In electrochemical energy storage systems,the sodium-ion battery is typically integrated in the form of a“cell-module-cluster”,but its cross-scale thermal runaway triggering risk and the propagation mechanism remain...In electrochemical energy storage systems,the sodium-ion battery is typically integrated in the form of a“cell-module-cluster”,but its cross-scale thermal runaway triggering risk and the propagation mechanism remain unclear.This study reveals the cross-scale thermal runaway triggering and propagation behavior of sodium-ion batteries of“cell-module-cluster”under overcharge conditions,and investigates the effects of key factors,including module spacing,triggering cell location,and heat dissipation condition,on the thermal runaway propagation behavior.Results demonstrate that the thermal runaway propagation in a module containing the overcharged cell follows a sequential triggering mode,while thermal runaway in the downstream module exhibits a simultaneous triggering mode with greater severity.Furthermore,increasing the module spacing or enhancing the heat dissipation capacity can effectively reduce the heat accumulation and prevent the trigger of thermal runaway.On the above basis,the multi-dimensional evaluation strategy is proposed to quantitatively assess the hazard of sodium-ion battery cluster thermal runaway.The findings serve as a foundation for the safe design of sodium-ion batteries in energy storage systems.展开更多
Metal organic framework(MOF) assembled with coordination bonds has the disadvantage of poor stability that limits its application in the field of stationary phase,while covalent organic framework(COF)assembled through...Metal organic framework(MOF) assembled with coordination bonds has the disadvantage of poor stability that limits its application in the field of stationary phase,while covalent organic framework(COF)assembled through covalent bonds exhibits excellent structural stability.It has been shown that the stationary phases prepared by combining MOF and COF can make up for the poor stability of MOF@SiO_(2),and the MOF/COF composites have superior chromatographic separation performance.However,the traditional methods for preparing COF/MOF based stationary phases are generally solvent thermal synthesis.In this study,a green and low-cost synthesis method was proposed for the preparation of MOF/COF@SiO_(2) stationary phase.Firstly,COF@SiO_(2) was prepared in a choline chloride/ethylene glycol based deep eutectic solvent(DES).Secondly,another acid-base tunable DES prepared by mixing p-toluenesulfonic acid(PTSA)and 2-methylimidazole in different proportions was introduced as the reaction solvent and reactant for rapid synthesis of MOF/COF@SiO_(2).Compared with the toxic transition metal-based MOFs selected in most previous studies,a lightweight and non-toxic S-zone metal(calcium) based MOF was employed in this study.PTSA and calcium will form the calcium/oxygen-containing organic acid framework in acidic DES,which assembles with terephthalic acid dissolved in basic DES to form MOF.The strong hydrogen bonding effect of DES can facilitate rapid assembly of Ca-MOF.The obtained Ca-MOF/COF@SiO_(2) can be used for multi-mode chromatography to efficiently separate multiple isomeric/hydrophilic/hydrophobic analytes.The synthesis method of Ca-MOF/COF@SiO_(2) is green and mild,especially the use of acid-base tunable DES promotes the rapid synthesis of non-toxic Ca-MOF/COF@silica composites,which offers an innovative approach of greenly synthesizing novel MOF/COF stationary phases and extends their applications in the field of chromatography.展开更多
The flow behavior of molten steel in the thin slab mold under high casting speed conditions was investigated,with a focus on the multi-mode continuous casting and rolling mold.A steel-slag two-phase flow model was est...The flow behavior of molten steel in the thin slab mold under high casting speed conditions was investigated,with a focus on the multi-mode continuous casting and rolling mold.A steel-slag two-phase flow model was established using large eddy simulation,the volume of fluid,and magnetohydrodynamics methods through numerical simulation.The maximum flow velocity and wave height at the steel-slag interface within the mold are critical evaluation criteria for analyzing asymmetric flow under varying casting speeds and electromagnetic braking.The results indicate that the asymmetric flows within the mold do not occur synchronously.The severity of the asymmetric flow correlates with the velocity difference across the steel-slag interface.A greater biased flow prolongs the time required to revert to a steady state.When the magnetic field intensity is set to 0.24 T and the magnetic pole position is at 390 mm from the steel-slag interface,this configuration can reduce the velocity of the steel-slag interface,thereby mitigating the asymmetric flow.Additionally,it can diminish the velocity,impact depth,and impact intensity on the narrow face of the jet,thus improving the distribution of velocity and turbulent kinetic energy within the mold.This configuration prolongs the time required for the steel-slag interface to transition from a stable state to its maximum velocity and shortens the time for the interface to return to stability from an unstable state.Moreover,it ensures the positional stability of the steel-slag interface,confining its position within−3 mm.展开更多
Arc faults within the transformers can generate sudden pressure surges,constituting significant hazards that may precipitate oil tank explosions and severely compromise power system stability.Conventional power−freque...Arc faults within the transformers can generate sudden pressure surges,constituting significant hazards that may precipitate oil tank explosions and severely compromise power system stability.Conventional power−frequency arc discharge experiments encounter limitations in isolating pressure wave characteristics due to persistent gas generation and arc reignition.To circumvent these challenges,an oil-immersed impulse voltage discharge platform was conceived and engineered to investigate pressure wave propagation dynamics.A pressure numerical simulation model and theoretical model of oil−solid interface reflection and refraction were subsequently established to elucidate the pressure propagation mechanism.The experimental and simulation results show that the pressure wave generated by pulsed arc discharge in oil propagates radially in the form of spherical waves.Due to the viscous loss and wave front expansion of transformer oil,the peak pressure decays exponentially with distance,with a decay coefficientβ=1.15.When pressure waves encounter metal obstacles inside transformer oil,there are two propagation paths:direct transmission through and multiple reflections through,and a mode transformation of pressure waves occurs at the oil−solid interface,mainly propagating through obstacles in the form of transverse waves.This work quantitatively delineates the energy pressure wave coupling,propagation dynamics,and attenuation mechanisms,providing critical insights for assessing and mitigating arc fault-induced transformer explosion risks.展开更多
Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagati...Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagation behavior.To address the unclear mechanisms governing fracture penetration across coal-gangue interfaces,this study employs the Continuum-Discontinuum Element Method(CDEM)to simulate and analyze the vertical propagation of hydraulic fractures initiating within coal seams,based on geomechanical parameters derived from the deep Benxi Formation coal seams in the southeastern Ordos Basin.The investigation systematically examines the influence of geological and operational parameters on cross-interfacial fracture growth.Results demonstrate that vertical stress difference,elastic modulus contrast between coal and gangue layers,interfacial stress differential,and interfacial cohesion at coal-gangue interfaces are critical factors governing hydraulic fracture penetration through these interfaces.High vertical stress differences(>3 MPa)inhibit interfacial dilation,promoting predominant crosslayer fracture propagation.Reduced interfacial stress contrasts and enhanced interfacial cohesion facilitate fracture penetration across interfaces.Furthermore,smaller elastic modulus contrasts between coal and gangue correlate with increased interfacial aperture.Finally,lower injection rates effectively suppress vertical fracture propagation in deep coal reservoirs.This study elucidates the characteristics and mechanisms governing cross-layer fracture propagation in coal–rock composites with interbedded partings,and delineates the dynamic evolution laws and dominant controlling factors involved.Thefindings provide critical theoretical insights for the optimization of fracture design and the efficient development of deep coalbed methane reservoirs.展开更多
The influence of different solution and aging conditions on the microstructure,impact toughness,and crack initiation and propagation mechanisms of the novel α+β titanium alloy Ti6422 was systematically investigated....The influence of different solution and aging conditions on the microstructure,impact toughness,and crack initiation and propagation mechanisms of the novel α+β titanium alloy Ti6422 was systematically investigated.By adjusting the furnace cooling time after solution treatment and the aging temperature,Ti6422 alloy samples were developed with a multi-level lamellar microstructure,in-cluding microscaleαcolonies and α_(p) lamellae,as well as nanoscale α_(s) phases.Extending the furnace cooling time after solution treatment at 920℃ for 1 h from 240 to 540 min,followed by aging at 600℃ for 6 h,increased the α_(p) lamella content,reduced the α_(s) phase content,expanded theαcolonies and α_(p) lamellae size,and improved the impact toughness from 22.7 to 53.8 J/cm^(2).Additionally,under the same solution treatment,raising the aging temperature from 500 to 700℃ resulted in a decrease in the α_(s) phase content and a growth in the thickness of the α_(p) lamella and α_(s) phase.The impact toughness increased significantly with these changes.Samples with high α_(p) lamellae content or large α_(s) phase size exhibited high crack initiation and propagation energies.Impact deformation caused severe kinking of the α_(p) lamellae in crack initiation and propagation areas,leading to a uniform and high-density kernel average misorientation(KAM)distribu-tion,enhancing plastic deformation coordination and uniformity.Moreover,the multidirectional arrangement of coarserαcolonies and α_(p) lamellae continuously deflect the crack propagation direction,inhibiting crack propagation.展开更多
The stability of rock slopes is frequently controlled by the initiation and propagation of inherent dominant cracks.This study systematically investigated these processes in valley slopes by combining fracture-mechani...The stability of rock slopes is frequently controlled by the initiation and propagation of inherent dominant cracks.This study systematically investigated these processes in valley slopes by combining fracture-mechanics analysis with transparent soil model tests.An analytical expression for the stress field at the dominant crack tip was derived from the slope stress distribution by superposing the corresponding stress intensity factors(SIFs).The theoretical predictions were then validated against observations from transparent soil model tests.The influences of slope angle(β),crack inclination angle(α),crack position parameter(b),and crack length parameter(h)on crack initiation and propagation were quantified.The results indicated that:(1)cracks at the slope crest tended to propagate in shear mode,and the shear crack initiation angle(θ_(s))was approximately 8°.Cracks at the slope toe might propagate in either tensile or shear mode.(2)θ_(s) at the slope crest increased withβ,b,and l,and decreased withα.The maximum change inθ_(s) induced by the considered parameters was approximately 30°.(3)The tensile crack initiation angle(θ_(t))at the slop toe decreased withβ,α,and l,while the influence of b was comparatively minor.The maximum change inθ_(t) caused by individual parameters ranged approximately from 25°to 60°.Predicted crack propagation modes and directions showed good agreement with experimental results.These findings provide theoretical guidance for stability assessments of valley slopes controlled by dominant crack propagation.展开更多
Hydraulic stimulation technology is widely employed to enhance the permeability of geothermal reservoirs.Nevertheless,accurately predicting hydraulic fracture propagation in complex geological conditions remains chall...Hydraulic stimulation technology is widely employed to enhance the permeability of geothermal reservoirs.Nevertheless,accurately predicting hydraulic fracture propagation in complex geological conditions remains challenging,thereby hindering the effective utilization of existing natural fractures.In this study,a phase field model was developed utilizing the finite element method to examine the influence of fluid presence,stress conditions,and natural fractures on the initiation and propagation of hydraulic fractures.The model employs Biot's poroelasticity theory to establish the coupling between the displacement field and the fluid field,while the phase field theory is applied to simulate fracture behavior.The results show that whenσ_(x0)/σ_(y0)<3 or qf<20 kg/(m^(3)·s),the presence of natural fractures can alter the original propagation direction of hydraulic fractures.Conversely,in the absence of these conditions,the propagation path of natural fractures is predominantly influenced by the initial stress field.Furthermore,based on the analysis of breakdown pressure and damage area,the optimal intersection angle between natural fractures and hydraulic fractures is determined to range from 45°to 60°.Finally,once a dominant channel forms,initiating and propagating hydraulic fractures in other directions becomes increasingly difficult,even in highly fractured areas.This method tackles the challenges of initiating and propagating hydraulic fractures in complex geological conditions,providing a theoretical basis for optimizing Enhanced Geothermal System(EGS)projects.展开更多
Using the software ANSYS-19.2/Explicit Dynamics,this study performedfinite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crac...Using the software ANSYS-19.2/Explicit Dynamics,this study performedfinite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crack,strengthened by steel wire wrapping.The effects of the thread tensile force of the steel winding in the form of single rings at the crack edges and the wires with different winding diameters and pitches were also studied.The results showed that the strengthening was preferably executed at a minimum value of the thread tensile force,which was 6.4%more effective than that at its maximum value.The analysis of the influence of the winding dia-meters showed that the equivalent stresses increased by 32%from the beginning of the crack growth until the wire broke.The increment in winding diameter decelerated the disclosure of the edge crack and reduced its length by 8.2%.The analysis of the influence of the winding pitch showed that decreasing the distance between the winding turns also led to a 33.6%reduction in the length of the straight crack and a 7.9%reduction in the maximum stres-ses on the strengthened pipeline cross-section.The analysis of the temperature effect on the pipeline material,within a range from-40℃to+50℃,resulted in a crack length change of up to 5.8%.As the temperature dropped,the crack length decreased.Within such a temperature range,the maximum stresses were observed along the cen-tral area of the crack,which were equal to 413 MPa at+50℃and 440 MPa at-40℃.The results also showed that the presence of the steel winding in the pipeline significantly reduced the length of crack propagation up to 8.4 times,depending on the temperature effect and design parameters of prestressing.This work integrated the existing methods for crack localization along steel gas pipelines.展开更多
The crack initiation and early propagation are of great significance to the overall fatigue life of material.In order to investigate the anisotropic fracture behavior of laser metal deposited Ti-6Al-4V alloy(LMD Ti64)...The crack initiation and early propagation are of great significance to the overall fatigue life of material.In order to investigate the anisotropic fracture behavior of laser metal deposited Ti-6Al-4V alloy(LMD Ti64)during the early stage,the fourpoint bending fatigue test was carried out on specimens of three different directions,as well as the forged specimens.The results indicate the anisotropic crack initiation and early propagation of LMD Ti64.The direction perpendicular to the deposition direction exhibits a better fatigue resistance than the other two.The crack initiation position and propagation path are dominated by the microstructure in the vicinity of U-notch.LMD Ti64 has a typical small crack effect,and the early crack propagation velocities in three directions are similar.Affected by the slip system of LMD Ti64,secondary cracks frequently occur,which are often found to have an angle of 60°to the main crack.The electron backscatter diffraction analysis indicates that LMD Ti64 has preferred orientations,i.e.,strong 0001//Z texture and 001//Z texture.Their crystallographic orientation will change as the direction of columnarβgrains turns over,resulting in the fatigue anisotropy of LMD Ti64 in crack initiation and early crack propagation process.展开更多
Prepulse combined hydraulic fracturing facilitates the development of fracture networks by integrating prepulse hydraulic loading with conventional hydraulic fracturing.The formation mechanisms of fracture networks be...Prepulse combined hydraulic fracturing facilitates the development of fracture networks by integrating prepulse hydraulic loading with conventional hydraulic fracturing.The formation mechanisms of fracture networks between hydraulic and pre-existing fractures under different prepulse loading parameters remain unclear.This research investigates the impact of prepulse loading parameters,including the prepulse loading number ratio(C),prepulse loading stress ratio(S),and prepulse loading frequency(f),on the formation of fracture networks between hydraulic and pre-existing fractures,using both experimental and numerical methods.The results suggest that low prepulse loading stress ratios and high prepulse loading number ratios are advantageous loading modes.Multiple hydraulic fractures are generated in the specimen under the advantageous loading modes,facilitating the development of a complex fracture network.Fatigue damage occurs in the specimen at the prepulse loading stage.The high water pressure at the secondary conventional hydraulic fracturing promotes the growth of hydraulic fractures along the damage zones.This allows the hydraulic fractures to propagate deeply and interact with pre-existing fractures.Under advantageous loading conditions,multiple hydraulic fractures can extend to pre-existing fractures,and these hydraulic fractures penetrate or propagate along pre-existing fractures.Especially when the approach angle is large,the damage range in the specimen during the prepulse loading stage increases,resulting in the formation of more hydraulic fractures.展开更多
Carbon dots(CDs)-based composites have shown impressive performance in fields of information encryption and sensing,however,a great challenge is to simultaneously implement multi-mode luminescence and room-temperature...Carbon dots(CDs)-based composites have shown impressive performance in fields of information encryption and sensing,however,a great challenge is to simultaneously implement multi-mode luminescence and room-temperature phosphorescence(RTP)detection in single system due to the formidable synthesis.Herein,a multifunctional composite of Eu&CDs@p RHO has been designed by co-assembly strategy and prepared via a facile calcination and impregnation treatment.Eu&CDs@p RHO exhibits intense fluorescence(FL)and RTP coming from two individual luminous centers,Eu3+in the free pores and CDs in the interrupted structure of RHO zeolite.Unique four-mode color outputs including pink(Eu^(3+),ex.254 nm),light violet(CDs,ex.365 nm),blue(CDs,254 nm off),and green(CDs,365 nm off)could be realized,on the basis of it,a preliminary application of advanced information encoding has been demonstrated.Given the free pores of matrix and stable RTP in water of confined CDs,a visual RTP detection of Fe^(3+)ions is achieved with the detection limit as low as 9.8μmol/L.This work has opened up a new perspective for the strategic amalgamation of luminous vips with porous zeolite to construct the advanced functional materials.展开更多
Multi-stage and multi-cluster fracturing(MMF)is a crucial technology in unconventional oil and gas development,aiming to enhance production by creating extensive fracture networks.However,achieving uniform expansion o...Multi-stage and multi-cluster fracturing(MMF)is a crucial technology in unconventional oil and gas development,aiming to enhance production by creating extensive fracture networks.However,achieving uniform expansion of multi-cluster hydraulic fractures(HFs)in MMF remains a significant challenge.Field practice has shown that the use of temporary plugging and diversion fracturing(TPDF)can promote the balanced expansion of multi-cluster HFs.This study conducted TPDF experiments using a true triaxial fracturing simulation system setting a horizontal well completion with multi-cluster jetting perforations to investigate the equilibrium initiation and extension of multi-cluster fractures.The influence of key parameters,including cluster spacing,fracturing fluid viscosity,differential stress,and fracturing fluid injection rate,on fracture initiation and propagation was systematically examined.The results indicate that while close-spaced multi-cluster fracturing significantly increases the number of HFs,it also leads to uneven extension of HFs in their propagation.In contrast,TPDF demonstrates effectiveness in mitigating uneven HF extension,increasing the number of HFs,and creating a larger stimulated reservoir volume,ultimately leading to improved oil and gas well productivity.Moreover,under conditions of high differential stress,the differential stress within the formation exerts a stronger guiding effect in HFs,which are more closely aligned with the minimum principal stress.Low-viscosity fluids facilitate rapid and extensive fracture propagation within the rock formation.High-volume fluid injection,on the other hand,more comprehensively fills the formation.Therefore,employing lowviscosity and high-volume fracturing is advantageous for the initiation and extension of multi-cluster HFs.展开更多
The acoustic wave propagation in gas-saturated double-porosity materials composed of a microporous matrix and mesopores with arrays of plate-type resonators is investigated.A macroscopic description,established with t...The acoustic wave propagation in gas-saturated double-porosity materials composed of a microporous matrix and mesopores with arrays of plate-type resonators is investigated.A macroscopic description,established with the two-scale asymptotic homogenization method,evidences the combined effect of inner resonances on the acoustic properties of the respective effective visco-thermal fluid.One type of resonance originates from strong pore-scale fluid-structure interaction,while the other one arises from pressure diffusion.These phenomena respectively cause weakly and highly damped resonances,which are activated by internal momentum or mass sources,and can largely influence,depending on the material's morphology,either the effective fluid's dynamic density,compressibility,or both.We introduce semi-analytical models to illustrate the key effective properties of the studied multiscale metamaterials.The results provide insights for the bottom-up design of multiscale acoustic metamaterials with exotic behaviors,such as the negative,very slow,or supersonic phase velocity,as well as sub-wavelength bandgaps.展开更多
Prostate cancer(PCa)is characterized by high incidence and propensity for easy metastasis,presenting significant challenges in clinical diagnosis and treatment.Tumor microenvironment(TME)-responsive nanomaterials prov...Prostate cancer(PCa)is characterized by high incidence and propensity for easy metastasis,presenting significant challenges in clinical diagnosis and treatment.Tumor microenvironment(TME)-responsive nanomaterials provide a promising prospect for imaging-guided precision therapy.Considering that tumor-derived alkaline phosphatase(ALP)is over-expressed in metastatic PCa,it makes a great chance to develop a theranostics system with ALP responsive in the TME.Herein,an ALP-responsive aggregationinduced emission luminogens(AIEgens)nanoprobe AMNF self-assembly was designed for enhancing the diagnosis and treatment of metastatic PCa.The nanoprobe exhibited self-aggregation in the presence of ALP resulted in aggregation-induced fluorescence,and enhanced accumulation and prolonged retention period at the tumor site.In terms of detection,the fluorescence(FL)/computed tomography(CT)/magnetic resonance(MR)multi-mode imaging effect of nanoprobe was significantly improved post-aggregation,enabling precise diagnosis through the amalgamation of multiple imaging modes.Enhanced CT/MR imaging can achieve assist preoperative tumor diagnosis,and enhanced FL imaging technology can achieve“intraoperative visual navigation”,showing its potential application value in clinical tumor detection and surgical guidance.In terms of treatment,AMNF showed strong absorption in the near infrared region after aggregation,which improved the photothermal treatment effect.Overall,our work developed an effective aggregation-enhanced theranostic strategy for ALP-related cancers.展开更多
The approximately 3000 km long Tan-Lu fault zone(TLFZ)in East Asia is the longest continental strike-slip fault zone in the world and exemplifies how such a fault zone forms and propagates on a continental scale.Struc...The approximately 3000 km long Tan-Lu fault zone(TLFZ)in East Asia is the longest continental strike-slip fault zone in the world and exemplifies how such a fault zone forms and propagates on a continental scale.Structural and geochronological data from the TLFZ and surrounding regions indicate that the fault zone originated as NE/SW-striking sinistral ductile shear zones along an oblique continental convergence margin during the Triassic indentation collision between the North China Craton and the Yangtze Block.The Triassic fault zone,with a total length of about 720 km between the Dabie and Sulu orogens,exhibited an apparent sinistral offset of approximately 300 km along the TLFZ.The second stage of sinistral movement occurred in the earliest Late Jurassic,reactivating the pre-existing southern segment and propagating northwards to the southern coastline of present-day Bohai Bay,as well as forming a significant portion of the Dunhua-Mishan fault zone.The third stage of sinistral movement,in the earliest Early Cretaceous,was the most intense strike-slip movement of the Mesozoic,leading to the complete linkage of the TLFZ.This stage included further northward propagation of the southern-middle segment,both southward and northward propagation of the Dunhua-Mishan fault zone,as well as the formation of the entire Yilan-Yitong fault zone.The fourth stage,in the earliest Late Cretaceous,involved the reactivation of the entire TLFZ.Following its Triassic origin due to the indentation collision,the subduction of the Paleo-Pacific Plate and the subduction and closure of the Mongol-Okhotsk Ocean were responsible for the multi-stage sinistral movements from the Late Jurassic to the Cretaceous.The evolution of the TLFZ demonstrates that a continental-scale strike-slip fault zone(>1000 km long)forms through multiple stages of propagation and linkage in dynamic settings of plate convergence.展开更多
The southern part of East Siberia(SES)is highly vulnerable to flooding caused by the extreme precipitation events(EPEs)during summer.Building on previously detected EPEs in SES and Mongolia,we examined wave propagatio...The southern part of East Siberia(SES)is highly vulnerable to flooding caused by the extreme precipitation events(EPEs)during summer.Building on previously detected EPEs in SES and Mongolia,we examined wave propagation patterns for two periods:1982-98 and 1999-2019.Our analysis revealed distinct wave train configurations and geopotential anomalies preceding EPEs,with an increase in wave activity flux across the Northern Hemisphere,followed by a subsequent decrease during EPEs.Consequently,Eastern Siberia has experienced a significant rise in wave activity.Based on geopotential anomalies over Central Siberia accompanying EPEs,we identified two main types.The first,the ridge type,is predominant during the first period and features a meridional contrast with a positive geopotential(and temperature)anomaly over Central Siberia and a negative anomaly over the subtropical regions along the same longitude.The second type,termed the trough type,is more typical for the second period.It involves either a negative geopotential anomaly or the zonal proximity of positive and negative geopotential anomalies over Central Siberia.The trough type,marked by zonally oriented anomalies in geopotential and temperature,results in a more pronounced temperature decrease before EPEs and significant zonal temperature contrasts.Further,it is related to more stationary waves over Northern Eurasia,with persistent positive geopotential anomalies over Europe linked to quasi-stationary troughs over Central Siberia and positive anomalies east of Lake Baikal.Our findings align with shifts in boreal summer teleconnection patterns,reflecting significant changes in wave propagation patterns that have occurred since the late 1990s.展开更多
Coastal near-inertial waves are usually generated by storms passing offshore and/or nearshore,and modified by the presence of the coast.They can modify coastal currents and upper-layer velocity structures,thereby affe...Coastal near-inertial waves are usually generated by storms passing offshore and/or nearshore,and modified by the presence of the coast.They can modify coastal currents and upper-layer velocity structures,thereby affecting material transport and ecosystem processes in the coastal region.The propagation characteristics of coastal near-inertial waves(CNIWs)are investigated in this study by using the Regional Ocean Circulation Modelling System(ROMS)model,forced by wind fields incorporating an idealized wind model around the typhoon center and ERA5 wind reanalysis data from ECMWF(European Center of Meteorological Weather Forecasting)beyond the typhoon center,and with realistic bathymetric data near the Guangdong coast,China.Spatial coherence analysis reveals that near-inertial energy propagates shoreward and upward along middle layers,guided by the topography.Near the coast,energy is transmitted offshore due to the presence of the coastal wall.Calculations of energy transport flux and group velocity further elucidate the wave propagation patterns,showing that near-inertial energy propagates onshore during the typhoon passage and offshore afterward.A two-layer structure of energy flux,separated by the thermocline,is identified,with variations observed between successive inertial periods.The sensitivity of CNIWs’propagation to typhoon parameters is examined through 12 experiments.A 10%increase in maximum wind velocity(V_(max)),radius of maximum wind(R_(max)),and typhoon translation speed()lead to respective changes in energy flux(−5%to+25%)and group velocity(−1%to+0.4%),highlighting their impacts on the CNIWs’energy fluxes.This study is of importance to coastal dynamics and disaster management.展开更多
Hydraulic fracture growth is significantly influenced by the minimum horizontal principal stress gradient and the fracturing fluid pressure gradient.However,these gradients are often neglected in scaled physical model...Hydraulic fracture growth is significantly influenced by the minimum horizontal principal stress gradient and the fracturing fluid pressure gradient.However,these gradients are often neglected in scaled physical modeling experiments due to difficulties in reproducing them.This study uses centrifugal hypergravity to simulate both gradients and investigate their effects on fracture propagation.Artificial mortar specimens(ϕ200 mm×400 mm)are fractured under 1g(normal gravity),50g,and 100g.Results show that compared to 1g,fractures under 50g and 100g exhibit increasingly uneven propagation,with higher g-values leading to greater asymmetry.To interpret this,a theoretical analysis based on fracture mechanics is conducted.When the fluid pressure gradient exceeds the stress gradient,a positive net gradient is generated,increasing net pressure at the lower fracture tip.This raises the stress intensity factor at the lower tip,promoting downward growth.As g increases,the disparity becomes more significant,resulting in greater fracture deviation.In conclusion,this study,for the first time,has verified and explained that the net gradient can change the propagation of hydraulic fractures,providing important guidance for wellbore placement under stress gradients.展开更多
Many existing immune detection algorithms rely on a large volume of labeled self-training samples,which are often difficult to obtain in practical scenarios,thus limiting the training of detection models.Furthermore,n...Many existing immune detection algorithms rely on a large volume of labeled self-training samples,which are often difficult to obtain in practical scenarios,thus limiting the training of detection models.Furthermore,noise inherent in the samples can substantially degrade the detection accuracy of these algorithms.To overcome these challenges,we propose an immune generation algorithm that leverages clustering and a rebound mechanism for label propagation(LP-CRI).The dataset is randomly partitioned into multiple subsets,each of which undergoes clustering followed by label propagation and evaluation.The rebound mechanism assesses the model’s performance after propagation and determines whether to revert to its previous state,initiating a subsequent round of propagation to ensure stable and effective training.Experimental results demonstrate that the proposed method is both computationally efficient and easy to train,significantly enhancing detector performance and outperforming traditional immune detection algorithms.展开更多
基金supported by the Anhui Quality Infrastructure Standardization Project(Grant No.2024MKSO7)the Science and Technology Project of State Grid(SGAHDK00DJJS2310027)the Anhui Provincial Natural Science Foundation(Grant No.2208085UD03).
文摘In electrochemical energy storage systems,the sodium-ion battery is typically integrated in the form of a“cell-module-cluster”,but its cross-scale thermal runaway triggering risk and the propagation mechanism remain unclear.This study reveals the cross-scale thermal runaway triggering and propagation behavior of sodium-ion batteries of“cell-module-cluster”under overcharge conditions,and investigates the effects of key factors,including module spacing,triggering cell location,and heat dissipation condition,on the thermal runaway propagation behavior.Results demonstrate that the thermal runaway propagation in a module containing the overcharged cell follows a sequential triggering mode,while thermal runaway in the downstream module exhibits a simultaneous triggering mode with greater severity.Furthermore,increasing the module spacing or enhancing the heat dissipation capacity can effectively reduce the heat accumulation and prevent the trigger of thermal runaway.On the above basis,the multi-dimensional evaluation strategy is proposed to quantitatively assess the hazard of sodium-ion battery cluster thermal runaway.The findings serve as a foundation for the safe design of sodium-ion batteries in energy storage systems.
基金supported by National Natural Science Foundation of China (Nos.21906124,32302202)Natural Science Foundation of Hubei Province (No.2017CFB220)Natural Science Foundation of Shandong Province (No.ZR2023MH278)。
文摘Metal organic framework(MOF) assembled with coordination bonds has the disadvantage of poor stability that limits its application in the field of stationary phase,while covalent organic framework(COF)assembled through covalent bonds exhibits excellent structural stability.It has been shown that the stationary phases prepared by combining MOF and COF can make up for the poor stability of MOF@SiO_(2),and the MOF/COF composites have superior chromatographic separation performance.However,the traditional methods for preparing COF/MOF based stationary phases are generally solvent thermal synthesis.In this study,a green and low-cost synthesis method was proposed for the preparation of MOF/COF@SiO_(2) stationary phase.Firstly,COF@SiO_(2) was prepared in a choline chloride/ethylene glycol based deep eutectic solvent(DES).Secondly,another acid-base tunable DES prepared by mixing p-toluenesulfonic acid(PTSA)and 2-methylimidazole in different proportions was introduced as the reaction solvent and reactant for rapid synthesis of MOF/COF@SiO_(2).Compared with the toxic transition metal-based MOFs selected in most previous studies,a lightweight and non-toxic S-zone metal(calcium) based MOF was employed in this study.PTSA and calcium will form the calcium/oxygen-containing organic acid framework in acidic DES,which assembles with terephthalic acid dissolved in basic DES to form MOF.The strong hydrogen bonding effect of DES can facilitate rapid assembly of Ca-MOF.The obtained Ca-MOF/COF@SiO_(2) can be used for multi-mode chromatography to efficiently separate multiple isomeric/hydrophilic/hydrophobic analytes.The synthesis method of Ca-MOF/COF@SiO_(2) is green and mild,especially the use of acid-base tunable DES promotes the rapid synthesis of non-toxic Ca-MOF/COF@silica composites,which offers an innovative approach of greenly synthesizing novel MOF/COF stationary phases and extends their applications in the field of chromatography.
基金support from the National Natural Science Foundation of China(Grant Nos.52174313 and 52304350)thank all members of the Hebei High Quality Steel Continuous Casting Engineering Technology Research Center at North China University of Science and Technology,Tangshan,China.
文摘The flow behavior of molten steel in the thin slab mold under high casting speed conditions was investigated,with a focus on the multi-mode continuous casting and rolling mold.A steel-slag two-phase flow model was established using large eddy simulation,the volume of fluid,and magnetohydrodynamics methods through numerical simulation.The maximum flow velocity and wave height at the steel-slag interface within the mold are critical evaluation criteria for analyzing asymmetric flow under varying casting speeds and electromagnetic braking.The results indicate that the asymmetric flows within the mold do not occur synchronously.The severity of the asymmetric flow correlates with the velocity difference across the steel-slag interface.A greater biased flow prolongs the time required to revert to a steady state.When the magnetic field intensity is set to 0.24 T and the magnetic pole position is at 390 mm from the steel-slag interface,this configuration can reduce the velocity of the steel-slag interface,thereby mitigating the asymmetric flow.Additionally,it can diminish the velocity,impact depth,and impact intensity on the narrow face of the jet,thus improving the distribution of velocity and turbulent kinetic energy within the mold.This configuration prolongs the time required for the steel-slag interface to transition from a stable state to its maximum velocity and shortens the time for the interface to return to stability from an unstable state.Moreover,it ensures the positional stability of the steel-slag interface,confining its position within−3 mm.
基金funded by the Science and Technology Program of State Grid Corporation of China(5500-202356358A-2-1-ZX).
文摘Arc faults within the transformers can generate sudden pressure surges,constituting significant hazards that may precipitate oil tank explosions and severely compromise power system stability.Conventional power−frequency arc discharge experiments encounter limitations in isolating pressure wave characteristics due to persistent gas generation and arc reignition.To circumvent these challenges,an oil-immersed impulse voltage discharge platform was conceived and engineered to investigate pressure wave propagation dynamics.A pressure numerical simulation model and theoretical model of oil−solid interface reflection and refraction were subsequently established to elucidate the pressure propagation mechanism.The experimental and simulation results show that the pressure wave generated by pulsed arc discharge in oil propagates radially in the form of spherical waves.Due to the viscous loss and wave front expansion of transformer oil,the peak pressure decays exponentially with distance,with a decay coefficientβ=1.15.When pressure waves encounter metal obstacles inside transformer oil,there are two propagation paths:direct transmission through and multiple reflections through,and a mode transformation of pressure waves occurs at the oil−solid interface,mainly propagating through obstacles in the form of transverse waves.This work quantitatively delineates the energy pressure wave coupling,propagation dynamics,and attenuation mechanisms,providing critical insights for assessing and mitigating arc fault-induced transformer explosion risks.
文摘Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagation behavior.To address the unclear mechanisms governing fracture penetration across coal-gangue interfaces,this study employs the Continuum-Discontinuum Element Method(CDEM)to simulate and analyze the vertical propagation of hydraulic fractures initiating within coal seams,based on geomechanical parameters derived from the deep Benxi Formation coal seams in the southeastern Ordos Basin.The investigation systematically examines the influence of geological and operational parameters on cross-interfacial fracture growth.Results demonstrate that vertical stress difference,elastic modulus contrast between coal and gangue layers,interfacial stress differential,and interfacial cohesion at coal-gangue interfaces are critical factors governing hydraulic fracture penetration through these interfaces.High vertical stress differences(>3 MPa)inhibit interfacial dilation,promoting predominant crosslayer fracture propagation.Reduced interfacial stress contrasts and enhanced interfacial cohesion facilitate fracture penetration across interfaces.Furthermore,smaller elastic modulus contrasts between coal and gangue correlate with increased interfacial aperture.Finally,lower injection rates effectively suppress vertical fracture propagation in deep coal reservoirs.This study elucidates the characteristics and mechanisms governing cross-layer fracture propagation in coal–rock composites with interbedded partings,and delineates the dynamic evolution laws and dominant controlling factors involved.Thefindings provide critical theoretical insights for the optimization of fracture design and the efficient development of deep coalbed methane reservoirs.
基金supported by the National Natural Science Foundation of China(No.52090041).
文摘The influence of different solution and aging conditions on the microstructure,impact toughness,and crack initiation and propagation mechanisms of the novel α+β titanium alloy Ti6422 was systematically investigated.By adjusting the furnace cooling time after solution treatment and the aging temperature,Ti6422 alloy samples were developed with a multi-level lamellar microstructure,in-cluding microscaleαcolonies and α_(p) lamellae,as well as nanoscale α_(s) phases.Extending the furnace cooling time after solution treatment at 920℃ for 1 h from 240 to 540 min,followed by aging at 600℃ for 6 h,increased the α_(p) lamella content,reduced the α_(s) phase content,expanded theαcolonies and α_(p) lamellae size,and improved the impact toughness from 22.7 to 53.8 J/cm^(2).Additionally,under the same solution treatment,raising the aging temperature from 500 to 700℃ resulted in a decrease in the α_(s) phase content and a growth in the thickness of the α_(p) lamella and α_(s) phase.The impact toughness increased significantly with these changes.Samples with high α_(p) lamellae content or large α_(s) phase size exhibited high crack initiation and propagation energies.Impact deformation caused severe kinking of the α_(p) lamellae in crack initiation and propagation areas,leading to a uniform and high-density kernel average misorientation(KAM)distribu-tion,enhancing plastic deformation coordination and uniformity.Moreover,the multidirectional arrangement of coarserαcolonies and α_(p) lamellae continuously deflect the crack propagation direction,inhibiting crack propagation.
基金financially supported by the National Nature Science Foundation of China(Nos.52379110 and 42207222)the Key Technologies for Accurate Diagnosis and Intelligent Prevention and Control of Slope Hazards in Open Pit Mines,181 Major R&D projects of Metallurgical Corporation of China Ltd。
文摘The stability of rock slopes is frequently controlled by the initiation and propagation of inherent dominant cracks.This study systematically investigated these processes in valley slopes by combining fracture-mechanics analysis with transparent soil model tests.An analytical expression for the stress field at the dominant crack tip was derived from the slope stress distribution by superposing the corresponding stress intensity factors(SIFs).The theoretical predictions were then validated against observations from transparent soil model tests.The influences of slope angle(β),crack inclination angle(α),crack position parameter(b),and crack length parameter(h)on crack initiation and propagation were quantified.The results indicated that:(1)cracks at the slope crest tended to propagate in shear mode,and the shear crack initiation angle(θ_(s))was approximately 8°.Cracks at the slope toe might propagate in either tensile or shear mode.(2)θ_(s) at the slope crest increased withβ,b,and l,and decreased withα.The maximum change inθ_(s) induced by the considered parameters was approximately 30°.(3)The tensile crack initiation angle(θ_(t))at the slop toe decreased withβ,α,and l,while the influence of b was comparatively minor.The maximum change inθ_(t) caused by individual parameters ranged approximately from 25°to 60°.Predicted crack propagation modes and directions showed good agreement with experimental results.These findings provide theoretical guidance for stability assessments of valley slopes controlled by dominant crack propagation.
基金supported by the National Key Research and Development Program(2021YFB150740401)National Natural Science Foundation of China(42202336)the CAS Pioneer Hundred Talents Program in China(Y826031C01)。
文摘Hydraulic stimulation technology is widely employed to enhance the permeability of geothermal reservoirs.Nevertheless,accurately predicting hydraulic fracture propagation in complex geological conditions remains challenging,thereby hindering the effective utilization of existing natural fractures.In this study,a phase field model was developed utilizing the finite element method to examine the influence of fluid presence,stress conditions,and natural fractures on the initiation and propagation of hydraulic fractures.The model employs Biot's poroelasticity theory to establish the coupling between the displacement field and the fluid field,while the phase field theory is applied to simulate fracture behavior.The results show that whenσ_(x0)/σ_(y0)<3 or qf<20 kg/(m^(3)·s),the presence of natural fractures can alter the original propagation direction of hydraulic fractures.Conversely,in the absence of these conditions,the propagation path of natural fractures is predominantly influenced by the initial stress field.Furthermore,based on the analysis of breakdown pressure and damage area,the optimal intersection angle between natural fractures and hydraulic fractures is determined to range from 45°to 60°.Finally,once a dominant channel forms,initiating and propagating hydraulic fractures in other directions becomes increasingly difficult,even in highly fractured areas.This method tackles the challenges of initiating and propagating hydraulic fractures in complex geological conditions,providing a theoretical basis for optimizing Enhanced Geothermal System(EGS)projects.
基金funded by the Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan(Grant No.AP19680589).
文摘Using the software ANSYS-19.2/Explicit Dynamics,this study performedfinite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crack,strengthened by steel wire wrapping.The effects of the thread tensile force of the steel winding in the form of single rings at the crack edges and the wires with different winding diameters and pitches were also studied.The results showed that the strengthening was preferably executed at a minimum value of the thread tensile force,which was 6.4%more effective than that at its maximum value.The analysis of the influence of the winding dia-meters showed that the equivalent stresses increased by 32%from the beginning of the crack growth until the wire broke.The increment in winding diameter decelerated the disclosure of the edge crack and reduced its length by 8.2%.The analysis of the influence of the winding pitch showed that decreasing the distance between the winding turns also led to a 33.6%reduction in the length of the straight crack and a 7.9%reduction in the maximum stres-ses on the strengthened pipeline cross-section.The analysis of the temperature effect on the pipeline material,within a range from-40℃to+50℃,resulted in a crack length change of up to 5.8%.As the temperature dropped,the crack length decreased.Within such a temperature range,the maximum stresses were observed along the cen-tral area of the crack,which were equal to 413 MPa at+50℃and 440 MPa at-40℃.The results also showed that the presence of the steel winding in the pipeline significantly reduced the length of crack propagation up to 8.4 times,depending on the temperature effect and design parameters of prestressing.This work integrated the existing methods for crack localization along steel gas pipelines.
基金National Natural Science Foundation of China(12172292,12072287)。
文摘The crack initiation and early propagation are of great significance to the overall fatigue life of material.In order to investigate the anisotropic fracture behavior of laser metal deposited Ti-6Al-4V alloy(LMD Ti64)during the early stage,the fourpoint bending fatigue test was carried out on specimens of three different directions,as well as the forged specimens.The results indicate the anisotropic crack initiation and early propagation of LMD Ti64.The direction perpendicular to the deposition direction exhibits a better fatigue resistance than the other two.The crack initiation position and propagation path are dominated by the microstructure in the vicinity of U-notch.LMD Ti64 has a typical small crack effect,and the early crack propagation velocities in three directions are similar.Affected by the slip system of LMD Ti64,secondary cracks frequently occur,which are often found to have an angle of 60°to the main crack.The electron backscatter diffraction analysis indicates that LMD Ti64 has preferred orientations,i.e.,strong 0001//Z texture and 001//Z texture.Their crystallographic orientation will change as the direction of columnarβgrains turns over,resulting in the fatigue anisotropy of LMD Ti64 in crack initiation and early crack propagation process.
基金financially supported by,the Fundamental Research Funds for the Central Universities(Grant No.2023QN1064)the China Postdoctoral Science Foundation(Grant No.2023M733772)Jiangsu Funding Program for Excellent Postdoctoral Talent(Grant No.2023ZB847)。
文摘Prepulse combined hydraulic fracturing facilitates the development of fracture networks by integrating prepulse hydraulic loading with conventional hydraulic fracturing.The formation mechanisms of fracture networks between hydraulic and pre-existing fractures under different prepulse loading parameters remain unclear.This research investigates the impact of prepulse loading parameters,including the prepulse loading number ratio(C),prepulse loading stress ratio(S),and prepulse loading frequency(f),on the formation of fracture networks between hydraulic and pre-existing fractures,using both experimental and numerical methods.The results suggest that low prepulse loading stress ratios and high prepulse loading number ratios are advantageous loading modes.Multiple hydraulic fractures are generated in the specimen under the advantageous loading modes,facilitating the development of a complex fracture network.Fatigue damage occurs in the specimen at the prepulse loading stage.The high water pressure at the secondary conventional hydraulic fracturing promotes the growth of hydraulic fractures along the damage zones.This allows the hydraulic fractures to propagate deeply and interact with pre-existing fractures.Under advantageous loading conditions,multiple hydraulic fractures can extend to pre-existing fractures,and these hydraulic fractures penetrate or propagate along pre-existing fractures.Especially when the approach angle is large,the damage range in the specimen during the prepulse loading stage increases,resulting in the formation of more hydraulic fractures.
基金supported by the National Natural Science Foundation of China(No.22288101)the 111 Project(No.B17020)。
文摘Carbon dots(CDs)-based composites have shown impressive performance in fields of information encryption and sensing,however,a great challenge is to simultaneously implement multi-mode luminescence and room-temperature phosphorescence(RTP)detection in single system due to the formidable synthesis.Herein,a multifunctional composite of Eu&CDs@p RHO has been designed by co-assembly strategy and prepared via a facile calcination and impregnation treatment.Eu&CDs@p RHO exhibits intense fluorescence(FL)and RTP coming from two individual luminous centers,Eu3+in the free pores and CDs in the interrupted structure of RHO zeolite.Unique four-mode color outputs including pink(Eu^(3+),ex.254 nm),light violet(CDs,ex.365 nm),blue(CDs,254 nm off),and green(CDs,365 nm off)could be realized,on the basis of it,a preliminary application of advanced information encoding has been demonstrated.Given the free pores of matrix and stable RTP in water of confined CDs,a visual RTP detection of Fe^(3+)ions is achieved with the detection limit as low as 9.8μmol/L.This work has opened up a new perspective for the strategic amalgamation of luminous vips with porous zeolite to construct the advanced functional materials.
基金funded by the National Natural Science Foundation of China(52104046).
文摘Multi-stage and multi-cluster fracturing(MMF)is a crucial technology in unconventional oil and gas development,aiming to enhance production by creating extensive fracture networks.However,achieving uniform expansion of multi-cluster hydraulic fractures(HFs)in MMF remains a significant challenge.Field practice has shown that the use of temporary plugging and diversion fracturing(TPDF)can promote the balanced expansion of multi-cluster HFs.This study conducted TPDF experiments using a true triaxial fracturing simulation system setting a horizontal well completion with multi-cluster jetting perforations to investigate the equilibrium initiation and extension of multi-cluster fractures.The influence of key parameters,including cluster spacing,fracturing fluid viscosity,differential stress,and fracturing fluid injection rate,on fracture initiation and propagation was systematically examined.The results indicate that while close-spaced multi-cluster fracturing significantly increases the number of HFs,it also leads to uneven extension of HFs in their propagation.In contrast,TPDF demonstrates effectiveness in mitigating uneven HF extension,increasing the number of HFs,and creating a larger stimulated reservoir volume,ultimately leading to improved oil and gas well productivity.Moreover,under conditions of high differential stress,the differential stress within the formation exerts a stronger guiding effect in HFs,which are more closely aligned with the minimum principal stress.Low-viscosity fluids facilitate rapid and extensive fracture propagation within the rock formation.High-volume fluid injection,on the other hand,more comprehensively fills the formation.Therefore,employing lowviscosity and high-volume fracturing is advantageous for the initiation and extension of multi-cluster HFs.
基金Project supported by the Chilean National Agency for Research and Development(ANID)through Grants ANID FONDECYT Regular(Nos.1211310 and 1250496)ANID Anillo de Tecnologia(No.ACT240015)the Polish National Science Centre(NCN)through Grant Agreement(No.2021/41/B/ST8/04492)。
文摘The acoustic wave propagation in gas-saturated double-porosity materials composed of a microporous matrix and mesopores with arrays of plate-type resonators is investigated.A macroscopic description,established with the two-scale asymptotic homogenization method,evidences the combined effect of inner resonances on the acoustic properties of the respective effective visco-thermal fluid.One type of resonance originates from strong pore-scale fluid-structure interaction,while the other one arises from pressure diffusion.These phenomena respectively cause weakly and highly damped resonances,which are activated by internal momentum or mass sources,and can largely influence,depending on the material's morphology,either the effective fluid's dynamic density,compressibility,or both.We introduce semi-analytical models to illustrate the key effective properties of the studied multiscale metamaterials.The results provide insights for the bottom-up design of multiscale acoustic metamaterials with exotic behaviors,such as the negative,very slow,or supersonic phase velocity,as well as sub-wavelength bandgaps.
基金supported by Natural Science Foundation of Jilin Province(No.SKL202302002)Key Research and Development project of Jilin Provincial Science and Technology Department(No.20210204142YY)+2 种基金The Science and Technology Development Program of Jilin Province(No.2020122256JC)Beijing Kechuang Medical Development Foundation Fund of China(No.KC2023-JX-0186BQ079)Talent Reserve Program(TRP),the First Hospital of Jilin University(No.JDYY-TRP-2024007)。
文摘Prostate cancer(PCa)is characterized by high incidence and propensity for easy metastasis,presenting significant challenges in clinical diagnosis and treatment.Tumor microenvironment(TME)-responsive nanomaterials provide a promising prospect for imaging-guided precision therapy.Considering that tumor-derived alkaline phosphatase(ALP)is over-expressed in metastatic PCa,it makes a great chance to develop a theranostics system with ALP responsive in the TME.Herein,an ALP-responsive aggregationinduced emission luminogens(AIEgens)nanoprobe AMNF self-assembly was designed for enhancing the diagnosis and treatment of metastatic PCa.The nanoprobe exhibited self-aggregation in the presence of ALP resulted in aggregation-induced fluorescence,and enhanced accumulation and prolonged retention period at the tumor site.In terms of detection,the fluorescence(FL)/computed tomography(CT)/magnetic resonance(MR)multi-mode imaging effect of nanoprobe was significantly improved post-aggregation,enabling precise diagnosis through the amalgamation of multiple imaging modes.Enhanced CT/MR imaging can achieve assist preoperative tumor diagnosis,and enhanced FL imaging technology can achieve“intraoperative visual navigation”,showing its potential application value in clinical tumor detection and surgical guidance.In terms of treatment,AMNF showed strong absorption in the near infrared region after aggregation,which improved the photothermal treatment effect.Overall,our work developed an effective aggregation-enhanced theranostic strategy for ALP-related cancers.
基金funded by the Ministry of Science and Technology of the People's Republic of China(Grant 2024ZD1001301)the National Natural Science Foundation of China(Grants 42272241,42102254 and 41830213)the Fundamental Research Funds for the Central Universities(Grant JZ2023HGTB0238).
文摘The approximately 3000 km long Tan-Lu fault zone(TLFZ)in East Asia is the longest continental strike-slip fault zone in the world and exemplifies how such a fault zone forms and propagates on a continental scale.Structural and geochronological data from the TLFZ and surrounding regions indicate that the fault zone originated as NE/SW-striking sinistral ductile shear zones along an oblique continental convergence margin during the Triassic indentation collision between the North China Craton and the Yangtze Block.The Triassic fault zone,with a total length of about 720 km between the Dabie and Sulu orogens,exhibited an apparent sinistral offset of approximately 300 km along the TLFZ.The second stage of sinistral movement occurred in the earliest Late Jurassic,reactivating the pre-existing southern segment and propagating northwards to the southern coastline of present-day Bohai Bay,as well as forming a significant portion of the Dunhua-Mishan fault zone.The third stage of sinistral movement,in the earliest Early Cretaceous,was the most intense strike-slip movement of the Mesozoic,leading to the complete linkage of the TLFZ.This stage included further northward propagation of the southern-middle segment,both southward and northward propagation of the Dunhua-Mishan fault zone,as well as the formation of the entire Yilan-Yitong fault zone.The fourth stage,in the earliest Late Cretaceous,involved the reactivation of the entire TLFZ.Following its Triassic origin due to the indentation collision,the subduction of the Paleo-Pacific Plate and the subduction and closure of the Mongol-Okhotsk Ocean were responsible for the multi-stage sinistral movements from the Late Jurassic to the Cretaceous.The evolution of the TLFZ demonstrates that a continental-scale strike-slip fault zone(>1000 km long)forms through multiple stages of propagation and linkage in dynamic settings of plate convergence.
文摘The southern part of East Siberia(SES)is highly vulnerable to flooding caused by the extreme precipitation events(EPEs)during summer.Building on previously detected EPEs in SES and Mongolia,we examined wave propagation patterns for two periods:1982-98 and 1999-2019.Our analysis revealed distinct wave train configurations and geopotential anomalies preceding EPEs,with an increase in wave activity flux across the Northern Hemisphere,followed by a subsequent decrease during EPEs.Consequently,Eastern Siberia has experienced a significant rise in wave activity.Based on geopotential anomalies over Central Siberia accompanying EPEs,we identified two main types.The first,the ridge type,is predominant during the first period and features a meridional contrast with a positive geopotential(and temperature)anomaly over Central Siberia and a negative anomaly over the subtropical regions along the same longitude.The second type,termed the trough type,is more typical for the second period.It involves either a negative geopotential anomaly or the zonal proximity of positive and negative geopotential anomalies over Central Siberia.The trough type,marked by zonally oriented anomalies in geopotential and temperature,results in a more pronounced temperature decrease before EPEs and significant zonal temperature contrasts.Further,it is related to more stationary waves over Northern Eurasia,with persistent positive geopotential anomalies over Europe linked to quasi-stationary troughs over Central Siberia and positive anomalies east of Lake Baikal.Our findings align with shifts in boreal summer teleconnection patterns,reflecting significant changes in wave propagation patterns that have occurred since the late 1990s.
基金The National Natural Science Foundation of China under contract No.42276169。
文摘Coastal near-inertial waves are usually generated by storms passing offshore and/or nearshore,and modified by the presence of the coast.They can modify coastal currents and upper-layer velocity structures,thereby affecting material transport and ecosystem processes in the coastal region.The propagation characteristics of coastal near-inertial waves(CNIWs)are investigated in this study by using the Regional Ocean Circulation Modelling System(ROMS)model,forced by wind fields incorporating an idealized wind model around the typhoon center and ERA5 wind reanalysis data from ECMWF(European Center of Meteorological Weather Forecasting)beyond the typhoon center,and with realistic bathymetric data near the Guangdong coast,China.Spatial coherence analysis reveals that near-inertial energy propagates shoreward and upward along middle layers,guided by the topography.Near the coast,energy is transmitted offshore due to the presence of the coastal wall.Calculations of energy transport flux and group velocity further elucidate the wave propagation patterns,showing that near-inertial energy propagates onshore during the typhoon passage and offshore afterward.A two-layer structure of energy flux,separated by the thermocline,is identified,with variations observed between successive inertial periods.The sensitivity of CNIWs’propagation to typhoon parameters is examined through 12 experiments.A 10%increase in maximum wind velocity(V_(max)),radius of maximum wind(R_(max)),and typhoon translation speed()lead to respective changes in energy flux(−5%to+25%)and group velocity(−1%to+0.4%),highlighting their impacts on the CNIWs’energy fluxes.This study is of importance to coastal dynamics and disaster management.
基金supports of Basic Science Center Program for Multiphase Evolution in Hyper-gravity of the National Natural Science Foundation of China(No.51988101)National Natural Science Foundation of China(Nos.52109138 and 52122403)Young Elite Scientists Sponsorship Program by CAST(No.2023QNRC001).
文摘Hydraulic fracture growth is significantly influenced by the minimum horizontal principal stress gradient and the fracturing fluid pressure gradient.However,these gradients are often neglected in scaled physical modeling experiments due to difficulties in reproducing them.This study uses centrifugal hypergravity to simulate both gradients and investigate their effects on fracture propagation.Artificial mortar specimens(ϕ200 mm×400 mm)are fractured under 1g(normal gravity),50g,and 100g.Results show that compared to 1g,fractures under 50g and 100g exhibit increasingly uneven propagation,with higher g-values leading to greater asymmetry.To interpret this,a theoretical analysis based on fracture mechanics is conducted.When the fluid pressure gradient exceeds the stress gradient,a positive net gradient is generated,increasing net pressure at the lower fracture tip.This raises the stress intensity factor at the lower tip,promoting downward growth.As g increases,the disparity becomes more significant,resulting in greater fracture deviation.In conclusion,this study,for the first time,has verified and explained that the net gradient can change the propagation of hydraulic fractures,providing important guidance for wellbore placement under stress gradients.
基金granted by Key Project of Beijing Municipal Social Science Foundation(No.15ZHA004)Key Project of Beijing Municipal Social Science Foundation and Beijing Municipal Education Commission Social Science Program(No.SZ20231123202).
文摘Many existing immune detection algorithms rely on a large volume of labeled self-training samples,which are often difficult to obtain in practical scenarios,thus limiting the training of detection models.Furthermore,noise inherent in the samples can substantially degrade the detection accuracy of these algorithms.To overcome these challenges,we propose an immune generation algorithm that leverages clustering and a rebound mechanism for label propagation(LP-CRI).The dataset is randomly partitioned into multiple subsets,each of which undergoes clustering followed by label propagation and evaluation.The rebound mechanism assesses the model’s performance after propagation and determines whether to revert to its previous state,initiating a subsequent round of propagation to ensure stable and effective training.Experimental results demonstrate that the proposed method is both computationally efficient and easy to train,significantly enhancing detector performance and outperforming traditional immune detection algorithms.
