Henan Pingdingshan No.10 mine is prone to both coal and gas outbursts.The E_(9-10)coal seam is the main coal-producing seam but has poor quality ventilation,thus making it relatively difficult for gas extraction.The F...Henan Pingdingshan No.10 mine is prone to both coal and gas outbursts.The E_(9-10)coal seam is the main coal-producing seam but has poor quality ventilation,thus making it relatively difficult for gas extraction.The F_(15)coal seam,at its lower section,is not prone to coal and gas outbursts.The average seam separation distance of 150 m is greater than the upper limit for underside protective seam mining.Based on borehole imaging technology for field exploration of coal and rock fracture characteristics and discrete element numerical simulation,we have studied the evolution laws and distribution characteristics of the coal and rock fissure field between these two coal seams.By analysis of the influential effect of group F coal mining on the E_(9-10)coal seam,we have shown that a number of small fissures also develop in the area some 150 m above the overlying strata.The width and number of the fissures also increase with the extent of mining activity.Most of the fissures develop at a low angle or even parallel to the strata.The results show that the mining of the F_(15)coal seam has the effect of improving the permeability of the E_(9-10)coal seam.展开更多
In order to ensure safe mining and reduce surface damage in shallow multi-seam mining,the failure characteristics of interburden strata with different coal pillars offset distances between pillars in the upper and low...In order to ensure safe mining and reduce surface damage in shallow multi-seam mining,the failure characteristics of interburden strata with different coal pillars offset distances between pillars in the upper and lower seams,the distribution characteristics of stress concentration in coal pillars,and the development characteristics of stratum cracks and subsidence were investigated by physical and UDEC2D simulation.Meanwhile,the effect of different coal pillar offset distances on stress concentration of coal pillar and development of stratum cracks were studied.Based on those results,a formula for safe mining and reducing surface damage was established,which provided a theoretical basis for safe and environmentally friendly mining in shallow multi-seam.According to the results,the optimal coal pillar offset distance(the side to side horizontal distance of the upper and lower coal pillars)between the upper and lower coal seams was developed to reduce the stress concentration of coal pillars and surface damage.The results of this study have been applied in Ningtiaota coal mine and have achieved good results in safe and environmentally friendly mining.展开更多
Based on characteristic of the associated mining of multi-coal seam and the engineering geological characteristics of overburden,the mining impact pattern of multi- seam mining and the dynamic fracture mechanism of ov...Based on characteristic of the associated mining of multi-coal seam and the engineering geological characteristics of overburden,the mining impact pattern of multi- seam mining and the dynamic fracture mechanism of overburden were characterized by applying the engineering geological mechanical model test.The related strata movement parameters and influence area of multi-seam mining were obtained,the strike boundary angle is 61°,the full extraction coefficient is 0.93,the greatest subsidence angle is 81°,the horizontal movement factor is 0.38,the deviation of inflection point/mining deep is 0.11. The development height of caving zone and water flowing fractured zone of multi-seam mining were calculated,is 32 m and 81.5 m separatly.The assess of influence degree of coal layer safety mining is that,there exists the possibility of water and sand inflow when mining,some messures for mine water prevention and control should be used,and the mining thickness should be local strictly limit.展开更多
Accurate prediction of surface subsidence due to the extraction of underground coal seams is a significant challenge in geotechnical engineering. This task is further compounded by the growing trend for coal to be ext...Accurate prediction of surface subsidence due to the extraction of underground coal seams is a significant challenge in geotechnical engineering. This task is further compounded by the growing trend for coal to be extracted from seams either above or below previously extracted coal seams, a practice known as multiseam mining. In order to accurately predict the subsidence above single and multi-seam longwall panels using numerical methods, constitutive laws need to appropriately represent the mechanical behaviour of coal measure strata. The choice of the most appropriate model is not always straightforward. This paper compares predictions of surface subsidence obtained using the finite element method, considering a range of well-known constitutive models. The results show that more sophisticated and numerically taxing constitutive laws do not necessarily lead to more accurate predictions of subsidence when compared to field measurements. The advantages and limitations of using each particular constitutive law are discussed. A comparison of the numerical predictions and field measurements of surface subsidence is also provided.展开更多
Surrounding rock control in the overlying protective coal seam is a challenging topic for de-stressed mining of multi-seamed coal.Current research findings on roadway control were used in the design of a physical mode...Surrounding rock control in the overlying protective coal seam is a challenging topic for de-stressed mining of multi-seamed coal.Current research findings on roadway control were used in the design of a physical model of a complex textured roof having a varying thickness.The model was used to study roadway instability and collapse caused by dynamic pressure.The results show that when the thickness of the roof exceeds the bolted depth the roadway security is least and the roof has the greatest possibility for collapse.Numerical simulations were also carried out to study stress redistribution before and after roadway excavation during underlying protective seam mining.The evolution of roadway displacement and fracture,as affected by support methods,has been well studied.A series of support principles and technologies for mining affected roadways has been proposed after demonstration of successful practical application in the Huainan Mines.These principles and technologies are of extended value to deep coal mining support in China.展开更多
Based on the characteristics of the strong volatility of physical property in vertical direction, high gas content, high resource abundance and large exploitation potentiality of coal reservoir in Bide-Santang basin o...Based on the characteristics of the strong volatility of physical property in vertical direction, high gas content, high resource abundance and large exploitation potentiality of coal reservoir in Bide-Santang basin of Zhina coal field, we study the generation mechanism of interlayer interference, propagation rules of reservoir pressure drop and influencing factors of gas productivity in CBM multi-seam drainage in the paper. On the basis of the actual production data of X-2 well of Zhucang syncline in Bide-Santang basin,by simulating the gas production process of a CBM well under the condition of multiple seam with COMET3 numerical simulation software, we analyze the influencing factors of gas productivity during the process of multi-seam drainage, and illuminate the interlayer interference mechanism of multiseam drainage. The results show that permeability, reservoir pressure gradient, critical desorption pressure and fluid supply capacity of stratum have great influence on gas productivity of multi-seam drainage while coal thickness has little influence on it. Permeability, reservoir pressure gradient and fluid supply capacity of stratum affect the propagation velocity of reservoir pressure drop and thereby affect the final gas productivity. Moreover, the influence of critical desorption pressure on gas productivity of multiseam drainage is reflected in the gas breakthrough time and effective desorption area.展开更多
To explore the impact of lateral stress concentration in interlayer rock stratum on the exploitation of protected coal seam, a field experiment was carried out in a multi-seam mining structure. Lateral stress redistri...To explore the impact of lateral stress concentration in interlayer rock stratum on the exploitation of protected coal seam, a field experiment was carried out in a multi-seam mining structure. Lateral stress redistribution and interlayer rock failure behavior were surveyed. Then an assistant numerical investigation was implemented to evolve the effect of liberated seam mining and its influence on stress reconstruction in surrounding rock mass. The cause of lateral stress concentration and its impact were discussed finally. Key findings turn out that a certain lateral stress increases in interlayer rock stratum and concentrates on its lower region. Lateral stress concentration and interlayer rock failure are interactional. The former is an inducing factor of the latter;the latter promotes the increase of concentration degree. Extent of lateral stress concentration increases to the maximum as seam distance is about 50 m. But the efficacy of liberated seam mining decreases as the seam spacing gets larger. Protected seam mining is then classified based upon the impact of lateral stress concentration, which helps to prevent the rock burst hazard and then to achieve a reliable mining in deep mines.展开更多
基金financially supported by the State Key Basic Research Program of China(No.2011CB201203)the State Key Special Program of China(No.2011ZX05040-001-005)the National Natural Science Foundation of China(No.51374256)
文摘Henan Pingdingshan No.10 mine is prone to both coal and gas outbursts.The E_(9-10)coal seam is the main coal-producing seam but has poor quality ventilation,thus making it relatively difficult for gas extraction.The F_(15)coal seam,at its lower section,is not prone to coal and gas outbursts.The average seam separation distance of 150 m is greater than the upper limit for underside protective seam mining.Based on borehole imaging technology for field exploration of coal and rock fracture characteristics and discrete element numerical simulation,we have studied the evolution laws and distribution characteristics of the coal and rock fissure field between these two coal seams.By analysis of the influential effect of group F coal mining on the E_(9-10)coal seam,we have shown that a number of small fissures also develop in the area some 150 m above the overlying strata.The width and number of the fissures also increase with the extent of mining activity.Most of the fissures develop at a low angle or even parallel to the strata.The results show that the mining of the F_(15)coal seam has the effect of improving the permeability of the E_(9-10)coal seam.
基金The article was funded by the National Natural Science Foundation of China(Nos.51674190 and 52074211)the Natural Science Basic Research Program of Shaanxi(Nos.2019JQ-798 and 2019JLP-08).The authors also thank the reviewers for their patient work.
文摘In order to ensure safe mining and reduce surface damage in shallow multi-seam mining,the failure characteristics of interburden strata with different coal pillars offset distances between pillars in the upper and lower seams,the distribution characteristics of stress concentration in coal pillars,and the development characteristics of stratum cracks and subsidence were investigated by physical and UDEC2D simulation.Meanwhile,the effect of different coal pillar offset distances on stress concentration of coal pillar and development of stratum cracks were studied.Based on those results,a formula for safe mining and reducing surface damage was established,which provided a theoretical basis for safe and environmentally friendly mining in shallow multi-seam.According to the results,the optimal coal pillar offset distance(the side to side horizontal distance of the upper and lower coal pillars)between the upper and lower coal seams was developed to reduce the stress concentration of coal pillars and surface damage.The results of this study have been applied in Ningtiaota coal mine and have achieved good results in safe and environmentally friendly mining.
基金the National Natural Science Foundation of China(40372123)
文摘Based on characteristic of the associated mining of multi-coal seam and the engineering geological characteristics of overburden,the mining impact pattern of multi- seam mining and the dynamic fracture mechanism of overburden were characterized by applying the engineering geological mechanical model test.The related strata movement parameters and influence area of multi-seam mining were obtained,the strike boundary angle is 61°,the full extraction coefficient is 0.93,the greatest subsidence angle is 81°,the horizontal movement factor is 0.38,the deviation of inflection point/mining deep is 0.11. The development height of caving zone and water flowing fractured zone of multi-seam mining were calculated,is 32 m and 81.5 m separatly.The assess of influence degree of coal layer safety mining is that,there exists the possibility of water and sand inflow when mining,some messures for mine water prevention and control should be used,and the mining thickness should be local strictly limit.
基金supported by the Australian Research Council in the form of a Discovery Grant and funding through the Centre of Excellence for Geotechnical Scienceand Engineering
文摘Accurate prediction of surface subsidence due to the extraction of underground coal seams is a significant challenge in geotechnical engineering. This task is further compounded by the growing trend for coal to be extracted from seams either above or below previously extracted coal seams, a practice known as multiseam mining. In order to accurately predict the subsidence above single and multi-seam longwall panels using numerical methods, constitutive laws need to appropriately represent the mechanical behaviour of coal measure strata. The choice of the most appropriate model is not always straightforward. This paper compares predictions of surface subsidence obtained using the finite element method, considering a range of well-known constitutive models. The results show that more sophisticated and numerically taxing constitutive laws do not necessarily lead to more accurate predictions of subsidence when compared to field measurements. The advantages and limitations of using each particular constitutive law are discussed. A comparison of the numerical predictions and field measurements of surface subsidence is also provided.
基金Financial support for this work,provided by the National Key Technology R&D Program(No.2007BAK28B00)the National Natural Science Foundation for the Youth of China(No.50904064)+2 种基金the Research Fund for the Youth of China University of Mining & Technology(No.2008A004)the State Key Laboratory of Coal Resources and Safe Mining,CUMT(No.SKLCRSM09X03)the Research Fund of the State Key Laboratory of Coal Resources and Mine Safety,CUMT(No.08KF10)
文摘Surrounding rock control in the overlying protective coal seam is a challenging topic for de-stressed mining of multi-seamed coal.Current research findings on roadway control were used in the design of a physical model of a complex textured roof having a varying thickness.The model was used to study roadway instability and collapse caused by dynamic pressure.The results show that when the thickness of the roof exceeds the bolted depth the roadway security is least and the roof has the greatest possibility for collapse.Numerical simulations were also carried out to study stress redistribution before and after roadway excavation during underlying protective seam mining.The evolution of roadway displacement and fracture,as affected by support methods,has been well studied.A series of support principles and technologies for mining affected roadways has been proposed after demonstration of successful practical application in the Huainan Mines.These principles and technologies are of extended value to deep coal mining support in China.
基金supported by the National Major Special Project of Science and Technology of China (No.2011ZX05034)the Innovation Projects of University Graduates in Jiangsu Province (No.CXLX13_948)+1 种基金the National Natural Science Foundation of China (No.41272178)the Natural Science Foundation of Hunan Province (No.2016JJ4031)
文摘Based on the characteristics of the strong volatility of physical property in vertical direction, high gas content, high resource abundance and large exploitation potentiality of coal reservoir in Bide-Santang basin of Zhina coal field, we study the generation mechanism of interlayer interference, propagation rules of reservoir pressure drop and influencing factors of gas productivity in CBM multi-seam drainage in the paper. On the basis of the actual production data of X-2 well of Zhucang syncline in Bide-Santang basin,by simulating the gas production process of a CBM well under the condition of multiple seam with COMET3 numerical simulation software, we analyze the influencing factors of gas productivity during the process of multi-seam drainage, and illuminate the interlayer interference mechanism of multiseam drainage. The results show that permeability, reservoir pressure gradient, critical desorption pressure and fluid supply capacity of stratum have great influence on gas productivity of multi-seam drainage while coal thickness has little influence on it. Permeability, reservoir pressure gradient and fluid supply capacity of stratum affect the propagation velocity of reservoir pressure drop and thereby affect the final gas productivity. Moreover, the influence of critical desorption pressure on gas productivity of multiseam drainage is reflected in the gas breakthrough time and effective desorption area.
文摘To explore the impact of lateral stress concentration in interlayer rock stratum on the exploitation of protected coal seam, a field experiment was carried out in a multi-seam mining structure. Lateral stress redistribution and interlayer rock failure behavior were surveyed. Then an assistant numerical investigation was implemented to evolve the effect of liberated seam mining and its influence on stress reconstruction in surrounding rock mass. The cause of lateral stress concentration and its impact were discussed finally. Key findings turn out that a certain lateral stress increases in interlayer rock stratum and concentrates on its lower region. Lateral stress concentration and interlayer rock failure are interactional. The former is an inducing factor of the latter;the latter promotes the increase of concentration degree. Extent of lateral stress concentration increases to the maximum as seam distance is about 50 m. But the efficacy of liberated seam mining decreases as the seam spacing gets larger. Protected seam mining is then classified based upon the impact of lateral stress concentration, which helps to prevent the rock burst hazard and then to achieve a reliable mining in deep mines.
