On April 10,2025,the China International Exhibition Center(Shunyi Pavi l ion)became a symphony of roaring engines and dazzling digital light scapes as the 2025 Beijing International Motorcycle Expo kicked off.Under th...On April 10,2025,the China International Exhibition Center(Shunyi Pavi l ion)became a symphony of roaring engines and dazzling digital light scapes as the 2025 Beijing International Motorcycle Expo kicked off.Under the theme of“Promot ing Safe and Civilized Riding Awareness,Advancing the Orderly Development of Motorcycle Culture”,the event attracted over 150 global enterprises and nearly 200 brands.展开更多
In the busy streets of Lusaka,Zambia’s capital,Joel Kangwa fired up his red Haojue.It is not just a motorbike.It is the reason he wakes up each morning with purpose.He kicked the starter and the engine responded with...In the busy streets of Lusaka,Zambia’s capital,Joel Kangwa fired up his red Haojue.It is not just a motorbike.It is the reason he wakes up each morning with purpose.He kicked the starter and the engine responded with a low growl.“Working as a courier on my motorbike is a dream come true.I now earn more than double what I used to make as a salesman in the industrial area,”he said.展开更多
Florida has the highest number of motorcycle fatalities in the United States and contains the second largest population of registered motorcycles. The COVID-19 pandemic influenced the roads, traffic, and driving behav...Florida has the highest number of motorcycle fatalities in the United States and contains the second largest population of registered motorcycles. The COVID-19 pandemic influenced the roads, traffic, and driving behavior in the continental United States. Motorcycle crashes decreased during the COVID-19 years (2020 and 2021) while the fatality rates increased. The purpose of this study is to 1) investigate motorcycle crashes before and during the Pandemic period to understand the impacts on motorcycle safety and contributing factors to the crash severity levels;2) develop the crash predictive model for different degrees of severity in motorcycle crashes in Florida. Florida statewide crash data were collected. T tests have been conducted to compare the contributing factors between two periods. The injury severities are significantly different among all five levels between those during normal period and the Pandemic period. A crash predictive model has been developed to determine the facts to injury severity levels for motorcycle crashes. A total of eight variables are found to significantly increase the injury severity levels for motorcycle crashes during the Pandemic period.展开更多
Test results of reducing two stroke motorcycle emissions with new type carburettors and electronic fuel injection systems are presented. Analyses and comparison between different systems are discussed. The adoption o...Test results of reducing two stroke motorcycle emissions with new type carburettors and electronic fuel injection systems are presented. Analyses and comparison between different systems are discussed. The adoption of electronically controlled injection and corresponding electronic control technique is an effective measure of prolonged vitality to improve emissions from two stroke motorcycles. Suggestions about the strategic steps of China′s motorcycle emission control are proposed.展开更多
Aim To study the transient response of motorcycle with one tire colliding on ground. Methods Taking the colliding velocity as an independent variable, the changing law of the biggest collision inertia load of motorcy...Aim To study the transient response of motorcycle with one tire colliding on ground. Methods Taking the colliding velocity as an independent variable, the changing law of the biggest collision inertia load of motorcycle′s sprung mass, unsprung mass and driver was studied, while its front and rear tire colliding on ground respectively.Results and Conclusion According to the working conditions of motorcycle shock absorbers and the characteristic of response curve, the transient response of the acceleration, the velocity and the displacement were discussed section by section. And the result of simulating the actual JH125 motorcycle was given.展开更多
The Pd-only catalysts for motorcycle were prepared by impregnating CeO2-ZrO2-Al2O3 and CeO2-ZrO2+Al2O3 with PdCl2 aqueous solution and characterized by X-ray diffraction (XRD), oxygen storage capacity (OSC) and H2-tem...The Pd-only catalysts for motorcycle were prepared by impregnating CeO2-ZrO2-Al2O3 and CeO2-ZrO2+Al2O3 with PdCl2 aqueous solution and characterized by X-ray diffraction (XRD), oxygen storage capacity (OSC) and H2-temperature-programmed reduction (H2-TPR) methods. The XRD result indicated that the CeO2-ZrO2-Al2O3 compound prepared by co-precipitation formed a single solid solution and had good thermal stability, and Pd phase was not observed in all catalysts. The TPR results showed that the reduction temperature of Pd/CeO2-ZrO2-Al2O3 catalyst was lower than that of Pd/CeO2-ZrO2+Al2O3 catalyst whether they were fresh or aged catalysts. The Pd/CeO2-ZrO2-Al2O3 exhibited high three-way catalytic activity at low temperature, high thermal stability, and wide working window, suggesting a great potential for applications.展开更多
Objective This study aimed to use an air-liquid interface(ALI)exposure system to simulate the inhalation exposure of motorcycle exhaust particulates(MEPs)and then investigate the benchmark dose(BMD)of MEPs by evaluati...Objective This study aimed to use an air-liquid interface(ALI)exposure system to simulate the inhalation exposure of motorcycle exhaust particulates(MEPs)and then investigate the benchmark dose(BMD)of MEPs by evaluating cell relative viability(CRV)in lung epithelial BEAS-2B cells.Methods The MEPs dose was characterized by measuring the number concentration(NC),surface area concentration(SAC),and mass concentration(MC).BEAS-2B cells were exposed to MEPs at different concentrations via ALI and CRV was determined using Cell Counting Kit(CCK-8)assay.BMD software was applied to calculate BMD and the lower limit of benchmark dose(BMDL)according to Akaike Information Coefficient(AIC),with P-value based on Hill,Linear,Polynomial,and Power model.Results Our results reveal that BMD of NC and SAC were estimated by the best-fitting Hill model,while MC was estimated by Polynomial model.The BMDL for CRV following ALI exposure to MEPs were as follows:364.2#/cm^(3)for NC;0.662×10^(7)nm^(2)/cm^(3)for SAC;and 0.278μg/m^(3)for MC.Conclusion These results indicate that MEPs exposure via ALI system induces a dose-dependent decrease of CRV and provides the potential exposure threshold of MEPs in a lung cell model.展开更多
Roadside remote sensing measurement was used to explore the real-world emission status of light duty gasoline vehicles （LDGVs） and motorcycles in Macao. Both fuel-based and distance-based emission factors were deriv...Roadside remote sensing measurement was used to explore the real-world emission status of light duty gasoline vehicles （LDGVs） and motorcycles in Macao. Both fuel-based and distance-based emission factors were derived using the mass balance method. The emission concentration profile of LDGVs illustrated the benefits of tightening emission standards at the source country or region of import. The distance-based emission factors for CO, HC and NOx of LDGVs registered before 2000 were 8.00, 1.04 and 1.36 g/km, respectively. The distance-based emission factors for CO, HC and NOx of LDGVs registered in or after 2000 were 1.16, 0.15 and 0.18 g/km, respectively. The fuel-based CO emission factors of light duty motorcycles （LDMCs） and heavy duty motorcycles （HDMCs） registered before 2000 were about 10 times higher than those of LDGVs of the same age group. As the emissions of LDGVs decreased more quickly after 2000, the gap widens for newer vehicles. The distance-based HC emission factors of LDMCs and HDMCs registered before 2000 were 4.81 and 2.91 g/km, respectively. The distance-based HC emission factors of LDMCs and HDMCs registered in or after 2000 were 3.52 and 0.93 g/km, respectively. The poor emission performance of motorcycles and their larger share in the traffic flow will cause them to be the major contributor to traffic CO and HC emissions. LDMCs, especially two-stroke models, should be the priority for vehicle emission control efforts in Macao.展开更多
This paper developed 3D product models of motorcycle and engine by UGNX as well as virtual prototyping by ADAMS program with road roughness generated by MATLAB. Under the straight-line running condition, the dynamic r...This paper developed 3D product models of motorcycle and engine by UGNX as well as virtual prototyping by ADAMS program with road roughness generated by MATLAB. Under the straight-line running condition, the dynamic responses of motorcycle multibody system to both road and engine excitations were compared with those to only road excitation in terms of vertical acceleration response, amplitude frequency response and power spectral density. The comparisons of simulation data showed that the response due to flat road excitation was around 20 Hz, while that to the combined excitations was in a wide frequency band, of which the major components focused on 10 Hz, 15 Hz, 35 Hz ,70 Hz, 100 Hz and even higher frequencies, reflecting the characteristics of engine excitation based on its unbalanced inertia force and torque. It is concluded that the high fidelity virtual prototyping can simulate the dynamics of motorcycle product well in investigating the vibration and ride comfort performance.展开更多
Monitoring of benzene, toluene and xylenes （BTEX） was conducted along with traffic counts at 17 roadside sites in urban areas of HoChiMinh. Toluene was the most abundant substance, followed by p,m-xylenes, benzene, ...Monitoring of benzene, toluene and xylenes （BTEX） was conducted along with traffic counts at 17 roadside sites in urban areas of HoChiMinh. Toluene was the most abundant substance, followed by p,m-xylenes, benzene, o-xylene and ethylbenzene. The maximum observed hour-average benzene concentration was 254 μg/m3 . Motorcycles contributed to 91% of the traffic fleet. High correlations among BTEX species, between BTEX concentrations and the volume of on-road motorcycles, and between inter-species ratios in air and in gasoline indicate the motorcycle-exhaust origin of BTEX species. Daily concentrations of benzene, toluene, ethylbenzene, p,m-xylenes and o-xylene were 56, 121, 21, 64 and 23 μg/m 3 , respectively. p,m-xylenes possess the highest ozone formation potential among the BTEX family.展开更多
Launching the evaluation research of green transportation can grasp the green transportation implementation accurately and diagnose the existing problems. From the perspective of green transportation, this research ch...Launching the evaluation research of green transportation can grasp the green transportation implementation accurately and diagnose the existing problems. From the perspective of green transportation, this research chose Dongguan “motorcycle ban” policy as the research object, and constructed secondary evaluation index system in transportation and environmental harmony, transportation and future harmony, transportation and society harmony, transportation and resource harmony, four dimensions. Then it used fuzzy comprehensive evaluation model to do the evaluation and found that the policy’s positive effect on the Dongguan green transportation development was average. Finally, based on the evaluation results, measures and advices were proposed.展开更多
Driving cycle of vehicle has been used in emission estimation and fuel consumption study. Existing method of data collection using car chasing technique is expensive. The technique using micro simulation approach is c...Driving cycle of vehicle has been used in emission estimation and fuel consumption study. Existing method of data collection using car chasing technique is expensive. The technique using micro simulation approach is cheaper and fast to derive the driving cycle. In this paper a traffic simulation model Driving Cycle Micro-Simulation Model for Motorcycle has been developed. The issue of lateral and longitudinal movement aspect in motorcycle driving has been examined in the model. Parameters to cover such movement have been built in the model and applied on a stretch in Edinburgh city of Scotland. Results from model have been both calibrated and validated. The results show that Driving Cycle Micro-Simulation Model for Motorcycle gives better representation of driving cycle and it can be used to understand the effect of driving modes on emission for better understanding of vehicular emission control.展开更多
Traffic simulation can help to evaluate the impact of different mobility behaviors on the traffic flow from safety, efficiency, and environmental views. The objective of this paper is to extend the SUMO (Simulation of...Traffic simulation can help to evaluate the impact of different mobility behaviors on the traffic flow from safety, efficiency, and environmental views. The objective of this paper is to extend the SUMO (Simulation of Urban Mobility) road traffic simulator to model and evaluate the impact of motorcycles mobility on vehicular traffic. First, we go through diverse mobility aspects and models for motorcycles in SUMO. Later, we opt for the most suitable mobility models of motorcycles. Finally, the impact of motorcycle mobility on different kinds of vehicles is investigated in terms of environment, fuel consumption, velocity and travel time. The result of modeling and evaluation shows that based on the mobility model of the motorcycle, vehicular traffic flow can be enhanced or deteriorated.展开更多
In order to improve competitive ability of market, mo torcycle enterprises, special the small and middle sized ones must use IT to org anize social resource and adopt effective production mode, namely the dispersed ne...In order to improve competitive ability of market, mo torcycle enterprises, special the small and middle sized ones must use IT to org anize social resource and adopt effective production mode, namely the dispersed networked design and manufacturing (DNDM), which was put forward and proved to b e one of vitality production modes in recent years. In responding to the new pro duction mode of VMCE, a dispersed networked CAD/CAM system (DNCADMS) of motorcyc le products should be developed. The objective of this paper is to investigate a new design and manufacturing mode and technical environment of motorcycle produ ction based on the concept of the DNDM for the small and meddle sized motorcycle enterprises. Because there are various CAx software systems, including differen t kinds of isolated CD, CAD, CAE, CAPP, CAM, PDM, and so on, are used at differe nt stages of the life period of motorcycle products under heterogeneous environm ents, to build a DNCADMS of motorcycle with high performance, some key issues, n amely the architecture of the DNCADMS, the integration of the isolated CAx softw are systems (CAxs), the data communication and exchange between these isolated s ystems and the data share problem under the dispersed heterogeneous database env ironment, should be solved well. For this, the idea we propose is the combinatio n of Web, CORBA, STEP and Java, which provides an effective mechanism to support the integration of isolated CAxs, and support communication and interoperabilit y among CAx systems. Each isolated CAx has been encapsulated respectively by a c ontainer, which is implemented by the ORBs and the IDL of the COBRA technology s tandard, and managed by the application index server. Each container is connecte d with the others by a local network or intranet/Extranet/internet and communica tes through network. For exchanging design and manufacturing information and kno wledge via a local network or the Internet, a commmerical product data translato r has been employed as a product data translating server to complete product dat a communication and exchange between the isolated CAx systems. And for solving t he data share problem under the dispersed networked heterogeneous database envir onment, the idea we propose is to build a meta-database for the native database s, which is a dispersed database, and links various native databases into a whol e logical database. For managing the meta-database, the database index server, a Java-based integrating mechanism, has been also put forward in this paper. Th e application and database index servers have been implemented with Java lan guage. Moreover, the native data base and knowledge base related to each isolate d CAx are be integrated into a dispersed database system by a meta-base.展开更多
Three-dimensional transient numerical simulation of gas exchange process in a four-stroke motorcycle engine with a semi-spherical combustion chamber with two tilt valves was studied. Combination of the grid re-meshing...Three-dimensional transient numerical simulation of gas exchange process in a four-stroke motorcycle engine with a semi-spherical combustion chamber with two tilt valves was studied. Combination of the grid re-meshing method and the snapper technique made the valves move smoothly. The flow structure and pattern in a complete engine cycle were described in detail. Tumble ratios around the x-axis and y-axis were analyzed. Comparison of computed pressure with experimental pressure under motored condition revealed that the simulation had high calculation precision; CFD simulation can be regarded as an im-portant tool for resolving the complex aerodynamic behavior in motorcycle engines.展开更多
A novel embedded-type permanent magnetic motor for hybrid motorcycle, which employs asymmetric design of eccentric air-gap, is proposed in the paper. This special design of air-gap well conforms to the mono-directiona...A novel embedded-type permanent magnetic motor for hybrid motorcycle, which employs asymmetric design of eccentric air-gap, is proposed in the paper. This special design of air-gap well conforms to the mono-directional operation characteristic of motorcycle and effectively suppresses the distortion of air-gap magnetic field caused by armature reaction. Hence the torque ripple is reduced. A drive system consisting of the newly-designed Nd-Fe-B permanent magnet synchronous motor and parallel-MOSFET three-phase inverter for hybrid motorcycle propulsion is established. Wide-range speed operation is realized through a simple and novel control strategy. Computer simulation is described and experimental results given to verify the practicality of the proposed motor design and control strategy.展开更多
This paper presents a simulation and modeling package based on Matlab for a parallel hybrid electric motorcycle (HEM). The package consists of several main detailed models: internal combustion engine (ICE), motor, con...This paper presents a simulation and modeling package based on Matlab for a parallel hybrid electric motorcycle (HEM). The package consists of several main detailed models: internal combustion engine (ICE), motor, continuously variable transmission (CVT), battery, energy management system (EMS) etc . Each component is built as a library, and can be connected together according to the parallel HEM's topology. Simulation results, such as ICE power demand, motor power demand, battery instantaneous state of charge (SOC), pollution emissions etc. are given and discussed. Lastly experimental data verify our simulation results.展开更多
The glutathione-S-transferase genes mainly the GSTM1 and GSTT1 alleles are responsible for the synthesis of detoxication enzymes that can remove toxic substances. The objective of this study is to seek changes in the ...The glutathione-S-transferase genes mainly the GSTM1 and GSTT1 alleles are responsible for the synthesis of detoxication enzymes that can remove toxic substances. The objective of this study is to seek changes in the genetic polymorphism of glutathione-S-transferase GSTM1 and GSTT1 in motorcycle drivers exposed to BTEX. Our study group consists of 60 motorcycle drivers including 30 professional and 30 non-professional. Blood samples were preleveled from the study population in the EDTA tubes and DNA was extracted by the phenol/chloroform method. The PCR technique was used to determine the presence or absence of genes. Our results showed that the percentage of GSTM1 null genotype has a statistically significant difference (P = 0.02), while the percentage of GSTT1 null genotype was non-significant (P = 0.76) between the two groups. The percentage of deletion of both genes is higher in professional than non-professional motorcycle drivers. Air pollution in Cotonou by BTEX seems to influence the deletion of the GSTM1 and GSTT1 genes at a higher percentage among professional than non-professional motorcycle drivers.展开更多
WMTC,which means a worldwide motorcycle testing cycle,is now regarded as the most possible choice for the global motorcycle emission testing cycle,but whether or not it can be used in China is still unknown.In this st...WMTC,which means a worldwide motorcycle testing cycle,is now regarded as the most possible choice for the global motorcycle emission testing cycle,but whether or not it can be used in China is still unknown.In this study,a large number of data on the speed-time trace of motorcycles were sampled from various kinds of roads in 5 cities in China.Based on a series of criterion numbers defined,the driving character of motorcycles in the real-road conditions of China was obtained.With the aid of a specially designed program,an emission testing cycle that can indicate the driving characteristics of motorcycle in the real-road conditions was synthesized,and the exhaust emission tests of 20 motorcycles under the synchronized cycle and WMTC were carried out based on a CVS system and a motorcycle chassis dynamometer.The results show that although there do exist differences in some criterion numbers between the real-road condition and WMTC,such as proportion of idling mode,mean speed,mean running speed and the average acceleration and deceleration rates,the driving behaviors are similar.The results of exhaust emission tests indicate that the emission values of motorcycles under the synchronized cycle and WMTC have a relatively strong correlation.This means that WMTC can be introduced as a standard motorcycle emission test regulation into China.展开更多
The purpose of this study is to evaluate the safety performance of four exit ramp types and the major contributing factors on motorcycle crashes and injury severity of motorcycle riders. A six-year crash data were col...The purpose of this study is to evaluate the safety performance of four exit ramp types and the major contributing factors on motorcycle crashes and injury severity of motorcycle riders. A six-year crash data were collected in Florida, and a web-based survey (234 samples) was conducted. 573 crashes were found at 419 exits, including 178 diamond exits, 71 directional exits, 85 loop exits and 85 outer connection exits. For a diamond exit, both the survey and crash data showed that this type was safer and more preferable by motorcycle riders;while a loop exit was the most dangerous exit due to the sharp curve and a certain length of curve with limited visibility. For a directional exit, longer ramp lengths and the reverse curvature are the major factors causing motorcycle crashes. For an outer connection exit, the riders rated it as a safe type;however, the data showed higher average crash frequency and rate than those at diamond exits or directional exits. The possible reason could be the unexpected curvature in the middle of the ramp, which could be dangerous if the rider is not familiar with the exit ramp location or doesn’t pay attention to the ramp curvatures. The crash predictive model was developed, and the result indicated that if all remained the same, a directional exit, a loop exit, or an outer connection exit will have 16%, 27%, and 42% more crashes than a diamond exit, respectively. The findings from this study can help policy-makers and engineers to develop and apply effective countermeasures to reduce motorcycle crashes and injury severity levels for different exit ramp types.展开更多
文摘On April 10,2025,the China International Exhibition Center(Shunyi Pavi l ion)became a symphony of roaring engines and dazzling digital light scapes as the 2025 Beijing International Motorcycle Expo kicked off.Under the theme of“Promot ing Safe and Civilized Riding Awareness,Advancing the Orderly Development of Motorcycle Culture”,the event attracted over 150 global enterprises and nearly 200 brands.
文摘In the busy streets of Lusaka,Zambia’s capital,Joel Kangwa fired up his red Haojue.It is not just a motorbike.It is the reason he wakes up each morning with purpose.He kicked the starter and the engine responded with a low growl.“Working as a courier on my motorbike is a dream come true.I now earn more than double what I used to make as a salesman in the industrial area,”he said.
文摘Florida has the highest number of motorcycle fatalities in the United States and contains the second largest population of registered motorcycles. The COVID-19 pandemic influenced the roads, traffic, and driving behavior in the continental United States. Motorcycle crashes decreased during the COVID-19 years (2020 and 2021) while the fatality rates increased. The purpose of this study is to 1) investigate motorcycle crashes before and during the Pandemic period to understand the impacts on motorcycle safety and contributing factors to the crash severity levels;2) develop the crash predictive model for different degrees of severity in motorcycle crashes in Florida. Florida statewide crash data were collected. T tests have been conducted to compare the contributing factors between two periods. The injury severities are significantly different among all five levels between those during normal period and the Pandemic period. A crash predictive model has been developed to determine the facts to injury severity levels for motorcycle crashes. A total of eight variables are found to significantly increase the injury severity levels for motorcycle crashes during the Pandemic period.
文摘Test results of reducing two stroke motorcycle emissions with new type carburettors and electronic fuel injection systems are presented. Analyses and comparison between different systems are discussed. The adoption of electronically controlled injection and corresponding electronic control technique is an effective measure of prolonged vitality to improve emissions from two stroke motorcycles. Suggestions about the strategic steps of China′s motorcycle emission control are proposed.
文摘Aim To study the transient response of motorcycle with one tire colliding on ground. Methods Taking the colliding velocity as an independent variable, the changing law of the biggest collision inertia load of motorcycle′s sprung mass, unsprung mass and driver was studied, while its front and rear tire colliding on ground respectively.Results and Conclusion According to the working conditions of motorcycle shock absorbers and the characteristic of response curve, the transient response of the acceleration, the velocity and the displacement were discussed section by section. And the result of simulating the actual JH125 motorcycle was given.
基金Project supported by the National High Technology Research and Development Program of China (863 Program,2006AA06Z347)the Specialized Research Fund for the Doctoral Program of Higher Education (20070610026)
文摘The Pd-only catalysts for motorcycle were prepared by impregnating CeO2-ZrO2-Al2O3 and CeO2-ZrO2+Al2O3 with PdCl2 aqueous solution and characterized by X-ray diffraction (XRD), oxygen storage capacity (OSC) and H2-temperature-programmed reduction (H2-TPR) methods. The XRD result indicated that the CeO2-ZrO2-Al2O3 compound prepared by co-precipitation formed a single solid solution and had good thermal stability, and Pd phase was not observed in all catalysts. The TPR results showed that the reduction temperature of Pd/CeO2-ZrO2-Al2O3 catalyst was lower than that of Pd/CeO2-ZrO2+Al2O3 catalyst whether they were fresh or aged catalysts. The Pd/CeO2-ZrO2-Al2O3 exhibited high three-way catalytic activity at low temperature, high thermal stability, and wide working window, suggesting a great potential for applications.
基金supported by the funding from the National Natural Science Foundation of China[No.81472955,82073596 and 91643203]。
文摘Objective This study aimed to use an air-liquid interface(ALI)exposure system to simulate the inhalation exposure of motorcycle exhaust particulates(MEPs)and then investigate the benchmark dose(BMD)of MEPs by evaluating cell relative viability(CRV)in lung epithelial BEAS-2B cells.Methods The MEPs dose was characterized by measuring the number concentration(NC),surface area concentration(SAC),and mass concentration(MC).BEAS-2B cells were exposed to MEPs at different concentrations via ALI and CRV was determined using Cell Counting Kit(CCK-8)assay.BMD software was applied to calculate BMD and the lower limit of benchmark dose(BMDL)according to Akaike Information Coefficient(AIC),with P-value based on Hill,Linear,Polynomial,and Power model.Results Our results reveal that BMD of NC and SAC were estimated by the best-fitting Hill model,while MC was estimated by Polynomial model.The BMDL for CRV following ALI exposure to MEPs were as follows:364.2#/cm^(3)for NC;0.662×10^(7)nm^(2)/cm^(3)for SAC;and 0.278μg/m^(3)for MC.Conclusion These results indicate that MEPs exposure via ALI system induces a dose-dependent decrease of CRV and provides the potential exposure threshold of MEPs in a lung cell model.
基金supported by the Macao Environmental Protection Bureau
文摘Roadside remote sensing measurement was used to explore the real-world emission status of light duty gasoline vehicles （LDGVs） and motorcycles in Macao. Both fuel-based and distance-based emission factors were derived using the mass balance method. The emission concentration profile of LDGVs illustrated the benefits of tightening emission standards at the source country or region of import. The distance-based emission factors for CO, HC and NOx of LDGVs registered before 2000 were 8.00, 1.04 and 1.36 g/km, respectively. The distance-based emission factors for CO, HC and NOx of LDGVs registered in or after 2000 were 1.16, 0.15 and 0.18 g/km, respectively. The fuel-based CO emission factors of light duty motorcycles （LDMCs） and heavy duty motorcycles （HDMCs） registered before 2000 were about 10 times higher than those of LDGVs of the same age group. As the emissions of LDGVs decreased more quickly after 2000, the gap widens for newer vehicles. The distance-based HC emission factors of LDMCs and HDMCs registered before 2000 were 4.81 and 2.91 g/km, respectively. The distance-based HC emission factors of LDMCs and HDMCs registered in or after 2000 were 3.52 and 0.93 g/km, respectively. The poor emission performance of motorcycles and their larger share in the traffic flow will cause them to be the major contributor to traffic CO and HC emissions. LDMCs, especially two-stroke models, should be the priority for vehicle emission control efforts in Macao.
基金Supported by National Natural Science Foundation of China (No. 51176138)
文摘This paper developed 3D product models of motorcycle and engine by UGNX as well as virtual prototyping by ADAMS program with road roughness generated by MATLAB. Under the straight-line running condition, the dynamic responses of motorcycle multibody system to both road and engine excitations were compared with those to only road excitation in terms of vertical acceleration response, amplitude frequency response and power spectral density. The comparisons of simulation data showed that the response due to flat road excitation was around 20 Hz, while that to the combined excitations was in a wide frequency band, of which the major components focused on 10 Hz, 15 Hz, 35 Hz ,70 Hz, 100 Hz and even higher frequencies, reflecting the characteristics of engine excitation based on its unbalanced inertia force and torque. It is concluded that the high fidelity virtual prototyping can simulate the dynamics of motorcycle product well in investigating the vibration and ride comfort performance.
基金supported by Vietnam National University, HoChiMinh City and Vietnam National Foundation for Development of Science and Technology
文摘Monitoring of benzene, toluene and xylenes （BTEX） was conducted along with traffic counts at 17 roadside sites in urban areas of HoChiMinh. Toluene was the most abundant substance, followed by p,m-xylenes, benzene, o-xylene and ethylbenzene. The maximum observed hour-average benzene concentration was 254 μg/m3 . Motorcycles contributed to 91% of the traffic fleet. High correlations among BTEX species, between BTEX concentrations and the volume of on-road motorcycles, and between inter-species ratios in air and in gasoline indicate the motorcycle-exhaust origin of BTEX species. Daily concentrations of benzene, toluene, ethylbenzene, p,m-xylenes and o-xylene were 56, 121, 21, 64 and 23 μg/m 3 , respectively. p,m-xylenes possess the highest ozone formation potential among the BTEX family.
文摘Launching the evaluation research of green transportation can grasp the green transportation implementation accurately and diagnose the existing problems. From the perspective of green transportation, this research chose Dongguan “motorcycle ban” policy as the research object, and constructed secondary evaluation index system in transportation and environmental harmony, transportation and future harmony, transportation and society harmony, transportation and resource harmony, four dimensions. Then it used fuzzy comprehensive evaluation model to do the evaluation and found that the policy’s positive effect on the Dongguan green transportation development was average. Finally, based on the evaluation results, measures and advices were proposed.
文摘Driving cycle of vehicle has been used in emission estimation and fuel consumption study. Existing method of data collection using car chasing technique is expensive. The technique using micro simulation approach is cheaper and fast to derive the driving cycle. In this paper a traffic simulation model Driving Cycle Micro-Simulation Model for Motorcycle has been developed. The issue of lateral and longitudinal movement aspect in motorcycle driving has been examined in the model. Parameters to cover such movement have been built in the model and applied on a stretch in Edinburgh city of Scotland. Results from model have been both calibrated and validated. The results show that Driving Cycle Micro-Simulation Model for Motorcycle gives better representation of driving cycle and it can be used to understand the effect of driving modes on emission for better understanding of vehicular emission control.
文摘Traffic simulation can help to evaluate the impact of different mobility behaviors on the traffic flow from safety, efficiency, and environmental views. The objective of this paper is to extend the SUMO (Simulation of Urban Mobility) road traffic simulator to model and evaluate the impact of motorcycles mobility on vehicular traffic. First, we go through diverse mobility aspects and models for motorcycles in SUMO. Later, we opt for the most suitable mobility models of motorcycles. Finally, the impact of motorcycle mobility on different kinds of vehicles is investigated in terms of environment, fuel consumption, velocity and travel time. The result of modeling and evaluation shows that based on the mobility model of the motorcycle, vehicular traffic flow can be enhanced or deteriorated.
文摘In order to improve competitive ability of market, mo torcycle enterprises, special the small and middle sized ones must use IT to org anize social resource and adopt effective production mode, namely the dispersed networked design and manufacturing (DNDM), which was put forward and proved to b e one of vitality production modes in recent years. In responding to the new pro duction mode of VMCE, a dispersed networked CAD/CAM system (DNCADMS) of motorcyc le products should be developed. The objective of this paper is to investigate a new design and manufacturing mode and technical environment of motorcycle produ ction based on the concept of the DNDM for the small and meddle sized motorcycle enterprises. Because there are various CAx software systems, including differen t kinds of isolated CD, CAD, CAE, CAPP, CAM, PDM, and so on, are used at differe nt stages of the life period of motorcycle products under heterogeneous environm ents, to build a DNCADMS of motorcycle with high performance, some key issues, n amely the architecture of the DNCADMS, the integration of the isolated CAx softw are systems (CAxs), the data communication and exchange between these isolated s ystems and the data share problem under the dispersed heterogeneous database env ironment, should be solved well. For this, the idea we propose is the combinatio n of Web, CORBA, STEP and Java, which provides an effective mechanism to support the integration of isolated CAxs, and support communication and interoperabilit y among CAx systems. Each isolated CAx has been encapsulated respectively by a c ontainer, which is implemented by the ORBs and the IDL of the COBRA technology s tandard, and managed by the application index server. Each container is connecte d with the others by a local network or intranet/Extranet/internet and communica tes through network. For exchanging design and manufacturing information and kno wledge via a local network or the Internet, a commmerical product data translato r has been employed as a product data translating server to complete product dat a communication and exchange between the isolated CAx systems. And for solving t he data share problem under the dispersed networked heterogeneous database envir onment, the idea we propose is to build a meta-database for the native database s, which is a dispersed database, and links various native databases into a whol e logical database. For managing the meta-database, the database index server, a Java-based integrating mechanism, has been also put forward in this paper. Th e application and database index servers have been implemented with Java lan guage. Moreover, the native data base and knowledge base related to each isolate d CAx are be integrated into a dispersed database system by a meta-base.
文摘Three-dimensional transient numerical simulation of gas exchange process in a four-stroke motorcycle engine with a semi-spherical combustion chamber with two tilt valves was studied. Combination of the grid re-meshing method and the snapper technique made the valves move smoothly. The flow structure and pattern in a complete engine cycle were described in detail. Tumble ratios around the x-axis and y-axis were analyzed. Comparison of computed pressure with experimental pressure under motored condition revealed that the simulation had high calculation precision; CFD simulation can be regarded as an im-portant tool for resolving the complex aerodynamic behavior in motorcycle engines.
文摘A novel embedded-type permanent magnetic motor for hybrid motorcycle, which employs asymmetric design of eccentric air-gap, is proposed in the paper. This special design of air-gap well conforms to the mono-directional operation characteristic of motorcycle and effectively suppresses the distortion of air-gap magnetic field caused by armature reaction. Hence the torque ripple is reduced. A drive system consisting of the newly-designed Nd-Fe-B permanent magnet synchronous motor and parallel-MOSFET three-phase inverter for hybrid motorcycle propulsion is established. Wide-range speed operation is realized through a simple and novel control strategy. Computer simulation is described and experimental results given to verify the practicality of the proposed motor design and control strategy.
文摘This paper presents a simulation and modeling package based on Matlab for a parallel hybrid electric motorcycle (HEM). The package consists of several main detailed models: internal combustion engine (ICE), motor, continuously variable transmission (CVT), battery, energy management system (EMS) etc . Each component is built as a library, and can be connected together according to the parallel HEM's topology. Simulation results, such as ICE power demand, motor power demand, battery instantaneous state of charge (SOC), pollution emissions etc. are given and discussed. Lastly experimental data verify our simulation results.
文摘The glutathione-S-transferase genes mainly the GSTM1 and GSTT1 alleles are responsible for the synthesis of detoxication enzymes that can remove toxic substances. The objective of this study is to seek changes in the genetic polymorphism of glutathione-S-transferase GSTM1 and GSTT1 in motorcycle drivers exposed to BTEX. Our study group consists of 60 motorcycle drivers including 30 professional and 30 non-professional. Blood samples were preleveled from the study population in the EDTA tubes and DNA was extracted by the phenol/chloroform method. The PCR technique was used to determine the presence or absence of genes. Our results showed that the percentage of GSTM1 null genotype has a statistically significant difference (P = 0.02), while the percentage of GSTT1 null genotype was non-significant (P = 0.76) between the two groups. The percentage of deletion of both genes is higher in professional than non-professional motorcycle drivers. Air pollution in Cotonou by BTEX seems to influence the deletion of the GSTM1 and GSTT1 genes at a higher percentage among professional than non-professional motorcycle drivers.
基金Supported by Tianjin Municipal Science and Technology Commission(No.05YFJMJC11100and No.07JCYBJC03900)Ministry of Education of China(No.20020056046).
文摘WMTC,which means a worldwide motorcycle testing cycle,is now regarded as the most possible choice for the global motorcycle emission testing cycle,but whether or not it can be used in China is still unknown.In this study,a large number of data on the speed-time trace of motorcycles were sampled from various kinds of roads in 5 cities in China.Based on a series of criterion numbers defined,the driving character of motorcycles in the real-road conditions of China was obtained.With the aid of a specially designed program,an emission testing cycle that can indicate the driving characteristics of motorcycle in the real-road conditions was synthesized,and the exhaust emission tests of 20 motorcycles under the synchronized cycle and WMTC were carried out based on a CVS system and a motorcycle chassis dynamometer.The results show that although there do exist differences in some criterion numbers between the real-road condition and WMTC,such as proportion of idling mode,mean speed,mean running speed and the average acceleration and deceleration rates,the driving behaviors are similar.The results of exhaust emission tests indicate that the emission values of motorcycles under the synchronized cycle and WMTC have a relatively strong correlation.This means that WMTC can be introduced as a standard motorcycle emission test regulation into China.
文摘The purpose of this study is to evaluate the safety performance of four exit ramp types and the major contributing factors on motorcycle crashes and injury severity of motorcycle riders. A six-year crash data were collected in Florida, and a web-based survey (234 samples) was conducted. 573 crashes were found at 419 exits, including 178 diamond exits, 71 directional exits, 85 loop exits and 85 outer connection exits. For a diamond exit, both the survey and crash data showed that this type was safer and more preferable by motorcycle riders;while a loop exit was the most dangerous exit due to the sharp curve and a certain length of curve with limited visibility. For a directional exit, longer ramp lengths and the reverse curvature are the major factors causing motorcycle crashes. For an outer connection exit, the riders rated it as a safe type;however, the data showed higher average crash frequency and rate than those at diamond exits or directional exits. The possible reason could be the unexpected curvature in the middle of the ramp, which could be dangerous if the rider is not familiar with the exit ramp location or doesn’t pay attention to the ramp curvatures. The crash predictive model was developed, and the result indicated that if all remained the same, a directional exit, a loop exit, or an outer connection exit will have 16%, 27%, and 42% more crashes than a diamond exit, respectively. The findings from this study can help policy-makers and engineers to develop and apply effective countermeasures to reduce motorcycle crashes and injury severity levels for different exit ramp types.
