A procedure is proposed whereby input and hysteretic energy spectra developed for single-degree-of-freedom （SDOF） systems are applied to multi-degree-of-freedom （MDOF） steel moment resisting frames. The proposed p...A procedure is proposed whereby input and hysteretic energy spectra developed for single-degree-of-freedom （SDOF） systems are applied to multi-degree-of-freedom （MDOF） steel moment resisting frames. The proposed procedure is verified using four frames, viz., frame with three-, five-, seven- and nine-stories, each of which is subjected to the fault- normal and fault-parallel components of three actual earthquakes. A very good estimate for the three- and five-story frames, and a reasonably acceptable estimate for the seven-, and nine-story frames, have been obtained. A method for distributing the hysteretic energy over the frame height is also proposed. This distribution scheme allows for the determination of the energy demand component of a proposed energy-based seismic design （EBSD） procedure for each story. To address the capacity component of EBSD, a story-wise optimization design procedure is developed by utilizing the energy dissipating capacity from plastic hinge formation/rotation for these moment frames. The proposed EBSD procedure is demonstrated in the design of a three-story one-bay steel moment frame.展开更多
This study investigates the efficiency of two types of rehabilitation methods based on economic justification that can lead to logical decision making between the retrofitting schemes. Among various rehabilitation met...This study investigates the efficiency of two types of rehabilitation methods based on economic justification that can lead to logical decision making between the retrofitting schemes. Among various rehabilitation methods, concentric chevron bracing（CCB） and cylindrical friction damper（CFD） were selected. The performance assessment procedure of the frames is divided into two distinct phases. First, the limit state probabilities of the structures before and after rehabilitation are investigated. In the second phase, the seismic risk of structures in terms of life safety and financial losses（decision variables） using the recently published FEMA P58 methodology is evaluated. The results show that the proposed retrofitting methods improve the serviceability and life safety performance levels of steel and RC structures at different rates when subjected to earthquake loads. Moreover, these procedures reveal that financial losses are greatly decreased, and were more tangible by the application of CFD rather than using CCB. Although using both retrofitting methods reduced damage state probabilities, incorporation of a site-specific seismic hazard curve to evaluate mean annual occurrence frequency at the collapse prevention limit state caused unexpected results to be obtained. Contrary to CFD, the collapse probability of the structures retrofitted with CCB increased when compared with the primary structures.展开更多
Based on performance-based seismic engineering, this paper proposes an optimal seismic retrofit model for steel moment resisting frames（SMRFs） to generate a retrofit scheme at minimal cost. To satisfy the acceptance...Based on performance-based seismic engineering, this paper proposes an optimal seismic retrofit model for steel moment resisting frames（SMRFs） to generate a retrofit scheme at minimal cost. To satisfy the acceptance criteria for the Basic Safety Objective（BSO） specified in FEMA 356, the minimum number of upgraded connections and their locations in an SMRF with brittle connections are determined by evolutionary computation. The performance of the proposed optimal retrofitting model is evaluated on the basis of the energy dissipation capacities, peak roof drift ratios, and maximum interstory drift ratios of structures before and after retrofitting. In addition, a retrofit efficiency index, which is defined as the ratio of the increment in seismic performance to the required retrofitting cost, is proposed to examine the efficiencies of the retrofit schemes derived from the model. The optimal seismic retrofit model is applied to the SAC benchmark examples for threestory and nine-story SMRFs with brittle connections. Using the retrofit efficiency index proposed in this study, the optimal retrofit schemes obtained from the model are found to be efficient for both examples in terms of energy dissipation capacity, roof drift ratio, and maximum inter-story drift ratio.展开更多
This study investigates the seismic design factors for three reinforced concrete （RC） framed buildings with 4, 16 and 32-stories in Dubai, UAE utilizing nonlinear analysis. The buildings are designed according to th...This study investigates the seismic design factors for three reinforced concrete （RC） framed buildings with 4, 16 and 32-stories in Dubai, UAE utilizing nonlinear analysis. The buildings are designed according to the response spectrum procedure defined in the 2009 International Building Code （IBC＇09）. Two ensembles of ground motion records with 10% and 2% probability of exceedance in 50 years （10/50 and 2/50, respectively） are used. The nonlinear dynamic resPonses to the earthquake records are computed using IDARC-2D. Key seismic design parameters are evaluated; namely, response modification factor （R）, deflection amplification factor （Cd）, system overstrength factor （Ωo）, and response modification factor for ductility （Rd） in addition to inelastic interstory drift. The evaluated seismic design factors are found to significantly depend on the considered ground motion （10/50 versus 2/50）. Consequently, resolution to the controversy of Dubai seismicity is urged. The seismic design factors for the 2/50 records show an increase over their counterparts for the 10/50 records in the range of 200%-400%, except for the D~ factor, which shows a mere 30% increase. Based on the observed trends, perioddependent R and Cd factors are recommended if consistent collapse probability （or collapse prevention performance） in moment frames with varying heights is to be expected.展开更多
Traditionally,nonlinear time history analysis(NLTHA)is used to assess the performance of structures under fu-ture hazards which is necessary to develop effective disaster risk management strategies.However,this method...Traditionally,nonlinear time history analysis(NLTHA)is used to assess the performance of structures under fu-ture hazards which is necessary to develop effective disaster risk management strategies.However,this method is computationally intensive and not suitable for analyzing a large number of structures on a city-wide scale.Surrogate models offer an efficient and reliable alternative and facilitate evaluating the performance of multiple structures under different hazard scenarios.However,creating a comprehensive database for surrogate mod-elling at the city level presents challenges.To overcome this,the present study proposes meta databases and a general framework for surrogate modelling of steel structures.The dataset includes 30,000 steel moment-resisting frame buildings,representing low-rise,mid-rise and high-rise buildings,with criteria for connections,beams,and columns.Pushover analysis is performed and structural parameters are extracted,and finally,incorporating two different machine learning algorithms,random forest and Shapley additive explanations,sensitivity and explain-ability analyses of the structural parameters are performed to identify the most significant factors in designing steel moment resisting frames.The framework and databases can be used as a validated source of surrogate modelling of steel frame structures in order for disaster risk management.展开更多
Soil underneath a structure might affect the behavior and the overall response of the structure in seismic events. The role of loose soil conditions and the inclusion of soil-structure interaction (SSI) in the analysi...Soil underneath a structure might affect the behavior and the overall response of the structure in seismic events. The role of loose soil conditions and the inclusion of soil-structure interaction (SSI) in the analysis are important issues that need to be addressed. Since steel structures are light, two configurations designed as spatial and perimeter are considered to study the effect of soil on the steel structural frames for the same building. The paper provides a parametric analysis on the influence of SSI on the overall performance of MRFs (Moment Resisting Frames) according to the provisions of Saudi Building Code (SBC) [1]. A case study has been developed in which spatial and perimeter moment resisting frames of 12, 6 and 3 stories residential buildings are designed using Saudi Building Code (SBC) prescriptions. A modal response spectrum analysis has been carried out to see the influence of SSI on the fundamental period of vibration, top story displacement and inter-story drift limitations. Moreover, a static non-linear analysis has been performed to investigate the performance of frames, thus allowing to identify the influence of SSI on the structural design of steel MRFs.展开更多
A new remedy is proposed in this study to increase the ductility of cross-braced frames to a level comparable with ductile moment frames.The suggested system consists of one or two concentric steel rings installed in ...A new remedy is proposed in this study to increase the ductility of cross-braced frames to a level comparable with ductile moment frames.The suggested system consists of one or two concentric steel rings installed in the cross-braced bay vertically.The steel rings are designed such that they fail in bending sooner than failure of the braces in compression.Then the rings act as seismic fuses with multiple bending plastic hinges.Using nonlinear static analysis,it is shown that the proposed system can be designed to behave like cross-braced frames with regard to stiffness and strength,and like special moment frames with regard to ductility.Seismic design factors for the proposed system are recommended based on nonlinear pushover and cyclic analysis studies.展开更多
针对合作靶标特征点成像在大跨度动态测量中的特征提取精度下降、实时性不足问题,提出了一种融合帧间运动预测与改进亚像素边缘检测的自适应光斑质心提取方法。基于合作靶标测量运动连贯性特性,构建了动态感兴趣区域(Region of Interest...针对合作靶标特征点成像在大跨度动态测量中的特征提取精度下降、实时性不足问题,提出了一种融合帧间运动预测与改进亚像素边缘检测的自适应光斑质心提取方法。基于合作靶标测量运动连贯性特性,构建了动态感兴趣区域(Region of Interest,ROI)特征参数模型,以帧间运动预测实现ROI的快速定位,结合大律法阈值优化策略实现自适应Canny边缘检测,在提升计算效率的同时有效解决了不同测量距离下的降噪问题。然后,采用多方向Sobel算子与强度斜坡改进的Zernike矩相结合改进了边缘点定位算法,并基于高斯牛顿迭代改进鲁棒最小二乘圆拟合法,实现质心坐标计算。实验结果表明:在仿真测试中,本方法在不同噪声水平下的质心定位误差为0.001~0.025像素;实际测试中,ROI预测算法可满足加速度8.75 m/s^(2)以内的测量场景需求,10~30 m测量距离内的光斑重复性定位误差稳定在0.016~0.040像素,优于传统方法;光斑提取速度提升约75.5%,显著增强了系统的实时处理能力。本研究可为合作靶标的测量应用提供有效技术保障。展开更多
The control using piezoelectric smart moment (PSM) controllers for seismically excited structures was studied.The radical principle of PSM controller was introduced firstly and then the different formulae of control s...The control using piezoelectric smart moment (PSM) controllers for seismically excited structures was studied.The radical principle of PSM controller was introduced firstly and then the different formulae of control shear force for different structures were derived with the stiffness ratio of columns taken into consideration.With the active control algorithm based on the theory of modern optimal control,this study proposes a simulative computation on the frame structure and mill structure respectively,and the results indicate that the installation of this smart controller with proper parameters can significantly reduce seismic responses of different structures. The optimal parameters of the damper can be identified through a parameter study.展开更多
This study is focused on?nonlinear analysis and design of?spatial and perimeter moment resisting frames for a 9-storeys?office building?having?9.15?m span.?Seismic?design criteria of Eurocode 8?Ductility Class High (D...This study is focused on?nonlinear analysis and design of?spatial and perimeter moment resisting frames for a 9-storeys?office building?having?9.15?m span.?Seismic?design criteria of Eurocode 8?Ductility Class High (DCH)?with behavior factor (q) of 6.5 and AISC/ASCE code,?Special Moment resisting Frame (SMF) with response modification factor (R) of 8 were employed.?The design outcomes?are?expressed in terms of frame performance?(non-linear analysis), section profiles?(code recommendations), strength-demand to capacity ratios, drift-demand to capacity?ratios and structural weight. The consequences of the research compare?two codes in term of weights and design performances.?This will aid professional engineers and researchers to select effective design criteria and capacity design rules?efficiently.展开更多
文摘A procedure is proposed whereby input and hysteretic energy spectra developed for single-degree-of-freedom （SDOF） systems are applied to multi-degree-of-freedom （MDOF） steel moment resisting frames. The proposed procedure is verified using four frames, viz., frame with three-, five-, seven- and nine-stories, each of which is subjected to the fault- normal and fault-parallel components of three actual earthquakes. A very good estimate for the three- and five-story frames, and a reasonably acceptable estimate for the seven-, and nine-story frames, have been obtained. A method for distributing the hysteretic energy over the frame height is also proposed. This distribution scheme allows for the determination of the energy demand component of a proposed energy-based seismic design （EBSD） procedure for each story. To address the capacity component of EBSD, a story-wise optimization design procedure is developed by utilizing the energy dissipating capacity from plastic hinge formation/rotation for these moment frames. The proposed EBSD procedure is demonstrated in the design of a three-story one-bay steel moment frame.
文摘This study investigates the efficiency of two types of rehabilitation methods based on economic justification that can lead to logical decision making between the retrofitting schemes. Among various rehabilitation methods, concentric chevron bracing（CCB） and cylindrical friction damper（CFD） were selected. The performance assessment procedure of the frames is divided into two distinct phases. First, the limit state probabilities of the structures before and after rehabilitation are investigated. In the second phase, the seismic risk of structures in terms of life safety and financial losses（decision variables） using the recently published FEMA P58 methodology is evaluated. The results show that the proposed retrofitting methods improve the serviceability and life safety performance levels of steel and RC structures at different rates when subjected to earthquake loads. Moreover, these procedures reveal that financial losses are greatly decreased, and were more tangible by the application of CFD rather than using CCB. Although using both retrofitting methods reduced damage state probabilities, incorporation of a site-specific seismic hazard curve to evaluate mean annual occurrence frequency at the collapse prevention limit state caused unexpected results to be obtained. Contrary to CFD, the collapse probability of the structures retrofitted with CCB increased when compared with the primary structures.
基金National Research Foundation of Korea(NRF)under Grant No.2016R1A6A3A11932881
文摘Based on performance-based seismic engineering, this paper proposes an optimal seismic retrofit model for steel moment resisting frames（SMRFs） to generate a retrofit scheme at minimal cost. To satisfy the acceptance criteria for the Basic Safety Objective（BSO） specified in FEMA 356, the minimum number of upgraded connections and their locations in an SMRF with brittle connections are determined by evolutionary computation. The performance of the proposed optimal retrofitting model is evaluated on the basis of the energy dissipation capacities, peak roof drift ratios, and maximum interstory drift ratios of structures before and after retrofitting. In addition, a retrofit efficiency index, which is defined as the ratio of the increment in seismic performance to the required retrofitting cost, is proposed to examine the efficiencies of the retrofit schemes derived from the model. The optimal seismic retrofit model is applied to the SAC benchmark examples for threestory and nine-story SMRFs with brittle connections. Using the retrofit efficiency index proposed in this study, the optimal retrofit schemes obtained from the model are found to be efficient for both examples in terms of energy dissipation capacity, roof drift ratio, and maximum inter-story drift ratio.
文摘This study investigates the seismic design factors for three reinforced concrete （RC） framed buildings with 4, 16 and 32-stories in Dubai, UAE utilizing nonlinear analysis. The buildings are designed according to the response spectrum procedure defined in the 2009 International Building Code （IBC＇09）. Two ensembles of ground motion records with 10% and 2% probability of exceedance in 50 years （10/50 and 2/50, respectively） are used. The nonlinear dynamic resPonses to the earthquake records are computed using IDARC-2D. Key seismic design parameters are evaluated; namely, response modification factor （R）, deflection amplification factor （Cd）, system overstrength factor （Ωo）, and response modification factor for ductility （Rd） in addition to inelastic interstory drift. The evaluated seismic design factors are found to significantly depend on the considered ground motion （10/50 versus 2/50）. Consequently, resolution to the controversy of Dubai seismicity is urged. The seismic design factors for the 2/50 records show an increase over their counterparts for the 10/50 records in the range of 200%-400%, except for the D~ factor, which shows a mere 30% increase. Based on the observed trends, perioddependent R and Cd factors are recommended if consistent collapse probability （or collapse prevention performance） in moment frames with varying heights is to be expected.
基金financial support from Teesside University to support the Ph.D.programme of the first author.
文摘Traditionally,nonlinear time history analysis(NLTHA)is used to assess the performance of structures under fu-ture hazards which is necessary to develop effective disaster risk management strategies.However,this method is computationally intensive and not suitable for analyzing a large number of structures on a city-wide scale.Surrogate models offer an efficient and reliable alternative and facilitate evaluating the performance of multiple structures under different hazard scenarios.However,creating a comprehensive database for surrogate mod-elling at the city level presents challenges.To overcome this,the present study proposes meta databases and a general framework for surrogate modelling of steel structures.The dataset includes 30,000 steel moment-resisting frame buildings,representing low-rise,mid-rise and high-rise buildings,with criteria for connections,beams,and columns.Pushover analysis is performed and structural parameters are extracted,and finally,incorporating two different machine learning algorithms,random forest and Shapley additive explanations,sensitivity and explain-ability analyses of the structural parameters are performed to identify the most significant factors in designing steel moment resisting frames.The framework and databases can be used as a validated source of surrogate modelling of steel frame structures in order for disaster risk management.
文摘Soil underneath a structure might affect the behavior and the overall response of the structure in seismic events. The role of loose soil conditions and the inclusion of soil-structure interaction (SSI) in the analysis are important issues that need to be addressed. Since steel structures are light, two configurations designed as spatial and perimeter are considered to study the effect of soil on the steel structural frames for the same building. The paper provides a parametric analysis on the influence of SSI on the overall performance of MRFs (Moment Resisting Frames) according to the provisions of Saudi Building Code (SBC) [1]. A case study has been developed in which spatial and perimeter moment resisting frames of 12, 6 and 3 stories residential buildings are designed using Saudi Building Code (SBC) prescriptions. A modal response spectrum analysis has been carried out to see the influence of SSI on the fundamental period of vibration, top story displacement and inter-story drift limitations. Moreover, a static non-linear analysis has been performed to investigate the performance of frames, thus allowing to identify the influence of SSI on the structural design of steel MRFs.
文摘A new remedy is proposed in this study to increase the ductility of cross-braced frames to a level comparable with ductile moment frames.The suggested system consists of one or two concentric steel rings installed in the cross-braced bay vertically.The steel rings are designed such that they fail in bending sooner than failure of the braces in compression.Then the rings act as seismic fuses with multiple bending plastic hinges.Using nonlinear static analysis,it is shown that the proposed system can be designed to behave like cross-braced frames with regard to stiffness and strength,and like special moment frames with regard to ductility.Seismic design factors for the proposed system are recommended based on nonlinear pushover and cyclic analysis studies.
文摘针对合作靶标特征点成像在大跨度动态测量中的特征提取精度下降、实时性不足问题,提出了一种融合帧间运动预测与改进亚像素边缘检测的自适应光斑质心提取方法。基于合作靶标测量运动连贯性特性,构建了动态感兴趣区域(Region of Interest,ROI)特征参数模型,以帧间运动预测实现ROI的快速定位,结合大律法阈值优化策略实现自适应Canny边缘检测,在提升计算效率的同时有效解决了不同测量距离下的降噪问题。然后,采用多方向Sobel算子与强度斜坡改进的Zernike矩相结合改进了边缘点定位算法,并基于高斯牛顿迭代改进鲁棒最小二乘圆拟合法,实现质心坐标计算。实验结果表明:在仿真测试中,本方法在不同噪声水平下的质心定位误差为0.001~0.025像素;实际测试中,ROI预测算法可满足加速度8.75 m/s^(2)以内的测量场景需求,10~30 m测量距离内的光斑重复性定位误差稳定在0.016~0.040像素,优于传统方法;光斑提取速度提升约75.5%,显著增强了系统的实时处理能力。本研究可为合作靶标的测量应用提供有效技术保障。
基金FundedbytheNationalNaturalScienceFoundationofChi na (No .5 0 0 380 1 0 )
文摘The control using piezoelectric smart moment (PSM) controllers for seismically excited structures was studied.The radical principle of PSM controller was introduced firstly and then the different formulae of control shear force for different structures were derived with the stiffness ratio of columns taken into consideration.With the active control algorithm based on the theory of modern optimal control,this study proposes a simulative computation on the frame structure and mill structure respectively,and the results indicate that the installation of this smart controller with proper parameters can significantly reduce seismic responses of different structures. The optimal parameters of the damper can be identified through a parameter study.
文摘This study is focused on?nonlinear analysis and design of?spatial and perimeter moment resisting frames for a 9-storeys?office building?having?9.15?m span.?Seismic?design criteria of Eurocode 8?Ductility Class High (DCH)?with behavior factor (q) of 6.5 and AISC/ASCE code,?Special Moment resisting Frame (SMF) with response modification factor (R) of 8 were employed.?The design outcomes?are?expressed in terms of frame performance?(non-linear analysis), section profiles?(code recommendations), strength-demand to capacity ratios, drift-demand to capacity?ratios and structural weight. The consequences of the research compare?two codes in term of weights and design performances.?This will aid professional engineers and researchers to select effective design criteria and capacity design rules?efficiently.
