Muon tomography is a capable imaging technique to measure the geometry of high-Z objects. However,most existed algorithms used in muon tomography have obscured the effects of angular distribution and momentum spectra ...Muon tomography is a capable imaging technique to measure the geometry of high-Z objects. However,most existed algorithms used in muon tomography have obscured the effects of angular distribution and momentum spectra of cosmic ray muons and reduced the spatial resolution. We present a modified multi-group model that takes into account these effects and calibrates the model by the material of lead. Performance tests establish that the model is capable of measuring the thickness of a Pb slab and identifying the material of an unknown slab on a reasonable exposure timescale, in both cases of complete and incomplete angular data. Results show that the modified multi-group model is helpful for improvements in image resolution in real applications.展开更多
As a crucial human activity,dam construction can profoundly impact the surface hydrology patterns.The Three Gorges Reservoir(TGR),as one of the largest hydraulic engineering projects in the world,has gained continuous...As a crucial human activity,dam construction can profoundly impact the surface hydrology patterns.The Three Gorges Reservoir(TGR),as one of the largest hydraulic engineering projects in the world,has gained continuous attention for its eco-hydrological effects.However,further investigation is necessary to understand the runoff and social impacts of the TGR on the Upper Yangtze River.This study first employed a modified SWAT model to simulate runoff,compared scenarios with and without the TGR,and finally evaluated water supply and demand in the Upper Yangtze River.The results showed a significant increasing trend in the surface water area of the Upper Yangtze River from 2000-2020.The modified SWAT model performs well in simulating the runoff,with Nash-Sutcliffe Efficiency and Percent Bias improved by 0.04-0.30 and 2-31.90,respectively.Scenario simulation results revealed that the TGR reduced seasonal differences in runoff.During the flood season,the runoff volume at the Yichang Station in the scenario with the TGR is lower than in the scenario without the TGR,peaking at 4500 m3/s.Conversely,in the dry season,the runoff volume of the scenario with TGR is higher,with a maximum increase of 1500 m3/s.The region exhibiting the greatest runoff variations is the Yangtze River's main stem in the Three Gorges Reservoir region.Besides,the TGR notably alleviated the water supply-demand imbalance in Chongqing during the winter and spring seasons,with a maximum increase of 0.16 in the supplydemand index.This study can contribute significantly to understanding the natural and social impacts of the TGR from the perspective of hydrological and scenario simulation.展开更多
To investigate the performance of utilizing the shape memory effect of SMA(Shape Memory Alloy)wire to generate recovery stress,this paper performed single heating recovery stress tests and reciprocating heating-coolin...To investigate the performance of utilizing the shape memory effect of SMA(Shape Memory Alloy)wire to generate recovery stress,this paper performed single heating recovery stress tests and reciprocating heating-cooling recovery stress tests on SMA wire under varying initial strain conditions.The effects of various strains and different energized heating methods on the recovery stress of SMA wires were explored in the single heating tests.The SMA wire was strained from 2%to 8%initially,and two distinct heating approaches were employed:one using a large current interval for rapid heating and one using a small current interval for slower heating.The experimental outcomes reveal that during a single heating cycle,the temperature-recovery stress relationship of SMA wire exhibits three distinct stages:the martensite phase stage,the transition stage from martensite to austenite phase,and the austenite phase stage.Notably,the choice of heating method does not influence the maximum recovery stress value,and the correlation between initial strain and maximum recovery stress is predominantly linear.Moreover,conducting the reciprocating temperature rise and fall performance test is important to better simulate the scenario in practical engineering where multiple recovery stress in SMA wires for structural repair.In this test,two temperature cycling methods were studied:interval rise and fall,as well as direct rise and fall.In the case of utilizing the interval temperature rise and fall method,it was observed that the recovery stress associated with cooling was significantly higher than that corresponding to heating at the same temperature.Furthermore,the recovery stress was lower upon subsequent heating than that measured during the previous heating cycle.Based on the experimental results,a prediction model for the temperature-recovery stress relationship has been proposed to simplify numerical calculations.It is hoped that an approximate temperaturerecovery stress curve can be obtained from the parameters of the SMA wire.The calculated values derived from this model show good alignment with the measured values,indicating its reliability.展开更多
Localized rock failures,like cracks or shear bands,demand specific attention in modeling for solids and structures.This is due to the uncertainty of conventional continuum-based mechanical models when localized inelas...Localized rock failures,like cracks or shear bands,demand specific attention in modeling for solids and structures.This is due to the uncertainty of conventional continuum-based mechanical models when localized inelastic deformation has emerged.In such scenarios,as macroscopic inelastic reactions are primarily influenced by deformation and microstructural alterations within the localized area,internal variables that signify these microstructural changes should be established within this zone.Thus,localized deformation characteristics of rocks are studied here by the preset angle shear experiment.A method based on shear displacement and shear stress differences is proposed to identify the compaction,yielding,and residual points for enhancing the model's effectiveness and minimizing subjective influences.Next,a mechanical model for the localized shear band is depicted as an elasto-plastic model outlining the stress-displacement relation across both sides of the shear band.Incorporating damage theory and an elasto-plastic model,a proposed damage model is introduced to replicate shear stressdisplacement responses and localized damage evolution in intact rocks experiencing shear failure.Subsequently,a novel nonlinear mathematical model based on modified logistic growth theory is proposed for depicting the shear band's damage evolution pattern.Thereafter,an innovative damage model is proposed to effectively encompass diverse rock material behaviors,including elasticity,plasticity,and softening behaviors.Ultimately,the effects of the preset angles,temperature,normal stresses and the residual shear strength are carefully discussed.This discovery enhances rock research in the proposed damage model,particularly regarding shear failure mode.展开更多
Effective management of water resources,especially groundwater,is crucial and requires a precise understanding of aquifer characteristics,imposed stresses,and the groundwater balance.Simulation-optimization models pla...Effective management of water resources,especially groundwater,is crucial and requires a precise understanding of aquifer characteristics,imposed stresses,and the groundwater balance.Simulation-optimization models plays a vital role in guiding planners toword sustainable long-term aquifer exploita-tion.This study simulated monthly water table variations in the Kashan Plain over a ten-year period from 2008 to 2019 across 125 stress periods using the GMS model.The model was calibrated for both steady-state and transient conditions for the 2008–2016 period and validated for the 2016–2019 period.Results indicated a 4.4 m decline in groundwater levels over the 10-year study period.Given the plain's location in a arid climatic zone with limited effective precipitation for aquifer recharge,the study focused on ground-water extraction management.A modified two-point hedging policy was employed as a solution to mitigate critical groundwater depletion,reducing the annual drawdown rate from 0.44 m to 0.31 m and conserving 255 million cubic meters(mcm)of water annually.Although this approach slightly decreased reliability(i.e.the number of months meeting full water demands),it effectively minimized the risk of severe droughts and irreparable damages.This policy offers managers a dynamical and intelligent tool for regulating groundwater extraction,balancing aquifer sustainability with agricultural and urban water requirements.展开更多
In this paper, we study a modified Leslie-Gower predator-prey model with Smith growth subject to homogeneous Neumann boundary condition, in which the functional response is the Crowley-Martin functional response term....In this paper, we study a modified Leslie-Gower predator-prey model with Smith growth subject to homogeneous Neumann boundary condition, in which the functional response is the Crowley-Martin functional response term. Firstly, for ODE model, the local stability of equilibrium point is given. And by using bifurcation theory and selecting suitable bifurcation parameters, we find many kinds of bifurcation phenomena, including Transcritical bifurcation and Hopf bifurcation. For the reaction-diffusion model, we find that Turing instability occurs. Besides, it is proved that Hopf bifurcation exists in the model. Finally, numerical simulations are presented to verify and illustrate the theoretical results.展开更多
Through modifying the CPN model, a kind of multivariable fuzzy model is put forward, and the matching fuzzy multistep predictive control algorithm is deduced based on the model. The modified model works in a competiti...Through modifying the CPN model, a kind of multivariable fuzzy model is put forward, and the matching fuzzy multistep predictive control algorithm is deduced based on the model. The modified model works in a competitive output manner which results in its local representation property. While studying on line, only a few parameters need to be regulated. So the model has the merits of fast learning and on line self organizing modeling. The control algorithm is simple, adaptive and useful in multivariable and time delay systems. Applying the algorithm in a paper making system, simulation shows its good effect.展开更多
Compaction process simulation and residual stress prediction of green PM compact were carried out with elasto-plastic 3D FEA based on the modified Drueker-Prager Cap model in Abaqus. The model parameters of the invest...Compaction process simulation and residual stress prediction of green PM compact were carried out with elasto-plastic 3D FEA based on the modified Drueker-Prager Cap model in Abaqus. The model parameters of the investigated powder Distaloy AE were determined as functions of relative density through typical mechanical property tests of powder. The model was implemented as a user subroutine USDFLD. Single sided compaction of a d20 ram^5 mm disk green compact of Distaloy AE was simulated, and the residual stress of the disk after ejection was predicted with FEA. The FEA results of the compaction process and the residual stress of the disk show good agreement with compaction experiments and X-ray diffraction measurements, which validates the model and its parameters. The results indicate that the compressive residual stresses exist mainly in a thin layer on the side surface, but the residual stresses are very small on the top and bottom surfaces.展开更多
Tensile tests at different strain rates(0.0002, 0.002, 0.02, 1000 and 3000 s^(-1)) were carried out for 7N01 aluminum alloy. Low strain rate experiments(0.0002, 0.002 and 0.02 s^(-1)) were conducted using an electroni...Tensile tests at different strain rates(0.0002, 0.002, 0.02, 1000 and 3000 s^(-1)) were carried out for 7N01 aluminum alloy. Low strain rate experiments(0.0002, 0.002 and 0.02 s^(-1)) were conducted using an electronic mechanical universal testing machine, while high strain rate experiments(1000, 3000 s^(-1)) were carried out through a split Hopkinson tensile bar. The experimental results showed that 7N01 aluminum alloy is strain rate sensitive. By introducing a correction scheme of the strain rate hardening coefficient, a modified Johnson–Cook model was proposed to describe the flow behaviors of 7N01 aluminum alloy. The proposed model fitted the experimental data better than the original Johnson–Cook model in plastic flow under dynamic condition. Numerical simulations of the dynamic tensile tests were performed using ABAQUS with the modified Johnson–Cook model. Digital image correlation was used together with high-speed photography to study the mechanical characters of specimen at high strain rate. Good correlations between the experiments results, numerical predictions and DIC results are achieved. High accuracy of the modified Johnson-Cook model was validated.展开更多
Considering the compressibility of the cavity in the cavitating flow, this paper presents a modified k-ω model for predicting the cavitating flow in a centrifugal pump, in which the modified k-ω model and Schnerr-Sa...Considering the compressibility of the cavity in the cavitating flow, this paper presents a modified k-ω model for predicting the cavitating flow in a centrifugal pump, in which the modified k-ω model and Schnerr-Sauer cavitation model were combined with ANSYS CFX. To evaluate the modified and standard k-co models, numerical simulations were performed with these two models, respectively, and the calculation results were compared with the experimental data. Numerical simulations were executed with three different values of the flow coefficient, and the simulation results of the modified k-ω model showed agreement with most of the experimental data. The cavitating flow in the centrifugal pump obtained by the modified k-ω model at the design flow coefficient of 0.102, was analyzed. When the cavitation number decreases, the cavity initially generates on the suction side of the blade near the leading edge and then expands to the outlet of the impeller, and the decrease of the total pressure coefficient mainly occurs upstream of the impeller passage, while the downstream remains almost unaffected by the development of cavitation.展开更多
Considering the discontinuous characteristics of sea ice on various scales,a modified discrete element model（DEM） for sea ice dynamics is developed based on the granular material rheology.In this modified DEM,a soft...Considering the discontinuous characteristics of sea ice on various scales,a modified discrete element model（DEM） for sea ice dynamics is developed based on the granular material rheology.In this modified DEM,a soft sea ice particle element is introduced as a self-adjustive particle size function.Each ice particle can be treated as an assembly of ice floes,with its concentration and thickness changing to variable sizes under the conservation of mass.In this model,the contact forces among ice particles are calculated using a viscous-elastic-plastic model,while the maximum shear forces are described with the Mohr-Coulomb friction law.With this modified DEM,the ice flow dynamics is simulated under the drags of wind and current in a channel of various widths.The thicknesses,concentrations and velocities of ice particles are obtained,and then reasonable dynamic process is analyzed.The sea ice dynamic process is also simulated in a vortex wind field.Taking the influence of thermodynamics into account,this modified DEM will be improved in the future work.展开更多
Estimating long-term creep deformation and life of materials is an effective way to ensure the service safety and to reduce the cost of long-term integrity evaluation of high temperature structural materials.Since the...Estimating long-term creep deformation and life of materials is an effective way to ensure the service safety and to reduce the cost of long-term integrity evaluation of high temperature structural materials.Since the 1980 s, the θ projection model has been widely used for predicting creep lives due to its ability to capture the characteristic transitions observed in creep curves obtained under constant true stress conditions. However, the creep rupture behavior under constant load or engineering stress conditions cannot be simulated accurately using this model because of the different stress states. In this paper, creep curves obtained under constant load conditions were analyzed using a modified θ projection model by considering the increase in true stress with creep deformation during the creep tests. This model is expressed as ε = θ_1(1-e^(-θ_2t)) + θ3 e^(θ_4e^θ5^εt)-1, and was validated using the creep curves of K465 and DZ125 superalloys tested at a range of temperatures and engineering stresses. Moreover, it was shown that the predictive capability of the modified θ projection model was significantly improved over the original one, as it reduces the prediction uncertainty from a range of 10% to 20% to below 5%. Meanwhile,it was shown that the model can be reasonably used for predicting constant stress creep conditions, when appropriate parameters are used. The prediction performance of the modified model will be discussed in another paper. The results of this study show great potential for the evaluation and assessment of the service safety of structural materials used in applications where designs are limited by creep deformation.展开更多
AIM:To explore the related risk factors for diabetic retinopathy(DR)in type 2 diabetes with insulin therapy.METHODS:We studied the relationships among blood glucose,serum C-peptide,plasma insulin,beta-cell function an...AIM:To explore the related risk factors for diabetic retinopathy(DR)in type 2 diabetes with insulin therapy.METHODS:We studied the relationships among blood glucose,serum C-peptide,plasma insulin,beta-cell function and the development of DR.Beta-cell function was assessed by a modified homeostasis model assessment(modified HOMA)which was gained by using C-peptide to replace insulin in the homeostasis model assessment(HOMA)of beta-cell function.We also studied the relationships between modified HOMA index and serum C-peptide response to 100 g tasteless steamed bread to determine the accuracy of modified HOMA.RESULTS:Our study group consisted of 170 type 2diabetic inpatients with DR(age:58.35±13.87y,mean±SD)and 205 type 2 diabetic inpatients with no DR(NDR)(age:65.52±11.59y).DR patients had higher age,longer diabetic duration,higher hypertension grade,higher postprandial plasma glucose,higher fluctuation level of plasma glucose,lower body mass index(BMI),lower postprandial serum insulin and C-peptide,lower fluctuation level of serum insulin and C-peptide(P【0.05).In our logistic regression model,duration of diabetes,hypertension grade,fasting plasma insulin and glycosylated hemoglobin(HbA1C)were significantly associated with the presence of DR after adjustment for confounding factors(P【0.05).CONCLUSION:Our results suggested although modified HOMA showed significant correlation to the occurrence of DR on Spearman’s rank-correlationanalysis,logistic regression showed no significant association between these two variables after adjustment for relevant confounding factors(such as age,sex,duration of diabetes,BMI,hypertension grade,HbA1C,plasma insulin).Duration of diabetes,hypertension grade,fasting plasma insulin and HbA1C were independently associated with the development of DR in Chinese type 2 diabetics.展开更多
Two modifications for the basic Barcelona model(BBM) are present. One is the replacement of the net stress by the average skeleton stress in unsaturated soil modeling, and the other is the adoption of an expression fo...Two modifications for the basic Barcelona model(BBM) are present. One is the replacement of the net stress by the average skeleton stress in unsaturated soil modeling, and the other is the adoption of an expression for the load-collapse(LC) yield surface that can match flexibly the normal compression lines at different suctions. The predictions of the modified BBM for the controlled-suction triaxial test on the unsaturated compacted clay are presented and compared with the experimental results. A good agreement between the predicted and experimental results demonstrates the reasonability of the modified BBM. On this basis, the coupled processes of groundwater flow and soil deformation in a homogeneous soil slope under a long heavy rainfall are simulated with the proposed elasto-plastic model. The numerical results reveal that the failure of a slope under rainfall infiltration is due to both the reduction of soil suction and the significant rise in groundwater table. The evolution of the displacements is greatly related to the change of suction. The maximum collapse deformation happens near the surface of slope where infiltrated rainwater can quickly reach. The results may provide a helpful reference for hazard assessment and control of rainfall-induced landslides.展开更多
In order to establish a restoring-force model for modified concrete columns with recycled aggregates concrete(RAC), cyclic loading tests were carried out on five concretes with RAC columns and ordinary concrete frame ...In order to establish a restoring-force model for modified concrete columns with recycled aggregates concrete(RAC), cyclic loading tests were carried out on five concretes with RAC columns and ordinary concrete frame columns under the combined influence with different admixtures and admixtures ratios(silica fume and hybrid fiber). The expressions for characteristic nodes of the skeleton curve were given by the analysis and numerical regression of the test results. In addition, the hysteretic rules of the restoring-force model and the expression for unloading stiffness were presented. Finally, we summed up the complete calculation method of the hysteretic restoring force, whose results were in good agreement with experiment. The results demonstrated that the proposed model could simulate and reflect the corresponding hysteretic behaviors, and the calculation method can provide the theoretical basis for the engineering application.展开更多
Radius of ceramic cone can largely contribute into final solution of analytic models of penetration into ceramic/metal targets.In the present research,a modified model based on radius of ceramic cone was presented for...Radius of ceramic cone can largely contribute into final solution of analytic models of penetration into ceramic/metal targets.In the present research,a modified model based on radius of ceramic cone was presented for ceramic/aluminum targets.In order to investigate and evaluate accuracy of the presented analytic model,obtained results were compared against the results of the Florence’s analytic model and also against numerical modeling results.The phenomenon of impact onto ceramic/aluminum composites were modeled using smoothed particle hydrodynamics(SPH)implemented utilizing ABAQUS Software.Results indicated that,with increasing initial velocity and ceramic thickness and decreasing support layer thickness,the radius of ceramic cone decreases;this ends up increasing residual velocity of the projectile and penetration time and extending the area across which the pressure is distributed.These findings indicate enhanced levels of target energy absorption and the required energy for bending and tensioning the target.As such,it can be observed that,at the same thickness and areal density,the ceramic target has its efficiency enhanced with increasing ceramic thickness and decreasing the support layer thickness.Finally,the results revealed that the associated data with SPH confirm the modified analytic model at higher accuracy than the Florence’s analytic model.展开更多
The hot compressive deformation behaviors of Cu-6wt.%Ag alloy were studied experimentally in the temperature range of 973.1123 K and the strain rate range of 0.01.10 s^-1.The stress increases and reaches the maximum v...The hot compressive deformation behaviors of Cu-6wt.%Ag alloy were studied experimentally in the temperature range of 973.1123 K and the strain rate range of 0.01.10 s^-1.The stress increases and reaches the maximum value when the true strain is very small,and then the stress changes slowly and tends to be stable under the action of work hardening,dynamic recovery and recrystallization.The material parameters of the conventional Arrhenius constitutive model are only related to strain under different deformation conditions,and the prediction error is large,which cannot accurately characterize the hot deformation behavior of the alloy.To describe the hot deformation behavior of the alloy accurately,a modified constitutive model was established by considering the simultaneous influence of forming temperature,strain rate and strain.The results indicate that correlation coefficient(R)and the average absolute relative error(AARE)are 0.993 and 4.2%,respectively.The modified constitutive model can accurately describe the hot deformation behavior of Cu-6wt.%Ag alloy.展开更多
Taking into account the viscoelasticity of the fenugreek gum, a modified Maxwell model in terms of fractional derivatives is developed. Using this model, it is observed that the fenugreek gums with at least two differ...Taking into account the viscoelasticity of the fenugreek gum, a modified Maxwell model in terms of fractional derivatives is developed. Using this model, it is observed that the fenugreek gums with at least two different concentrations obey the Cox-Merz rule.展开更多
The theoretical flame temperature （TFT） before tuyere, always highly concerned by blast furnace （BF） operators, is one of the most important parameters for evaluating the thermal state of hearth. However, some inf...The theoretical flame temperature （TFT） before tuyere, always highly concerned by blast furnace （BF） operators, is one of the most important parameters for evaluating the thermal state of hearth. However, some influ- encing parameters, for example, the SiO2 reduction by carbon, were always neglected or inaccurate when calculating the TFT. According to the definition of TFT, the temperature of coke into raceway and the reduction rate of SiO2 in ash of coke and pulverized coal were obtained by analyzing the samples before tuyere in blast furnace. Taking full ac- count of different factors, a modified model for calculating the TFT in blast furnace was established. The effects of the oxygen enrichment rate, the reduction rate of SiO2 in raceway, the ash content in coke and pulverized coal and the pulverized coal injection （PCI） rate on TFT were determined quantitatively. The modified model was applied to selecting the used coal for PCI in blast furnace. Considering the different SiO2 contents of mixed coal, the calculated TFT remained a stable level. This showed that the selected coal could be suitable for PCI in blast furnace.展开更多
基金supported by the Science and Technology Development Foundation of CAEP(No.2015B0103014)the National Natural Science Foundation of China(No.11605163)
文摘Muon tomography is a capable imaging technique to measure the geometry of high-Z objects. However,most existed algorithms used in muon tomography have obscured the effects of angular distribution and momentum spectra of cosmic ray muons and reduced the spatial resolution. We present a modified multi-group model that takes into account these effects and calibrates the model by the material of lead. Performance tests establish that the model is capable of measuring the thickness of a Pb slab and identifying the material of an unknown slab on a reasonable exposure timescale, in both cases of complete and incomplete angular data. Results show that the modified multi-group model is helpful for improvements in image resolution in real applications.
基金supported by the National Natural Science Foundation of China(Nos.41975044,42371354,41801021,42101385)Open Fund of Hubei Luojia Laboratory(No.2201000043)the Fundamental Research Funds for National Universities,China University of Geosciences,Wuhan。
文摘As a crucial human activity,dam construction can profoundly impact the surface hydrology patterns.The Three Gorges Reservoir(TGR),as one of the largest hydraulic engineering projects in the world,has gained continuous attention for its eco-hydrological effects.However,further investigation is necessary to understand the runoff and social impacts of the TGR on the Upper Yangtze River.This study first employed a modified SWAT model to simulate runoff,compared scenarios with and without the TGR,and finally evaluated water supply and demand in the Upper Yangtze River.The results showed a significant increasing trend in the surface water area of the Upper Yangtze River from 2000-2020.The modified SWAT model performs well in simulating the runoff,with Nash-Sutcliffe Efficiency and Percent Bias improved by 0.04-0.30 and 2-31.90,respectively.Scenario simulation results revealed that the TGR reduced seasonal differences in runoff.During the flood season,the runoff volume at the Yichang Station in the scenario with the TGR is lower than in the scenario without the TGR,peaking at 4500 m3/s.Conversely,in the dry season,the runoff volume of the scenario with TGR is higher,with a maximum increase of 1500 m3/s.The region exhibiting the greatest runoff variations is the Yangtze River's main stem in the Three Gorges Reservoir region.Besides,the TGR notably alleviated the water supply-demand imbalance in Chongqing during the winter and spring seasons,with a maximum increase of 0.16 in the supplydemand index.This study can contribute significantly to understanding the natural and social impacts of the TGR from the perspective of hydrological and scenario simulation.
基金financially supported by National Natural Science Foundation of China(Project No.51878156).
文摘To investigate the performance of utilizing the shape memory effect of SMA(Shape Memory Alloy)wire to generate recovery stress,this paper performed single heating recovery stress tests and reciprocating heating-cooling recovery stress tests on SMA wire under varying initial strain conditions.The effects of various strains and different energized heating methods on the recovery stress of SMA wires were explored in the single heating tests.The SMA wire was strained from 2%to 8%initially,and two distinct heating approaches were employed:one using a large current interval for rapid heating and one using a small current interval for slower heating.The experimental outcomes reveal that during a single heating cycle,the temperature-recovery stress relationship of SMA wire exhibits three distinct stages:the martensite phase stage,the transition stage from martensite to austenite phase,and the austenite phase stage.Notably,the choice of heating method does not influence the maximum recovery stress value,and the correlation between initial strain and maximum recovery stress is predominantly linear.Moreover,conducting the reciprocating temperature rise and fall performance test is important to better simulate the scenario in practical engineering where multiple recovery stress in SMA wires for structural repair.In this test,two temperature cycling methods were studied:interval rise and fall,as well as direct rise and fall.In the case of utilizing the interval temperature rise and fall method,it was observed that the recovery stress associated with cooling was significantly higher than that corresponding to heating at the same temperature.Furthermore,the recovery stress was lower upon subsequent heating than that measured during the previous heating cycle.Based on the experimental results,a prediction model for the temperature-recovery stress relationship has been proposed to simplify numerical calculations.It is hoped that an approximate temperaturerecovery stress curve can be obtained from the parameters of the SMA wire.The calculated values derived from this model show good alignment with the measured values,indicating its reliability.
基金supported by the China Scholarship Council Program(Grant No.202008320274)it is also supported by Technical University of Munich.
文摘Localized rock failures,like cracks or shear bands,demand specific attention in modeling for solids and structures.This is due to the uncertainty of conventional continuum-based mechanical models when localized inelastic deformation has emerged.In such scenarios,as macroscopic inelastic reactions are primarily influenced by deformation and microstructural alterations within the localized area,internal variables that signify these microstructural changes should be established within this zone.Thus,localized deformation characteristics of rocks are studied here by the preset angle shear experiment.A method based on shear displacement and shear stress differences is proposed to identify the compaction,yielding,and residual points for enhancing the model's effectiveness and minimizing subjective influences.Next,a mechanical model for the localized shear band is depicted as an elasto-plastic model outlining the stress-displacement relation across both sides of the shear band.Incorporating damage theory and an elasto-plastic model,a proposed damage model is introduced to replicate shear stressdisplacement responses and localized damage evolution in intact rocks experiencing shear failure.Subsequently,a novel nonlinear mathematical model based on modified logistic growth theory is proposed for depicting the shear band's damage evolution pattern.Thereafter,an innovative damage model is proposed to effectively encompass diverse rock material behaviors,including elasticity,plasticity,and softening behaviors.Ultimately,the effects of the preset angles,temperature,normal stresses and the residual shear strength are carefully discussed.This discovery enhances rock research in the proposed damage model,particularly regarding shear failure mode.
文摘Effective management of water resources,especially groundwater,is crucial and requires a precise understanding of aquifer characteristics,imposed stresses,and the groundwater balance.Simulation-optimization models plays a vital role in guiding planners toword sustainable long-term aquifer exploita-tion.This study simulated monthly water table variations in the Kashan Plain over a ten-year period from 2008 to 2019 across 125 stress periods using the GMS model.The model was calibrated for both steady-state and transient conditions for the 2008–2016 period and validated for the 2016–2019 period.Results indicated a 4.4 m decline in groundwater levels over the 10-year study period.Given the plain's location in a arid climatic zone with limited effective precipitation for aquifer recharge,the study focused on ground-water extraction management.A modified two-point hedging policy was employed as a solution to mitigate critical groundwater depletion,reducing the annual drawdown rate from 0.44 m to 0.31 m and conserving 255 million cubic meters(mcm)of water annually.Although this approach slightly decreased reliability(i.e.the number of months meeting full water demands),it effectively minimized the risk of severe droughts and irreparable damages.This policy offers managers a dynamical and intelligent tool for regulating groundwater extraction,balancing aquifer sustainability with agricultural and urban water requirements.
文摘In this paper, we study a modified Leslie-Gower predator-prey model with Smith growth subject to homogeneous Neumann boundary condition, in which the functional response is the Crowley-Martin functional response term. Firstly, for ODE model, the local stability of equilibrium point is given. And by using bifurcation theory and selecting suitable bifurcation parameters, we find many kinds of bifurcation phenomena, including Transcritical bifurcation and Hopf bifurcation. For the reaction-diffusion model, we find that Turing instability occurs. Besides, it is proved that Hopf bifurcation exists in the model. Finally, numerical simulations are presented to verify and illustrate the theoretical results.
文摘Through modifying the CPN model, a kind of multivariable fuzzy model is put forward, and the matching fuzzy multistep predictive control algorithm is deduced based on the model. The modified model works in a competitive output manner which results in its local representation property. While studying on line, only a few parameters need to be regulated. So the model has the merits of fast learning and on line self organizing modeling. The control algorithm is simple, adaptive and useful in multivariable and time delay systems. Applying the algorithm in a paper making system, simulation shows its good effect.
基金Project(2009ZX04004-031-04) supported by the National Science and Technology Major Project of the Ministry of Science and Technology of China
文摘Compaction process simulation and residual stress prediction of green PM compact were carried out with elasto-plastic 3D FEA based on the modified Drueker-Prager Cap model in Abaqus. The model parameters of the investigated powder Distaloy AE were determined as functions of relative density through typical mechanical property tests of powder. The model was implemented as a user subroutine USDFLD. Single sided compaction of a d20 ram^5 mm disk green compact of Distaloy AE was simulated, and the residual stress of the disk after ejection was predicted with FEA. The FEA results of the compaction process and the residual stress of the disk show good agreement with compaction experiments and X-ray diffraction measurements, which validates the model and its parameters. The results indicate that the compressive residual stresses exist mainly in a thin layer on the side surface, but the residual stresses are very small on the top and bottom surfaces.
基金Projects(51275532,U1334208)supported by the National Natural Science Foundation of ChinaProject(2015BAG13B01)supported by National Science and Technology Support Program,China+2 种基金Project(2016YFB1200602-33)supported by the National Key R&D Program of ChinaProject(NCET-12-0549)supported by the New Century Excellent Talents in University,ChinaProject(CSUZC201527)supported by the Open-Fund for the Valuable and Precision Instruments of Central South University,China
文摘Tensile tests at different strain rates(0.0002, 0.002, 0.02, 1000 and 3000 s^(-1)) were carried out for 7N01 aluminum alloy. Low strain rate experiments(0.0002, 0.002 and 0.02 s^(-1)) were conducted using an electronic mechanical universal testing machine, while high strain rate experiments(1000, 3000 s^(-1)) were carried out through a split Hopkinson tensile bar. The experimental results showed that 7N01 aluminum alloy is strain rate sensitive. By introducing a correction scheme of the strain rate hardening coefficient, a modified Johnson–Cook model was proposed to describe the flow behaviors of 7N01 aluminum alloy. The proposed model fitted the experimental data better than the original Johnson–Cook model in plastic flow under dynamic condition. Numerical simulations of the dynamic tensile tests were performed using ABAQUS with the modified Johnson–Cook model. Digital image correlation was used together with high-speed photography to study the mechanical characters of specimen at high strain rate. Good correlations between the experiments results, numerical predictions and DIC results are achieved. High accuracy of the modified Johnson-Cook model was validated.
基金supported by the National Natural Science Foundation of China (Grants No. 51179075 and 51239005) A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘Considering the compressibility of the cavity in the cavitating flow, this paper presents a modified k-ω model for predicting the cavitating flow in a centrifugal pump, in which the modified k-ω model and Schnerr-Sauer cavitation model were combined with ANSYS CFX. To evaluate the modified and standard k-co models, numerical simulations were performed with these two models, respectively, and the calculation results were compared with the experimental data. Numerical simulations were executed with three different values of the flow coefficient, and the simulation results of the modified k-ω model showed agreement with most of the experimental data. The cavitating flow in the centrifugal pump obtained by the modified k-ω model at the design flow coefficient of 0.102, was analyzed. When the cavitation number decreases, the cavity initially generates on the suction side of the blade near the leading edge and then expands to the outlet of the impeller, and the decrease of the total pressure coefficient mainly occurs upstream of the impeller passage, while the downstream remains almost unaffected by the development of cavitation.
基金Special Fund of Marine Commonweal Industry under contact Nos 201105016 and 201205007supported by National Marine Environment Forecasting Centrethe National Natural Science Foundation of China under contact No.41176012
文摘Considering the discontinuous characteristics of sea ice on various scales,a modified discrete element model（DEM） for sea ice dynamics is developed based on the granular material rheology.In this modified DEM,a soft sea ice particle element is introduced as a self-adjustive particle size function.Each ice particle can be treated as an assembly of ice floes,with its concentration and thickness changing to variable sizes under the conservation of mass.In this model,the contact forces among ice particles are calculated using a viscous-elastic-plastic model,while the maximum shear forces are described with the Mohr-Coulomb friction law.With this modified DEM,the ice flow dynamics is simulated under the drags of wind and current in a channel of various widths.The thicknesses,concentrations and velocities of ice particles are obtained,and then reasonable dynamic process is analyzed.The sea ice dynamic process is also simulated in a vortex wind field.Taking the influence of thermodynamics into account,this modified DEM will be improved in the future work.
基金the National Key Research and Development Program of China(Grant No.2017YFB0702902)the National Natural Science Foundation of China(Grant Nos.51631008and 51771019)+1 种基金the National High Technology Research Program of China(Grant No.2012AA03A513)the 111 Project(No.B170003)
文摘Estimating long-term creep deformation and life of materials is an effective way to ensure the service safety and to reduce the cost of long-term integrity evaluation of high temperature structural materials.Since the 1980 s, the θ projection model has been widely used for predicting creep lives due to its ability to capture the characteristic transitions observed in creep curves obtained under constant true stress conditions. However, the creep rupture behavior under constant load or engineering stress conditions cannot be simulated accurately using this model because of the different stress states. In this paper, creep curves obtained under constant load conditions were analyzed using a modified θ projection model by considering the increase in true stress with creep deformation during the creep tests. This model is expressed as ε = θ_1(1-e^(-θ_2t)) + θ3 e^(θ_4e^θ5^εt)-1, and was validated using the creep curves of K465 and DZ125 superalloys tested at a range of temperatures and engineering stresses. Moreover, it was shown that the predictive capability of the modified θ projection model was significantly improved over the original one, as it reduces the prediction uncertainty from a range of 10% to 20% to below 5%. Meanwhile,it was shown that the model can be reasonably used for predicting constant stress creep conditions, when appropriate parameters are used. The prediction performance of the modified model will be discussed in another paper. The results of this study show great potential for the evaluation and assessment of the service safety of structural materials used in applications where designs are limited by creep deformation.
文摘AIM:To explore the related risk factors for diabetic retinopathy(DR)in type 2 diabetes with insulin therapy.METHODS:We studied the relationships among blood glucose,serum C-peptide,plasma insulin,beta-cell function and the development of DR.Beta-cell function was assessed by a modified homeostasis model assessment(modified HOMA)which was gained by using C-peptide to replace insulin in the homeostasis model assessment(HOMA)of beta-cell function.We also studied the relationships between modified HOMA index and serum C-peptide response to 100 g tasteless steamed bread to determine the accuracy of modified HOMA.RESULTS:Our study group consisted of 170 type 2diabetic inpatients with DR(age:58.35±13.87y,mean±SD)and 205 type 2 diabetic inpatients with no DR(NDR)(age:65.52±11.59y).DR patients had higher age,longer diabetic duration,higher hypertension grade,higher postprandial plasma glucose,higher fluctuation level of plasma glucose,lower body mass index(BMI),lower postprandial serum insulin and C-peptide,lower fluctuation level of serum insulin and C-peptide(P【0.05).In our logistic regression model,duration of diabetes,hypertension grade,fasting plasma insulin and glycosylated hemoglobin(HbA1C)were significantly associated with the presence of DR after adjustment for confounding factors(P【0.05).CONCLUSION:Our results suggested although modified HOMA showed significant correlation to the occurrence of DR on Spearman’s rank-correlationanalysis,logistic regression showed no significant association between these two variables after adjustment for relevant confounding factors(such as age,sex,duration of diabetes,BMI,hypertension grade,HbA1C,plasma insulin).Duration of diabetes,hypertension grade,fasting plasma insulin and HbA1C were independently associated with the development of DR in Chinese type 2 diabetics.
基金Project(1301015A)supported by the Post-doctoral Research Fund of Jiangsu Province,ChinaProject Funded by the Priority Academic Program of Jiangsu Higher Education Institution,China+1 种基金Project(2014M561566)supported by China Postdoctoral Science FoundationProject(YK913007)supported by Key Laboratory of Earth-Rock Dam Failure Mechanism and Safety Control Technologies,China
文摘Two modifications for the basic Barcelona model(BBM) are present. One is the replacement of the net stress by the average skeleton stress in unsaturated soil modeling, and the other is the adoption of an expression for the load-collapse(LC) yield surface that can match flexibly the normal compression lines at different suctions. The predictions of the modified BBM for the controlled-suction triaxial test on the unsaturated compacted clay are presented and compared with the experimental results. A good agreement between the predicted and experimental results demonstrates the reasonability of the modified BBM. On this basis, the coupled processes of groundwater flow and soil deformation in a homogeneous soil slope under a long heavy rainfall are simulated with the proposed elasto-plastic model. The numerical results reveal that the failure of a slope under rainfall infiltration is due to both the reduction of soil suction and the significant rise in groundwater table. The evolution of the displacements is greatly related to the change of suction. The maximum collapse deformation happens near the surface of slope where infiltrated rainwater can quickly reach. The results may provide a helpful reference for hazard assessment and control of rainfall-induced landslides.
基金Project(51178388)supported by the National Natural Science Foundation of ChinaProject(2013SZS01-Z02)supported by Key Laboratory Fund of Shaanxi Province,China
文摘In order to establish a restoring-force model for modified concrete columns with recycled aggregates concrete(RAC), cyclic loading tests were carried out on five concretes with RAC columns and ordinary concrete frame columns under the combined influence with different admixtures and admixtures ratios(silica fume and hybrid fiber). The expressions for characteristic nodes of the skeleton curve were given by the analysis and numerical regression of the test results. In addition, the hysteretic rules of the restoring-force model and the expression for unloading stiffness were presented. Finally, we summed up the complete calculation method of the hysteretic restoring force, whose results were in good agreement with experiment. The results demonstrated that the proposed model could simulate and reflect the corresponding hysteretic behaviors, and the calculation method can provide the theoretical basis for the engineering application.
文摘Radius of ceramic cone can largely contribute into final solution of analytic models of penetration into ceramic/metal targets.In the present research,a modified model based on radius of ceramic cone was presented for ceramic/aluminum targets.In order to investigate and evaluate accuracy of the presented analytic model,obtained results were compared against the results of the Florence’s analytic model and also against numerical modeling results.The phenomenon of impact onto ceramic/aluminum composites were modeled using smoothed particle hydrodynamics(SPH)implemented utilizing ABAQUS Software.Results indicated that,with increasing initial velocity and ceramic thickness and decreasing support layer thickness,the radius of ceramic cone decreases;this ends up increasing residual velocity of the projectile and penetration time and extending the area across which the pressure is distributed.These findings indicate enhanced levels of target energy absorption and the required energy for bending and tensioning the target.As such,it can be observed that,at the same thickness and areal density,the ceramic target has its efficiency enhanced with increasing ceramic thickness and decreasing the support layer thickness.Finally,the results revealed that the associated data with SPH confirm the modified analytic model at higher accuracy than the Florence’s analytic model.
基金Project(51675061)supported by the National Natural Science Foundation of China
文摘The hot compressive deformation behaviors of Cu-6wt.%Ag alloy were studied experimentally in the temperature range of 973.1123 K and the strain rate range of 0.01.10 s^-1.The stress increases and reaches the maximum value when the true strain is very small,and then the stress changes slowly and tends to be stable under the action of work hardening,dynamic recovery and recrystallization.The material parameters of the conventional Arrhenius constitutive model are only related to strain under different deformation conditions,and the prediction error is large,which cannot accurately characterize the hot deformation behavior of the alloy.To describe the hot deformation behavior of the alloy accurately,a modified constitutive model was established by considering the simultaneous influence of forming temperature,strain rate and strain.The results indicate that correlation coefficient(R)and the average absolute relative error(AARE)are 0.993 and 4.2%,respectively.The modified constitutive model can accurately describe the hot deformation behavior of Cu-6wt.%Ag alloy.
基金Supported by the National Natural Science Foundation of China(No.29576238).
文摘Taking into account the viscoelasticity of the fenugreek gum, a modified Maxwell model in terms of fractional derivatives is developed. Using this model, it is observed that the fenugreek gums with at least two different concentrations obey the Cox-Merz rule.
基金Sponsored by National Natural Science Foundation of China and Baosteel(51274026,50874129)National High-tech Research and Development Program of China(2009AA06Z105)
文摘The theoretical flame temperature （TFT） before tuyere, always highly concerned by blast furnace （BF） operators, is one of the most important parameters for evaluating the thermal state of hearth. However, some influ- encing parameters, for example, the SiO2 reduction by carbon, were always neglected or inaccurate when calculating the TFT. According to the definition of TFT, the temperature of coke into raceway and the reduction rate of SiO2 in ash of coke and pulverized coal were obtained by analyzing the samples before tuyere in blast furnace. Taking full ac- count of different factors, a modified model for calculating the TFT in blast furnace was established. The effects of the oxygen enrichment rate, the reduction rate of SiO2 in raceway, the ash content in coke and pulverized coal and the pulverized coal injection （PCI） rate on TFT were determined quantitatively. The modified model was applied to selecting the used coal for PCI in blast furnace. Considering the different SiO2 contents of mixed coal, the calculated TFT remained a stable level. This showed that the selected coal could be suitable for PCI in blast furnace.
