As a typical bioflavonoid,diosmetin is desirable in the field of natural medicine,healthy food,and cosmetics by anti-cancer,antibacterial,antioxidant,estrogen-like and anti-inflammatory activities,and it comes from a ...As a typical bioflavonoid,diosmetin is desirable in the field of natural medicine,healthy food,and cosmetics by anti-cancer,antibacterial,antioxidant,estrogen-like and anti-inflammatory activities,and it comes from a wide range of sources in traditional Chinese medicine like spider fragrance,spearmint and chrysanthemum,as well as in Citrus fruit.However,traditional analytical methods such as silica gel column chromatography face multiple challenges in the selective extraction of diosmetin from biological materials and traditional Chinese medicinal materials.Therefore,it is urgent to develop a new type of absorbent with high efficiency,recyclability and good specificity to diosmetin.In this investigation,a magnetic surface molecularly imprinted polymer(labeled as Diosmetin/SMIPs)was synthesized employing magnetic nanoparticles as the carrier and 4-vinylpyridinyl(4-VP)as the functional monomer by surface imprinting technology.The functional monomer was screened by the binding energy(△E)between functional monomers and template molecules via computational simulation.The Diosmetin/SMIPs had a high level of specific recognition and adsorption capability towards diosmetin with a 20.25 mg g^(-1) adsorption capacity and an imprinting factor(IF)of 2.28.Additionally,it demonstrated excellent regeneration performance with 8 adsorption/desorption cycles.In addition,91.20%-94.16% of spiked diosmetin was recovered from the lemon peel samples.The strategy of constructing Diosmetin/SMIPs based on computational simulation can effectively enhance the specific adsorption performance of diosmetin.Meanwhile,Diosmetin/SMIPs synthesized by imprinting polymerization showed excellent anti-interference and reusability,and realized efficient targeted extraction of diosmetin from lemon peel samples.The results of this investigation provide a promising adsorbent for selective enrichment of diosmetin from Citrus fruit and complicated materials.展开更多
In this work,by combining the specific selectivity of molecularly imprinted polymer(MIP)with a simple and sensitive electrochemiluminescence(ECL)detection method,a molecularly imprinted ECL sensor for kanamycin(KA)was...In this work,by combining the specific selectivity of molecularly imprinted polymer(MIP)with a simple and sensitive electrochemiluminescence(ECL)detection method,a molecularly imprinted ECL sensor for kanamycin(KA)was developed.The MIP film was synthesized on the surface of gold electrode via electrochemical polymerization,using pyrrole(PY)as the functional monomer and KA as the template molecule.The commonly used luminescent reagent Ru(bpy)32+was employed as the ECL probe,and its co-reagent tripropylamine(TPA)was added to enhance the detection sensitivity of the sensor.Quantitative analysis of KA was performed by evaluating the difference in ECL responses between MIP film electrodes after KA removal and KA rebinding.The sensor exhibited high selectivity,good reproducibility,and stability toward KA,with a linear range of 5.00×10^(-8) to 1.00×10^(-5) mol·L^(-1) and a limit of detection of 1.67×10^(-8) mol·L^(-1)(S/N=3).This work would provide a new idea for the development of simple and sensitive molecularly imprinted ECL sensors.展开更多
Molecularly imprinted polymers(MIPs)are a kind of synthetic receptors possessing wide application prospects in proteins recognition.However,there are still great challenges in proteins imprinting due to their large si...Molecularly imprinted polymers(MIPs)are a kind of synthetic receptors possessing wide application prospects in proteins recognition.However,there are still great challenges in proteins imprinting due to their large size and easy conformation change.In this study,we explored epitope-oriented MIP based on host-vip interaction(hg-MIP)and constructed a novel hg-MIP-SERS(surface-enhanced Raman scatting)approach for efficiently recognizing the terminal epitopes of neuron-specific enolase(NSE),a well-known disease biomarker for small cell lung cancer,neuroblstom,and Alzheimer's disease.The C-and N-terminal epitopes of NSE were modified with 4-(phenylazo)benzoic acid,then they were used as the templates and immobilized onβ-cyclodextrin-functionalized substrates.The imprinted layer was formed by polymerization of various functional monomers.Combined with SERS detection,an antibody-free sandwich assay based on hg-MIP was successfully used to detect the concentration of NSE in human serums,with the advantages of simple operation,small sample volume(5μL),wide linear range(1–10^(4)ng/m L)and a limit of detection as low as 0.01 ng/m L.The developed epitope-oriented hg-MIP-SERS approach can also be extended to other proteins,expanding the imprinting method of proteins,and has a broad development space in the field of protein separation and detection.展开更多
A pre-treatment methodology for clenbuterol hydrochloride （CLEN） isolation and enrichment in a complex matrix environment was developed through exploiting molecularly imprinted polymers （MIPs）. CLEN-imprinted pol-...A pre-treatment methodology for clenbuterol hydrochloride （CLEN） isolation and enrichment in a complex matrix environment was developed through exploiting molecularly imprinted polymers （MIPs）. CLEN-imprinted pol- ymers were synthesized by the combined use of ally-β-cyclodextrin （ally-13-CD） and methacrylic acid （MAA）, allyl-β-CD and acrylonitrile （AN）, and allyl-β-CD and methyl methacrylate （MMA） as the binary functional monomers. MAA-linked allyl-β-CD MIPs （M-MAA） were characterized by Fourier transform-infrared （FT-IR） spectroscopy and a scanning electron microscope （SEM）. Based upon the results, M-MAA polymers generally proved to be an excellent selective extraction compared to its references： AN-linked allyl-β-CD MIPs （M-AN） and MMA-linked allyl-β-CD MIPs （M-MMA）. M-MAA polymers were eventually chosen to run through a molecularly imprinted solid-phase extraction （MISPE） micro-column to enrich CLEN residues spiked in pig livers. A high recovery was achieved, ranging from 91.03% to 96.76% with relative standard deviation （RSD） ≤4.45%.展开更多
Dummy molecularly imprinted polymers （DMIPs） for 4-（methylnitrosamino）-1-（3-pyridyl）-1-butanol （NNAL） were produced using three structural analogues as dummy template molecules. The chosen analogues were 4-（a...Dummy molecularly imprinted polymers （DMIPs） for 4-（methylnitrosamino）-1-（3-pyridyl）-1-butanol （NNAL） were produced using three structural analogues as dummy template molecules. The chosen analogues were 4-（acetymethylamino）-1-（3-pyridyl）-butanol, 4- （methylamino）-1-（3-pyridyl）-1-butanol, and 1-（3-pyridyl）-1,4,-butanediol. The molecular recognition characteristics of the produced polymers were evaluated by X-ray photoelec- tron spectroscopy （XPS） and Fourier transform infrared spectroscopy （FT-IR）. Interactions between NNAL and methacrylic acid should be cooperative hydrogen bonds while the ni- trogen atom of the pyridine ring and the oxygen atom of the nitroso group in NNAL are two of the hydrogen-bond acceptors. It was further demonstrated that DMIP synthesized by 4-（acetymethylamino）-1-（3-pyridyl）-butanol had the best binding performance by XPS and FT-IR. Then dummy molecularly imprinted solid phase extraction （DMISPE） was developed for the determination of the analyte using the hit polymer as the sorbing material. Under optimal conditions, the recovery of NNAL dissolved in standard solution reached 93%. And the investigated polymer exhibited much higher binding of NNAL when nicotine was acted as the competitive molecule. Also the proposed method was applied to the measurement of NNAL spiked in blank urine samples with recoveries ranging from 87.2% to 101.2%.展开更多
A simple and effective method for surface molecularly imprinted composite membranes （MICMs） for artemisinin （Ars） based on regenerated cellulose membranes was first prepared through surface- initiated atom transfe...A simple and effective method for surface molecularly imprinted composite membranes （MICMs） for artemisinin （Ars） based on regenerated cellulose membranes was first prepared through surface- initiated atom transfer radical polymerization （ATRP）, and the as-prepared MICMs were then evaluated as adsorbents for selective recognition and separation of Ars molecules. Batch rebinding studies were conducted to determine the specific adsorption equilibrium, kinetics and selective permeation performance. The adsorption capacity of MICMs toward Ars by the Langmuir isotherm model was 2.008 mgg-1, which was nearly 5.0 times higher than non-molecularly imprinted composite membranes （NICMs）. The kinetic property of MICMs was well-fitted by the pseudo-second-order rate equation. The selective permeation experiments were successfully investigated to prove the excellent selective permeation performance for Ars than the competitive analog （artemether）.展开更多
Chinese herbal medicines(CHMs)play an increasingly important role in the field of medicine and affects public health in the world.Although more and more strict has been employed to ensure the quality and safety of CHM...Chinese herbal medicines(CHMs)play an increasingly important role in the field of medicine and affects public health in the world.Although more and more strict has been employed to ensure the quality and safety of CHMs,pesticide residues in CHMs remain a serious issue and are the bottleneck for the global development of CHMs.In this work,we applied molecularly imprinted membrane electrospray mass spectrometry(MIM-ESI MS)for rapid detecting 4 classes of pesticide residues in CHMs,including organophosphorus(OPP),carbamates,pyrethroids and neonicotinoids in CHMs.Compared with our previous ambient ionization method MESI,MIM-ESI is capable of achieving a~50-fold increase in the detection limit of conventional analytical methods owing to the specificity recognition and unique enrichment of MIM.The optimal experimental conditions were determined,and the method was further validated for its sensitivity and specificity.Our data showed that MIM-ESI MS is applicable for the direct quantitation of pesticide residues in CHMs.This detection technology may help to ensure the quality of CHMs in the future.展开更多
Synthetic materials that can specifically recognize proteins will find wide application in many fields.In this report,bovine serum albumin was chosen as the template protein.Acrylamide and N,N＇-methylenebisacrylamide...Synthetic materials that can specifically recognize proteins will find wide application in many fields.In this report,bovine serum albumin was chosen as the template protein.Acrylamide and N,N＇-methylenebisacrylamide were employed as the functional and cross-linker monomers,respectively.Molecularly imprinted macroporous monolithic materials that can preferentially bind the template protein in an aqueous environment were prepared by combination of molecular imprinting technique and freezing/thawing preparation method.The resulted imprinted macroporous monolithic columns were evaluated by utilizing as stationary phase in high performance liquid chromatography and solid-phase extraction materials.The experimental results indicated that the imprinted macroporous monolithic column exhibited good recognition for template protein,as compared with the control protein（hemoglobin）,whereas the non-imprinted polymer（prepared under the same conditions except without addition template protein） had no selective properties.展开更多
Surface molecularly imprinted polymers （SMIPs） for selective adsorption of ampicillin sodium were synthesized using surface molecular imprinting technique with silica gel as a support. The physical and morphological...Surface molecularly imprinted polymers （SMIPs） for selective adsorption of ampicillin sodium were synthesized using surface molecular imprinting technique with silica gel as a support. The physical and morphological characteristics of the polymers were investigated by scanning electron microscope （SEM）, Fourier transform infrared spectroscopy （FT-IR）, thermogravimetric analysis （TGA）, elemental analysis and nitrogen adsorption-desorption test. The obtained results showed that the SMIPs displayed great adsorption capacity （13.5 lag/mg）, high recognition ability （the imprinted factor is 3.2） and good binding kinetics for ampicillin sodium. Finally, as solid phase extraction adsorbents, the SMIPs coupled with HPLC method were validated and applied for the enrichment, purification and determination of anapicillin sodium in real milk and blood samples. The averages of spiked accuracy ranged from 92.1% to 107.6%. The relative standard deviations of intra- and inter-day precisions were less than 4.6%. This study provides a new and promising method for enriching, extracting and determining ampicillin sodium in complex biological samples.展开更多
Urinary 8-hydroxy-2 -deoxyguanosine(8-OHdG) is an excellent marker of oxidative DNA damage.In this study,employing guanosine as dummy template a novel molecularly imprinted(MIP) monolithic capillary column had been sy...Urinary 8-hydroxy-2 -deoxyguanosine(8-OHdG) is an excellent marker of oxidative DNA damage.In this study,employing guanosine as dummy template a novel molecularly imprinted(MIP) monolithic capillary column had been synthesized,and that was used as medium of in-tube solid phase microextraction(SPME).Coupled with capillary electrophoresis-electrochemical detection(CE-ECD),the system of extraction and detection of 8-OHdG in urinary sample had been developed.Because of its greater phase ratio combined with conv...展开更多
An electrochemical sensor for doxycycline hyclate(DC)detection with high sensitivity and good selectivity is reported.The sensor was fabricated by electro-polymerization of molecularly imprinted polymers(MIPs)in the p...An electrochemical sensor for doxycycline hyclate(DC)detection with high sensitivity and good selectivity is reported.The sensor was fabricated by electro-polymerization of molecularly imprinted polymers(MIPs)in the presence of DC onto multi-walled carbon nanotubes modified glassy carbon electrode(MWCNTs/GCE).The MWCNTs can significantly increase the current response of the sensor,leading to enhanced sensitivity.The MIPs provide selective recognition sites for DC detection.The experimental parameters,such as the polymer monomer concentration,supporting electrolyte pH,the time for electro-polymerization and the incubation time of the sensor with DC were optimized.Under optimized experimental conditions,the sensor displayed a linear range of 0.05μmol/L-0.5μmol/L towards DC detection,with the detection limit of 1.3×10^-2μmol/L.The sensor was successfully applied for recovery test of DC in human serum samples.展开更多
Hydrophilic molecularly imprinted polymers（MIPs） were prepared using tetracycline as template,methacrylic acid as monomer and glycidilmethacrylate as pro-hydrophilic co-monomer.Compared with common MIPs,the imprinti...Hydrophilic molecularly imprinted polymers（MIPs） were prepared using tetracycline as template,methacrylic acid as monomer and glycidilmethacrylate as pro-hydrophilic co-monomer.Compared with common MIPs,the imprinting effect and adsorption amounts of hydrophilic MIPs for tetracycline（TC） were greatly improved in water media.Furthermore,the electrochemical sensor fabricated by modifying hydrophilic MIPs on glassy carbon electrode was developed for the determination of TC in foodstuff samples.展开更多
A novel molecularly imprinted polymer (MIP) based on upconversion nanoparticles (UCNPs) was successfully synthesized for determination of Ochratoxin A (OTA). The MIP was developed on the silica-coated UCNPs using N-(1...A novel molecularly imprinted polymer (MIP) based on upconversion nanoparticles (UCNPs) was successfully synthesized for determination of Ochratoxin A (OTA). The MIP was developed on the silica-coated UCNPs using N-(1-hydroxy-2-naphthoyl amido)-(L)-phenylalanine (HNA-Phe) as the alternative template. The final composite combined the advantages of the high selectivity of MIP with the high fluorescence intensity of UCNPs which was selective and sensitive to OTA. Under the optimal condition, the fluorescence intensity of UCNPs@SiO2@MIP decreases linearly when the concentration of OTA increases from 0.05 to 1.0 mg/L. The detection limit of OTA with the method was 0.031 mg/L. At three spiked concentration levels (50, 100 and 200 μg/kg), the recovery ranges of OTA in corn, rice and feed are 88.0%–91.6%, 80.2%–91.6% and 89.2%–90.4%, respectively.展开更多
High selective molecularly imprinted polymers （MIPs） for tetracycline have been prepared by precipitation polymerization. Effects of monomer and solvent, the ratio of monomer and template and the characterization of...High selective molecularly imprinted polymers （MIPs） for tetracycline have been prepared by precipitation polymerization. Effects of monomer and solvent, the ratio of monomer and template and the characterization of the polymer were investigated by frontal chromatography and selectivity experiment. The results clearly indicated that the polymer, which had the highest molecular recognition abilities for tetracycline antibiotics, had been received.展开更多
A novel method to prepare surface plasmon resonance（SPR） sensor chips based on grafted imprinted polymer is explored. Benzophenone photografting system is used to grow molecularly imprinted polymer（MIP） films from...A novel method to prepare surface plasmon resonance（SPR） sensor chips based on grafted imprinted polymer is explored. Benzophenone photografting system is used to grow molecularly imprinted polymer（MIP） films from the modified surface of gold substrate.The surface morphology and thickness of MIP films were investigated by scanning electronic microscope（SEM）.The adsorption properties of sensor chip were studied by SPR spectroscopy.The results demonstrate that nano-MIP films can be constructed on the surface of gold substrate with the good adsorption of template molecules.展开更多
Discriminating sterile inflammation from infection, especially in cases of aseptic loosening versus an actual prosthetic joint infection, is challenging and has significant treatment implications. Our goal was to eval...Discriminating sterile inflammation from infection, especially in cases of aseptic loosening versus an actual prosthetic joint infection, is challenging and has significant treatment implications. Our goal was to evaluate a novel human monoclonal antibody（mAb） probe directed against the Gram-positive bacterial surface molecule lipoteichoic acid（LTA）. Specificity and affinity were assessed in vitro. We then radiolabeled the anti-LTA mAb and evaluated its effectiveness as a diagnostic imaging tool for detecting infection via immuno PET imaging in an in vivo mouse model of prosthetic joint infection（PJI）. In vitro and ex vivo binding of the anti-LTA mAb to pathogenic bacteria was measured with Octet, ELISA, and flow cytometry. The in vivo PJI mouse model was assessed using traditional imaging modalities, including positron emission tomography（PET） with [^（18）F]FDG and [^（18）F]Na F as well as X-ray computed tomography（CT）, before being evaluated with the zirconium-89-labeled antibody specific for LTA（[^（89）Zr]SAC55）.The anti-LTA mAb exhibited specific binding in vitro to LTA-expressing bacteria. Results from imaging showed that our model could reliably simulate infection at the surgical site by bioluminescent imaging, conventional PET tracer imaging, and bone morphological changes by CT. One day following injection of both the radiolabeled anti-LTA and isotype control antibodies, the anti-LTA antibody demonstrated significantly greater（P 〈 0.05） uptake at S. aureus-infected prosthesis sites over either the same antibody at sterile prosthesis sites or of control non-specific antibody at infected prosthesis sites. Taken together, the radiolabeled anti-LTA mAb, [^（89）Zr]SAC55, may serve as a valuable diagnostic molecular imaging probe to help distinguish between sterile inflammation and infection in the setting of PJI. Future studies are needed to determine whether these findings will translate to human PJI.展开更多
Fluorescent nanoparticles have good chemical stability and photostability,controllable optical properties and larger stokes shift.In light of their designability and functionability,the fluorescent nanoparticles are w...Fluorescent nanoparticles have good chemical stability and photostability,controllable optical properties and larger stokes shift.In light of their designability and functionability,the fluorescent nanoparticles are widely used as the fluorescent probes for diverse applications.To enhance the sensitivity and selectivity,the combination of the fluorescent nanoparticles with the molecularly imprinted polymer,i.e.molecularly imprinted fluorescent nanoparticles(MIFN),was an effective way.The sensor based on MIFN(the MIFN sensor)could be more compatible with the complex sample matrix,which was especially widely adopted in medical and biological analysis.In this mini-review,the construction method,detective mechanism and types of MIFN sensors are elaborated.The current applications of MIFN sensors in pharmaceutical analysis,including pesticides/herbicide,veterinary drugs/drugs residues and human related proteins,are highlighted based on the literature in the recent three years.Finally,the research prospect and development trend of the MIFN sensor are forecasted.展开更多
A rapid, simple and selective method based on molecularly imprinted, spin column extraction coupled with fluorescence detection was successfully established for the determination of 2,4-dinitrophenol in serum samples....A rapid, simple and selective method based on molecularly imprinted, spin column extraction coupled with fluorescence detection was successfully established for the determination of 2,4-dinitrophenol in serum samples. The 2,4-dinitrophenol imprinted polymers exhibited highly selective recognition for the template molecule and the maximum adsorption capacity was 138.9 mg/g. The results indicated that when water is used as the loading solution, only 2,4-dinitrophenol could be adsorbed on the spin column without the remaining structural analogs（2-nitrophenol, 4-nitrophenol and phenol）. After eluting with acetonitrile/acetic acid（9/1, v/v）, 2,4-dinitrophenol in serum samples could be determined by using the fluorescence spectrometer, based on the fluorescence enhancement of fluorescein by the template molecule. Under the optimal conditions, the spiked recovery ranged from 95.8% to 103.4% and the detection limit was 1 nmol/L. The results confirmed the reliability and practicality of the protocol and revealed a good perspective of this method for biological sample analysis.展开更多
An S-naproxen（S-NAP）molecularly imprinted monolithic stationary phase（MIMSP）with specific recognition for S-NAP and naproxen（NAP）was prepared by in situ technique,utilizing 4-vinylpridine（4-VP）as a function mo...An S-naproxen（S-NAP）molecularly imprinted monolithic stationary phase（MIMSP）with specific recognition for S-NAP and naproxen（NAP）was prepared by in situ technique,utilizing 4-vinylpridine（4-VP）as a function monomer,ethylene glycol dimethacrylate（EDMA）as a cross-linking agent,and low-polar solvents（toluene and dodecanol）as porogenic solvents.The selectivity of the polymers for S-NAP and NAP was evaluated by high performance liquid chromatography（HPLC）.The binding characteristics were tested by Scatchard analysis.Racemic NAP could be specifically separated to some extent.At the same time,NAP could be separated from ibuprofen under optimized conditions.Scatchard analysis showed that two classes of binding sites existed in the S-NAP-imprinted polymers,with their dissociation constants estimated to be 1.045 and 5.496 μM,respectively.The results demonstrate that S-NAP and NAP can be recognized specifically on the obtained MIMSP.展开更多
Molecularly imprinted polymers （MIPs） were prepared by the bulk polymerization using crystal violet as the template molecule, and the methacrylic acid and ethylene glycol dimetheacrylate as functional monomer and cr...Molecularly imprinted polymers （MIPs） were prepared by the bulk polymerization using crystal violet as the template molecule, and the methacrylic acid and ethylene glycol dimetheacrylate as functional monomer and cross-linker, respectively. Sys- tematic investigations of synthetic conditions were conducted. The surface morphology and recognition mechanism of the obtained polymers were studied using scanning electron microscope and spectrophotometric analysis. MIPs showed high atTmity to template molecule and were successfully applied as special solid-phase extraction sorbent for selective extraction of crystal violet from natural seawater. An off-line molecularly imprinted solid-phase extraction （MISPE） method followed by high-performance liquid chroma- tography with diodearray detection for the analysis of crystal violet was also established. MISPE columns have good recoveries for crystal violet standard solutions and good linearity was obtained over the concentration range of 0-200 ~tg L-1 （R2 〉 0.99）. Finally, two natural seawater samples were investigated. The recoveries of spiked seawater on the MISPE columns were from 44.47% to 62.34%, the relative standard deviation （n=3） being in the range of 2.89%-5.96%.展开更多
基金supported by the National Natural Science Foundation of China(Nos.32301259,32101228,32271527 and 32371536)the“Pioneer”and“Leading Goose”R&D Program of Zhejiang(Nos.2022C02023 and 2023C02015)+1 种基金the Research Foundation of Talented Scholars of Zhejiang A&F University(No.2021LFR058)the Dean-ship of Scientific Research at Northern Border University,Arar,KSA for funding this research work through the project number“NBU-FPEJ-2024-177-01”.
文摘As a typical bioflavonoid,diosmetin is desirable in the field of natural medicine,healthy food,and cosmetics by anti-cancer,antibacterial,antioxidant,estrogen-like and anti-inflammatory activities,and it comes from a wide range of sources in traditional Chinese medicine like spider fragrance,spearmint and chrysanthemum,as well as in Citrus fruit.However,traditional analytical methods such as silica gel column chromatography face multiple challenges in the selective extraction of diosmetin from biological materials and traditional Chinese medicinal materials.Therefore,it is urgent to develop a new type of absorbent with high efficiency,recyclability and good specificity to diosmetin.In this investigation,a magnetic surface molecularly imprinted polymer(labeled as Diosmetin/SMIPs)was synthesized employing magnetic nanoparticles as the carrier and 4-vinylpyridinyl(4-VP)as the functional monomer by surface imprinting technology.The functional monomer was screened by the binding energy(△E)between functional monomers and template molecules via computational simulation.The Diosmetin/SMIPs had a high level of specific recognition and adsorption capability towards diosmetin with a 20.25 mg g^(-1) adsorption capacity and an imprinting factor(IF)of 2.28.Additionally,it demonstrated excellent regeneration performance with 8 adsorption/desorption cycles.In addition,91.20%-94.16% of spiked diosmetin was recovered from the lemon peel samples.The strategy of constructing Diosmetin/SMIPs based on computational simulation can effectively enhance the specific adsorption performance of diosmetin.Meanwhile,Diosmetin/SMIPs synthesized by imprinting polymerization showed excellent anti-interference and reusability,and realized efficient targeted extraction of diosmetin from lemon peel samples.The results of this investigation provide a promising adsorbent for selective enrichment of diosmetin from Citrus fruit and complicated materials.
文摘In this work,by combining the specific selectivity of molecularly imprinted polymer(MIP)with a simple and sensitive electrochemiluminescence(ECL)detection method,a molecularly imprinted ECL sensor for kanamycin(KA)was developed.The MIP film was synthesized on the surface of gold electrode via electrochemical polymerization,using pyrrole(PY)as the functional monomer and KA as the template molecule.The commonly used luminescent reagent Ru(bpy)32+was employed as the ECL probe,and its co-reagent tripropylamine(TPA)was added to enhance the detection sensitivity of the sensor.Quantitative analysis of KA was performed by evaluating the difference in ECL responses between MIP film electrodes after KA removal and KA rebinding.The sensor exhibited high selectivity,good reproducibility,and stability toward KA,with a linear range of 5.00×10^(-8) to 1.00×10^(-5) mol·L^(-1) and a limit of detection of 1.67×10^(-8) mol·L^(-1)(S/N=3).This work would provide a new idea for the development of simple and sensitive molecularly imprinted ECL sensors.
基金supported by Open Project of State Key Laboratory of Supramolecular Structure and Materials,Jilin University,China(No.sklssm2024018)。
文摘Molecularly imprinted polymers(MIPs)are a kind of synthetic receptors possessing wide application prospects in proteins recognition.However,there are still great challenges in proteins imprinting due to their large size and easy conformation change.In this study,we explored epitope-oriented MIP based on host-vip interaction(hg-MIP)and constructed a novel hg-MIP-SERS(surface-enhanced Raman scatting)approach for efficiently recognizing the terminal epitopes of neuron-specific enolase(NSE),a well-known disease biomarker for small cell lung cancer,neuroblstom,and Alzheimer's disease.The C-and N-terminal epitopes of NSE were modified with 4-(phenylazo)benzoic acid,then they were used as the templates and immobilized onβ-cyclodextrin-functionalized substrates.The imprinted layer was formed by polymerization of various functional monomers.Combined with SERS detection,an antibody-free sandwich assay based on hg-MIP was successfully used to detect the concentration of NSE in human serums,with the advantages of simple operation,small sample volume(5μL),wide linear range(1–10^(4)ng/m L)and a limit of detection as low as 0.01 ng/m L.The developed epitope-oriented hg-MIP-SERS approach can also be extended to other proteins,expanding the imprinting method of proteins,and has a broad development space in the field of protein separation and detection.
基金Project supported by the Department of Science and Technology of Zhejiang Province(No.2013C02022-2/01),China
文摘A pre-treatment methodology for clenbuterol hydrochloride （CLEN） isolation and enrichment in a complex matrix environment was developed through exploiting molecularly imprinted polymers （MIPs）. CLEN-imprinted pol- ymers were synthesized by the combined use of ally-β-cyclodextrin （ally-13-CD） and methacrylic acid （MAA）, allyl-β-CD and acrylonitrile （AN）, and allyl-β-CD and methyl methacrylate （MMA） as the binary functional monomers. MAA-linked allyl-β-CD MIPs （M-MAA） were characterized by Fourier transform-infrared （FT-IR） spectroscopy and a scanning electron microscope （SEM）. Based upon the results, M-MAA polymers generally proved to be an excellent selective extraction compared to its references： AN-linked allyl-β-CD MIPs （M-AN） and MMA-linked allyl-β-CD MIPs （M-MMA）. M-MAA polymers were eventually chosen to run through a molecularly imprinted solid-phase extraction （MISPE） micro-column to enrich CLEN residues spiked in pig livers. A high recovery was achieved, ranging from 91.03% to 96.76% with relative standard deviation （RSD） ≤4.45%.
文摘Dummy molecularly imprinted polymers （DMIPs） for 4-（methylnitrosamino）-1-（3-pyridyl）-1-butanol （NNAL） were produced using three structural analogues as dummy template molecules. The chosen analogues were 4-（acetymethylamino）-1-（3-pyridyl）-butanol, 4- （methylamino）-1-（3-pyridyl）-1-butanol, and 1-（3-pyridyl）-1,4,-butanediol. The molecular recognition characteristics of the produced polymers were evaluated by X-ray photoelec- tron spectroscopy （XPS） and Fourier transform infrared spectroscopy （FT-IR）. Interactions between NNAL and methacrylic acid should be cooperative hydrogen bonds while the ni- trogen atom of the pyridine ring and the oxygen atom of the nitroso group in NNAL are two of the hydrogen-bond acceptors. It was further demonstrated that DMIP synthesized by 4-（acetymethylamino）-1-（3-pyridyl）-butanol had the best binding performance by XPS and FT-IR. Then dummy molecularly imprinted solid phase extraction （DMISPE） was developed for the determination of the analyte using the hit polymer as the sorbing material. Under optimal conditions, the recovery of NNAL dissolved in standard solution reached 93%. And the investigated polymer exhibited much higher binding of NNAL when nicotine was acted as the competitive molecule. Also the proposed method was applied to the measurement of NNAL spiked in blank urine samples with recoveries ranging from 87.2% to 101.2%.
基金financially supported by the National Natural Science Foundation of China(Nos.21077046,21107037,21176107,21174057,2100403,21207051)National key basic research development program(973 Program,No. 2012CBB21500)+2 种基金Ph.D.Programs Foundation of Ministry of Education of China(No.20123227120015)Natural Science Foundation of Jiangsu Province(Nos.BK2011461,SBK2011459, BK2011514)China Postdoctoral Science Foundation funded project(Nos.2012M511220,2013M530240)
文摘A simple and effective method for surface molecularly imprinted composite membranes （MICMs） for artemisinin （Ars） based on regenerated cellulose membranes was first prepared through surface- initiated atom transfer radical polymerization （ATRP）, and the as-prepared MICMs were then evaluated as adsorbents for selective recognition and separation of Ars molecules. Batch rebinding studies were conducted to determine the specific adsorption equilibrium, kinetics and selective permeation performance. The adsorption capacity of MICMs toward Ars by the Langmuir isotherm model was 2.008 mgg-1, which was nearly 5.0 times higher than non-molecularly imprinted composite membranes （NICMs）. The kinetic property of MICMs was well-fitted by the pseudo-second-order rate equation. The selective permeation experiments were successfully investigated to prove the excellent selective permeation performance for Ars than the competitive analog （artemether）.
基金supported by the National Natural Science Foundation of China(No.82072247)to MZthe Young Scholar Project of Beijing University of Chinese Medicine(Nos.2019-JYBJS-017 and 2021-JYB-XJSJJ001)to SJ and MZ。
文摘Chinese herbal medicines(CHMs)play an increasingly important role in the field of medicine and affects public health in the world.Although more and more strict has been employed to ensure the quality and safety of CHMs,pesticide residues in CHMs remain a serious issue and are the bottleneck for the global development of CHMs.In this work,we applied molecularly imprinted membrane electrospray mass spectrometry(MIM-ESI MS)for rapid detecting 4 classes of pesticide residues in CHMs,including organophosphorus(OPP),carbamates,pyrethroids and neonicotinoids in CHMs.Compared with our previous ambient ionization method MESI,MIM-ESI is capable of achieving a~50-fold increase in the detection limit of conventional analytical methods owing to the specificity recognition and unique enrichment of MIM.The optimal experimental conditions were determined,and the method was further validated for its sensitivity and specificity.Our data showed that MIM-ESI MS is applicable for the direct quantitation of pesticide residues in CHMs.This detection technology may help to ensure the quality of CHMs in the future.
基金supported by the National Natural Science Foundation of China(Nos21075089 and 20605024)Talents Fund of Tianjin University of Science and Technology(No20090424)
文摘Synthetic materials that can specifically recognize proteins will find wide application in many fields.In this report,bovine serum albumin was chosen as the template protein.Acrylamide and N,N＇-methylenebisacrylamide were employed as the functional and cross-linker monomers,respectively.Molecularly imprinted macroporous monolithic materials that can preferentially bind the template protein in an aqueous environment were prepared by combination of molecular imprinting technique and freezing/thawing preparation method.The resulted imprinted macroporous monolithic columns were evaluated by utilizing as stationary phase in high performance liquid chromatography and solid-phase extraction materials.The experimental results indicated that the imprinted macroporous monolithic column exhibited good recognition for template protein,as compared with the control protein（hemoglobin）,whereas the non-imprinted polymer（prepared under the same conditions except without addition template protein） had no selective properties.
基金financially supported by the National Natural Science Foundation of China (Nos. 81573391 and 81173024)the National Key Projects of China (No. 812277802)
文摘Surface molecularly imprinted polymers （SMIPs） for selective adsorption of ampicillin sodium were synthesized using surface molecular imprinting technique with silica gel as a support. The physical and morphological characteristics of the polymers were investigated by scanning electron microscope （SEM）, Fourier transform infrared spectroscopy （FT-IR）, thermogravimetric analysis （TGA）, elemental analysis and nitrogen adsorption-desorption test. The obtained results showed that the SMIPs displayed great adsorption capacity （13.5 lag/mg）, high recognition ability （the imprinted factor is 3.2） and good binding kinetics for ampicillin sodium. Finally, as solid phase extraction adsorbents, the SMIPs coupled with HPLC method were validated and applied for the enrichment, purification and determination of anapicillin sodium in real milk and blood samples. The averages of spiked accuracy ranged from 92.1% to 107.6%. The relative standard deviations of intra- and inter-day precisions were less than 4.6%. This study provides a new and promising method for enriching, extracting and determining ampicillin sodium in complex biological samples.
基金the support of the National Natural Science Foundation of China(No.20575051).
文摘Urinary 8-hydroxy-2 -deoxyguanosine(8-OHdG) is an excellent marker of oxidative DNA damage.In this study,employing guanosine as dummy template a novel molecularly imprinted(MIP) monolithic capillary column had been synthesized,and that was used as medium of in-tube solid phase microextraction(SPME).Coupled with capillary electrophoresis-electrochemical detection(CE-ECD),the system of extraction and detection of 8-OHdG in urinary sample had been developed.Because of its greater phase ratio combined with conv...
基金financially supported by the National Natural Science Foundation of China (No.21575165)
文摘An electrochemical sensor for doxycycline hyclate(DC)detection with high sensitivity and good selectivity is reported.The sensor was fabricated by electro-polymerization of molecularly imprinted polymers(MIPs)in the presence of DC onto multi-walled carbon nanotubes modified glassy carbon electrode(MWCNTs/GCE).The MWCNTs can significantly increase the current response of the sensor,leading to enhanced sensitivity.The MIPs provide selective recognition sites for DC detection.The experimental parameters,such as the polymer monomer concentration,supporting electrolyte pH,the time for electro-polymerization and the incubation time of the sensor with DC were optimized.Under optimized experimental conditions,the sensor displayed a linear range of 0.05μmol/L-0.5μmol/L towards DC detection,with the detection limit of 1.3×10^-2μmol/L.The sensor was successfully applied for recovery test of DC in human serum samples.
基金financed by the Entry-Exit Inspection and Quarantine Bureau of PRC(Nos.2006IK152,2009IK 130 and 200910085)
文摘Hydrophilic molecularly imprinted polymers（MIPs） were prepared using tetracycline as template,methacrylic acid as monomer and glycidilmethacrylate as pro-hydrophilic co-monomer.Compared with common MIPs,the imprinting effect and adsorption amounts of hydrophilic MIPs for tetracycline（TC） were greatly improved in water media.Furthermore,the electrochemical sensor fabricated by modifying hydrophilic MIPs on glassy carbon electrode was developed for the determination of TC in foodstuff samples.
基金Project(17ZYPTJC00050)supported by Science and Technology Committee of Tianjin,ChinaProject(2017YFC1600803)supported by the Ministry of Science and Technology of China
文摘A novel molecularly imprinted polymer (MIP) based on upconversion nanoparticles (UCNPs) was successfully synthesized for determination of Ochratoxin A (OTA). The MIP was developed on the silica-coated UCNPs using N-(1-hydroxy-2-naphthoyl amido)-(L)-phenylalanine (HNA-Phe) as the alternative template. The final composite combined the advantages of the high selectivity of MIP with the high fluorescence intensity of UCNPs which was selective and sensitive to OTA. Under the optimal condition, the fluorescence intensity of UCNPs@SiO2@MIP decreases linearly when the concentration of OTA increases from 0.05 to 1.0 mg/L. The detection limit of OTA with the method was 0.031 mg/L. At three spiked concentration levels (50, 100 and 200 μg/kg), the recovery ranges of OTA in corn, rice and feed are 88.0%–91.6%, 80.2%–91.6% and 89.2%–90.4%, respectively.
文摘High selective molecularly imprinted polymers （MIPs） for tetracycline have been prepared by precipitation polymerization. Effects of monomer and solvent, the ratio of monomer and template and the characterization of the polymer were investigated by frontal chromatography and selectivity experiment. The results clearly indicated that the polymer, which had the highest molecular recognition abilities for tetracycline antibiotics, had been received.
基金the National Natural Science Foundation of China for the funding(No.20771015)the 111 Project(No.B07012)
文摘A novel method to prepare surface plasmon resonance（SPR） sensor chips based on grafted imprinted polymer is explored. Benzophenone photografting system is used to grow molecularly imprinted polymer（MIP） films from the modified surface of gold substrate.The surface morphology and thickness of MIP films were investigated by scanning electronic microscope（SEM）.The adsorption properties of sensor chip were studied by SPR spectroscopy.The results demonstrate that nano-MIP films can be constructed on the surface of gold substrate with the good adsorption of template molecules.
基金supported in part by National Institutes of Health T32 AR067708,RO1CA201035the MRB Molecular Imaging Service Center(P50 CA103175)
文摘Discriminating sterile inflammation from infection, especially in cases of aseptic loosening versus an actual prosthetic joint infection, is challenging and has significant treatment implications. Our goal was to evaluate a novel human monoclonal antibody（mAb） probe directed against the Gram-positive bacterial surface molecule lipoteichoic acid（LTA）. Specificity and affinity were assessed in vitro. We then radiolabeled the anti-LTA mAb and evaluated its effectiveness as a diagnostic imaging tool for detecting infection via immuno PET imaging in an in vivo mouse model of prosthetic joint infection（PJI）. In vitro and ex vivo binding of the anti-LTA mAb to pathogenic bacteria was measured with Octet, ELISA, and flow cytometry. The in vivo PJI mouse model was assessed using traditional imaging modalities, including positron emission tomography（PET） with [^（18）F]FDG and [^（18）F]Na F as well as X-ray computed tomography（CT）, before being evaluated with the zirconium-89-labeled antibody specific for LTA（[^（89）Zr]SAC55）.The anti-LTA mAb exhibited specific binding in vitro to LTA-expressing bacteria. Results from imaging showed that our model could reliably simulate infection at the surgical site by bioluminescent imaging, conventional PET tracer imaging, and bone morphological changes by CT. One day following injection of both the radiolabeled anti-LTA and isotype control antibodies, the anti-LTA antibody demonstrated significantly greater（P 〈 0.05） uptake at S. aureus-infected prosthesis sites over either the same antibody at sterile prosthesis sites or of control non-specific antibody at infected prosthesis sites. Taken together, the radiolabeled anti-LTA mAb, [^（89）Zr]SAC55, may serve as a valuable diagnostic molecular imaging probe to help distinguish between sterile inflammation and infection in the setting of PJI. Future studies are needed to determine whether these findings will translate to human PJI.
基金This work is supported by the National Natural Science Foundation of China(No.21804105)by the Fundamental Research Funds for the Central Universities(No.5003515037)supported by the Huazhong University of Science and Technology Start-up Fund to Xu YU.
文摘Fluorescent nanoparticles have good chemical stability and photostability,controllable optical properties and larger stokes shift.In light of their designability and functionability,the fluorescent nanoparticles are widely used as the fluorescent probes for diverse applications.To enhance the sensitivity and selectivity,the combination of the fluorescent nanoparticles with the molecularly imprinted polymer,i.e.molecularly imprinted fluorescent nanoparticles(MIFN),was an effective way.The sensor based on MIFN(the MIFN sensor)could be more compatible with the complex sample matrix,which was especially widely adopted in medical and biological analysis.In this mini-review,the construction method,detective mechanism and types of MIFN sensors are elaborated.The current applications of MIFN sensors in pharmaceutical analysis,including pesticides/herbicide,veterinary drugs/drugs residues and human related proteins,are highlighted based on the literature in the recent three years.Finally,the research prospect and development trend of the MIFN sensor are forecasted.
基金supported by National Key Technology R&D Program in the 11th Five-Year Plan of China(No.2009BADB9B02)
文摘A rapid, simple and selective method based on molecularly imprinted, spin column extraction coupled with fluorescence detection was successfully established for the determination of 2,4-dinitrophenol in serum samples. The 2,4-dinitrophenol imprinted polymers exhibited highly selective recognition for the template molecule and the maximum adsorption capacity was 138.9 mg/g. The results indicated that when water is used as the loading solution, only 2,4-dinitrophenol could be adsorbed on the spin column without the remaining structural analogs（2-nitrophenol, 4-nitrophenol and phenol）. After eluting with acetonitrile/acetic acid（9/1, v/v）, 2,4-dinitrophenol in serum samples could be determined by using the fluorescence spectrometer, based on the fluorescence enhancement of fluorescein by the template molecule. Under the optimal conditions, the spiked recovery ranged from 95.8% to 103.4% and the detection limit was 1 nmol/L. The results confirmed the reliability and practicality of the protocol and revealed a good perspective of this method for biological sample analysis.
基金supported by the National Natural Science Foundations of China(No.30873193 and No.30672551)
文摘An S-naproxen（S-NAP）molecularly imprinted monolithic stationary phase（MIMSP）with specific recognition for S-NAP and naproxen（NAP）was prepared by in situ technique,utilizing 4-vinylpridine（4-VP）as a function monomer,ethylene glycol dimethacrylate（EDMA）as a cross-linking agent,and low-polar solvents（toluene and dodecanol）as porogenic solvents.The selectivity of the polymers for S-NAP and NAP was evaluated by high performance liquid chromatography（HPLC）.The binding characteristics were tested by Scatchard analysis.Racemic NAP could be specifically separated to some extent.At the same time,NAP could be separated from ibuprofen under optimized conditions.Scatchard analysis showed that two classes of binding sites existed in the S-NAP-imprinted polymers,with their dissociation constants estimated to be 1.045 and 5.496 μM,respectively.The results demonstrate that S-NAP and NAP can be recognized specifically on the obtained MIMSP.
基金supported by the Natural Science Foundation of China (41076065)the Major State Basic Research Development Program of China (973 Program) (2010CB428701)
文摘Molecularly imprinted polymers （MIPs） were prepared by the bulk polymerization using crystal violet as the template molecule, and the methacrylic acid and ethylene glycol dimetheacrylate as functional monomer and cross-linker, respectively. Sys- tematic investigations of synthetic conditions were conducted. The surface morphology and recognition mechanism of the obtained polymers were studied using scanning electron microscope and spectrophotometric analysis. MIPs showed high atTmity to template molecule and were successfully applied as special solid-phase extraction sorbent for selective extraction of crystal violet from natural seawater. An off-line molecularly imprinted solid-phase extraction （MISPE） method followed by high-performance liquid chroma- tography with diodearray detection for the analysis of crystal violet was also established. MISPE columns have good recoveries for crystal violet standard solutions and good linearity was obtained over the concentration range of 0-200 ~tg L-1 （R2 〉 0.99）. Finally, two natural seawater samples were investigated. The recoveries of spiked seawater on the MISPE columns were from 44.47% to 62.34%, the relative standard deviation （n=3） being in the range of 2.89%-5.96%.
