This study aims to realize the sharing of near-infrared analysis models of lignin and holocellulose content in pulp wood on two different batches of spectrometers and proposes a combined algorithm of SPA-DS,MCUVE-DS a...This study aims to realize the sharing of near-infrared analysis models of lignin and holocellulose content in pulp wood on two different batches of spectrometers and proposes a combined algorithm of SPA-DS,MCUVE-DS and SiPLS-DS.The Successive Projection Algorithm(SPA),the Monte-Carlo of Uninformative Variable Elimination(MCUVE)and the Synergy Interval Partial Least Squares(SiPLS)algorithms are respectively used to reduce the adverse effects of redundant information in the transmission process of the full spectrum DS algorithm model.These three algorithms can improve model transfer accuracy and efficiency and reduce the manpower and material consumption required for modeling.These results show that the modeling effects of the characteristic wavelengths screened by the SPA,MCUVE and SiPLS algorithms are all greatly improved compared with the full-spectrum modeling,in which the SPA-PLS result in the best prediction with RPDs above 6.5 for both components.The three wavelength selection methods combined with the DS algorithm are used to transfer the models of the two instruments.Among them,the MCUVE combined with the DS algorithm has the best transfer effect.After the model transfer,the RMSEP of lignin is 0.701,and the RMSEP of holocellulose is 0.839,which was improved significantly than the full-spectrum model transfer of 0.759 and 0.918.展开更多
Fault diagnosis is an important measure to ensure the safety of production, and all kinds of fault diagnosis methods are of importance in actual production process. However, the complexity and uncertainty of productio...Fault diagnosis is an important measure to ensure the safety of production, and all kinds of fault diagnosis methods are of importance in actual production process. However, the complexity and uncertainty of production process often lead to the changes of data distribution and the emergence of new fault classes, and the number of the new fault classes is unpredictable. The reconstruction of the fault diagnosis model and the identification of new fault classes have become core issues under the circumstances. This paper presents a fault diagnosis method based on model transfer learning and the main contributions of the paper are as follows: 1) An incremental model transfer fault diagnosis method is proposed to reconstruct the new process diagnosis model. 2) Breaking the limit of existing method that the new process can only have one more class of faults than the old process, this method can identify M faults more in the new process with the thought of incremental learning. 3) The method offers a solution to a series of problems caused by the increase of fault classes. Experiments based on Tennessee-Eastman process and ore grinding classification process demonstrate the effectiveness and the feasibility of the method.展开更多
Accurate satellite data assimilation under all-sky conditions requires enhanced parameterization of scattering properties for frozen hydrometeors in clouds.This study aims to develop a nonspherical scattering look-up ...Accurate satellite data assimilation under all-sky conditions requires enhanced parameterization of scattering properties for frozen hydrometeors in clouds.This study aims to develop a nonspherical scattering look-up table that contains the optical properties of five hydrometeor types—rain,cloud water,cloud ice,graupel,and snow—for the Advanced Radiative Transfer Modeling System(ARMS)at frequencies below 220 GHz.The discrete dipole approximation(DDA)method is employed to compute the single-scattering properties of solid cloud particles,modeling these particles as aggregated roughened bullet rosettes.The bulk optical properties of the cloud layer are derived by integrating the singlescattering properties with a modified Gamma size distribution,specifically for distributions with 18 effective radii.The bulk phase function is then projected onto a series of generalized spherical functions,applying the delta-M method for truncation.The results indicate that simulations using the newly developed nonspherical scattering look-up table exhibit significant consistency with observations under deep convection conditions.In contrast,assuming spherical solid cloud particles leads to excessive scattering at mid-frequency channels and insufficient scattering at high-frequency channels.This improvement in radiative transfer simulation accuracy for cloudy conditions will better support the assimilation of allsky microwave observations into numerical weather prediction models.·Frozen cloud particles were modeled as aggregates of bullet rosettes and the optical properties at microwave range were computed by DDA.·A complete process and technical details for constructing a look-up table of ARMS are provided.·The ARMS simulations generally show agreement with observations of MWTS and MWHS under typhoon conditions using the new look-up table.展开更多
The damped Helmholtz-Duffing oscillator is a topic of great interest in many different fields of study due to its complex dynamics.By transitioning from conventional continuous differential equations to their fractal ...The damped Helmholtz-Duffing oscillator is a topic of great interest in many different fields of study due to its complex dynamics.By transitioning from conventional continuous differential equations to their fractal counterparts,one gains insights into the system's response under new mathematical frameworks.This paper presents a novel method for converting standard continuous differential equations into their fractal equivalents.This conversion occurs after the nonlinear system is transformed into its linear equivalent.Numerical analyses show that there are several resonance sites in the fractal system,which differ from the one resonance point found in the continuous system.One important finding is that the fractal system loses some of its stabilizing power when decaying behavior is transformed into a diffuse pattern.Interestingly,a decrease in the fractal order in resonance settings shows a stabilizing impact,highlighting the dynamics'complexity inside fractal systems.This endeavor to convert to fractals is a revolutionary technique that is being employed for the first time.展开更多
Conventional model transfer techniques,requiring the labelled source data,are not applicable in the privacy-protected medical fields.For the challenging scenarios,recent source data-free domain adaptation(SFDA)has bec...Conventional model transfer techniques,requiring the labelled source data,are not applicable in the privacy-protected medical fields.For the challenging scenarios,recent source data-free domain adaptation(SFDA)has become a mainstream solution but losing focus on the inter-sample class information.This paper proposes a new Credible Local Context Representation approach for SFDA.Our main idea is to exploit the credible local context for more discriminative representation.Specifically,we enhance the source model's discrimination by information regulating.To capture the context,a discovery method is developed that performs fixed steps walking in deep space and takes the credible features in this path as the context.In the epoch-wise adaptation,deep clustering-like training is conducted with two major updates.First,the context for all target data is constructed and then the context-fused pseudo-labels providing semantic guidance are generated.Second,for each target data,a weighting fusion on its context forms the anchored neighbourhood structure;thus,the deep clustering is switched from individual-based to coarse-grained.Also,a new regularisation building is developed on the anchored neighbourhood to drive the deep coarse-grained learning.Experiments on three benchmarks indicate that the proposed method can achieve stateof-the-art results.展开更多
Thin-film composite(TFC)reverse osmosis(RO)membranes have attracted considerable attention in water treatment and desalination processes due to their specific separation advantages.Nevertheless,the trade-off effect be...Thin-film composite(TFC)reverse osmosis(RO)membranes have attracted considerable attention in water treatment and desalination processes due to their specific separation advantages.Nevertheless,the trade-off effect between water flux and salt rejection poses huge challenges to further improvement in TFC RO membrane performance.Numerous research works have been dedicated to optimizing membrane fabrication and modification for addressing this issue.In the meantime,several reviews summarized these approaches.However,the existing reviews seldom analyzed these methods from a theoretical perspective and thus failed to offer effective optimization directions for the RO process from the root cause.In this review,we first propose a mass transfer model to facilitate a better understanding of the entire process of how water and solute permeate through RO membranes in detail,namely the migration process outside the membrane,the dissolution process on the membrane surface,and the diffusion process within the membrane.Thereafter,the water and salt mass transfer behaviors obtained from model deduction are comprehensively analyzed to provide potential guidelines for alleviating the trade-off effect between water flux and salt rejection in the RO process.Finally,inspired by the theoretical analysis and the accurate identification of existing bottlenecks,several promising strategies for both regulating RO membranes and optimizing operational conditions are proposed to further exploit the potential of RO membrane performance.This review is expected to guide the development of high-performance RO membranes from a mass transfer theory standpoint.展开更多
In this work, we present numerical modelling of coupled heat and mass transfer within porous materials. Our study focuses on cinder block bricks generally used in building construction. The material is assumed to be p...In this work, we present numerical modelling of coupled heat and mass transfer within porous materials. Our study focuses on cinder block bricks generally used in building construction. The material is assumed to be placed in air. Moisture content and temperature have been chosen as the main transfer drivers and the equations governing these transfer drivers are based on the Luikov model. These equations are solved by an implicit finite difference scheme. A Fortran code associated with the Thomas algorithm was used to solve the equations. The results show that heat and mass transfer depend on the temperature of the air in contact with the material. As this air temperature rises, the temperature within the material increases, and more rapidly at the material surface. Also, thermal conductivity plays a very important role in the thermal conduction of building materials and influences heat and mass transfer in these materials. Materials with higher thermal conductivity diffuse more heat.展开更多
Herein,the liquid-solid mass trans fer characteristics in micropacked bed reactors(μPBRs)operated with immiscible liquid-liquid two-phase flow is experimentally investigated.It is found that the overall volumetric li...Herein,the liquid-solid mass trans fer characteristics in micropacked bed reactors(μPBRs)operated with immiscible liquid-liquid two-phase flow is experimentally investigated.It is found that the overall volumetric liquid-solid mass transfer coefficient(k_(s)a)increases with the total flow rate and the channelto-particle diameter ratio,while decreases with the organic-to-aqueous phase flow rate ratio.A satisfactory correlation model for calculating k_(s)a of the liquid-liquid μPBRs is developed.The new knowledge obtained would be useful in guiding the design and optimization of the liquid-liquid μPBRs.展开更多
This work aims at the mathematical modeling of a parabolic trough concentrator, the numerical resolution of the resulting equation, as well as the simulation of the heat transfer fluid heating process. To do this, a t...This work aims at the mathematical modeling of a parabolic trough concentrator, the numerical resolution of the resulting equation, as well as the simulation of the heat transfer fluid heating process. To do this, a thermal balance was established for the heat transfer fluid, the absorber and the glass. This allowed us to establish an equation system whose resolution was done by the finite difference method. Then, a computer program was developed to simulate the temperatures of the heat transfer fluid, the absorber tube and the glass as a function of time and space. The numerical resolution made it possible to obtain the temperatures of the heat transfer fluid, the absorber and the glass. The simulation of the fluid heating process was done in one-hour time steps, from six in the morning to six in the afternoon. The results obtained show that the temperature difference between the inlet and the outlet of the sensor is very significant. These results obtained, regarding the variation of the temperatures of the heat transfer fluid, the absorber and the glass, as well as the powers and efficiency of the parabolic trough concentrator and various factors, allow for the improvement of the performances of our prototype.展开更多
In order to solve for temperature fields in microwave heating for recycling asphalt mixtures, a two-dimensional heat transfer model for the asphalt mixtures within the heating range is built based on the theory of uns...In order to solve for temperature fields in microwave heating for recycling asphalt mixtures, a two-dimensional heat transfer model for the asphalt mixtures within the heating range is built based on the theory of unsteady heat conduction. Four onedimensional heat transfer models are established for the asphalt mixtures outside the heating range, which are simplified into four half-infinite solids. The intensity of the radiation electric field is calculated through experiment by using heating water loads. It is suggested that the mathematical model of boundary conditions can be established in two ways, which are theoretical deduction and experimental reverse. The actual temperature field is achieved by fitting temperatures of different positions collected in the heating experiment. The simulant temperature field, which is solved with the Matlab PDE toolbox, is in good agreement with the actual temperature field. The results indicate that the proposed models have high precision and can be directly used to calculate the temperature distribution of asphalt pavements.展开更多
In this paper, a generalized layered model for radiation transfer in canopy with high vertical resolution is developed. Differing from the two-stream approximate radiation transfer model commonly used in the land surf...In this paper, a generalized layered model for radiation transfer in canopy with high vertical resolution is developed. Differing from the two-stream approximate radiation transfer model commonly used in the land surface models, the generalized model takes into account the effect of complicated canopy morphology and inhomogeneous optical properties of leaves on radiation transfer within the canopy. In the model, the total leaf area index （LAI） of the canopy is divided into many layers. At a given layer, the influences of diffuse radiation angle distributions and leaf angle distributions on radiation transfer within the canopy are considered. The derivation of equations serving the model are described in detail, and these can deal with various diffuse radiation transfers in quite broad categories of canopy with quite inhomogeneons vertical structures and uneven leaves with substantially different optical properties of adaxial and abaxial faces of the leaves. The model is used to simulate the radiation transfer for canopies with horizontal leaves to validate the generalized model. Results from the model are compared with those from the two-stream scheme, and differences between these two models are discussed.展开更多
The load transfer analytical method is applied to study the bearing mechanism of piles with vertical load in this paper. According to the different hardening rules of soil or rock around the pile shaft, such as work-s...The load transfer analytical method is applied to study the bearing mechanism of piles with vertical load in this paper. According to the different hardening rules of soil or rock around the pile shaft, such as work-softening, ideal elasto-plastic and work-hardening, a universal tri-linear load transfer model is suggested for the development of side and tip resistance by various types of soil (rock) with the consideration of sediment at the bottom of the pile. Based on the model, a formula is derived for the relationship between the settlement and load on the pile top to determine the vertical bearing capacity, taking into account such factors as the characteristics of the stratum, the side resistance along the shaft, and tip resistance under the pile tip. A close agreement of the calculated results with the measured data from a field test pile lends confidence to the future application of the present approach in engineering practice.展开更多
Gear fault diagnosis technologies have received rapid development and been effectively implemented in many engineering applications.However,the various working conditions would degrade the diagnostic performance and m...Gear fault diagnosis technologies have received rapid development and been effectively implemented in many engineering applications.However,the various working conditions would degrade the diagnostic performance and make gear fault diagnosis(GFD)more and more challenging.In this paper,a novel model parameter transfer(NMPT)is proposed to boost the performance of GFD under varying working conditions.Based on the previous transfer strategy that controls empirical risk of source domain,this method further integrates the superiorities of multi-task learning with the idea of transfer learning(TL)to acquire transferable knowledge by minimizing the discrepancies of separating hyperplanes between one specific working condition(target domain)and another(source domain),and then transferring both commonality and specialty parameters over tasks to make use of source domain samples to assist target GFD task when sufficient labeled samples from target domain are unavailable.For NMPT implementation,insufficient target domain features and abundant source domain features with supervised information are fed into NMPT model to train a robust classifier for target GFD task.Related experiments prove that NMPT is expected to be a valuable technology to boost practical GFD performance under various working conditions.The proposed methods provides a transfer learning-based framework to handle the problem of insufficient training samples in target task caused by variable operation conditions.展开更多
It is well known that automatic speech recognition(ASR) is a resource consuming task. It takes sufficient amount of data to train a state-of-the-art deep neural network acoustic model. As for some low-resource languag...It is well known that automatic speech recognition(ASR) is a resource consuming task. It takes sufficient amount of data to train a state-of-the-art deep neural network acoustic model. As for some low-resource languages where scripted speech is difficult to obtain, data sparsity is the main problem that limits the performance of speech recognition system. In this paper, several knowledge transfer methods are investigated to overcome the data sparsity problem with the help of high-resource languages.The first one is a pre-training and fine-tuning(PT/FT) method, in which the parameters of hidden layers are initialized with a welltrained neural network. Secondly, the progressive neural networks(Prognets) are investigated. With the help of lateral connections in the network architecture, Prognets are immune to forgetting effect and superior in knowledge transferring. Finally,bottleneck features(BNF) are extracted using cross-lingual deep neural networks and serves as an enhanced feature to improve the performance of ASR system. Experiments are conducted in a low-resource Vietnamese dataset. The results show that all three methods yield significant gains over the baseline system, and the Prognets acoustic model performs the best. Further improvements can be obtained by combining the Prognets model and bottleneck features.展开更多
In this paper, firstly, a simplified version （SGRTM） of the generalized layered radiative transfer model （GRTM） within the canopy, developed by us, is presented. It reduces the information requirement of inputted ...In this paper, firstly, a simplified version （SGRTM） of the generalized layered radiative transfer model （GRTM） within the canopy, developed by us, is presented. It reduces the information requirement of inputted sky diffuse radiation, as well as of canopy morphology, and in turn saves computer resources. Results from the SGRTM agree perfectly with those of the GRTM. Secondly, by applying the linear superposition principle of the optics and by using the basic solutions of the GRTM for radiative transfer within the canopy under the condition of assumed zero soil reflectance, two sets of explicit analytical solutions of radiative transfer within the canopy with any soil reflectance magnitude are derived： one for incident diffuse, and the other for direct beam radiation. The explicit analytical solutions need two sets of basic solutions of canopy reflectance and transmittance under zero soil reflectance, run by the model for both diffuse and direct beam radiation. One set of basic solutions is the canopy reflectance αf （written as α1 for direct beam radiation） and transmittance βf （written as β1 for direction beam radiation） with zero soil reflectance for the downward radiation from above the canopy （i.e. sky）, and the other set is the canopy reflectance （αb） and transmittance βb for the upward radiation from below the canopy （i.e., ground）. Under the condition of the same plant architecture in the vertical layers, and the same leaf adaxial and abaxial optical properties in the canopies for the uniform diffuse radiation, the explicit solutions need only one set of basic solutions, because under this condition the two basic solutions are equal, i.e., αf = αb and βf = βb. Using the explicit analytical solutions, the fractions of any kind of incident solar radiation reflected from （defined as surface albedo, or canopy reflectance）, transmitted through （defined as canopy transmittance）, and absorbed by （defined as canopy absorptance） the canopy and other properties pertinent to the radiative transfer within the canopy can be estimated easily on the ground surface below the canopy （soil or snow surface） with any reflectance magnitudes. The simplified transfer model is proven to have a similar accuracy compared to the detailed model, as well as very efficient computing.展开更多
Purpose:To evaluate the efficacy of the Seamless Transfer of Care Model(STCM)to improve readmission occurrence of patients withstroke.Methods:The sample was comprised of fifty-nine subjects with stroke who were hospit...Purpose:To evaluate the efficacy of the Seamless Transfer of Care Model(STCM)to improve readmission occurrence of patients withstroke.Methods:The sample was comprised of fifty-nine subjects with stroke who were hospitalized in the geriatric and neurology departments of a large university hospital in China.Subjects were allocated to an STCM group(n=30)or a routine care(control)group(n=29).Results:Compared with the control group,the STCM group had a higher quality of life(p<0.05),higher compliance(p<0.05)and a lower readmission rate(p<0.05).Conclusion:Based on our results,the application of the STCM in Chinese stroke patients can improve quality of life and compliance,and reduce readmission rate.展开更多
Hydrothermal processes are key components in permafrost dynamics; these processes are integral to global wanning. In this study the coupled heat and mass transfer model for （CoupModel） the soil-plant-atmosphere-syst...Hydrothermal processes are key components in permafrost dynamics; these processes are integral to global wanning. In this study the coupled heat and mass transfer model for （CoupModel） the soil-plant-atmosphere-system is applied in high-altitude permafrost regions and to model hydrothermal transfer processes in freeze-thaw cycles. Measured meteorological forcing and soil and vegetation properties are used in the CoupModel for the period from January 1, 2009 to December 31, 2012 at the Tanggula observation site in the Qinghai-Tibet Plateau. A 24-h time step is used in the model simulation. The results show that the simulated soil temperature and water content, as well as the frozen depth compare well with the measured data. The coefficient of determination （R2） is 0.97 for the mean soil temperature and 0.73 for the mean soil water content, respectively. The simulated soil heat flux at a depth of 0-20 cm is also consistent with the monitored data. An analysis is performed on the simulated hydrothermal transfer processes from the deep soil layer to the upper one during the freezing and thawing period. At the beginning of the freezing period, the water in the deep soil layer moves upward to the freezing front and releases heat during the freezing process. When the soil layer is completely frozen, there are no vertical water ex- changes between the soil layers, and the heat exchange process is controlled by the vertical soil temperature gradient. During the thaw- ing period, the downward heat process becomes more active due to increased incoming shortwave radiation at the ground surface. The melt water is quickly dissolved in the soil, and the soil water movement only changes in the shallow soil layer. Subsequently, the model was used to provide an evaluation of the potential response of the active layer to different scenarios of initial water content and climate warming at the Tanggula site. The results reveal that the soil water content and the organic layer provide protection against active layer deepening in summer, so climate warming will cause the permafrost active layer to become deeoer and permafrost degradation.展开更多
A two-dimensional mathematical model was developed to describe the heat transfer and fluid flow in an AC arc zone of a ferrosilicon submerged arc furnace. In this model, the time-dependent conservation equations of ma...A two-dimensional mathematical model was developed to describe the heat transfer and fluid flow in an AC arc zone of a ferrosilicon submerged arc furnace. In this model, the time-dependent conservation equations of mass, momentum, and energy in the specified domain of plasma zone were numerically solved by coupling with the Maxwell and Laplace equations for magnetic filed and electric potential, respectively. A control volume-based finite difference method was used to solve the governing equations in cylindrical coordinates. The reliability of the developed model was checked by experimental data from the previous available literature. The results of present model were in good agreement with the given data comparing with other models, because of solving the Maxwell and Laplace equations simul- taneously in order to calculate current density. In addition, parametric studies were carried out to evaluate the effects of electrical current and arc length on flow field and temperature distribution within the arc. According to the computed results, a lower power input led to a higher arc efficiency.展开更多
The accurate simulation of boundary layer transition process plays a very important role in the prediction of turbine blade temperature field. Based on the Abu-Ghannam and Shaw （AGS） and c-Re h transition models, a ...The accurate simulation of boundary layer transition process plays a very important role in the prediction of turbine blade temperature field. Based on the Abu-Ghannam and Shaw （AGS） and c-Re h transition models, a 3D conjugate heat transfer solver is developed, where the fluid domain is discretized by multi-block structured grids, and the solid domain is discretized by unstructured grids. At the unmatched fluid/solid interface, the shape function interpolation method is adopted to ensure the conservation of the interfacial heat flux. Then the shear stress transport （SST） model, SST ＆ AGS model and SST ＆ c-Re h model are used to investigate the flow and heat transfer characteristics of Mark II turbine vane. The results indicate that compared with the full turbulence model （SST model）, the transition models could improve the prediction accuracy of temperature and heat transfer coefficient at the laminar zone near the blade leading edge. Compared with the AGS transition model, the c-Re h model could predict the transition onset location induced by shock/boundary layer interaction more accurately, and the prediction accuracy of temperature field could be greatly improved.展开更多
Forward radiative transfer(RT)models are essential for atmospheric applications such as remote sensing and weather and climate models,where computational efficiency becomes equally as important as accuracy for high-re...Forward radiative transfer(RT)models are essential for atmospheric applications such as remote sensing and weather and climate models,where computational efficiency becomes equally as important as accuracy for high-resolution hyperspectral measurements that need rigorous RT simulations for thousands of channels.This study introduces a fast and accurate RT model for the hyperspectral infrared(HIR)sounder based on principal component analysis(PCA)or machine learning(i.e.,neural network,NN).The Geosynchronous Interferometric Infrared Sounder(GIIRS),the first HIR sounder onboard the geostationary Fengyun-4 satellites,is considered to be a candidate example for model development and validation.Our method uses either PCA or NN(PCA/NN)twice for the atmospheric transmittance and radiance,respectively,to reduce the number of independent but similar simulations to accelerate RT simulations;thereby,it is referred to as a multi-domain compression model.The first PCA/NN gives monochromatic gas transmittance in both spectral and atmospheric pressure domains for each gas independently.The second PCA/NN is performed in the traditional spectral radiance domain.Meanwhile,a new method is introduced to choose representative variables for the PCA/NN scheme developments.The model is three orders of magnitude faster than the standard line-by-line-based simulations with averaged brightness temperature difference(BTD)less than 0.1 K,and the compressions based on PCA or NN methods result in comparable efficiency and accuracy.Our fast model not only avoids an excessively complicated transmittance scheme by using PCA/NN but is also highly flexible for hyperspectral instruments with similar spectral ranges simply by updating the corresponding spectral response functions.展开更多
基金The authors are grateful for the support of the Fundamental Research Funds of Research Institute of Forest New Technology,CAF(CAFYBB2019SY039).
文摘This study aims to realize the sharing of near-infrared analysis models of lignin and holocellulose content in pulp wood on two different batches of spectrometers and proposes a combined algorithm of SPA-DS,MCUVE-DS and SiPLS-DS.The Successive Projection Algorithm(SPA),the Monte-Carlo of Uninformative Variable Elimination(MCUVE)and the Synergy Interval Partial Least Squares(SiPLS)algorithms are respectively used to reduce the adverse effects of redundant information in the transmission process of the full spectrum DS algorithm model.These three algorithms can improve model transfer accuracy and efficiency and reduce the manpower and material consumption required for modeling.These results show that the modeling effects of the characteristic wavelengths screened by the SPA,MCUVE and SiPLS algorithms are all greatly improved compared with the full-spectrum modeling,in which the SPA-PLS result in the best prediction with RPDs above 6.5 for both components.The three wavelength selection methods combined with the DS algorithm are used to transfer the models of the two instruments.Among them,the MCUVE combined with the DS algorithm has the best transfer effect.After the model transfer,the RMSEP of lignin is 0.701,and the RMSEP of holocellulose is 0.839,which was improved significantly than the full-spectrum model transfer of 0.759 and 0.918.
文摘Fault diagnosis is an important measure to ensure the safety of production, and all kinds of fault diagnosis methods are of importance in actual production process. However, the complexity and uncertainty of production process often lead to the changes of data distribution and the emergence of new fault classes, and the number of the new fault classes is unpredictable. The reconstruction of the fault diagnosis model and the identification of new fault classes have become core issues under the circumstances. This paper presents a fault diagnosis method based on model transfer learning and the main contributions of the paper are as follows: 1) An incremental model transfer fault diagnosis method is proposed to reconstruct the new process diagnosis model. 2) Breaking the limit of existing method that the new process can only have one more class of faults than the old process, this method can identify M faults more in the new process with the thought of incremental learning. 3) The method offers a solution to a series of problems caused by the increase of fault classes. Experiments based on Tennessee-Eastman process and ore grinding classification process demonstrate the effectiveness and the feasibility of the method.
基金supported by the National Key Research and Development Program of China(Grant No.2021YFB3900400)the National Natural Science Foundation of China(Grant Nos.U2142212 and 42361074)。
文摘Accurate satellite data assimilation under all-sky conditions requires enhanced parameterization of scattering properties for frozen hydrometeors in clouds.This study aims to develop a nonspherical scattering look-up table that contains the optical properties of five hydrometeor types—rain,cloud water,cloud ice,graupel,and snow—for the Advanced Radiative Transfer Modeling System(ARMS)at frequencies below 220 GHz.The discrete dipole approximation(DDA)method is employed to compute the single-scattering properties of solid cloud particles,modeling these particles as aggregated roughened bullet rosettes.The bulk optical properties of the cloud layer are derived by integrating the singlescattering properties with a modified Gamma size distribution,specifically for distributions with 18 effective radii.The bulk phase function is then projected onto a series of generalized spherical functions,applying the delta-M method for truncation.The results indicate that simulations using the newly developed nonspherical scattering look-up table exhibit significant consistency with observations under deep convection conditions.In contrast,assuming spherical solid cloud particles leads to excessive scattering at mid-frequency channels and insufficient scattering at high-frequency channels.This improvement in radiative transfer simulation accuracy for cloudy conditions will better support the assimilation of allsky microwave observations into numerical weather prediction models.·Frozen cloud particles were modeled as aggregates of bullet rosettes and the optical properties at microwave range were computed by DDA.·A complete process and technical details for constructing a look-up table of ARMS are provided.·The ARMS simulations generally show agreement with observations of MWTS and MWHS under typhoon conditions using the new look-up table.
文摘The damped Helmholtz-Duffing oscillator is a topic of great interest in many different fields of study due to its complex dynamics.By transitioning from conventional continuous differential equations to their fractal counterparts,one gains insights into the system's response under new mathematical frameworks.This paper presents a novel method for converting standard continuous differential equations into their fractal equivalents.This conversion occurs after the nonlinear system is transformed into its linear equivalent.Numerical analyses show that there are several resonance sites in the fractal system,which differ from the one resonance point found in the continuous system.One important finding is that the fractal system loses some of its stabilizing power when decaying behavior is transformed into a diffuse pattern.Interestingly,a decrease in the fractal order in resonance settings shows a stabilizing impact,highlighting the dynamics'complexity inside fractal systems.This endeavor to convert to fractals is a revolutionary technique that is being employed for the first time.
基金National Key R&D Program of China,Grant/Award Numbers:2018YFE0203900,2020YFB1313600German Research Foundation,Hamburg Landesforschungsförderungsprojekt Cross,Grant/Award Number:Sonderforschungsbereich Transregio 169+2 种基金Shanghai Artificial Intelligence Innovation Development Special Support Project,Grant/Award Number:3920365001Horizon2020 RISE project STEP2DYNA,Grant/Award Number:691154National Natural Science Foundation of China,Grant/Award Numbers:61773083,62206168,62276048,U1813202。
文摘Conventional model transfer techniques,requiring the labelled source data,are not applicable in the privacy-protected medical fields.For the challenging scenarios,recent source data-free domain adaptation(SFDA)has become a mainstream solution but losing focus on the inter-sample class information.This paper proposes a new Credible Local Context Representation approach for SFDA.Our main idea is to exploit the credible local context for more discriminative representation.Specifically,we enhance the source model's discrimination by information regulating.To capture the context,a discovery method is developed that performs fixed steps walking in deep space and takes the credible features in this path as the context.In the epoch-wise adaptation,deep clustering-like training is conducted with two major updates.First,the context for all target data is constructed and then the context-fused pseudo-labels providing semantic guidance are generated.Second,for each target data,a weighting fusion on its context forms the anchored neighbourhood structure;thus,the deep clustering is switched from individual-based to coarse-grained.Also,a new regularisation building is developed on the anchored neighbourhood to drive the deep coarse-grained learning.Experiments on three benchmarks indicate that the proposed method can achieve stateof-the-art results.
基金supported by the Natural Science Foundation of Sichuan Province(No.2022NSFSC1042)National Natural Science Foundation of China(No.52200051)+1 种基金Outstanding Youth Fund of Heilongjiang Natural Science Foundation(No.YQ2023E021)Open Project of State Key Laboratory of Urban Water Resource and Environment,Harbin Institute of Technology(No.HC202236).
文摘Thin-film composite(TFC)reverse osmosis(RO)membranes have attracted considerable attention in water treatment and desalination processes due to their specific separation advantages.Nevertheless,the trade-off effect between water flux and salt rejection poses huge challenges to further improvement in TFC RO membrane performance.Numerous research works have been dedicated to optimizing membrane fabrication and modification for addressing this issue.In the meantime,several reviews summarized these approaches.However,the existing reviews seldom analyzed these methods from a theoretical perspective and thus failed to offer effective optimization directions for the RO process from the root cause.In this review,we first propose a mass transfer model to facilitate a better understanding of the entire process of how water and solute permeate through RO membranes in detail,namely the migration process outside the membrane,the dissolution process on the membrane surface,and the diffusion process within the membrane.Thereafter,the water and salt mass transfer behaviors obtained from model deduction are comprehensively analyzed to provide potential guidelines for alleviating the trade-off effect between water flux and salt rejection in the RO process.Finally,inspired by the theoretical analysis and the accurate identification of existing bottlenecks,several promising strategies for both regulating RO membranes and optimizing operational conditions are proposed to further exploit the potential of RO membrane performance.This review is expected to guide the development of high-performance RO membranes from a mass transfer theory standpoint.
文摘In this work, we present numerical modelling of coupled heat and mass transfer within porous materials. Our study focuses on cinder block bricks generally used in building construction. The material is assumed to be placed in air. Moisture content and temperature have been chosen as the main transfer drivers and the equations governing these transfer drivers are based on the Luikov model. These equations are solved by an implicit finite difference scheme. A Fortran code associated with the Thomas algorithm was used to solve the equations. The results show that heat and mass transfer depend on the temperature of the air in contact with the material. As this air temperature rises, the temperature within the material increases, and more rapidly at the material surface. Also, thermal conductivity plays a very important role in the thermal conduction of building materials and influences heat and mass transfer in these materials. Materials with higher thermal conductivity diffuse more heat.
文摘Herein,the liquid-solid mass trans fer characteristics in micropacked bed reactors(μPBRs)operated with immiscible liquid-liquid two-phase flow is experimentally investigated.It is found that the overall volumetric liquid-solid mass transfer coefficient(k_(s)a)increases with the total flow rate and the channelto-particle diameter ratio,while decreases with the organic-to-aqueous phase flow rate ratio.A satisfactory correlation model for calculating k_(s)a of the liquid-liquid μPBRs is developed.The new knowledge obtained would be useful in guiding the design and optimization of the liquid-liquid μPBRs.
文摘This work aims at the mathematical modeling of a parabolic trough concentrator, the numerical resolution of the resulting equation, as well as the simulation of the heat transfer fluid heating process. To do this, a thermal balance was established for the heat transfer fluid, the absorber and the glass. This allowed us to establish an equation system whose resolution was done by the finite difference method. Then, a computer program was developed to simulate the temperatures of the heat transfer fluid, the absorber tube and the glass as a function of time and space. The numerical resolution made it possible to obtain the temperatures of the heat transfer fluid, the absorber and the glass. The simulation of the fluid heating process was done in one-hour time steps, from six in the morning to six in the afternoon. The results obtained show that the temperature difference between the inlet and the outlet of the sensor is very significant. These results obtained, regarding the variation of the temperatures of the heat transfer fluid, the absorber and the glass, as well as the powers and efficiency of the parabolic trough concentrator and various factors, allow for the improvement of the performances of our prototype.
基金The Key Project of Science and Technology of Ministryof Education (No.105085)the Specialized Research Fund of Science andTechnology Production Translation of Jiangsu Province (No.BA2006068).
文摘In order to solve for temperature fields in microwave heating for recycling asphalt mixtures, a two-dimensional heat transfer model for the asphalt mixtures within the heating range is built based on the theory of unsteady heat conduction. Four onedimensional heat transfer models are established for the asphalt mixtures outside the heating range, which are simplified into four half-infinite solids. The intensity of the radiation electric field is calculated through experiment by using heating water loads. It is suggested that the mathematical model of boundary conditions can be established in two ways, which are theoretical deduction and experimental reverse. The actual temperature field is achieved by fitting temperatures of different positions collected in the heating experiment. The simulant temperature field, which is solved with the Matlab PDE toolbox, is in good agreement with the actual temperature field. The results indicate that the proposed models have high precision and can be directly used to calculate the temperature distribution of asphalt pavements.
文摘In this paper, a generalized layered model for radiation transfer in canopy with high vertical resolution is developed. Differing from the two-stream approximate radiation transfer model commonly used in the land surface models, the generalized model takes into account the effect of complicated canopy morphology and inhomogeneous optical properties of leaves on radiation transfer within the canopy. In the model, the total leaf area index （LAI） of the canopy is divided into many layers. At a given layer, the influences of diffuse radiation angle distributions and leaf angle distributions on radiation transfer within the canopy are considered. The derivation of equations serving the model are described in detail, and these can deal with various diffuse radiation transfers in quite broad categories of canopy with quite inhomogeneons vertical structures and uneven leaves with substantially different optical properties of adaxial and abaxial faces of the leaves. The model is used to simulate the radiation transfer for canopies with horizontal leaves to validate the generalized model. Results from the model are compared with those from the two-stream scheme, and differences between these two models are discussed.
文摘The load transfer analytical method is applied to study the bearing mechanism of piles with vertical load in this paper. According to the different hardening rules of soil or rock around the pile shaft, such as work-softening, ideal elasto-plastic and work-hardening, a universal tri-linear load transfer model is suggested for the development of side and tip resistance by various types of soil (rock) with the consideration of sediment at the bottom of the pile. Based on the model, a formula is derived for the relationship between the settlement and load on the pile top to determine the vertical bearing capacity, taking into account such factors as the characteristics of the stratum, the side resistance along the shaft, and tip resistance under the pile tip. A close agreement of the calculated results with the measured data from a field test pile lends confidence to the future application of the present approach in engineering practice.
基金Supported by National Natural Science Foundation of China(Grant No.51835009).
文摘Gear fault diagnosis technologies have received rapid development and been effectively implemented in many engineering applications.However,the various working conditions would degrade the diagnostic performance and make gear fault diagnosis(GFD)more and more challenging.In this paper,a novel model parameter transfer(NMPT)is proposed to boost the performance of GFD under varying working conditions.Based on the previous transfer strategy that controls empirical risk of source domain,this method further integrates the superiorities of multi-task learning with the idea of transfer learning(TL)to acquire transferable knowledge by minimizing the discrepancies of separating hyperplanes between one specific working condition(target domain)and another(source domain),and then transferring both commonality and specialty parameters over tasks to make use of source domain samples to assist target GFD task when sufficient labeled samples from target domain are unavailable.For NMPT implementation,insufficient target domain features and abundant source domain features with supervised information are fed into NMPT model to train a robust classifier for target GFD task.Related experiments prove that NMPT is expected to be a valuable technology to boost practical GFD performance under various working conditions.The proposed methods provides a transfer learning-based framework to handle the problem of insufficient training samples in target task caused by variable operation conditions.
基金partially supported by the National Natural Science Foundation of China(11590770-4,U1536117)the National Key Research and Development Program of China(2016YFB0801203,2016YFB0801200)+1 种基金the Key Science and Technology Project of the Xinjiang Uygur Autonomous Region(2016A03007-1)the Pre-research Project for Equipment of General Information System(JZX2017-0994/Y306)
文摘It is well known that automatic speech recognition(ASR) is a resource consuming task. It takes sufficient amount of data to train a state-of-the-art deep neural network acoustic model. As for some low-resource languages where scripted speech is difficult to obtain, data sparsity is the main problem that limits the performance of speech recognition system. In this paper, several knowledge transfer methods are investigated to overcome the data sparsity problem with the help of high-resource languages.The first one is a pre-training and fine-tuning(PT/FT) method, in which the parameters of hidden layers are initialized with a welltrained neural network. Secondly, the progressive neural networks(Prognets) are investigated. With the help of lateral connections in the network architecture, Prognets are immune to forgetting effect and superior in knowledge transferring. Finally,bottleneck features(BNF) are extracted using cross-lingual deep neural networks and serves as an enhanced feature to improve the performance of ASR system. Experiments are conducted in a low-resource Vietnamese dataset. The results show that all three methods yield significant gains over the baseline system, and the Prognets acoustic model performs the best. Further improvements can be obtained by combining the Prognets model and bottleneck features.
基金This work was supported by the National Natural Science Foundation of China under Grant Nos. 40233034, 40575043the Chinese Academy of Sciences （KZCX3_SW_229）.
文摘In this paper, firstly, a simplified version （SGRTM） of the generalized layered radiative transfer model （GRTM） within the canopy, developed by us, is presented. It reduces the information requirement of inputted sky diffuse radiation, as well as of canopy morphology, and in turn saves computer resources. Results from the SGRTM agree perfectly with those of the GRTM. Secondly, by applying the linear superposition principle of the optics and by using the basic solutions of the GRTM for radiative transfer within the canopy under the condition of assumed zero soil reflectance, two sets of explicit analytical solutions of radiative transfer within the canopy with any soil reflectance magnitude are derived： one for incident diffuse, and the other for direct beam radiation. The explicit analytical solutions need two sets of basic solutions of canopy reflectance and transmittance under zero soil reflectance, run by the model for both diffuse and direct beam radiation. One set of basic solutions is the canopy reflectance αf （written as α1 for direct beam radiation） and transmittance βf （written as β1 for direction beam radiation） with zero soil reflectance for the downward radiation from above the canopy （i.e. sky）, and the other set is the canopy reflectance （αb） and transmittance βb for the upward radiation from below the canopy （i.e., ground）. Under the condition of the same plant architecture in the vertical layers, and the same leaf adaxial and abaxial optical properties in the canopies for the uniform diffuse radiation, the explicit solutions need only one set of basic solutions, because under this condition the two basic solutions are equal, i.e., αf = αb and βf = βb. Using the explicit analytical solutions, the fractions of any kind of incident solar radiation reflected from （defined as surface albedo, or canopy reflectance）, transmitted through （defined as canopy transmittance）, and absorbed by （defined as canopy absorptance） the canopy and other properties pertinent to the radiative transfer within the canopy can be estimated easily on the ground surface below the canopy （soil or snow surface） with any reflectance magnitudes. The simplified transfer model is proven to have a similar accuracy compared to the detailed model, as well as very efficient computing.
基金This study was supported by the Research Foundation of Fudan University(FNF201208)Health And Family Planning Commission Of Shanghai(201440090)and Minhang(2012MHZ028).
文摘Purpose:To evaluate the efficacy of the Seamless Transfer of Care Model(STCM)to improve readmission occurrence of patients withstroke.Methods:The sample was comprised of fifty-nine subjects with stroke who were hospitalized in the geriatric and neurology departments of a large university hospital in China.Subjects were allocated to an STCM group(n=30)or a routine care(control)group(n=29).Results:Compared with the control group,the STCM group had a higher quality of life(p<0.05),higher compliance(p<0.05)and a lower readmission rate(p<0.05).Conclusion:Based on our results,the application of the STCM in Chinese stroke patients can improve quality of life and compliance,and reduce readmission rate.
基金National Major Scientific Project of China(No.2013CBA01803)Science Fund for Creative Research Groups of National Natural Science Foundation of China(No.41121001)+1 种基金National Natural Science Foundation of China(No.41271081)Foundation of One Hundred Person Project of Chinese Academy of Sciences(No.51Y251571)
文摘Hydrothermal processes are key components in permafrost dynamics; these processes are integral to global wanning. In this study the coupled heat and mass transfer model for （CoupModel） the soil-plant-atmosphere-system is applied in high-altitude permafrost regions and to model hydrothermal transfer processes in freeze-thaw cycles. Measured meteorological forcing and soil and vegetation properties are used in the CoupModel for the period from January 1, 2009 to December 31, 2012 at the Tanggula observation site in the Qinghai-Tibet Plateau. A 24-h time step is used in the model simulation. The results show that the simulated soil temperature and water content, as well as the frozen depth compare well with the measured data. The coefficient of determination （R2） is 0.97 for the mean soil temperature and 0.73 for the mean soil water content, respectively. The simulated soil heat flux at a depth of 0-20 cm is also consistent with the monitored data. An analysis is performed on the simulated hydrothermal transfer processes from the deep soil layer to the upper one during the freezing and thawing period. At the beginning of the freezing period, the water in the deep soil layer moves upward to the freezing front and releases heat during the freezing process. When the soil layer is completely frozen, there are no vertical water ex- changes between the soil layers, and the heat exchange process is controlled by the vertical soil temperature gradient. During the thaw- ing period, the downward heat process becomes more active due to increased incoming shortwave radiation at the ground surface. The melt water is quickly dissolved in the soil, and the soil water movement only changes in the shallow soil layer. Subsequently, the model was used to provide an evaluation of the potential response of the active layer to different scenarios of initial water content and climate warming at the Tanggula site. The results reveal that the soil water content and the organic layer provide protection against active layer deepening in summer, so climate warming will cause the permafrost active layer to become deeoer and permafrost degradation.
文摘A two-dimensional mathematical model was developed to describe the heat transfer and fluid flow in an AC arc zone of a ferrosilicon submerged arc furnace. In this model, the time-dependent conservation equations of mass, momentum, and energy in the specified domain of plasma zone were numerically solved by coupling with the Maxwell and Laplace equations for magnetic filed and electric potential, respectively. A control volume-based finite difference method was used to solve the governing equations in cylindrical coordinates. The reliability of the developed model was checked by experimental data from the previous available literature. The results of present model were in good agreement with the given data comparing with other models, because of solving the Maxwell and Laplace equations simul- taneously in order to calculate current density. In addition, parametric studies were carried out to evaluate the effects of electrical current and arc length on flow field and temperature distribution within the arc. According to the computed results, a lower power input led to a higher arc efficiency.
基金National Natural Science Foundation of China(Grant No.91130013)Innovation Foundation of BUAA for PhD Graduates(YWF-12-RBYJ-010)Specialized Research Fund for the Doctoral Program of Higher Education(20101102110011)for funding this work
文摘The accurate simulation of boundary layer transition process plays a very important role in the prediction of turbine blade temperature field. Based on the Abu-Ghannam and Shaw （AGS） and c-Re h transition models, a 3D conjugate heat transfer solver is developed, where the fluid domain is discretized by multi-block structured grids, and the solid domain is discretized by unstructured grids. At the unmatched fluid/solid interface, the shape function interpolation method is adopted to ensure the conservation of the interfacial heat flux. Then the shear stress transport （SST） model, SST ＆ AGS model and SST ＆ c-Re h model are used to investigate the flow and heat transfer characteristics of Mark II turbine vane. The results indicate that compared with the full turbulence model （SST model）, the transition models could improve the prediction accuracy of temperature and heat transfer coefficient at the laminar zone near the blade leading edge. Compared with the AGS transition model, the c-Re h model could predict the transition onset location induced by shock/boundary layer interaction more accurately, and the prediction accuracy of temperature field could be greatly improved.
基金supported by the National Natural Science Foundation of China(Grant No.42122038)。
文摘Forward radiative transfer(RT)models are essential for atmospheric applications such as remote sensing and weather and climate models,where computational efficiency becomes equally as important as accuracy for high-resolution hyperspectral measurements that need rigorous RT simulations for thousands of channels.This study introduces a fast and accurate RT model for the hyperspectral infrared(HIR)sounder based on principal component analysis(PCA)or machine learning(i.e.,neural network,NN).The Geosynchronous Interferometric Infrared Sounder(GIIRS),the first HIR sounder onboard the geostationary Fengyun-4 satellites,is considered to be a candidate example for model development and validation.Our method uses either PCA or NN(PCA/NN)twice for the atmospheric transmittance and radiance,respectively,to reduce the number of independent but similar simulations to accelerate RT simulations;thereby,it is referred to as a multi-domain compression model.The first PCA/NN gives monochromatic gas transmittance in both spectral and atmospheric pressure domains for each gas independently.The second PCA/NN is performed in the traditional spectral radiance domain.Meanwhile,a new method is introduced to choose representative variables for the PCA/NN scheme developments.The model is three orders of magnitude faster than the standard line-by-line-based simulations with averaged brightness temperature difference(BTD)less than 0.1 K,and the compressions based on PCA or NN methods result in comparable efficiency and accuracy.Our fast model not only avoids an excessively complicated transmittance scheme by using PCA/NN but is also highly flexible for hyperspectral instruments with similar spectral ranges simply by updating the corresponding spectral response functions.
