Hester-Dendy (HD) multi-plate samplers have been widely used by state and federal government agencies for bioassessment of water quality through use of macroinvertebrate community data. To help guide remediation and r...Hester-Dendy (HD) multi-plate samplers have been widely used by state and federal government agencies for bioassessment of water quality through use of macroinvertebrate community data. To help guide remediation and restoration efforts at the Niagara River Great Lakes Area of Concern site, a multi-agency study was conducted in 2014 to assess the contribution of seven major urban tributaries on the US side of the river toward the impairment of the Niagara River. As part of this study, macroinvertebrate communities were sampled using two co-located versions of HD samplers: one version used by the New York State Department of Environmental Conservation (NYSDEC) and another by the US Environmental Protection Agency Office of Research and Development. Samplers were deployed in tributaries in highly developed watersheds with high percent impervious surface. The two sampling methods varied in terms of number and size of plates, between-plate spacing, and deployment method. Comparison of the similarity/grouping of communities with multivariate ordination techniques, Nonmetric Multidimensional Scaling and Multi-Response Permutation Procedure, showed that both methods were able to detect differences in communities at stations, despite some grouping by month and method. The indices and metrics derived from the two HD methods were found to give comparable but not identical assessments of water quality. Despite their differences, the methods were robust with respect to water quality categories derived from indices used nationally (HBI) and by NY state (BAP). For the common richness metrics, total taxa and EPT richness, there was no statistical difference between means from 3 samplings. Some metrics, especially percent tolerant collector-gatherer individuals, did show significant differences at certain stations. Indicator Species Analysis showed some taxa associated with each method. The observed community differences were thought mostly due to the difference in sampler deployment position. .展开更多
The purpose of this study is to verify an 1D multi-plate heat-transfer model estimating the temperature distribution on the interface between polymer electrolyte membrane and catalyst layer at cathode in single cell o...The purpose of this study is to verify an 1D multi-plate heat-transfer model estimating the temperature distribution on the interface between polymer electrolyte membrane and catalyst layer at cathode in single cell of polymer electrolyte fuel cell, which is named as reaction surface in this study, with a 3D numerical simulation model solving many governing equations on the coupling phenomena in the cell. The results from both models/simulations agreed well. The effects of initial operation temperature, flow rate, and relative humidity of supply gas on temperature distribution on the reaction surface were also investigated. It was found in both 1D and 3D simulations that, the temperature rise （i.e., Treact-Tini） of the reaction surface from initial operation temperature at 70℃ was higher than that at 80℃ irrespective of flow rate of supply gas. The effect of relative humidity of supply gas on Treact- Tini near the inlet of the cell was small. Compared to the previous studies conducted under the similar operation conditions, the Treact - Tini calculated by 1D multi-plate heat-transfer model in this study as well as numerical simulation using 3D model was reasonable.展开更多
Heat exchanger networks(HENs)in separated plants can be simultaneously synthesized through process streams directly or intermediate fluids indirectly.However,the direct and indirect methods are studied separately in m...Heat exchanger networks(HENs)in separated plants can be simultaneously synthesized through process streams directly or intermediate fluids indirectly.However,the direct and indirect methods are studied separately in most existing researches.As the result,conventional designs are probably suboptimal,because optimal solutions may call for hybrid approach wherein direct and indirect integration methods are used synchronously.To circumvent this drawback aforementioned,we propose in this research a novel methodology to synthesize multi-plant HENs considering both direct and indirect approaches.The methodology employs a novel superstructure covering most potential topologies for both interplant and intra-plant heat integration.We also take into account multiple kinds of intermediate fluids for indirect integration and this has not been fully addressed in previous research.A mixed-integer nonlinear programming(MINLP)is formulated to optimize multi-plant HENs involving indirect and direct methods.One example from existing literature and one industrial problem are solved to demonstrate the methodology’s capability.展开更多
Since the 1970s, the studies on the geography of enterprise have become increasingly concerned with the spatial evolution of an enterprises in the West developed countries. However, little attention has so far been g...Since the 1970s, the studies on the geography of enterprise have become increasingly concerned with the spatial evolution of an enterprises in the West developed countries. However, little attention has so far been given to the spatial evolution of an enterprise in China. With China's ongoing economy and political reforms, a number of fundamental changes of enterprise behavior have occurred. These changes have certainly important influences on the evolution of industrial location. Therefore, there is a need for examining the spatial evolution of an enterprise in China. The purpose of the paper is to review the mapjor models of both the growth,and associated spatial evolution of an enterprise, with an illustrative case study of the HeaVy Automobile Enterprise Group of China. The paper is organized by three parts. The first examines the spoilal groWth and location adjustment of multi-plant enterprise. The second reviews mapjor models of the spatial evolution of an enterprise. And the third analyzes the spatial evolution, over a period of time, of a representative sample of the Heavy Automobile Enterprise Group of China, and illustrates the findings with case studies. It is suggested that the models of spatial evolution of an enterprise would provide more evidence about micro-mechanism for evolution of micro- regional economic systems.展开更多
Radioactive Ion Beam Line in Lanzhou (RIBLL) is the heavy ion radiation beam equipment on Heavy Ion Accelerator in Lanzhou, which can provide a variety of Radioactive Ion Beam （RIB）for physical experiments.In order ...Radioactive Ion Beam Line in Lanzhou (RIBLL) is the heavy ion radiation beam equipment on Heavy Ion Accelerator in Lanzhou, which can provide a variety of Radioactive Ion Beam （RIB）for physical experiments.In order to improve the efficiency and accuracy of the experiments, we need a high-performance Parallel Plate Avalanche Counter(PPAC) to monitor the RIB online and to measure the track of the incident particles and reaction products.展开更多
The heavy-ion therapy is one of the modalities to treat a patient with body tumors. In the tumor therapy, we wish to irradiate only the tumors in order to keep the normal tissues/organs undamaged. Along the range of h...The heavy-ion therapy is one of the modalities to treat a patient with body tumors. In the tumor therapy, we wish to irradiate only the tumors in order to keep the normal tissues/organs undamaged. Along the range of heavy ion passing through the matter, most of ion energy deposits at the end of the range, forming a so called Bragg peak[1]. In order to accurately determine the irradiation profiles and positions of scanned展开更多
The prompt fission neutron spectrum(PFNS)is a key nuclear data quantity that is of particular interest and plays a crucial role in understanding and modeling fission processes.An array comprising 48 liquid scintillati...The prompt fission neutron spectrum(PFNS)is a key nuclear data quantity that is of particular interest and plays a crucial role in understanding and modeling fission processes.An array comprising 48 liquid scintillation detectors and a parallelplate avalanche counter(PPAC)was developed at the China Institute of Atomic Energy(CIAE)to measure the PFNS of actinide nuclei.Efficiency and energy calibrations were performed for all the liquid scintillators,and their efficiencies were consistently found to be better than 5%.The time resolutions of the PPAC and liquid scintillators were measured to be 1.08 ns and 1.16 ns using~(252)Cf and~(207)Bi sources,respectively.The pulse shape discrimination of the liquid scintillator was utilized to identify neutron andγsignals on an event-by-event basis,and the figure of merit was deduced as 1.12 at a 200 ke Vee threshold.The contribution to the PFNS from multiple scattered neutrons was evaluated via Geant4 simulations,and those originating from the environment were found to be comparable to the crosstalk between the detectors.The neutron efficiency of the entire detection array was calibrated using a~(252)Cf spontaneous fission source and was demonstrated to be consistent with the Geant4 simulation results,which verified the reliability of the detection array.展开更多
The network resource allocation in SDN for control applications is becoming a key problem in the near future because of the conflict between the need of the flow-level flexibility control and the limited capacity of f...The network resource allocation in SDN for control applications is becoming a key problem in the near future because of the conflict between the need of the flow-level flexibility control and the limited capacity of flow table.Based on the analysis of the difference of the definition of network resource between SDN and traditional IP network,the idea of the integrated allocation of link bandwidth and flow table for multiple control applications in SDN is proposed in this paper.Furthermore,a price-based joint allocation model of network resource in SDN is built by introducing the price for each of the resources,which can get the proportional fair allocation of link bandwidth and the minimum global delay at the same time.We have also designed a popular flow scheduling policy based on the proportional fair allocation of link bandwidth in order to achieve the minimum global delay.A flow scheduling module has been implemented and evaluated in Floodlight,named virtual forwarding space(VFS).VFS can not only implement the fair allocation of link bandwidth and minimum delay flow scheduling in data plane but also accelerate packet forwarding by looking up control rules in control plane.展开更多
Based on 294 earthquake sequences with magnitude greater than or equal to 5.0 occurred in Chinese mainland since 1970, the spatial distribution features of sequence types have been studied. In southwestern China, it t...Based on 294 earthquake sequences with magnitude greater than or equal to 5.0 occurred in Chinese mainland since 1970, the spatial distribution features of sequence types have been studied. In southwestern China, it takes mainshock-aftershock sequence type （MAT） as the major in Chuan-Dian rhombic block and concerned Xianshuihe-Anninghe-Xiaojiang seismic belt, as well as in Jinshajiang-Honghe seismic belt. Multiple mainshock type （MMT） mainly distributes in western Yunnan, and Longlin and Lancang areas in Tengchong-Baoshan block in west of Nujiang-Lancangjiang fault zone. A few isolated earthquake type （IET） mainly occurred in northwestern Sichuan and there is no IET occurred in Yunnan region. In northwestern China, it takes mainshock-aftershock sequence type （MAT） as the major in west segment of South Tianshan in Xinjiang region. Some MMT also occurred in this area in the intersection of Kalpin block and the Puchang fault zone. It takes IET as the major in middle Tianshan in Xinjiang. Along the Qilianshan seismic belt, most of sequences are MAT. In Qinghai region, it takes MAT as the major, but the regional feature of the spatial distribution of sequence types is not very clear. In North China, it takes MAT as the major in Yinshan-Yanshan-Bohai seismic belt, north edge of North China, and in Hebei plain seismic belt, as well as in sub-plate of lower river area of Yangtze River. In intersection of north segment of Shanxi seismic belt and the NW-trending Yinshan-Yanshan-Bohai seismic belt, there are several moderate or strong MMT with magnitude from 5.0 to 6.0 occurred. In south of North China around the latitude line of 35°N, it takes IET as the major. The spatial distribution of sequence types is relevant to the patterns of tectonic movements. MAT is mostly produced by the ruptures of locked units or asperities or the neonatal separating segments inside the fault zones. MMT is generally relevant to the conjugate structures or intersection of many tectonic settings. Further extension of simple fault often produces IET. Spatial distribution of sequence types is also correlative to the regional and deep environment of crustal medium to some extent. MAT mainly distributes in high velocity area in upper crust or in the transition zone between high velocity area and low velocity area, MMT mostly occurred in the low velocity area in upper crust.展开更多
文摘Hester-Dendy (HD) multi-plate samplers have been widely used by state and federal government agencies for bioassessment of water quality through use of macroinvertebrate community data. To help guide remediation and restoration efforts at the Niagara River Great Lakes Area of Concern site, a multi-agency study was conducted in 2014 to assess the contribution of seven major urban tributaries on the US side of the river toward the impairment of the Niagara River. As part of this study, macroinvertebrate communities were sampled using two co-located versions of HD samplers: one version used by the New York State Department of Environmental Conservation (NYSDEC) and another by the US Environmental Protection Agency Office of Research and Development. Samplers were deployed in tributaries in highly developed watersheds with high percent impervious surface. The two sampling methods varied in terms of number and size of plates, between-plate spacing, and deployment method. Comparison of the similarity/grouping of communities with multivariate ordination techniques, Nonmetric Multidimensional Scaling and Multi-Response Permutation Procedure, showed that both methods were able to detect differences in communities at stations, despite some grouping by month and method. The indices and metrics derived from the two HD methods were found to give comparable but not identical assessments of water quality. Despite their differences, the methods were robust with respect to water quality categories derived from indices used nationally (HBI) and by NY state (BAP). For the common richness metrics, total taxa and EPT richness, there was no statistical difference between means from 3 samplings. Some metrics, especially percent tolerant collector-gatherer individuals, did show significant differences at certain stations. Indicator Species Analysis showed some taxa associated with each method. The observed community differences were thought mostly due to the difference in sampler deployment position. .
文摘The purpose of this study is to verify an 1D multi-plate heat-transfer model estimating the temperature distribution on the interface between polymer electrolyte membrane and catalyst layer at cathode in single cell of polymer electrolyte fuel cell, which is named as reaction surface in this study, with a 3D numerical simulation model solving many governing equations on the coupling phenomena in the cell. The results from both models/simulations agreed well. The effects of initial operation temperature, flow rate, and relative humidity of supply gas on temperature distribution on the reaction surface were also investigated. It was found in both 1D and 3D simulations that, the temperature rise （i.e., Treact-Tini） of the reaction surface from initial operation temperature at 70℃ was higher than that at 80℃ irrespective of flow rate of supply gas. The effect of relative humidity of supply gas on Treact- Tini near the inlet of the cell was small. Compared to the previous studies conducted under the similar operation conditions, the Treact - Tini calculated by 1D multi-plate heat-transfer model in this study as well as numerical simulation using 3D model was reasonable.
文摘为提升平行板雪崩计数器(PPAC)的使用性能,设计了一款具有50 ns和100 ns两档达峰时间的四通道滤波成形专用集成电路(ASIC)芯片。该ASIC芯片与已有的前放芯片结合可实现PPAC的信号读出。芯片内每个通道包括极零相消、低通滤波成形及输出电路。输入动态范围-0.8^+0.8 V内的线性度达到0.2%;-3 d B带宽噪声不高于60μV;芯片功耗30 m W;面积为2.6 mm×1.25 mm。
基金Financial supports from the National Natural Science Foundation of China(No.21476256)Science Foundation of China University of PetroleumBeijing(Nos.2462017BJB03&2462018BJC004)are gratefully acknowledged.
文摘Heat exchanger networks(HENs)in separated plants can be simultaneously synthesized through process streams directly or intermediate fluids indirectly.However,the direct and indirect methods are studied separately in most existing researches.As the result,conventional designs are probably suboptimal,because optimal solutions may call for hybrid approach wherein direct and indirect integration methods are used synchronously.To circumvent this drawback aforementioned,we propose in this research a novel methodology to synthesize multi-plant HENs considering both direct and indirect approaches.The methodology employs a novel superstructure covering most potential topologies for both interplant and intra-plant heat integration.We also take into account multiple kinds of intermediate fluids for indirect integration and this has not been fully addressed in previous research.A mixed-integer nonlinear programming(MINLP)is formulated to optimize multi-plant HENs involving indirect and direct methods.One example from existing literature and one industrial problem are solved to demonstrate the methodology’s capability.
文摘Since the 1970s, the studies on the geography of enterprise have become increasingly concerned with the spatial evolution of an enterprises in the West developed countries. However, little attention has so far been given to the spatial evolution of an enterprise in China. With China's ongoing economy and political reforms, a number of fundamental changes of enterprise behavior have occurred. These changes have certainly important influences on the evolution of industrial location. Therefore, there is a need for examining the spatial evolution of an enterprise in China. The purpose of the paper is to review the mapjor models of both the growth,and associated spatial evolution of an enterprise, with an illustrative case study of the HeaVy Automobile Enterprise Group of China. The paper is organized by three parts. The first examines the spoilal groWth and location adjustment of multi-plant enterprise. The second reviews mapjor models of the spatial evolution of an enterprise. And the third analyzes the spatial evolution, over a period of time, of a representative sample of the Heavy Automobile Enterprise Group of China, and illustrates the findings with case studies. It is suggested that the models of spatial evolution of an enterprise would provide more evidence about micro-mechanism for evolution of micro- regional economic systems.
文摘Radioactive Ion Beam Line in Lanzhou (RIBLL) is the heavy ion radiation beam equipment on Heavy Ion Accelerator in Lanzhou, which can provide a variety of Radioactive Ion Beam （RIB）for physical experiments.In order to improve the efficiency and accuracy of the experiments, we need a high-performance Parallel Plate Avalanche Counter(PPAC) to monitor the RIB online and to measure the track of the incident particles and reaction products.
文摘The heavy-ion therapy is one of the modalities to treat a patient with body tumors. In the tumor therapy, we wish to irradiate only the tumors in order to keep the normal tissues/organs undamaged. Along the range of heavy ion passing through the matter, most of ion energy deposits at the end of the range, forming a so called Bragg peak[1]. In order to accurately determine the irradiation profiles and positions of scanned
基金supported by Continuous-Support Basic Scientific Research Project(No.BJ010261223282)the National Natural Science Foundation of China(Nos.U2167201,11975318)+2 种基金the State Key Laboratory of Nuclear Physics and TechnologyPeking University(No.NPT2023KFY01)the Research and Development Project of China National Nuclear Corporation。
文摘The prompt fission neutron spectrum(PFNS)is a key nuclear data quantity that is of particular interest and plays a crucial role in understanding and modeling fission processes.An array comprising 48 liquid scintillation detectors and a parallelplate avalanche counter(PPAC)was developed at the China Institute of Atomic Energy(CIAE)to measure the PFNS of actinide nuclei.Efficiency and energy calibrations were performed for all the liquid scintillators,and their efficiencies were consistently found to be better than 5%.The time resolutions of the PPAC and liquid scintillators were measured to be 1.08 ns and 1.16 ns using~(252)Cf and~(207)Bi sources,respectively.The pulse shape discrimination of the liquid scintillator was utilized to identify neutron andγsignals on an event-by-event basis,and the figure of merit was deduced as 1.12 at a 200 ke Vee threshold.The contribution to the PFNS from multiple scattered neutrons was evaluated via Geant4 simulations,and those originating from the environment were found to be comparable to the crosstalk between the detectors.The neutron efficiency of the entire detection array was calibrated using a~(252)Cf spontaneous fission source and was demonstrated to be consistent with the Geant4 simulation results,which verified the reliability of the detection array.
基金Supported by the National High-tech R&D Program("863" Program) of China (No.2013AA013505)the National Science Foundation of China(No.61472213)National Research Foundation of Korea(NRF 2014K1A1A2064649)
文摘The network resource allocation in SDN for control applications is becoming a key problem in the near future because of the conflict between the need of the flow-level flexibility control and the limited capacity of flow table.Based on the analysis of the difference of the definition of network resource between SDN and traditional IP network,the idea of the integrated allocation of link bandwidth and flow table for multiple control applications in SDN is proposed in this paper.Furthermore,a price-based joint allocation model of network resource in SDN is built by introducing the price for each of the resources,which can get the proportional fair allocation of link bandwidth and the minimum global delay at the same time.We have also designed a popular flow scheduling policy based on the proportional fair allocation of link bandwidth in order to achieve the minimum global delay.A flow scheduling module has been implemented and evaluated in Floodlight,named virtual forwarding space(VFS).VFS can not only implement the fair allocation of link bandwidth and minimum delay flow scheduling in data plane but also accelerate packet forwarding by looking up control rules in control plane.
基金Joint Seismological Science Foundation of China (105076) and continued subject ″Statistic Features of Aftershock Sequences and Forecast of the Large Aftershocks″ (2004BA601B01-04-02), Ministry of Science and Technology of China in the 10th Five-Year Plan.
文摘Based on 294 earthquake sequences with magnitude greater than or equal to 5.0 occurred in Chinese mainland since 1970, the spatial distribution features of sequence types have been studied. In southwestern China, it takes mainshock-aftershock sequence type （MAT） as the major in Chuan-Dian rhombic block and concerned Xianshuihe-Anninghe-Xiaojiang seismic belt, as well as in Jinshajiang-Honghe seismic belt. Multiple mainshock type （MMT） mainly distributes in western Yunnan, and Longlin and Lancang areas in Tengchong-Baoshan block in west of Nujiang-Lancangjiang fault zone. A few isolated earthquake type （IET） mainly occurred in northwestern Sichuan and there is no IET occurred in Yunnan region. In northwestern China, it takes mainshock-aftershock sequence type （MAT） as the major in west segment of South Tianshan in Xinjiang region. Some MMT also occurred in this area in the intersection of Kalpin block and the Puchang fault zone. It takes IET as the major in middle Tianshan in Xinjiang. Along the Qilianshan seismic belt, most of sequences are MAT. In Qinghai region, it takes MAT as the major, but the regional feature of the spatial distribution of sequence types is not very clear. In North China, it takes MAT as the major in Yinshan-Yanshan-Bohai seismic belt, north edge of North China, and in Hebei plain seismic belt, as well as in sub-plate of lower river area of Yangtze River. In intersection of north segment of Shanxi seismic belt and the NW-trending Yinshan-Yanshan-Bohai seismic belt, there are several moderate or strong MMT with magnitude from 5.0 to 6.0 occurred. In south of North China around the latitude line of 35°N, it takes IET as the major. The spatial distribution of sequence types is relevant to the patterns of tectonic movements. MAT is mostly produced by the ruptures of locked units or asperities or the neonatal separating segments inside the fault zones. MMT is generally relevant to the conjugate structures or intersection of many tectonic settings. Further extension of simple fault often produces IET. Spatial distribution of sequence types is also correlative to the regional and deep environment of crustal medium to some extent. MAT mainly distributes in high velocity area in upper crust or in the transition zone between high velocity area and low velocity area, MMT mostly occurred in the low velocity area in upper crust.
