The April 20, 2013, Ms7.0 Lushan earthquake was successfully recorded by closely spaced Continuous Global Positioning System （CGPS） stations owned by the Crustal Movement Observation Network of Chi- na （CMONC）. Th...The April 20, 2013, Ms7.0 Lushan earthquake was successfully recorded by closely spaced Continuous Global Positioning System （CGPS） stations owned by the Crustal Movement Observation Network of Chi- na （CMONC）. The 1-Hz GNSS data from eight CGPS stations, which are located between 30 km and 200 km from the hypocenter, were processed within quasi-real-time. The near-field surface deformation indicated the following characteristics ： the near-field movements were limited to several centimeters ; the peak of the deformation wave was significantly larger than the static permanent offset; at the beginning of the event, the north wall of the fault moved to the southeast as the south wall moved to the southwest ; station SCTQ, which was the closest station to the hypocenter at 30 km, had the largest static permanent displacement of 2 cm; the peaks of the deformation waves were 1.5 cm, 5 cm and 3 cm, to the east, the south and vertically upward, respectively ; and the peaks of velocity and acceleration, derived from the deformation, were 3.4 cm/s and 5.3 cm/s^2,respectively.展开更多
Jiuzhaigou is a world-heritage site located in the plateau area of Northwest Sichuan Province,China.Serious slope failures in the epicentral area were triggered by the Ms7.0 Jiuzhaigou earthquake occurred on August 8,...Jiuzhaigou is a world-heritage site located in the plateau area of Northwest Sichuan Province,China.Serious slope failures in the epicentral area were triggered by the Ms7.0 Jiuzhaigou earthquake occurred on August 8,2017.The source areas of the hazards are usually concentrated near ridge crests,revealingthe possible occurrence of ground motion amplification phenomena.To explore the role of the amplification of ground motions in the formation of earthquake-triggered slope failures,two seismometers were installed,on the next day after the main shock,at the bottom of the slopeof Jubao Mountain near the seismogenic fault.The two monitoring sites are located at elevations of 1414 m(J1)and 1551 m(J2,the top of the mountain).Five aftershocks were recorded by the monitoring instruments.We compared the mean levels of the peak ground acceleration(PGA)observed at different locations,and investigated the directional variations inthe shaking energy by analyzing the polar diagrams of the Arias intensity(Ia).Then,in order to identify the directional resonance phenomenonandtheir frequencies and amplification coefficients,we examined the horizontal-to-vertical spectral ratio(HVSR)and the standard spectral ratio(SSR).Polar diagrams of theArias intensity(Ia)indicated that the site response of Jubao Mountain showed a pronounced directivity(in theEW direction)with shaking maxima near the hill top oriented orthogonally to the elongation of the relief.We observed anobvious resonance phenomenonat site J2 at relatively low frequencies(2.5-9 Hz)and very weak spectral amplifications at site J1 at high frequencies(5-15 Hz),which suggested that the predominant frequency of monitoring site J2 was obviously attenuated and that the difference in the spectra was related to the influences of the local-scale site conditions of the whole mountain.The results of spectral ratio analyses(HVSR and SSR)showed that the direction of resonance was concentrated around an EW orientation,and the amplification factors near the hill top were larger than 2.It suggests that geologic factors also play a significant role in the anisotropic amplifications affecting the tops of slopes besides the topographic effects.展开更多
A rapid and accurate assessment of the stability of surveying and mapping reference points is important for post - disaster rescue, disaster relief and reconstruction activities. Using Precise Point Positioning （PPP...A rapid and accurate assessment of the stability of surveying and mapping reference points is important for post - disaster rescue, disaster relief and reconstruction activities. Using Precise Point Positioning （PPP） technology, a rapid assessment of the stability of the IGS sites in China was performed after the Ms7.0 Lushan earthquake using rapid precise ephemeris and rapid precise satellite clock products. The results show that the earthquake had a very small impact and did not cause significant permanent deformation at the IGS sites. Most of the sites were unaffected and remained stable after the earthquake.展开更多
After the occurrence of an earthquake,strong motion observation networks can record ground motion at distributed observation stations. Based on the ground motion parameters from these records,the spatial distribution ...After the occurrence of an earthquake,strong motion observation networks can record ground motion at distributed observation stations. Based on the ground motion parameters from these records,the spatial distribution of seismic intensity can be quickly determined,and the degree of damage in different areas can be estimated. This information provides the technical basis for the emergency response,so as to ensure that rescue teams can reach extreme earthquake areas and carry out the search and rescue operation in an accurate and timely manner to reduce casualties and property loss. In this paper,we introduced 7 intensity algorithms and compared the results with the records of the Jiuzhaigou M_S7. 0 earthquake. We found that the differences between the instrumental intensities calculated by each method and the macro intensities were within a 1-degree range,which suggested good practicality of these different methods. The results calculated by the industrial standards-based calculation method and the integrated test showed good consistency.展开更多
By using the integral dynamic adjustment of the "segmentation rate," this paper processes the leveling repetition measurement data of the Dianxi(western Yunnan)area since the 1980s,makes the fitting of the v...By using the integral dynamic adjustment of the "segmentation rate," this paper processes the leveling repetition measurement data of the Dianxi(western Yunnan)area since the 1980s,makes the fitting of the velocity surface for vertical deformation with multi-surface function,and splits information of the vertical deformation field.The dynamic evolution of the deformation field and vertical deformation information norm-shear deformation,extension deformation,volumetric deformation,and quasi acceleration,which are the distribution characteristics of variation,are studied by using the information split before the Lijiang earthquake with MS7.0(February 3,1996)in the north of the Dianxi(western Yunnan)leveling network.The results indicate that in Dianxi(western Yunnan)area,the acute vertical differential movement of the large-scale deformation velocity high gradient belt and high information norm distribution in the Lijiang,Yongsheng,and its adjacent areas in the middle stage of the 1980s is the reflection展开更多
In this paper, variations of shear wave splitting in the 2013 Lushan Ms7.0 earthquake sequence were studied. By analyzing shear wave particle motion of local events in the shear wave window, the fast polarization dire...In this paper, variations of shear wave splitting in the 2013 Lushan Ms7.0 earthquake sequence were studied. By analyzing shear wave particle motion of local events in the shear wave window, the fast polarization directions and the delay time between fast and slow shear waves were derived from seismic recordings at eight stations on the southern segment of the Longmenshan fault zone. In the study region, the fast polarization directions show partition characteristics from south to north. And the systematic changes of the time delays between two split shear waves were also observed. As for spatial distribution, the NE fast polarization directions are consistent with the Longmenshan fault strike in the south of focal region, whereas the NW fast direction is parallel to the direction of regional principal compressive stress in the north of focal region. Stations BAX and TQU are respectively located on the Central and Front-range faults, and because of the direct influence of these faults, the fast directions at both stations show particularity. In time domain, after the main shock, the delay times at stations increased rapidly, and decreased after a period of time. Shear-wave splitting was caused mostly by stress-aligned microcracks in rock below the stations. The results demonstrate changes of local stress field during the main shock and the aftershocks. The stress on the Lushan Ms7.0 earthquake region increased after the main shock, with the stress release caused by the aftershocks and the stress reduced in the late stage.展开更多
A continuous GPS array across the southern segment of the Longmenshan fault zone recorded the deformation during the process of the Lushan MS7.0 earthquake that occurred on April 20, 2013. Such data can provide meanin...A continuous GPS array across the southern segment of the Longmenshan fault zone recorded the deformation during the process of the Lushan MS7.0 earthquake that occurred on April 20, 2013. Such data can provide meaningful information regarding the dynamic evolution of crustal deformation in the seismogenic zone. Our studies have shown that the occurrence of the Wenchuan earthquake led to the loading of compressive and sinistral shearing strain on the southern segment of the Maoxian-Wenchuan fault, whereby the extrusion strain accumulated at a greater rate than before the Wenchuan earthquake. The strain time series in the seismogenic zone revealed that the principal compression strain rates decreased from west to east in the direction of N30°–45°W. Furthermore, the area to the east of Beichuan-Yingxiu fault behaved as a zone of compressive deformation with obvious sinistral shearing deformation. The surface strain and the first shearing strain time series decreased with time, while the area to the west of the Beichuan-Yingxiu fault behaved as a zone of dextral shear deformation that increased with time. Furthermore, the regional deformation field before the Lushan earthquake showed that the rate of extrusion strain accumulation in the southern segment of the Longmenshan fault zone was obviously larger than before the Wenchuan earthquake. Moreover, the sinistral shearing strain accumulated in the area of the southern segment of the Maoxian-Wenchuan fault. Based on the above analysis, we consider that the eastward movement of the Bayan Har block increased considerably following the Wenchuan earthquake, which enhanced the accumulation of compression strain in the southern segment of the Longmenshan fault zone.展开更多
基金supported by the National Natural Science Foundation of China(41274027)the Director Foundation of Institute of Seismology, China Earthquake Administration(IS201156063)
文摘The April 20, 2013, Ms7.0 Lushan earthquake was successfully recorded by closely spaced Continuous Global Positioning System （CGPS） stations owned by the Crustal Movement Observation Network of Chi- na （CMONC）. The 1-Hz GNSS data from eight CGPS stations, which are located between 30 km and 200 km from the hypocenter, were processed within quasi-real-time. The near-field surface deformation indicated the following characteristics ： the near-field movements were limited to several centimeters ; the peak of the deformation wave was significantly larger than the static permanent offset; at the beginning of the event, the north wall of the fault moved to the southeast as the south wall moved to the southwest ; station SCTQ, which was the closest station to the hypocenter at 30 km, had the largest static permanent displacement of 2 cm; the peaks of the deformation waves were 1.5 cm, 5 cm and 3 cm, to the east, the south and vertically upward, respectively ; and the peaks of velocity and acceleration, derived from the deformation, were 3.4 cm/s and 5.3 cm/s^2,respectively.
基金financially supported by the National Natural Science Foundation of China(Grand Nos.41877235,1704243)the Funds for Creative Research Groups of China(Grant No.41521002)the Independent Fund of State Key Laboratory of Geohazard Prevention and Geoenvironment Protection(Grant No.SKLGP2015Z001)
文摘Jiuzhaigou is a world-heritage site located in the plateau area of Northwest Sichuan Province,China.Serious slope failures in the epicentral area were triggered by the Ms7.0 Jiuzhaigou earthquake occurred on August 8,2017.The source areas of the hazards are usually concentrated near ridge crests,revealingthe possible occurrence of ground motion amplification phenomena.To explore the role of the amplification of ground motions in the formation of earthquake-triggered slope failures,two seismometers were installed,on the next day after the main shock,at the bottom of the slopeof Jubao Mountain near the seismogenic fault.The two monitoring sites are located at elevations of 1414 m(J1)and 1551 m(J2,the top of the mountain).Five aftershocks were recorded by the monitoring instruments.We compared the mean levels of the peak ground acceleration(PGA)observed at different locations,and investigated the directional variations inthe shaking energy by analyzing the polar diagrams of the Arias intensity(Ia).Then,in order to identify the directional resonance phenomenonandtheir frequencies and amplification coefficients,we examined the horizontal-to-vertical spectral ratio(HVSR)and the standard spectral ratio(SSR).Polar diagrams of theArias intensity(Ia)indicated that the site response of Jubao Mountain showed a pronounced directivity(in theEW direction)with shaking maxima near the hill top oriented orthogonally to the elongation of the relief.We observed anobvious resonance phenomenonat site J2 at relatively low frequencies(2.5-9 Hz)and very weak spectral amplifications at site J1 at high frequencies(5-15 Hz),which suggested that the predominant frequency of monitoring site J2 was obviously attenuated and that the difference in the spectra was related to the influences of the local-scale site conditions of the whole mountain.The results of spectral ratio analyses(HVSR and SSR)showed that the direction of resonance was concentrated around an EW orientation,and the amplification factors near the hill top were larger than 2.It suggests that geologic factors also play a significant role in the anisotropic amplifications affecting the tops of slopes besides the topographic effects.
文摘A rapid and accurate assessment of the stability of surveying and mapping reference points is important for post - disaster rescue, disaster relief and reconstruction activities. Using Precise Point Positioning （PPP） technology, a rapid assessment of the stability of the IGS sites in China was performed after the Ms7.0 Lushan earthquake using rapid precise ephemeris and rapid precise satellite clock products. The results show that the earthquake had a very small impact and did not cause significant permanent deformation at the IGS sites. Most of the sites were unaffected and remained stable after the earthquake.
基金sponsored by the State Key Research and Development Program of China(2016YFC1402800)the Basic R&D Fund for Central Level Public Service Research Institute,China(DQJB17T01)the National Natural Foundation of China(U1434210,51421005)
文摘After the occurrence of an earthquake,strong motion observation networks can record ground motion at distributed observation stations. Based on the ground motion parameters from these records,the spatial distribution of seismic intensity can be quickly determined,and the degree of damage in different areas can be estimated. This information provides the technical basis for the emergency response,so as to ensure that rescue teams can reach extreme earthquake areas and carry out the search and rescue operation in an accurate and timely manner to reduce casualties and property loss. In this paper,we introduced 7 intensity algorithms and compared the results with the records of the Jiuzhaigou M_S7. 0 earthquake. We found that the differences between the instrumental intensities calculated by each method and the macro intensities were within a 1-degree range,which suggested good practicality of these different methods. The results calculated by the industrial standards-based calculation method and the integrated test showed good consistency.
基金This project was sponsored by the "Ninth Five-Year ScienceTechnology Plan" (95-04-04-01-01) of the State Seismological Bureau, China
文摘By using the integral dynamic adjustment of the "segmentation rate," this paper processes the leveling repetition measurement data of the Dianxi(western Yunnan)area since the 1980s,makes the fitting of the velocity surface for vertical deformation with multi-surface function,and splits information of the vertical deformation field.The dynamic evolution of the deformation field and vertical deformation information norm-shear deformation,extension deformation,volumetric deformation,and quasi acceleration,which are the distribution characteristics of variation,are studied by using the information split before the Lijiang earthquake with MS7.0(February 3,1996)in the north of the Dianxi(western Yunnan)leveling network.The results indicate that in Dianxi(western Yunnan)area,the acute vertical differential movement of the large-scale deformation velocity high gradient belt and high information norm distribution in the Lijiang,Yongsheng,and its adjacent areas in the middle stage of the 1980s is the reflection
基金supported by the National Natural Science Foundation of China (Grant Nos. 40904023, 41274063 and 41174070)Scientific Investigation of April 20, 2013 M7.0 Sichuan Lushan Earthquake
文摘In this paper, variations of shear wave splitting in the 2013 Lushan Ms7.0 earthquake sequence were studied. By analyzing shear wave particle motion of local events in the shear wave window, the fast polarization directions and the delay time between fast and slow shear waves were derived from seismic recordings at eight stations on the southern segment of the Longmenshan fault zone. In the study region, the fast polarization directions show partition characteristics from south to north. And the systematic changes of the time delays between two split shear waves were also observed. As for spatial distribution, the NE fast polarization directions are consistent with the Longmenshan fault strike in the south of focal region, whereas the NW fast direction is parallel to the direction of regional principal compressive stress in the north of focal region. Stations BAX and TQU are respectively located on the Central and Front-range faults, and because of the direct influence of these faults, the fast directions at both stations show particularity. In time domain, after the main shock, the delay times at stations increased rapidly, and decreased after a period of time. Shear-wave splitting was caused mostly by stress-aligned microcracks in rock below the stations. The results demonstrate changes of local stress field during the main shock and the aftershocks. The stress on the Lushan Ms7.0 earthquake region increased after the main shock, with the stress release caused by the aftershocks and the stress reduced in the late stage.
基金supported by the National Natural Science Foundation of China(Grant Nos.41274008,41104004)the Basic Research Project of Institute of Earthquake Science of China Earthquake Administration(Grant No.2014IES010101)
文摘A continuous GPS array across the southern segment of the Longmenshan fault zone recorded the deformation during the process of the Lushan MS7.0 earthquake that occurred on April 20, 2013. Such data can provide meaningful information regarding the dynamic evolution of crustal deformation in the seismogenic zone. Our studies have shown that the occurrence of the Wenchuan earthquake led to the loading of compressive and sinistral shearing strain on the southern segment of the Maoxian-Wenchuan fault, whereby the extrusion strain accumulated at a greater rate than before the Wenchuan earthquake. The strain time series in the seismogenic zone revealed that the principal compression strain rates decreased from west to east in the direction of N30°–45°W. Furthermore, the area to the east of Beichuan-Yingxiu fault behaved as a zone of compressive deformation with obvious sinistral shearing deformation. The surface strain and the first shearing strain time series decreased with time, while the area to the west of the Beichuan-Yingxiu fault behaved as a zone of dextral shear deformation that increased with time. Furthermore, the regional deformation field before the Lushan earthquake showed that the rate of extrusion strain accumulation in the southern segment of the Longmenshan fault zone was obviously larger than before the Wenchuan earthquake. Moreover, the sinistral shearing strain accumulated in the area of the southern segment of the Maoxian-Wenchuan fault. Based on the above analysis, we consider that the eastward movement of the Bayan Har block increased considerably following the Wenchuan earthquake, which enhanced the accumulation of compression strain in the southern segment of the Longmenshan fault zone.
