Strong surface impact will produce strong vibration,which will pose a threat to the safety of nearby buried pipelines and other important lifeline projects.Based on the verified numerical method,a comprehensive numeri...Strong surface impact will produce strong vibration,which will pose a threat to the safety of nearby buried pipelines and other important lifeline projects.Based on the verified numerical method,a comprehensive numerical parameter analysis is conducted on the key influencing factors of the vibration isolation hole(VIH),which include hole diameter,hole net spacing,hole depth,hole number,hole arrangement,and soil parameters.The results indicate that a smaller ratio of net spacing to hole diameter,the deeper the hole,the multi-row hole,the hole adoption of staggered arrangements,and better site soil conditions can enhance the efficiency of the VIH barrier.The average maximum vibration reduction efficiency within the vibration isolation area can reach 42.2%.The vibration safety of adjacent oil pipelines during a dynamic compaction projection was evaluated according to existing standards,and the measurement of the VIH was recommended to reduce excessive vibration.The single-row vibration isolation scheme and three-row staggered arrangement with the same hole parameters are suggested according to different cases.The research findings can serve as a reference for the vibration safety analysis,assessment,and control of adjacent underground facilities under the influence of strong surface impact loads.展开更多
Due to space constraints in mountainous areas,twin tunnels are sometimes constructed very close to each other or even overlap.This proximity challenges the structural stability of tunnels built with the drill-and-blas...Due to space constraints in mountainous areas,twin tunnels are sometimes constructed very close to each other or even overlap.This proximity challenges the structural stability of tunnels built with the drill-and-blast method,as the short propagation distance amplifies blasting vibrations.A case of blasting damage is reported in this paper,where concrete cracks crossed construction joints in the twin-arch lining.To identify the causes of these cracks and develop effective vibration mitigation measures,field monitoring and numerical analysis were conducted.Specifically,a restart method was used to simulate the second peak particle velocity(PPV)of MS3 delays occurring 50 ms after the MS1 delays.The study found that the dynamic tensile stress in the tunnel induced by the blast wave has a linear relationship with the of the product of the concrete wave impedance and the PPV.A blast vibration velocity exceeding 23.3 cm/s resulted in tensile stress in the lining surpassing the ultimate tensile strength of C30 concrete,leading to tensile cracking on the blast-facing arch of the constructed tunnel.To control excessive vi-bration velocity,a mitigation trench was implemented to reduce blast wave impact.The trench,approximately 15 m in length,50 cm in width,and 450 cm in height,effectively lowered vibration ve-locities,achieving an average reduction rate of 52%according to numerical analysis.A key innovation of this study is the on-site implementation and validation of the trench's effectiveness in mitigating vi-brations.A feasible trench construction configuration was proposed to overcome the limitations of a single trench in fully controlling vibrations.To further enhance protection,zoned blasting and an auxiliary rock pillar,80 cm in width,were incorporated to reinforce the mid-wall.This study introduces novel strategies for vibration protection in tunnel blasting,offering innovative solutions to address blasting-induced vibrations and effectively minimize their impact,thereby enhancing safety and struc-tural stability.展开更多
The composite structures/components made by friction stir lap welding(FSLW)of Mg alloy sheet and Al alloy sheet are of wide application potentials in the manufacturing sector of transportation vehicles.To further impr...The composite structures/components made by friction stir lap welding(FSLW)of Mg alloy sheet and Al alloy sheet are of wide application potentials in the manufacturing sector of transportation vehicles.To further improve the joint quality,the ultrasonic vibration(UV)is exerted in FSLW,and the UV enhanced FSLW(UVeFSLW)was developed for making Mg-to-Al dissimilar joints.The numerical analysis and experimental investigation were combined to study the process mechanism in Mg/Al UVeFSLW.An equation related to the temperature and strain rate was derived to calculate the grain size at different locations of the weld nugget zone,and the effect of grain size distribution on the threshold thermal stress was included,so that the prediction accuracy of flow stress was further improved.With such modified constitutive equation,the numerical simulation was conducted to compare the heat generation,temperature profiles and material flow behaviors in Mg/Al UVeFSLW/FSLW processes.It was found that the exerted UV decreased the temperature at two checking points on the tool/workpiece interface from 707/671 K in FSLW to 689/660 K in UVeFSLW,which suppressed the IMCs thickness at Mg-Al interface from 1.7μm in FSLW to 1.1μm in UVeFSLW.The exerted UV increased the horizontal materials flow ability,and decreased the upward flow ability,which resulted in the increase of effective sheet thickness/effective lap width from 2.01/3.70 mm in FSLW to 2.04/4.84 mm in UVeFSLW.Therefore,the ultrasonic vibration improved the tensile shear strength of Mg-to-Al lap joints by 18%.展开更多
Superior strength and high-temperature performance make γ-TiAl vital for lightweight aero-engines. However, its inherent brittleness poses machining problems. This study employed Elliptical Ultrasonic Vibration Milli...Superior strength and high-temperature performance make γ-TiAl vital for lightweight aero-engines. However, its inherent brittleness poses machining problems. This study employed Elliptical Ultrasonic Vibration Milling (EUVM) to address these problems. Considering the influence of machining parameters on vibration patterns of EUVM, a separation time model was established to analyze the vibration evolutionary process, thereby instructing the cutting mechanism. On this basis, deep discussions regarding chip formation, cutting force, edge breakage, and subsurface layer deformation were conducted for EUVM and Conventional Milling (CM). Chip morphology showed the chip formation was rooted in the periodic brittle fracture. Local dimples proved that the thermal effect of high-speed cutting improved the plasticity of γ-TiAl. EUVM achieved a maximum 18.17% reduction in cutting force compared with CM. The force variation mechanism differed with changes in the cutting speed or the vibration amplitude, and its correlation with thermal softening, strain hardening, and vibratory cutting effects was analyzed. EUVM attained desirable edge breakage by achieving smaller fracture lengths. The fracture mechanisms of different phases were distinct, causing a surge in edge fracture size of γ-TiAl under microstructural differences. In terms of subsurface deformation, EUVM also showed strengthening effects. Noteworthy, the lamellar deformation patterns under the cutting removal state differed from the quasi-static, which was categorized by the orientation angles. Additionally, the electron backscattering diffraction provided details of the influence of microstructural difference on the orientation and the deformation of grains in the subsurface layer. The results demonstrate that EUVM is a promising machining method for γ-TiAl and guide further research and development of EUVM γ-TiAl.展开更多
The vibration response and noise caused by subway trains can affect the safety and comfort of superstructures.To study the dynamic response characteristics of subway stations and superstructures under train loads with...The vibration response and noise caused by subway trains can affect the safety and comfort of superstructures.To study the dynamic response characteristics of subway stations and superstructures under train loads with a hard combination,a numerical model is developed in this study.The indoor model test verified the accuracy of the numerical model.The influence laws of different hard combinations,train operating speeds and modes were studied and evaluated accordingly.The results show that the frequency corresponding to the peak vibration acceleration level of each floor of the superstructure property is concentrated at 10–20 Hz.The vibration response decreases in the high-frequency parts and increases in the lowfrequency parts with increasing distance from the source.Furthermore,the factors,such as train operating speed,operating mode,and hard combination type,will affect the vibration of the superstructure.The vibration response under the reversible operation of the train is greater than that of the unidirectional operation.The operating speed of the train is proportional to its vibration response.The vibration amplification area appears between the middle and the top of the superstructure at a higher train speed.Its vibration acceleration level will exceed the limit value of relevant regulations,and vibration-damping measures are required.Within the scope of application,this study provides some suggestions for constructing subway stations and superstructures.展开更多
A numerical simulation analysis is conducted to examine the unsteady hydrodynamic characteristics of vortex-induced vibration(VIV)and the suppression effect of helical strakes on VIV in subsea pipelines.The analysis u...A numerical simulation analysis is conducted to examine the unsteady hydrodynamic characteristics of vortex-induced vibration(VIV)and the suppression effect of helical strakes on VIV in subsea pipelines.The analysis uses the standard k−εturbulence model for 4.5-and 12.75-inch pipes,and its accuracy is verified by comparing the results with large-scale hydrodynamic experiments.These experiments are designed to evaluate the suppression efficiency of VIV with and without helical strakes,focusing on displacement and drag coefficients under different flow conditions.Furthermore,the influence of important geometric parameters of the helical strakes on drag coefficients and VIV suppression efficiency at different flow rates is compared and discussed.Numerical results agree well with experimental data for drag coefficient and vortex shedding frequency.Spring-pipe self-excited vibration experimental tests reveal that the installation of helical strakes substantially reduces the drag coefficient of VIV within a certain flow rate range,achieving suppression efficiencies exceeding 90%with strake heights larger than 0.15D.Notably,the optimized parameter combination of helical strakes,with a pitch of 15D,a fin height of 0.2D,and 45°edge slopes,maintains high suppression efficiency,thereby exhibiting superior performance.This study provides a valuable reference for the design and application of helical strakes and VIV suppression in subsea engineering.展开更多
An experimental analysis of the slug-induced vibration(SIV)of a flexible catenary riser with an aspect ratio of 130 is reported in this work.The vibration responses and internal slug flow details at different gas-liqu...An experimental analysis of the slug-induced vibration(SIV)of a flexible catenary riser with an aspect ratio of 130 is reported in this work.The vibration responses and internal slug flow details at different gas-liquid ratios(Q_(g)/Q_(l))and mixture velocities(vm)are non-intrusively and simultaneously captured by high-speed cameras.Both the in-plane and out-of-plane responses of the catenary riser are excited in all considered cases.The slug flow characteristics,including translational velocities,slug lengths,recurrence frequencies,and pressure variations,are analyzed and dis-cussed,as are the dynamic responses of the riser in terms of the amplitudes,space-varying frequency,and modal weight.The dominant modal response based on the root-mean-square amplitude profiles does not match that based on the dominant frequency.Three mode switching types are identified based on the RMS amplitude profiles and the dominant frequency.When vm is small,no mode switching(NMS)is observed in either the in-plane or out-of-plane responses.For mode switching I(MS I),the switching between the first and second modes in the in-plane response is induced by slug flow with different recurrence frequencies in cases of large Q_(g)/Q_(l).However,there is no mode switching in the out-of-plane response.The switching between the first and third modes for the in-plane response and the second and fourth modes for the out-of-plane response(MS II)occurs in cases of relatively high vm and low Q_(g)/Q_(l).展开更多
The gear transmission system directly affects the operational performance of high-speed trains(HST).However,current research on gear transmission systems of HST often overlooks the effects of gear eccentricity and run...The gear transmission system directly affects the operational performance of high-speed trains(HST).However,current research on gear transmission systems of HST often overlooks the effects of gear eccentricity and running resistance,and the dynamic models of gear transmission system are not sufficiently comprehensive.This paper aims to establish an electromechanical coupling dynamic model of HST traction transmission system and study its electromechanical coupling vibration characteristics,in which the internal excitation factors such as gear eccentricity,time-varying meshing stiffness,backlash,meshing error,and external excitation factors such as electromagnetic torque and running resistance are stressed.The research results indicate that gear eccentricity and running resistance have a significant impact on the stability of the system,and gear eccentricity leads to intensified system vibration and decreased anti-interference ability.In addition,the characteristic frequency of gear eccentricity can be extracted from mechanical signals and current signals as a preliminary basis for eccentricity detection,and electrical signals can also be used to monitor changes in train running resistance in real time.The results of this study provide some useful insights into designing dynamic performance parameters for HST transmission systems and monitoring train operational states.展开更多
BiVO_(4)porous spheres modified by ZnO were designed and synthesized using a facile two-step method.The resulting ZnO/BiVO_(4)composite catalysts have shown remarkable efficiency as piezoelectric catalysts for degradi...BiVO_(4)porous spheres modified by ZnO were designed and synthesized using a facile two-step method.The resulting ZnO/BiVO_(4)composite catalysts have shown remarkable efficiency as piezoelectric catalysts for degrading Rhodamine B(RhB)unde mechanical vibrations,they exhibit superior activity compared to pure ZnO.The 40wt%ZnO/BiVO_(4)heterojunction composite displayed the highest activity,along with good stability and recyclability.The enhanced piezoelectric catalytic activity can be attributed to the form ation of an I-scheme heterojunction structure,which can effectively inhibit the electron-hole recombination.Furthermore,hole(h+)and superoxide radical(·O_(2)^(-))are proved to be the primary active species.Therefore,ZnO/BiVO_(4)stands as an efficient and stable piezoelectric catalyst with broad potential application in the field of environmental water pollution treatment.展开更多
In general,the rapid growth of α-Fe clusters is a challenge in high Fe-content Fe-based amorphous alloys,negatively affecting their physical properties.Herein,we introduce an efficient and rapid post-treatment techni...In general,the rapid growth of α-Fe clusters is a challenge in high Fe-content Fe-based amorphous alloys,negatively affecting their physical properties.Herein,we introduce an efficient and rapid post-treatment technique known as ultrasonic vibration rapid processing(UVRP),which enables the formation of high-density strong magnetic α-Fe clusters,thereby enhancing the soft magnetic properties of Fe_(78)Si(13)B_(9) amorphous alloy ribbon.展开更多
This study examines the adaptive boundary control problem of flexible marine riser with internal flow coupling.The dynamic model of the flexible marine riser system with internal flow coupling is derived using the Ham...This study examines the adaptive boundary control problem of flexible marine riser with internal flow coupling.The dynamic model of the flexible marine riser system with internal flow coupling is derived using the Hamiltonian principle.An analysis of internal flow’s influence on the vibration characteristics of flexible marine risers is conducted.Then,for the uncertain environmental disturbance,the adaptive fuzzy logic system is introduced to dynamically approximate the boundary disturbance,and a robust adaptive fuzzy boundary control is proposed.The uniform boundedness of the closed-loop system is proved based on Lyapunov theory.The well-posedness of the closed-loop system is proved by operator semigroup theory.The proposed control’s effectiveness is validated through comparison with existing control methods.展开更多
To explore the relationship between dynamic characteristics and wake patterns,numerical simulations were conducted on three equal-diameter cylinders arranged in an equilateral triangle.The simulations varied reduced v...To explore the relationship between dynamic characteristics and wake patterns,numerical simulations were conducted on three equal-diameter cylinders arranged in an equilateral triangle.The simulations varied reduced velocities and gap spacing to observe flow-induced vibrations(FIVs).The immersed boundary–lattice Boltzmann flux solver(IB–LBFS)was applied as a numerical solution method,allowing for straightforward application on a simple Cartesian mesh.The accuracy and rationality of this method have been verified through comparisons with previous numerical results,including studies on flow past three stationary circular cylinders arranged in a similar pattern and vortex-induced vibrations of a single cylinder across different reduced velocities.When examining the FIVs of three cylinders,numerical simulations were carried out across a range of reduced velocities(3.0≤Ur≤13.0)and gap spacing(L=3D,4D,and 5D).The observed vibration response included several regimes:the desynchronization regime,the initial branch,and the lower branch.Notably,the transverse amplitude peaked,and a double vortex street formed in the wake when the reduced velocity reached the lower branch.This arrangement of three cylinders proved advantageous for energy capture as the upstream cylinder’s vibration response mirrored that of an isolated cylinder,while the response of each downstream cylinder was significantly enhanced.Compared to a single cylinder,the vibration and flow characteristics of this system are markedly more complex.The maximum transverse amplitudes of the downstream cylinders are nearly identical and exceed those observed in a single-cylinder set-up.Depending on the gap spacing,the flow pattern varied:it was in-phase for L=3D,antiphase for L=4D,and exhibited vortex shedding for L=5D.The wake configuration mainly featured double vortex streets for L=3D and evolved into two pairs of double vortex streets for L=5D.Consequently,it well illustrates the coupling mechanism that dynamics characteristics and wake vortex change with gap spacing and reduced velocities.展开更多
A deep-sea mining riser is a crucial component of the system used to lift seafloor mineral resources to the vessel.It is prone to damage and failure because of harsh environmental conditions and internal fluid erosion...A deep-sea mining riser is a crucial component of the system used to lift seafloor mineral resources to the vessel.It is prone to damage and failure because of harsh environmental conditions and internal fluid erosion.Furthermore,damage can impact the response characteristics of the riser,but varying environmental loadings easily mask it.Thus,distin-guishing between riser damage and environmental effects poses a considerable challenge.To address this issue,a cantilevered model is created for a deep-sea mining riser via the concentrated mass method,and a time-domain analytical strategy is developed.The vortex-induced vibration(VIV)response characteristics of the riser are initially examined,considering various damage conditions and flow velocities.The study results revealed four primary observations:(a)effective tension can serve as a reliable indicator for identifying damage at lower velocities;(b)there are noticeable differences in displacement between the healthy and damaged risers in the in-line direction rather than the cross-flow direction;(c)frequency characteristics can more effectively distinguish the damage conditions at high flow velocities,with the mean square frequency and frequency variance being more effective than the centroid frequency and root variance frequency;(d)displacement differences are more sensitive to damage occurring near the top and bottom of the riser,while both velocity variations and structural damage can influence displacements,especially in regions between modal nodes.The vibrational behavior and damage indicators are clarified for structural health monitoring of deep-sea mining risers during lifting operations.展开更多
To investigate the wind⁃induced vibration re⁃sponse characteristics of multispan double⁃layer cable photo⁃voltaic(PV)support structures,wind tunnel tests using an aeroelastic model were carried out to obtain the wind⁃...To investigate the wind⁃induced vibration re⁃sponse characteristics of multispan double⁃layer cable photo⁃voltaic(PV)support structures,wind tunnel tests using an aeroelastic model were carried out to obtain the wind⁃induced vibration response data of a three⁃span four⁃row double⁃layer cable PV support system.The wind⁃induced vibration characteristics with different PV module tilt angles,wind speeds,and wind direction angles were analyzed.The results showed that the double⁃layer cable large⁃span flexible PV support can effectively control the wind⁃induced vibration response and prevent the occur⁃rence of flutter under strong wind conditions.The maxi⁃mum value of the wind⁃induced vibration displacement of the flexible PV support system occurs in the windward first row.The upstream module has a significant shading effect on the downstream module,with a maximum effect of 23%.The most unfavorable wind direction angles of the structure are 0°and 180°.The change of the wind direction angle in the range of 0°to 30°has little effect on the wind vi⁃bration response.The change in the tilt angle of the PV modules has a greater impact on the wind vibration in the downwind direction and a smaller impact in the upwind di⁃rection.Special attention should be paid to the structural wind⁃resistant design of such systems in the upwind side span.展开更多
For the first time,the linear and nonlinear vibrations of composite rectangular sandwich plates with various geometric patterns of lattice core have been analytically examined in this work.The plate comprises a lattic...For the first time,the linear and nonlinear vibrations of composite rectangular sandwich plates with various geometric patterns of lattice core have been analytically examined in this work.The plate comprises a lattice core located in the middle and several homogeneous orthotropic layers that are symmetrical relative to it.For this purpose,the partial differential equations of motion have been derived based on the first-order shear deformation theory,employing Hamilton’s principle and Von Kármán’s nonlinear displacement-strain relations.Then,the nonlinear partial differential equations of the plate are converted into a time-dependent nonlinear ordinary differential equation(Duffing equation)by applying the Galerkin method.From the solution of this equation,the natural frequencies are extracted.Then,to calculate the non-linear frequencies of the plate,the non-linear equation of the plate has been solved analytically using the method of multiple scales.Finally,the effect of some critical parameters of the system,such as the thickness,height,and different angles of the stiffeners on the linear and nonlinear frequencies,has been analyzed in detail.To confirmthe solution method,the results of this research have been compared with the reported results in the literature and finite elements in ABAQUS,and a perfect match is observed.The results reveal that the geometry and configuration of core ribs strongly affect the natural frequencies of the plate.展开更多
Maintaining the integrity and longevity of structures is essential in many industries,such as aerospace,nuclear,and petroleum.To achieve the cost-effectiveness of large-scale systems in petroleum drilling,a strong emp...Maintaining the integrity and longevity of structures is essential in many industries,such as aerospace,nuclear,and petroleum.To achieve the cost-effectiveness of large-scale systems in petroleum drilling,a strong emphasis on structural durability and monitoring is required.This study focuses on the mechanical vibrations that occur in rotary drilling systems,which have a substantial impact on the structural integrity of drilling equipment.The study specifically investigates axial,torsional,and lateral vibrations,which might lead to negative consequences such as bit-bounce,chaotic whirling,and high-frequency stick-slip.These events not only hinder the efficiency of drilling but also lead to exhaustion and harm to the system’s components since they are difficult to be detected and controlled in real time.The study investigates the dynamic interactions of these vibrations,specifically in their high-frequency modes,usingfield data obtained from measurement while drilling.Thefindings have demonstrated the effect of strong coupling between the high-frequency modes of these vibrations on drilling sys-tem performance.The obtained results highlight the importance of considering the interconnected impacts of these vibrations when designing and implementing robust control systems.Therefore,integrating these compo-nents can increase the durability of drill bits and drill strings,as well as improve the ability to monitor and detect damage.Moreover,by exploiting thesefindings,the assessment of structural resilience in rotary drilling systems can be enhanced.Furthermore,the study demonstrates the capacity of structural health monitoring to improve the quality,dependability,and efficiency of rotary drilling systems in the petroleum industry.展开更多
Soft polymer optical fiber(SPOF)has shown great potential in optical-based wearable and implantable biosensors due to its excellent mechanical properties and optical guiding characteristics.However,the multimodality c...Soft polymer optical fiber(SPOF)has shown great potential in optical-based wearable and implantable biosensors due to its excellent mechanical properties and optical guiding characteristics.However,the multimodality characteristics of SPOF limit their integration with traditional fiber optic sensors.This article introduces for the first time a flexible fiber optic vibration sensor based on laser interference technology,which can be applied to vibration measurement under high stretch conditions.This sensor utilizes elastic optical fibers made of polydimethylsiloxane(PDMS)as sensing elements,combined with phase generating carrier technology,to achieve vibration measurement at 50−260 Hz within the stretch range of 0−42%.展开更多
It is particularly important to explore the response and transmission characteristics of shoe sole when exposed to foot-transmitted vibration(FTV)in daily life.In this study,based on mechanical mobility and vibration ...It is particularly important to explore the response and transmission characteristics of shoe sole when exposed to foot-transmitted vibration(FTV)in daily life.In this study,based on mechanical mobility and vibration transmissibility,the vibration response and transmission characteristics of ordinary sole and multi-cellular structure sole under three excitation modes were analyzed with finite element analysis.The analysis results of the ordinary sole are as follows:The distribution and transmission of vibration energy of ordinary sole are more related to the excitation position and mode-shape;the phalange region is more violent in vibration response to vibration and transmission of vibration.In addition,the analysis results of multi-cellular structure soles show that different types of multi-cellular structure soles have different effects on the equivalent mechanical mobility and the equivalent vibration transmissibility,among which Grid type has the greatest influence.So,this study can help prevent foot injury and provide guidance for the optimal design of the sole.展开更多
To broaden the frequency regulation range of piezoelectric motors,this paper proposes a piezoelectric vibrator that operates in multiple in-plane vibration modes with distinct resonance frequencies.The piezoelectric v...To broaden the frequency regulation range of piezoelectric motors,this paper proposes a piezoelectric vibrator that operates in multiple in-plane vibration modes with distinct resonance frequencies.The piezoelectric vibrator was constructed by reasonably arranging multiple groups of piezoelectric ceramic(PZT)sheets based on the most typical rectangular plate piezoelectric motors.Suitable working modes were selected,and the excitation method of these operating modes was also analyzed.Besides,interactions between selected operating modes were also investigated.The finite element software,ANSYS,was adopted to optimize the structural parameters of the vibrator through modal analysis to match the resonance frequencies of specific modes.After that,whether the selected operating modes can be successfully motivated was verified by harmonic response analysis.Finally,the vibration characteristics of piezoelectric vibrators under conventional vibration modes and multiple modes were acquired by transient analysis,respectively.Simulation results reveal that under dual-frequency excitation scheme 1,response displacements of the driving point are relatively larger.This strategy not only facilitates the excitation of B4 mode but also enables control over the ratio of horizontal to vertical displacements of the driving point.Additionally,incorporating B4 mode expands the frequency adjustment range of piezoelectric vibrators.展开更多
Piezoelectric active vibration control holds paramount importance in space structures.An embedded piezoelectric actuator with a sandwich configuration is proposed,which enhances control accuracy by integrating various...Piezoelectric active vibration control holds paramount importance in space structures.An embedded piezoelectric actuator with a sandwich configuration is proposed,which enhances control accuracy by integrating various components.Firstly,the electromechanical coupling characteristics of the actuator are revealed,and the model is established.Secondly,the equivalent model of a cylindrical cantilever beam is investigated as the object,and the feasibility of the vibration control of the actuator is verified by simulation.Finally,the prototype comprised of two actuators,which respectively use the proposed embedded actuators for producing the vibration and suppressing the vibration,is developed,and the measurement system is constructed.Experimental results demonstrate the excellent control efficiency in two orthogonal directions,achieving a minimum vibration amplitude control of 0.00102 mm and a maximum vibration control of-42.74 d B.The integrated structure offers fast response,lightness,adaptability,and high control efficiency,which is conducive to enhancing the vibration control.展开更多
基金National Natural Science Foundation of China under Grant Nos.52078386 and 52308496SINOMACH Youth Science and Technology Fund under Grant No.QNJJ-PY-2022-02+2 种基金Young Elite Scientists Sponsorship Program under Grant No.BYESS2023432Fund of State Key Laboratory of Precision Blasting and Hubei Key Laboratory of Blasting Engineering,Jianghan University under Grant No.PBSKL2023A9Fund of China Railway Construction Group Co.,Ltd.under Grant No.LX19-04b。
文摘Strong surface impact will produce strong vibration,which will pose a threat to the safety of nearby buried pipelines and other important lifeline projects.Based on the verified numerical method,a comprehensive numerical parameter analysis is conducted on the key influencing factors of the vibration isolation hole(VIH),which include hole diameter,hole net spacing,hole depth,hole number,hole arrangement,and soil parameters.The results indicate that a smaller ratio of net spacing to hole diameter,the deeper the hole,the multi-row hole,the hole adoption of staggered arrangements,and better site soil conditions can enhance the efficiency of the VIH barrier.The average maximum vibration reduction efficiency within the vibration isolation area can reach 42.2%.The vibration safety of adjacent oil pipelines during a dynamic compaction projection was evaluated according to existing standards,and the measurement of the VIH was recommended to reduce excessive vibration.The single-row vibration isolation scheme and three-row staggered arrangement with the same hole parameters are suggested according to different cases.The research findings can serve as a reference for the vibration safety analysis,assessment,and control of adjacent underground facilities under the influence of strong surface impact loads.
基金supported by the Shenzhen Stability Support Plan(Grant No.20231122095154003)National Natural Science Foundation of China(Grant Nos.51978671 and 52378425)Guizhou Provincial Department of Transportation Science and Technology Program(Grant No.2023-122-003)。
文摘Due to space constraints in mountainous areas,twin tunnels are sometimes constructed very close to each other or even overlap.This proximity challenges the structural stability of tunnels built with the drill-and-blast method,as the short propagation distance amplifies blasting vibrations.A case of blasting damage is reported in this paper,where concrete cracks crossed construction joints in the twin-arch lining.To identify the causes of these cracks and develop effective vibration mitigation measures,field monitoring and numerical analysis were conducted.Specifically,a restart method was used to simulate the second peak particle velocity(PPV)of MS3 delays occurring 50 ms after the MS1 delays.The study found that the dynamic tensile stress in the tunnel induced by the blast wave has a linear relationship with the of the product of the concrete wave impedance and the PPV.A blast vibration velocity exceeding 23.3 cm/s resulted in tensile stress in the lining surpassing the ultimate tensile strength of C30 concrete,leading to tensile cracking on the blast-facing arch of the constructed tunnel.To control excessive vi-bration velocity,a mitigation trench was implemented to reduce blast wave impact.The trench,approximately 15 m in length,50 cm in width,and 450 cm in height,effectively lowered vibration ve-locities,achieving an average reduction rate of 52%according to numerical analysis.A key innovation of this study is the on-site implementation and validation of the trench's effectiveness in mitigating vi-brations.A feasible trench construction configuration was proposed to overcome the limitations of a single trench in fully controlling vibrations.To further enhance protection,zoned blasting and an auxiliary rock pillar,80 cm in width,were incorporated to reinforce the mid-wall.This study introduces novel strategies for vibration protection in tunnel blasting,offering innovative solutions to address blasting-induced vibrations and effectively minimize their impact,thereby enhancing safety and struc-tural stability.
基金supported by the National Natural Science Foundation of China(Grant No.52035005)the Key R&D Program of Shandong Province in China(Grant No.2021ZLGX01).
文摘The composite structures/components made by friction stir lap welding(FSLW)of Mg alloy sheet and Al alloy sheet are of wide application potentials in the manufacturing sector of transportation vehicles.To further improve the joint quality,the ultrasonic vibration(UV)is exerted in FSLW,and the UV enhanced FSLW(UVeFSLW)was developed for making Mg-to-Al dissimilar joints.The numerical analysis and experimental investigation were combined to study the process mechanism in Mg/Al UVeFSLW.An equation related to the temperature and strain rate was derived to calculate the grain size at different locations of the weld nugget zone,and the effect of grain size distribution on the threshold thermal stress was included,so that the prediction accuracy of flow stress was further improved.With such modified constitutive equation,the numerical simulation was conducted to compare the heat generation,temperature profiles and material flow behaviors in Mg/Al UVeFSLW/FSLW processes.It was found that the exerted UV decreased the temperature at two checking points on the tool/workpiece interface from 707/671 K in FSLW to 689/660 K in UVeFSLW,which suppressed the IMCs thickness at Mg-Al interface from 1.7μm in FSLW to 1.1μm in UVeFSLW.The exerted UV increased the horizontal materials flow ability,and decreased the upward flow ability,which resulted in the increase of effective sheet thickness/effective lap width from 2.01/3.70 mm in FSLW to 2.04/4.84 mm in UVeFSLW.Therefore,the ultrasonic vibration improved the tensile shear strength of Mg-to-Al lap joints by 18%.
基金co-supported by the Science Center for Gas Turbine Project, China(No. P2022-AB-IV-001-002)the National Natural Science Foundation of China (No. 91960203)+1 种基金the Fundamental Research Funds for the Central Universities (No. D5000230048)the Innovation Capability Support Program of Shaanxi (No. 2022TD-60)
文摘Superior strength and high-temperature performance make γ-TiAl vital for lightweight aero-engines. However, its inherent brittleness poses machining problems. This study employed Elliptical Ultrasonic Vibration Milling (EUVM) to address these problems. Considering the influence of machining parameters on vibration patterns of EUVM, a separation time model was established to analyze the vibration evolutionary process, thereby instructing the cutting mechanism. On this basis, deep discussions regarding chip formation, cutting force, edge breakage, and subsurface layer deformation were conducted for EUVM and Conventional Milling (CM). Chip morphology showed the chip formation was rooted in the periodic brittle fracture. Local dimples proved that the thermal effect of high-speed cutting improved the plasticity of γ-TiAl. EUVM achieved a maximum 18.17% reduction in cutting force compared with CM. The force variation mechanism differed with changes in the cutting speed or the vibration amplitude, and its correlation with thermal softening, strain hardening, and vibratory cutting effects was analyzed. EUVM attained desirable edge breakage by achieving smaller fracture lengths. The fracture mechanisms of different phases were distinct, causing a surge in edge fracture size of γ-TiAl under microstructural differences. In terms of subsurface deformation, EUVM also showed strengthening effects. Noteworthy, the lamellar deformation patterns under the cutting removal state differed from the quasi-static, which was categorized by the orientation angles. Additionally, the electron backscattering diffraction provided details of the influence of microstructural difference on the orientation and the deformation of grains in the subsurface layer. The results demonstrate that EUVM is a promising machining method for γ-TiAl and guide further research and development of EUVM γ-TiAl.
基金National Natural Science Foundation of China under Grant No.51578463。
文摘The vibration response and noise caused by subway trains can affect the safety and comfort of superstructures.To study the dynamic response characteristics of subway stations and superstructures under train loads with a hard combination,a numerical model is developed in this study.The indoor model test verified the accuracy of the numerical model.The influence laws of different hard combinations,train operating speeds and modes were studied and evaluated accordingly.The results show that the frequency corresponding to the peak vibration acceleration level of each floor of the superstructure property is concentrated at 10–20 Hz.The vibration response decreases in the high-frequency parts and increases in the lowfrequency parts with increasing distance from the source.Furthermore,the factors,such as train operating speed,operating mode,and hard combination type,will affect the vibration of the superstructure.The vibration response under the reversible operation of the train is greater than that of the unidirectional operation.The operating speed of the train is proportional to its vibration response.The vibration amplification area appears between the middle and the top of the superstructure at a higher train speed.Its vibration acceleration level will exceed the limit value of relevant regulations,and vibration-damping measures are required.Within the scope of application,this study provides some suggestions for constructing subway stations and superstructures.
基金Supported by the National Natural Science Foundation of China (Grant No. 52222111)the National Science and Technology Major Project of China “Key Technologies and Equipment for Deepwater Dry Oil and Gas Production and Processing Platforms”(No. 2024ZD1403300)+1 种基金Subproject 5 “Research on Safety Risk Assessment Technology System for Deepwater Dry Oil and Gas Production and Processing Platforms”(No. 2024ZD1403305)the China Scholarship Council (202306440019)。
文摘A numerical simulation analysis is conducted to examine the unsteady hydrodynamic characteristics of vortex-induced vibration(VIV)and the suppression effect of helical strakes on VIV in subsea pipelines.The analysis uses the standard k−εturbulence model for 4.5-and 12.75-inch pipes,and its accuracy is verified by comparing the results with large-scale hydrodynamic experiments.These experiments are designed to evaluate the suppression efficiency of VIV with and without helical strakes,focusing on displacement and drag coefficients under different flow conditions.Furthermore,the influence of important geometric parameters of the helical strakes on drag coefficients and VIV suppression efficiency at different flow rates is compared and discussed.Numerical results agree well with experimental data for drag coefficient and vortex shedding frequency.Spring-pipe self-excited vibration experimental tests reveal that the installation of helical strakes substantially reduces the drag coefficient of VIV within a certain flow rate range,achieving suppression efficiencies exceeding 90%with strake heights larger than 0.15D.Notably,the optimized parameter combination of helical strakes,with a pitch of 15D,a fin height of 0.2D,and 45°edge slopes,maintains high suppression efficiency,thereby exhibiting superior performance.This study provides a valuable reference for the design and application of helical strakes and VIV suppression in subsea engineering.
基金financially supported by the National Natural Science Foundation of China(Grant No.52301338)the Sichuan Science and Technology Program(Grant No.2024NSFSC0968).
文摘An experimental analysis of the slug-induced vibration(SIV)of a flexible catenary riser with an aspect ratio of 130 is reported in this work.The vibration responses and internal slug flow details at different gas-liquid ratios(Q_(g)/Q_(l))and mixture velocities(vm)are non-intrusively and simultaneously captured by high-speed cameras.Both the in-plane and out-of-plane responses of the catenary riser are excited in all considered cases.The slug flow characteristics,including translational velocities,slug lengths,recurrence frequencies,and pressure variations,are analyzed and dis-cussed,as are the dynamic responses of the riser in terms of the amplitudes,space-varying frequency,and modal weight.The dominant modal response based on the root-mean-square amplitude profiles does not match that based on the dominant frequency.Three mode switching types are identified based on the RMS amplitude profiles and the dominant frequency.When vm is small,no mode switching(NMS)is observed in either the in-plane or out-of-plane responses.For mode switching I(MS I),the switching between the first and second modes in the in-plane response is induced by slug flow with different recurrence frequencies in cases of large Q_(g)/Q_(l).However,there is no mode switching in the out-of-plane response.The switching between the first and third modes for the in-plane response and the second and fourth modes for the out-of-plane response(MS II)occurs in cases of relatively high vm and low Q_(g)/Q_(l).
基金supported by Sichuan Science and Technology Program(Grant No.2020YFH0080)the National Natural Science Foundation of China(Grant No.51475386)the National Basic Research Project of China(973 Program,Grant No.2015CB654801).
文摘The gear transmission system directly affects the operational performance of high-speed trains(HST).However,current research on gear transmission systems of HST often overlooks the effects of gear eccentricity and running resistance,and the dynamic models of gear transmission system are not sufficiently comprehensive.This paper aims to establish an electromechanical coupling dynamic model of HST traction transmission system and study its electromechanical coupling vibration characteristics,in which the internal excitation factors such as gear eccentricity,time-varying meshing stiffness,backlash,meshing error,and external excitation factors such as electromagnetic torque and running resistance are stressed.The research results indicate that gear eccentricity and running resistance have a significant impact on the stability of the system,and gear eccentricity leads to intensified system vibration and decreased anti-interference ability.In addition,the characteristic frequency of gear eccentricity can be extracted from mechanical signals and current signals as a preliminary basis for eccentricity detection,and electrical signals can also be used to monitor changes in train running resistance in real time.The results of this study provide some useful insights into designing dynamic performance parameters for HST transmission systems and monitoring train operational states.
基金financially supported by the National Natural Science Foundation of China(No.22272151)Public Welfare Technology Application Research Project of Jinhua City,China(No.2023-4-022)。
文摘BiVO_(4)porous spheres modified by ZnO were designed and synthesized using a facile two-step method.The resulting ZnO/BiVO_(4)composite catalysts have shown remarkable efficiency as piezoelectric catalysts for degrading Rhodamine B(RhB)unde mechanical vibrations,they exhibit superior activity compared to pure ZnO.The 40wt%ZnO/BiVO_(4)heterojunction composite displayed the highest activity,along with good stability and recyclability.The enhanced piezoelectric catalytic activity can be attributed to the form ation of an I-scheme heterojunction structure,which can effectively inhibit the electron-hole recombination.Furthermore,hole(h+)and superoxide radical(·O_(2)^(-))are proved to be the primary active species.Therefore,ZnO/BiVO_(4)stands as an efficient and stable piezoelectric catalyst with broad potential application in the field of environmental water pollution treatment.
基金supported by the Major Science and Technology Project of Zhongshan City(No.2022AJ004)the Key Basic and Applied Research Program of Guangdong Province(Nos.2019B030302010 and 2022B1515120082)Guangdong Science and Technology Innovation Project(No.2021TX06C111).
文摘In general,the rapid growth of α-Fe clusters is a challenge in high Fe-content Fe-based amorphous alloys,negatively affecting their physical properties.Herein,we introduce an efficient and rapid post-treatment technique known as ultrasonic vibration rapid processing(UVRP),which enables the formation of high-density strong magnetic α-Fe clusters,thereby enhancing the soft magnetic properties of Fe_(78)Si(13)B_(9) amorphous alloy ribbon.
基金financially supported by Sichuan Science and Technology Program(Grant No.2023NSFSC1980).
文摘This study examines the adaptive boundary control problem of flexible marine riser with internal flow coupling.The dynamic model of the flexible marine riser system with internal flow coupling is derived using the Hamiltonian principle.An analysis of internal flow’s influence on the vibration characteristics of flexible marine risers is conducted.Then,for the uncertain environmental disturbance,the adaptive fuzzy logic system is introduced to dynamically approximate the boundary disturbance,and a robust adaptive fuzzy boundary control is proposed.The uniform boundedness of the closed-loop system is proved based on Lyapunov theory.The well-posedness of the closed-loop system is proved by operator semigroup theory.The proposed control’s effectiveness is validated through comparison with existing control methods.
基金Supported by the National Natural Science Foundation of China(52201350,52201394,and 52271301)the Innovation Group Project of Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)(Grant No.SML2022008).
文摘To explore the relationship between dynamic characteristics and wake patterns,numerical simulations were conducted on three equal-diameter cylinders arranged in an equilateral triangle.The simulations varied reduced velocities and gap spacing to observe flow-induced vibrations(FIVs).The immersed boundary–lattice Boltzmann flux solver(IB–LBFS)was applied as a numerical solution method,allowing for straightforward application on a simple Cartesian mesh.The accuracy and rationality of this method have been verified through comparisons with previous numerical results,including studies on flow past three stationary circular cylinders arranged in a similar pattern and vortex-induced vibrations of a single cylinder across different reduced velocities.When examining the FIVs of three cylinders,numerical simulations were carried out across a range of reduced velocities(3.0≤Ur≤13.0)and gap spacing(L=3D,4D,and 5D).The observed vibration response included several regimes:the desynchronization regime,the initial branch,and the lower branch.Notably,the transverse amplitude peaked,and a double vortex street formed in the wake when the reduced velocity reached the lower branch.This arrangement of three cylinders proved advantageous for energy capture as the upstream cylinder’s vibration response mirrored that of an isolated cylinder,while the response of each downstream cylinder was significantly enhanced.Compared to a single cylinder,the vibration and flow characteristics of this system are markedly more complex.The maximum transverse amplitudes of the downstream cylinders are nearly identical and exceed those observed in a single-cylinder set-up.Depending on the gap spacing,the flow pattern varied:it was in-phase for L=3D,antiphase for L=4D,and exhibited vortex shedding for L=5D.The wake configuration mainly featured double vortex streets for L=3D and evolved into two pairs of double vortex streets for L=5D.Consequently,it well illustrates the coupling mechanism that dynamics characteristics and wake vortex change with gap spacing and reduced velocities.
基金financially supported by the National Key Research and Development Program of China(Grant No.2023YFC2811600)the National Natural Science Foundation of China(Grant Nos.52301349 and 52088102)+1 种基金the Qingdao Post-Doctorate Science Fund(No.QDBSH20220202070)the Major Scientific and Technological Innovation Project of Shandong Province(Grant No.2019JZZY010820).
文摘A deep-sea mining riser is a crucial component of the system used to lift seafloor mineral resources to the vessel.It is prone to damage and failure because of harsh environmental conditions and internal fluid erosion.Furthermore,damage can impact the response characteristics of the riser,but varying environmental loadings easily mask it.Thus,distin-guishing between riser damage and environmental effects poses a considerable challenge.To address this issue,a cantilevered model is created for a deep-sea mining riser via the concentrated mass method,and a time-domain analytical strategy is developed.The vortex-induced vibration(VIV)response characteristics of the riser are initially examined,considering various damage conditions and flow velocities.The study results revealed four primary observations:(a)effective tension can serve as a reliable indicator for identifying damage at lower velocities;(b)there are noticeable differences in displacement between the healthy and damaged risers in the in-line direction rather than the cross-flow direction;(c)frequency characteristics can more effectively distinguish the damage conditions at high flow velocities,with the mean square frequency and frequency variance being more effective than the centroid frequency and root variance frequency;(d)displacement differences are more sensitive to damage occurring near the top and bottom of the riser,while both velocity variations and structural damage can influence displacements,especially in regions between modal nodes.The vibrational behavior and damage indicators are clarified for structural health monitoring of deep-sea mining risers during lifting operations.
基金The National Natural Science Foundation of China(No.52338011).
文摘To investigate the wind⁃induced vibration re⁃sponse characteristics of multispan double⁃layer cable photo⁃voltaic(PV)support structures,wind tunnel tests using an aeroelastic model were carried out to obtain the wind⁃induced vibration response data of a three⁃span four⁃row double⁃layer cable PV support system.The wind⁃induced vibration characteristics with different PV module tilt angles,wind speeds,and wind direction angles were analyzed.The results showed that the double⁃layer cable large⁃span flexible PV support can effectively control the wind⁃induced vibration response and prevent the occur⁃rence of flutter under strong wind conditions.The maxi⁃mum value of the wind⁃induced vibration displacement of the flexible PV support system occurs in the windward first row.The upstream module has a significant shading effect on the downstream module,with a maximum effect of 23%.The most unfavorable wind direction angles of the structure are 0°and 180°.The change of the wind direction angle in the range of 0°to 30°has little effect on the wind vi⁃bration response.The change in the tilt angle of the PV modules has a greater impact on the wind vibration in the downwind direction and a smaller impact in the upwind di⁃rection.Special attention should be paid to the structural wind⁃resistant design of such systems in the upwind side span.
文摘For the first time,the linear and nonlinear vibrations of composite rectangular sandwich plates with various geometric patterns of lattice core have been analytically examined in this work.The plate comprises a lattice core located in the middle and several homogeneous orthotropic layers that are symmetrical relative to it.For this purpose,the partial differential equations of motion have been derived based on the first-order shear deformation theory,employing Hamilton’s principle and Von Kármán’s nonlinear displacement-strain relations.Then,the nonlinear partial differential equations of the plate are converted into a time-dependent nonlinear ordinary differential equation(Duffing equation)by applying the Galerkin method.From the solution of this equation,the natural frequencies are extracted.Then,to calculate the non-linear frequencies of the plate,the non-linear equation of the plate has been solved analytically using the method of multiple scales.Finally,the effect of some critical parameters of the system,such as the thickness,height,and different angles of the stiffeners on the linear and nonlinear frequencies,has been analyzed in detail.To confirmthe solution method,the results of this research have been compared with the reported results in the literature and finite elements in ABAQUS,and a perfect match is observed.The results reveal that the geometry and configuration of core ribs strongly affect the natural frequencies of the plate.
文摘Maintaining the integrity and longevity of structures is essential in many industries,such as aerospace,nuclear,and petroleum.To achieve the cost-effectiveness of large-scale systems in petroleum drilling,a strong emphasis on structural durability and monitoring is required.This study focuses on the mechanical vibrations that occur in rotary drilling systems,which have a substantial impact on the structural integrity of drilling equipment.The study specifically investigates axial,torsional,and lateral vibrations,which might lead to negative consequences such as bit-bounce,chaotic whirling,and high-frequency stick-slip.These events not only hinder the efficiency of drilling but also lead to exhaustion and harm to the system’s components since they are difficult to be detected and controlled in real time.The study investigates the dynamic interactions of these vibrations,specifically in their high-frequency modes,usingfield data obtained from measurement while drilling.Thefindings have demonstrated the effect of strong coupling between the high-frequency modes of these vibrations on drilling sys-tem performance.The obtained results highlight the importance of considering the interconnected impacts of these vibrations when designing and implementing robust control systems.Therefore,integrating these compo-nents can increase the durability of drill bits and drill strings,as well as improve the ability to monitor and detect damage.Moreover,by exploiting thesefindings,the assessment of structural resilience in rotary drilling systems can be enhanced.Furthermore,the study demonstrates the capacity of structural health monitoring to improve the quality,dependability,and efficiency of rotary drilling systems in the petroleum industry.
文摘Soft polymer optical fiber(SPOF)has shown great potential in optical-based wearable and implantable biosensors due to its excellent mechanical properties and optical guiding characteristics.However,the multimodality characteristics of SPOF limit their integration with traditional fiber optic sensors.This article introduces for the first time a flexible fiber optic vibration sensor based on laser interference technology,which can be applied to vibration measurement under high stretch conditions.This sensor utilizes elastic optical fibers made of polydimethylsiloxane(PDMS)as sensing elements,combined with phase generating carrier technology,to achieve vibration measurement at 50−260 Hz within the stretch range of 0−42%.
基金the National Natural Science Foundation of China(No.52175230)Natural Science Foundation of Fujian Province(Nos.2021J01297,2020J011234 and 2020J011227)+3 种基金Technology Program Pilot Project of Fujian Province(No.2020H0015)Xiamen Medical and Health Guidance Project(No.3502720199009)Research Start-Up Fund Project of Huaqiao University(No.11BS412)Subsidized Project for Postgraduates’Innovation Fund in Scientific Research of Huaqiao University(Nos.19013080038 and 20014080038)。
文摘It is particularly important to explore the response and transmission characteristics of shoe sole when exposed to foot-transmitted vibration(FTV)in daily life.In this study,based on mechanical mobility and vibration transmissibility,the vibration response and transmission characteristics of ordinary sole and multi-cellular structure sole under three excitation modes were analyzed with finite element analysis.The analysis results of the ordinary sole are as follows:The distribution and transmission of vibration energy of ordinary sole are more related to the excitation position and mode-shape;the phalange region is more violent in vibration response to vibration and transmission of vibration.In addition,the analysis results of multi-cellular structure soles show that different types of multi-cellular structure soles have different effects on the equivalent mechanical mobility and the equivalent vibration transmissibility,among which Grid type has the greatest influence.So,this study can help prevent foot injury and provide guidance for the optimal design of the sole.
基金funded by National Natural Science Foundation of China,grant number 52205292.
文摘To broaden the frequency regulation range of piezoelectric motors,this paper proposes a piezoelectric vibrator that operates in multiple in-plane vibration modes with distinct resonance frequencies.The piezoelectric vibrator was constructed by reasonably arranging multiple groups of piezoelectric ceramic(PZT)sheets based on the most typical rectangular plate piezoelectric motors.Suitable working modes were selected,and the excitation method of these operating modes was also analyzed.Besides,interactions between selected operating modes were also investigated.The finite element software,ANSYS,was adopted to optimize the structural parameters of the vibrator through modal analysis to match the resonance frequencies of specific modes.After that,whether the selected operating modes can be successfully motivated was verified by harmonic response analysis.Finally,the vibration characteristics of piezoelectric vibrators under conventional vibration modes and multiple modes were acquired by transient analysis,respectively.Simulation results reveal that under dual-frequency excitation scheme 1,response displacements of the driving point are relatively larger.This strategy not only facilitates the excitation of B4 mode but also enables control over the ratio of horizontal to vertical displacements of the driving point.Additionally,incorporating B4 mode expands the frequency adjustment range of piezoelectric vibrators.
基金supported by the National Natural Science Foundation of China(Nos.52275022,52175015 and U2037603)the Natural Science Foundation of Jiangsu Province,China(Nos.BK20222011 and BK20230093)the State Key Laboratory of Mechanics and Control for Aerospace Structures,China(No.MCAS-S-0223G01)。
文摘Piezoelectric active vibration control holds paramount importance in space structures.An embedded piezoelectric actuator with a sandwich configuration is proposed,which enhances control accuracy by integrating various components.Firstly,the electromechanical coupling characteristics of the actuator are revealed,and the model is established.Secondly,the equivalent model of a cylindrical cantilever beam is investigated as the object,and the feasibility of the vibration control of the actuator is verified by simulation.Finally,the prototype comprised of two actuators,which respectively use the proposed embedded actuators for producing the vibration and suppressing the vibration,is developed,and the measurement system is constructed.Experimental results demonstrate the excellent control efficiency in two orthogonal directions,achieving a minimum vibration amplitude control of 0.00102 mm and a maximum vibration control of-42.74 d B.The integrated structure offers fast response,lightness,adaptability,and high control efficiency,which is conducive to enhancing the vibration control.
