In recent decades,control performance monitoring(CPM)has experienced remarkable progress in research and industrial applications.While CPM research has been investigated using various benchmarks,the historical data be...In recent decades,control performance monitoring(CPM)has experienced remarkable progress in research and industrial applications.While CPM research has been investigated using various benchmarks,the historical data benchmark(HIS)has garnered the most attention due to its practicality and effectiveness.However,existing CPM reviews usually focus on the theoretical benchmark,and there is a lack of an in-depth review that thoroughly explores HIS-based methods.In this article,a comprehensive overview of HIS-based CPM is provided.First,we provide a novel static-dynamic perspective on data-level manifestations of control performance underlying typical controller capacities including regulation and servo:static and dynamic properties.The static property portrays time-independent variability in system output,and the dynamic property describes temporal behavior driven by closed-loop feedback.Accordingly,existing HIS-based CPM approaches and their intrinsic motivations are classified and analyzed from these two perspectives.Specifically,two mainstream solutions for CPM methods are summarized,including static analysis and dynamic analysis,which match data-driven techniques with actual controlling behavior.Furthermore,this paper also points out various opportunities and challenges faced in CPM for modern industry and provides promising directions in the context of artificial intelligence for inspiring future research.展开更多
This article focuses on the current computer monitoring and control as the research direction,studying the application strategies of artificial intelligence and big data technology in this field.It includes an introdu...This article focuses on the current computer monitoring and control as the research direction,studying the application strategies of artificial intelligence and big data technology in this field.It includes an introduction to artificial intelligence and big data technology,the application strategies of artificial intelligence and big data technology in computer hardware,software,and network monitoring,as well as the application strategies of artificial intelligence and big data technology in computer process,access,and network control.This analysis aims to serve as a reference for the application of artificial intelligence and big data technology in computer monitoring and control,ultimately enhancing the security of computer systems.展开更多
With the rapid development of wireless technologies, it is possible for Chinese greenhouses to be equipped with wireless sensor networks due to their low-cost, simplicity and mobility. In the current study, we compare...With the rapid development of wireless technologies, it is possible for Chinese greenhouses to be equipped with wireless sensor networks due to their low-cost, simplicity and mobility. In the current study, we compared the advantages of ZigBee with other two similar wireless networking protocols, Wi-Fi and Bluetooth, and proposed a wireless solution for green- house monitoring and control system based on ZigBee technology. As an explorative application of ZigBee technology in Chinese greenhouse, it may promote Chinese protected agriculture.展开更多
Multivariate statistical process monitoring and control (MSPM&C) methods for chemical process monitoring with statistical projection techniques such as principal component analysis (PCA) and partial least squares ...Multivariate statistical process monitoring and control (MSPM&C) methods for chemical process monitoring with statistical projection techniques such as principal component analysis (PCA) and partial least squares (PLS) are surveyed in this paper. The four-step procedure of performing MSPM&C for chemical process, modeling of processes, detecting abnormal events or faults, identifying the variable(s) responsible for the faults and diagnosing the source cause for the abnormal behavior, is analyzed. Several main research directions of MSPM&C reported in the literature are discussed, such as multi-way principal component analysis (MPCA) for batch process, statistical monitoring and control for nonlinear process, dynamic PCA and dynamic PLS, and on-line quality control by inferential models. Industrial applications of MSPM&C to several typical chemical processes, such as chemical reactor, distillation column, polymerization process, petroleum refinery units, are summarized. Finally, some concluding remarks and future considerations are made.展开更多
This paper describes a hierarchical architecture and a high-performance and interoperability protocol for centralized monitoring and controlling systems (CMCS) . The protocol we proposed can interoperate different mon...This paper describes a hierarchical architecture and a high-performance and interoperability protocol for centralized monitoring and controlling systems (CMCS) . The protocol we proposed can interoperate different monitoring and controlling systems constructed by different companies, each with different functions and communication protocols. The protocol reduces the amount of traffic and has real-time and high-perfor-mance advantages. The protocol was implemented in CMCS for telecommunication power supply and air-condi-tioner used by the Telecommunication Bureau of Zhejiang Province. This paper deals with the hierarchical architecture and function of CMCS and packet format, command ID, and SDL description of its protocol. We also discuss the properties of the interoperability and performance of the protocol in this paper.展开更多
Deformation can directly reflect the working behavior of the dam,so determining the deformation monitoring control value can effectively monitor the safety of dam operation.The traditional dam deformation monitoring c...Deformation can directly reflect the working behavior of the dam,so determining the deformation monitoring control value can effectively monitor the safety of dam operation.The traditional dam deformation monitoring control value only considers the single measuring point.In order to overcome the limitation,this paper presents a new method to determine the monitoring control value for concrete gravity dam based on the deformations of multi-measuring points.A dam’s comprehensive deformation displacement is determined by the measured values at different measuring points on the positive inverted vertical line and the corresponding weight of eachmeasuring point.The projection pursuit method(PPM)combined with the grey wolf optimization(GWO)algorithm is used to determine the weight of each measuring point according to the spatial correlation distribution characteristics of dam deformation.The peaks over threshold(POT)model based on the extreme value theory is adopted to determine the monitoring control value with the obtained dam comprehensive deformation displacement.In addition,the POTmodel is improved with the automatic threshold determinationmethod based on the 3σcriterion in probability theory and the GWO algorithm,which can avoid subjectivity and randomness in determining the threshold.The results of the engineering application show the feasibility and applicability of the proposed method.展开更多
The performance of Smith prediction monitoring automatic gauge control(AGC) system is influenced by model mismatching greatly in strip rolling process. Aiming at this problem, a feedback-assisted iterative learning co...The performance of Smith prediction monitoring automatic gauge control(AGC) system is influenced by model mismatching greatly in strip rolling process. Aiming at this problem, a feedback-assisted iterative learning control strategy, which learned unknown modeling error by using previous control information repeatedly, was introduced into Smith prediction monitoring AGC system. Firstly, conventional Smith predictor and improved Smith predictor with PI-P controller were analyzed. Secondly, on the basis of establishing of feedback-assisted iterative learning control strategy for improved Smith predictor, process control signal update law and control error were deduced, then convergence condition of this strategy was put forward and proved. Finally, after modeling the automatic position control system, the PI-P Smith prediction monitoring AGC system with feedback-assisted iterative learning control was researched through simulation. Simulation results indicate that this system remains stable during model mismatching. The robustness and response of monitoring AGC is improved by development of feedback-assisted iterative learning control strategy for PI-P Smith predictor.展开更多
This paper presents a multi-interface embedded server architecture for remote real-time monitoring system and distributed monitoring applications. In the scheme,an embedded microprocessor( LPC3250 from NXP) is chosen ...This paper presents a multi-interface embedded server architecture for remote real-time monitoring system and distributed monitoring applications. In the scheme,an embedded microprocessor( LPC3250 from NXP) is chosen as the CPU of the embedded server with a linux operation system( OS) environment. The embedded server provides multiple interfaces for supporting various application scenarios. The whole network is based on local area network and adopts the Browser / Server( B / S) model. The monitoring and control node is as a browser endpoint and the remote node with an embedded server is as a server endpoint. Users can easily acquire various sensors information through writing Internet protocol address of remote node on the computer browser. Compared with client / server( C / S) mode,B / S model needs less maintain and can be applicable to large user group. In addition,a simple network management protocol( SNMP) is used for management of devices in Internet protocol( IP) networks. The results of the demonstration experiment show that the proposed system gives good support to manage the network from different user terminals and allows the users to better interact with the ambient environment.展开更多
In view of characteristics of solar photovoltaic (PV) power station such as the decentralized layout and massive monitoring and control information, a solar PV power generation monitoring and control system has been d...In view of characteristics of solar photovoltaic (PV) power station such as the decentralized layout and massive monitoring and control information, a solar PV power generation monitoring and control system has been designed. The system is designed into three layers namely the sensor and actuator layer, the PLC field monitoring and control layer and the remote network monitoring and control layer. Through ZigBee wireless network, PROFIBUS and GPRS wireless network, the system makes the three layers exchange information rapidly, and the system supervises not only various operational parameters of the power generating system but also weather changes as a way to change the solar tracking strategy of the PV power generating system and reduce the operating energy consumption of the system. Through the hardware redundant design of PLC central controller and the upper computer, the solar PV power station can be more secure and reliable when running.展开更多
In this work, an adaptive control constraint system has been developed for computer numerical control （CNC） turning based on the feedback control and adaptive control/self-tuning control. In an adaptive controlled s...In this work, an adaptive control constraint system has been developed for computer numerical control （CNC） turning based on the feedback control and adaptive control/self-tuning control. In an adaptive controlled system, the signals from the online measurement have to be processed and fed back to the machine tool controller to adjust the cutting parameters so that the machining can be stopped once a certain threshold is crossed. The main focus of the present work is to develop a reliable adaptive control system, and the objective of the control system is to control the cutting parameters and maintain the displacement and tool flank wear under constraint valves for a particular workpiece and tool combination as per ISO standard. Using Matlab Simulink, the digital adaption of the cutting parameters for experiment has confirmed the efficiency of the adaptively controlled condition monitoring system, which is reflected in different machining processes at varying machining conditions. This work describes the state of the art of the adaptive control constraint （ACC） machining systems for turning. AIS14140 steel of 150 BHN hardness is used as the workpiece material, and carbide inserts are used as cutting tool material throughout the experiment. With the developed approach, it is possible to predict the tool condition pretty accurately, if the feed and surface roughness are measured at identical conditions. As part of the present research work, the relationship between displacement due to vibration, cutting force, flank wear, and surface roughness has been examined.展开更多
Control performance monitoring has attracted great attention in both academia and industry over the past two decades. However, most research efforts have been devoted to the performance monitoring of linear control sy...Control performance monitoring has attracted great attention in both academia and industry over the past two decades. However, most research efforts have been devoted to the performance monitoring of linear control systems, without considering the pervasive nonlinearities(e.g. valve stiction) present in most industrial control systems. In this work, a novel probability distribution distance based index is proposed to monitor the performance of non-linear control systems. The proposed method uses Hellinger distance to evaluate change of control system performance. Several simulation examples are given to illustrate the effectiveness of the proposed method.展开更多
Rapid prototyping,real-time control and monitoring of various events in robots are crucial requirements for research in the fields of modular and swarm robotics.A large quantities of resources(time,man power,infrastru...Rapid prototyping,real-time control and monitoring of various events in robots are crucial requirements for research in the fields of modular and swarm robotics.A large quantities of resources(time,man power,infrastructure,etc.)are often invested in programming,interfacing the sensors,debugging the response to algorithms during prototyping and operational phases of a robot development cycle.The cost of developing an optimal infrastructure to efficiently address such control and monitoring requirements increases significantly in the presence of mobile robots.Though numerous solutions have been developed for minimizing the resources spent on hardware prototyping and algorithm validation in both static and mobile scenarios,it can be observed that researchers have either chosen methodologies that conflict with the power and infrastructure constraints of the research field or generated constrained solutions whose applications are restricted to the field itself.This paper develops a solution for addressing the challenges in controlling heterogeneous mobile robots.A platform named Quanta-a cost effective,energy efficient and high-speed wireless infrastructure is prototyped as a part of the research in the field of modular robotics.Quanta is capable of controlling and monitoring various events in/using a robot with the help of a light-weight communication protocol independent of the robot hardware architecture(s).展开更多
Mine or longwall panel layout is a 3D structure with highly non-uniform stress distribution. Recognition of such fact will facilitate underground problem identification/investigation and solving by numerical modeling ...Mine or longwall panel layout is a 3D structure with highly non-uniform stress distribution. Recognition of such fact will facilitate underground problem identification/investigation and solving by numerical modeling through proper model construction. Due to its versatility, numerical modeling is the most popular method for ground control design and problem solving. However numerical modeling results require highly experienced professionals to interpret its validity/applicability to actual mining operations due to complicated mining and geological conditions. Underground ground control monitoring is routinely performed to predict roof behavior such as weighting and weighting interval without matching observation of face mining condition while the mining pressures are being monitored, resulting in unrealistic interpretation of the obtained data on mining pressure. The importance of ground control pressure monitoring and simultaneous observation of mining and geological conditions is illustrated by an example of shield leg pressure monitoring and interpretation in an U.S. longwall coal mine: it was found that the roof strata act like a plate, not an individual block of the size of a shield dimension, as commonly assumed by all researchers and shield capacity is not a fixed property for a longwall panel or a mine or a coal seam. A new mechanism on the interaction between shield's hydraulic leg pressure and roof strata for shield loading is proposed.展开更多
Profile monitoring is used to check the stability of the quality of a product over time when the product quality is best represented by a function at each time point.However,most previous monitoring approaches have no...Profile monitoring is used to check the stability of the quality of a product over time when the product quality is best represented by a function at each time point.However,most previous monitoring approaches have not considered that the argument values may vary from profile to profile,which is common in practice.A novel nonparametric control scheme based on profile error is proposed for monitoring nonlinear profiles with varied argument values.The proposed scheme uses the metrics of profile error as the statistics to construct the control charts.More details about the design of this nonparametric scheme are also discussed.The monitoring performance of the combined control scheme is compared with that of alternative nonparametric methods via simulation.Simulation studies show that the combined scheme is effective in detecting parameter error and is sensitive to small shifts in the process.In addition,due to the properties of the charting statistics,the out-of-control signal can provide diagnostic information for the users.Finally,the implementation steps of the proposed monitoring scheme are given and applied for monitoring the blade manufacturing process.With the application in blade manufacturing of aircraft engines,the proposed nonparametric control scheme is effective,interpretable,and easy to apply.展开更多
According to the characteristics of the ther-motechnical parameters such as temperature pressure and glass level for glass melting furnace, the design method for monitoring and controlling these parameters is introduc...According to the characteristics of the ther-motechnical parameters such as temperature pressure and glass level for glass melting furnace, the design method for monitoring and controlling these parameters is introduced in this paper based on MACROMAX-2 concentrated and dis-tributedcontrol system. The configuration of management information and control loop is described, and research tests were performed to check the functions of system.展开更多
The relationships and the features of integration between Enterprise ProcessMonitoring and Controlling System(EPMCS)and Enterprise Process Related Applications(EPRA)wereanalyzed.An integration architecture centered on...The relationships and the features of integration between Enterprise ProcessMonitoring and Controlling System(EPMCS)and Enterprise Process Related Applications(EPRA)wereanalyzed.An integration architecture centered on EPMCS was presented,in which there were fourlayers to connect from EPMCS to EPRA:EPMCS,application integration layer,transport layer andEPRA,and there were four layers used to etstablish integration:presentation layer,function layer,data layer and system layer.The frameworks to connect EPMCS and EPRA were designed,thatEnterprise-Independent Model(EIM),Enterprise-Specific Model(ESM)and meta-model to describe thesetwo models were defined.The method to integrate data based on XML was designed to exchange datafrom EPMCS to EPRA according to the mapping between EIM and ESM.The approches are suitable forintegrating EPMCS and systems in Product Data Management(PDM),project management and enterprisebusiness management.展开更多
High performance control of an interactive process such as iron and steel plant relies on ability to honor safety and operational constraints;reduce the standard deviations of variables that need to be controlled(e.g....High performance control of an interactive process such as iron and steel plant relies on ability to honor safety and operational constraints;reduce the standard deviations of variables that need to be controlled(e.g.product quantity,quality );de-bottlenecking the process;and,maximize profitability or lower cost(e.g.energy savings, improve hot metal content).These objectives may be prioritized in this order,but can vary and are very difficult to achieve optimally through conventional control.A multivariable predictive controller solution,along with its extensive inferential sensor and built-in optimizer,provides online closed loop control and optimization for many interactive metal and mining processes to lower the energy cost,increase throughput,and optimize product quality and yield. Control loop performance is also a key factor to improve iron and steel plant automation and operation result; Honeywell CPM offers vender-independent product which provides monitoring,tuning,modeling of control loop and sustainable loop performance analysis and maintenance solution towards operation stability and energy saving.展开更多
After systematic monitoring and field survey in orchard for three years from 2009 to 2011, it was found that Bactrocera dorsalis occurred for more than three generations each year on the north shore of the middle and ...After systematic monitoring and field survey in orchard for three years from 2009 to 2011, it was found that Bactrocera dorsalis occurred for more than three generations each year on the north shore of the middle and lower reaches of Yangtze River, with overlapping generations; the activity peak of adults was from mid August to late September; the occurrence in citrus orchard in hilly and mountainous area was severe; the average insect-fruit rate in October reached 0.20% - 15.88% ; B. dorsalis had sporadic occurrence in other orchards. The integrated control measures of plowing in winter to kill pupae, removing insect-fruits, boycott- ing on the ground, trapping by sex attraetants and spraying pesticides could basically control the damage of B. dorsalis.展开更多
基金supported in part by the National Natural Science Foundation of China(62125306)Zhejiang Key Research and Development Project(2024C01163)the State Key Laboratory of Industrial Control Technology,China(ICT2024A06)
文摘In recent decades,control performance monitoring(CPM)has experienced remarkable progress in research and industrial applications.While CPM research has been investigated using various benchmarks,the historical data benchmark(HIS)has garnered the most attention due to its practicality and effectiveness.However,existing CPM reviews usually focus on the theoretical benchmark,and there is a lack of an in-depth review that thoroughly explores HIS-based methods.In this article,a comprehensive overview of HIS-based CPM is provided.First,we provide a novel static-dynamic perspective on data-level manifestations of control performance underlying typical controller capacities including regulation and servo:static and dynamic properties.The static property portrays time-independent variability in system output,and the dynamic property describes temporal behavior driven by closed-loop feedback.Accordingly,existing HIS-based CPM approaches and their intrinsic motivations are classified and analyzed from these two perspectives.Specifically,two mainstream solutions for CPM methods are summarized,including static analysis and dynamic analysis,which match data-driven techniques with actual controlling behavior.Furthermore,this paper also points out various opportunities and challenges faced in CPM for modern industry and provides promising directions in the context of artificial intelligence for inspiring future research.
文摘This article focuses on the current computer monitoring and control as the research direction,studying the application strategies of artificial intelligence and big data technology in this field.It includes an introduction to artificial intelligence and big data technology,the application strategies of artificial intelligence and big data technology in computer hardware,software,and network monitoring,as well as the application strategies of artificial intelligence and big data technology in computer process,access,and network control.This analysis aims to serve as a reference for the application of artificial intelligence and big data technology in computer monitoring and control,ultimately enhancing the security of computer systems.
基金Project (No. 2005C22060) supported by the Science and Technology Department of Zhejiang Province, China
文摘With the rapid development of wireless technologies, it is possible for Chinese greenhouses to be equipped with wireless sensor networks due to their low-cost, simplicity and mobility. In the current study, we compared the advantages of ZigBee with other two similar wireless networking protocols, Wi-Fi and Bluetooth, and proposed a wireless solution for green- house monitoring and control system based on ZigBee technology. As an explorative application of ZigBee technology in Chinese greenhouse, it may promote Chinese protected agriculture.
基金Supported by the National High-Tech Development Program of China(No.863-511-920-011,2001AA411230).
文摘Multivariate statistical process monitoring and control (MSPM&C) methods for chemical process monitoring with statistical projection techniques such as principal component analysis (PCA) and partial least squares (PLS) are surveyed in this paper. The four-step procedure of performing MSPM&C for chemical process, modeling of processes, detecting abnormal events or faults, identifying the variable(s) responsible for the faults and diagnosing the source cause for the abnormal behavior, is analyzed. Several main research directions of MSPM&C reported in the literature are discussed, such as multi-way principal component analysis (MPCA) for batch process, statistical monitoring and control for nonlinear process, dynamic PCA and dynamic PLS, and on-line quality control by inferential models. Industrial applications of MSPM&C to several typical chemical processes, such as chemical reactor, distillation column, polymerization process, petroleum refinery units, are summarized. Finally, some concluding remarks and future considerations are made.
文摘This paper describes a hierarchical architecture and a high-performance and interoperability protocol for centralized monitoring and controlling systems (CMCS) . The protocol we proposed can interoperate different monitoring and controlling systems constructed by different companies, each with different functions and communication protocols. The protocol reduces the amount of traffic and has real-time and high-perfor-mance advantages. The protocol was implemented in CMCS for telecommunication power supply and air-condi-tioner used by the Telecommunication Bureau of Zhejiang Province. This paper deals with the hierarchical architecture and function of CMCS and packet format, command ID, and SDL description of its protocol. We also discuss the properties of the interoperability and performance of the protocol in this paper.
文摘Deformation can directly reflect the working behavior of the dam,so determining the deformation monitoring control value can effectively monitor the safety of dam operation.The traditional dam deformation monitoring control value only considers the single measuring point.In order to overcome the limitation,this paper presents a new method to determine the monitoring control value for concrete gravity dam based on the deformations of multi-measuring points.A dam’s comprehensive deformation displacement is determined by the measured values at different measuring points on the positive inverted vertical line and the corresponding weight of eachmeasuring point.The projection pursuit method(PPM)combined with the grey wolf optimization(GWO)algorithm is used to determine the weight of each measuring point according to the spatial correlation distribution characteristics of dam deformation.The peaks over threshold(POT)model based on the extreme value theory is adopted to determine the monitoring control value with the obtained dam comprehensive deformation displacement.In addition,the POTmodel is improved with the automatic threshold determinationmethod based on the 3σcriterion in probability theory and the GWO algorithm,which can avoid subjectivity and randomness in determining the threshold.The results of the engineering application show the feasibility and applicability of the proposed method.
基金Project(51074051)supported by the National Natural Science Foundation of China
文摘The performance of Smith prediction monitoring automatic gauge control(AGC) system is influenced by model mismatching greatly in strip rolling process. Aiming at this problem, a feedback-assisted iterative learning control strategy, which learned unknown modeling error by using previous control information repeatedly, was introduced into Smith prediction monitoring AGC system. Firstly, conventional Smith predictor and improved Smith predictor with PI-P controller were analyzed. Secondly, on the basis of establishing of feedback-assisted iterative learning control strategy for improved Smith predictor, process control signal update law and control error were deduced, then convergence condition of this strategy was put forward and proved. Finally, after modeling the automatic position control system, the PI-P Smith prediction monitoring AGC system with feedback-assisted iterative learning control was researched through simulation. Simulation results indicate that this system remains stable during model mismatching. The robustness and response of monitoring AGC is improved by development of feedback-assisted iterative learning control strategy for PI-P Smith predictor.
基金Sponsored by the National High Technology Research and Development Program(Grant No.2012AA02A604)
文摘This paper presents a multi-interface embedded server architecture for remote real-time monitoring system and distributed monitoring applications. In the scheme,an embedded microprocessor( LPC3250 from NXP) is chosen as the CPU of the embedded server with a linux operation system( OS) environment. The embedded server provides multiple interfaces for supporting various application scenarios. The whole network is based on local area network and adopts the Browser / Server( B / S) model. The monitoring and control node is as a browser endpoint and the remote node with an embedded server is as a server endpoint. Users can easily acquire various sensors information through writing Internet protocol address of remote node on the computer browser. Compared with client / server( C / S) mode,B / S model needs less maintain and can be applicable to large user group. In addition,a simple network management protocol( SNMP) is used for management of devices in Internet protocol( IP) networks. The results of the demonstration experiment show that the proposed system gives good support to manage the network from different user terminals and allows the users to better interact with the ambient environment.
基金sponsored by National Natural Science Foundation of China(50975020)National Major Program of Science and Tech-nique(2009ZX04014-101)Funding Project for Academic Human Resources Development in Institutions of Higher Learning under the Jurisdiction of Beijing Municipalipality(PHR20090518)
文摘In view of characteristics of solar photovoltaic (PV) power station such as the decentralized layout and massive monitoring and control information, a solar PV power generation monitoring and control system has been designed. The system is designed into three layers namely the sensor and actuator layer, the PLC field monitoring and control layer and the remote network monitoring and control layer. Through ZigBee wireless network, PROFIBUS and GPRS wireless network, the system makes the three layers exchange information rapidly, and the system supervises not only various operational parameters of the power generating system but also weather changes as a way to change the solar tracking strategy of the PV power generating system and reduce the operating energy consumption of the system. Through the hardware redundant design of PLC central controller and the upper computer, the solar PV power station can be more secure and reliable when running.
文摘In this work, an adaptive control constraint system has been developed for computer numerical control （CNC） turning based on the feedback control and adaptive control/self-tuning control. In an adaptive controlled system, the signals from the online measurement have to be processed and fed back to the machine tool controller to adjust the cutting parameters so that the machining can be stopped once a certain threshold is crossed. The main focus of the present work is to develop a reliable adaptive control system, and the objective of the control system is to control the cutting parameters and maintain the displacement and tool flank wear under constraint valves for a particular workpiece and tool combination as per ISO standard. Using Matlab Simulink, the digital adaption of the cutting parameters for experiment has confirmed the efficiency of the adaptively controlled condition monitoring system, which is reflected in different machining processes at varying machining conditions. This work describes the state of the art of the adaptive control constraint （ACC） machining systems for turning. AIS14140 steel of 150 BHN hardness is used as the workpiece material, and carbide inserts are used as cutting tool material throughout the experiment. With the developed approach, it is possible to predict the tool condition pretty accurately, if the feed and surface roughness are measured at identical conditions. As part of the present research work, the relationship between displacement due to vibration, cutting force, flank wear, and surface roughness has been examined.
基金Supported by the National Natural Science Foundation of China(61134007,61203157)the National Science Fund for Outstanding Young Scholars(61222303)+1 种基金the Fundamental Research Funds for the Central Universities(22A20151405)Shanghai R&D Platform Construction Program(13DZ2295300)
文摘Control performance monitoring has attracted great attention in both academia and industry over the past two decades. However, most research efforts have been devoted to the performance monitoring of linear control systems, without considering the pervasive nonlinearities(e.g. valve stiction) present in most industrial control systems. In this work, a novel probability distribution distance based index is proposed to monitor the performance of non-linear control systems. The proposed method uses Hellinger distance to evaluate change of control system performance. Several simulation examples are given to illustrate the effectiveness of the proposed method.
文摘Rapid prototyping,real-time control and monitoring of various events in robots are crucial requirements for research in the fields of modular and swarm robotics.A large quantities of resources(time,man power,infrastructure,etc.)are often invested in programming,interfacing the sensors,debugging the response to algorithms during prototyping and operational phases of a robot development cycle.The cost of developing an optimal infrastructure to efficiently address such control and monitoring requirements increases significantly in the presence of mobile robots.Though numerous solutions have been developed for minimizing the resources spent on hardware prototyping and algorithm validation in both static and mobile scenarios,it can be observed that researchers have either chosen methodologies that conflict with the power and infrastructure constraints of the research field or generated constrained solutions whose applications are restricted to the field itself.This paper develops a solution for addressing the challenges in controlling heterogeneous mobile robots.A platform named Quanta-a cost effective,energy efficient and high-speed wireless infrastructure is prototyped as a part of the research in the field of modular robotics.Quanta is capable of controlling and monitoring various events in/using a robot with the help of a light-weight communication protocol independent of the robot hardware architecture(s).
基金supported by the National Natural Science Foundation of China (Nos. 51604267 and 51704095)
文摘Mine or longwall panel layout is a 3D structure with highly non-uniform stress distribution. Recognition of such fact will facilitate underground problem identification/investigation and solving by numerical modeling through proper model construction. Due to its versatility, numerical modeling is the most popular method for ground control design and problem solving. However numerical modeling results require highly experienced professionals to interpret its validity/applicability to actual mining operations due to complicated mining and geological conditions. Underground ground control monitoring is routinely performed to predict roof behavior such as weighting and weighting interval without matching observation of face mining condition while the mining pressures are being monitored, resulting in unrealistic interpretation of the obtained data on mining pressure. The importance of ground control pressure monitoring and simultaneous observation of mining and geological conditions is illustrated by an example of shield leg pressure monitoring and interpretation in an U.S. longwall coal mine: it was found that the roof strata act like a plate, not an individual block of the size of a shield dimension, as commonly assumed by all researchers and shield capacity is not a fixed property for a longwall panel or a mine or a coal seam. A new mechanism on the interaction between shield's hydraulic leg pressure and roof strata for shield loading is proposed.
基金supported by National Natural Science Foundation of China (Grant No. 70931004,Grant No. 70802043)
文摘Profile monitoring is used to check the stability of the quality of a product over time when the product quality is best represented by a function at each time point.However,most previous monitoring approaches have not considered that the argument values may vary from profile to profile,which is common in practice.A novel nonparametric control scheme based on profile error is proposed for monitoring nonlinear profiles with varied argument values.The proposed scheme uses the metrics of profile error as the statistics to construct the control charts.More details about the design of this nonparametric scheme are also discussed.The monitoring performance of the combined control scheme is compared with that of alternative nonparametric methods via simulation.Simulation studies show that the combined scheme is effective in detecting parameter error and is sensitive to small shifts in the process.In addition,due to the properties of the charting statistics,the out-of-control signal can provide diagnostic information for the users.Finally,the implementation steps of the proposed monitoring scheme are given and applied for monitoring the blade manufacturing process.With the application in blade manufacturing of aircraft engines,the proposed nonparametric control scheme is effective,interpretable,and easy to apply.
文摘According to the characteristics of the ther-motechnical parameters such as temperature pressure and glass level for glass melting furnace, the design method for monitoring and controlling these parameters is introduced in this paper based on MACROMAX-2 concentrated and dis-tributedcontrol system. The configuration of management information and control loop is described, and research tests were performed to check the functions of system.
基金the National Aviation Science Foundation of China(02E51007,03F51063)
文摘The relationships and the features of integration between Enterprise ProcessMonitoring and Controlling System(EPMCS)and Enterprise Process Related Applications(EPRA)wereanalyzed.An integration architecture centered on EPMCS was presented,in which there were fourlayers to connect from EPMCS to EPRA:EPMCS,application integration layer,transport layer andEPRA,and there were four layers used to etstablish integration:presentation layer,function layer,data layer and system layer.The frameworks to connect EPMCS and EPRA were designed,thatEnterprise-Independent Model(EIM),Enterprise-Specific Model(ESM)and meta-model to describe thesetwo models were defined.The method to integrate data based on XML was designed to exchange datafrom EPMCS to EPRA according to the mapping between EIM and ESM.The approches are suitable forintegrating EPMCS and systems in Product Data Management(PDM),project management and enterprisebusiness management.
文摘High performance control of an interactive process such as iron and steel plant relies on ability to honor safety and operational constraints;reduce the standard deviations of variables that need to be controlled(e.g.product quantity,quality );de-bottlenecking the process;and,maximize profitability or lower cost(e.g.energy savings, improve hot metal content).These objectives may be prioritized in this order,but can vary and are very difficult to achieve optimally through conventional control.A multivariable predictive controller solution,along with its extensive inferential sensor and built-in optimizer,provides online closed loop control and optimization for many interactive metal and mining processes to lower the energy cost,increase throughput,and optimize product quality and yield. Control loop performance is also a key factor to improve iron and steel plant automation and operation result; Honeywell CPM offers vender-independent product which provides monitoring,tuning,modeling of control loop and sustainable loop performance analysis and maintenance solution towards operation stability and energy saving.
基金Supported by Science and Technology Project of Science and Technology Department of Anhui Province in 2009"Research Topic on Bactrocera dorsalis"(09020303037)
文摘After systematic monitoring and field survey in orchard for three years from 2009 to 2011, it was found that Bactrocera dorsalis occurred for more than three generations each year on the north shore of the middle and lower reaches of Yangtze River, with overlapping generations; the activity peak of adults was from mid August to late September; the occurrence in citrus orchard in hilly and mountainous area was severe; the average insect-fruit rate in October reached 0.20% - 15.88% ; B. dorsalis had sporadic occurrence in other orchards. The integrated control measures of plowing in winter to kill pupae, removing insect-fruits, boycott- ing on the ground, trapping by sex attraetants and spraying pesticides could basically control the damage of B. dorsalis.
基金Supported by National Basic Research Program of China（973 Program）（2013CB035500） National Natural Science Foundation of China（61233004,61221003,61074061）+1 种基金 International Cooperation Program of Shanghai Science and Technology Commission （12230709600） the Higher Education Research Fund for the Doctoral Program of China（20120073130006）
