic binder,filled the gaps between the gels,enhancing the cohesion and bonding coefficient of the material.Upon analyzing the post-blasting shooting effect diagram using the Split-Desktop software,it was determined that the utilization of the modified blast hole plugging material resulted in a decrease in the rate of coal fragmentation from 33.2%to 21.1%.This reduction exhibited a minimal error of 1.63%when compared to the field measurement,thereby providing further confirmation of the exceptional plugging capabilities of the modified material.This study significantly contributes to establishing a solid theoretical basis for enhancing the blasting efficiency of open pit mines and,in turn,enhancing their economic advantages.
基金supported and funded by the Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University(IMSIU)(grant number:IMSIU-DDRSP2503)。
文摘Optimal sizing and allocation of distributed generators(DGs)have become essential computational challenges in improving the performance,efficiency,and reliability of electrical distribution networks.Despite extensive research,existing approaches often face algorithmic limitations such as slow convergence,premature stagnation in local minima,or suboptimal accuracy in determining optimal DG placement and capacity.This study presents a comprehensive scientometric and systematic review of global research focused on computer-based modelling and algorithmic optimization for renewable DG sizing and placement.It integrates both quantitative and qualitative analyses of the scholarly landscape,mapping influential research domains,co-authorship structures,the articles’citation networks,keyword clusters,and international collaboration patterns.Moreover,the study classifies and evaluates the most prominent objective functions,key computational models and optimization algorithms,DG technologies,and strategic approaches employed in the field.The findings reveal that advanced algorithmic frameworks substantially enhance network stability,minimize real power losses,and improve voltage profiles under various operational constraints.This review serves as a foundational resource for researchers and practitioners,highlighting emerging algorithmic trends,modelling innovations,and data-driven methodologies that can guide future development of intelligent,optimization-based DG integration strategies in smart distribution systems.
基金This research is funded by the Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan,Grant No.AP19674517.
文摘The efficiency of businesses is often hindered by the challenges encountered in traditional Supply Chain Manage-ment(SCM),which is characterized by elevated risks due to inadequate accountability and transparency.To address these challenges and improve operations in green manufacturing,optimization algorithms play a crucial role in supporting decision-making processes.In this study,we propose a solution to the green lot size optimization issue by leveraging bio-inspired algorithms,notably the Stork Optimization Algorithm(SOA).The SOA draws inspiration from the hunting and winter migration strategies employed by storks in nature.The theoretical framework of SOA is elaborated and mathematically modeled through two distinct phases:exploration,based on migration simulation,and exploitation,based on hunting strategy simulation.To tackle the green lot size optimization issue,our methodology involved gathering real-world data,which was then transformed into a simplified function with multiple constraints aimed at optimizing total costs and minimizing CO_(2) emissions.This function served as input for the SOA model.Subsequently,the SOA model was applied to identify the optimal lot size that strikes a balance between cost-effectiveness and sustainability.Through extensive experimentation,we compared the performance of SOA with twelve established metaheuristic algorithms,consistently demonstrating that SOA outperformed the others.This study’s contribution lies in providing an effective solution to the sustainable lot-size optimization dilemma,thereby reducing environmental impact and enhancing supply chain efficiency.The simulation findings underscore that SOA consistently achieves superior outcomes compared to existing optimization methodologies,making it a promising approach for green manufacturing and sustainable supply chain management.
文摘The back frame structure of a large radio telescope is an important component supporting the reflecting surface,which is directly related to the surface precision.Its optimal design is of key significance for ensuring the surface precision and reducing structural weight.Two methods are constructed to optimize the cross-section size of the telescope back frame in this paper,the criterion method and the first-order optimization method.The criterion method is based on the Lagrangian multiplier method and Kuhn-Tucker condition.This method first establishes the mathematical model by taking the inner and outer radiuses of the back frame beams as the design variables,the structural weight as the constraint condition,and the structural compliance as the objective function,then derives the optimization criterion.The first-order optimization method takes the inner and outer radiuses of the beams as the design variables,the back frame RMS as the objective function,and the structural weight as the constraint condition.Comparison of RMS,structural stress uniformity and optimization efficiency shows that both algorithms can effectively reduce structural deformation and improve RMS,but the criterion method has relatively better result than the first-order method.
文摘This paper employs mathematical modeling and algebraic approach to derive the optimal manufacturing batch size and number of shipment for a vendor-buyer integrated economic production quantity (EPQ) model with scrap. Unlike the conventional method by using differential calculus to determine replenishment lot size and optimal number of shipments for such an integrated system, this paper proposes a straightforward algebraic approach to replace the use of calculus on the total cost function for solving the optimal production- shipment policies. A simpler form for computing long-run average cost for such a vendor- buyer integrated EPQ problem is also provided.
文摘An effective optimization method for the shape/sizing design of composite wing structures is presented with satisfying weight-cutting results. After decoupling, a kind of two-layer cycled optimization strategy suitable for these integrated shape/sizing optimization is obtained. The uniform design method is used to provide sample points, and approximation models for shape design variables. And the results of sizing optimization are construct- ed with the quadratic response surface method （QRSM）. The complex method based on QRSM is used to opti- mize the shape design variables and the criteria method is adopted to optimize the sizing design variables. Compared with the conventional method, the proposed algorithm is more effective and feasible for solving complex composite optimization problems and has good efficiency in weight cutting.
基金Project (192450/I30) supported by the Norwegian Research Council under the Strategic University Program
文摘With the help of FESEM, high resolution electron backscatter diffraction can investigate the grains/subgrains as small as a few tens of nanometers with a good angular resolution （~0.5°）. Fast development of EBSD speed （up to 1100 patterns per second） contributes that the number of published articles related to EBSD has been increasing sharply year by year. This paper reviews the sample preparation, parameters optimization and analysis of EBSD technique, emphasizing on the investigation of ultrafine grained and nanostructured materials processed by severe plastic deformation （SPD）. Detailed and practical parameters of the electropolishing, silica polishing and ion milling have been summarized. It is shown that ion milling is a real universal and promising polishing method for EBSD preparation of almost all materials. There exists a maximum value of indexed points as a function of step size. The optimum step size depends on the magnification and the board resolution/electronic step size. Grains/subgrains and texture, and grain boundary structure are readily obtained by EBSD. Strain and stored energy may be analyzed by EBSD.
文摘According to bench test results of fuel economy and engine emission for thereal power-train system of EQ7200HEV car. a 3-D performance map oriented quasi-linear model isdeveloped for the configuration of the powertrain components such as internal combustion engine,traction electric motor, transmission, main retarder and energy storage unit. A genetic algorithmbased on optimization procedure is proposed and applied for parametric optimization of the keycomponents by consideration of requirements of some driving cycles. Through comparison of numericalresults obtained by the genetic algorithm with those by traditional optimization methods, it isshown that the present approach is quite effective and efficient in emission reduction and fueleconomy for the design of the hybrid electric car powertrain.
基金Supported by the ZPNSFC (LY12A01023)the National Natural Science Foundation of China (11271104,11061017)
文摘This work is concerned with a kind of optimal control problem for a size-structured biological population model.Well-posedness of the state system and an adjoint system are proved by means of Banach＇s fixed point theorem.Existence and uniqueness of optimal control are shown by functional analytical approach.Optimality conditions describing the optimal strategy are established via tangent and normal cones technique.The results are of the first ones for this novel structure.
基金Supported by National Science and Technology Major Project(Grant No.2015ZX04014021)
文摘A light?weight design method of integrated structural topology and size co?optimization for the force?performance?structure of complex structural parts is presented in this paper. Firstly, the supporting function of a complex structural part is built to map the force transmission, where the force exerted areas and constraints are considered as connecting structure and the structural configuration, to determine the part performance as well as the force routines. Then the connecting structure design model, aiming to optimize the static and dynamic performances on connection configuration, is developed, and the optimum design of the characteristic parameters is carried out by means of the collaborative optimization method, namely, the integrated structural topology optimization and size optimization. In this design model, the objective is to maximize the connecting stiffness. Based on the relationship between the force and the structural configuration of a part, the optimal force transmission routine that can meet the performance requirements is obtained using the structural topology optimization technology. Accordingly, the light?weight design of conceptual configuration for complex parts under multi?objective and multi?condition can be realized. Finally, based on the proposed collaborative optimization design method, the optimal performance and optimal structure of the complex parts with light weight are realized, and the reasonable structural unit configuration and size charac?teristic parameters are obtained. A bed structure of gantry?type machining center is designed by using the proposed light?weight structure design method in this paper, as an illustrative example. The bed after the design optimization is lighter 8% than original one, and the rail deformation is reduced by 5%. Moreover, the lightweight design of the bed is achieved with enhanced performance to show the effectiveness of the proposed method.
文摘The interest in distributed generation has been increasing in recent years, especially due to technical devel- opment on generation systems that meet environmental and energy policy concerns. One of the most impor- tant distributed energy technologies is Combined Cooling, Heat and Power (CCHP) systems. CCHP is a small and self-contained electric, heating and cooling generation plant that can provide power for households, commercial or industrial facilities. It can reduce power loss and enhance service reliability in distribution systems. The proposed method in this paper determines the optimal size and operation of CCHP, auxiliary boiler and also heat storage unit as elements of an energy hub, for users by an integrated view of electricity and natural gas network. Authors apply cost and benefit analysis in the optimization. To confirm the proposed method, the optimum sizes of these elements are determined for a hotel in Tehran as a case study.
基金The Programfor New Century Excellent Talents in University from Ministry of Education of China(No.NCET-04-415)the Cultivation Fund of the Key Scientific and Technical Innovation Project from Ministry of Education of China(No.706024)International Science Cooperation Foundation of Shanghai,China(No.061307041)
文摘Garment online shopping has been accepted by more and more consumers in recent years. In online shopping, a buyer only chooses the garment size judged by his own experience without trying-on, so the selected garment may not be the fittest one for the buyer due to the variety of body's figures. Thus, we propose a method of optimal selection of garment sizes for online shopping based on Analytic Hierarchy Process (AHP). The hierarchical structure model for optimal selection of garment sizes is structured and the fittest garment for a buyer is found by calculating the matching degrees between individual's measurements and the corresponding key-part values of ready-to-wear clothing sizes. In order to demonstrate its feasibility, we provide an example of selecting the fittest sizes of men's bottom. The result shows that the proposed method is useful in online clothing sales application.
文摘Renewable energy sources(RESs)are considered to be reliable and green electric power generation sources.Photovoltaics(PVs)and wind turbines(WTs)are used to provide electricity in remote areas.Optimal sizing of hybrid RESs is a vital challenge in a stand-alone environment.The meta-heuristic algorithms proposed in the past are dependent on algorithm-specific parameters for achieving an optimal solution.This paper proposes a hybrid algorithm of Jaya and a teaching–learning-based optimization(TLBO)named the JLBO algorithm for the optimal unit sizing of a PV–WT–battery hybrid system to satisfy the consumer’s load at minimal total annual cost(TAC).The reliability of the system is considered by a maximum allowable loss of power supply probability(LPSPmax)concept.The results obtained from the JLBO algorithm are compared with the original Jaya,TLBO,and genetic algorithms.The JLBO results show superior performance in terms of TAC,and the PV–WT–battery hybrid system is found to be the most economical scenario.This system provides a cost-effective solution for all proposed LPSPmax values as compared with PV–battery and WT–battery systems.
基金Supported by the Shanghai Advanced Proton Therapy project(No.Y331061061)
文摘A proton therapy system is a large medical device to treat tumors.Its gantry is of large structure and high precision.A new half-gantry was designed in the Shanghai Advanced Proton Therapy(SAPT)project.In this paper,the weight of gantry in design is reduced significantly by size and structure optimizations,to improve its cost-effectiveness,while guaranteeing the functions and precision.The processes of physics optimization,empirical design optimization,topological optimization and size optimization,together with factors of consideration,are described.The gantry weight is reduced by 30%,with the same precision.
文摘In four—dimensional variational data assimilation (4DVAR) technology, how to calculate the optimal step size is always a very important and indeed difficult task. It is directly related to the computational efficiency. In this research, a new method is proposed to calculate the optimal step size more effectively. Both nonlinear one—dimensional advection equation and two—dimensional inertial wave equation are used to test and compare the influence of different methods of the optimal step size calculations on the iteration steps, as well as the simulation results of 4DVAR processes. It is in evidence that the different methods have different influences. The calculating method is very important to determining whether the iteration is convergent or not and whether the convergence rate is large or small. If the calculating method of optimal step size is properly determined as demonstrated in this paper, then it can greatly enlarge the convergence rate and further greatly decrease the iteration steps. This research is meaningful since it not only makes an important improvement on 4DVAR theory, but also has useful practical application in improving the computational efficiency and saving the computational time. Key words 4DVAR - Optimal step size - Iterative convergence rate This work was supported by the National Natural Science Foundation under grants: 49735180 and 49675259, the “973 Project? CHERES(G 1998040907), the Project of Natural Science Foundation of Jiangsu Province(BK99020), and the Project Sponsored by the Scientific Research Foundation for the Returned Overseas Chinese Scholars.
文摘We present a new least-mean-square algorithm of adaptive filtering to improve the signal to noise ratio for magneto-cardiography data collected with high-temperature SQUID-based magnetometers. By frequently adjusting the adaptive parameter a go systematic optimum values in the course of the programmed procedure, the convergence is accelerated with a highest speed and the minimum steady-state error is obtained simultaneously. This algorithm may be applied to eliminate other non-steady relevant noises as well.
基金the National Natural Science Foundation of China(Grant No.51305372)the Open Fund Project of the Transportation Infrastructure Intelligent Management and Maintenance Engineering Technology Center of Xiamen City(Grant No.TCIMI201803)the Project of the 2011 Collaborative Innovation Center of Fujian Province(Grant No.2016BJC019).
文摘In this paper,given the shortcomings of jellyfish search algorithmwith low search ability in the early stage and easy to fall into local optimal solution,this paper introduces adaptive weight function and elite strategy,improving the global search scope in the early stage and the ability to refine the local development in the later stage.In the numerical study,the benchmark problem of dimensional optimization with a 10-bar truss structure and simultaneous dimensional shape optimization with a 15-bar truss structure is adopted,and the corresponding penalty method is used for constraint treatment.The test results show that the improved jellyfish search algorithm can provide better truss sections as well as weights.Because when the steel main truss of the large-span covered bridge is lifted,the site is limited and the large lifting equipment cannot enter the site,and the original structure does not meet the problem of stress concentration and large deformation of the bolt group,so the spreader is used to lift,and the improved jellyfish search algorithm is introduced into the design optimization of the spreader.The results show that the improved jellyfish algorithm can efficiently and accurately find out the optimal shape and weight of the spreader,and throughMidas Civil simulation,the spreader used canmeet the requirements of weight and safety.
