In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to ...In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.展开更多
With the continuous increase of aeroengine flight ceiling(>20 km),the thin atmosphere at high altitudes and the size effect all cause the compressor component inlet Reynolds number to decrease rapidly to a critical...With the continuous increase of aeroengine flight ceiling(>20 km),the thin atmosphere at high altitudes and the size effect all cause the compressor component inlet Reynolds number to decrease rapidly to a critical value(approximately 2.0×10^(5)),and the significant transition process on the blade/endwall surface leads to the sharp degradation of compressor performance,which seriously affects the engine fuel consumption and working stability at high altitudes.In this paper,the research progress on the internal flow mechanism and flow control methods of axial compressors at low Reynolds numbers is reviewed from the aspects of quantification and prediction of performance variation,flow loss mechanism related to separation and transition,efficient transition control and flow field organization.The development trend of the low-Reynolds-number effect of axial flow compressors is noted,and the difficulties and application prospects of aerodynamic design and efficient flow control methods for compressors under low Reynolds numbers at high altitudes are discussed.展开更多
The exploitation of oil resources has now extended to ultra-deep formations,with depths even exceeding 10,000 m.During drilling operations,the bottomhole temperature(BHT)can surpass 240℃.Under such high-temperature c...The exploitation of oil resources has now extended to ultra-deep formations,with depths even exceeding 10,000 m.During drilling operations,the bottomhole temperature(BHT)can surpass 240℃.Under such high-temperature conditions,measurement while drilling(MWD)instruments are highly likely to malfunction due to the inadequate temperature resistance of their electronic components.As a wellbore temperature control approach,the application of thermal insulated drill pipe(TIDP)has been proposed to manage the wellbore temperature in ultra-deep wells.This paper developed a temperature field model for ultra-deep wells by coupling the interactions of multiple factors on the wellbore temperature.For the first time,five distinct TIDP deployment methods were proposed,and their corresponding wellbo re temperature variation characte ristics were investigated,and the heat transfer laws of the ultra-deep wellbore-formation system were quantitatively elucidated.The results revealed that TIDP can effectively restrain the rapid rise in the temperature of the drilling fluid inside the drill string by reducing the heat flux of the drill string.Among the five deployment methods,the method of deploying TIDP from the bottomhole upwards exhibits the best performance.For a 12,000 m simulated well,when6000 m of TIDP are deployed from the bottomhole upwards,the BHT decreases by 52℃,while the outlet temperature increases by merely 1℃.This not only achieves the objective of wellbore temperature control but also keeps the temperature of the drilling fluid at the outlet of annulus at a relatively low level,thereby reducing the requirements for the heat exchange equipment on the ground.The novel findings of this study provide significant guidance for wellbore temperature control in ultra-deep and ultra-high-temperature wells.展开更多
First at all, it introduced the concept and the damages of continuous cropping obstacle. Then, it analyzed the causes of continuous cropping obstacles for Atractylodes macrocephala Koidz. In the end, in order to provi...First at all, it introduced the concept and the damages of continuous cropping obstacle. Then, it analyzed the causes of continuous cropping obstacles for Atractylodes macrocephala Koidz. In the end, in order to provide guidance for pro- moting sustainable development of Atractylodes macrocephala Koidz industry in Pingjiang County, it put forward some control methods for eliminating continuous cropping obstacles of Atractylodes macrocephala Koidz, including breeding varieties with high resistance; applying rotation cropping and intercropping reasonable; rational fertilization and soil disinfection; introducing antagonistic bacterial and eliminating au- tointoxication.展开更多
Based on the dynamics of ABS-equipped vehicles during cornering braking, the electronic brake- force distribution （EBD） control methods of ABS-equipped vehicles during cornering braking are proposed. According to th...Based on the dynamics of ABS-equipped vehicles during cornering braking, the electronic brake- force distribution （EBD） control methods of ABS-equipped vehicles during cornering braking are proposed. According to the dynamics and the tire model under tire adhesion limit, the stability acceptance criteria of vehicles during cornering braking are proposed. According to the stability acceptance criteria and the ABS control, the EBD control methods of ABS-equipped vehicles during cornering braking are implemented by adjusting the threshold values of tires slip independently. The vehicle states during cornering braking at two typical initial velocities of the vehicle are analyzed by the EBD control methods, whose results indicate the EBD control methods can improve the braking performances of the vehicle during cornering braking comparing with the ABS control.展开更多
With ongoing economic,scientific,and technological developments,the electronic devices used in daily lives are developing toward precision and miniaturization,and so the demand for high-precision manufacturing machine...With ongoing economic,scientific,and technological developments,the electronic devices used in daily lives are developing toward precision and miniaturization,and so the demand for high-precision manufacturing machinery is expanding.The most important piece of equipment in modern high-precision manufacturing is the macro-micro motion platform(M3P),which offers high speed,precision,and efficiency and has macro-micro motion coupling characteristics due to its mechanical design and composition of its driving components.Therefore,the design of the control system is crucial for the overall precision of the platform;conventional proportional–integral–derivative control cannot meet the system requirements,and so M3Ps are the subject of a growing range of modern control strategies.This paper begins by describing the development history of M3Ps,followed by their platform structure and motion control system components,and then in-depth assessments of the macro,micro,and macro-micro control systems.In addition to examining the advantages and disadvantages of current macro-micro motion control,recent technological breakthroughs are noted.Finally,based on existing problems,future directions for M3P control systems are given,and the present conclusions offer guidelines for future work on M3Ps.展开更多
The surrounding rock of the soft rock roadway is seriously deformed and damaged under the superposition of mining stress and fault tectonic stress.In this paper,taking the No.232206 intake roadway in Meihuajing Coal M...The surrounding rock of the soft rock roadway is seriously deformed and damaged under the superposition of mining stress and fault tectonic stress.In this paper,taking the No.232206 intake roadway in Meihuajing Coal Mine as the engineering background,the deformation and failure law of the surrounding rock of the roadway in different fault protection pillar widths were obtained by numerical simulation method.On this basis,the mechanical model of the roadway under the action of hanging wall overburden migration and fault slip in normal faults was established,and the energy-driven mechanism of large deformation of the surrounding rock of the roadway was revealed.The ratio T of the energy applying on anchoring surrounding rock to the resistant energy of the anchored surrounding rock was defined as the criterion for the deformation of the roadway.Finally,it was calculated according to the actual working conditions on site,and the control method of“stress relief-support reinforcement”was used to support the roadway with the risk of large deformation.The on-site monitoring results show that the control effect of the surrounding rock of the roadway is obvious.展开更多
This paper is concerned with event-triggered control of discrete-time systems with or without input saturation.First,an accumulative-error-based event-triggered scheme is devised for control updates.When the accumulat...This paper is concerned with event-triggered control of discrete-time systems with or without input saturation.First,an accumulative-error-based event-triggered scheme is devised for control updates.When the accumulated error between the current state and the latest control update exceeds a certain threshold,an event is triggered.Such a scheme can ensure the event-generator works at a relatively low rate rather than falls into hibernation especially after the system steps into its steady state.Second,the looped functional method for continuous-time systems is extended to discrete-time systems.By introducing an innovative looped functional that links the event-triggered scheme,some sufficient conditions for the co-design of control gain and event-triggered parameters are obtained in terms of linear matrix inequalities with a couple of tuning parameters.Then,the proposed method is applied to discrete-time systems with input saturation.As a result,both suitable control gains and event-triggered parameters are also co-designed to ensure the system trajectories converge to the region of attraction.Finally,an unstable reactor system and an inverted pendulum system are given to show the effectiveness of the proposed method.展开更多
Metals and metalloids（termed as metals in this article）are important constituent elements of the earth＇s crust.A number of metals,if present in excess,are toxic to organisms and therefore they are usually defined a...Metals and metalloids（termed as metals in this article）are important constituent elements of the earth＇s crust.A number of metals,if present in excess,are toxic to organisms and therefore they are usually defined as toxic metals.展开更多
Unmanned Aerial Vehicle(UAV)swarm collaboration enhances mission effectiveness.However,fixed-wing UAV swarm flights face collaborative safety control problems within a limited airspace in complex environments.Aimed at...Unmanned Aerial Vehicle(UAV)swarm collaboration enhances mission effectiveness.However,fixed-wing UAV swarm flights face collaborative safety control problems within a limited airspace in complex environments.Aimed at the cooperative control problem of fixed-wing UAV swarm flights under the airspace constraints of a virtual tube in a complex environment,this paper proposes a behavior-based distributed control method for fixed-wing UAV swarm considering flight safety constraints.Considering the fixed-wing UAV swarm flight problem in complex environment,a virtual tube model based on generator curve is established.The tube keeping,centerline tracking and flight safety behavioral control strategies of the UAV swarm are designed to ensure that the UAV swarm flies along the inside of the virtual tube safety and does not go beyond its boundary.On this basis,a maneuvering decision-making method based on behavioral fusion is proposed to ensure the safe flight of UAV swarm in the restricted airspace.This cooperative control method eliminates the need for respective pre-planned trajectories,reduces communication requirements,and achieves a high level of intelligence.Simulation results show that the proposed behaviorbased UAV swarm cooperative control method is able to make the fixed-wing UAV swarm,which is faster and unable to hover,fly along the virtual tube airspace under various virtual tube shapes and different swarm sizes,and the spacing between the UAVs is larger than the minimum safe distance during the flight.展开更多
First-order proximal methods that solve linear and bilinear elliptic optimal control problems with a sparsity cost functional are discussed. In particular, fast convergence of these methods is proved. For benchmarking...First-order proximal methods that solve linear and bilinear elliptic optimal control problems with a sparsity cost functional are discussed. In particular, fast convergence of these methods is proved. For benchmarking purposes, inexact proximal schemes are compared to an inexact semismooth Newton method. Results of numerical experiments are presented to demonstrate the computational effectiveness of proximal schemes applied to infinite-dimensional elliptic optimal control problems and to validate the theoretical estimates.展开更多
This paper discusses a kind of implicit iterative methods with some variable parameters, which are called control parameters, for solving ill-posed operator equations. The theoretical results show that the new methods...This paper discusses a kind of implicit iterative methods with some variable parameters, which are called control parameters, for solving ill-posed operator equations. The theoretical results show that the new methods always lead to optimal convergence rates and have some other important features, especially the methods can be implemented parallelly.展开更多
We propose two error control techniques for numerical integrations in fast multiscale collocation methods for solving Fredholm integral equations of the second kind with weakly singular kernels. Both techniques utiliz...We propose two error control techniques for numerical integrations in fast multiscale collocation methods for solving Fredholm integral equations of the second kind with weakly singular kernels. Both techniques utilize quadratures for singular integrals using graded points. One has a polynomial order of accuracy if the integrand has a polynomial order of smoothness except at the singular point and the other has exponential order of accuracy if the integrand has an infinite order of smoothness except at the singular point. We estimate the order of convergence and computational complexity of the corresponding approximate solutions of the equation. We prove that the second technique preserves the order of convergence and computational complexity of the original collocation method. Numerical experiments are presented to illustrate the theoretical estimates.展开更多
This paper proposes a novel optimization framework in passive control techniques to reduce noise pollution.The geometries of the structures are represented by Catmull-Clark subdivision surfaces,which are able to build...This paper proposes a novel optimization framework in passive control techniques to reduce noise pollution.The geometries of the structures are represented by Catmull-Clark subdivision surfaces,which are able to build gap-free Computer-Aided Design models and meanwhile tackle the extraordinary points that are commonly encountered in geometricmodelling.The acoustic fields are simulated using the isogeometric boundary elementmethod,and a density-based topology optimization is conducted to optimize distribution of sound-absorbing materials adhered to structural surfaces.The approach enables one to perform acoustic optimization from Computer-Aided Design models directly without needingmeshing and volume parameterization,thereby avoiding the geometric errors and time-consuming preprocessing steps in conventional simulation and optimization methods.The effectiveness of the present method is demonstrated by three dimensional numerical examples.展开更多
The active equalization of lithium-ion batteries involves transferring energy from high-voltage cells to low-voltage cells,ensuring consistent voltage levels across the battery pack and maintaining safety.This paper p...The active equalization of lithium-ion batteries involves transferring energy from high-voltage cells to low-voltage cells,ensuring consistent voltage levels across the battery pack and maintaining safety.This paper presents a voltage balancing circuit and control method.First,a single capacitor method is used to design the circuit topology for energy transfer.Next,real-time voltage detection and control are employed to balance energy between cells.Finally,simulation and experimental results demonstrate the effectiveness of the proposed method,achieving balanced voltages of 3.97 V from initial voltages of 4.10,3.97,and 3.90 V.The proposed circuit is simple,reliable,and effectively prevents overcharge and overdischarge.展开更多
The topology structure of the artificial neural network is an intelligent control model,which is used for the intelligent vehicle control system and household sweeping robot.When setting the intelligent control system...The topology structure of the artificial neural network is an intelligent control model,which is used for the intelligent vehicle control system and household sweeping robot.When setting the intelligent control system,the connection point of each network is regarded as a neuron in the nervous system,and each connection point has input and output functions.Only when the input of nodes reaches a certain threshold can the output function of nodes be stimulated.Using the networking mode of the artificial neural network model,the mobile node can output in multiple directions.If the input direction of a certain path is the same as that of other nodes,it can choose to avoid and choose another path.The weighted value of each path between nodes is different,which means that the influence of the front node on the current node varies.The control method based on the artificial neural network model can be applied to vehicle control,household sweeping robots,and other fields,and a relatively optimized scheme can be obtained from the aspect of time and energy consumption.展开更多
This paper presents state space methods for decentralized Hoe control, which contain two respects: a parametrization approach and an iterative algorithm. For large scale systems with N subsystems, decentralized Hoe c...This paper presents state space methods for decentralized Hoe control, which contain two respects: a parametrization approach and an iterative algorithm. For large scale systems with N subsystems, decentralized Hoe con trollers can be derived by a parametrization result for centralized Her: controllers and designed by an iterative algorithm with structured constraint to the controllers.展开更多
In the aerospace field, residual stress directly affects the strength, fatigue life and dimensional stability of thin-walled structural components, and is a key factor to ensure flight safety and reliability. At prese...In the aerospace field, residual stress directly affects the strength, fatigue life and dimensional stability of thin-walled structural components, and is a key factor to ensure flight safety and reliability. At present, research on residual stress at home and abroad mainly focuses on the optimization of traditional detection technology, stress control of manufacturing process and service performance evaluation, among which research on residual stress detection methods mainly focuses on the improvement of the accuracy, sensitivity, reliability and other performance of existing detection methods, but it still faces many challenges such as extremely small detection range, low efficiency, large error and limited application range.展开更多
Variable Cycle Engine(VCE)serves as the core system in achieving future advanced fighters with cross-generational performance and mission versatility.However,the resultant complex configuration and strong coupling of ...Variable Cycle Engine(VCE)serves as the core system in achieving future advanced fighters with cross-generational performance and mission versatility.However,the resultant complex configuration and strong coupling of control parameters present significant challenges in designing acceleration and deceleration control schedules.To thoroughly explore the performance potential of engine,a global integration design method for acceleration and deceleration control schedule based on inner and outer loop optimization is proposed.The outer loop optimization module employs Integrated Surrogate-Assisted Co-Differential Evolutionary(ISACDE)algorithm to optimize the variable geometry adjustment laws based on B-spline curve,and the inner loop optimization module adopts the fixed-state method to design the open-loop fuel–air ratio control schedules,which are aimed at minimizing the acceleration and deceleration time under multiple constraints.Simulation results demonstrate that the proposed global integration design method not only furthest shortens the acceleration and deceleration time,but also effectively safeguards the engine from overlimit.展开更多
基金Supported in part by Natural Science Foundation of Guangxi(2023GXNSFAA026246)in part by the Central Government's Guide to Local Science and Technology Development Fund(GuikeZY23055044)in part by the National Natural Science Foundation of China(62363003)。
文摘In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.
基金co-supported by the National Natural Science Foundation of China(No.52306053)the Science Center for Gas Turbine Project,China(No.P2022-B-Ⅱ-005-001)the National Science and Technology Major Project of China(No.2017-Ⅱ-0010-0024)。
文摘With the continuous increase of aeroengine flight ceiling(>20 km),the thin atmosphere at high altitudes and the size effect all cause the compressor component inlet Reynolds number to decrease rapidly to a critical value(approximately 2.0×10^(5)),and the significant transition process on the blade/endwall surface leads to the sharp degradation of compressor performance,which seriously affects the engine fuel consumption and working stability at high altitudes.In this paper,the research progress on the internal flow mechanism and flow control methods of axial compressors at low Reynolds numbers is reviewed from the aspects of quantification and prediction of performance variation,flow loss mechanism related to separation and transition,efficient transition control and flow field organization.The development trend of the low-Reynolds-number effect of axial flow compressors is noted,and the difficulties and application prospects of aerodynamic design and efficient flow control methods for compressors under low Reynolds numbers at high altitudes are discussed.
基金supported by the National Natural Science Foundation of China(Grant No.U22B2072)Research Project of China Petroleum Science and Technology Innovation Fund(Grant No.2025DQ02-0144)。
文摘The exploitation of oil resources has now extended to ultra-deep formations,with depths even exceeding 10,000 m.During drilling operations,the bottomhole temperature(BHT)can surpass 240℃.Under such high-temperature conditions,measurement while drilling(MWD)instruments are highly likely to malfunction due to the inadequate temperature resistance of their electronic components.As a wellbore temperature control approach,the application of thermal insulated drill pipe(TIDP)has been proposed to manage the wellbore temperature in ultra-deep wells.This paper developed a temperature field model for ultra-deep wells by coupling the interactions of multiple factors on the wellbore temperature.For the first time,five distinct TIDP deployment methods were proposed,and their corresponding wellbo re temperature variation characte ristics were investigated,and the heat transfer laws of the ultra-deep wellbore-formation system were quantitatively elucidated.The results revealed that TIDP can effectively restrain the rapid rise in the temperature of the drilling fluid inside the drill string by reducing the heat flux of the drill string.Among the five deployment methods,the method of deploying TIDP from the bottomhole upwards exhibits the best performance.For a 12,000 m simulated well,when6000 m of TIDP are deployed from the bottomhole upwards,the BHT decreases by 52℃,while the outlet temperature increases by merely 1℃.This not only achieves the objective of wellbore temperature control but also keeps the temperature of the drilling fluid at the outlet of annulus at a relatively low level,thereby reducing the requirements for the heat exchange equipment on the ground.The novel findings of this study provide significant guidance for wellbore temperature control in ultra-deep and ultra-high-temperature wells.
文摘First at all, it introduced the concept and the damages of continuous cropping obstacle. Then, it analyzed the causes of continuous cropping obstacles for Atractylodes macrocephala Koidz. In the end, in order to provide guidance for pro- moting sustainable development of Atractylodes macrocephala Koidz industry in Pingjiang County, it put forward some control methods for eliminating continuous cropping obstacles of Atractylodes macrocephala Koidz, including breeding varieties with high resistance; applying rotation cropping and intercropping reasonable; rational fertilization and soil disinfection; introducing antagonistic bacterial and eliminating au- tointoxication.
基金the National Natural Science Foundation of China (50122155)
文摘Based on the dynamics of ABS-equipped vehicles during cornering braking, the electronic brake- force distribution （EBD） control methods of ABS-equipped vehicles during cornering braking are proposed. According to the dynamics and the tire model under tire adhesion limit, the stability acceptance criteria of vehicles during cornering braking are proposed. According to the stability acceptance criteria and the ABS control, the EBD control methods of ABS-equipped vehicles during cornering braking are implemented by adjusting the threshold values of tires slip independently. The vehicle states during cornering braking at two typical initial velocities of the vehicle are analyzed by the EBD control methods, whose results indicate the EBD control methods can improve the braking performances of the vehicle during cornering braking comparing with the ABS control.
基金This research was supported financially by the China Postdoctoral Science Foundation,the National Natural Science Foundation of China(Grant No.51705132)the Young Backbone Teacher Training Program in Henan University of Technology,the Education Department of Henan Province Natural Science Project(Grant No.21A460006)the Natural Science Project of Henan Provincial Department of Science and Technology(Grant No.222102220088).
文摘With ongoing economic,scientific,and technological developments,the electronic devices used in daily lives are developing toward precision and miniaturization,and so the demand for high-precision manufacturing machinery is expanding.The most important piece of equipment in modern high-precision manufacturing is the macro-micro motion platform(M3P),which offers high speed,precision,and efficiency and has macro-micro motion coupling characteristics due to its mechanical design and composition of its driving components.Therefore,the design of the control system is crucial for the overall precision of the platform;conventional proportional–integral–derivative control cannot meet the system requirements,and so M3Ps are the subject of a growing range of modern control strategies.This paper begins by describing the development history of M3Ps,followed by their platform structure and motion control system components,and then in-depth assessments of the macro,micro,and macro-micro control systems.In addition to examining the advantages and disadvantages of current macro-micro motion control,recent technological breakthroughs are noted.Finally,based on existing problems,future directions for M3P control systems are given,and the present conclusions offer guidelines for future work on M3Ps.
基金Projects(52374094,52374218,52174122)supported by the National Natural Science Foundation of ChinaProject(ZR2022YQ49)supported by the Excellent Youth Fund of Shandong Natural Science Foundation,ChinaProjects(tspd20210313,tsqn202211150)supported by the Taishan Scholar Project in Shandong Province,China。
文摘The surrounding rock of the soft rock roadway is seriously deformed and damaged under the superposition of mining stress and fault tectonic stress.In this paper,taking the No.232206 intake roadway in Meihuajing Coal Mine as the engineering background,the deformation and failure law of the surrounding rock of the roadway in different fault protection pillar widths were obtained by numerical simulation method.On this basis,the mechanical model of the roadway under the action of hanging wall overburden migration and fault slip in normal faults was established,and the energy-driven mechanism of large deformation of the surrounding rock of the roadway was revealed.The ratio T of the energy applying on anchoring surrounding rock to the resistant energy of the anchored surrounding rock was defined as the criterion for the deformation of the roadway.Finally,it was calculated according to the actual working conditions on site,and the control method of“stress relief-support reinforcement”was used to support the roadway with the risk of large deformation.The on-site monitoring results show that the control effect of the surrounding rock of the roadway is obvious.
基金supported in part by the National Natural Science Foundation of China(62473221)the Natural Science Foundation of Shandong Province,China(ZR2024MF006)Qingdao Natural Science Foundation(24-4-4-zrjj-165-jch)。
文摘This paper is concerned with event-triggered control of discrete-time systems with or without input saturation.First,an accumulative-error-based event-triggered scheme is devised for control updates.When the accumulated error between the current state and the latest control update exceeds a certain threshold,an event is triggered.Such a scheme can ensure the event-generator works at a relatively low rate rather than falls into hibernation especially after the system steps into its steady state.Second,the looped functional method for continuous-time systems is extended to discrete-time systems.By introducing an innovative looped functional that links the event-triggered scheme,some sufficient conditions for the co-design of control gain and event-triggered parameters are obtained in terms of linear matrix inequalities with a couple of tuning parameters.Then,the proposed method is applied to discrete-time systems with input saturation.As a result,both suitable control gains and event-triggered parameters are also co-designed to ensure the system trajectories converge to the region of attraction.Finally,an unstable reactor system and an inverted pendulum system are given to show the effectiveness of the proposed method.
文摘Metals and metalloids（termed as metals in this article）are important constituent elements of the earth＇s crust.A number of metals,if present in excess,are toxic to organisms and therefore they are usually defined as toxic metals.
基金co-supported by the National Natural Science Foundation of China(No.61903350)the Ministry of Education industry-university-research innovation project,China(No.2021ZYA02002)the Beijing Institute of Technology Research Fund Program for Young Scholars,China(No.3010011182130)。
文摘Unmanned Aerial Vehicle(UAV)swarm collaboration enhances mission effectiveness.However,fixed-wing UAV swarm flights face collaborative safety control problems within a limited airspace in complex environments.Aimed at the cooperative control problem of fixed-wing UAV swarm flights under the airspace constraints of a virtual tube in a complex environment,this paper proposes a behavior-based distributed control method for fixed-wing UAV swarm considering flight safety constraints.Considering the fixed-wing UAV swarm flight problem in complex environment,a virtual tube model based on generator curve is established.The tube keeping,centerline tracking and flight safety behavioral control strategies of the UAV swarm are designed to ensure that the UAV swarm flies along the inside of the virtual tube safety and does not go beyond its boundary.On this basis,a maneuvering decision-making method based on behavioral fusion is proposed to ensure the safe flight of UAV swarm in the restricted airspace.This cooperative control method eliminates the need for respective pre-planned trajectories,reduces communication requirements,and achieves a high level of intelligence.Simulation results show that the proposed behaviorbased UAV swarm cooperative control method is able to make the fixed-wing UAV swarm,which is faster and unable to hover,fly along the virtual tube airspace under various virtual tube shapes and different swarm sizes,and the spacing between the UAVs is larger than the minimum safe distance during the flight.
文摘First-order proximal methods that solve linear and bilinear elliptic optimal control problems with a sparsity cost functional are discussed. In particular, fast convergence of these methods is proved. For benchmarking purposes, inexact proximal schemes are compared to an inexact semismooth Newton method. Results of numerical experiments are presented to demonstrate the computational effectiveness of proximal schemes applied to infinite-dimensional elliptic optimal control problems and to validate the theoretical estimates.
基金This work was supported by the National Natural Science Foundation of China
文摘This paper discusses a kind of implicit iterative methods with some variable parameters, which are called control parameters, for solving ill-posed operator equations. The theoretical results show that the new methods always lead to optimal convergence rates and have some other important features, especially the methods can be implemented parallelly.
基金The NNSF (10371137 and 10201034) of Chinathe Foundation (20030558008) of Doctoral Program of National Higher Education, Guangdong Provincial Natural Science Foundation (1011170) of China and the Advanced Research Foundation of Zhongshan UniversityThe US National Science Foundation (9973427 and 0312113)NSF (10371122) of China and the Chinese Academy of Sciences under the program of "Hundred Distinguished Young Chinese Scientists."
文摘We propose two error control techniques for numerical integrations in fast multiscale collocation methods for solving Fredholm integral equations of the second kind with weakly singular kernels. Both techniques utilize quadratures for singular integrals using graded points. One has a polynomial order of accuracy if the integrand has a polynomial order of smoothness except at the singular point and the other has exponential order of accuracy if the integrand has an infinite order of smoothness except at the singular point. We estimate the order of convergence and computational complexity of the corresponding approximate solutions of the equation. We prove that the second technique preserves the order of convergence and computational complexity of the original collocation method. Numerical experiments are presented to illustrate the theoretical estimates.
基金We acknowledge the support of the National Natural Science Foundation of China(NSFC)under Grant Nos.51904202 and 11702238Stephane Bordas thanks the financial support of Intuitive modeling and SIMulation platform(IntuiSIM)(PoC17/12253887)grant by Luxembourg National Research Fund.
文摘This paper proposes a novel optimization framework in passive control techniques to reduce noise pollution.The geometries of the structures are represented by Catmull-Clark subdivision surfaces,which are able to build gap-free Computer-Aided Design models and meanwhile tackle the extraordinary points that are commonly encountered in geometricmodelling.The acoustic fields are simulated using the isogeometric boundary elementmethod,and a density-based topology optimization is conducted to optimize distribution of sound-absorbing materials adhered to structural surfaces.The approach enables one to perform acoustic optimization from Computer-Aided Design models directly without needingmeshing and volume parameterization,thereby avoiding the geometric errors and time-consuming preprocessing steps in conventional simulation and optimization methods.The effectiveness of the present method is demonstrated by three dimensional numerical examples.
基金funded by the Basic Science(Natural Science)Research Project of Colleges and Universities in Jiangsu Province,Grant Number 22KJD470002.
文摘The active equalization of lithium-ion batteries involves transferring energy from high-voltage cells to low-voltage cells,ensuring consistent voltage levels across the battery pack and maintaining safety.This paper presents a voltage balancing circuit and control method.First,a single capacitor method is used to design the circuit topology for energy transfer.Next,real-time voltage detection and control are employed to balance energy between cells.Finally,simulation and experimental results demonstrate the effectiveness of the proposed method,achieving balanced voltages of 3.97 V from initial voltages of 4.10,3.97,and 3.90 V.The proposed circuit is simple,reliable,and effectively prevents overcharge and overdischarge.
文摘The topology structure of the artificial neural network is an intelligent control model,which is used for the intelligent vehicle control system and household sweeping robot.When setting the intelligent control system,the connection point of each network is regarded as a neuron in the nervous system,and each connection point has input and output functions.Only when the input of nodes reaches a certain threshold can the output function of nodes be stimulated.Using the networking mode of the artificial neural network model,the mobile node can output in multiple directions.If the input direction of a certain path is the same as that of other nodes,it can choose to avoid and choose another path.The weighted value of each path between nodes is different,which means that the influence of the front node on the current node varies.The control method based on the artificial neural network model can be applied to vehicle control,household sweeping robots,and other fields,and a relatively optimized scheme can be obtained from the aspect of time and energy consumption.
文摘This paper presents state space methods for decentralized Hoe control, which contain two respects: a parametrization approach and an iterative algorithm. For large scale systems with N subsystems, decentralized Hoe con trollers can be derived by a parametrization result for centralized Her: controllers and designed by an iterative algorithm with structured constraint to the controllers.
文摘In the aerospace field, residual stress directly affects the strength, fatigue life and dimensional stability of thin-walled structural components, and is a key factor to ensure flight safety and reliability. At present, research on residual stress at home and abroad mainly focuses on the optimization of traditional detection technology, stress control of manufacturing process and service performance evaluation, among which research on residual stress detection methods mainly focuses on the improvement of the accuracy, sensitivity, reliability and other performance of existing detection methods, but it still faces many challenges such as extremely small detection range, low efficiency, large error and limited application range.
基金supported by the Basic Research on Dynamic Real-time Modeling and Onboard Adaptive Modeling of Aero Engine,China(No.QZPY202308)。
文摘Variable Cycle Engine(VCE)serves as the core system in achieving future advanced fighters with cross-generational performance and mission versatility.However,the resultant complex configuration and strong coupling of control parameters present significant challenges in designing acceleration and deceleration control schedules.To thoroughly explore the performance potential of engine,a global integration design method for acceleration and deceleration control schedule based on inner and outer loop optimization is proposed.The outer loop optimization module employs Integrated Surrogate-Assisted Co-Differential Evolutionary(ISACDE)algorithm to optimize the variable geometry adjustment laws based on B-spline curve,and the inner loop optimization module adopts the fixed-state method to design the open-loop fuel–air ratio control schedules,which are aimed at minimizing the acceleration and deceleration time under multiple constraints.Simulation results demonstrate that the proposed global integration design method not only furthest shortens the acceleration and deceleration time,but also effectively safeguards the engine from overlimit.
